2012 Blue Press - Dillon Precision

Blue PressBlue PressMay 2014

$2.95 U.S./$3.95 Canadathe

Just In,Special

Purchases,Bargains

and Close Outs

Page 81

Just In,Special

Purchases,Bargains

and Close Outs

Page 81

DP

Which Dillon

is Right for

YOU?Page 6

Which Dillon

is Right for

YOU?Page 6

RUGER® LIGHTWEIGHT, COMPACT HANDGUNS

LC9®

®

LC380®

LCP®

RUGER.COM/COMPACTHANDGUNS©2014 Sturm, Ruger & Co., Inc. 010714

2

Dillon’s RF 100Automatic Primer FillerDillon’s RF 100Automatic Primer Filler

Eliminates the need for primer pick-up tubes!

Fills the primer tube while you reload!

Clear polycarbonate shieldand protective housing

Dillon’s RF 100 Automatic PrimerFiller eliminates the task of fill-

ing primer pick up tubes. Now yousimply pour your primers from theirbox into the top, press the blue but-ton and watch it run!

In about two minutes the primersare inside the protective metal hous-ing. That’s about 30 rounds you canload while the RF 100 is doing yourwork for you!

The RF 100 is available for eitherlarge or small primers, and conver-sion kits are available at one lowprice of $47.95 each.Lg. Primer Filler K75-97077 $317.95Sm. Primer Filler K75-97111 317.95Lg. (Euro. 220v) K75-97112 327.95Sm. (Euro. 220v) K75-97113 327.95Sm. Conversion K75-17903 47.95Lg. Conversion K75-17902 47.95Nylon Packcloth Dust Cover K75-11143 14.95

3

Iwant to recognize the outstanding customer supportrendered to me recently by your support team, especial-

ly Eric. My RF100 Primer Filler began to jam primers intothe feed ramp, causing primers to stop falling into theprimer tube, or, worse yet, flip upside down, resulting inmy Super 1050 loading a round with an upside-downprimer. Most frustrating! Eric was able to diagnose theproblem and proceeded to send me a complete RF100update kit at no cost. The directions for modifying myelectric primer filler were clear and easy to follow. After afollow-up telephone call with Eric – for a minor shimadjustment to the stabilizer plate – I’m back in businesswith a tool working better than it ever has. Thanks, Dil-lon, for products which lead the industry in accuracy, reli-ability and customer support.

Ralph Talbot – San Antonio, TX

Ibought my first Dillon RL 550B some years ago. It hasbeen a fantastic press and I cannot even imagine how

many rounds I have loaded with it. I am a pistol shooter:9mm, .45 ACP, .45 Colt, and .38 Special. The 550B hasbeen a very reliable and fun press to use. Like others, Ithink I have as much fun reloading as I do shooting! So,since I shoot a LOT of 9mm, I thought I would take it tothe next step. I called in and talked over my needs withseveral of your very helpful folks on a couple of differentcalls. After consideration, I ordered a Super 1050. I set itup and OMG, what an incredible machine! Set up wasvery easy. I thought loading on the 550B was fast, easyand fun. This machine is like a Ferrari. Loading is smoothand easy. In my case, this machine will stay set up foronly 9mm. I will use my 550B for other calibers. Whydidn’t someone tell me about this before? I could havehad this set up years ago! Keep up the great work!

Bill Bregar – Marietta, GA

Irecently purchased a Square Deal B (about 17 yearsago) and I just sent it back because the mounting base

snapped. I received it back totally refurbished andupgraded in about three weeks. Plus, due to your No B.S.Warranty, there was no charge. What kind of company doyou run? I can’t bitch and moan, and the service was justtoo good. Seriously, though, thanks for so many years ofservice. This is why I always tell people to pass on theother loaders and go for the best: BIG BLUE. You will notbe disappointed.

Richard Magnani – Brockton, PAThanks Ralph, Bill and Richard, for your letters. We reallydo appreciate it when happy customers give us positivefeedback.

4

Michael J. Dillon - PublisherMark G. Pixler - Editor

[email protected] Kieft - Technical EditorContributors:Peter CarolineBrian Dillon, Ph.D.John Marshall

Robin TaylorDuane ThomasBarrett Tillman

All the electrical and/or electronic components of Dillon equipment and all Dillon textiles are covered by a one-year

warranty from date of purchase. Any modifications performed to Dillon machines, or the addition of any unapproved

equipment, including automated or mechanical add-ons fromother manufacturers, is expressly not recommended and

will void the Dillon warranty.

Issue #263May2014

Copyright 2014 byDillon PrecisionProducts, Inc.

What’s Inside:

THEBLUE PRESS

Product Index

Haley Dunn:The LionessReturns

Page 48

The KimberRimfireSuper

Page 78

1899: GrandpaDillon Pulls

The Lion’s TailPage 62

Dillon Precision Products Reloading Machines:BL 550, Pg. 13; Square Deal B, Pg. 8; RL 550B, Pg. 14;

XL 650, Pg. 20; SUPER 1050, Pg. 30; SL 900 Shotshell Loader,Pg. 38; and “Big Fifty Reloader, ” Pg. 50

RF 100 Automatic Primer Filler 3Vibratory Case Cleaners 18Case/Media Separators 18Dillon Progressive Reloading Dies 34-35Redding Reloading Dies 52Dillon Reloading Scales 86Reloading Components 42-43Books & Videos 82-83Ear & Eye Protection 12, 33Dillon Ammo Boxes & Bins 36Dillon Leather by Mitch Rosen 24-25Concealed Carry Tote/“Plan B” Day Planner 47Range Bag/Border Shift Ammo Bag/Pistol Cases 32Targets and Target Stands 54Firearms Maintenance 66-67Tools 53Shooting Accessories by Manufacturer:Arredondo Accessories 33, 39, 59Blade-Tech Industries Holsters, etc. 28California Competition Works 40, 56CED Chronograph/Timer 85Check-Mate Magazines 69, 70Chip McCormick Magazines 68C-More Sights 76Comp-Tac Holsters 28Dewey Cleaning Supplies 67Hogue Handgun Grips 60International Handgun Leather 27Lone Wolf Distributors 58MagPul AR-15 Magazines/Accessories 72-73Mec-Gar Pistol Magazines 70Mernickle Holsters 37ProMag Rifle Magazines 70Safariland Holsters 29, 57Streamlight Tactical Lights 60The Wilderness Tactical Products 26, 27Wilson Combat Magazines, Parts 68Wise Company Gourmet Freeze Dried Food 84

We READ Our Mail!

5

RL 550B

XL 650

Square Deal “B”

Which Dillon is Right for YOU?Which Dillon is Right for YOU?

Dillon’s XL 650resulted from

several years of listen-ing to our customersexpressing their fondestwishes. We took everygood idea we and ourcustomers ever had,tested them extensively,and then incorporatedthem all into the designof the XL 650.

See Page 20

Dillon’s Super1050 evolved

from the original RL1050, and features alengthened frame and anew crank assemblythat provides increasedfunctional stroke toaccommodate long riflecartridges, yet the handlestroke is at a minimum,meaning less work for theoperator. The Super 1050is warranted for life fromdefects in materials orworkmanship, plus a one-year, 100-percent warran-ty against normal wearand tear.

See Page 30

More RL 550s havebeen sold than any

other progressivemachine in the world,and for good reason: TheRL 550B’s versatility isalmost unlimited. It willload over 160 differentrifle and pistol calibers.

Its quick-change tool-head allows theuser to change

calibers without havingto readjust dies.

See Page 14

Dillon’s Square Deal “B”was designed to pro-

duce large amounts ofammunition in the leastpossible time for just a littlebit of money. At 300 to 400rounds per hour, you canproduce enough ammo forseveral pistol matches orpractice sessions in just afew hours.

See Page 8

Dillon’s “Commercial” Machine:Super1050

6

RL 550B With

AccessoryCasefeeder

BL 550

Which Dillon is Right for YOU?Which Dillon is Right for YOU?

Dillon’s “BFR”Big Fifty Reloader

Dillon’s RL 550B haslong worn the title

of “The World’s Most Ver-satile ProgressiveReloader,” and strip-ping it down to its

most basic form – Dil-lon’s BL (Basic Loader)550 – adds a whole newdimension of versatilityfor the shooter/hunter

who needs to feedseveral rifles.

See Page 13

Adding an automat-ic casefeed system

to your RL 550B willeasily increase yourammo production rateby 25 percent orMORE! The casefeederstreamlines the load-ing process by reduc-

ing hand move-ment, and theRL 550 Case-feeder uses

time-tested, proventechnology.

See Page 17

Dillon’s SL900 is the

new standard inshotshell reloading.The SL 900 featureseasily adjustable, case-activated powder andshot dispenser systemsthat eliminate trouble-some bushingchanges, along withspilled powder andshot.

See Page 38

SL 900Dillon’s

ShotshellLoader

You KNOW you wantone! There’s nothing

quite as thrilling as touch-ing off one of those .50BMG cartridges and send-ing 750 grains of cop-per-jacketed leaddownrange. WAYdownrange! If the costof loaded .50 BMGammo has been put-ting you off,you nolonger havean excuse.Join the ranks ofthe LONG-rangetarget shooters androll your own .50 BMG(and other long-range,specialty cartridges) onDillon’s BFR.

See Page 50

7

8

SQUARE DEAL ‘B’SQUARE DEAL ‘B’

“SDB” Stock Numbers.32 S&W Long/H&R Magnum*K75-16815 $409.95.380 ACP K75-20053.38 Special K75-20102.357 Magnum K75-20103.38 Super K75-20099.38 Super Comp K75-201159mm K75-20104.40 S&W K75-2078710mm K75-20643.41 Magnum K75-20054.44 Special K75-20105.44 Magnum K75-20052.44-40 Winchester K75-21036.45 ACP K75-20101.45 Colt K75-20051.45 GAP K75-20098.45 S&W Schofield K75-20418

Total price as pictured here with optional accessories below: $555.75

SDB Strong Mount K75-22223 $64.95Low Powder Sensor K75-16306 $41.95Aluminum Bullet Tray K75-22214 $41.95SDB Tool Holder with Wrench Set K75-19441 $26.95

STANDARD FEATURES:• Automatic Indexing• Available in 18 Handgun Calibers• Loading Rate: 400-500 Rds./Hr.• Comes With One Caliber Conversion• Automatic Powder Measure• Automatic Primer System• Comes Complete With Dies• Factory Adjusted, Ready-to-Use• Lifetime “No-B.S.” Warranty

All for ONLY...$37995*

SDB DVD Instruction ManualK75-19482 $19.95

L. ACCESSORY PKG DEALIncludes either Dillon’s D-Ter-minator Electronic Scale orEliminator Balance BeamScale, a Dial Caliper, a PrimerFlip Tray, a Bench Wrench, an8 oz. bottle of Case Lube, a

pair of clear safety glasses, a machine cover and thelatest edition of the Lyman Reloading Handbook (notpictured, see Page 62).SDB (Balance Beam Scale) K75-14482 $182.95SDB (Electronic Scale) K75-14483 $251.95

9

G. MACHINE COVERThis great looking nylon coveradds security to your loadingbench. Your reloader will be pro-tected against more than dust asthese covers come with a D-ringthat allows the heavy duty zipperto be locked.Machine Cover,K75-13795, $23.95 (H.) Master lock,K75-13083, $3.95

SQUARE DEAL ‘B’ ACCESSORIES

B. SQUARE DEAL ‘B’TOOLHEADExtra toolheads keepall your adjustmentsthe way you leftthem.K75-20113, $31.95

B.

I. LOW POWDER SENSORProvides an audible and visualreminder when it’s time to refillyour powder reservoir. When thepowder level drops to about 1000grains, a buzzer will sound and abright red LED will light.

K75-16306, $41.95

I.

J. MACHINE MAINTENANCE KITEverything you need tokeep your Dillon loadercleaned and lubricatedup to factory specifica-tions. Available in com-bination with a spare

parts kit for your machine. Maint. Kit/SDB Spare Parts Kit K75-97015, $35.95

C. SQUARE DEAL BENCH WRENCHThe Square DealBench Wrenchhas the correctsizes for SquareDeal “B” dieadjustments.K75-19970,$8.95 each. Buy

two or more, $8.10 each.

C.

J.

H.

G.

K. SDB SPARE PARTS KITDon’t risk downtimewaiting for a replace-ment part!

K75-20778, $21.95

A. SQUARE DEAL ‘B’ CONVERSION KITS Change from onecaliber to anotherin minutes. Con-version includescarbide size die(except .44-40),expander/ powderfunnel, seat die,crimp die,shellplate andlocator buttons. .32 S&W Long/H&R Mag. K75-16774 $95.95(.32 S&W Requires X-Small Powder Bar K75-20780 $29.95)

.380 ACP K75-20246 85.95

.38 Special K75-20240 85.95

.357 Magnum K75-20240 85.95

.38 Super K75-20229 85.95

.38 Super Comp K75-20275 85.959mm K75-20241 85.95.40 S&W K75-20469 85.9510mm K75-20469 85.95.41 Magnum K75-20247 85.95.44 Special K75-20242 85.95.44 Magnum K75-20242 85.95.44-40 Winchester K75-21035 85.95.45 ACP/.45 GAP K75-20123 85.95.45 Colt K75-20248 85.95.45 S&W Schofield K75-20417 85.95SQUARE DEAL ‘B’ QUICK CHANGE (Not Pictured) Toolhead and powder measure. K75-16378, $98.95‘SDB’ POWDER MEASURE K75-20001, $76.95

A.

800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com

D. CARTRIDGE CASE BIN & BRACKETErgonomicallydesigned to cut yourworkload througheconomy of motion!Attaches to all Strong-Mount-equippedSDBs.K75-11672, $24.95

E. PRIMER PICKUP TUBESUsed to transfer primersfrom flip tray to primingsystem.1 Lg. tube K75-22029 $7.991 Sm. tube K75-22028 7.992 Sm., 2 Lg. K75-20056 23.954 Lg. tubes K75-20050 23.954 Sm. tubes K75-20049 23.95

F. PRIMER FLIP TRAYA heavy, high-quality tray large enough for theFederal primer package. K75-13606, $20.95 each

E.

F.

D.

10

Reviewed by Peter CarolineSeveral weeks before the 2013 SHOT Show, I

received a press release from Lipsey’s, announc-ing a new Ruger handgun that would be exclu-sive to that Baton Rouge, LA, distributor. Thisnew arrival was a Bearcat revolver, entitled theShopkeeper, but it was unlike any previousBearcat on the market. It was all stainless steelconstruction, including the ejector rod housing,and featured a 3” barrel and a handsome set oflaminated wood birdshead grips. The fit and fin-ish were excellent. I’ll have to admit…it was justso damn cute, I had to have one to try out. So Icontacted Jason Cloessner at Lipsey’s, and he

told me they’d have one at the SHOT Show, so Icould get a close-up look.

The Bearcat Shopkeeper was, as promised, atthe Lipsey’s booth, and was certainly drawing itsshare of attention. I had to wait my turn to getmy hands on it. This is a very attractive little gun.The proportions and balance are just right. The3” barrel and birdshead grip go together verywell, and the gun seemed to fit my hand per-fectly. The ejector rod button is an unusual cres-cent shape, which enables it to slip over the basepin head so the ejector has sufficient travel topunch an empty casing out. The sights are typi-cal single-action-type sights, a 1/4”-high blade in

A NEW BREED OF CAT: Ruger Bearcat Shopkeeper .22 LR

DP

11

the front, and a square notch in the rear. I wasthinking, this could be a super little kit gun orsnake gun, small enough to stuff in a vest pocketor fanny pack, but just large enough to be easyto aim. At home, I keep an old Colt OfficersModel Match .22 around for packrats, but it’s fartoo large and weighty for hiking around. TheBearcat would be perfect.

About two weeks after I returned home fromthe SHOT Show, my sample Bearcat Shopkeeperwas delivered to my door. It came in a sturdygray plastic hard case that was obviously built fora larger revolver, and was accompanied by amassive Ruger-marked padlock, a Bearcat in-struction manual with Shopkeeper-specific insert,and a fired specimen cartridge, which somestates require for their own mysterious purposes.The gun itself measures 7-1/2” long, and weighsjust about 23 ounces.

My first trial of the Shopkeeper was out in thedesert, popping away at golf balls. I was usingCCI Blazer ammo, mainly because I have a largequantity, and it seems to work very well with justabout every .22 I’ve tried it in, rifle or pistol. Fromoffhand, the gun seemed to shoot consistentlylow, which is usually the case with a single actionwith fixed sights. The trigger pull is very crisp…it

measures about four pounds, but feels like less.Fired case extraction can be a bit touchy at times.At its rearmost position, the ejector rod protrudesabout 1/3” from the rear of the cylinder. A fired.22 LR case is a bit less than 2/3” long. As a re-sult, you have to give the ejector rod button afairly hard poke to the rear to expel the case fromthe chamber. Otherwise, you have to hook a fin-gernail over the case rim to pull it free.

When I did take the Shopkeeper to a realrange, I set up a sandbag on the bench and put atarget out at 15 yards. I was quite impressed withthe results. Five-shot groups varied from 7/8” to 1-1/4”, and for whatever reason, the gun didn’t seemto be shooting quite as low as it did when I wasfiring it offhand. In any case, the gun seemed quitecapable of minute-of-packrat accuracy.

The Ruger Bearcat Shopkeeper is one neat littlerevolver, and once you wrap your hand around it,you won’t want to let it go. The MSRP is $649(probably less in the real world), but that’s a realis-tic price for a carefully crafted stainless steel sin-gle-action with not one bit of plastic on it. If yourlocal dealer doesn’t have one in stock, he canorder it from Lipsey’s. Lipsey’s LLC • P.O. Box 83280 • Baton Rouge, LA

• 225-755-1333 • www.lipseys.com

A NEW BREED OF CAT: Ruger Bearcat Shopkeeper .22 LR

HP1 Electronic Hearing Protector• Protection Rating NRR 21• External battery compartment • Auto shut off extends battery life• Extra-deep, replaceable ear pads • Separate volume controls for each ear• TRUE stereophonic sound• Collapsible for ease of storage• One-year warranty on electronics

HP2Non-Electronic

Hearing Protector

Dillon Hearing ProtectorsHP1 (NRR 21) Electronic Hearing Protector, Blue K75-10157 $135.00HP1 Electronic Hearing Protector, Black K75-10156 135.00HP2 (NRR 21) Non-Electronic Hearing Protector, Blue K75-10361 19.95HP2 Hearing Protector, Black K75-10360 19.95HP1/HP2 Replacement Ear Cushions K75-19022 10.00Hearing Protector Belt Clip K75-13020 3.29

HearingProtectorBelt Clip

Dillon’s HP1 Electronic Hearing Protectoramplifies weak sounds while at the same

time blocking out loud, harmful noise. Dur-ing loud noises, the HP1 maintains a com-fortable level of sound transmission – HP1Hearing Protectors are designed to nevercompletely shut off. The Dillon HP2 FoldingHearing Protector is comfortable to wear forextended periods and folds for easy storagewhen not in use.

12

$25995

K75-15399Reloading Dies and Caliber Con-

versions sold separately (see the back of the order blankin the center of The Blue Press).

Pictured with optional accessories:Strong Mount K75-22051 $47.95

Dillon’s RL 550B has long worn the title of “TheWorld’s Most Versatile Progressive Reloader,” and

stripping it down to its most basic form – Dillon’s BL(Basic Loader) 550 – adds a whole new dimensionof versatility for the shooter/hunter who needs tofeed several rifles.

The BL 550 is essentially an RL 550B without theautomatic priming and powder systems. Capable ofloading over 160 calibers – just like the RL 550B – ituses any manufacturer’s standard 7/8” x 14 reloadingdies. It’s priced comparably with other manufacturers’turret presses; yet unlike them, it’s fully upgradeableto Dillon’s Progressive RL 550B loader!

The interchangeable toolhead (Page 15) makes itquick, easy and inexpensive to change calibers. Forexample, if you load .30-06 for elk, .243 for deer and.22-250 for coyotes, you don’t even have to changethe shellplate. You simply pull two pins and swap thetoolhead with your .30-06 dies to another toolheadwith your .22-250 or .243 dies in less than 30 sec-onds! The additional toolheads are $22.95 each, or$20.95 each if you buy three or more – if you load forseveral rifles it’s a no-brainer! Once you get your diesadjusted, you’ll never have to re-set them.

A powder measure adapter (bottom right photo) isavailable if you want to use a manual measure thatyou already own. Or, if you want to weigh everypowder charge you load, it’s easy – you can use apowder trickler with the powder die/funnel assemblythat comes with the BL 550.

BL 550Dillon’sBasic Loader

BL 550Dillon’sBasic Loader

POWDER MEASUREADAPTER

If you load rifle car-tridges with long-grainextruded powder, you cannow use any manufactur-er’s powder measure with7/8” x 14 threads on yourRL 450, AT 500, BL 550 orRL 550B. (Requires theuse of an RL 450 powderdie – see below.)

K75-20029, $22.95RL 450 Powder Die: K75-20308, $21.95

AUTO EJECT SYSTEMGreatly increases your

ammo production capabilitiesand adds a CartridgeChute/Bracket and a CartridgeBin to your reloader.

K75-22120, $30.95

PRIMER SYSTEM EARLY WARNING KITAllows you to focus on loading instead

of worrying about failing to seat a primer,and is an easy slip-on attachment to theauto prime system.

K75-20302, $25.95

AUTO PRIME SYSTEMIncludes:Primer Housing /ShieldPrimer Slides, Large/SmallPickup Tubes, Large/SmallPickup Tube Tips, Large/SmallMagazine Tubes, Large/SmallMag. Orifices, Large/SmallOperating RodPrimer Track BearingHousing ScrewsRet. Spring Retaining Pin

K75-16627, $82.95

AT 500 POWDER DIE

Extra powder dies allow you tomove your powder measure from tool-head to toolhead without changing the“belling” adjustment.

Powder Die: K75-16629, $19.95Oversize Die: K75-16626, $19.95Plastic Funnel: K75-16617, $5.95

Spares, Accessories & Upgrades for AT 500s, BL 550s & RL 550Bs

AUTO POWDER SYSTEM Accurate to within 0.1 grain,

our Automatic Powder Measure isworld renowned for its charge-to-charge consistency.

K75-20251, $87.95OPTIONAL MAGNUM RIFLE POWDER BAR

K75-21353, $29.95

13


14

STANDARD FEATURES:• Accommodates Over 160 Calibers• Uses Standard 7/8” x 14 Dies• Loading Rate: 500-600 Rds./Hr.• Comes With One Caliber Conversion• Interchangeable Toolhead Assembly• Automatic Powder Measure• Automatic Primer System• Lifetime “No-B.S.” Warranty


K75-14261Reloading dies sold separately.

*Prices vary on exotic-caliber machines.

Total Price as pictured here with optional accessories: $736.60

.45 ACP Die Set K75-14404 $63.95Strong Mount K75-22051 $48.95Alum. Roller Handle K75-17950 $45.95Low Powder Sensor K75-16306 $41.95Aluminum Bullet Tray K75-22214 $41.95RL 550 Toolholder with Wrench Set K75-11541 $28.95Cartridge Case Bin/Bracket K75-11185 $24.95

RL 550BRL 550BRL 550B DVD

Instruction ManualK75-19483 $19.95

I. PRIMER FLIP TRAYK75-13606, $20.95 each

J. PRIMER PICKUP TUBES1 Lg. tube K75-22029 $7.991 Sm. tube K75-22028 7.992 Sm., 2 Lg. K75-20056 23.954 Lg. tubes K75-20050 23.954 Sm. tubes K75-20049 23.95

A. RL 550B CALIBER CONVERSION KITS Contains:Shellplate, powderfunnel and locatorbuttons. Availablein all calibers;please specify cal-iber desired.K75-RL550B CON-

VERSION $45.95 (Exotic calibers, $55.95)

F. TOOLHEAD STANDSThe ultimate in conven-ience for keeping yourreloading bench clean anduncluttered.K75-22055, $20.95 eachThree or more, $18.95 ea.

B. AUTO POWDERMEASURE SYSTEMSAdditional powdermeasures stay on thetoolhead. Never changepowder measurementsagain!RL 550 Powder Measure K75-20782, $76.95 ea.Magnum Rifle Powder BarK75-21353, $29.95 eachX-Small Powder BarK75-20780, $29.95 each

C. DELUXE QUICKCHANGE ASSEMBLYWith a quick changeassembly and a caliberconversion kit (SOLDSEPARATELY), you can convert in less than aminute. Complete with:• Toolhead• Powder Measure• Powder Die• Toolhead StandPrice without Dies, K75-22058, $103.95Loading dies sold separately on Pages 34, 35 & 52.

E. TOOLHEADSDon’t adjust dies when switching calibers.These precision tool holders hold your dies inperfect alignment, making caliber changesquick and easy.

K75-13909, $22.95 each Three or more, $20.95 ea.

N. EQUIPMENT DUST COVERSThis packcloth nylon machine covercomes equipped with a D-ring, allow-ing the heavy duty zipper to be locked.RL 550B Cover, K75-13795, $23.95(O.) Master lock, K75-13083, $3.95Quick-Change Cover (for use with powder measure)K75-11143, $14.95

A.

B.

C.

F.

J.

I.

N.

O.

G. 1” BENCH WRENCHK75-10842, $7.95 eachTwo or more, $7.10 ea.

G.

D. POWDER DIESExtra powder dies allow you tomove your powder measurefrom toolhead to toolheadwithout changing the “belling”adjustment.

K75-20064, $11.35 eachThree or more, $10.25 ea.X-Large Powder Die, K75-21253, $19.95 each

E.

D.

L. MACHINE MAINTENANCE KITProvides you with everythingyou need to keep your Dil-lon loader cleaned and lubri-cated up to factory specifica-tions. Available in combina-tion with a spare parts kit foryour machine.

Maint. Kit & RL 550B Spare Parts Kit K75-97016, $32.95

M. LOW POWDER SENSORProvides an audible and visualreminder when it’s time to refillyour powder reservoir. When thepowder level drops to about 1000grains, a buzzer will sound and abright red LED will light.

K75-16306, $41.95

M.

K. 550 SPARE PARTS KIT1 Seating Punch, Small1 #10 Tinnerman Insert1 Primer Cup, Large1 Primer Cup, Small1 Bellcrank Cube1 3/8” Index Ball1 550 Brass Tip Set Screw1 550 Ejector Wire1 Cartridge Retaining Spring1 550 Slide Return Spring4 Locator Pins (#1, #2, #3, #4)1 Seating Punch, Large1 550 Index Ball Spring2 Pickup Tube, Small, Yellow Tips2 Magazine Orifices, Large1 Toolhead Pin

2 Pickup Tube, Large, Green Tips2 Magazine Orifices, Small1 550 Primer Cup Spring2 Retaining Clips2 Dispensing Tip, Large 2 Dispensing Tip, Small1 Failsafe Bushing Rev. B

K75-20048, $18.95

K.

RL 550B ACCESSORIES

P. UNIVERSAL MOUNTING HARDWARE KITIncludes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4Flat Washers, 4-Fender Washers, 2-Wood Screws.

K75-14355, $5.49

H. RL 550B CASEFEEDER UPGRADEAvailable for most pistol cartridges –will not work with rifle cartridges. Large Pistol K75-14450Small Pistol K75-14451

$254.95 (110v US Model)Large Pistol K75-14453Small Pistol K75-14454

$264.95 (220v Euro Model)CASEFEEDER CALIBER CONVER-SIONS (Page 17)

$23.95 eachH.

15



16

Dillon’s Toolholders are avail-able for your RL 550B, XL

650, SL 900, and Square Deal B,and ensure that the tools you needto service your reloader are handyand organized. No more diggingaround your bench trying to findthe right size hex wrench!

RL 550 with Wrench Set K75-11541 $28.95

RL 550 w/o Wrench Set K75-11543 $17.95

Casefeed 550, with Wrench Set K75-11540 $28.95

Casefeed 550, w/o Wrench Set K75-11542 $17.95

Includes: either Dillon’s D-Termi-nator Electronic Scale or Elimina-

tor Balance Beam Scale, a DialCaliper, a Primer Flip Tray, a BenchWrench, an 8 oz. bottle of CaseLube, a pair of clear safety glasses,a machine cover and the latest edi-tion of the Lyman Reloading Hand-book (not pictured, see Page 82).

RL 550B (Balance Beam Scale)K75-21143 $181.95

RL 550B (Electronic Scale)K75-22117 $250.95

Increase thestability of

your reload-ing benchwith Dillon’snew StrongMounts. Theseheavy gaugesteel StrongMounts increase the machine’s “foot-print” to over 10”, spreading the loadover the whole bench instead of stress-ing the leading edge.

Strong Mounts raise your machine6” to 8”, providing a comfortable workheight for people who prefer to standwhile reloading. For some XL 650 own-ers, overhead clearance can become aproblem, so we designed a mount espe-cially for this application. The XL 650-only mount raises the machine 6” abovethe bench top.

All mounts come with all the fasten-ers necessary to mount your machine(550/650 mount includes RL 550B binbracket) and are coated with a durableblack wrinkle finish.

Dillon’soriginal

RL 1000 cameequipped witha simple, shal-low alu-minum bullettray that wasdesigned for economy of motion whenloading. For years, our attempts toduplicate the efficiency and the “feel” ofthat tray in other machine applicationswere less than satisfactory. It took thedevelopment of the Strong Mount forthe RL 550 and the XL 650 to enable usto place the redesigned tray exactlywhere it needed to be.

Our aluminum tray works on theSquare Deal ‘B’, the RL 550B and XL650 when equipped with the RL 550/XL650 Strong Mount, and a separate kit isavailable for the RL 1050. Comes with aDillon Blue powder coat finish.

Dillon’s accesso-ry handle gives

your reloader anentirely new “feel.”A roller handlereduces operatorfatigue during longreloading sessionsand makes primerseating easier.

Alum. Roller K75-17950 $45.95Plastic Roller K75-22183 40.95

Bullet Tray Kit K75-22214 $41.95RL 1050 Tray Kit K75-22215 41.95

Dillon’s newLow Powder

Sensor provides anaudible and visualreminder when it’stime to refill yourpowder reservoir.When the powderlevel drops toabout 1,000 grainsremaining in thereservoir, a buzzerwill sound and abright red LEDwill light. Thissimple, but effec-tive, device is designed to fit all Dillonpowder measures. Made of clear poly-carbonate, it simply replaces the die-cast metal lid supplied with the meas-ure, and operates on two AAA batteries(included).

K75-16306 $41.95

RL 450-to-RL550BUpgrade Parts

Roller Handle

Quick-Change Cover for use with pow-der measure. K75-11143 $14.95

You can, either all at once or oneassembly at a time, upgrade your RL

450 reloader to an RL 550B!RL 450 Upgrade ComponentsFrame Change Kit K75-20094 $94.95Powder Measure /Failsafe K75-20251 87.95Auto Prime Syst. K75-20055 85.95Auto Eject Syst. K75-20002 59.95Primer Early Warning Syst.K75-20302 25.95

Bullet Tray Kits

DillonTool-

holders

BeltedMagnumPowderSystemAccessory

Package Deal

Low PowderSensor

Quick-ChangeDust Cover

RL550/XL650 K75-22051 $48.95

Magnum rifle cartridges can re-quire from 70 grains to well in

excess of 100 grains for a singlecharge. Our “Belted Magnum” Pow-der System features a maximum-ca-pacity steel powder bar that candispense more than 100 grains of ex-truded IMR powder. We tested thissystem with various extruded riflepowders and found that powdercharge variations stayed within plus-or-minus three-tenths of a grain.

Magnum Powder SystemK75-97126 $142.95

Strong Mounts

$25495*

110 Volt US ModelLarge Pistol K75-14450Small Pistol K75-14451220 Volt Euro Model, $264.95 Large Pistol K75-14453Small Pistol K75-14454

*Caliber Conversions sold separately.

Caliber Conversions

for the RL 550B Casefeeder

$23.95 Each.25-20/.32-20 Winchester K75-14206.30 Mauser/7.62x25 K75-14204.32 S&W Long K75-14205.32 H&R Magnum K75-142839mm/9x21/.38 Super/.30 Luger K75-1428410mm/9x25 Dillon K75-14285.38 S&W K75-14208.38 Super Comp. K75-14287.38/.357 Magnum K75-14286.357 SIG/.40 S&W K75-14289.38-40/.44-40 Winchester K75-14288.41 Magnum K75-14290.44 Russian K75-14209.44 Special/.44 Magnum/.44 Colt K75-14291.45 GAP K75-11441.45 ACP/.40 Super/.400 Cor-Bon K75-14292.45 Auto Rim K75-19140.45 Colt/.45 S&W/.454 Casull K75-14279.45 Winchester Magnum K75-14210

A CasefeederUPGRADEfor YOURRL 550B

A CasefeederUPGRADEfor YOURRL 550B

.223 RemingtonK75-13254$26.95

.308 WinchesterK75-12867$27.95

.30-06 SpringfieldK75-12679$28.95

.380 ACPK75-15160 $15.45

9mm ParabellumK75-15161 $15.45

.38 SuperK75-15158 $15.45

.38 Special K75-15159 $15.45

.357 Magnum K75-15163 $15.45

.40 S&WK75-15164 $15.45

10mmK75-15162 $15.45

.44 MagnumK75-15165 $15.45

.45 ACPK75-15166 $15.45

Dillon’sStainless Steel Case Gages

17

.45 ColtK75-15167$15.45

.45 GAPK75-12672$15.45

Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included

CV-2001 – The Industry Standard Dillon’s CV-2001 Vibratory Case Cleaner is the

largest in the industry. Its 12-1/2 quart bowl capacitywill allow you to polish up to 1,300 .38/.357 or 550.30-06 cases per hour.

Not only is our capacity greater, but our motor islarger in horsepower, internally cooled, thermallyprotected, and turns on precision ball bearings. Thisis no “hobby” machine!

The bowl and base are constructed of7/32” thick injection molded high-strengthpolypropylene which is impact and abra-sion resistant.

Case/Media SeparatorsAfter we sold thousands of our famous

first generation FL-2000 case cleaners, cus-tomers who had purchased them beganasking us to address the problem of sepa-rating the cleaned and polished brass fromthe cleaning media.

We knew from the beginning that thesimplest method of separating would be arotating squirrel cage, but we had to find adesign we could manufacture economical-ly. Our problem was that it had to be BIG –big enough to handle the entire load of theFL-2000 series case cleaners.

The solution was an injection moldedreversible part. Simple, and it works great.

Our device is large,10” x 14”, and will hold morethan 1,600 .38 Special cases. Itsits on a large media collectiontub that measures 18” x 22”.The tub keeps the mess off thefloor and bench.

It’s fast – so fast it willremove media from 1500rounds of .223 brass in a matterof seconds.

Limited Work Space?Dillon’s introducing the new CV-750 heavy duty

Vibratory Case Cleaner for those with limited space.This new case cleaner uses the same motor as theCV-2001 and is every bit as tough – just more com-pact. To accompany the CV-750, the CM-500 doesthe same job as the larger CM-2000 Case/Media Sep-arator; and, like the CV-750, handles just about halfthe capacity of the larger unit.

Although scaled down in size, these two pieces ofequipment are every bit as tough as their full-sizedcounterparts. We used the same materials in theirconstruction and designed them to work just as hard– and do it in a more compact area!

Attention European Customers:Case Cleaners are available in 220 volt!Euro CV-2001 K75-22047 $213.95Euro CV-750 K75-19473 $169.95

CM-2000 Case/Media Separator K75-20675 $73.95CM-500 Case/Media Separator K75-21045 $46.95

Dillon’s Case Preparation EquipmentDillon’s Case Preparation Equipment

CV-2001K75-20493

$188.95

All Dillon CV-2001 and CV-750 Vibratory Case Cleaners have a One-Year Warranty on the electric motor.

CV-750 K75-19455 $144.95

18

19Rapid Polish 290

SHINE? You bet your brass!Dillon Precision has devel-oped another exciting newproduct to make your reload-ing faster and easier. RapidPolish 290 is the first cartridgecase finish designed specifi-cally to bring a brilliant shine(20 percent brighter than tum-bling media alone) and a pro-tective coating to reloaded

ammunition. Simply add several capfuls to themedia in your tumbler and run. Rapid Polish 290has a great residual value and stays in your tum-bling media. You’ll use less each time you cleanyour cases.Rapid Polish 290 contains no ammonia, so it

won’t weaken brass cases!Rapid Polish 290

8 oz. bottle. K75-13804 $8.95Case (20 pc.) K75-20255 135.95

DillonCaseLube

Rapid Lube 5000, Dillon’saerosol cartridge case lubri-cant, has been replaced byan “environmentally cor-rect,” non-aerosol case lube.It works the same: Simply layyour cases out, spray lightlywith one or two passes andyou’ve done it. No mess, noguesswork. Within minutesthe lubricant distributesitself around the cartridge

cases and you’re ready to load. Try a bottle.You’ll never use a grease pad again.

D.C.L. Dillon Case Lubricant8 oz. bottle K75-13733 $8.95Case (20 pc.) K75-20256 135.95

Half and Half 10 bottles of polish /10 of lubeCase (20 pc.) K75-21375 $135.95

Crushed walnut hull polishing media –quickly cleans even the dirtiest of cases. 15-pound bag K75-13287 $23.95

Ground corn cob polishing media – the best there is for that final polish.

10-pound bag K75-13496 $15.95

Don’t Forget Polishing Media!

DP

This month’s cover model isRio. To see more photos of Rio

and other Blue Press covermodels, you can “follow” uson Instagram@bluepress onyour smart phone, or go to

www.instagram.com/bluepressand click “follow.”

20

STANDARD FEATURES:• Automatic Indexing• Uses Standard 7/8” x 14 Dies• Loading Rate: 800-1000 Rds./Hr.• Comes With One Caliber Conversion• 5-Station Interchangeable Toolhead• Automatic Powder Measure• Automatic Primer System• Lifetime “No-B.S.” Warranty


K75-650Reloading dies sold separately.

*Prices vary on exotic-caliber machines.

XL650XL650

Total price as pictured here with optional accessories: $1127.55

Electric Casefeeder K75-210** $218.95Powdercheck System K75-21044 $68.95.45 ACP Die Set K75-14404 $63.95Strong Mount (550/650) K75-22051 $48.95Aluminum Roller Handle K75-17950 $45.95Low Powder Sensor K75-16306 $41.95Aluminum Bullet Tray K75-22214 $41.95XL 650 Toolholder with Wrench Set K75-11555 $29.95

XL 650 DVD Instruction ManualK75-19484 $19.95

21

B. POWDER MEASUREK75-20782, $76.95 eachMagnum Rifle Powder BarK75-21353, $29.95 each

X-Small Powder Bar K75-20780, $29.95 each

C. POWDER CHECK K75-21044, $68.95 each Three or more, $61.95 ea.D. QUICK CHANGEToolhead, TH Stand and Pow-der Measure

K75-22059, $107.95

H. TOOLHEADSK75-13863, $27.95 eachThree or more, $25.95 ea.I. POWDER DIESExtra powder dies allow you tomove your powder measure fromtoolhead to toolhead withoutchanging the “belling” adjustment.

K75-20064, $11.35 each, three or more, $10.25 ea.X-Large Powder Dies, K75-21253, $19.95 each

K. CASEFEED ASSEMBLYSpecify large pistol, small pis-tol, large rifle or small rifle.

$218.95 (110v), $228.95 (Euro. 220v)

L. EXTRACASEFEED PLATES$38.95/49.95

G. TOOLHEAD STANDSThe ultimate in conveniencefor keeping your reloadingbench clean and uncluttered.

K75-22055, $20.95 eachThree or more, $18.95 ea.

DON’T FORGET ONE OF THESE!Universal Mounting Hardware Kit K75-14355 $5.491” Bench Wrench K75-10842 7.95

Buy two or more Bench Wrenches for $7.10 each

J. XL 650 PRIMING SYSTEM (Not Pictured)Small Priming System K75-21065 $80.95Large Priming System K75-20982 80.95

E. PRIMER PICKUP TUBESUsed to transfer primersfrom flip tray to primingsystem.1 Lg. tube K75-22029 $7.991 Sm. tube K75-22028 7.992 Sm., 2 Lg. K75-20056 23.954 Lg. tubes K75-20050 23.954 Sm. tubes K75-20049 23.95

F. PRIMER FLIP TRAYA heavy, high-quality tray large enough for theFederal primer package.

K75-13606, $20.95 each

G.

O.

XL 650 Casefeed Assembly Large pistol (110v) K75-21080 (Euro. 220v) K75-97025Large rifle (110v) K75-21081 (Euro. 220v) K75-97022Small pistol (110v) K75-21079 (Euro. 220v) K75-97021Small rifle (110v) K75-21082 (Euro. 220v) K75-97023XL 650 Casefeed Plate Large pistol K75-21072 $38.95Large rifle K75-21075 38.95Magnum rifle K75-18492 49.95Small rifle K75-21074 38.95Small pistol K75-21073 38.95

I.

H.

L.

E.

F.

B.

D.

C.

A. XL 650 CALIBERCONVERSION KITSInclude shellplate,locator buttons, pow-der funnel and case-feed adapter parts.Available in most cal-ibers; please specifycaliber desired.

(You MAY need a different casefeed plate, see item L.)K75-XL650 CONVERSION (Specify Caliber) $77.95*

*(All belted magnums and exotic calibers, $87.95 ea.)

A.

XL 650 Accessories

N. SPARE PARTS KITDon’t risk downtimewaiting for a replace-ment part!1 Priming Station Locator Tab1 650 Ejector Wire1 Slide Spring Pin1 Indexer Spring1 650 Primer Indexing Arm1 650 Index Pawl1 650 Primer Cam1 650 Ring Indexer2 Pistol Decapping Pins1 650 Index Spring Revision A1 #10 Tinnerman Insert1 Index Arm Bowed Washer1 Short Lever Spring1 Bellcrank Cube1 3/8” Index Ball1 Powder Bar Spacer Plug1 650 Brass Tip Set Screw4 Locator Pins (#1, #2, #3, #4)1 5/16” Index Ball1 Tab/Spring Arm Spring1 Case Insert Slide Spring1 650 Pawl Spring

1 Indexing Arm Spring1 Index Ball Spring2 Pickup Tube, Small, Yellow Tips1 650 Tool Head Pin2 Pickup Tube, Large, Green Tips1 Primer Cup Spring2 Retaining Clips2 650 Shellplate Cap1 650 Primer Support Shim1 Case Insert Slide Spring Cap1 Priming Station Locator TabBushing2 Dispensing Tips, Large2 Dispensing Tips, Small1 Failsafe Bushing Revision B

K75-21146, $25.95

Q. LOW POWDER SENSORProvides an audible and visualreminder when it’s time to refill yourpowder reservoir.

K75-16306, $41.95

Q.

M. MACHINE MAINTENANCE KITEverything you need tokeep your Dillon loadercleaned and lubricated upto factory specifications.Available in combinationwith a spare parts kit foryour machine.

Maint. Kit & XL 650 Spare Parts Kit K75-97017, $39.95

O. EQUIPMENT DUST COVERSThis packcloth nylon machine covercomes equipped with a D-ring, allowingthe heavy-duty zipper to be locked.XL 650 Cover, K75-10443, $39.95(P.) Master lock, K75-13083, $3.95Quick-Change Cover (for use withpowder measure) K75-11143, $14.95

P.


Quit worrying about squib loadsand double-charged cases.


2222


Dillon’s Toolholders are avail-able for your RL 550B, XL

650, SL 900, and Square Deal B,and ensure that the tools you needto service your reloader are handyand organized. No more diggingaround your bench trying to findthe right size hex wrench!

XL 650/SL 900 with Wrench Set K75-11555 $29.95

XL 650/SL 900 w/o Wrench Set K75-11554 $18.95

Dipped Ball-End Hex Wrenches K75-11483 $17.95

One-Inch Bench Wrench K75-10842 $7.95

Includes: either Dillon’s D-Termi-nator Electronic Scale or Elimina-

tor Balance Beam Scale, a DialCaliper, a Primer Flip Tray, a BenchWrench, an 8 oz. bottle of CaseLube, a pair of clear safety glasses,a machine cover and the latest edi-tion of the Lyman Reloading Hand-book (not pictured, see Page 82).

XL 650 (Balance Beam Scale) K75-21430 $197.95

XL 650 (Electronic Scale) K75-22118 $266.95

Increase thestability of

your reloadingbench withDillon’s newStrongMounts. Theseheavy gaugesteel StrongMounts increase the machine’s “foot-print” to over 10”, spreading the loadover the whole bench instead of stress-ing the leading edge.

Strong Mounts raise your machine6” to 8”, providing a comfortable workheight for people who prefer to standwhile reloading. For some XL 650 own-ers, overhead clearance can become aproblem, so we designed a mount espe-cially for this application. The XL 650-only mount raises the machine 6” abovethe bench top.

All mounts come with all the fasten-ers necessary to mount your machine(550/650 mount includes RL 550B binbracket) and are coated with a durableblack wrinkle finish.

Dillon’soriginal

RL 1000 cameequipped witha simple, shal-low alu-minum bullettray that wasdesigned for economy of motion whenloading. For years, our attempts toduplicate the efficiency and the “feel” ofthat tray in other machine applicationswere less than satisfactory. It took thedevelopment of the Strong Mount forthe RL 550 and the XL 650 to enable usto place the redesigned tray exactlywhere it needed to be.

Our aluminum tray works on theSquare Deal ‘B’, the RL 550B and XL650 when equipped with the RL 550/XL650 Strong Mount, and a separate kit isavailable for the RL 1050. Comes with aDillon Blue powder coat finish.

Dillon’s accesso-ry handle gives

your reloader anentirely new “feel.”A roller handlereduces operatorfatigue during longreloading sessionsand makes primerseating easier.

Alum. Roller K75-17950 $45.95Plastic Roller K75-22183 40.95

Bullet Tray Kit K75-22214 $41.95RL 1050 Tray Kit K75-22215 41.95

Dillon’s newLow Powder

Sensor provides anaudible and visualreminder when it’stime to refill yourpowder reservoir.When the powderlevel drops toabout 1,000 grainsremaining in thereservoir, a buzzerwill sound and abright red LEDwill light. Thissimple, but effec-tive, device is designed to fit all Dillonpowder measures. Made of clear poly-carbonate, it simply replaces the die-cast metal lid supplied with the meas-ure, and operates on two AAA batteries(included).

K75-16306 $41.95

Roller Handle

Quick-Change Cover for use with pow-der measure. K75-11143 $14.95

Bullet Tray Kits

DillonTool-

holders

BeltedMagnumPowderSystemAccessory

Package Deal

Low PowderSensor

Quick-ChangeDust Cover

RL550/XL650 K75-22051 $48.95XL650-only K75-22052 45.95

Magnum rifle cartridges can re-quire from 70 grains to well in

excess of 100 grains for a singlecharge. Our “Belted Magnum” Pow-der System features a maximum-ca-pacity steel powder bar that candispense more than 100 grains of ex-truded IMR powder. We tested thissystem with various extruded riflepowders and found that powdercharge variations stayed within plus-or-minus three-tenths of a grain.

Magnum Powder SystemK75-97126 $142.95

Strong Mounts

Powder CheckSystem

23

The RT 1200B is used justlike a standard size die. The bigdifference is that while you arepushing the case into the die tosize it, a 1/4 horsepower electricmotor driving a carbide cutter istrimming the case to length.Chips are drawn off through avacuum manifold that clamps tothe outside of the specialsize/trim die. (Vacuum cleanerand hose not included.) The RT1200B is equipped with a quick-

disconnect power cord; and itcan be used on any standardreloader, single stage or progres-sive.

The RT 1200B trimmer motorK75-22080 is $267.95. (Avail-able only in 110 volt 60 hz.)Size/trim dies are sold separate-ly (Please see chart below).Replacement carbide cuttingblades, K75-13141, are $19.95each. Upper lock rings, K75-13559, are $4.99 each.

.204 Ruger K75-21028 $58.95

.222 Rem. K75-21363 58.95

.223 Rem. K75-20107 50.95

.220 Swift K75-21364 58.95

.22-250 Rem. K75-20110 55.95

.243 Win. K75-20109 55.95

.25-06 Rem. K75-21367 58.956.5 x 55mm K75-21495 58.95.270 Win. K75-20112 55.957mm Rem. Mag. K75-21366 58.95.30-30 Win. K75-20111 55.95.300 WSM K75-21029 58.95.308 Win. K75-20106 50.95

.30-06 K75-20108 $50.95

.300 Win. Mag. K75-21370 58.95

.300 Wby. Mag. K75-21371 58.95

.303 Brit. K75-21765 58.958 x 57 Mauser K75-21502 58.95.338 Win. Mag. K75-21368 58.95NOTE: The trimmer motor for the 7.62 x39 and 6.8 SPC cartridges is not compati-ble with other size/trim dies. Trimmer Motor K75-22024 $272.956.8 SPC (trim die) K75-16391 58.957.62 x 39 (die) K75-16390 58.95

Dillon’s Rapid Trim 1200B Case TrimmerMakes short work out of trimming large quantities of rifle brassDillon’s RT 1200Bshowninstalledon an AT 500.

RT 1200B Size/Trim Die Calibers

MILITARYBRASS?

Eliminate the “Grunt Work” with Dillon’s Super Swage 600

Until now, reusing military brass, with its crimpedprimer pockets, has been a tedious task. The Dillon

solution is a remarkably simple device that bolts to yourbench and allows you to swage the primer pockets withspeed and ease. The case is supported from the inside, soyou won’t be tearing the rims off the brass. A toolsteel, hardened swage rod (easy to change fromlarge to small primers) simply rolls the crimpaway. No reaming is necessary. Our uniquecompound cam leverage system assuresnot only ease of operation,but perfect alignmentwith each and everyround. Sound simple?It is and it works.What’s more, it’s inex-pensive. The SuperSwage 600 comes com-plete with large and smallswage rods.

K75-20095$100.95

5JR-DL $75Afull-length belt slide that offers all-day comfort

and superior concealment for an outside-the-pants belt holster.Beretta 92 K75-18817 Colt Government Model K75-18810Colt Commander K75-18811Colt Officers K75-18812 GLOCK 17, 22, 31 K75-18813

GLOCK 19, 23, 32 K75-18814 GLOCK 26, 27, 33 K75-18815GLOCK 20, 21 K75-18816Makarov K75-18819 SIG P220, P226 K75-18818 SIG P228, P229 K75-18827S&W Military & Police 9mm/.40 Auto K75-19011S&W Military & Police .45 Auto K75-19012S&W Military & Police SHIELD™ K75-12241S&W 2” J-Frame Revolver K75-18820Springfield Armory XD 4” K75-18825Springfield Armory XD 5” K75-18874Springfield Armory XD-S K75-12236Ruger 2.25” SP-101 Revolver K75-18828


24Dillon Leather by Mitch Rosen!Dillon Leather by Mitch Rosen!

MBS-DL $50Single mag pouch with snap-

on/snap-off belt loop.1911 K75-18847Beretta K75-18848 GLOCK 17, 22, etc. K75-18849 GLOCK 20, 21, etc. K75-18850

5DM-DL $50Double mag pouch with two

belt loops.1911 K75-18851Beretta K75-18852GLOCK 17, 22, etc. K75-18853 GLOCK 20, 21, etc. K75-18854

SOS-DL $55One magazine, one tactical

light (fits 6P-size lights).1911 K75-18855Beretta K75-18856GLOCK 17, 22, etc. K75-18857 GLOCK 20, 21, etc. K75-18858

When we lost our supplier for Dillon Leather, we considered

abandoning the gunleather business. Fortunately, we were

able to team up with Mitch RosenExtraordinary Gunleather to

continue to offer a best-quality,made-in-the-USA line of belts and

holsters. We know you’ll like theseproducts – we’re happy to have

our name on them.

Clipper-DL $65Our clip-on, inside-the-waistband holster features

a steel reinforced mouth and a high-qualityspring-steel clip.Colt Commander K75-18833Colt Officers K75-18834 GLOCK 17, 22, 31 K75-18829 GLOCK 19, 23, 32 K75-18830 GLOCK 26, 27, 33 K75-18831S&W Military & Police 9mm/.40 Compact K75-19013

El Raton-DL $50This pocket holster secures and properly positions

a J-Frame revolver in your pocket. Will not comeout when you draw.2” J-Frame S&W Revolver K75-18843

25


1.5” Gun Belt32” Waist K75-1885934” Waist K75-1886036” Waist K75-1886138” Waist K75-1886240” Waist K75-1886342” Waist K75-1886444” Waist K75-18865

1.25” Gun Belt32” Waist K75-1887334” Waist K75-1886736” Waist K75-1886838” Waist K75-1886940” Waist K75-1887042” Waist K75-1887144” Waist K75-18872

Dillon Leather by Mitch Rosen!Dillon Leather by Mitch Rosen!

Best-Quality Belt-DL $70Simply the best GUN BELT you have ever owned. Full, dou-

ble-thickness leather with solid brass buckle and hardware.

Sport EXP-DL $98The Sport™ holster is a straight-drop design featur-

ing a tunnel loop and rear stabilizing slot. This isan all-around holster suited to field use, "practical"competition, and some prefer it for daily carry. Slimprofile, straight drop, close to the body.S&W 4” K-Frame Revolver K75-19372S&W 4” Lugged Barrel L-Frame Revolver K75-19373 S&W 4” Light Barrel N-Frame Revolver K75-19374 S&W 4” Lugged Barrel N-Frame Revolver K75-19375 S&W 5” Lugged Barrel N-Frame Revolver K75-19376

THE WILDERNESS’ SAFEPACKER™ HOLSTER is the ONLY mode ofconcealed carry that I have personally witnessed save a man’s life.

It’s a long story, but suffice it to say that the element of surprise afford-ed by the Safepacker did the trick. The folks at The Wilderness con-tend that the Safepacker™ is the best, most versatile and utilitarianholster in the world. I tend to agree, because the one you see picturedat left…is mine. Mark Pixler, editor

The Safepacker can be hand carried like a day planner, equippedwith a shoulder strap (not included), slipped into an attaché case,opened with the top flap stuffed between the mattress and box springson your bed, strapped to a seatbelt, attached to a sun visor, clipped to abackpack, or worn on your hip as a very low-profile “un-holster.” “Government Model” Safepacker, RH K75-11703 $89.95“Government Model” Fits: Colt Government Model, GLOCK 17/18/20/21/22, SIG

P-220/226, Beretta 92/96, HK USP-45, 4” K-Frame, 3” N-Frame, etc.“Commander” Safepacker, RH K75-11702 89.95“Commander” Fits: Colt Commander, SIG P-245/229, HK USP-45 Compact, Tokarev, etc. “Officers’ Model” Safepacker, RH K75-11701 89.95“Officers Model” Fits: Colt Officers’ Model, GLOCK 19/23/30/32/36, Para P-12, etc.

“GLOCK 26/27” Safepacker, RH K75-11700 89.95“GLOCK 26/27” Fits: G 26/27, Springfield XD Subcompact, Makarov, etc.

“J-Frame” Safepacker, RH K75-11699 89.95“J-Frame” Fits: S&W Centennial, Taurus M85, Walther PPK, KelTec P-11, etc.

“Mustang” Safepacker, RH K75-11698 89.95“Mustang” Fits: Colt Mustang, Pony, KelTec P-32, Beretta Tomcat, etc.

The Safepacker

Small Pistol Sheath K75-13351 $28.50 Small Revolver K75-13375 $28.50 Large Pistol Sheath K75-13358 $28.50

Center of Mass LLC’s Pistol Sheath is anadjustable, ambidextrous, multi-fit

KYDEX® holster that is durable, affordableand Made in Idaho!

The Small Pistol Sheath will hold all1911s; Browning Hi Power; Buckmark 22.;all Kahrs; Walther P-22, PP, PPK; Kel-Tec P-

11, PF9; Ruger LC9; Taurus Slim 9,.40;CZ75s and Witness.

The Small Revolver Pistol Sheath fits allJ-Frame-Size revolvers, including the newS&W Bodyguard, Ruger SP101 and LCR.

The Large Pistol Sheath will hold allSpringfield XDs; GLOCKs (excluding the

G21 w/Picatinny rail); S&W M&Ps, SDs, Sig-mas, P99s; FNs; Walther PPS, P99; HiPoints; Taurus Millenium, Pro, 24/7, 809,840, 845; HK USP Compacts, P30, P30Long, 45 Long, P2000/2000SK; SIG Polymerframe pistols; Ruger SR9, SR40, SR9C,SR40C, P345, P95; and many others.

The Maverick “Tuckaway”Holster allows you to wear

your handgun inside yourpants and under your shirt,with only a small portion ofthe belt clip visible. An afford-able alternative holster fordeep-cover carry. Sm. Rev. K75-18553 $19.95Sm. Auto K75-18554 19.95Med. Auto K75-18555 19.95Lg. Auto K75-18556 19.95

The Maverick “Inside ClipOn” Holster is a high-qual-

ity, affordable inside-the-waist-band holster with a sturdy beltclip. The nylon web sightchannel means that the holsterwill retain its shape for easierreholstering. Sm. Rev. K75-18549 $19.95Sm. Auto K75-18550 19.95Med. Auto K75-18551 19.95Lg. Auto K75-18552 19.95

Maverick Holsters, imported from South Africa exclusively by GUNFIGHTERS Ltd.

26

The Pistol Sheath by Center of Mass LLC

TheWilderness’ OriginalInstructor Belt is an incredibly strong belt with a speciallydesigned “V” ring buckle. Imitation is the sincerest formof flattery, and the marketplace is full of copies of thisbelt, but none can compare to the original.

We’re selling the five-stitch version, which has extrastitch lines to make the belt more rigid vertically in

order to better support holsters, magazine pouches andother gear. This belt is a favorite with law enforcement,military personnel, firefighters, paramedics, etc. Note:The 1.75” belt works best with BDUs or jeans. The 1.5“belt features a scaled-down buckle.Measured Waist 1.5” Belt 1.75” Belt 32” Waist K75-10965 K75-10253 $39.9534” Waist K75-10966 K75-10128 39.9536” Waist K75-10967 K75-10129 39.9538” Waist K75-10968 K75-10130 39.9540” Waist K75-10969 K75-10131 39.9542” Waist K75-10970 K75-10132 39.9544” Waist K75-10971 K75-10133 44.9546” Waist K75-10972 K75-10889 44.95

IHL Ltd. Class Holster $92.95Colt Gov’t, Black K75-16456Colt Gov’t, Brown K75-14348Colt Com, Black K75-16886Colt Ofcr’s, Black K75-16887GLOCK 17, Black K75-16891GLOCK 19, Black K75-16890

IHL Prosecutor Holster $87.95Ruger Alaskan (Pictured) K75-15038S&W Governor .410/.45, 2.75” bbl. K75-15041S&W .500 Mag., 4” bbl. K75-15039Taurus Judge 2.5”.410, 2” bbl. K75-15040

IHL Solo Mag Pouch $38.95Single Stack, Black K75-16446Single Stack, Brown K75-13145Double Stack, Blk. K75-16447

IHL Belt Slide $49.95Colt Gov’t, Black K75-16468Sm. GLOCK, Black K75-16469

IHL Speed Strip Wallet.38/.357 6-rd. K75-18308 $26.50.38/.357 8-rd. K75-18987 $26.50.44/.45 6-rd. K75-18988 $26.50.410 Ga. 6-rd. K75-18990 $29.95.500 S&W 6-rd. K75-18989 $26.50

IHLINTERNATIONAL HANDGUN LEATHERby Ian Martin

IHL Hammerhead Shark 1911Slide K75-19230 $114.951911Pouch K75-19231 72.95

THE WILDERNESS TACTICAL PRODUCTSTHE WILDERNESS TACTICAL PRODUCTS

27

A.

C.

D.

A./B. Rollypoly Folding Dump Pouch K75-19999 $25.99(A.)Open: 6” Diameter 8” Tall (B.)Folded: 3”x 3”x 1.75”

C. Spartan Wallet, Foliage Green (folded) K75-19993 19.99D. Spartan Wallet, Black (open) K75-19992 19.99

MAXPEDITION HARD-USE GEAR

B.


“Revolution” Holster SeriesBlade-Tech used its extensive knowledge of Kydex© holstermaking to bring youthe Revolution line of holsters. Using a proprietary blend of polymers, Blade-Tech has engineered these holsters to offer lifetime performance in a widerange of conditions. The holsters won’t become soft in extreme temperatures(over 300º F) and won’t become fragile in low temperatures. Colt 1911 K75-40011 $29.99GLOCK 17/22 K75-40012 29.99GLOCK 19/23 K75-40013 29.99GLOCK 20/21 K75-40069 29.99GLOCK 34/35 K75-40068 29.99Smith & Wesson 4” M&P K75-40067 29.99Springfield 4” XD 9/40 K75-40071 29.99Springfield 5” XD 9/40 K75-40070 29.99

Single Mag $19.99 ea. 1911 K75-40018 Sm. GLOCK K75-40019Lg. GLOCK K75-40020B92/XD/CZ etc. K75-40021

Double Mag $26.99 ea. 1911 K75-40022 Sm. GLOCK K75-40023Lg. GLOCK K75-40024B92/XD/CZ etc.K75-40025

Quad Mag $39.99 ea. 1911 K75-40026 Sm. GLOCK K75-40027B92/XD/CZ etc.K75-40028

AR-15 Single Tek-Loc™Mag Pouch

K75-40034 $29.99

AR-15 Double Tek-Loc™Mag Pouch

K75-40033 $39.99

AR-15 Triple Dropped Mag PouchK75-40032 $74.95


28

Blade-Tech Holster/Mag Pouch Hardware (left to right)Large Tek-Loc™ Universal Belt Clip with Hardware K75-40029 $8.95Tek-Loc™ Dropped Offset Holster Attachment K75-40016 19.99Dropped Offset Holster Belt Loop Attachment K75-40017 19.99 Mini Tactical Modular Mount System with Hardware K75-39920 24.99

BLADETECH Ambi Eclipse™ Straight-Drop Holster1911 K75-40117 $79.99GLOCK 17 K75-40118 79.99GLOCK 19 K75-40119 79.99GLOCK 26 K75-40120 79.99GLOCK 34 K75-40121 79.99GLOCK 42 K75-40126 79.99S&W M&P 4.5” 9/40 K75-40123 79.99Springfield XD 4” 9/40 K75-40122 79.99Springfield XDM 4.5” 9/40 K75-40124 79.99Springfield XDM 5.25” 9/40 K75-40125 79.99

BLADETECH 1.5” Inner/Outer Hook & Loop Belt32” K75-12242 $59.9934” K75-12243 59.9936” K75-12245 59.9938” K75-12246 59.9940” K75-12247 59.9942” K75-12249 59.9944” K75-12251 59.9946” K75-12253 59.9948” K75-12255 59.99

NEW!NEW!

Safariland Custom Fit 567 Holsters The Model 567 Custom Fit holster is one of the lightest, thinnest, best fitting

concealment holsters available. True to its name, it adjusts to a wide variety ofpopular handguns, giving each a “custom fit” in this holster.2” Revolvers K75-19261 $43.954” K & L-Frame S&W, Ruger, and Colt Rev. K75-19262 43.95

4” N-Frame S&W Revolvers K75-19263 43.955” N-Frame S&W Revolvers K75-19264 43.95Beretta Compact, Taurus Compact, CZ-75, Colt Commander Model K75-19265 43.95Beretta, Taurus, Browning HP, Colt 1911 K75-19266 43.95Colt Officers’ Model, GLOCK 19/23, SIG P228, HK USP Compact 9/40 K75-19267 43.95GLOCK 17, 20, 21, 22, HK USP 9/40, Ruger P Series, SIG P220 K75-19268 43.95Safariland Model 6377 ALS™ Holsters

The Model 6377 is a concealment version of the all new Automatic LockingSystem series holster. Once the weapon is holstered, it locks into place, provid-ing an extra measure of security from the standard open-top holster.Colt 1911 K75-40072 $39.95GLOCK 17/22 K75-19444 39.95GLOCK 20/21 K75-19443 39.95GLOCK 34/35 K75-40073 39.95SIG 220/226 K75-19446 39.95SIG 220/226 with Accessory Rail (no light) K75-19447 39.95SIG 228 K75-19445 39.95S&W M&P 9/40 K75-19448 39.95Springfield 4” XD 9/40 K75-40074 39.95Springfield 5” XD 9/40 K75-40075 39.95Springfield XDM 9mm K75-40076 39.95Springfield XDM .40 K75-40077 39.95

29


SafarilandCustom Fit

567

SafarilandModel6377 ALS™

Comp-Tac: Holsters Dedicated to Your VictoryComp-Tac: Holsters Dedicated to Your Victory

Comp-Tac International The International features a modular mounting system that offers the versa-

tility of different mounting options, combining a belt holster, belt drop offsetholster, paddle holster and paddle drop offset holster into one. GLOCK 17/22 K75-40110 $69.00GLOCK 34/35 K75-40109 69.00S&W M&P 9/40 K75-40111 69.00S&W M&P Pro K75-40112 69.00Springfield XD Tactical 9mm K75-40116 69.00Springfield XDM 4.5 9/40 K75-40115 69.00Springfield XDM 5.25 9mm K75-40113 69.00Springfield XDM 5.25 .40 K75-40114 69.00

Comp-Tac Infidel Ultra An inside-the-waistband holster combining the wearability of the Comp-Tac

Minotaur MTAC with the simplicity and convenience of The Infidel. Ideal forthe individual who needs to safely take his or her weapon off and on through-out the course of the day.Colt 5” 1911 K75-40102 $90.00GLOCK 17/22 K75-40103 90.00GLOCK 19/23 K75-40104 90.00S&W Shield K75-40105 90.00S&W M&P 9/40 K75-40106 90.00Springfield XD-S K75-40107 90.00Springfield XDM 4.5 9/40 K75-40108 90.00

SAFARILANDHolsters

TUFF PRODUCTS THAT PROTECT

TUFF InLine MOLLE Mag Bag™ is apadded case made of 1000 Denier Cor-

dura® with a polymer-reinforced rear panelthat holds both rifle and pistol magazines. Coyote Brown K75-15772 $79.95Black K75-15771 79.95

TUFF i Tuck ConcealCarry Phone/Firearm

Holster. Holds iPhone 4/5,Samsung™ Galaxy™ orsimilar (up to 5.5” tall x 3.5” wide x 1”deep) and hidden holster pocket fits RugerLCR/Kel-Tec P3AT or similar.Coyote Brown K75-15775 $39.95Black K75-15777 39.95

TUFF 3 Gun Ammo Bags (Set of 3) aremade of 1000 Denier Cordura® and

equipped with dual 550 cord cinch stringsfor secure closure. The Red/Blue bags holdup to 200 loose pistol/rifle rounds and Blackbag holds up to 200 loose shotgun rounds. 3 Gun Ammo Bags K75-15773 $19.95

NEW!NEW!

SUPER 1050SUPER 1050

SUPER 1050 Stock Numbers.223 Remington K75-21130.223 Rem./Carbide (*$1793.95) K75-21131.22-250 Remington K75-21129.243 Winchester K75-21126.270 Winchester K75-18491

6.8 SPC (*$1769.95) K75-21150(6.8 SPC comes with lg. and sm. primer systems)

.30 M1 Carbine (*$1734.95) K75-21142

.300 WSM (*$1784.95) K75-21110

.30-30 Winchester K75-210037.62x39 (*$1769.95) K75-21144(7.62x39 comes with lg. and sm. primer systems)

.303 British K75-21060

.308 Winchester K75-21058

.308 Win./Carbide (*$1801.95) K75-21068

.30-06 Springfield (*$1784.95) K75-21059

.45-70 Gov’t (*$1829.95) K75-21064

.32 S&W K75-21134

.380 ACP K75-211359mm Parabellum K75-21067.38 Special K75-21136.357 Magnum K75-21137.357 SIG (*$1749.95) K75-21127.38 Super K75-21132.38 Super Comp K75-21069.38-40 Winchester K75-21158.40 S&W K75-2107010mm K75-21138.41 Magnum K75-21139.44 Special K75-21140.44 Magnum K75-21141.44-40 Winchester K75-21159.45 ACP K75-21061.45 Colt K75-21133.45 GAP K75-21002.500 S&W (*$1784.95) K75-20428

STANDARD FEATURES:• Automatic Indexing• Commercial Grade Machine• Swages Military Primer Pockets• Loading Rate: 1000-1200 Rds/Hr• Includes One Caliber Conversion• Factory Adjusted Reloading Dies• Automatic Powder Measure• Automatic Primer System• Automatic Casefeeder

All for ONLY...$171995**Prices vary on exotic-caliber machines.


Powdercheck System K75-21044 $68.95Low Powder Sensor K75-16306 $41.95Aluminum Bullet Tray K75-22215 $41.95

Super 1050 DVD Instruction ManualK75-19485 $19.95

30

C. POWDER CHECK SYSTEM Developed for the XL 650, now avail-able for the 1050!


D. PRIMER PICKUP TUBESUsed to transfer primersfrom flip tray to primingsystem.1 Lg. tube K75-22029 $7.991 Sm. tube K75-22028 7.992 Sm., 2 Lg. K75-20056 23.954 Lg. tubes K75-20050 23.954 Sm. tubes K75-20049 23.95

E. PRIMER FLIP TRAYA heavy, high-quality tray large enough for theFederal primer package. K75-13606, $20.95

E.

D.

A(1).

A(2). F. 1050 MACHINE COVERThis great looking nylon coveradds security to your loadingbench. Comes equipped with aD-ring, allowing the heavy-dutyzipper to be locked.Cover,K75-13239, $39.95

(G.)Master lock,K75-13083, $3.95

G.

C.

F.

A(3). 1050 PRIMER SYSTEMLarge primer system conversion K75-20476 $106.95Small primer system conversion K75-20419 106.95A(4). EXTRA CASEFEED PLATELarge pistol K75-21072 $38.95Large rifle K75-21075 38.95Small rifle K75-21074 38.95Small pistol K75-21073 38.951050 POWDER MEASURE K75-20421 $81.951050 TOOLHEAD K75-20420 $198.95

A(1). QUICK-CHANGE TOOLHEAD CONVER-SIONIncludes:•Toolhead •Powder Measure

K75-21393, $270.95

A(2). CALIBER CONVER-SIONIncludes:•Shellplate•Locator Buttons•Swage Backup Rod/ Ex-pander•Casefeed Adapter•Casefeed Plunger•Powder Funnel

1050 Accessories

H. RL 1050 BULLET TRAYDesigned for “economyof motion” when load-ing. Our new bullet trayis made of durable castaluminum and is DillonBlue powder coated.

K75-22215, $41.95

H.

K. 1” BENCH WRENCHK75-10842, $7.95 each.Two or more, $7.10 each.

K.

I. SPARE PARTS KIT1 Super 1050 Spring Bushing1 Cam Guide Bolt 1/4-201 Super 1050 Toolhead Spring1 Priming Station Retaining Tab1 Ratchet Restriction Tab4 Lock Ring Inserts3 Pistol Decapping Pins2 #10 Tinnerman Inserts1 1/4” E-Clip3 Bellcrank Cubes2 Primer Punch Springs2 1/4-20 3/8 BH Screws4 Locator Pins (#1, #2, #3, #4)1 Tab/Spring Arm Spring2 Pickup Tube Tips, Small (Yellow)2 Magazine Orifices, Large (Red)

2 Pickup Tube Tips, Large (Green)2 Magazine Orifices, Small (Blue)2 Retaining Clips1 Slide Roll Pin Sleeve2 Dispensing Tips, Small2 Dispensing Tips, Large

K75-20779, $32.95

B. LOW POWDER SENSORProvides an audible and visualreminder when it’s time to refillyour powder reservoir. When thepowder level drops to about1000 grains, a buzzer will soundand a bright red LED will light.

K75-16306, $41.95

B.

J. MACHINE MAINTENANCE KITEverything you need tokeep your Dillon loadercleaned and lubricated upto factory specifications.Available in combinationwith a spare parts kit foryour machine. Maint. Kit & 1050 Spare Parts Kit K75-97018, $46.95

L. BUSHING DRIVERK75-20341, $12.95 ea.

L.

M. MOUNTING HARDWARE KITIncludes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4Flat Washers, 4-Fender Washers, 2-Wood Screws.

K75-14355, $5.49

.32 S&W K75-20634 $121.95

.32 ACP K75-20633 121.95

.380 Auto K75-20483 121.959mm K75-20482 121.95.38 Super K75-20484 121.95.38 Super Comp K75-21057 121.95.38/.357 Magnum K75-20477 121.95.357 SIG K75-20068 121.95.40 S&W K75-20545 121.9510mm K75-20788 121.95.41 Magnum K75-20478 121.95.44 Magnum K75-20479 121.95.44-40 Winchester K75-21161 121.95.45 ACP K75-20480 121.95.45 Colt K75-20481 121.95.45 GAP K75-21010 121.95.475 Linebaugh/.480 Ruger K75-20833 158.95.500 S&W Magnum K75-20834 158.95.223 Remington K75-20485 121.95.22-250 K75-21055 139.95.243 Winchester K75-21054 139.95.270 Winchester K75-21053 139.95.30 Carbine K75-20626 139.957.62x39 K75-20631 158.95.300 WSM K75-20466 158.95.303 British K75-21051 121.95.308 Winchester K75-21049 139.95.30-06 Springfield K75-21050 201.95.30-30 Winchester K75-21052 139.95.45-70 Government K75-21056 172.95

31


32

Protect your handguns withDillon’s rugged, padded pis-

tol cases. These cases feature apouch on one side for cleaninggear or other accessories and

magazine/ speedloaderpouches on the other.The “Small” DillonPistol Case will

accommodate most “Limited”class autos and the “Large” casewill accept pistols with scopesand extended compensators.

Small – 7.5”x 11.5” K75-10161 $18.95Large – 9.5”x12.5” K75-10162 21.95

Dillon Pistol CasesDillon Pistol Cases

I.D. Card Holder K75-14575 $2.95

Black Ammo Bag K75-13755 $25.95

Dillon’s two-compartment ammo bag is constructedwith a flexible inner liner that will allow the entire

volume to be accessible from either zippered opening.You’ll never again mix fired brass with loaded rounds!

Dillon Range Bag Dillon Range Bag

‘Border Shift’ Ammo Bag‘Border Shift’ Ammo Bag

Dillon’s NewRange Bag is de-

signed to hold theStage Bag (inset, topleft) or a BorderShift Ammo Bag(sold separatelybelow), as well as a DillonLarge Utility Box (see Page 36).The Main Compartment is 12.5”long x 7” wide x 10” high, the EndPockets are 8.5” tall x 6.5” wide x2” deep and the Front Pocket is 9” tall x 6” wide x 2” deep. Range Bag, Black K75-19366 $89.95Stage Bag K75-19259 29.95Pistol Pouch, Black K75-17027 10.95

Magazine Base Pad Tool/Scope Battery Cap Remover

Scope WindageAdjustment Tool

This is a MUST-HAVE range-bag accesso-ry. It’s a squib rod (for removing stuck

bullets), magazine base removal tool, andscope windage adjustment and battery capremoval tool.

K75-15250 $12.95

Arredondo Multi-Function Squib Rod

Secure Firearm Products Secure-Mat

The Secure-Mat features a magnetic cor-ner that keeps small parts in place when

you field strip your firearm for cleaning. Itssoft, non-slip neoprene construction pro-tects both your firearm and the work sur-face. It’s ideal for when you’re shooting anout-of-town match and have to clean yourpistol in a motel room!

K75-19398 $27.50

The Otis Technology, Inc. Breech-to-Muzzle Cleaning System cleans rifles

.22 to .50 cal., shotguns .410 bore to 10gauge and pistols .22 to .45 cal. The systemincludes three memory-flex rods, threeforged brass tips, two obstruction removers,a T-handle, 0.5 ounce solvent, all-caliberpatches, a shotgun brush adapter, twopatch savers, five bore brushes, a borereflector and a cleaning guide. Lifetimewarranty!

K75-18174 $39.95

Arredondo Accessories’ Magazine-CleaningBrush is ideal for that little job we all dread

(avoid?)! No excuse, Sir! K75-19257 $11.95

Bomber GlassesBomber GlassesBomber Glasses’ lenses andframes are made from High-Index Polycarbonate that isdurable, flexible and impactresistant. All colors provideUV protection.

Clear K75-10513 Smoke K75-10514 Light Blue K75-10515Yellow K75-10516Amber K75-10517Smoke Mirror K75-10518

$999

AO Safety/Peltor JuniorEye & Ear Protectionand MAX Earplugs

Ear Pro EP3 Sonic Defenders® by SureFire® protect you againstloud, harmful noises, yet allow normal conversations to be

heard; and the soft, hypoallergenic polymer provides all-day com-fort. NRR 24Small EP3 Sonic Defenders K75-25340 $12.95Medium EP3s (Fit Most People) K75-25341 12.95Large Ear Pro Sonic Defenders K75-25342 12.95

EP3 Sonic Defenders

AO Safety/Peltor Junior Eye & Ear ProtectionPeltor Junior Earmuff (NRR 17) K75-10402 $22.95AO Safety Junior Shooting Glasses K75-11403 9.95Save $4.95 when you buy Earmuff/Glasses Combo!K75-11092 27.95MAX EarplugsMAX Earplugs (NRR 33) 200 Pack K75-10456 $40.00



34Dillon’s Pistol Die SetsHex Adjustments

for WrenchQuick-Release

Die Inserts

Large,RadiusedMouths

Heavy,Headed

Decap Pin

Long,TaperedCarbide

Ring

UniqueFloatingDecapAssy.

RadiusedCarbide

TighterACCU-CRIMP

Die

VentedSeating

Stem

Sizing/Depriming DieOur sizing/depriming dies feature a unique “floating

decap assembly” with a snap spring that throws the spentprimer off the pin and eliminates the problem of primer“draw back” that often occurs when decapping militarybrass. The primary feature of Dillon’s size die design – thelong, tapered carbide ring with a radiused opening –remains unchanged.

That radiused opening, and its importance to progressivereloading, is one of the reasons why our seat and crimp diesare better. We found a way of manufacturing these dies thathas enabled us to make the lead-in radius even bigger! Thebigger radius makes progressive loading with our equipmenteven smoother – but that’s still only a part of the story.

Bullet Seating DieOur new quick-disassembly seat die allows the user to

disassemble and clean the seat die without losing adjustment.In this manner, bullet lube and shavings can be quicklyremoved from the die, thereby guaranteeing a constant seat-ing depth. We’ve incorporated a “flip-flop” seating stem and aclip that enables you to remove the die insert and change theseating stem from round nose to semi-wadcutter withoutunscrewing a seating stem out of the die body. We’ve alwaysincluded both types of seating stems, but the new double-ended design makes it a simple matter to remove a pin,reverse the seating stem, make any minor seating depthadjustments that may be necessary and go on loading in afraction of the time it used to take.

Crimp DieWe’ve made it easy for you to remove the die insert for

cleaning without having to change the critical crimp adjust-ment. Once your crimp die is set for the proper amount ofcrimp, you’ll never have to change it. This is especially goodnews for all of you who load lead bullets! Before, you had tounscrew the die from the toolhead and disassemble the die inorder to remove any bullet lube or lead residue. Then, youhad to start from square one to re-adjust the crimp. Thosedays are over. All you have to do now is pop a clip and thedie insert drops into your hand for cleaning.

NOTE: All Dillon Pistol Die sets include our sizer/ decap die,seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)

Dillon Pistol Dies (Three-Die Sets).32 S&W/.32 H&R Magnum K75-14426 $63.95.380 ACP K75-14401 63.959mm Parabellum K75-14406 63.959x25 Dillon K75-14601 132.95.357 SIG K75-22083 132.95

.38 Super K75-14399 $63.95

.38 Special/.357 Magnum K75-14400 63.9510mm/.40 S&W K75-14398 63.95.41 Magnum K75-14402 63.95.44 Special/.44 Magnum K75-14403 63.95.45 ACP/.45 GAP K75-14404 63.95.45 Colt K75-14405 63.95Dillon Carbide Size/Deprime Dies .32 S&W/.32 H&R Magnum K75-14119 $33.45.380 ACP K75-14410 27.459mm Parabellum K75-14415 27.459x25 Dillon K75-14602 104.95.357 SIG K75-16513 104.95.38 Super K75-14408 27.45.38 Special/.357 Magnum K75-14409 27.4510mm/.40 S&W K75-14407 27.45.41 Magnum K75-14411 27.45.44 Special/.44 Magnum K75-14412 27.45.45 ACP/.45 GAP K75-14413 27.45.45 Colt K75-14414 27.45Dillon Seating Dies.32 S&W/.32 H&R Magnum K75-14106 $25.45.380 ACP K75-14419 25.459mm Parabellum K75-14424 25.459x25 Dillon K75-14603 28.45.357 SIG K75-16515 28.45.38 Super K75-14417 25.45.38 Special/.357 Magnum K75-14418 25.4510mm/.40 S&W K75-14416 25.45.41 Magnum K75-14420 25.45.44 Special/.44 Magnum K75-14421 25.45.45 ACP/.45 GAP K75-14422 25.45.45 Colt K75-14423 25.45Dillon Crimp Dies.32 S&W/.32 H&R Magnum K75-14107 $24.45.380 ACP K75-14438 24.459mm Parabellum K75-14443 24.459x25 Dillon K75-14604 27.45.357 SIG K75-16514 27.45.38 Super K75-14436 24.45.38 Special/.357 Magnum K75-14437 24.4510mm/.40 S&W K75-14435 24.45.41 Magnum K75-14439 24.45.44 Special/.44 Magnum K75-14440 24.45.45 ACP/.45 GAP K75-14441 24.45.45 Colt K75-14442 24.45Spare Decapping PinsPackage of 10 K75-21528 $5.75

Size Die• Floating Decap Assembly EliminatesPrimer “Draw Back”

• Long, Tapered Carbide Ring• Radiused Opening Makes ProgressiveLoading Smoother

Seat Die• Reversible Seating Stem Makes it Easy to Change Bullet Styles

Crimp Die• Quick Disassembly, Easy to Clean

35


Dillon Three-Die Rifle Die Sets include a sizing/depriming die, a bullet seating die and a taper crimpdie. Dillon Two-Die Rifle Die Sets include asizing/depriming die and a seat/crimp die.

Sizing/Depriming DieThe sizing/depriming die is full-length, to mini-

mum tolerances, sizing cases down to function insemi- and full-automatic firearms. We strongly sug-gest that a headspace case gage be used to correctlyadjust the size die.

For high volume users, such as commercialreloaders, law enforcement agencies, and highpower or service rifle competitors, we also offer .223and .308 die sets with a full-length carbide sizingdie. Lubrication is still required, but the increasedscratch resistance and die longevity of carbide are ofgreat benefit to these groups of users.

The depriming assembly includes a carbideexpander ball for “squeak-free,” effortless neckexpansion. This expander ball is located in the mid-dle of the depriming stem to take advantage of supe-rior initial leverage for easier extraction.

In the event of a stuck case, the design of thedepriming assembly allows it to function as a stuckcase remover.

Bullet Seating DieOur bullet seating die is internally designed to keep

the bullet straight throughout the seating process.Once properly adjusted, the only measurable runoutwill be that which is inherent in the bullet.

Taper Crimp DieThe taper crimp die is also specially configured to

center both the case neck and the case body, therebyaligning the entire cartridge for a more uniformcrimp. Dillon Rifle Dies are designed to meet themore rigid requirements for both accuracy and preci-sion demanded by today’s marksman.

A taper crimp die is preferred for loading ammu-nition intended to be used in semiautomatic firearmswith detachable box magazines, and in lever-actionfirearms with tubular magazines.

Dillon Rifle Dies (Three-Die Sets).223 Remington K75-10839 $66.95.308 Winchester K75-15574 66.95.30-06 Springfield K75-10840 66.95Dillon Carbide Rifle Dies (Three-Die Sets).223 Remington K75-10096 $162.95.308 Winchester K75-10793 168.95Except where noted, die sets include three dies:carbide size/decap, a seater and a separate crimpdie. PLEASE NOTE: Carbide rifle dies still requirecase lubrication!Dillon/Redding .30 M1 Carbine Three-Die SetIncl: Dillon carbide size die, Redding seat & crimp dies..30 M1 Carbine Die Set K75-20625 $103.95Dillon Size Dies.223 Remington K75-12778 $41.95.223 Remington (Carbide) K75-10223 136.95.30 M1 Carbine (Carbide) K75-97039 72.95.308 Winchester K75-10242 41.95.308 Winchester (Carbide) K75-10234 149.95.30-06 Springfield K75-12238 41.95Universal Decapping Die K75-22127 $26.95Dillon Seat Dies.223 Remington K75-21672 $29.95.308 Winchester K75-21674 29.95.30-06 Springfield K75-21673 29.95Dillon Taper Crimp Dies.223 Remington K75-21676 $27.55.308 Winchester K75-21678 27.55.30-06 Springfield K75-21677 28.55Spare Decapping Pins.223 Remington K75-13278 $3.99.308 Winchester K75-13132 3.99.30-06 Springfield K75-13069 3.99For Universal Decapping Die K75-15816 3.99Spare Dillon Die Lock Rings (Fit all 7/8” x 14 thread dies)Dillon Die Lock Ring K75-14067 $1.355-Pack Die Lock Rings K75-10669 4.15

Size Die• Full-length, to minimum tolerance

• Carbide expander ball

• Features stuck case remover

Seat Die• Designed to hold bullet straight

throughout the seating process

Taper Crimp Die• Centers case neck and body for

a more uniform crimp

Hex Adjustmentsfor Wrench

Stuck Case Remover

Solid,1-Piece

DecappingPin

RadiusedMouth

Precise,Uniform

Taper CrimpSize DiePolishedto a High

Micro-Finish

Standard7/8 x 14Threads

CarbideExpander

Ball

Dillon’s Rifle Die Sets

Try a few of Dillon’s heavy-duty, lightweight plastic ammo boxes. If you’re like us, you’re tired of crumbling

styrofoam and cardboard boxes held together with layersof tape. These boxes are perfect for range or field use.

Designed to keep out dirt, dust and rain.

Dillon Utility BoxesDillon’s Utility boxes are ideal for all those accessories that

don’t quite fit into the compartments of your shooting bag. The large box measures 13-1/2" x 5-3/4" x 2-1/4" and the smallbox measures 4-5/8" x 6-3/8" x 1-5/8". Use them for cleaning gear,extra magazines, repair parts, first aid supplies, reloading acces-sories and tools – the list is endless. Description Stock # Each 5 ea. Small Utility Box K75-13636 $2.65 $10.95 Large Utility Box K75-17195 5.75 23.95

Dillon AkroBinsAkroBins are perfect for reloaders who load several calibers, bul-

let weights, bullet shapes, etc. We’ve been including these binswith our machines for years, and now we’re stocking them in quan-tity for our customers. • The small bins (the ones we use as Square Deal “B” cartridge

bins) are 4-3/4" long x 3-7/16" wide x 2-13/16" deep. • The RL 550B/XL650 cartridge bins are 6-3/4" long x 3-7/16"

wide x 2-13/16" deep.• The 1050 bins are 10-1/4" long x 4-3/8" wide x 4-3/4" deep. • The double-extra-large bins we use on our SL 900 measure 13-

3/4" long x 6-1/2" wide x 6-3/4" deep (all inside dimensions).AkroBins are made of heavy-duty polypropylene with perma-

nent, molded-in color (ours are blue). They’re virtually unbreak-able; unaffected by weak acids and alkalis, and are also water, rustand corrosion proof. Hang ’em, stack ’em, rack ’em and fill ’em –you just can’t beat ’em! Buy several and get your “stuff” together.Description Stock # Each 6 ea. 12 ea.“Square Deal” Bin K75-13756 $2.95 $15.30 $24.84“RL 550/XL 650” Bin K75-13839 2.95 15.30 24.84“RL 1050” Bin K75-13484 6.95 34.92 61.92“SL 900” Bin K75-17125 10.50 56.94 106.92

Dillon Ammunition BoxesDescription Stock # Each 10 ea. Case(Qty.) 9mm (50 rd) K75-13784 $1.58 $13.50 $58.00(50)9mm (100 rd) K75-13645 1.81 15.40 66.00(50).38/.357 (50 rd) K75-13476 1.79 14.70 63.00(50).38/.357 (100 rd) K75-13766 2.20 18.80 80.50(50).44 (50 rd) K75-13568 1.79 15.30 65.50(50).44 (100 rd) K75-13680 2.92 24.90 106.50(50).45 ACP (50 rd) K75-13715 1.73 14.70 63.00(50).45 ACP (100 rd) K75-13574 2.83 24.20 103.50(50)Small Rifle (50 rd) K75-13740 2.05 17.50 75.00(50)Medium Rifle (20 rd) K75-13625 2.05 17.50 120.00(80)Medium Rifle (50 rd) K75-13665 2.90 24.70 106.00(50)Large Rifle (20 rd) K75-13647 2.01 17.20 73.50(50)Large Rifle (50 rd) K75-13231 3.20 27.30 117.00(50)NOTE: “.38” series cases fit .38 Super, .32-20, .30 Carbine and .30 Mauser; “9mm” se-ries cases fit .30 Luger, 9 x 21 and .380; “.44” series cases fit .41 Mag, .44-40 and .45Colt; and “.45” series cases fit 10 mm and .40 S&W. “Small rifle” cases fit .222, .223 to7.62 x 39 length; 20 round “medium rifle” cases fit 7.62 x 39, .22-250 to .30-06length; 50 round “medium rifle” cases fit .22-250, .308 to .30-30 length; and “largerifle” cases fit .30-06, 8 x 57 length to all belted cartridges.Extra Loading Data Labels, K75-10446, Package of 100, $6.95

Get your “stuff” together, then keep it that way!


36

Berry’s Manufacturing Ammo/Storage BoxesDescription Stock # Each 10 ea. 50 ea..500 S&W (50 rd) K75-19243 $2.98 $22.40 $97.00Note: .500 S&W Ammo Boxes also fit .223/.243/.308 WSSM Cartridges

.454 Casull (50 rd) K75-19244 2.98 22.40 97.00

.45/70 (50 rd) K75-19245 3.29 24.20 105.007.62 x 54R (50 rd) K75-19247 3.50 25.50 110.50.300 Ultra (50 rd) K75-19246 3.50 25.50 110.5020 Ga. (25 rd) K75-19248 2.24 16.80 72.5012 Ga. (25 rd) K75-19249 2.24 16.80 72.50Storage Boxes4-3/8”x 2”x 1-5/8” K75-19250 $1.12 $8.40 $36.504-1/2”x 4-1/2”x 1-5/8” K75-19251 2.32 17.40 75.505-1/2”x 2-5/8”x 2-1/2” K75-19252 2.22 16.70 72.00

37

Color Coded Aluminum Toolheadsfor Your RL 550B & XL 650

Blue Anodized RL 550B Toolhead K75-62132 $29.95Black Anodized RL 550B Toolhead K75-62133 29.95Gold Anodized RL 550B Toolhead K75-62134 29.95Silver RL 550B Toolhead K75-62135 29.95

Blue Anodized XL 650 Toolhead K75-62136 $34.95Black Anodized XL 650 Toolhead K75-62137 34.95Gold Anodized XL 650 Toolhead K75-62138 34.95Silver XL 650 Toolhead K75-62139 34.95

$7995

If Cowboy Action Shooting is yourgame, why not CARRY the gun you

shoot the most? These holsters can beworn strong side, appendix carry orcross draw and are fully molded. Nowalso available for J-Frame S&Ws.4-3/4” SA Colts/clones K75-11560 4-5/8” Ruger Blackhawk K75-15765 2” J-Frame S&W Rev. K75-15764Ruger LCR K75-29030

Mernickle Holsters’Conceal-Carry

Performance Series

“Wild Bunch” 1911 Holster & Mag PouchThis holster/mag pouch was designed in

a joint effort by World Cowboy ActionShooting Champion Gene “Evil Roy”Pearcey and World Fast Draw ChampionBob Mernickle when SASS introduced the“Wild Bunch” category for CowboyAction Shooting.

When these two champions put theirheads together, they created a holsterand mag pouch that look like they weremade at the turn of the century, yet fea-ture state-of-the-art speed and accuracy.The holster is hard molded so as not tolose its shape even after thousands ofdraws. It spaces the pistol’s grip frame

away from your body so you’ll get a fullcombat grip, and the holster includes theT-nut lock system to ensure that it staysin place during a draw.

The mag pouch spaces the maga-zines so when you grab one mag, thesecond isn’t in your way; above thebelt line so the belt doesn’t interferewith the draw; and at the max depthrequired by the sport – and no more –so you’ll get a full grip and the abilityto index with your forefinger for arapid mag well insert.1911 Holster K75-19947 $139.95Mag Pouch K75-19946 44.95

SL 900SL 900

STANDARD FEATURES:• Automatic Indexing• Auto Powder/Priming Systems• Adj. Case-Activated Shot System• Factory Adjusted to Load AA Hulls• Factory Adjusted Loading Dies• The Original Tilt-Out Wad Guide• Lifetime “No-B.S.” Warranty

All for ONLY...$91995

$1149.90 with Casefeeder12 Gauge K75-9711020 Gauge K75-9712328 Gauge K75-97124Comes with factory adjusted dies.


12 Gauge Casefeeder (pictured) K75-97037 $229.9520/28 Gauge Casefeeder K75-97036 $229.9512 Ga. Euro. 220v Casefeeder K75-97118 $239.9520/28 Ga. Euro. 220v Casefeeder K75-97125 $239.95Aluminum Roller Handle K75-17950 $45.95Low Powder Sensor K75-16306 $41.95

Dillon’sRevolutionaryShotshell Loader

Dillon’sRevolutionaryShotshell Loader


.32 Auto 5 pack K75-10923 $16.65

.380 Auto 5 pack K75-10795 16.659mm Luger 5 pack K75-10798 16.65.357 SIG 5 pack K75-10794 16.65.40 S&W 5 pack K75-10796 16.65.45 ACP 5 pack K75-10797 16.65.38 Special 6 pack K75-10801 19.98.357 Magnum 6 pack K75-10800 19.98.44 Magnum 6 pack K75-10802 19.98

.44-40 Winchester 6 pack K75-10803 19.98

.45 Colt 6 pack K75-10804 19.98

.223 Remington 2 pack K75-10810 9.99

.22-250 2 pack K75-10809 9.99

.243 Winchester 2 pack K75-10811 9.99


.30 M1 Carbine 2 pack K75-10813 9.99

.30-30 Winchester 2 pack K75-10815 9.99

.303 British 2 pack K75-10816 9.99


.30-06 Springfield 2 pack K75-10814 9.99

.45-70 Government 2 pack K75-10818 9.996.5x55 Swedish 2 pack K75-10819 9.997.62x39 Russian 2 pack K75-10820 9.9912 Gauge 2 pack K75-10805 9.9920 Gauge 2 pack K75-10806 9.9928 Gauge 2 pack K75-10807 9.99.410 Bore 2 pack K75-10808 9.99

Hard-anodized, solid alu-minum snap caps with a

secret “Dead Cap” insert thatprotects your firing pin andoutlasts brass by 20 times.Quite simply the best snapcaps we’ve ever seen.

A-ZOOM Ammo Premium Metal Snap-Caps

Saf-T-TrainerMolded PlasticDummy/TrainingAmmoSold in packages of five:.22 LR K75-10086 $4.959mm K75-10087 4.95.38/.357 K75-10088 4.95.40 S&W K75-10060 4.95.44 Mag. K75-10061 4.95.45 Colt K75-10061 4.95

.45 ACP K75-10062 4.95

.223 K75-10063 4.957.62x39 K75-10064 4.95.308 K75-10065 4.95.30-06 K75-10066 4.9520 Ga. K75-10067 7.9512 Ga. K75-10068 7.95

Made of super tough nylon with a melting point of 480degrees. Kit includes one shotgun chamber flag and one

for your AR-15. K75-15485 $11.95

Arredondo Accessories’ Multi-Gun Chamber Flags

C. SL 900 MACHINE COVERThis heavy-duty nylon cover

comes equipped with a D-ring,allowing the zipper to be locked.K75-13239, $39.95 (D.) Master lock

K75-13083, $3.95

C.

D.

F. WINCHESTER SHOTSHELLWADS

A. SL 900 CONVERSIONS12 Gauge Conversion

K75-20009, $359.9520 Gauge Conversion

K75-22138, $359.9528 Gauge Conversion

K75-22139, $359.9520/28 Gauge Casefeed Plate(not pictured)

K75-97045, $42.95SL 900 Powder System

K75-17817, $76.95

WT12, 12ga, Orange 500 K75-15515 $11.95WAA12, 12ga, White 250 K75-15516 8.95WAA12SL, 12ga, Pink 250 K75-15517 8.95WAA20, 20ga, White 250 K75-15518 8.95WAA28, 28ga, Red 250 K75-15519 8.95WAA41, .410, Red 250 K75-15520 8.95

E. SPARE PARTS KIT1 20 Gauge Yellow Wad Guide1 28 Gauge Green Wad Guide1 20 Gauge Locator Pin1 Index Pawl1 Ring Indexer1 Index Spring Revision A1 Hair Pin Cotter2 Bellcrank Cubes1 Case Insert Slide Spring1 Pawl Spring1 Ejector Wire1 Plastic Wad Guide1 Swing Arm Torsion Spring1 Primer Transfer Arm1 12 Gauge Locator Pin1 Gum Rubber Insert Revision B1 Shot Fitting E-Clip

1 Failsafe Bushing Revision BK75-11154, $26.95

SL 900 Accessories

B. PACKAGE DEALIncludes: Lyman ReloadingHandbook, Clear SafetyGlasses, Dial Caliper, Elimi-nator Scale, Machine Cover,and Low Powder Sensor.

K75-22290, $199.95

39

40

A.

A. B.

C. D.

E.

B. C. D.

California Competition Works’ Tactical Strippers areavailable in three, four or six-shell versions that allow

quick access to your shotgun reloads. Engineered to carryup to 3” magnum* shells as well as the longer Europeanshotshells. All CCW Tactical Strippers are equipped witheither a belt clip (A. & B.) or a UM84 attachment device

(C. & D.) that will accommodate up to a 2-1/4” duty belt.A. Six-Shell Tactical Stripper K75-18606 $23.95B. Four-Shell Tactical Stripper K75-18605 22.95C. Three-Shell Aluminum Stripper* K75-19475 34.95D. Six-Shell Covered Tactical Stripper K75-19225 33.95*Three-Shell Aluminum Stripper accommodates 2-3/4” shells only.

12 Gauge Shotshell Tactical Strippers

TACCOM, LLC’s Duaload ShotshellHolder is available in 2-, 4-, or 6-

Shell versions and can be customized tocarry your shotgun ammo in several con-figurations. The 2Up version can be ei-ther attached to a belt or MOLLE gear,and the 4Up and 6Up versions feature aBLADETECH Tek-Lok™ Universal BeltClip (included) that can be attached atvarious angles. The Duaload allows youto grab two shotshells aligned in such amanner that it makes it easy to load twoat a time into your shotgun. 2Up Belt/MOLLE K75-19530 $9.954Up w/Tek-Lok™ K75-19531 29.956Up w/Tek-Lok™ K75-19532 34.95

TACCOM, LLC’sQuaload Shotshell

Holder is a seriousgame changer! It’s soradical that they arepatenting the device.The Quaload holds the2 columns of shells nextto one another, youcan't get any closer thanhaving them touch. Noother quad load device can do this! This allows for you to controlhow the shell come out of the holer and not have to worry about rimoverlay…the rims are already overlapped in the correct position!4Up Quaload Shotshell Holder K75-19543 $39.958Up Quaload Shotshell Holder K75-19544 69.95

AP Custom USA Shotshell Carriers/Caddies, Mag ID Kits

AP Custom USA’s Shotshell Caddies are 100-percentmachined from solid billet aluminum. The 4x4 Shotshell

Caddy holds four 2-3/4” 12 Ga. shells in two adjacent slots. The4x4 is designed for loading four shells at once, either strong- orweak-handed. The 3x3 Shotshell Caddy holds three 2-3/4” 12Ga. shells in two adjacent slots.

The QL/4 Shotshell Carrier is a four-round 12 Ga. “quad-load” system consisting of a single QL shell carrier mounted toan adjustable billet aluminum backer plate on a Blade-Tech Tek-Lok. The QL/4 backer plate allows the shooter to adjust the angleof the QL to his or her liking. The backer plate is also drilled andtapped to accept Safariland ELS and Blade-Tech MOLLE attach-ments. The QL/8 Shotshell Carrier is an eight-round 12 Ga.“quad-load” system consisting of a two QL/4 shell carriers.

AP Custom USA’s Mag ID Kits enable you to color code andnumber your P-Mags and pistol magazines.

A. QL/8 Shotshell Carrier K75-12220 $99.95B. QL/4 Shotshell Carrier K75-12219 49.95C. 4x4 Shotshell Caddy K75-14343 69.95D. 3x3 Shotshell Caddy K75-14344 69.95

Replacement Spring Kit K75-12221 14.95E. Pistol Mag ID Kit, Black K75-12222 13.95

Pistol Mag ID Kit, Blue K75-12227 13.95Pistol Mag ID Kit, Red K75-12229 13.95

F. P-Mag ID Kit, Black K75-12230 15.95P-Mag ID Kit, Blue K75-12232 15.95P-Mag ID Kit, Red K75-12233 15.95

TACCOM, LLC Tactical and Competition Accessories


F.NEW!NEW!

42

TopBrassLoad-Ready Brass100% ReconditionedAll Top Brass, Inc. reconditionedbrass products receive a full visualinspection prior to packaging.

.223 Remington, 1000 K75-19545 $236.009mm Parabellum, 1000 K75-19546 129.99.40 S&W, 1000 K75-19547 149.99

.223 Cal., 77 gr., HPBT, 100 pk K75-19663 $21.95

.308 Cal., 168 gr., HPBT, 100 pk K75-19665 31.95

“Famous Maker” Match Bullet SecondsWe can’t tell you

whose sec-onds these are, butthey’re seconds onlyfor cosmetic reasons,and would be idealfor loading practicematch ammo.

(This is not LOADED ammunition.)5.56mm/.224 Caliber 52 gr. HPBT MatchKing 100/box K75-10178 $25.9555 gr. BlitzKing 100/box K75-14458 28.9569 gr. HPBT MatchKing 100/box K75-13007 27.95

(Requires 1x7” to 1x10” barrel twist.)77 gr. HPBT MatchKing 500/box K75-18171 157.95

(Requires 1x7” to 1x10” barrel twist.)6mm/.243 Caliber 70 gr. HPBT MatchKing 100/box K75-12386 30.956.5mm123 gr. HPBT 100/box K75-14459 44.95142 gr. HPBT 100/box K75-14460 46.957.62mm/.308 Caliber168 gr. HPBT MatchKing 100/box K75-10177 42.95175 gr. HPBT MatchKing 100/box K75-17481 44.95

Unprimed brass sold in packages of 100 (This is not LOADED ammunition.)Description Stock # 1 Pkg. 5 Pkg. 10 Pkg..32 H&R Magnum K75-30258 $19.00 $88.00 $168.00.32-20 Winchester K75-31282 25.00 116.00 224.009mm K75-31277 17.00 79.00 152.00.38 Short Colt K75-39919 20.00 91.00 175.00.38 Special K75-31278 18.00 80.00 154.00.38 Super +P K75-31276 20.00 90.00 173.00.38 Super Comp K75-30257 20.00 90.00 173.00.357 SIG K75-30528 22.00 102.00 196.00.40 S&W K75-31283 20.00 93.00 180.0010mm K75-31281 21.00 98.00 188.00.45 ACP K75-31284 22.00 99.00 190.00.45 Auto Rim K75-31279 24.00 109.00 209.00.45 Colt K75-30259 24.00 111.00 214.00.500 S&W Magnum K75-38596 61.00 281.00 542.00

Bullets for the 7.62 x 39 Cartridge Description Stock # 250 500 1000123 gr. RN K75-17210 $42.00 $81.00 $150.00.380 Caliber Bullets 100 gr. RN K75-17532 24.00 46.00 85.009 Millimeter Bullets115 gr. RN-DS* K75-17533 25.00 49.00 90.00115 gr. HBRN-TP* K75-17178 27.00 52.00 96.00124 gr. RN-DS* K75-17534 27.00 51.00 95.00124 gr. HBRN-TP* K75-17272 30.00 57.00 106.00147 gr. RN K75-17535 31.00 60.00 110.00.357 Caliber Bullets125 gr. FP K75-17536 28.00 53.00 98.00158 gr. RN-DS* K75-17540 33.00 63.00 117.00158 gr. FP-DS* K75-17539 33.00 64.00 118.00.40 Caliber/10 Millimeter Bullets

155 gr. FP K75-17541 35.00 68.00 126.00155 gr. HBRN-DS* K75-17238 36.00 70.00 130.00165 gr. FP K75-17232 36.00 70.00 130.00165 gr. HBFP K75-17271 41.00 79.00 146.00180 gr. FP-DS* K75-17542 38.00 74.00 137.00180 gr. RS K75-17515 35.30 68.26 127.00.45 Caliber Bullets185 gr. HBRN-DS* K75-17543 41.00 78.00 145.00185 gr. FP K75-17516 35.30 68.26 127.00200 gr. FP-DS* K75-17537 41.00 78.00 145.00230 gr. RN-DS* K75-17549 42.00 80.00 149.00.44 Caliber BulletsDescription Stock # 200 400 800240 gr. FP K75-17545 39.00 76.00 140.00

Berry’s Manufacturing Preferred Plated Bullets

SierraRifle Bullets

*DS = Double Struck, TP = Thick Plate, HB = Hollow Base, RN = Round Nose, FP = Flat Point, SWC = Semi Wadcutter, WC = Wadcutter

StarlineBrass

Privi Partisan Projectiles.223 Cal. 62 gr. FMJ 100/pkg. K75-15810 $11.30.308 Cal. 150 gr. FMJ 100/pkg. K75-15809 27.99.357 Cal. 158 gr. JHP 100/pkg. K75-15808 17.99.40 Cal. 180 gr. JHP 100/pkg. K75-15812 20.99.45 Cal. 230 gr. FMJ 100/pkg. K75-15813 22.99

ARMSCOR Projectiles.30 Cal. (.30 M1 Carbine) 110 gr. 100/pkg. K75-15821 $11.99.357 Cal. 158 gr. FMJ 100/pkg. K75-15819 11.99.45 Cal. 230 gr. FMJ 100/pkg. K75-15814 15.99


Hard-Cast Lead Bullets Stock # 500 10009mm RN 115 gr. K75-15306 $39.00 $73.009mm RN 125 gr. K75-15258 40.00 74.009mm FP 125 gr. K75-15279 40.00 74.009mm RNFP 147 gr. K75-15259 43.00 80.00.38/.357 RN 95 gr. K75-15291 37.00 69.00.38/.357 RNFP 100 gr. K75-15260 38.00 72.00.38/.357 FP 105 gr. K75-15282 39.00 73.00.38/.357 RN 125 gr. K75-15261 40.00 74.00.38/.357 RNFP 125 gr. K75-15307 40.00 74.00.38/.357 DEWC 148 gr. K75-15262 43.00 80.00.38/.357 SWC 158 gr. K75-15263 43.50 81.00 .38/.357 RN 158 gr. K75-15292 43.50 81.00.38/.357 RNFP 158 gr. K75-15264 43.50 81.00 .38/.357 RN 160 gr. K75-15281 43.50 81.00.40/10mm FP 140 gr. K75-15265 42.00 78.00.40/10mm SWC 175 gr. K75-15266 50.00 92.00.40/10mm FP 180 gr. K75-15267 50.50 94.00.40/10mm RN 200 gr. K75-15285 49.00 91.00.44 RNFP 180 gr. K75-15283 50.50 94.00.44 RNFP 200 gr. K75-15274 53.00 98.00.44 RNFP 240 gr. K75-15275 60.00 110.00.44 SWC 240 gr. K75-15276 60.00 110.00.45 SWC 185 gr. K75-15269 50.50 94.00.45 SWC 200 gr. K75-15270 53.00 98.00.45 RN 230 gr. K75-15271 57.00 106.00.45 Colt RN 160 gr. K75-15293 55.00 101.00.45 Colt RNFP 180 gr. K75-15295 51.00 94.00.45 Colt RNFP 200 gr. K75-15272 53.00 98.00.45 Colt RNFP 250 gr. K75-15273 63.00 118.00 Stock # 250 500.45/70 Govt. RNFP 405 gr. K75-15321 $64.00 $120.00

NEW! Coated Bullets Stock # 500 1000.30 M1 Carbine RN 115 gr. K75-15403 $43.00 80.00.380 RN 95 gr. K75-15393 40.00 $74.009mm RN 115 gr. K75-15394 41.00 76.009mm RN 124 gr. K75-15331 42.00 78.009mm FP 125 gr. K75-15396 42.00 78.009mm RN 125 gr. K75-15332 42.00 78.009mm No-Lube-Groove 125 gr. K75-15756 42.00 78.009mm RN 147 gr. K75-15333 47.00 88.009mm/.38 Super RN 160 gr. K75-15397 52.00 97.00.38/.357 RN 95 gr. K75-15858 40.00 74.00.38/.357 RNFP 100 gr. K75-15859 41.00 76.00.38/.357 FP 105 gr. K75-15860 42.00 77.00.38/.357 FP 125 gr. K75-15879 42.00 79.00.38/.357 DEWC 148 gr. K75-15880 47.00 88.00.38/.357 SWC 158 gr. K75-15881 52.00 97.00.38/.357 RN 160 gr. K75-15400 52.00 97.00.40/10mm FP 140 gr. K75-15335 47.00 87.00.40/10mm FP 175 gr. K75-15336 57.00 106.00.40/10mm FP 180 gr. K75-15337 58.00 107.00.40/10mm RN 200 gr. K75-15338 60.00 112.00.40/10mm FP 220 gr. K75-15855 66.00 123.00.44 RNFP 200 gr. K75-15882 60.00 112.00.44 SWC 240 gr. K75-15891 69.00 129.00.45 SWC 185 gr. K75-15856 58.00 108.00.45 RN 200 gr. K75-15339 60.00 112.00.45 RNFP 200 gr. K75-15857 60.00 112.00.45 SWC 200 gr. K75-15340 60.00 112.00.45 RN 230 gr. K75-15401 66.00 124.00 Stock # 250 500.30/30 RNFP 158 gr. K75-15854 $27.00 $50.00


NOTICE: There is a $20.00 minimum ‘Hazardous Material’ (HazMat) handling fee for shipping PRIMERS. This fee is assessedin increments of 10,000 primers. Primer orders MUST be shipped separate from other items, and require a separate shipping

and handling charge. Shipping and HazMat fees are not included in prices.

SNS Casting Hard-Cast Lead Bullets43

By John MarshallIn the “Roaring Twenties” the

standard police sidearm was a.38 Special revolver. Theseguns were also most often pre-ferred for home protection bythe citizenry at large. Although the newer semiau-tomatic pistols were finding favor, the revolversmade by two dominant manufacturers were verypopular as personal self-defense arms. Those twocompeting companies were Colt and Smith &Wesson. While similar in appearance, eachbrand’s products had distinguishing features. The1920s proved to be a turbulent decade, with pro-hibition in full force and organized crime becom-ing a real challenge for the police.

The two revolvers illustrated here were amongthe most common made by each firm to meet thelaw enforcement needs of the ‘20s. We’ll take anin-depth look at each and compare them.

With Smith & Wesson, its flagship revolver wasthe Military and Police, or M&P model. This was asix-shot revolver utilizing a medium-size frame, invarious barrel lengths. Colt’s most popular offeringwas the Police Positive Special, alsoa six-shot revolver on a slightlybeefed up smaller frame. Coltalso offered a variety of barrellengths at the time. For eachbrand, the hands-downfavorite caliber for lawenforcement was the .38 Special.

Representative specimens of each revolver arecompared here. Both of them have six-inch barrels,and both are .38 Special firearms. Here are theircomparative specifications.

The S&W M&P featured here was manufacturedin 1923. It’s known now to collectors as the Modelof 1905, fourth change. It weighs one pound and15 ounces, and measures almost exactly 11 inchesfrom muzzle to butt heel. The Colt Police PositiveSpecial came from the factory in 1922. It’s fromwhat collectors now call the first series. It’s a bitlighter than the Smith at one pound and eightounces; its length is somewhat shorter at 10.5 inch-es. The grip and the frame of the Smith are some-what beefier than on the Colt, and the barrel is a bitthicker in diameter. Both are equipped with check-ered wooden grip panels. The Colt standard at thetime was checkered rubber for the grips, but thisone had the upgraded wood examples. Both gunshave square, rather than rounded grip frames, astyle much preferred by law officers of the day.

The cylinder release pushes forward on theSmith, while the Colt must be thumbed rearward.The Colt cylinder rotates clockwise when viewedfrom the rear. The hand, which pushes the cylinderaround, is located on the left side and tends toforce the cylinder into the frame. The Smith cylin-

der rotates counterclockwise, and the action of thehand, located on the right side, tends to push thecylinder out of the frame. The Smith “K frame”action was introduced in its first form in 1896; the“D frame” Colt Police Positive action in 1907. Bothactions in the 1920s provided internal safeties toprevent the hammer going all the way forward untilthe trigger was pulled completely to the rear. TheS&W system was improved in the 1940s, while theColt system continued on into the 1980s.

The Smith has a three-point lockup for the cylin-der. From rear to front, these are the center pin pro-truding into the rear surface of the frame’s cylinderwindow, the cylinder stop clicking into a slot in thecircumference of the cylinder, and a locking bolt inthe barrel lug fitting into a hole in the tip of theejector rod. The Colt has no barrel lug, and thus hasonly a two-point lockup; a hefty projection on thecylinder release fitting into a hole in the middle ofthe ejector star, and the cylinder stop fitting into acylinder slot. The Colt two-step hand continues topress against the cylinder ratchet at the moment offiring, however, making for a tight lockup at thatmoment. In contrast, the single-step Smith handslides off the ratchet at that point, and a small bit ofcylinder wobble will always be present at the pointof firing. Whether or not this makes a practical dif-

44 CLASSIC FIREARMS: Colt Versus Smith & Wesson in the 1920s

“Both guns had a lotgoing for them. The Colt would

certainly feel lighter ina holster, while theSmith seemed more robust and handled morepositively, with marginally better sights.”

ference inaccuracy isdebatable.

The extractor rods aredifferent. The one on the Smith ishollow to accommodate the center pin’smovement when the cylinder is released,and as mentioned, it’s latched by a bolt in thebarrel lug. The Colt’s extractor rod is solid, andas no barrel lug is present it’s just “out there”unsecured by anything in front of the frame. TheSmith’s internal springs are a mixture dominated bycoil springs, while the Colt uses mostly more com-plex leaf springs. The removable sideplate of theColt is on the left side, while on the Smith & Wes-son, it’s on the right. Famed exhibition shooter EdMcGivern preferred the Smith action to that of theColt for smoothness. The Colt system is trickier towork on, so the Smith internals are much preferred

by gunsmiths who are faced with working on both.In my subjective opinion, the double-action triggerpulls are about equal in poundage, with a slightedge to the Colt with a bit lighter pull. The Coltaction can be “staged” easier than the Smith,

pulling back with a double-action pull to thepoint where the cylinder locks, and then com-pleting the pull to fire it. This technique is not,by the way, recommended by the experts,but bears mentioning. The single-action

letoffs weighed 6-1/4 pounds for the Colt,and 5 pounds for the Smith.

The sights on these guns are practi-cally identical, with a groove in the

top strap for the rear sight, and ahalf-moon style front sight. A

slight edge in visibility goes tothe Smith, as the rear sightgroove is squared off ratherthan “U” shaped, and thefront sight is slightly thicker.Fit and finish on both gunsis comparable, with a slightedge to the Smith for itslustrous bluing. TheSmith’s larger grip ismore hand filling.

I won’t address accura-cy here; there are too many factors to considerwhich impact on this quality. Literature from theperiod showed both guns to be on a par witheach other in this department. As far as handlingis concerned, I much prefer the beefier Smith &Wesson; the Colt seems almost too diminutive

to stand up to rough usage, although in prac-tice it certainly did.

Which would I choose if I were apolice chief in the 1920s? In retrospect,both guns had a lot going for them. TheColt would certainly feel lighter in aholster, while the Smith seemed morerobust and handled more positively,with marginally better sights. Myunit armorers would probably pre-fer the Smith to work on. I’d soon-er hit a thug over the head with aSmith than a Colt; a bent ejectorrod could disable that revolver abit easier. The U.S. Bureau ofInvestigation, forerunner to the

FBI (which was not organizeduntil 1934), used S&W M&Ps. In the final analysis,Colt pretty much gave up on the double-actionrevolver business by the 1990s, while Smith & Wes-son continues to march on with an impressive arrayof revolver choices to this day. However, both ofthe guns reviewed here were more than suitable forthat time in history, and each of them helped signif-icantly to make the 20s roar!

45

DP

CLASSIC FIREARMS: Colt Versus Smith & Wesson in the 1920s

“Both guns had a lotgoing for them. The Colt would

certainly feel lighter ina holster, while theSmith seemed more robust and handled morepositively, with marginally better sights.”

L. E. Wilson Case Gages, Deburring Tool.22-250 K75-12718 $36.00.243 K75-12828 36.00.25-06 K75-11760 36.00.270 K75-11828 36.006.8 SPC K75-19522 36.00.30 Carbine (Case Length Only) K75-18784 36.00.30-30 K75-12924 36.007.62 x 39 K75-14901 36.007mm Mag. K75-12336 46.00.300 AAC Blackout K75-19515 36.00.300 Win. Mag. K75-11752 46.00.300 WSM K75-18709 36.00.357 SIG K75-18708 36.00.38-40 Winchester K75-10682 36.00.44-40 Winchester K75-10697 36.00.50 Browning MG K75-14447 60.00Deburring Tool K75-16038 $20.00

Speed up the round-checking process

when you’re gettingready for a match! EGW usesactual Clymer chamber reamersto produce its chamber checkers.Pistol Chamber Checker 9mm K75-19846 $19.95.38 Super K75-19847 19.95.40 S&W K75-19848 19.95.45 ACP K75-19849 19.95

Cowboy Chamber Checker(.357 Mag.,.44 Mag., .44-40,.45 Colt) K75-25375 19.95AR-15/M-16 Chamber Checker .223 Rem K75-25377 29.955.56x45 K75-25376 29.95Shotgun Chamber Checker 12 Ga. K75-19523 49.9920 Ga. K75-19524 49.99

Evolution Gun Works Chamber Checkers


46

• .100 per revolution.• Covered track for longer caliper life –keeps chips out!• Made of hardened stainless steel.• Satin chrome finish. No glare.• Easily read to .001-inch on large,

adjustable dial.• Measuring faces hardened, ground

and lapped.K75-13462 $28.00

Stainless Steel Dial Caliper

HighTechDigitalCaliper

K75-17171 $39.95

Accurate,Easy to Read!

The SHELLSORTER is a simple product designed to reducethe time you spend sorting brass, allowing you to enjoy

more time reloading and shooting. The SHELLSORTER iscomprised of three pans designed to sort several commoncalibers. The fastest way to sort is to stack all three of thepans together on a common five-gallon bucket, yellowpan on top and black on the bottom; in that way, with afew shakes all your brass is sorted by caliber at the sametime. The SHELLSORTER is made of ABS, a strong plasticthat will give a lifetime of service.

K75-19972 $39.95

Pick up your brass the easy way! This takes the hardwork out of policing up your brass. No more aching

back from bending over or kneeling at the range!K75-21894 $44.95

SAVE YOUR BRASS!

Nobody’s perfect. A bullet pullermakes it easy to recover all your

components.Bullet Puller K75-17999 $29.95Puller Cap K75-17948 4.95Collet Set K75-17947 5.99

Bullet Puller

This replacesthe grips on

S&W J-Frameround buttrevolvers.A hook onthe rightgrip panelfunctionsas stop-ping pointfor therevolver when tucked into your waistband.

K75-19371 $29.99

47

Dillon’s “Plan B” Day Planner Holster holds a handgunand a spare magazine or pepper spray, yet it fits in with

business clothing and won’t draw undue attention. It lookslike a typical day planner, but inside there’s a holster that’sadaptable for either right- or left-hand draw. It fits most.380, 9mm, .40 and .45 caliber autos, including: Beretta,Colt, GLOCK, HK, Kahr, Kel-Tec, Ruger, Taurus, SIG, andSmith & Wesson. Will also hold small-frame revolvers withtwo- to four-inch barrels. “Plan B” Day Planner K75-10252 $24.95

$4500

K75-18193

Concealed Carry Tote

Dillon’s Concealed Carry Tote accommodates all the toolsyou need to survive the urban jungle!

This low-profile carry case looks like a mild-mannered-computer-nerd accessory, but it’s designed for your pistol aswell as your PC! Made of rugged fabric, with heavy dutyzippers on all three main compartments – one designed tohold a laptop computer, one for folders and paperwork,and one in the middle for a handgun.

Inside the case are pockets and pouches that will holdspare magazines as well as folding knives, letter openers,flashlights, cell phones, full-sized 8.5” x 11” paper notepads, etc. Measures 13.5” x 11.5” x 6.5” deep.

‘Plan B’ Day Planner

Front view with flap.

TUFF PRODUCTS MAG POUCHES

Front view without flap. Rear shows loops and Molle fasteners.

Tuff Products Magazine Pouches are the most versatile we’ve everseen. They can be worn on a belt or attached to anything that has

a MOLLE fastener system; for instance, the Dillon Range Bag, a tacti-cal vest or body armor carrier. Available in black or coyote brown.

Black 8-Magazine Single-Stack (1911) K75-19854 $39.95Brown 8-Magazine Single-Stack (1911) K75-19855 39.95Black 5-Mag. Double-Stack (9/.40 GLOCK) K75-19856 39.95Brown 5-Mag. Double-Stack (9/.40 GLOCK) K75-19857 39.95

THE STINGER:Comtech’s

own per-sonaldefensedevice. Designedto act as a “force multipli-er,” it’s like having the punching power of akarate master – instantly! There’s really noth-ing like it for easy carry and access.It passesun-noticed by 90 percent of people who seeit. Yup, just another “keychain device” tomost, and yet it works so well when needed.You deserve a Stinger today!

K75-19495 $9.95

Comtech’sSTINGER


DeSantisClip-Grip®

Baschieri & Pellagri12 Ga. Target SlugBaschieri & Pellagri12 Ga. Target Slug

K75-19214 $21.00

Reduced recoil, 1200 fps25 per box

48

By Robin Taylor, www.taylorfreelance.comPhotos by Lynne Green, www.GreenGirlPhotos.com

“We shouldn’t have to say it like this, butHaley Dunn handles a shotgun like a guy,” saysveteran shotgunner Mark Weeks.

That’s putting it mildly.Dunn’s near-flawless performances remind me of

the old air defense artillery slogan “if it flies it dies.”“Normally there’s a 10-target difference

between the guys and the girls,” Weeks continued,but when it comes to Haley Dunn, that’s just notthe case.

Weeks and Dunn shot on the USA ShootingNational team together for roughly 10 years,becoming “alternate” athletes for the 2004 and2008 Olympic games. Haley started in sportingclays as a pre-teen, then began a long love affairwith skeet that wowed the world at age 15.She’s in her 20s now, and Iowa’s young lionesswill soon join 60 professional shotgunners onNBC Sports. Together they’re launching thebrand-new Professional Sporting Clays Associa-tion (PSCA) – the first true “professional” leaguefor shotgun sports.

Practical WingshooterFor the other seven women that qualified for

the pro tour, Dunn’s appearance must be a littledaunting. Dunn’s an all-around competitor, honedby Olympic skeet coaches on one side, and adeep history in sporting clays on the other.

Sporting clays (like USPSA or IDPA) doesn’thave a fixed course of fire. Targets come fromevery possible angle. Targets fly over from behind,bound straight up, cross at 70 miles per hour, evenroll along the ground.

“Challenging” seems too soft a word. In trapand skeet, shooters break practically every target,so they count misses instead. In “sporting,” shoot-ers talk about how many targets they broke.

Haley got the sporting bug when her dadopened a sporting clays range when she was 10.Haley started shooting a 20-gauge Beretta Onyx,but “if I wanted to shoot I had to load my ownammo,” she says, then laughs. “I ran our little MECpress A LOT.”

Competitive shotgun asks you to stand side-by-side with the person who’s trying to beat you andwatch each other attempt each target. Sounds sim-ple, but the psychology is different than typicalrifle or pistol events where everyone shoots atonce. Sporting clays in particular pairs you with asmall group and you walk the course together. Put$5,000 or a shot at an Olympic medal on the lineat a shotgun shoot, and emotions get pretty tight.After years of that sort of pressure, Dunn’s mentalgame is ironclad.

“She’s very even-keeled,” says Russ Arnold,ACUI’s head administrator for internationalshotgun at colleges across the United States. “If

she’s having a good run versus a bad run, it’shard to tell.”

Between rounds Haley is “daddy’s little girlfrom Iowa,” according to Weeks. Arnolddescribes his former top star as “unassuming,very laid-back.” She plays cards and socializeswaiting for her round to start, then she’ll wanderoff a few minutes before the round starts to “gether head right.”

When she returns (says Weeks) Haley becomesthe ice queen.

“She’s fierce,” he marveled.That intensity flows from years at the top. It’s

something she switches on or off as needed. Haleywon the first major she ever shot at just 14. Shestarted shooting sporting clays events around theUnited States that same year.

“We didn’t even know that shooting was anOlympic event at that point. All we knew wassporting clays,” says Haley.

Start of a LegendHaley’s Olympic career began like a Holly-

wood movie. A chance meeting between herfather and Olympic shotgun coach Lloyd Wood-house at SHOT Show got Haley an invitation tothe Olympic Training Center in Colorado Springs.She’d been invited to compete for a spot on thejunior international skeet team. But…

“I didn’t have a clue how to shoot InternationalSkeet,” says Haley.

Succeeding as a “walk-on” at a JuniorOlympic qualifier…just doesn’t happen. Interna-tional Skeet is too specialized – but Woodhousefelt she had potential and asked her to come outa week early, promising to show her the ropes. Ifshe showed promise, she might qualify for theteam in a year or two. Dad drove her out to Col-orado, dropped her off, and Woodhouse spentmornings training her.

Woodhouse hit the jackpot. She wasn’t just“good” – she was spectacular. Having not shotInternational Skeet until a week before the camp,she shot 50 straight in practice, and placed secondin the Junior Olympic qualifier. The family drovehome and chatted about the possibilities. ThenCoach Woodhouse called, asking if Haley wouldbe interested in representing the United States inCairo, Egypt.

Remember, Haley is just turning 15, havingshot international skeet for the first time a monthago. I can just imagine Haley’s father respondingwith “Wait, did you say, Egypt?”

She’d have to shoot some more qualifierevents, but the chance was real.

Haley went on to win the Junior category inskeet in Cairo that year, and again in Suhl, Ger-many.

“That was 2001, and I’ve been doing it eversince.”

HALEY DUNN: THE LIONESS RETURNS

DP

49

The GunWhere pistol shooters cycle through different

firearms depending on what they need that day,shotgun shooters stick with one basic gun. Each isfitted to the shooter like a suit of clothes, and willstay with them for years. Haley’s Beretta DT-11shrugs off international travel while burning2,000-plus shells per month. Fitted to her by JimGreenwood at Greenwood Custom Stocks, itburns a steady diet of 24-gram No. 9s for skeet,and Bornaghi 1-ounce 7.5s for sporting clays(imported by Able Ammo).

Goin’ ProShooting as a

pro isn’t like play-ing professionalball. A select fewcan gather enoughsponsorship toshoot and travelprofitably, butpractically every-body has a dayjob. “With ammoat $90 a flat, andtarget fees running$50 a round,” saysHaley, stayingcompetitive takesmoney. She’s beenable to qualify forthe Olympicdevelopment teamconsistently, andthe team supplies40 cases (“flats”)of ammo to all theteam members.Unfortunately, sheactually needsabout 100 cases toget through theyear. (That’s25,000 shells.)

Dunn shot forthe University ofMissouri-Colum-bia (“Mizzou”) on a partial shooting scholarship,then moved into the guesthouse at a private rangein Texas in 2008. There she trained for theOlympics and taught shotgun lessons to get by.She hunts a little, plays golf rarely, and untilrecently has always driven a truck. Her one con-stant has been shotguns.

Haley spent six years in that guesthouse, train-ing and meeting shooters from all over the world.She helped codify the Carlisle Triangle method ina book, which led to a series of training seminars.In 2011 she joined forces with her old Olympic

teammate Weeks and renowned coach DanCarlisle to form the Gold Medal Shooting Acade-my – as their chief instructor. That put a huge drainon her time, and since Kim Rhode had the onlyavailable slot to the Olympics sewn up, she turnedher attention to sporting clays.

I caught up with Haley just after she’d movedfrom Houston to Dallas to be closer to the GMSAoffice. On top of teaching and shooting as a proherself, she’s taken on the role of “athlete liaison”for the PSCA – which for now is almost totallyTexas-based. (Texas is to Sporting Clays what Ari-

zona is to practicalpistol – many ofthe best in theworld live here,and the clubs areamazing.)

The PSCA willpay out $100,000in prize money atevery event, bring-ing the dream ofshooting profes-sionally into focus.But, you’ve got tobeat the halfwaymark to get paid. IfHaley finishesfourth (out of eightwomen) she’ll take$1,000. If shewins, she’ll take$5,000. The menface a similar cut-off: 26th pays$1,000, but firstpays $15,000. Prime Time forShotgun

Clay targetshooters every-where are talkingabout PSCA, butanother chanceevent may alterHaley’s path. For

the last 12 years, the United States could sendonly one woman to represent them in Internation-al Skeet. The day before I wrote this, the U.S.Olympic team announced they would send TWOwomen for international skeet. Having playedback up to Kim Rhode for at least 8 of those 12years, Haley’s the obvious favorite to shoot as theNo. 2 at Rio de Janeiro in 2016. She’ll be shooting“sporting” on national TV, then competing for thatcoveted Olympic berth.

Look for her and the PSCA on NBC starting July27, at 10:30 p.m. Eastern.

HALEY DUNN: THE LIONESS RETURNS

E. 50 BMG PRIMER POCKET SWAGERMakes it easy to remove the military crimp.

K75-50001, $299.95

E.(1) PRIMING CONVERSIONConverts Swager to Priming System.

K75-50003, $76.95

F. 50 BMG PRIMING SYSTEMAllows off-the-machine primer seating.

K75-50002, $299.95

F. (1) SWAGER CONVERSIONConverts Priming Systemto Swager.

K75-50004, $76.95

STANDARD FEATURES:• 4-Station Interchangeable Toolhead• Uses Std. 1-1/2”-12 UNF Thread Dies• Manual Shellplate indexing• Average Loading Rate: 300 Rds./Hr.• Loads High Volume/Match-Grade Ammo• Milspec/Match-Grade Priming System• Ductile Iron/Carbon Steel Construction

All for ONLY...$101995

K75-50000

“Big Fifty Reloader”“Big Fifty Reloader”


.50 BMG Carbide Size Die K75-50075 $869.95

.50 BMG Case Trimmer K75-50050 $384.95BFR Mounting Post (50.5” High) K75-50150 $269.95BFR Mounting Hardware Kit K75-50140 $9.95

C. 50 BMG POWDERMEASURE ADAPTERFor use with the RCBS .50BMG powder measure.

K75-50125, $76.95

D. 50 BMG PRIMER SEATING DIEOne of these is included with Dillon’sBig Fifty Reloader, but may be used as anaccessory on a separate toolhead. Theprimer seating die is adjustable forenhanced control of primer seating.Includes two primer punches: one flat,match-style primer punch and onecupped, milspec primer punch.

K75-50200, $149.95

A. 50 BMG CASE TRIMMERASSEMBLYFeatures an industry standard1-1/2”-12 UNF threaded body,a 1/4 HP motor, replaceablecarbide cutter, quick-discon-nect cord and includes the .50BMG trim die.

K75-50050, $384.95

B. 50 BMG CARBIDE SIZE DIEThe only .50 BMG size die in the indus-try that’s a full-length solid carbide sizedie, for increased die life and scratchresistance. It also has a solid carbideexpander ball, placed in the middle ofthe power stroke for easier operation.The die body is standard 1-1/2”-12 UNFthread, and is manufactured to lowchamber tolerance specifications.

K75-50075, $869.95

BFR Accessories

RCBS LOADING ACCESSORIES THAT CAN BEUSED WITH DILLON’S BIG FIFTY RELOADER.50 BMG Manual Powder Measure K75-21896, $114.95.50 BMG Seat/Crimp Die K75-21895, $139.95

A.

B.

C.

D.

E./F.

EXTRA “BFR” TOOLHEADS K75-19831, $179.95

5050

These 532 gram DESI®PAK desiccants absorb moisture better than sili-ca gel. It’s an industrial grade material that exceeds the requirements

of Mil Spec MIL-D-3464E. Now available in smaller packages for otherapplications (ammo cans, long-term storage containers, etc.).DESI®PAK (2 bags, 1 card) K75-21435 $16.954-ounce bag K75-14694 4.952-ounce bag K75-14695 2.95Humidity Indicator Card, 6 pack K75-21523 4.95

Thinking about burying some guns?

Dillon Bushing Wrench

K75-11049 $2.50

51

Dillon Precision, Long SleeveNavy, Large K75-18507 $19.95Navy, XL K75-18508 19.95Navy, XXL K75-18509 20.95Navy, XXXL K75-18510 22.95Gray, Large K75-18523 19.95Gray, XL K75-18524 19.95Gray, XXL K75-18525 20.95Gray, XXXL K75-18526 22.95Black, Large K75-18515 19.95Black, XL K75-18516 19.95Black, XXL K75-18517 20.95Black, XXXL K75-18518 22.95

Dillon Precision, Short SleeveNavy, L K75-18511 $12.50Navy, XL K75-18512 12.50Navy, XXL K75-18513 14.50Navy, XXXL K75-18514 14.50Gray, Large K75-18527 12.50Gray, XL K75-18528 12.50Gray, XXL K75-18529 14.50Gray, XXXL K75-18530 14.50Black, Large K75-18519 12.50Black, XL K75-18520 12.50Black, XXL K75-18521 14.50Black, XXXL K75-18522 14.50

The Dillon Deluxe Pistol Cleaning Kit

Dillon’s Deluxe Pistol Cleaning Kit includes: a DeweyNylon Coated Cleaning Rod; Dewey bronze bore

brushes in .22, .38, .40 and .45; a Dewey patch loop; aDewey Nylon Gun Parts Cleaning Brush; a 4 oz. spraybottle of M-Pro 7 Gun Cleaner; a 0.5 oz. bottle of SnakeOil; and a 4cc tube of Snake Oil Weapon Grease. Comespackaged in Dillon’s Large Utility Box.

K75-97066 $56.95

Sack-Ups Protective Gun SacksNEW! AR-15 Style Rifles K75-17378 $24.99Handgun, 13.5” Gray K75-17249 7.99Handgun, 13.5” Black K75-17250 7.99Handgun, 13.5” Natural K75-17252 7.99Shotgun, 42” Black K75-17253 10.99Rifle/Shotgun, 52” Gray K75-17247 8.99Rifle/Shotgun, 52” Black K75-17248 10.99Rifle/Shotgun, 52” Natural K75-17251 8.99Muzzleloader, 72” Gray K75-17254 11.99Shotgun Rcvr., 24” Gray K75-17257 8.99Shotgun Bbl., 36” Gray K75-17256 8.99Sack-Ups Old West Gun ProtectionSingle-Action Revolver K75-18000 $8.99Lever-Action Carbine 42” K75-18001 10.99Buffalo Rifle 48” K75-18003 10.99

SACK-UPS“SAFE SACKS” FOR YOUR GUNS

K75-11319 11.95

YOU Can Wear The “Dillon” Brand

An easy, affordable way to protect your favorite 1911’sframe from being battered by recoil.

Action Impact Reducers (6 ea.) K75-20516 $4.95

Dillon’s 1911Action Impact

Reducers

REDDINGReloading Dies & Accessories

REDDINGReloading Dies & Accessories

Trim Pro™ Case Trimmer Kit K75-15021 $119.95Includes: RCBS Trim Pro manual case trimmer, plus an assort-ment of shell holders and pilots for most popular calibers.Shell holders 2, 3, 4 and 10. Pilot calibers: 22, 24, 25, 27, 28,30, 35, 44 and 45.RCBS Scale Check WeightsStandard Set: 60.5 grains for powder charges. K75-12297 $34.95Deluxe Set: 510.5 grains for bullets, cases and powder. K75-12458 $49.95

Acharacteristic of virtually all progressive reloading ma-chines, regardless of brand, is that the dies are set rather

close together. When you are first setting up a “naked” ma-chine, there is plenty of wrench room, but if you have a needto adjust a die afterward, it often requires a delicate touch tomaneuver a lock ring on a crowded toolhead.

Dillon Precision has addressed this in two ways. We nowoffer new 1” die lock rings and a 1” Bench Wrench to fitthem. This combination gives much more room to re-adjustdies after they’re already mounted. The opposite end of ournew wrench is a 7/16” box-end for adjusting the Powder Barof any Dillon Powder Measure. Our new lock rings fit anystandard 7/8” x 14 dies.1” Dillon Die Lock Ring K75-14067 $1.355-Pack of Die Lock Rings K75-10669 4.151” Dillon Bench Wrench K75-10842 7.95

(Buy two or more 1” Bench Wrenches for $7.10 each)Wrench/Lock Ring 5-Pack K75-10668 9.95

Dillon’s New Bench WrenchFits new 1” die lock ringsRCBS EQUIPMENTRCBS EQUIPMENT

Micrometer-Adjustable Competition Seat-ing Dies (These are individual dies.)Competition Pistol Seating Dies9mm K75-10671 $89.95.38 Super Auto K75-10672 89.95.38 Special/.357 Mag. K75-10673 89.95.40 S&W/10mm K75-10674 89.95.44 Special/.44 Mag. K75-10675 89.95.45 ACP K75-10676 89.95.45 Colt/.454 Casull K75-10677 89.95Competition Rifle Seating Dies.45-70 Gov’t K75-11197 $89.95Complete Three-die sets – Size, bell, seat.32 ACP K75-15521 $59.95.32-20 Winchester K75-11906 55.95.38-40 Winchester K75-11838 74.95.38-55 Win./Ballard K75-19106 75.95.44-40 Winchester K75-11692 44.95.45-70 Gov’t K75-12700 59.95Complete Two-Die Sets .204 Ruger K75-12547 $52.95.22 Hornet K75-11484 43.95.220 Swift K75-12182 43.95.22-250 K75-15761 43.95.243 Winchester K75-15762 43.95.243 WSSM K75-11193 66.00.25-06 Remington K75-12183 42.95.25 WSSM K75-11194 66.00.260 Remington K75-09997 55.50.270 Winchester K75-10822 44.95

.270 WSM K75-18337 49.956.5 Grendel K75-19893 89.956.5 x 55mm Swedish K75-11353 42.956.8 SPC K75-12548 58.957 x 57mm Mauser K75-11212 39.957mm WSM K75-18339 59.957mm Rem. SA UM K75-18338 49.957mm Rem. Ultra Mag. K75-18340 49.957mm Rem. Mag. K75-11775 43.957mm-08 Remington K75-12041 42.957.5mm Swiss K75-09995 99.007.62 x 39mm Russian K75-12045 54.95.30-30 Winchester K75-29020 57.00.30-40 Krag K75-11835 59.957.62 x 54mm Russian K75-09994 76.50.300 AAC Blackout K75-12550 79.95.300 WSM K75-15763 49.95.300 Rem. SA UM K75-18341 59.95.300 Rem. Ultra Mag. K75-18342 49.95.300 Weatherby K75-11354 42.95.300 Win. Mag. K75-12046 39.95.303 British K75-11691 55.958 x 57mm Mauser K75-09996 55.50.338 Win. Mag. K75-11774 42.95.338 Lapua Mag. K75-21354 159.95Individual Dies: Neck-Size-Only Dies.223 Remington K75-10164 $32.00.22-250 K75-11184 32.00.243 Winchester K75-10172 32.00.25-06 K75-11336 32.95

.260 Remington K75-09993 37.80

.270 Winchester K75-11806 32.007mm Rem. Mag. K75-11392 32.00.308 Win./7.62 NATO K75-10165 32.00.30-06 K75-11763 32.00.300 Win. Mag. K75-11108 32.00Crimp Dies.30 Carbine K75-12892 $24.95.32 S&W/H&R Mag. K75-11747 29.95.45-70 Gov’t K75-11977 29.95Powder Measure, Reloading Accessories Match-Grade Model 3 BR Measure K75-10121 $174.95Large (7.5”) Powder Reservoir K75-10123 $9.50X-Large (10”) Powder Reservoir K75-10124 $12.50Powder Trickler K75-11986 $24.95Stuck Case Removal Kit K75-12186 $19.95Specialty/Custom Die Sets.30 Carbine K75-20625 $103.95(This .30 Carbine die set includes a DillonCarbide size die, a Redding seat die andRedding crimp die.).50 AE K75-14514 $49.95(Incl: RCBS steel size, expander, seat/crimp).500 S&W K75-11114 $49.95(Incl: RCBS steel size, expander, seat/crimp)RCBS Carbide .500 S&W Size Die only K75-19923 $36.95


52

The Tru-Weight Trigger Ten-sion Scale has a range fromeight ounces to eight pounds.A unique weight indicatorremains at the exact point oftrigger release, making it eas-ier to read your trigger pullpressure.

K75-14838 $26.95

This customdesigned 12” x

9” x 1-1/2” case ismade from durablesoft Nukaf and con-tains a 17-piece setof Grace USA GunCare Screwdrivers(8 ea.), Solid BrassPin Punches (8 ea.)and a specially fab-ricated 8 Oz. BrassHammer. Thescrewdrivers arehand-assembledand custom hollowground to fit scopescrews, plug screws, guard screws, etc. The handles areturned from quality Maine hardwood and protected witha smooth finish. Made in USA.

Grace USA Gun Care Tool Set K75-10680 $99.95

Ball-end set K75-13286 $12.95Gorilla Grip Sm. K75-16822 5.45Gorilla Grip Lg. K75-16823 6.35Gorilla Grip Set K75-22142 10.75

Bondhus Hex Key Sets

Grace USAGun Care Tool Set

Grace USA Gunsmith Hammerand Punch Sets8 oz. Brass Hammer

K75-14969 $14.9516 oz. Brass Hammer

K75-15069 $17.95Brass Punches (8-Pc.)

K75-14968 $31.95Steel Punches (7-Pc.)

K75-15070 $31.958 oz. Brass Hammer and 8-pc.Brass Punch Set

K75-21655 $39.95

The B-Square 32 Piece Gun-smith Screwdriver Kit con-tains 11 slotted bitsdesigned to eliminate screwhead damage, 8 hex bits, 3Phillips bits, 2 Posi-Drivebits, 2 Torx bits, 3 extra-longbits (1 each: Phillips, slotted,hex), and a 1/4” socket driveadapter. Get one for yourworkbench AND your rangebag! K75-18410 $29.95

Doc Allen’s Versatool fits eas-ily in your pocket and func-

tions as either a screwdriver or awrench. The Versatool includes11 tool bits and an extensionshaft with the loop handle. Theloop slides to three differentpositions to provide varyingdegrees of leverage to suit theneeds of the job at hand.

K75-15757 $12.95

DOC ALLEN’S VERSATOOL

53


Apex Tactical Specialties Armorer’s Block

Apex Tactical Specialties’ Armorers Block is designedfor S&W Semi Auto M&P Pistols in all calibers, sizes

and configurations, including thumb-safety models andthe M&P Shield; also for GLOCK® semiauto pistols in allsizes and calibers. The Armorer’s Block supports a pistolfor armory work and detail disassembly. Its pre-positionedbosses, slots and holes remove pressure from criticalfunction surfaces while pins are driven in and out. High-density polymer construction prevents marring of theframe while driving pins in and out. Made in USA.

Armorer’s Block K75-19536 $29.95

More Great Tools From Grace USA!

Grace USA’s 9-Piece Ball-End Allen HeadScrewdriver Set includes the following sizes:1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”,5/32”, 3/16”, and 3.5 mm. Each is con-structed of US 8650 Chromium-Vanadiumsteel alloy and is proudly Made in USA!Ball-End Allen Set K75-15063 $49.95

Grace USA’s 7-Piece Steel Roll Pin PunchSet includes the following sizes: 1/16”,5/64”, 3/32”, 1/8”, 5/32”, 3/16”, and 7/32”.Each is proudly Made in USA!Roll Pin Punch Set K75-15065 $39.95

About Grace USA: Grace USA gun careproducts are made with precision, and de-

signed specifically for gun enthusiasts who care about keeping their firearms in

prime condition. We are proud of our prod-ucts and look forward to providing you

with durable tools that fit your needs andguarantee satisfaction.

D•WIPE Towels ESCA TECH, INC.

D•LEAD Hand Soap ESCA TECH, INC.

Original D•LEADHand Soap

quickly cleans heavymetals as well aspaint dust and firingrange residue fromthe skin and finger-nails. Removes lead,nickel, cadmium, ar-senic, mercury, silver,zinc and most otherheavy metals.

8 Oz. Bottle K75-19915 $2.95

D•WIPE Towelswere specially

designed for immedi-ate clean up of mostcontaminants withoutwater. The soft 5.5”x8” towels are satu-rated with a uniquecleansing formulaand aloe vera, andwill remove heavymetals from skin andother surfaces. 40 Soft Towels K75-19916 $4.95

HARTMAN MFGTarget Stands

HARTMAN MFGTarget Stands

Rugged!Portable!

Easy-to-Use!Pistol Targets: 100 per packageNRA Paper D-1 “Tombstone” Target 23x35 K75-18388 $39.95IDPA Paper Practice Target 22x34 K75-15735 39.95USPSA/IPSC Paper Practice Target 22x35 K75-15836 39.9550 Foot TIMED/RAPID FIRE 10.5x12 K75-15832 7.95Competition 50 Foot SLOW FIRE 10.5x12 K75-15831 7.95Competition 25 Yard SLOW FIRE 10.5x12 K75-13096 8.50Police (Silhouette) 25 Yard 14x24 K75-13163 12.50Police (Silhouette) 25 Yard 22.5x35 K75-10094 27.50Competition 25 Yard RAPID FIRE 21x24 K75-12839 17.50Competition 50 Yard SLOW FIRE 21x24 K75-10041 17.50Police (Silhouette) 50 Yard 22.5x35 K75-10670 27.50Rifle Targets: 100 per packageSmall Bore Rifle 100 Yard 14x14 K75-12430 $7.50High Power 200 Yd. 21x24 (600 Yd. reduced) K75-12650 34.50Replacement Center 100 per packagePistol 25 Yard B8P Repair Center 10.5x10.5 K75-12676 $4.95200 Yard Rifle Repair Center 12.75x12.75 K75-15830 13.45Target PastersBlack, Self-Adhesive, 250 per roll K75-15835 $1.50Buff, Self-Adhesive, 250 per roll K75-15834 1.50Brown, Self-Adhesive, 250 per roll K75-16538 1.50White, Self-Adhesive, 250 per roll K75-15833 1.50Orange, Self-Adhesive, 250 per roll K75-16301 1.50

NRA P

istol and R

ifle Ta

rgets

One Target Stand K75-18237 $44.95A Pair of Stands K75-74493 79.95One Hostage Target Adapter (Shownabove in contrasting color for clarity.Works only with Hartman target stands.) K75-11697 22.95A Pair of Target Spikes (Inset) K75-11393 22.95

Gunslinger Spring KitsFrom Lee Fisher, one of the premier

“cowboy gunsmiths.” Colt & clones K75-20510 $26.95Ruger Blackhawk/Vaquero K75-20511 $24.95Marlin 94 K75-20512 $18.95Rossi/Navy Arms 92 lever guns K75-20513 $24.95Stoeger IGA shotgun K75-20514 $14.95

Peacemaker Specialists’ These wooden-handled screwdrivers

were designed to fit most SAA screws.SAA 2-Driver Set K75-15486 $19.95


54

• Weighted to simulate a fully loaded mag• 1911 practice mag works for all calibers• Mags for GLOCKs work in 9mm/.40 cal.• If necessary, fitting is easily done withany file

1911/Clones K75-16866 $14.95GLOCK 17, 22 K75-16872 14.95

Bennie Cooley’sSafety Magazines

Take out your frustrations, and buildyour grip strength at the same time!

Just think about…oh, socialized medi-cine, tax increases, high-capacity mag-azine bans, etc.

1 lb. K75-15532 $7.992 lb. K75-15533 $14.95

Note: These Come in Assorted Colors

TACCOM’s Enhanced Firing Pin forCiener/CMMG .22 Long Rifle AR-

15 caliber conversions is a direct-replacement firing pin, made from 17-4 SS heat treated to a condition H900,to present a tough, hard firing pin thatwon’t break or mushroom out aftermany firings. The tip has beendesigned to stick out of the hole only.030”, so you will not damage yourbarrel by dry firing your weapon.

K75-19538 $13.95

55


7.5” x 14” x 10”K75-14239 $14.95

itsabox!

You can become a master at usinga Mil Dot reticle with this ballistic

slide rule! Comes with a 24-pageinstruction manual.Mildot Master® K75-14762 $29.95

All Schuster Mfg. Inc. adjustablegas plugs are made in the U.S.A.

from hardened tool steel, Parkerizedand feature a lifetime factory warranty.By adjusting the volume of gas, youchange the speed of the op rod andthe barrel harmonics. If you’re work-ing up your own handloads, a quarterof a turn WILL affect your group size.Includes instructions and the adjust-ment tool (Allen wrench). M1A (Pictured) K75-15405 $45.00SOCOM M1A K75-15409 50.00M1 Garand K75-15408 32.00

MILDOT MASTER Schuster Mfg. Inc.Adjustable M1/M1A Gas Systems

Does your .22 Long Rifle insertmove back and forth in your AR

upper? The TACCOM Pressure Plugwill apply a constant pressure onyour insert, always keeping it in themost forward position when the rifleis in battery. You can install andremove the pressure plug in secondswith no tools.

K75-19533 $7.95

The TACCOM Extreme Extractor isa drop-in part for your

Ciener/CMMG .22 Long Rifle insertthat will give you consistant extrac-tion, which is KEY for a reliablefirearm. This will help with your live-round extraction, depending on howwell the factory has cut the chamber,and the type of chamber cut.

K75-19539 $10.95

TACCOM, LLC Accessories for .22 LR AR-15 Conversions

The De Santis Elastic Belly Band accommodates smallautos and revolvers with one reload and a pair of hand-

cuffs. Fastest when worn under an un-tucked shirt, but can beused with a tucked-in shirt for deep concealment.

24”- 28” waist K75-18557 30”- 34” waist K75-1855836”- 42” waist K75-18559 44”- 50” waist K75-18560

$5299

AR-15 Super ToolK75-19549 $24.95

TARGET

TACTICALSPORTS®

TUFFQuickStrips

$850(Pkg. of 2)

TUFF QuickStrips are available for an incredible variety ofrevolver calibers from .17 HM2 to .500 Linebaugh!

.22 LR-Magnum/.17HM2-HMR (10 rd.) K75-11737

.32/.327/9mm (8 rd.) K75-11738

.38/.357/.40/10mm (5 rd.) K75-11740

.38/.357/.40/10mm (6 rd.) K75-11741

.38/.357/.40/10mm (8 rd.) K75-11742

.41Mag./.45 ACP (6 rd.) K75-11748

.44 Sp.-Mag./.45 Colt/.460 S&W/.410 Shotshell (6 rd.) K75-11750

.45 Auto Rim (6 rd.) K75-11751

.475/.480/.500 S&W (5 rd.) K75-11755

Hogue Competition S&W Revolver Thumb Latch

fits K, L, and N-FramesStainless K75-19921 $59.95

56

(Hammer/Trigger Return Springs)Ruger GP-100 K75-11367 $10.50SP-101 K75-12598 9.50S&W J Frame K75-12189 9.00(Mainspring/Rebound Springs)S&W K,L,N (standard) K75-15073 $15.00S&W K,L,N (reduced power) K75-15072 15.00

W.C. Wolff Co. Revolver Springs

Pin-In Front Sight – $28.00 .250” high, red K75-18379.250” high, green K75-18380.300” high, red K75-18381.300” high, green K75-18382Pin-In Front Sight – $44.95.250” high, Gold Bead K75-18565.300” high, Gold Bead K75-18566

“Classic” Slip-In Sight – $35.00.250” high, red K75-18375.250” high, green K75-18376.300” high, red K75-18377.300” high, green K75-18378“Classic” Slip-In Sight – $44.95.250” high, Gold Bead K75-18567.300” high, Gold Bead K75-18568

Jerry MiculekCompetition

Grips$79.95

Hogue“BigButt”Grips$59.95

S&W N-Fr. Rd. Butt K75-11324N-Fr. Sq. Butt K75-11325K, L-Fr. Rd. Butt K75-11327K, L-Fr. Sq. Butt K75-11326

S&W N-Fr. Rd. Butt K75-12141 K, L-Fr. Rd. Butt K75-12140

SDMS&W RevolverFront Sights

B.

D.E.F.G.

A.

Tools from L. Bengtson Arms Co. for Smith & Wesson Revolvers

A. Rebound Spring Tool K75-30000 $22.00B. Ejector Rod Tool K75-25343 45.00

B.

California Competition Works’ Moon Clip Loading/Unloading Tools & Carriers

A. Demooner Tool K75-18169 $16.95B. MoonLoad/Unload 8-Shot .357 K75-19490 39.95C. MoonLoad/Unload 6-Shot .45 K75-19489 39.95(Will work with #16510 8-shot EDM .38/.357 moon clips on Pg. 57) D. 6-Shot Moon Clip Holder (2 ea.) K75-18173 17.90

E. Blued .45 ACP Moon Clips (10 ea.) K75-18183 9.80Not Pictured, Generic Stainless Steel .45 ACP Moon Clips (10 ea.) K75-18280 10.50F. 10mm Moon Clips (10 ea.) K75-18184 11.20G. 8-Shot .357 Moon Clips (10 ea.) K75-19228 19.95

North MountainSpeed Loader HolderThe North Mountain IDPA-Compliant Speed LoaderHolder is made specifi-cally for the competitiveIDPA revolver shooter.Lightweight at 2.9 Oz., itfirmly holds your competi-tion speed loader. It is fit-ted with a Tek-Lok™ tomount to your range belt.It fits Comp III and similar-sized speed loaders.

“K-Frame” ModelK75-21900 $35.00

“L-Frame” ModelK75-21914 $35.00

A.

C.

002 “Cup Challenge” $69.956” S&W K,L,N; Std. bbl. K75-17788 333 “Speedloader Holder” $34.95S&W K-Frame K75-12411 S&W L-Frame K75-13087 “Competition Speedloaders” $19.95S&W K-Frame K75-13224 S&W L-Frame K75-13117Revolver “Speedloaders” $11.95 S&W J-Frame (5-Shot) K75-12405S&W K-Frame K75-13104S&W L-Frame K75-13074“Speedloader” Holders $9.95 Sm./Med. Fr. K75-10340“Speedloader Loading Blocks” $24.95 S&W K-Frame K75-12262S&W L-Frame K75-12878

Safariland Competition Gear for Revolver Enthusiasts

I’ve tried several methods of holding my moon clips, and thisworks best for me! My hand only has to go to one place, so I no

longer grope around frantically for my reloads. – Mark PixlerFor 610/625, 7-Shot 686, 8-Shot 627 K75-21883 $130.00

Johnson Precision’s Mag Rack™ moon clip retention systemholds eight of your moon clips in place with strong magnets. The

Mag Rack may be permanently attached to a belt with includedfasteners, or temporarily with the optional belt loops.Mag Rack, 8-Shot 627 K75-25367 $149.95Mag Rack, 7-Shot 686 and 6-Shot 625 K75-25368 149.95Mini Mag Rack, 10-Shot 617 .22 LR K75-25386 74.95Accessory Belt Loops K75-25369 9.95

North MountainMoon Clip Holder

Johnson Precision Mag Rack Moon Clip Retention Systems

California Competition Works.22 LR Speedloader .22 LR Speedloader

California Competition Works’ 10-Round Speedloader for S&WModel 617 .22 LR Revolvers is ideal for Steel Challenge or

Ruger Rimfire Series competition. The speedloaders are machinedfrom 6061 T6 aluminum, then black anodized. The Loading Block(inset photo) is CNC machined from polymer and holds 120 roundsof .22 LR ready for insertion into speedloaders.CCW Model 617 Speedloader K75-12623 $34.95CCW .22 LR Loading Block/Case K75-12627 49.95

These .025 EDM

Stainless Moon

Clips are designed

to fit Remington

brass SNUGLY,

eliminating nasty

“cartridge flop”

when you reload.

Stainless EDM 8-Shot Moon ClipsStainless EDM 8-Shot Moon Clips

$5995

K75-16510Sold in Packages of 10

for 8-Shot S&W 627 Revolvers

57


Engages the slide lock and provides amechanical advantage making

slide removal easierand faster. Forthose with largefingers, smallfingers, tiredfingers, anyonelooking for a wayto simplify the removalof your GLOCK slide.K75-19527 $11.95

Lone Wolf Distributors’ Match-Grade Barrels for GLOCK Pistols

These replacement barrels are manufactured from the highestgrade mill-select 416 stainless forgings. Standard land-and-

groove rifling makes these an excellent choice if you wish to shootlead, plated or jacketed bullets. Can be used in factory ported orstock pistols. Ready to use, pre-fit drop in. No gunsmithing required. GLOCK 17 9mm Barrel K75-19167 $99.95GLOCK 19 9mm Barrel K75-19326 99.95GLOCK 20 10mm Barrel K75-19241 99.95GLOCK 20 .40 S&W Conversion Barrel K75-19805 99.95GLOCK 20 .357 SIG Conversion Barrel K75-19806 99.95

GLOCK 20 9x25 Dillon Conversion Barrel K75-19807 114.95GLOCK 21 .45 ACP Barrel K75-19242 99.95GLOCK 22 .40 S&W Barrel K75-11526 99.95GLOCK 22 9mm Conversion Barrel K75-11527 99.95GLOCK 22 .357 SIG Conversion Barrel K75-19808 99.95GLOCK 23 .40 S&W Barrel K75-19327 99.95GLOCK 23 9mm Conversion Barrel K75-19328 99.95GLOCK 34 9mm Barrel K75-19330 99.95GLOCK 35 .40 S&W Barrel K75-19329 99.95GLOCK 35 9mm Conversion Barrel K75-19331 99.95

A. B. C.

E. F. G.

GLOCK® Factory Original Parts:A. Extended Mag Release (Small Frame) K75-18569 $9.95B. Extended Slide Release K75-18570 19.95C. Striker Cups (The ones you always lose.) K75-19325 4.95D. Striker Channel Liner K75-18881 9.95

Lone Wolf Parts for GLOCK firearms:E. Extended Mag Release (Large Frame) K75-19115 4.99F. Extended Take-Down Lever K75-19114 9.95G. 3.5# Trigger Stop Connector K75-16501 14.95Extended Slide Stop K75-22299 15.99

Wolff Spring Co. Parts for GLOCK firearms: Competition Spring Set K75-11524 $9.95Trigger Return Spring 3-Pack K75-11818 7.99X-Tra Power Trigger Rtn. Spr. 3-Pk. K75-15558 7.99Guide Rod, GLOCK 17, 22, 31 K75-11356 24.95Guide Rod, GLOCK 19, 23 K75-11435 24.95Guide Rod, GLOCK 20, 21 K75-11352 24.95Recoil Spring, 12# K75-11420 7.99Recoil Spring, 14# K75-11418 7.99Recoil Spring, 15# K75-11419 7.99

Performance Parts for Your GLOCK® Firearm

D.

58

The 10-8 Performance Armorer Tool is a simple, non-marringtool useful for applications where prying or poking with metal

tools can easily damage your work. The rigid chisel-pointed endand semi-flexible flat blade end each have unique uses.

K75-15434 $7.95

10-8 Performance Armorer ToolSlide Removal ToolFits All GLOCK ModelsSTUL

Jentra Competition Guide Rod Kit

The Jentra Competition Guide Rod Kit for GLOCK Gen4 G-17/G-34 type slides features the largest diameter hardened

stainless steel guide rod for less muzzle rise. It has a non-captured

spring for faster and easier spring changes, and comes with a pre-mium quality Wolff (15 lb.) recoil spring.

K75-17106 $31.95

Grip extensions do not alter mag. capacity.GLOCK 26/27 K75-10346G29 (10 rd.)/30 (9 rd. opt. mag.) K75-10355G30 (10 rd. mag. only) K75-10356Kel-Tec P11/Taurus PT111 K75-18586Springfield XD (9mm/.40 only) K75-18587Springfield XD-S K75-15286 Mag. extensions add additional capacity.GLOCK 10mm/.45 ACP (+2) K75-18589GLOCK 9/.357/.40 (+2 or 1) K75-18588G27/33 (+1) K75-18590G36 (+1) K75-10650Beretta 92; Sig 228, 229; Browning Hi Power(+2) K75-18591

Installs in a snap and protects your GLOCK’sinternal parts from dust, dirt, rain, snow and lint.GLOCK Models 17, 19, 20, 21, 22, 23 (fit mayvary) K75-18161Model 21SF K75-19925Models 26, 27, 33 K75-10235Model 30 K75-106484th Generation GLOCKs K75-17087

PEARCEGRIP, INC. $995

$795

THEPLUG

Cleaning your GLOCK magazines hasnever been easier! GTUL has devel-

oped an integrated system to disassembleand clean all GLOCK magazines withoutmarring, gouging, or damaging the metalliner. Quickly removes dirt, dust, powderresidue and grime! Standard Mags K75-20910 $21.95Large Mags K75-20911 21.95

GTUL

Arredondo’s extended magazine basepad adds capacity to your magazines!

The Arredondo base pad comes with a newspring and an installation tool that also actsas a floorplate removal tool you’ll need todisassemble and clean your mags.Small-Frame GLOCK K75-19125 $39.95Large-Frame GLOCK (not for 29/30) K75-19124 39.95Base Pad & Spring Kit for Springfield XDs9mm/.40 (+3 or 2) K75-15568 $23.00XDM K75-15569 23.00.45 XD (+3) K75-15570 23.00Extended Mag Base Pads for S&W M&P9mm/.40 M&P K75-19103 $19.95Base Pad Kit with Spring for S&W M&P9mm/.40 M&P K75-19104 $23.00

TRUGLO’s Tritium/Fiber Optic T.F.0.BRITE•SITE Handgun Sights use a combi-

nation of Tritium and Fiber Optic technologies. Small-Frame GLOCK K75-18654Large-Frame GLOCK K75-18655Most Kimber Models K75-18656Springfield XD K75-11602Smith & Wesson M&P K75-18627

TRUGLO’s Fiber Optic BRITE•SITE Hand-gun Sights use traditional Fiber Optic

technology. Small-Frame GLOCK K75-18657Large-Frame GLOCK K75-18658Most Kimber Models K75-18659Springfield XD K75-11603Smith & Wesson M&P K75-18628

$9995

$4995

TRUGLO


Special PurchaseGLOCK® Mags

Just What’s Listed, While They Last!

G-22, 22 rd. (Pictured) K75-18886 $49.95G-19 K75-15806 39.95G-21 K75-15807 39.95

Barrel-Lite®

K75-10529$4.95

TARAN TACTICALINNOVATIONS

59

Sight Set, GLOCK® K75-15381 $84.99

Henning BATTLEHOOK

GLOCK 17, 19, 22, 23, 24, 26, 27, 33 K75-12031GLOCK 20, 21, 29, 30, 31, 32, 36 K75-12032

$94.95w/Fiber Optic Front Sight

60

Streamlight’s Nano Light® LEDflashlight is super bright (10

lumens), can be seen a mile away, ismade of virtually indestructiblemachined aluminum with ananodized finish, is weatherproof,nearly weightless and fits on yourkeychain or zipper pull tab!

K75-19942 $11.95

StreamlightStylus PROPenlight

Stylus Pro K75-18876 $29.95

Hogue Rubber AR/AK Pistol Grips (A.) AR-15s K75-14537 $34.95AKs K75-14538 34.95Hogue Rubber OverMolded® AK-47/74 Handguard Kits (K.) Standard Russian/Chinese Rifles K75-14556 $49.95Yugo-Version Rifles w/Longer Guard K75-14558 49.95Hogue eXtReMe seRies G-10 1911 Grips (B.) For guns w/S&A-style magwells K75-14562 $59.95Hogue Rubber Pistol Grips

(C.) Beretta 92 (Finger Grooves) K75-16660 $17.95(D.) Colt GM (Finger Grooves) K75-12803 17.95Ruger Mark II, RH K75-16664 17.95Hogue square Butt Monogrips Colt Python K75-12138 $17.95(E.) K, L-Frame Square Butt K75-12786 17.95N-Frame Square Butt K75-12145 17.95N-Frame Round Butt K75-18100 17.95Hogue Round Butt MonogripsRuger SP-101 K75-14833 $17.95S&W J-Frame Round Butt K75-12277 17.95K, L-Frame Round Butt K75-12549 17.95the Hogue HANDALL™ Grip sleeve fits many semi-autos.(F.) HandAll K75-14463 $8.95the Hogue HANDALL™ Hybrid Grip sleeve(G.) Ruger LCP .380 Auto K75-14477 $9.95(H.) Springfield XD 9mm/.40 K75-14478 9.95(I.) Smith & Wesson M&P 9mm/.40 K75-14479 9.95Hogue Bantam Boot Grips (J.) S&W J-Frame Round Butt K75-11054 $17.95K, L-Frame Round Butt K75-11055 17.95Hogue Hex Head 1911 Grip screws (Four-screw set).Blue K75-15723 $8.99Stainless K75-15722 8.99

A. B.

K.

C. D. E.

F. G. H. I. J.

Get a Grip With HogueGet a Grip With Hogue

The Larry™

8 LEDPocket

Work LightThe Larry™ 8 LED

Pocket Work Light isthe essential handymanlight. 8 powerful LEDsprovide 60 lumens ofbright white light. Therotating magnetic clipgives you convenienthands-free lighting. Thereinforced plastic bodydesign is shock-proofand water-resistant,making the Larry™ basi-cally indestructible. K75-15432 $9.99

A. S&W M&P Pistol Sear M&P 9/40 K75-21889 $41.95M&P 45 K75-21892 41.95B. S&W M&P Competition Spring Kit M&P 9/40 K75-21891 25.95C. S&W M&P Ultimate Striker Block Kit M&P 9/40 K75-21890 35.95D. S&W J-Frame Spring Kit K75-14309 25.95E. S&W Revolver Firing Pin K75-21888 15.95

Apex Tactical Specialties Parts for Smith & WessonsApex Tactical Specialties Parts for Smith & Wessons

D. Duty/Carry Spring Kit for S&W J-Frame Revolvers(w/frame-mounted firing pin)

E. S&W Revolver Frame-Mounted Firing Pin

A. S&W M&P Pistol Sear

A.

B. S&W M&P Competition Spring Kit C. S&W M&P Ultimate Striker Block Kit

PP oo ww dd ee rr RR ii vv ee rr PP rr ee cc ii ss ii oo nn ,, II nn cc ::PP ee rr ff ee cc tt ii nn gg YYoo uu rr XX DD // XX DD mm

Powder River Precision X-Treme Grips: CNC Laser Cut360º Grip Enhancement for your XD/XDm, made ofhigh-quality adhesive-backed traction tape.X-Treme Grips, XDm 45 (Sand) K75-15229 $16.95X-Treme Grips, XDm 9/40 (Sand) K75-15230 16.95X-Treme Grips, XD 45 (Sand) K75-15231 14.95X-Treme Grips, XD 9/40 (Sand) K75-15232 14.95Powder River Precision’s Drop-In Trigger Kits for Spring-field XD Pistols will give you a short, crisp trigger pullwith a fast reset and shorten the total trigger pull length.

XDm 9/40 Drop-In Trigger Kit K75-15226 $125.00XDm 45 Drop-In Trigger Kit K75-15236 125.00XD 9/40 Drop-In Trigger Kit K75-15228 125.00XD 45 Drop-In Trigger Kit K75-15227 125.00XD-S Trigger Spring Kit K75-15237 $14.95Powder River Precision’s Ergonomic Punch Set for theXD/XDm made of hardened 416 stainless steel withhard-molded rubber handles designed to fit comfortablyin the palm of your hand. XD/XDm Punch Set K75-15233 $30.00

TARAN TACTICAL INNOVATIONS

F.

C.

D. E.

B.

G.

A. Baseplate/Spring Kit, GLOCK® K75-15375 $39.99B. 11-Coil Spring, STI/SVI Mags. K75-15379 8.95C. Baseplate/Spring Kit, S&W M&P K75-15380 39.95D. Follower, STI Mags. K75-15377 9.95

E. Follower, SVI Mags. K75-15378 $9.95F. Short Baseplate, GLOCK® K75-15376 29.99G. 4mm Baseplate, STI/SVI Mags. K75-15382 32.95


61

62

By Brian Dervin Dillon Ph.D.If the sun never set on the British Empire, then,

as the Irish said, it also never set on its enemies.Several hundred Irish-Americans fought againstthe British in the Boer War of 1899-1902. Mostenlisted after New Year’s 1900, in the Transvaal,but my grandfather, W.T. Dillon, an early bird,joined an Orange Free State commando in Sep-tember 1899. He was encouraged to take a pokeat the English by his mentor, an old Irish rebel. Ser-geant Fitzpatrick haddeserted the BritishArmy at Khartoum,going over to side ofthe “fuzzy wuzzies.”After many adventureshe had made his wayto America and joinedthe California Volun-teer Heavy Artillery.The two friends hadfought together in thePhilippines for morethan a year. When Pri-vate Dillon’s enlistmentin the all-Irish Compa-ny A of the First Cali-fornia VolunteerInfantry Regiment wasup, he took ship forCapetown instead ofheading back intocivilian life in SanFrancisco. The battle-tested veteran went toSouth Africa not to getrich as a gold-seeker ordiamond miner, but to“pull the Lion’s tail,” tofight against the BritishEmpire, and strike ablow for Irish freedom.

Dillon and theBoers would be pittedagainst the most formi-dable army in theworld, with the proud-est tradition of militaryconquest. Most Britishcommanders and politicians believed that theirsoldiers would simply march up, flags flying, con-front the Boer rabble, and deliver a single volley,thereby terminating the conflict. Training was min-imal in the Boer armies, and there was no profes-sional officer corps. Many – if not most – unitssimply elected their officers. No Boers, not eventheir generals, apart from a single artillery detach-ment, even wore military uniforms. Arrogant

British officers were convinced that the Boerswould “not stand and fight like gentlemen” butmelt away, panicked by the smoke and noise ofthe very first British volley.

But in reality, by 1899, the vaunted Britisharmy was a hollow shell, composed of two kindsof sub-par troops: “garritroopers,” or “tin soldiers”skilled only in spit-and-polish barracks duty, andyoung, inexperienced, slum-dwelling draftees,completely unfamiliar with military life. Neither

group had much, ifany, expertise withfirearms beyondparade-ground drillingwith unloaded rifles.Most British soldiershad never seen, muchless shot, a rifle beforeputting on their uni-forms. And British reg-ulars typically spentmost of their time inceremonial activities,polishing their buttonsinstead of practicingon the rifle range. Con-sequently, most wereterrible shots, inca-pable of accurate fire.Incredibly, some offi-cers still trained theirmen to fire by volleyswithout aiming at indi-vidual targets. Withvolley fire, closingboth eyes while pullingthe trigger was, if notencouraged, then atleast tolerated. FewBritish soldiers couldhit targets at 100 yards;fewer still had everattempted shotsbeyond that distance.

The Boers, despitetheir lack of shiny but-tons, were outstandingrifle shots. And, theywere on their own

ground. Most Boers were farmers or ranchers, hadhunted large African game from childhood andkilled the big predators that menaced their live-stock. More importantly, the Boer tradition ofmarksmanship had been reinforced through con-stant fighting with neighboring African tribesmenfor many generations. The Boers were masters ofcover and concealment, learned from centuries ofhunting and warfare on the veldt. Using both

1899: GRANDPA DILLON PULLS THE LION’S TAIL

Figure 1: Members of a Boer commando during the initialphase of the Boer War, probably late 1899 or early 1900. The two young men in front are holding captured Britishrifles, either Lee Metford or Lee Enfield, while those in therear have Model 1896 Mausers. Most Boer civilians were

dead shots, with rifles and ammunition supplied them free bytheir government. The British soldiers they faced still

employed unaimed volley fire. Following his first tour in thePhilippines with the 1st California Volunteer Infantry,

William T. Dillon joined an Orange Free State Boer comman-do in South Africa. In late 1899 and early 1900 Dillon foughtwith the Boers against the British as an Irish-American volunteer. National Army Museum, Great Britain, photo.

63

while fighting against British garritroopers andinexperienced draftees would be nothing new forthem. Concealed Boer riflemen would not be dis-tracted by unaimed volleys over their heads, butinstead would concentrate on the real business ofwar, hitting the poorly trained and incompetentlyled English troops with aimed fire.

Even town-dwelling Boers were crack shots, formost belonged to shooting clubs, and practicedregularly with modern Mauser rifles. Every Boercity and town sponsored shooting competitions, atfirst informally, then, beginning in 1897, on a reg-ular, official basis. Ammunition was supplied freeof charge by the Transvaal and Orange Free Stategovernments. Competitions between the many dif-ferent shooting clubs contributed to a very highlevel of long-range accuracy on the part of Boermarksmen during the War. Boer civilian rifleranges had targets set out to 700 yards.

The Boer War of 1899 was the result of morethan three centuries of antagonism. The DutchEast India Company founded a tiny colony at thesouthern tip of Africa in 1652. The settlers calledthemselves Afrikaners. Their language, Afrikaans,was a mixture of Dutch with English, FrenchHuguenot, German and African-loan words. TheBritish conquered the Cape Colony in 1795, andthen put down a Dutch rebellion in 1815, thesame year as Waterloo. Five years later 4,000English settlers were sent to the Cape to over-whelm the troublesome Dutch by sheer numbers.From then onwards the Dutch South Africansconsidered themselves a separate people, “wan-dering pioneer farmers,” Trekboers or more sim-ply Boers, never more happy than when movingaway from their English neighbors and repressiveEnglish authorities.

In the 1830s thousands of Boers left the CapeColony a thousand miles behind, gaining, theythought, complete independence from Englishcontrol. Their new country was separated intotwo allied territories: the Transvaal to the north-east, and the much smaller Orange River zone tothe southwest. From the 1840s through the 1860sthe Boers fought a series of wars against theirBasuto neighbors to the east, and the Basutosometimes enlisted the English as allies. TheBritish created a second Colony, Natal, on SouthAfrica’s east coast in 1843, leaving the Boerslandlocked. To the north of the Boers Matabele-land was conquered by Cecil Rhodes, becoming,not coincidentally, Rhodesia. By the late 19thCentury the Boers were nearly surrounded byBritish colonies and possessions. The TransvaalBoers, resenting English interference, defeated asmall British army at the Battle of Majuba, justover the boundary in Natal, on February 27,1881. After Majuba, the British grudgingly

acknowledged the independence of the TransvaalBoers, but not that of what they now consideredthe Orange Free State.

Fourteen years later, Cecil Rhodes, now PrimeMinister of the Cape Colony, invaded the Trans-vaal, sending in his own private army of 500British South Africa Company “policemen” onDecember 29, 1895. He hoped to capture the richTransvaal gold fields west of Johannesburg, but theBoers shot the invaders with impunity from con-cealed positions. By January 2, 1896 the Britishwere completely surrounded by 6,000 irregulars,some of whom were still dressed in their NewYear’s celebration clothes. The British invaders sur-rendered after losing 65 killed and wounded, their500 new British rifles now becoming Boer guns.The Boers suffered exactly one casualty. War fevernow gripped all Boer communities. The tworepublics began buying as many of the most mod-ern arms they could get, mostly from Germany,and stockpiling as much ammunition as theycould in anticipation of the next, inevitable, con-flict with the hated British. 37,000 brand-newMauser bolt-action rifles arrived in the Transvaaland were distributed to every male Boer over theage of 16. Meanwhile the Orange Free Statemoved 1.5 million rounds of 7mm Mauser rifleammunition, again purchased from the Germans,on the British-owned and operated railroad to itsCapital at Bloemfontein.

Anti-British sentiment also inflamed Irishmen inSouth Africa, and around the world. On Septem-ber 13, 1899, over a hundred Irish and Irish-Amer-ican miners formed the first of two eventual Trans-vaal Irish Brigades. This was under the commandof Colonel John Blake, an Irish-American goldminer. Blake was a former U.S. Army officer, aWest Pointer and veteran of the Indian wars of theAmerican Southwest. Blake’s second-in-commandwas Major John MacBride, whose life would endin front of a British firing squad. Many of theirIrish-American enlistees had recent combat expe-rience in Cuba or the Philippines. No words wereminced in the First Irish Brigade’s Manifesto:

“England has been a vampire, and hasdrained Ireland’s life-blood for

centuries...Irishmen to the rescue!God save Ireland!”

On September 22, 1899, the British Govern-ment ordered the mobilization of an entire armycorps for South African service. This provocationtriggered the Boer mobilization in response, andon October 9th, an ultimatum was delivered tothe British. The Boer ultimatum expired on Octo-ber 11, and their armies began to deploy the verynext day. Since it would be some weeks ormonths before the main British Army could

1899: GRANDPA DILLON PULLS THE LION’S TAIL

arrive, the Boers knew that they were in arace against time. They had to strike before

being outnumbered by the many thousands ofBritish soldiers now in the pipeline, slowly mov-ing towards South Africa. Almost every male Boerbetween the age of 16 and 60 joined a comman-do, even boys as young as 12. Hundreds of for-eign volunteers also came to fight, from manyEuropean countries, and from America.

The biggest problem the Boers had with theinflux of foreign volunteers was elevating theirlevel of competence, then finding useful placesfor them. Virtually all European, and many Ameri-can, volunteers claimed to have been high-rank-ing officers, and demanded equivalent rank with-in the Boer forces. The Boers recognized mostsuch claims as fictitious, and refused to put for-eigners in charge of Boer troops. Foreign volun-teers with combat experience yet without delu-sions of grandeur,like W.T. Dillon,were welcomedwithout reservation.If they could makethemselves under-stood in Afrikaans,then they wereenrolled in Boercommandos, if not,they were placed inunits with theirown countrymen,serving under theirown officers. Theunpaid volunteerswere given rations,guns, ammunition,and horses. Onlyhalf of the Irish andIrish-American vol-unteers who foughtwith the Boers didso in all-Irish units,the other half, likeDillon, wereabsorbed into Boerunits as needed. In addition to the two IrishBrigades, and German, Dutch, Italian and otherforeign units, were John A. Hassell’s “AmericanScouts.” Hassell, an American prospector, wasbrave and would be wounded twice. His youngestsoldier was 13 years old.

Spanish-American War Veteran W.T. Dillonlanded at Capetown in September 1899. Sinceactual fighting had not yet begun, restrictions ontravel by foreigners through the Cape Colony tothe Boer Republics were not yet in force. Dillon’sjourney towards his second war, consequently,was unimpeded. Many years later, he told his foursons how beautiful a city Capetown was, and howmuch the grassy, rolling, South African veldtresembled coastal California. German-speakingWilliam T. Dillon could understand enoughAfrikaans to get by, so he joined the Nordfontein

Commando of the Orange Free State led by LukasSaas, Field Cornet.

All volunteers had to swear an oath. The oathdid not compel any transference of national loyal-ty from the volunteer’s home country, only a will-ingness to obey all orders issued by higher author-ity and to fight for the independence of the Boerrepublics. William T. Dillon took his oath on Sep-tember 24, 1899, and his second war began onOctober 14, 1899, when his commando rodenorth to Mafeking. The Boers quickly surroundedthe town, and then attacked Kimberley to thesouthwest. Both British towns were just over theCape Colony border, and both were poorlydefended. Colonel Robert Baden-Powell made anheroic stand inside besieged Mafeking for 217days with 600 Rhodesian soldiers and became –perhaps – the only untarnished British hero of theentire war. Irregular cavalryman W.T. Dillon

helped makeBaden-Powell thathero.

Most Boers wereconsummate horse-men. Their forceswere highly mobile,the commandosfighting either ascavalry or dis-mounted asinfantry, dependingupon the circum-stances. All traveledlight. The mountedBoer carried halfthe weight of theequivalent Britishcavalryman, whowas loaded downwith useless junk.The Boers knewwhere the waterholes were, had thesupport of the localpopulation, andlived off the land by

hunting. The British army, conversely, could onlyplod ponderously forward, dragging an immenselogistical tail behind it.

Dillon served during the time of greatest Boersuccess against the inept British forces, and usedhis Mauser when the opportunity presented itself.South Africa was, at the time, the only place inthe world where an Irish-American could notonly fight for Irish independence, but also killEnglishmen into the bargain with the approvaland assistance of the local government. ByDecember 1899, after three major Boer victoriesin a single week, the war was going entirely theirway. The Boer forces then stood at about 26,000men, including foreign volunteers. The earliestphase of the Boer War, from October to Decem-ber 1899, saw the highly mobile Boer mountedunits literally running rings around the British

64

Figure 2: South Africa at the outbreak of the Boer War. The twoBoer republics, the Orange Free State and the Transvaal, were sur-rounded on almost all sides by British colonies or possessions.William T. Dillon landed at Capetown and made his way to the

Orange Free State, where he enlisted in a Boer Commando in Sep-tember 1899. After fighting with the Boers for half a year, he leftvia Portuguese East Africa to rejoin the U.S. Army as a regular

artilleryman. Map by Rusty Van Rossmann and Brian Dervin Dillon.

forces, invading the neighboring British colonies,occupying or besieging British outposts andtowns, and scoring victory after victory. The earlyBoer successes, and their underdog status,earned them nearly universal American support.They had proven the Imperial British lion to be,in reality, just an ineffectual pussycat.

Because most Boer marksmen had spent yearshoning their shooting skills at long range, duringthe Boer war they considered shots of up to 500yards as almost routine. The Boers picked offexposed British infantrymen and artillerymenwith rifle fire, rendering their cannon useless. Atthe battle of Colenso on December 15, 1899,they captured no fewer than 10 British cannon.British field artillery was also rendered impotentby simply picking off, at long range, the horsespulling the guns, despite the average Boer’sgreater reservations over killing draft animalsthan the enemy soldiers. Boer marksmen did notusually target British officers over enlisted men,because, in the words of one historian, “theircourage was matched only by their stupidity.”Leaving the officers alive let them continue mak-ing tactical errors favoring the Boers. A Boermarksman made the most famous shot of theentire war, and one of the most incredible long-distance open-sight rifle shots of all time, duringthe siege of Ladysmith. From the prone position,his bolt-action Mauser supported on a rock, witha single bullet he dropped a British soldier, themiddle one of three standing side-by-side, atwhat was later measured as 1,400 yards.

During the second phase of the war, fromDecember 1899 to September 1900, the Britishcounterattacked in vastly superior numbers. Theyrecaptured most of their lost territory and invadedthe two Boer Republics, occupying all the largerBoer towns and cities. The third, final, andlongest phase, from September 1900 until May1902, was when the war sputtered along as skir-mishes between the “bitterenders,” the fewremaining Boer guerillas, and British cavalrywhile British garrisons held all the populationcenters. After New Years 1900, so many Britishtroops poured into the Cape Colony and Natalthat the Boers were outnumbered three or four toone. A few months later both Boer republicsceased to exist, and Boer men, women and chil-dren were herded into concentration camps,where thousands died of starvation.

Up to a quarter of the entire British army inSouth Africa was composed of Irish regiments, notcounting the Irish enlistees in nominally Englishunits. Many Irish conscripts were unhappy to beon what they considered the “wrong side.” Somedeserted, going over to the Boers. The Orange FreeState forces reached their greatest size, approxi-mately 12,000 soldiers, around the first of Novem-ber 1899. But three months after the new Britishoffensive began, by March of 1900, this body ofsoldiers had dwindled through death, desertion ordissatisfaction to around 8,000 men. William T.Dillon now saw the writing on the wall. After

fighting with the Boers for half a year, he leftSouth Africa via Portuguese East Africa, theBoers sole remaining “window on the world.” Dil-lon left to return to an earlier fight, back to Manilato re-enlist in the American Army. Already aninfantry and now a cavalry veteran, this time hewould try the Field Artillery.

In 1902, when the smoke had finally cleared,the three years of fighting was estimated to havecaused over 52,000 British casualties. More than20,000 were dead, a third killed in action, theremainder dead of disease. On the Boer side,more than 4,000 soldiers were K.I.A., whileanother 7,300+ died in British prisoner of warcamps. The most appalling figure to emerge fromthe war concerned civilians: more than 26,000Boer women and children died of disease or ofoutright starvation within the British concentra-tion camps. Although Black Africans did not fighton either side, an estimated 17,000+ died as adirect result of the war, killed while serving asnon-combatant laborers, starving to death insidebesieged towns, or executed out of hand by bothsides as suspected spies or for aiding and abet-ting the enemy.

If the Boer War of 1899-1902 has been forgot-ten by most Americans, we still remember a fewmen made famous by that conflict. Sir ArthurConan Doyle, creator of Sherlock Holmes, wasso appalled by the average British soldier’s miser-able Boer War marksmanship that he later helpedfound the British Federation of Rifle Clubs, ineffect, the English equivalent of the AmericanNational Rifle Association. Winston Churchill, thehalf-American war correspondent and escapedprisoner of the Boers, became a household name.The complete lack of field skills and preparationevinced by the average, slum-bred British soldierinspired Colonel Robert Baden-Powell to beginthe international Boy Scout movement, todaymore popular in the United States than its Englishbirthplace. Mohandas K. Gandhi became thehero of Indian Independence from Great Britainalmost a half-century after his service as a BoerWar stretcher bearer.

The Boer War was a crushing defeat for theBoers and their Irish volunteer allies. Some Irishdeserters from the British Army who had foughtwith the Boers managed to escape to America.Others, when caught, either in South Africa orback home in Ireland, were summarily executed.Many captured Irish-Americans were sent toBritish prison camps as far away as Ceylon. A fewIrish Boer War veterans continued their waragainst England, eventually fighting in the 1916Dublin Easter Rebellion. Major John MacBride,second-in-command of the Transvaal Irish Brigade,was one of the fifteen Irish patriots executed bythe British in May 1916, after their surrender.Finally, a few Irish-American volunteers like mygrandfather, W.T. Dillon, went back into the U.S.Army after fighting with the Boers. They were ven-erated as heroes for the rest of their lives by theirfellow Irishmen, both in and out of uniform.

65

DP


66

M-PRO7™ Gun Clean-er is odorless, non-

toxic and biodegradable.“Safely cleans rifles, hand-guns, shotguns…, blackpowder, corrosive primingdeposits and much more.”4 oz. K75-10139 $11.958 oz. K75-10138 18.9532 oz. K75-11298 40.95M-PRO7™ CopperRemover works up to fourtimes faster than ammo-nia-based cleaners and isodor free.4 oz. K75-19370 $11.95M-PRO7™ SyntheticGrease is specifically for-mulated to adhere, protect, andlubricate metal-on-metal sliding sur-faces.4 oz. K75-16180 $8.00

Microlon UltraBlue protects, penetratesand lubricates all surfaces. UltraBlue is

in use by the US Army Marksmanship Train-ing Unit, the US Army Pistol and Rifle Teamsand the US Marine Corps Pistol and RifleTeams. K75-75125 $9.95

Sweet’s Australian7.62 Solvent eas-

ily removes powderresidue and stub-born copperfouling. It’sharmless tosteel, a non-acid formulawith five percentammonia. If youshoot a rifle, youought to trycleaning it withSweet’s.K75-13128$12.95

Snake Oil is a deriva-tive of an FDA certi-

fied medical lubricantused in high-speed med-ical drills. •Provides a film thatseparates and protectsmoving parts, forsmoother operation andincreased efficiency.•Contains no evaporantsand has a film affinity inexcess of two years.•Reduces the collectionof dirt, dust and othercontaminants.•Performance in extreme conditionsis unparalleled.0.5 oz. Bottle K75-16035 $4.952 oz. Bottle K75-16508 8.95Grease, (2) 4cc Tubes K75-17073 4.950.5 oz. Oil, 4cc Grease K75-10059 5.95

J. Dewey Mfg. Co.Cleaning Patches

Bore Snake, the “World’s Fastest GunBore Cleaner”™ from Michaels of

Oregon is a better way to clean hand-guns, rifles and shotguns. Originally soldas a field tool, this product is popularwith gunsmiths and benchrest shootersas well. Try one and you’ll be hooked!.22 cal. Pistol K75-10426 $22.95.357/.38/9mm K75-10427 22.95.40 cal. Pistol K75-10428 22.95.44/.45 cal. Pistol K75-10429 22.95.22 cal. Rifle K75-10420 22.95.243 cal. Rifle K75-10421 22.95.270/7mm Rifle K75-10422 22.95.30 cal. Rifle K75-10423 22.95.357/.375 cal. Rifle K75-10424 22.95.410/.458 K75-10425 22.95.50/.54/28 Ga. K75-10432 22.9520 Ga. Shotgun K75-10431 23.9512 Ga. Shotgun K75-10430 23.9537/40mm Launcher K75-15465 46.95

Product is color-coded bycaliber. White shown herefor clarity only.

Packages of 1000.17 cal. (3/4” Sq.) K75-11807 $12.95.22-.24 (1-3/8” Sq.) K75-11808 14.95Packages of 500.24-.27 (1-3/4” Sq.) K75-11809 $11.95.30-.35 (2” Sq.) K75-11810 13.95Packages of 250.38-.45 (2-3/4” Sq.) K75-11811 $11.9512-16 ga. (3” Sq.) K75-11812 13.95

TW-25B is the choice of leadingfirearms manufacturers, armorers, pro

shooters and gun enthusiasts, and is rec-ognized as the world’s best all-purposeweapons lubricant/protectant. It is nowwidely specified by the U.S. military fortheir most critical performance weaponssystems. Environmentally safe, non-car-cinogenic, non-ozone-depleting. 0.5 Oz. Syringe K75-15732 $10.991.5 Ounces K75-15731 14.50

MIL-COMMExtreme Performance Lubricants

E-Z BriteWonder ClothOn gun dealers

shelves since1976, this product isstill a must for keep-ing stainless steeland nickel-finished revolvers look-ing like new. Demand the originallead and carbon wipe! E-Z Brite Cloth K75-18613 $6.99

KEEPYOURGUNS! (Clean)

Brian Enos’ Far Superior Slide-Glide is adual grease blend, with proprietary

extreme pressure compounds, which boostthe ability of the oils in the grease to with-stand extreme pressures. It gives the grease avery stringy, tenacious character that makesit stay where you put it.

Slide-Glide Standard is for use in warmweather (F60º+), Lite is a thinner viscosityfor lower temperatures (F30º+).Slide-Glide Standard K75-15571 $7.95Slide-Glide Lite K75-15572 7.95

FrogLube is a bio-basedcleaner, lubricant and

preservative (CLP) prod-uct. FrogLube Solvents aredesigned to quickly attacksurface fouling, baked-onor filmed residues andother metallic foulingsuch as lead and copper,while protecting firearmscoatings, paints, woodand other materials fromthe corrosive effects ofpetroleum-based, flam-mable and toxic weaponscare products.

4 Oz. PasteK75-15443 $10.99

4 Oz. LiquidK75-15444 $17.59

No s#!+, there I was…in my office,cleaning my 686 SSR when the

boss walks in with that “whisky-tango-foxtrot” look on his face. “Hi,” I said(thinking fast), “I’m trying out theseBore-tips before I write the Blue Presscopy for them. They work GREAT!”

The Bore-tips Swabs REALLY DOwork. What you can’t see under thefoam is a plastic jag sized for a tight borefit which provides for the uniform appli-

cation of solvents and oils. They workwith all standard 8-32 thread cleaningrods, and are tough and reuseable..22/5.56mm (6 ea.) K75-15310 $4.98.243/6mm (6 ea.) K75-15311 4.98.30/7.62mm (6 ea.) K75-15312 4.98.357/9mm (6 ea.) K75-15313 4.98.40/10mm (5 ea.) K75-15314 4.98.45 Caliber (5 ea.) K75-15315 4.9812 Gauge (3 ea.) K75-15325 8.9820 Gauge (3 ea.) K75-15326 8.98

DEWEY Nylon Coated Cleaning RodsAll Caliber Pistol 6" K75-15461 $19.95(.22-.26 Jag Adapter for All Caliber 6" rod)K75-19894 3.25(.27 & up Adapter for All Caliber 6" rod) K75-19895 3.25.22-.26 Caliber Pistol 12" K75-12985 21.45.17 Caliber Rifle 26” K75-11472 22.95.17 Caliber Rifle 36” K75-11473 25.95.22-.26 Caliber Rifle 36" K75-13084 23.45.22-.26 Caliber Rifle 44" K75-15462 23.45.27 Caliber and up Pistol 12" K75-13021 21.45.27 Caliber and up Rifle 36" K75-12991 23.45.27 Caliber and up Rifle 44" K75-15463 23.45.35 Caliber and up Rifle 36" K75-17096 29.95.35 Caliber and up Rifle 44" K75-17097 29.95Shotgun Rod (Uncoated Brass) K75-10473 19.952-pc Shotgun Rod K75-15464 29.95Brass Jags (Note: These jags ONLY fit Dewey Cleaning Rods!).22 Caliber Brass Jag K75-10026 $2.75.24 Caliber Brass Jag K75-10027 2.75.27 Caliber Brass Jag K75-10025 2.75.30 Caliber (and up) Brass Jag K75-10867 2.75.38 – .41 Cal. Brass Jag K75-10028 2.75.44 – .45 Cal. Brass Jag K75-10243 2.75Brass Patch LoopAccepts most pistol and rifle patches K75-10737 $2.25.17 Caliber Bore Brushes.17 Caliber Rifle/Nylon (ea.) K75-11475 $1.95.17 Caliber Rifle/Bronze (ea.) K75-11474 1.95Nylon Bore Brushes .22 Caliber Rifle (ea.) K75-16144 $1.30.243 Caliber Rifle (ea.) K75-16145 1.30.270 Caliber Rifle (ea.) K75-16146 1.30.30 Caliber Rifle (ea.) K75-16147 1.30.22 Caliber Pistol (ea.) K75-16302 1.30.38 Caliber Pistol (ea.) K75-16148 1.30.40 Caliber Pistol (ea.) K75-16149 1.30.45 Caliber Pistol (ea.) K75-16150 1.30Bronze Bore Brushes Each/$1.50 5 pack/$5.50 .22 Caliber Rifle K75-16278 K75-22089.25 Caliber Rifle K75-16293 K75-22094

.243 Caliber Rifle K75-16280 K75-22091

.270 Caliber Rifle K75-16274 K75-22085

.30 Caliber–7.62mm Rifle K75-16273 K75-22084

.35 Caliber Rifle K75-16281 K75-22092

.44–.45 Caliber Rifle K75-16279 K75-22090

.22 Caliber Pistol K75-16282 K75-22093

.38 Caliber –9mm Pistol K75-16275 K75-22086

.40–.41 Caliber –10mm Pistol K75-16276 K75-22087

.44–.45 Caliber Pistol K75-16277 K75-22088Cotton Mops .22–.27 Caliber (ea.) K75-17089 $1.45.30–.38 Caliber (ea.) K75-17090 1.45.400–.450 Caliber (ea.) K75-17091 1.4516, 12 & 10 Ga. Shotgun (ea.) K75-17094 1.60M-16/AR-15 Breech Rod Guide/Chamber Brush Breech Rod Guide K75-10149 $20.00AR-15 Chamber Cleaning Brush K75-11299 2.95Deluxe M-16/AR-15 Lug Recess Cleaning Kit Lug Recess Cleaning Kit K75-18533 $27.95

Includes: Chamber Cleaning Rod, Lug Recess Cleaning Head, Delrin Guide Sleeve, 50-pak Cotton Cleaning Rolls, Chamber Brush, Chamber Mop, Double-Ended

Nylon Cleaning Brush.Bolt Action Rifle Cleaning Rod GuidesAll models fit .695-.700 bolt diameter rifles..17-.222, .225, .22/250, .220 Swift K75-14196 $18.95.243 Caliber – 7mm K75-14197 18.95.30 Caliber K75-14198 18.95.338 Caliber K75-14199 18.95Muzzle Guards AR-15/M-16 K75-16875 $9.95M1-A/M-14 K75-16876 9.95M1 Garand K75-16878 9.95Ruger 10-22 Standard Bbl. K75-16877 9.95Ruger 10-22 Bull Barrel K75-16879 9.95Ruger Mini-14 K75-16880 9.95Brass Muzzle Guard, .30 Cal. K75-17245 9.95Nylon Gun Parts Cleaning BrushParts cleaning brush K75-16389 $2.25

Dewey’s AR-Link Cleaning Pinutilizes the rear take-down

pin in your AR-15 style rifle tohold the upper and lower receiversopen for cleaning. It fits AR-15sand AR-10s with take-down pinsup to .316” in diameter. To use, 1)Depress the rear take-down pin and pull out. 2) Pivot the upperand lower receivers apart. 3) Insert the pin on the AR-Link into theupper receiver take-down pin tab. 4) Close receivers with the AR-Link inserted into the lower receiver. 5) Push the take-down pinthrough the channel in the AR-Link to lock the upper and lowerreceivers into place. 6) Clean your rifle. 7) To remove AR-Link,reverse the above steps. K75-18599 $14.95

™

The drymate™ Gun Cleaning Pad protectsyour table and firearms from scratches

and spilled cleaning fluids. Machine wash-able, durable, stain resistant and long lasting.

Gun Cleaning Pad™ K75-11313 $19.95

drymate

67


Bore-tips™ Bore Cleaning Foam Swabs

J. Dewey Manufacturing Company

NEW! Elite Tactical Magazine HD +P – “TheETM Heavy Duty/+P rated.45 ACP maga-zines with exclusive stainless flatwire MAXmagazine spring and time-tested ETM tube.”(8 rd) .45ACP K75-18602 $44.95Elite Tactical Magazine – “The ETM startedwith a blank sheet of paper and 30-plusyears of 1911 and 1911-magazine experi-ence; designed from the ground up as a pre-mium tactical magazine.”ETM (8 rd) .45ACP K75-12027 $34.95ETM (10 rd) 9mm K75-19463 $34.95

Wilson Combat Magazines – “No other .45magazine on the market can compare forproven inherent reliability, durability and theability to remain fully loaded for long periodsof time without damage.” WIL-ROG Mag (8 rd) .45ACP K75-11714 $32.95Match Magazine (7 rd) .45ACP K75-10505 32.95Officers Match Mag. (7 rd) .45ACP K75-10506 32.95SHOK-BUFF® Recoil System – Includes a

One Piece Guide Rod and Plug; six SHOK-BUFF buffers; an Extra Power Firing PinSpring; an Extra Power Recoil Spring; and aReduced Power Recoil Spring. SHOK-BUFF System K75-18150 $37.05Wilson SHOK-BUFF® – A 1/10” thick polyfiber buffer between the frame and slidecontact areas. SHOK-BUFF Kit (2 buffers, 18.5# recoilspring) Gov’t Model K75-18148 $5.95SHOK-BUFF Buffer only (6 ea.) K75-18147 $6.95

Chip McCormick Corp’s“Shooting Star”

MagazinesDesigned to give the serious pis-tol shooter the advantage of extrashot capacity and improved per-formance. Floorplate drilled toaccept base pads..45 ACP SS Mag., 8-Rd.

K75-10311 $19.95.45 ACP SS Mag., 10-Rd.

K75-15025 $25.95

Wilson CombatWilson Combat

Wolff RECOIL SPRINGSBROWNING HI-POWER18.5 Pound K75-11373 $7.25COLT GOVERNMENT MODEL 9 Pound K75-11719 $7.2510 Pound K75-12193 7.2512 Pound K75-12007 7.2513 Pound K75-12443 7.2514 Pound K75-12338 7.2516 Pound (Standard) K75-11860 7.2517 Pound K75-12192 7.2518.5 Pound K75-12465 7.2520 Pound K75-12056 7.2523 Pound K75-11377 7.25COLT OFFICERS MODEL 24 Pound K75-12110 $7.25

CZ 75B 9 Pound K75-19348 $7.9810 Pound K75-19349 7.9811 Pound K75-19350 7.9812 Pound K75-19351 7.9813 Pound K75-19352 7.9814 Pound (Standard) K75-19353 7.98SMITH & WESSON M&P 12 Pound K75-19356 $7.9814 Pound K75-19357 7.9815 Pound K75-19358 7.9816 Pound (Standard) K75-19359 7.98SPRINGFIELD 5” 9/40 XD12 Pound K75-19339 $7.9813 Pound K75-19340 7.9814 Pound K75-19341 7.9815 Pound K75-19342 7.98

16 Pound K75-19343 7.9817 Pound (Standard) K75-19344 7.98SPRINGFIELD 5” 45 XD14 Pound K75-19345 $7.9816 Pound K75-19346 7.9818 Pound K75-19347 7.98SPRINGFIELD 4.5” 9/40 XDM14 Pound K75-19336 $7.9816 Pound K75-19337 7.9818 Pound (Standard) K75-19338 7.98Wolff GUIDE RODSSmith & Wesson M&P K75-19354 $24.95Springfield XDM 4.5 K75-19355 24.95Wolff HAMMER SPRINGS1911 K75-11511 $9.00Wolff MAG CATCH SPRINGS1911 K75-11791 $9.95

SPRINGFIELDMagazines

Springfield Factory XD & XDM Magazines16-Rd. XD 9mm K75-11586 $31.9512-Rd. XD .40 K75-11587 31.9513-Rd. XD/XDM .45 K75-11585 32.9519-Rd. XDM 9mm K75-15496 36.9516-Rd. XDM .40 K75-19971 36.955-Rd. XD-S .45 K75-15234 28.957-Rd. XD-S .45 K75-15235 39.95Two-Piece 1911 Recoil Spring Guide Rod –Machined from stainless steel, includes plugand Allen wrench. K75-15724 $24.95

WOLFF GUNSPRINGS


68

This Adjustable Target Pistol Sight is precision machined and fitsin a standard “Bomar slide cut.” Yeah, the services of a gun-

smith are required to cut the slide (unless your 1911 pistol alreadyhas a Bomar cut) but the results are worth it.Adjustable Pistol Sight K75-18210 $53.95

9mm 9-Rd. K75-27043$24.95

.38 Super 10-Rd. K75-27044$24.95

.40 S&W 9-Rd. K75-27046$24.95

10mm 9-Rd. K75-27045$24.95

.45 8-Rd. w/2 pads K75-27047$24.95

Base Padw/ScrewsK75-18045$2.50

.45 10-Rd.K75-27039$31.95

.45 8-Rd. Comp.K75-27049$24.95

Adjustable Target Sight for 1911s

CHECK-MATE 1911 Magazines

These two-piece flat checkered main-spring housings with bolt-on mag

wells are similar to the patented one-piece S&A design. The mag well andcheckered mainspring housing aremachined from solid bar stock steel andcan be used without the mag wellattached, although there will be a smalldovetail below (this does not impairfunction). This is a great replacement forplastic mainspring housings on full-sizeor commander model 1911s. Stainless K75-18600 $49.99

Blued K75-18601 49.99

Evolution Gun Works

69

Secure Firearm Products


Secure Firearms Products’ Universal SpringTester (left) will help you determine if the

recoil spring in your needs replacing, and you’llsave time and money by testing and organizingloose recoil springs in your shooting bag. The1911 Firing Pin Stop Tool (right) is used to safe-ly remove and replace the firing pin stop from1911-style slides. Recoil Spring Tester K75-15305 $33.99Firing Pin Stop Tool K75-15304 10.99

California Competition Works’ Magazine Storage Sleeves makeit easy to organize your pistol magazines. The optional I.D.

Tag/Hanger makes it less likely that you’ll show up at a match withthe WRONG magazines! Four-Magazine Storage Sleeve K75-19226 $14.95Six-Magazine Storage Sleeve K75-19227 17.95Magazine Sleeve I.D. Tag/Hanger K75-19476 1.95

1911 Armorer’s Tools

RobustSport &

Protection Sight,Volkmann 1911 forNovak Cut.K75-15385 $72.95

Henning BATTLEHOOK

UPLULA MAG LOADER

CHECK-MATE M14/M1A MagazinesCurrently Check-Mate Industries is the largest

M14/M1A magazine manufacturer for theUnited States Military. Check-Mate Industries is rec-ognized as being America’s number one manufac-turer of M14 magazines. We offer CMI M14/M1Amagazines in 5-, 20- and 25-round capacity. 5-round M14, Phosphate Finish

K75-27055 $22.0020-round M14, Polished-Stainless Finish

K75-27056 $28.0020-round M14, Phosphate Finish (NSN#: 1005-00-628-9048 Gov’t: 7790183)

K75-27057 $27.0025-round M14, Phosphate Finish (The same Mil-Spec magazines Check-Mate is now supplying tothe US Military.)

K75-27048 $35.95

ADCO SUPER THUMB® offers modelsfor popular centerfire pistols and 10/22

style magazines. ST1 is for 9mm and .40 caliber Beretta,Browning, Ruger, SIGARMS, S&W, etc. Inaddition, the ST1 has interior rails andgrooves to accommodate Colt Governmentmagazines. K75-18607 $7.95ST2 is for GLOCK and Para-Ordnance mag-azines. K75-18608 7.95ST3 handles virtually all centerfire, single-column magazines. K75-18609 7.95ST22 is for Ruger 10/22 rifles. K75-18610 7.95STJR is for Ruger, Browning, Colt and HighStandard .22 pistols. K75-18611 7.95

Beretta 92 18-rd. AFC* K75-18728 $25.95Beretta 92 20-rd. AFC* K75-18729 29.95Beretta 96 .40 15-rd. AFC* K75-14992 29.95Browning HP 15-rd. Blue K75-18730 25.95Browning HP 20-rd. Blue K75-18731 29.951911 11-rd. Blue K75-18732 24.95Para P-14 14-rd. Blue K75-18733 23.95Para P-16 15-rd. Blue K75-18734 23.95Para P-18 17-rd. Blue K75-18735 23.95Ruger P-Series 9mm 17-rd. Blue K75-18736 25.95Ruger P-Series 9mm 20-rd. Blue K75-18737 29.95S&W 59 17-rd. Blue K75-18738 25.95S&W 59 20-rd. Blue K75-18739 29.95SIG Sauer 226 18-rd. AFC* K75-18740 25.95SIG Sauer 226 .40 15-rd. AFC* K75-15020 29.95SIG Sauer 228 15-rd. Blue K75-18741 25.95Springfield XD (not XDM) 9mm 18-rd. K75-14988 23.99Springfield XD (not XDM) .40 13-rd. AFC* K75-14991 29.95Taurus 92-99 17-rd. Blue K75-18742 25.95Taurus 92-99 20-rd. Blue K75-18743 29.95CZ-75B 19-rd. AFC* K75-14989 29.95*AFC = Anti-Friction Coating

These magazines are American made and feature a life-time manufacturers-defect warranty from ProMag.

Polymer 32-rd. 9mm AR-15 K75-12638 $19.95Polymer 30-rd. Mini-14 K75-12631 19.95Polymer 30-rd. AK-47 (7.62) K75-12669 17.95Polymer 30-rd. AK (.223) K75-12674 17.95Polymer 30-rd. AK-74 (5.45) K75-12675 17.95Kel-Tec P-32 Pistol (.32 ACP) K75-12620 19.95

Mec-GarPistol Magazines

70

The UpLULA™ is a military quality per-sonal universal pistol magazine loader.

Loads virtually all 9mm, .357 SIG, .40S&W, 10mm and .45 single- and double-stack magazines.

K75-19239 $33.95

New Bulgarian AK Mag

New steel 30-round AK-47 magazinesfrom Bulgaria.

K75-12022 $24.95

ProMagProMag

71ElZettaTactical Flashlight MountsEvery Elzetta ZFH1500 Flashlight Mount for AR15 rifles

and ZSM Tactical Shotgun Flashlight Mount comes withsizing adapters, giving the mount the ability to accommo-date flashlights from 0.7 to 1.05 inches (18 to 27 mm) indiameter. This includes flashlights from popular manufac-turers such as InForce®, Streamlight®, Pelican®, Laser De-vices®, SureFire® and of course, the Elzetta® ZFL-M60.(Sizing Adapters are not required when using an ElzettaZFL-M60 or other 1-inch lights.) The Elzetta ZSM is madefrom the same advanced glass-filled polymer that hasproven itself in the popular Elzetta ZFH1500.

The NEW Elzetta ZRX Tactical Flashlight Mount ismade for flashlights with standard one-inch bodies andwill accommodate a range from 0.94 to 1.04 inches (23.8to 26.4 mm). This includes many popular tactical flash-lights including the Elzetta ZFL-M60. The Elzetta ZRXclamping rings are made from Mil-Spec Type III Hard An-odized aluminum, the body is a glass-reinforced polymerand the hardware is steel. The ZRX weighs 1.1oz (32g).ZFH1500 AR15 Flashlight Mount K75-12020 $29.95ZSM Tactical Shotgun Mount K75-18050 39.95ZRX Tactical Flashlight Mount K75-15487 35.00

ZFH1500 Flashlight Mount for AR15s

ZSM Tactical ShotgunFlashlight Mount

ZRX Tactical Flashlight Mount

PROTEKTOR MODELThe Original Leather Sandbag* Rifle Rests

All Protektor Model leather bags aremade with the best top grain

cowhide available. The welded steelrest is strong enough to stand on andwon’t break if dropped (Owl Ear FrontBag sold separately). A. Front Bag K75-10880 $19.95B. Rifle Rest K75-10883 49.95C. Std. Front Bag K75-10881 22.95D. Rear Bag K75-10882 26.95

*Sand not included.

A.

B.C.

D.

The Dillon Shooting Mat

Dillon’s shooting mat is made of tough ballistic-weavenylon fabric, with a large skid-resistant elbow pad

area. The “ground” side is moisture resistant and wipesclean easily. The padding is dense, closed-cell foam toprovide both shooter comfort and a stable shootingbase. The mat is equipped with a shoulder strap, acarry handle and two straps with snap-release buck-les. Dimensions: 66” x 27.75”

K75-18146 $65.00

This three-piece shooting bag set is an incredible valuefor the money! The bags are made of durable, water-

resistant 600 denier polyester and provide a steady andsolid shooting system for long guns and handguns. Ifilled the ones in the photo with walnut tumbling mediaand found them to be easy to fill and much lighter tocarry than when filled with sand.

K75-15384 $29.95


TARGET

TACTICALSPORTS®

Magna-Matic’s Carbon Removal Tools quickly remove carbonfrom your rifle with ease and precision.

CRT-15 (AR15/M16) K75-11705 $49.95CRT-25 (AR10/SR25) K75-29025 49.95CRT-14 (M1A/M14) K75-29823 41.99

C-Products 30-Round alu-minum M-16/AR-15 maga-

zines.K75-15593 $19.95

UTG Brass Catcherfor AR15s

Brass Catcher K75-15478 $9.99

Buffer Technologies’ Recoil Buffer™ re-duces felt recoil and increases muzzle

control. Easy installation. Beretta 92 K75-18539 $24.95

(Includes buffer and guide rod.)Browning HP K75-18540 9.95CETME K75-18541 19.95CZ 75 K75-18542 9.95FN FAL K75-18543 14.95GLOCK (pictured) K75-18545 9.95HK 91 K75-18544 19.95Ruger 10/22 K75-10526 9.95Ruger Mini-14 K75-10525 14.95SIG 220/226 K75-19123 24.95S&W Model 41 K75-18486 9.95

In “MIL-SPEC Speak,” this is a KIT,CLEANING, BUTT STOCK M16A2 RIFLE,

which contains: ROD, CLEANING, SMALL

ARMS: M11E3; CASE, SMALL ARMS ACCES-SORIES; BRUSH, CLEANING SMALL ARMS;BRUSH, CLEANING SMALL ARMS: BORE;BRUSH, CLEANING SMALL ARMS: CHAMBER;AND BOTTLE ASSEMBLY LSA 5 OZ. It justdoesn’t get much more MIL-SPECthan that.

K75-15383 $14.99

M-16/AR-15BUTTSTOCK CLEANING KIT

A. B.


72 Comp-Tac’s Trojan Horse Long Gun Case

The Trojan Horse Long Gun Case is the first of its kind: asafe, comfortable, simple and unobtrusive way to carry

your long guns with you. No longer do you need to worryabout a casual observer spotting you with a “Gun” case asyou transport your long guns to and from your car. Instead allthey will see is a person with a sports bag. It measures 36”Long, 4”-15” Wide, 4” Deep and features rigid side panelsthat provide concealment with no printing; an adjustable,padded shoulder strap with side-release buckle on either end;a heavy duty zipper with tactical speed pull attachment forquick deployment; inside divider with Molle straps; and twoinside zippered pockets. Will hold up to 20” long barrel withcollapsible stock.Standard Trojan Horse Long Gun Case K75-19388 $75.00Heavy Rated Trojan Horse Gun Case K75-16229 100.00

TACCOM Five-Round Magazine Extensions for MagPul Gen 3PMAG 40-round 5.56 magazines and current M3 Generation

(20- and 25-round) 7.62 PMAGS are designed to fit and functionwithout modification. Previous-generation 20-round 7.62 maga-zines can be modified to work with the extension. The 5.56 exten-sion will also work with PMAG 30-, 20-, and 10-round magazines,but will not lock in place (instructions for use included). A. 5-Round 7.62 Extension K75-19542 $24.95B. 5-Round 5.56 Extension K75-19541 18.95

AR MAGAZINES

MSAR 30-Rd. polymer AR-15/M-16 mags for 5.56 &

.300 Blackout.K75-19105 $12.99

TACCOM, LLC Mag Extensions

Juggernaut M-16/AR-15 magazine follow-ers (3 Pack).

K75-19395 $6.50

MAGPUL 30-Round polymerPMAG GEN M2 M-16/AR-

15 magazines.K75-12644 $14.95

73

GRSC CQB Slings, Sling Mounts and Front SwivelsGRSC CQB Slings, Sling Mounts and Front Swivels

The GSRC CQB Sling was designed as a mission-specific sling forCQB operations. It attaches only at the rear of the firearm and al-

lows the operator to quickly transition to a handgun if necessary.

A. CQB Sling With Quick-Release Hook K75-19172 $39.95CQB Sling Without Hook (not pictured) K75-19173 $24.95B. CAR-15 Ambidextrous CQB Sling Mount with slots K75-18968 $14.95

CAR-15 Ambidextrous CQB Sling Mount without slots (picturedmounted on rifle above) K75-19170 $14.95C. A2-Style AR-15 CQB Right-Hand-Only Sling Mount K75-19168 $34.95D. Remington 870 Shotgun Ambidextrous CQB Sling Mount K75-19169 $24.95

A. B. C. D.

Viking Tactics Sling for CAR-15 K75-11961 $34.95Viking Tactics Sling for FN-FAL/HK-91 K75-11962 40.00

Viking Tactics’ V-TAC MK1 Sling is quick, instantlyadjustable to improve your shooting position, allows

shooting from weak-side shoulder, secures the carbine duringhandgun transitions, and allows hands-free movement in diffi-cult surroundings.

Viking Tactics V-TAC MK1 Sling

Developed from the experi-ence of the MagPul®

Team, the B.A.D. Lever™ isdesigned to improve the speedand efficiency of the AR-15/M-16 by enabling the shooter tomanipulate the bolt catch with-out moving away from theready position.

MagPul B.A.D. LeverK75-27058 $29.95

The MagPul® Enhanced Trig-ger Guard™ is a black

anodized aluminum drop-inreplacement for the AR15/M16weapons platform. It features ashallow "V" shape for better useof gloves in tactical shooting orcold weather operations. It’s non-folding and has rounded edges.

Aluminum Trigger GuardK75-12611 $19.95

MAGPUL UNFAIR ADVANTAGEEnhanced

Self-Leveling AR-15/M16

Mag Follower

Enhanced TriggerGuard, Aluminum

AR-15/M16

“Battery AssistDevice” for AR-15/M16

MAGPUL’s Enhanced Self Lev-eling Follower is a drop-in

replacement for USGI 30-roundmagazines. Features a four-wayanti-tilt design. 3-Pk. K75-12606 $6.95

™®


M-14 Bolt Roller GreaserJuggernaut Anti-Tilt AR-15 Mag Followers

So THAT’s how you grease that littleS.O.B. (Slick-Operating Bolt, that is.)

M-14/M1A Bolt Roller GreaserK75-18531 $6.75 K75-19550 $19.99

AR-15 Charging Handle

37” Black Rifle Case K75-25336 $69.9542” Black Rifle Case K75-25344 69.9546” Black Rifle Case K75-25337 69.95

38” Black Discreet Rifle Case K75-25339 $99.9542” Black Discreet Rifle Case K75-25360 113.9547” Black Discreet Rifle Case K75-25338 116.95

GalatiAR Case

GalatiDiscreet Case

The AccuWedge fits betweenthe upper and lower re-

ceiver on your AR-15, remov-ing excess movement. AccuWedge K75-19122 $4.95

The AR-15 Extractor Upgrade increasesthe tension on the extractor, pushing it

deeper into the cartridge extractor groove. K75-19121 $12.95

AccuWedge AR-15Extractor Upgrade

Jerry Miculek’s three-chamber AR-15Compensator fits threaded-barrel rifles

and may be “clocked” for left- or right-handed shooters. Used by many top three-gun competitors.

K75-11328 $49.95

Jerry MiculekAR-15 Compensator

The Badger Ordnance Tac Latch makes itmuch easier for you to operate the latch

on your AR-15/AR-10 charging handle. Itworks especially well for “flat-top” riflesequipped with low-mounted optics.

K75-10379 $18.95

Perma-Pin Firing Pin Retainer for M-16and AR-15 replaces the standard cotter

pin found in the bolt carrier to retain the fir-ing pin (as in original Stoner rifles). Made oftool steel. No modification to gun required.

K75-19927 $7.95

KNS Precision, Inc.

The Specialized Dynamics AR-15 Emer-gency Repair Kit includes: three gas

rings, extractor spring, firing pin retainingpin, buffer retaining pin/spring, hammer/trigger pin, take down detent and spring.

K75-19460 $19.95

Emergency AR(epair) KitCrucial Parts for Your AR-15 Tac Latch

TC–Accessories’ AR-15/M-16 Brass De-flectors are CMP/NRA approved for

service-rifle competition. Now you can pileyour spent brass at your feet instead of wast-ing time hunting it down.Standard AR-15 K75-12541 $19.95Flat-top K75-12542 19.95Removable Carry Handle K75-12543 19.95

AR Brass Deflector

AR15 Tritium/Fiber Optic Front SightK75-18626 $69.95

TRUGLOTactical Sights

74

ODIN Works EX-TENDED

MAGAZINE RE-LEASE allows youto rapidlychange magswithout disruptingyour shooting position. The XMR features anergonomic design that is four times largerthan factory magazine buttons and is con-toured for positive depression and reducedslip. Anodized in your choice of matte black(pictured), ODIN green, or red.Black XMR K75-11996 $19.95Green XMR K75-11998 19.95Red XMR K75-11997 19.95

ODIN Works XMREXTENDED MAGAzINE RELEASE FOR AR-15S

Roller Cam Pin UpgradeIncludes Gas Key

K75-25363 $45.00

JPFC-1 .154 Small Pin Fire ControlKit w/CD-ROM Instructional VideoK75-12616 $119.95

Roller Cam Pin UpgradeFor AR-10/7.62 AR VariantsK75-25362 $25.00

Six-Position Mil Spec Carbine Buffer TubeK75-25365 $39.95

Custom Stainless Bolt CarrierJPFBC-3 SP Low Mass,

Stainless FinishK75-12584 $225.95

JP AR Speed HammerJPSH-1A Low Mass HammerK75-12617 $59.95

Carbine Operating SpringJPS-OSC Carbine

K75-12594 $19.95

JP Custom Rifle Operating SpringJPS-OSR Rifle

K75-12587 $19.95

JP CompensatorJPTRE-2 1/2” x 28 TPIw/Exit Hole for .223Matte Black Finish

K75-12614 $89.95

JP Recoil EliminatorJPRE-2 1/2” x 28 TPI

Standard Version for AR15/M16Matte Black Finish

K75-12615 $99.95

JP AdjustableGas SystemJPGS-2FS

JP A2 Front Sightw/Gas ValveK75-12591$129.95

JP ReducedPower ARSpring SetK75-12618$10.95JP Enhanced

Reliability, ReducedPower ARSpring SetK75-12590$10.95

JPGS-2B w/QuickDetach RailK75-12592$89.95

JP Enterprises, Inc. Tactical Performance Gear

JP Enterprises (Competition Only) Low Mass BufferJPLMB

K75-12585 $59.95

JP Enterprises .223 JP EnhancedBolt™ Assembly JPEB-223 SAE3910 ConstructionK75-12586 $124.95

75

Trigger System, Incl. KNS PinsK75-19386 $199.99

Trigger System, Incl. KNS PinsK75-19387 $229.99

POF-USA AR-15/M-16 Parts


Enhanced Finger PlacementAR-15 Lower Parts Kit

K75-25364 $65.00

C-More Systems RTS Sight features a built in Picatinny/Weaver style rail mount.RTS 3.5 MOA, Black K75-14518 $419.00RTS 7 MOA, Black K75-14563 419.00C-More Systems STS Sight is the smallest C-More madeand many specialized mounting options are available.STS 3.5 MOA, Black K75-14345 $399.00STS 7 MOA, Black K75-14346 399.00STS Mount, Large Glock K75-14367 39.99STS Mount, Small Glock K75-14372 39.99STS Weaver/Picatinny Mount K75-14373 47.99STS 30mm Scope Tube Mount K75-14379 47.99STS 1” Scope Tube Mount K75-14474 47.99CR2032 Lithium STS/RTS Battery K75-14721 5.00C-More Systems Railway SightPolymer 8 MOA Black K75-16413 $249.00Aluminum 8 MOA Black K75-14611 299.00C-More Systems Tactical Railway Sight features a built-inspacer to co-witness with sights on flat-top AR-15s

Polymer 8 MOA Black K75-16511 $259.00Aluminum 4 MOA Black K75-14612 309.00C-More Systems Tactical Sight features an A-2 Style rearaperture sight and mounts to flat-top AR-15sAluminum 6 MOA Black K75-11444 $444.00Polymer 6 MOA Black K75-11605 399.95C-More Systems Colt Scout SightAluminum 6 MOA Black K75-16808 $368.00Replacement Modules for Railway/Scout/Tactical Sights2 MOA Dot Module, Polymer K75-14620 $49.002 MOA Dot Module, Aluminum K75-14643 49.004 MOA Dot Module, Polymer K75-16415 49.004 MOA Dot Module, Aluminum K75-14691 49.006 MOA Dot Module, Polymer K75-16416 49.006 MOA Dot Module, Aluminum K75-14696 49.008 MOA Dot Module, Polymer K75-14717 49.008 MOA Dot Module, Aluminum K75-14720 49.00Railway/Scout/Tactical Battery K75-17034 4.00

76

500 yards.Compact design,

30mm tube andbright illumination of the reticle are just a

few of the many features of the DMS-1. Brightred illumination of the reticle adds to the quick-

ness of the sighting system in day and low-light condi-tions. At one power it works well as a reflex sight and at

longer ranges the four-X magnification gives increased ac-curacy.

K75-19458 $249.95

The Designated Marksman Scope fills the requirementsof the law-enforcement officer, rifle shooter, and the

big-game hunter who needs a quick sighting system atranges of five to 500 yards. The “Dot in a Donut” reticleallows for fast, natural aiming. The shooter’s eye lines upthe circle at close range, and the one-MOA dot gives accuracy at the longerranges. Range estimation isstraight forward by use ofthe circle out to

Millett Designated Marksman Tactical Scope

Railway Colt Scout SightTactical Sight

C-M ORESYSTEMS


RTS

STS

Available in Standard Elevation or Plus-20 Minutes of AngleRemington Model 700 Short Action K75-19975Remington Model 700 Short Action + 20 MOA K75-19976Remington Model 700 Long Action K75-19977Remington Model 700 Long Action + 20 MOA K75-19978Savage Short Action RB K75-19979Savage Short Action RB + 20 MOA K75-19980

Savage Long Action RB K75-19981Savage Long Action RB + 20 MOA K75-19982Winchester Model 70 STD K75-19983Winchester Model 70 STD + 20 MOA K75-19984Winchester Model 70 Short Action K75-19985Winchester Model 70 Short Action + 20 MOA K75-19986

Evolution Gun Works Picatinny Rail Scope Mounts

Scout Scope Mounts provide an extremely stable optics base foryour AK, Saiga or SKS rifle and will not shift, vibrate loose or

change point of impact as the rifle heats up. Rock solid and easy toinstall, the two-piece design enables the removal and replacementof your optics without losing zero.

Scout Scope Mounts easily allow for complete DISASSEMBLY ofyour rifle for cleaning and maintenance while retaining zero. Theserifles are designed so that carbon build-up can easily be cleanedfrom the gas tube and piston. This is routine maintenance, necessaryin order to maintain a properly functioning rifle. Other mounts forAK-and SKS-style rifles make this difficult, time consuming and thenrequire that optics be re-zeroed.Scout Scope Mount for AK Rifle K75-25374 $79.99Scout Scope Mount for SKS Rifle K75-25373 78.99

Scout Scope Mounts for AK, SKS RiflesScout Scope Mounts for AK, SKS RiflesSorry, the optic

pictured here is NOTincluded with the

Scout Scope Mount.

$3999

77


Bushnell Trophy TRS-25Ultra Compact Red Dot Sight

Bushnell’s Trophy TRS-25 Ultra Compact Red Dot Sight isdesigned for use on shotguns, handguns and rifles. It is con-

structed and assembled by highly skilled craftsmen to Bushnell’shigh quality standards. The precision and craftsmanship withwhich this scope was built ensures its performance underdemanding conditions. This scope will provide the shooting accu-racy and repeatability which have made Bushnell legendary. Fea-tures unlimited eye relief and a three-minute of angle dot.TRS-25 (Pictured) K75-11643 $89.95TRS-25 HiRise with base K75-16227 119.95

You won’t believe how much this will de-crease your times from initial sight picture and

target transition. You’ll never lose your dot…and finding it hasNEVER been easier! Turning your C-MORE (Railway or Slide Ride)90 degrees and eliminating the rail mount will lower your dot by asmuch as 1” to the bore of your pistol…and lower is just going to in-crease your speed. And when you do torque your pistol, you’ll findthe dot just that much easier. Designed by Bearcave Machining andoffered by TACCOM, LLC.Ruger MK1 (pictured) K75-19535 $79.95Browning Buckmark K75-19534 79.95

TACCOM, LLC90° C-More Mount

Atwist of the wrist is – quite literally – all it takes to switch fromyour long-range optic to a CQB red-dot sight with Tactical

Sports’ 45-degree Offset Auxillary Optics Mount! Fits most Picatin-ny rails. (Pictured with Bushnell’s TRS-25, which is NOT included!)

45° Offset Optic Mount K75-14472 $14.99

TacticalSports

45°-OffsetAuxillary

OpticsMount

78

By Duane ThomasKimber’s Rimfire Super is a Government Model

sized, 1911-pattern auto chambered for .22 LongRifle. Both its frame and slide are made of 7075-T7 aluminum; therefore it weighs 23 ouncesunloaded. Those used to hefting an all-steel Gov-ernment Model will be shocked at how light theRimfire Super is in the hand.

The slide, in addition to cocking grooves frontand rear, has been flat-topped, serrated alongmost of its length, and fluted to either side of theserrations. This slide configuration means theRimfire Super will not fit into a tightly moldedholster for a standard 1911.

Moving inside the gun, we note the absence ofsome things we’re used to seeing on 1911s, liketop barrel lugs and a swinging link. This is a blow-back; therefore no need for lugs and link since thebarrel doesn’t tilt downward during cycling. Wealso don’t see a frame mounted ejector; rather theejector is a long piece of metal pinned to the rearof the barrel, with an inward facing “hook” situat-ed so it’s in the path of a casing as it’s pulled outof the chamber by the extractor.

The barrel has a 1:16 right-hand twist, and isactually produced by Kimber, not a subcontractor.

The thumb safeties are ambidextrous, the frontsight tall and slightly undercut, the rear sightadjustable and patterned on the famed Bo-MarCombat Sight. The lugged, high-rise beavertail gripsafety would not reliably disengage with thestraight-thumbs grip I use. Were this my gun, a bitof grip safety sensitization would be in order.

The underside of trigger guard is checkered 30lines per inch; the tab of the slide stop is alsocheckered 30 lpi, according to my calibrated eye-ball; the mainspring housing goes 20 lpi. Theexternal slide stop does not automatically holdback the slide after firing the last shot. The slidestop may however be manually operated to lockthe action open, as when sitting the gun down ona bench after a string of fire.

The trigger is of the long variety, skeletonizedand aluminum. Trigger pulls, according to myNRA weight set, broke at 3-3/4 pounds, withapproximately 1/8-inch takeup and very, very littlein the way of creep and overtravel.

Magazines are molded polymer 10 rounders.Some folks, discussing Kimber .22 1911s with me,have commented, “I just wish they hadn’t cheapedout with the plastic magazine.” Those peoplereveal their ignorance. The most common esti-

The Kimber Rimfire Super

With its blackened aluminum alloy slide and silverframe, the Kimber Rimfire Super is a handsome pistol.

The ejector is a long, hooked piece of metal pinned tothe rear of the barrel.

Above: The frontstrap and underside of the trigger guardare checkered 30 lines per inch.

Right: The mainspring housing is 20 lpi.

Trigger is of the “long” variety – skeletonized, aluminumand fitted with an overtravel stop that was excellently

adjusted straight from Kimber.

The Kimber Rimfire Super would make an excellentunderstudy gun for economical rimfire practice with the

1911-pattern control layout.

79

DP

mate, among those in the know, for what some-thing like the precision injection mold for the Kim-ber .22 magazine costs was, “About $60,000.” Itwould have been much less expensive for Kimberto simply have their magazines made of sheetmetal by an outside vendor. They spent the extramoney, making the magazines themselves,because it gave them more control over toler-ances, and a better final product.

The Kimber Rimfire Super is set up to workonly with High Velocity ammo, Standard Veloc-ity won’t reliably cycle the action. I tested thisgun with eight different .22 loads. Those mar-keted as “High Velocity” included the DynamitNobel 40-gr. Copper Plated HP, Eley 40-gr.LRN, Federal “Classic” 40-gr. Copper PlatedRN, Federal Lightning 40-gr. LRN, and Reming-ton 40-gr. LRN. Hyper Velocity loads on handincluded the Federal “Classic” 31-gr. CopperPlated HP, Remington Viper 36-gr. JTC, and CCI40-gr. Mini Mag HP.

Accuracy was tested with 5-shot groups fromthe bench at 50 feet, the maximum distance possi-ble at the indoor range on which I do most of myshooting. Best accuracy saw four rounds go intoone hole, a fifth opening things up to .60” with,

amazingly enough, plain ol’ Remington HighVelocity outshooting even the refined, and pricey,Dynamit Nobel and Eley. In second place wasRemington Viper Hyper Velocity at .74”; DynamitNobel came in at .86”; Federal Classic HighVelocity at .90”; the Eley a disappointing (compar-atively) 1.05”.

Federal Lightning High Velocity and FederalClassic Hyper Velocity proved too lightly loadedto cycle the action. Group sizes suffered accord-ingly, going as high at 3-1/2”. Obviously a loadso light it cycles inconsistently, or not at all,requiring hand cycling to complete, leads to agun that goes into battery very inconsistently,thus horrible accuracy. As with all .22 autos, it’sworth choosing your ammo for best accuracyand functionality with this gun.

With ammunition that actually worked theaction, however, I was very impressed with theKimber Rimfire Super. It suggests itself for anyonewho wants an understudy gun for their 1911, thatmay be fired by ammunition much less expensivethan their main centerfire weapon, or anyone whojust appreciates a very well-designed and pro-duced, beautiful handgun.Visit Duane’s site: Self-Defense-Handguns.com

The Kimber Rimfire Super

The tab of the extended thumb safety, even when com-bined with a high-rise beavertail grip safety, does notexpose the underlying hole in the frame, a rarity among

factory and even most custom 1911s.

Best accuracy at 50 feet was .60” with four rounds goinginto one hole, with inexpensive Remington High Velocity.

Safety levers are ambidextrous, and actually produced byKimber, not an outside vendor.

The barrel crown is deeply recessed to protect fromaccuracy destroying damage.

The slide has been flat topped, serrated longitudinally,and fluted on both sides of the serrations.

The KimberRimfire

Super postedsub-inch

groups at 50feet with avariety ofammunition.

The TTI Magazine Extension for MagPul AR-15 5.56 PMAGs isconstructed of machined aluminum.

K75-15770 $39.99

The TTI Benelli Extended AccuGuide Carrier is the first extendedcarrier ever manufactured from one solid piece of SAE 304

Stainless Steel, which eliminates the need for welding. It is heat-treated and polished, providing optimal performance. The Carrierfeatures an extended guided rail on each side to assist in centeringthe round while reloading. It will provide you the speed and com-fort of not having your thumb torn up after reloading. Compatiblewith: Benelli M1/M2/M3/SBE, Versamax.

K75-15769 $79.99

81


J. Dewey Manufacturing Company AR Gas Tubes

The Kershaw Nerve has 3-D machined G-10 scalesthat provide a great grip without roughing up your

pocket. Jimping on the back of the handle and in theindex-finger contour further enhances grip. It’s made of8CR13MoV stainless steel with CNC-machined G-10scales, a liner lock, and a 3-1/8” blade.

K75-15391 $19.95

just in, special purchases, bargains and close outs

CAA Gloves, Black, Large K75-19666 $26.95CAA Gloves, Black, X-Large K75-19667 26.95CAA Gloves, Tan, Large K75-19668 26.95CAA Gloves, Tan, X-Large K75-19669 26.95

J. Dewey AR Gas Tube, Short K75-15795 $9.95AR Gas Tube, Mid-Length K75-15796 11.95J. Dewey AR Gas Tube, Long K75-15800 9.95

While they last, we havecombination

cowhide and Kevlar®tactical gloves at close-out prices! How can yougo wrong?

Winchester’s Twist Leg Bi-Podis compact,

lightweight, easily at-taches to your rifle’ssling swivel stud,and features twistlock legs for un-shakeable prone andbench shooting.

Command Arms Accessories Gloves

Smith &Wesson

FoamEarplugs

WinchesterHearing

Protection

HubbardProduct

DevelopmentFirearmsLubricant

K75-19671 $29.95

200 PairK75-19551$29.99

K75-15445$7.99

Pink CordedEar PlugsK75-19670

$1.99

Winchester Twist Leg Bi-Pod

J. Dewey Manufacturing Company AR Gas Tubes

Once-FiredCartridge CasesNote: Availability Varies,

Please Call First9mm cases 1000/box K75-19203 $49.95.223 cases 1000/box K75-10485 89.95

TARAN TACTICAL INNOVATIONS TARAN TACTICAL INNOVATIONS

NEW!NEW!

Speer ReloadingManual, Rifle & Pistol (Number 14)– The ultimate load-ing guide for shoot-ers who are usingSpeer projectiles.

K75-12580$29.95

Reloading Guides –These guides are com-piled from the mostrecent data availablefrom all the major pow-der and bullet manufac-turers.The convenientbinding allows the guideto lie open and flat onyour bench. $12.99 each. Revolver Guide K75-40010.45Colt/.454/.460/.475/.480/.500 K75-40060 Pistol Guide K75-40009 .223/.22-250 Guide K75-11762 .243/.270 Guide K75-40081 .308/.30-06 Guide K75-12209 .300 Win, Short, Ultra Mag K75-12210 7mm-08/7mm Rem, Ultra Mag K75-12211

The CompleteReloading Manualfor… Pretty much anythingyou’re likely to beloading! That’s right,all the data publishedby the various bulletand powder manufac-turers for YOURfavorite cartridge. $9.95 each

Handgun-Cartridge Manuals.32 H&R Magnum K75-15361.380 ACP K75-153629mm K75-15363.38 ACP K75-15365.38 Special K75-15364.357 Magnum K75-1536610mm/.40 S&W K75-15367.44 Special K75-15368.44 Magnum K75-15369.45 ACP K75-15370.45 Colt K75-15371Rifle-Cartridge Manuals.223 K75-15349.22-250 K75-15348.243 K75-15350.270 K75-153517mm-08 K75-153527mm Remington Magnum K75-153537.62 x 39 K75-15359.30 M1 K75-15354.30-30 K75-15355.308 K75-15356.30-06 K75-15357.300 Winchester Magnum K75-15358.45-70 K75-15360

Traveler’s Guide to theFirearm Laws of the FiftyStates – The myriad offirearm laws facing thegun owner of the early21st century can be intim-idating when traveling.

K75-30201 $9.95

Lyman 49th Edition ReloadingHandbook –Featuring MoreLoads, theNewest Compo-nents, MostManufacturers,and More LoadData than Ever!

K75-10330$24.95

Lyman’s Pistoland RevolverReloadingHandbook(Third Edition) –The World’sLeading Hand-gun ReloadingManual.

K75-18967$21.95

Lyman ShotshellReloadingHandbook,5th Edition –The NumberOne ShotshellLoading Man-ual.

K75-12846$25.95

Practical Shooting: BeyondFundamentals – The keys toconsistent, high-speedshooting are within youright now. This book willshow you ways to bringthem out.

K75-10750 $19.95

Gun-Guides Complete guides for allmodels of Ruger .22 pistols, 10/22 riflesand Mini-14s; and dis-/reassembly guidesfor other popular firearms. The Complete Guide $11.99 eachRuger .22 Pistols K75-40035Ruger 10/22 Rifle K75-40036Ruger Mini-14 K75-40037Dis-/Reassembly Only $6.99 each1911 Pistols K75-40045AK-47 K75-40038Browning Buckmark K75-40039Colt AR-15 K75-40040GLOCK Pistols K75-40041M1 Carbine K75-40042M1 Garand K75-40043Mauser Rifles K75-40044Mosin-Nagant Rifles K75-40046Mossberg 500 Shotguns K75-40047Remington 870 Shotguns K75-40048Remington 1100 Shotguns K75-40049Ruger Mk III Series .22 Pistols K75-40050Ruger Single-Action Revolvers K75-40051SKS Rifles K75-40052S&W M&P/Shield Pistols K75-432301903 Springfield Rifles K75-40061Springfield XD & XDM Pistols K75-40053Winchester 1300 Shotguns K75-40054

82


“Firestorm in the Desert (Machine Gun Magic)” – Dillon’s ownvideo portraying the history and excitement of the machine gunhobby. 60+ min.“Machine Gun Magic” DVD format K75-18312 $14.95“The Memphis Belle”/“The Fight for the Sky”Two-DVD Set K75-18320 $24.95

“Shooter Ready?” – Top quality instruction with all theexcitement of a major motion picture. 30 min.VHS format K75-13361 $15.95 “Shooter Ready?” DVD format K75-18313 $14.95“P51 Mustang”/“Corsair” Two-DVD Set K75-18321 $24.95

All Your Dillon-Video Favorites, NOW AVAILABLE On DVD!

SAVE $9.95 – Buy Both Air War DVD Sets K75-18319 $39.95

Overall Length Gauge The initial distance a bullet must travel

when fired (from the cartridge case mouthuntil it engages the rifling) is absolutelycritical to achieving peak accuracy. A freerun of .010 to .060 is commonly employedfor accurate target, varmint and huntingloads. Consequently, knowing and beingable to alter the dimensions, as needed, isvitally important to precision shooters andhandloaders.

OAL Gauge K75-14622 $38.95OAL Gauge, Curved K75-14862 39.95(Use for auto, lever and pump rifles)Modified Case (required).223 Rem. K75-14627 $6.99.22-250 K75-14628 6.99.243 Win. K75-14631 6.99.270 Win. K75-14641 6.997mm Rem. Mag. K75-14648 6.99.308 Win. K75-14652 6.99.30-06 K75-14653 6.99.300 Win. Mag. K75-14655 6.99Bullet Comparator

Correct bullet seating depth is criticalto accuracy. In addition, minor variationsin bullet seating depth will have an effecton both pressure and velocity. The L-N-LBullet Comparator provides precisionhandloading dimensions.

Bullet Comparator K75-14670 $16.95Comparator Insert (required).22 caliber K75-14672 $8.95.24 caliber K75-14673 8.95.25 caliber K75-14674 8.95.26 caliber K75-14675 8.95.27 caliber K75-14676 8.95.28 caliber K75-14677 8.95.30 caliber K75-14678 8.95.33 caliber K75-14679 8.95.35 caliber K75-14680 8.95.37 caliber K75-14681 8.95.45 caliber K75-14682 8.95

Attain Peak Accuracy With Hornady’s L-N-L O.A.L. Gauge, Bullet Comparator(Caliper not included)

83

On-Target Productions, Ltd. videos aredesigned to educate enthusiasts about

the selection, proper use, cleaning, disas-sembly/reassembly, and accessorizing offirearms. On-Target Productions’ videos are100 percent digital quality, focused on thedetails and are entertaining and education-al. Every video features clear, close-up pho-tography to enhance the instructional narra-tive from start to finish.

“AK-47” K75-40090“AR-15” K75-40087“AR-15 Maint. & Mods” K75-40099“Scratch Building an AR-15” K75-40101“1911” K75-40086“GLOCK” K75-40083“M1 Carbine” K75-40095“M1 Garand” K75-40094“Mossberg 500” K75-40092“Remington 870” K75-40089

“Ruger Mk. 2” K75-40091“Ruger Mk. 3” K75-40097“Ruger 10/22” K75-40088“Ruger Mini-14” K75-40096“SKS” K75-40093“S&W M&P” K75-40084“S&W Revolvers” K75-40100“Sig Sauer P226” K75-40098“Springfield Armory XD” K75-40085

All videos are DVD format $19.95 each

Ultimate Advanced Revolverwith Jerry Miculek – The

World’s Greatest Revolver Shoot-er Jerry Miculek is recognized asthe fastest and most accuraterevolver shooter in the world. Hisspeed and skills are, in oneword…Amazing! They’ve beenverified in hundreds of local andnational competitions. In this pro-gram, he shares with you some ofthe techniques and secrets he hasmastered over the past 25 years to become the shooterhe is today. And, you’ll see an incredible display ofrevolver shooting and reloading. 100 min.

K75-14608 $19.95

Competition Reloading withBrian Enos guides you through

a complete step-by-step reloadingprocess for IPSC, Steel Challengeand NRA Bianchi Cup style shoot-ing. Using a Dillon Precision XL650 reloader with CP brass andCP bullets, Enos demonstratesproper reloading techniques forthe most popular loads used bythe top shooters. Enos is, ofcourse, a champion himself, win-ner of the Masters Competition,the NRA Bianchi Cup and a top contender in the USPSAfor many years. Run time: 80 minutes.

K75-14341 $19.95

Close & Ready Bedside Holster CaddyThe key to the successful gunfight-

ers of the Old West was not somuch the weapon of choice, butrather the holster. How quickly theweapon could be retrieved, aimedand fired was the difference betweensurvival and becoming a statistic. TheClose & Ready Holster Caddy pro-vides a faster and safer way to protectyour family. It works with most exist-ing holsters and slides easily betweenthe mattress and box springs oneither side of your bed.

K75-18046 $29.95Holster NOT

Included

Wise Company’s Two-Week Essential Sur-

vival Product & Food Kit forone person (or one week fortwo people). Kit includes:Packages of Pocket Tissue (6)4-in-1 Dynamo Flashlight (1)Deck of Playing Cards (1)Water Proof Matches (50)Waste Bags (2)Note Pad (1)Golf Pencil (1)Mylar Sleeping Bags (2)Leather Palm Work Gloves (1)36 Piece Bandage Kit (1)Water Filtration Bottle (1)Portable Stove (1)

Stove Fuel Tablets (16)Metal Fork (1)Knife and Spoon (1)Sierra Cup (1)Wise Emergency Food Supply(44 Servings) including:Savory StroganoffChili MacaroniCreamy a la King and RicePasta AlfredoCreamy Pasta and Veg RotiniTeriyaki and RiceCreamy Tomato Basil SoupHearty Tortilla SoupApple Cinnamon CerealBrown Sugar and Maple CerealCrunchy Granola

Be prepared for any emergency with Wise Company’s 72 HourEmergency Entrée Kit. Each kit includes four servings per

day (total of 12 servings) of 20 ounce lunch and dinner entréesshown in the following schedule: Day 1: Two 10-ounce servings ofCheesy Lasagna and Beef cook-in-the-pouch entrée; and two 10-ounce servings of Pasta Alfredo with Chicken cook-in-the-pouch en-trée. Day 2: Two 10-ounce servings of Noodles and Beef in SavoryMushroom Sauce cook-in-the-pouch entrée; and two 10-ounceservings of Teriyaki Chickenand Rice cook-in-the-pouchentrée. Day 3: Two 10-ounceservings of Chili Macaroni withBeef cook-in-the-pouch entrée;and two 10-ounce servings ofCreamy Pasta and VegetableRotini with Chicken cook-in-the-pouch entrée.

Wise Company’s 60 Serving Gourmet Entrée Only “Graband Go” Food Kit includes two servings per day (entrées

only) for one adult for one month or four adults for one week. Prod-uct within this Bucketis: Savory Stroganoff (8servings), Chili Maca-roni (8 servings), PastaAlfredo (8 servings),Creamy Pasta and Veg-etable Rotini (8 serv-ings), Cheesy Lasagna(4 servings), Teriyakiand Rice (8 servings),Creamy Ala King andRice (8 servings), andCreamy Tomato BasilSoup (8 servings).

Wise Company’s 60 Serving Gourmet Freeze Dried Meat“Grab & Go” Food Kit includes 60 servings of assorted

gourmet-seasoned freeze dried meat and a 20-serving bonus oflong-term emergency rice, for a total of 80 servings. Productwithin this Bucketis: Roasted Chicken(12 servings), TeriyakiStyle Chicken (8 serv-ings), Cheesy Beef (8servings), SouthwestStyle Chicken (12 serv-ings), Savory RoastedGround Beef (12 serv-ings), Stroganoff StyleBeef (8 servings), andLong-Term Instant Rice(20 servings).

Wise Company’s 120 Serving Breakfast Only “Grab &Go” Food Kit includes 120 servings of breakfast assort-

ment (no en-trées). Productwithin thisBucketis: Apple Cin-namon Cereal(40 Servings),Crunchy Gra-nola (40 Serv-ings), andBrown Sugarand MapleMulti-Grain(40 Servings).

Wise Company’s 120 Serving Freeze Dried Vegetableand Sauce “Grab & Go” Food Kit includes 120 servings

of vegetable andsauce assortment.Product within thisBucket is: Corn (24servings), Peas (16servings), Broccoli (24servings), GreenBeans (24 servings),Butter Sauce (8 serv-ings), Cream Sauce (8servings), CheeseSauce (8 servings),and Mushroom Sauce(8 Servings).

Wise Company’s 120 Serving Freeze Dried Fruit andSnack “Grab & Go” Food Kit includes 120 servings of

fruit and snack assort-ment. Product withinthis Bucket is: Ba-nanas (16 servings),Strawberries (16 serv-ings), Peaches (16servings), Apples (16servings), CaramelSauce (16 servings),Yogurt (16 servings),and Pudding (16Servings).

Are YOU Ready?Are YOU Ready?

$179.00K75-15298

$119.95K75-15297

$199.00K75-15303

$144.99K75-15300

$129.99K75-15299

$134.99K75-15302

$37.95K75-15296

84


85


CED M2 ChronographK75-17926 $199.00

The M2 Chronograph comes with sensors, screens andone two-foot mounting bracket. A nylon carrying case

and tripod are available options. The CED7000 ShotTimer is a breakthrough in technology. No other timer todate offers this combination of advanced features, com-pact size and light weight. This is the “next generation”Shot Timer here today! Comes with a rechargeable batterywith low-battery LCD indicator and a universal charger.

COMPETITIVE EDGE DYNAMICS

M2 Chronograph Accessories Infrared Chronograph Upgrade Kit K75-12116 $89.00Rechargeable Batt. Pack for Above K75-12117 48.00Nylon Carrying Case K75-18145 35.95Tripod K75-18126 39.952-Ft. Skyscreen Mounting Bracket K75-18120 14.95Replacement Skyscreens K75-18124 21.95Replacement M2 Sensor K75-18877 36.95

CED7000 TimerK75-19208 $119.95

Nobody likes to think about it, but should a serioushunting/shooting accident occur, chances are the

drugstore “first aid kit” you have stashed under the seat ofyour truck won’t do much good. That’s why Cavalry ArmsMedical has produced trauma kits designed by ArmedForces medics.

The Cavalry Arms Medical P.T.K. (Personal Trauma Kit)contains a 15-gram package of Celox granules to controlserious bleeding, Nitrile gloves, a high-intensity Chem-Light, a six-inch Emergency Bandage with a second pad,and a 4.5-inch Kerlix Roll.

The A.T.K. (Advanced Trauma Kit) contains one 15-gram package of Celox granules, Nitrile gloves, a CPRFace Barrier, two VioNex Anti-Microbial Wipes, a high-intensity Chem-Light, two 4-inch Emergency Bandages,one 4.5-inch Kerlix Roll, two 2-inch Kerlix Rolls, one 3-inch Elastic Bandage, and two 5 x 9-inch sterile Abdomi-nal Pads. All contents of both kits are currently in use byreal-world combat medics.

Cavalry Arms Medical Trauma Kits

Personal Trauma Kit (P.T.K.) K75-19220 $29.95Advanced Trauma Kit (A.T.K.) K75-19322 69.95

Lyman Powder Pal

D-TERMINATORD-TERMINATORElectronic ScaleElectronic Scale

DILLON’S ‘ELIMINATOR’ SCALEDILLON’S ‘ELIMINATOR’ SCALE

• 900 grain/57 gram capacity• Accurate to 0.1 grain/0.01 gram• Uses four AA batteries (included)• Comes with its own AC adapter• Scale check weight included

(See Page 52 for additional scale check weight sets.) All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase.

$139.95K75-10483

$69.95K75-13480

Scale Cover K75-18387 $14.95(Note: Only fits current scale.)

Funnel Pan K75-18399 $5.95

86

87

PRSRT STD

U.S

. Pos

tage

PAID

Dill

on P

reci

sion

DILLON PHONE NUMBERSOrders/Expert Assistance: 800-223-4570

For orders and technical assistance.Order Status/Basic Orders: 800-762-3845

Order by stock numbers only(no technical questions please);

or to quickly check the status of your order. Catalog Request: 800-762-3844To order The Blue Press catalog.

Dillon Showroom Hours: M-F, 9a-6p; Sat., 8a-3p

See Page 71

The

BLU

E P

RE

SS

Dill

on P

reci

sion

Pro

duct

s, In

c.80

09 E

. Dill

on’s

Way

Scot

tsda

le, A

Z 8

5260

-180

9

Scan

QR

Cod

e

Eliminates thesticky wax feel

lead bulletshave. 5 packK75-17108$6.95

GSIInternationalPre-Lube for Lead Bullets

See Page 37

TUFF Products

InLine MOLLE Mag Bag™See Page 29

TUFF Productsi Tuck Conceal CarryPhone/Firearm Holster

See Page 29

See Page 28

See Page 40

BLADE-TECH Inner/Outer Belt

BLADE-TECHAmbi EclipseStraight-Drop

HolsterSee Page 28

Color Coded Aluminum Toolheadsfor Your RL 550B & XL 650

AP Custom

USA ShotshellCarriers

Date post:	15-Nov-2023
Category:	Documents
Upload:	khangminh22
View:	0 times
Download:	0 times

2012 Blue Press - Dillon Precision

Documents