SPILL KITS & CONTAINMENT SYSTEMS - Oil Technics

SPILL KITS & CONTAINMENT SYSTEMSSPILL SYSTEMS • SECONDARY CONTAINMENT • DRUM & BULK STORAGE

www.spillkit.eu

Looking for a better way to store your absorbents?

Now there’s a new way to store and access sorbents for

all your leaks, drips and spills. The SPC Spill Centre is designed

to be flexible and customizable to meet all your spill control needs.

Check out the unique features the SPC Spill Centre has to offer you:

• Made from strong, durable and chemical resistant polyethylene for long life!

• Double use: use it as a spill kit or as an absorbent storage and dispensing station.

• Modular design: stack 2 or 3 units together to make a cabinet.

• Dual access doors: allow easy and quick access to your absorbents.

• Add wheels and it’s mobile!

• Dimensions: 126 (L) x 53 (W) x 66 (H) cm

Spill Centre Accessories

SPC Spill Centre - modular and mobile storage cabinets designed specifically for your absorbents!

Part No.

SC-ACC

SC-4

SC-D15

SC-D40

Contents

Accessory Pack (goggles, gloves and disposal bags with ties)*

Set of 5 castors (Ø 7cm) - for use with single or double unit

Dowel (43cm)†

Dowel (106cm)

*SC-ACC Accessory Pack included in all filled Spill Centres †SC-D15 Dowel included in SCO-PRU, SCA-PRU & SCH-PRU

Spill Kits

2

Spill Centres - complete with Accessory Pack (SC-ACC) and the following Absorbents:

3 www.spillkit.eu

SCO-PRU

SCO-PSU

SCO-SWU

Maintenance

SCA-PRU

SCA-PSU

SCA-SWU

Hazardous Liquids

SCH-PRU

SCH-PSU

SCH-SWU

Cabinet Only

SC-3000

Contents

100 Pads (ENV100-M) - 41 x 51cm, 1 Roll (OP15-DP-E) - 38cm x 46m,

Dowel (SC-D15) - 43cm

100 Pads (ENV 100-M) - 41 x 51cm, 12 Socs (OIL412) - Ø 7.6 x 122cm

12 Socs (OIL412) - Ø 7.6 x 122cm, 8 Pillows (OIL1818-2) - 43 x 48cm

100 Pads (GP100-M) - 41 x 51cm, 1 Roll (MRO15-P-E) - 38cm x 46m,


100 Pads (GP100-M) - 41 x 51cm, 12 Socs (AW412) - Ø 7.6 x 122cm

12 Socs (AW412) - Ø 7.6 x 122cm, 8 Pillows (AW1818-2) - 43 x 48cm

100 Pads (UN100-E) - 41 x 51cm, 1 Roll (UN15-DP-E) - 38cm x 46m,


100 Pads (UN100-E) - 41 x 51cm, 12 Socs (HAZ412) - Ø 7.6 x 122cm

12 Socs (HAZ412) - Ø 7.6 x 122cm, 8 Pillows (HAZ1818-2) - 43 x 48cm

Cabinet only - unassembled

230 Litres

179 Litres

96 Litres

189 Litres

140 Litres

98 Litres

161 Litres

133 Litres

98 Litres

N/A

Absorption Cap.Oil Only

www.spillkit.eu4

Simply select the Spill Bag from our range below. All are available for

Oil, Maintenance or Hazardous Liquid Spills.

• Easy to store - Vehicle, Forklift or wall mounted.

• Easy to deploy - Weatherproof zipped re-usable bag.

• Easy to refill - Clear view panel on bag shows when refill

is required.

Cost effective, easy to use solutions that offer fast local response for the unexpected small spill.

Contents

• 15 Pads, 41 x 51cm

• 3 Socs, Ø 7.6 x 122cm

• 1 Pair of Gloves

• 2 Disposal Bags c/w ties

• 1 Re-usable Zipper Bag

• 1 Pair of Goggles

20 Litre Spill Bag

Contents

• 20 Pads, 41 x 51cm

• 4 Socs, Ø 7.6 x 122cm



• 1 Re-usable Zipper Bag


40 Litre Spill Bag

Spill Kit Size Oil Only HazardousMaintenance Part No.

HAZ 20

HAZ 40

HAZ 20R

HAZ 40R

20 Litres

40 Litres

20 Litres - Refill

40 Litres - Refill

Part No.

OIL 20

OIL 40

OIL 20R

OIL 40R

Part No.

MRO 20

MRO 40

MRO 20R

MRO 40R

Spill Kits

The European ADR2005 agreement stipulates that carriers of dangerous goods are obliged to “Provide their trucks with all necessary safety equipment... and a Spill Kit.”

Cost effective, easy to use solutions that offer fast local response for the unexpected larger spill.

Contents

• 150 Pads, 41 x 51cm

• 4 Socs, Ø 7.6 x 122cm

• 8 Pillows, 43 x 48cm



• 2 Pairs of Gloves


• 1 200 Litre Drum

200 Litre Spill Drum


HAZ 50

HAZ 200

HAZ 50R

HAZ 200R

50 Litres

200 Litres

50 Litres - Refill

200 Litres - Refill

Part No.

OIL 50

OIL 200

OIL 50R

OIL 200R

Part No.

MRO 50

MRO 200

MRO 50R

MRO 200R

Simply select the Spill Drum from our range below. All are available for


• Easy to use - Contains and adsorbs spills rapidly.

• Weather proof - Packaging ensures contents remain dry.

• Choice of sizes - 50 Litre or 200 Litre.



• 1 60 Litre Keg

50 Litre Spill Drum

Contents

• 20 Pads, 41 x 51cm

• 4 Socs, Ø 7.6 x 122cm



www.spillkit.eu

Spill Kits

5

• For medium sized spills.

• Weather-resistant polyethylene container protects sorbents against dirt, moisture and damage.

• Hinged lid provides easy access to the products.

• Wheels allow excellent mobility in and outdoors.

Contents

120 Litre Mobile Spill Kit

• 50 Pads, 41 x 51cm

• 12 Socs, Ø 7.6 x 122cm






• 150 Pads, 41 x 51cm

• 4 Socs, Ø 7.6 x 122cm


• WYK Safety Sorbent, 2 x 1.14Kg




• 1 Warning Sign

Contents

For fast spill response anywhere in the plant.

Simply select the Mobile Spill Kit from our range below. All are available for



• 150 Pads, 41 x 51cm

• 6 Socs, Ø 7.6 x 122cm

• 6 Socs, Ø 7.6 x 244cm






• 1 Warning Sign

Contents

Spill Kits

6 www.spillkit.eu

For fast spill response anywhere in the plant.

360 Litre Overpack Drum/Spill Kit

• 100 Pads, 41 x 51cm


• 8 Socs, Ø 7.6 x 122cm

• 8 Socs, Ø 7.6 x 366cm

• 500 Wipes, 30 x 38cm




• 1 Emergency Response Handbook

• 1 Re-usable Overpack Drum

Contents

360 Litre Overpack Drum/Spill Kit

• An emergency response overpack for damaged or leaking drums.

• Affords excellent temporary storage of used absorbents.

• UN rated - packing groups 1, 2 and 3.


• 150 Pads, 41 x 51cm

• 36 Socs, Ø 7.6 x 122cm

• 20 Socs, Ø 7.6 x 244cm



• 1 Warning Sign

• OT8, 1 x 5 Litre (Oil Kit Only)




• 1 Re-usable Bin

Contents

Spill Kits

7


HAZ 120

HAZ 240

HAZ 360

HAZ 360OD

HAZ 650

HAZ 120R

HAZ 240R

HAZ 360R

HAZ 360ODR

HAZ 650R

120 Litres

240 Litres

360 Litres

360 Litres (Overpack Drum)

650 Litres

120 Litres - Refill

240 Litres - Refill

360 Litres - Refill

360 Litres (Overpack - Refill)

650 Litres - Refill

Part No.

OIL 120

OIL 240

OIL 360

OIL 360OD

OIL 650

OIL 120R

OIL 240R

OIL 360R

OIL 360ODR

OIL 650R

Part No.

MRO 120

MRO 240

MRO 360

MRO 360OD

MRO 650

MRO 120R

MRO 240R

MRO 360R

MRO 360ODR

MRO 650R

www.spillkit.eu

www.spillkit.eu

OPA90 Marine Spill Kits - under the 1990 Oil Pollution Act (USA), oil tankers greater than 12 metres (400 feet) must have a Spill Kit on board to handle a 12 Barrel (1,900 Litres) oil spill.

Part No.

SL-7

SL-12

Description

Marine Spill Kit OPA90

Marine Spill Kit OPA90

External Dimensions

1,265 (L) x 855 (W) x 910 (H) mm

1,265 (L) x 855 (W) x 910 (H) mm (x 2)

Spill Capacity

7 Barrels (1,100 Litres)

12 Barrels (1,900 Litres)

Spill Kits

8

Contents

• 750 Pads, 41 x 51cm

• 12 Socs, Ø 7.6cm x 122cm


• 12 Booms, Ø 13cm x 3m

• 1 Sweep, 45cm x 30.5m


• 2 Pairs of Safety Goggles

• 5 Disposable Jump Suits

• 2 Non-spark Scoops

• 10 Yellow Disposal Bags c/w ties

• 1 Non-spark Pump

• 2 20 Litre Buckets

• 1 Anti-static shovels

• 1 Re-usable 1,100L Bin

7 Barrel Marine Spill Kit OPA90

Contents

• 950 Pads, 41 x 51cm

• 48 Socs, Ø 7.6cm x 122cm


• 20 Booms, Ø 13cm x 3m

• 4 Sweeps, 45cm x 30.5m


• 2 Pairs of Safety Goggles

• 5 Disposable Jump Suits

• 2 Non-spark Scoops

• 10 Yellow Disposal Bags c/w ties

• 1 Non-spark Pump

• 2 20 Litre Buckets

• 1 Anti-static shovels

• 2 Re-usable 1,100L Bins

12 Barrel Marine Spill Kit OPA90

9

• Reusable plastic box allows you to refill your spill boxes once pads have been used.

• Light-weight - easy to fix to any surface.

• Yellow colour for high visibility.

• Can fit behind seat on a truck or forklift.

• Visual instructions printed on front and back for both use and re-filling.

• Available for Oil Only, Maintenance & Hazardous Liquids.

• Dimensions: 44 x 53 x 4cm.

Spill Box - pads in a convenient dispenser box, giving an opportunity to create multiple spill stations in your plant!

Spill Kits

Description Oil Only HazardousMaintenancePart No.

SA-SBH

(inc. 10 pads, 41 x 51cm)

UN100-E

(100 pads per box)

Spill Box

Pad Refills

Part No.

SA-SBO


SXT200-E

(200 pads per box)

Part No.

SA-SBA


UXT200-E

(200 pads per box)

Capacity

10 Litres

136 Litres

Capacity

10 Litres

136 Litres

Capacity

9 Litres

88 Litres

www.spillkit.eu

Spill Kit Add-ons - to re-stock or enhance your existing Spill Kits.

Part No.

SKA01

SKA02

SKA03

SKA04

SKA06

SKA09

Description

Safety Goggles

Nitrile Gloves - X-Large

Disposable Suits - X-Large

Oily Waste Bags - 500g

Cable Ties - pack of 100

Hazardous Spill Warning Sign

Dimensions

-

(L) 330 mm

-

889 x 593 mm

(L) 300 mm

-

www.spillkit.eu

SKB06 SKB04

Bins & Drums - a range of spare or replacement bins & drums for your existing Spill Kits.

SKB03

Spill Kits

SS16SS15SS14

Part No.

SS14

SS15

SS16

Description

Overpack Drum - small

Overpack Drum - medium

Overpack Drum - large

External Dimensions

Ø 580 x 480 (H) mm

Ø 580 x 760 (H) mm

Ø 810 x 1,050 (H) mm

Capacity

51 Litres

114 Litres

360 Litres

Overpack Drums - clean & safe storage of used & damaged hazardous containers.

SKB09

Description

Wheelie Bin - Yellow




Lockable Spill Bin

Spill Bag - 20/40 Litre Kit

External Dimensions

55 (L) x 48 (W) x 98 (H) cm

72.5 (L) x 48 (W) x 107.5 (H) cm

72.5 (L) x 62 (W) x 109 (H) cm

77 (L) x 137 (W) x 121 (H) cm

126.5 (L) x 85.5 (W) x 91 (H) cm

39 (L) x 16 (W) x 46 (H) cm

Capacity

120 Litres

240 Litres

360 Litres

650 Litres

350 Litres

20/40 Litres

Part No.

SKB01

SKB02

SKB03

SKB04

SKB06

SKB07

• Tight, secure & leak-free containers.

• Meet UN Group 1 Regulations.

• Impervious to acids, corrosives and a

wide range of hazardous liquids.

• SS14 will contain bottles, cans and damaged 20 Litre Drums.

• SS15 will contain damaged drums up to 59 Litres in size.

• SS16 will contain a damaged 205 Litre Drum.

10

11www.spillkit.eu

Spill Systems

Part No.

SB-3

Description

Spill Barrier 10.5cm (W) x 3m (L) x 5.5cm (H)

External Dimensions

SPC Spill Barrier - designed to contain or divert spills quickly and easily!


• Chemical resistant - polyurethane resists water, oil and many chemicals.

• Re-usable after cleaning.

• Works best on smooth surfaces.

Part No.

PVC18L

BAG-PVC18L

PVC24L

BAG-PVC24L

PVC36L

BAG-PVC36L

PVC42

BAG-PVC42

Description

Slikstopper - Small

Slikstopper Bag - Small

Slikstopper - Medium

Slikstopper Bag - Medium

Slikstopper - Large

Slikstopper Bag - Large

Slikstopper - Extra-Large

Slikstopper Bag - Extra-Large

46 x 46 cm

Ø 20 x 60 cm

61 x 61 cm

Ø 20 x 80 cm

91 x 91 cm

Ø 25 x 110 cm

107 x 107 cm

Ø 25 x 130 cm

External Dimensions

Slikstopper - the best way to seal off drains and keep spills out!


• Chemical resistant - flexible PVC resists water, oil and many chemicals.

• Re-usable after cleaning with mild degreaser and water.

• Works best on smooth surfaces.

• Bag available for easy transportation and storage.

12 www.spillkit.eu

SS06

• Suitable for a wide range of storage applications.

• 100% polyethylene.

• UK & EC compliant bund storage.

• Lockable doors. • Integral sumps.

Cabinets - a range of polyethylene cabinets, all with lockable doors and built-in sumps.

SS07

SS03 SS04 SS05 SS06

Part No.

SS03

SS04

SS05

SS06

SS07

Description

Small Cabinet (2 shelves)

Medium Cabinet (3 shelves)

Cabinet

Cabinet (1 shelf)

Cabinet (1 shelf)

External Dimensions

440 (W) x 545 (L) x 990 (H) mm

570 (W) x 650 (L) x 1,650 (H) mm

920 (W) x 720 (L) x 1,835 (H) mm

920 (W) x 720 (L) x 1,835 (H) mm

920 (W) x 720 (L) x 1,520 (H) mm

Weight

15kg

40kg

56kg

60kg

52kg

Sump Cap.

30 Litres

70 Litres

250 Litres

250 Litres

100 Litres

Spill Systems

SS03 SS05SS04

Poly Work Cart - a robust mobile workstation suitable for general maintenance and repair across all sectors.

• Made from sturdy 100% polyethylene.

• Secure internal storage area.

• Slotted opening in door for gloves & manuals.

• Two external trays.

• Lockable front wheels.

Part No.

SS02

Description

Poly Work Cart

External Dimensions

725 (W) x 640 (L) x 1,075 (H) mm

Weight

27kg

www.spillkit.eu 13

Part No.

SS13

Description

Poly Roll Holder

External Dimensions

625 (W) x 650 (L) x 1620 (H) mm

Weight

11kg

Max. Roll.

Ø 550 x 520 (W) mm

Spill Systems

Poly Roll Holder - a flexible and robust roll dispenser that accepts all standard absorbent and paper rolls.

• Ideal for environments where spills are likely and

a fast clean-up is essential.

• Suitable for janitorial, engineering and general

maintenance applications across all sectors.


• Accepts all standard roll sizes.

• Lightweight & easy to move.

• Can be fitted on top of the Poly Work Cart (SS02).

• Easy dispensing action.

Poly Maintenance Carts - a flexible and robust unit suitable for general maintenance and any spill management application.

Part No.

SS08

SS10

Description

Maintenance Cart

Maintenance Cart

External Dimensions

725 (W) x 640 (L) x 1520 (H) mm

725 (W) x 650 (L) x 1550 (H) mm

Weight

31kg

39kg

Max. Roll.

Ø 430 x 500 (W) mm

Ø 550 x 520 (W) mm

SS08 SS10

• Secure internal storage for drums & containers.

• Slotted opening in door for gloves & manuals.

• Complete with roll holder & hinged lid.

• Made from sturdy but lightweight polyethylene.

• Suitable for indoor or outdoor use.

• Lockable doors. • Lockable front wheels.

• Upper storage suitable for 5 Litre cans or pads.

• Lower storage suitable for 20 & 25 Litre drums or socs.

www.spillkit.eu

Spill Systems

14

Spill Magnet - fast absorbing powder which absorbs and retains up to 40 times its own weight!

• A new approach to handling spills - a fast absorbing powder granule that absorbs up to 40 times its own weight!

• Spill Magnet provides the answer for spill containment, vapour reduction and prevention of spills to drains and surface water.

• When fully absorbed, Spill Magnet can easily be swept up and removed for safe disposal.

• Quick acting • Non leaching • Spill containing

• For full list of Oil and Chemicals that can be safely absorbed by Spill Magnet, please visit www.oiltechnics.com

Bunded Trolley - the “must have” general purpose trolley for workshops, warehouses and laboratories across all sectors.


• Can hold four 25 Litre drums.

• Ideal for safe transport & storage of small

drums, containers and other items.

• Two lockable castors.

• Suitable for indoor & outdoor use.

• Lightweight & easy to use.

Part No.

SS01

Description

Bunded Trolley

External Dimensions

700 (W) x 900 (L) x 980 (H) mm

Weight

18kg

Sump Cap.

100 Litres

Part No.

SM5

SM10

Description

Spill Magnet

Spill Magnet

External Dimensions

Ø 30 x 22 (H) cm

Ø 33 x 33 (H) cm

Pack size

5kg

10kg

www.spillkit.eu

Secondary Containment

15

Spill Decks - contain hazardous leaks in your drum storage and dispensing areas with these interchangeable decks.

Sump Cap.

80 Litres

Part No.

SC-SD2

SC-DK

Description

2 Drum Spill Deck

Sump Drain Kit

Load Cap.

1,136 kg

External Dimensions

1,320 (W) x 660 (L) x 150 (H) mm

Install this optional Sump Kit to allow decks

to be joined together to increase sump capacities

These low profile, 2-drum Spill Decks are a cost effective means for containing potentially hazardous leaks in your drum storage and dispensing areas.

• 80 Litre sump capacity.

• Manufactured by injection moulding to give extra strength and consistent size.

• Built-in clips allow safe and easy connections to create the drum storage platform of your choice.

• Nestable decks minimise storage space and reduced transportation costs.

• Integral forklift pockets for easy transportation.

16 www.spillkit.eu


Our Spill Decks and Spill Pallets* were compression tested to

+13,500Kgs and found to be in a like new condition after testing ...

or as the compression testing house said ...

“We had to stop at 13,636kgs in order to

avoid damaging the test rig!” *SC-SD2, SC-DP2 and SC-DP4

• Injection moulded for consistent

wall thickness, excellent finish,

lighter weight and extra strength.

• Both the 2 drum and 4 drum

Spill Pallets are the same height,

offering compatability and

easy transfer of drums.

• Grates can be interchanged

between the pallets and offer

large openings to easily

remove spills.

• Nestable pallets allow you to

make better use of plant,

warehouse or trailer space.

• Engineered to make sure you can

easily use your forklift or pallet jack

to relocate your pallets.

Spill Pallets - Ideal platforms for indoor storage of 110, 200 Litre drums and 1000 Litre IBCs.

17www.spillkit.eu

Part No.

SC-DP2

SC-DP4

SC-DK

SC-DP4X3

Description

2 Drum Spill Pallet

4 Drum Spill Pallet

Sump Drain Kit

1-3 IBC Spill Pallet

External Dimensions

1,320 (W) x 600 (L) x 430 (H) mm

1,320 (W) x 1,320 (L) x 430 (H) mm

Install this Sump Kit to allow Pallets to be

joined together to increase sump capacities

3 x SC-DP4 -

connect 3 SC-DP4 together plus 2 SC-DK Drain Kits

Load Cap.

1,136 kg

2,273 kg

6,819 kg

Sump Cap.

260 Litres

510 Litres

1,530 Litres

Connect 3 Spill Pallets -

store 1, 2 or 3 IBC’s

(1000 Litres each)

Designed to offer full compliance to the Oil Storage Regulations.

Exceeds EA Guideline PPG26: “The sump must be able to hold 110% of the largest container stored, or 25% of the total volume.”


www.spillkit.eu18

Sentry Lite - smaller, portable, non-drive through containment berm offers a cost-effective solution for containing spills.

• One-piece, lightweight portable containment system.

• Ideal for personnel and small equipment decontamination.

• Suitable for saddle tank ruptures and transformer storage.

• Deploys in seconds with no assembly

or tools required.

• Coloured yellow for safety.

• Smaller size for easy storage.

Sentry Decon Berm - features separate compartments to create a multiple berm system in one easy-to-use portable containment berm.

• Multi-function berm - can be used as standard berm

or deploy foldable wall partitions to create a

decontamination station.

• Foldable wall partitions make the unit compact - ideal for

storing in emergency response vehicles.

• Lightweight and compact for easy storage.

• Low profile for safer movement between compartments.

• Quick and easy setup - no assembly required.

Part No.

SB-DB2610

SB-DB3616

External Dimensions

183 (W) x 305 (L) x 20 (H) cm (2 compartments)

183 (W) x 488 (L) x 20 (H) cm (3 compartments)

Sump Capacity

1,036 Litres

1,544 Litres

Part No.

SB-SL44

SB-SL46

SB-SL48

External Dimensions

1.2m (W) x 1.2m (L) x 20cm (H)

1.2m (W) x 1.8m (L) x 20cm (H)

1.2m (W) x 2.4m (L) x 20cm (H)

Sump Capacity

299 Litres

450 Litres

602 Litres

www.spillkit.eu 19


Sentry QuickBerm - self-contained, portable containment system providing a superior measure of protection against leaks and spills.

• One-piece, lightweight portable containment system.

• Easy to deploy. • Rugged construction.

• Counter-balanced outside locking supports.

• Drive-in use.

Part No.

SB-SQ3

SB-SQ8

SB-SQ11

SB-SQ15

SB-SQ16

SB-SQ20

External Dimensions

3m (W) x 3m (L) x 30.5cm (H)

3m (W) x 7.9m (L) x 30.5cm (H)

3.6m (W) x 10.9m (L) x 30.5cm (H)

3.6m (W) x 15.2m (L) x 30.5cm (H)

4.2m (W) x 16.4m (L) x 30.5cm (H)

4.8m (W) x 20.1m (L) x 30.5cm (H)

2,830 Litres

7,356 Litres

12,227 Litres

16,980 Litres

21,396 Litres

29,888 Litres

Sump Capacity

• Pliable foam-filled construction - springs back into shape.

• “Speed Bump” design creates a 5cm high wall that won’t impede foot or vehicle traffic

• User-friendly - easy to install, versatile and adaptable.

• Durable vinyl - resists oil, coolants and most chemicals.

• Yellow colour for high visibility. • Economical

• Make in four easy steps: 1 Unpack 2 Cut the end off tube of caulk 3 Apply caulk to the bottom of the wall section 4 Place sections together and apply pressure.

Part No.

SB-MAB-KIT

SB-MAB-WALL

SB-MAB-COR

Description

Make-a-Berm Kit - 2 x 7.6m Wall sections, 4 corners, 1 roll strapping, 6 tubes silicone caulk

1 x 4.5m section

2 x corners

Sentry Make-a-Berm - do-it-yourself installation to create custom barriers for your facility’s applications.

1 2

3 4

www.spillkit.eu

Drum & Bulk Storage

20

Drum Storage Station - combines efficient drum storage and positive spill control.

• Maximises floor space - stacks up to 4 drums.

• Safe - drums stored above one piece 400 Litre sump.

• Clean - dispense from any drums safe in the knowledge

that any leaks or spills will be contained.

• Base module has integrated forklift channels to

facilitate easy relocation.

DB14

DB15

Spill Trolley - The single solution to dispense, store and move heavy drums within the workshop.

• Keeps the workplace safe & clean - any spills or leaks

are contained within the unit.

• Improves worker safety - ergonomic design minimizes

back strain and injuries.

• Improves efficiency by reducing unnecessary and

dangerous drum handling.

• Quick & easy clean-up thanks to open sump design.

• Nylon straps hold the drum securely in place.

Part No.

DB13

Description

Spill Trolley

External Dimensions

740 (W) x 1,600 (L) x 640 (H) mm

Weight

44kg

Sump Cap.

230 Litres

Part No.

DB14

DB15

Description

Drum Stack Module

Drum Base Module

External Dimensions

795 (W) x 1,240 (L) x 370 (H) mm

1,310 (W) x 1,450 (L) x 485 (H) mm

Weight

25kg

50kg

Sump Cap.

N/A

400 Litres

IBC Storage - for safe storage of 1 x 1000 Litre IBC.

• Bunded storage solution for IBC’s.


• EC & UK compliant.

• Removable decking for easy cleaning.

• Forklift pockets for easy transportation.

• DB67 shown with optional overflow tray (not included).

IBC & Drum Storage - can be used to store up to8 x 205 Litre Drums or 2 x 1000 Litre IBC’s.

Drum & Bulk Storage

www.spillkit.eu 21

External Dimensions

1,350 (W) x 1,760 (L) x 710 (H) mm

1,350 (W) x 1,760 (L) x 2410 (H) mm

Weight

107 kg

119 kg

Sump Cap.

1,100 Litres

1,100 Litres

Description

1 x IBC Storage

1 x IBC Covered Storage

Part No.

DB27

DB67

DB27 DB67

• Bunded storage solution for IBC’s or drums.



• Removable decking.

• Forklift pockets for easy transportation.

• Stackable for easier storage when not in use and economical shipping.

External Dimensions

1,360 (W) x 2,500 (L) x 565 (H) mm

Weight

136 kg

Sump Cap.

1,140 Litres

Description

2 x IBC Storage

Part No.

DB28

Drum & Bulk Storage

Part No.

DB70

DB03

DB04

DB05

DB06

Description

100L Spill Tray (includes grate)

45L Spill Tray (excludes grate)

Low Profile Truck Tray

Extra-Low Profile Spill Tray

Lab Tray

External Dimensions

720 (W) x 920 (L) x 175 (H) mm

590 (W) x 630 (L) x 170 (H) mm

840 (W) x 1450 (L) x 70 (H) mm

395 (W) x 598 (L) x 50 (H) mm

550 (W) x 630 (L) x 70 (H) mm

Weight

15kg

4.5 kg

6 kg

2.5 kg

2 kg

Sump Cap.

100 Litres

45 Litres

60 Litres

8 Litres

7.6 Litres

Spill Trays - the ideal solution for catching spills in the work area and the storage and handling of smaller drums, cans and equipment.

22 www.spillkit.eu

DB06

SS24

SS25SS22

Part No.

SS22

SS24

SS25

Description

IBC Funnel

Drum Funnel with strainer

Drum Tray

External Dimensions

Ø 640 x 150 (H) mm

Ø 610 x 230 (H) mm

Ø 870 x 190 (H) mm

Weight

4kg

4kg

5kg

Sump Cap.

N/A

N/A

50 Litres

Drum & IBC Funnel & Drum Tray - for cleaner transferof liquids from 205 Litre Drums or IBCs.


• Includes lid & optional integral debris strainer.

• Tray has 50 Litre sump capacity.

DB05

• Compact and lightweight - can fit into small areas.

• Strong - manufactured from 100% polyethylene.

DB03 DB04DB70

Poly Drum Dolly - safe & robust solution for moving 205 Litre Drums or smaller containers.


• Lightweight & easy to handle.

• 4 castors for added stability - 2 lockable.

• 30 Litre Sump capacity.

• DB10 includes steel handle for increased versatility and mobility.

DB09 DB10

External Dimensions

725 (W) x 725 (L) x 255 (H) mm

725 (W) x 725 (L) x 990 (H) mm

Weight

14 kg

15.5 kg

Sump Cap.

30 Litres

30 Litres

Description

Poly Drum Dolly

Poly Drum Dolly with handle

Part No.

DB09

DB10

Drum & Bulk Storage

www.spillkit.eu 23

Drum Storage Station - store your drums or cans safely in this robust covered sump pallet.

DB65 DB66

Part No.

DB65

DB66

External Dimensions

990 (W) x 1,490 (L) x 1,690 (H) mm

990 (W) x 1,490 (L) x 1,690 (H) mm

Description

2 x 205L Bunded Drum Storage

5 & 25L Bunded Can Storage

Weight

85 kg

90 kg

Sump Cap.

230 Litres

230 Litres


• Suitable for indoor or outdoor use.

• Fork pockets for easy transportation.

• DB65 for storing 2 x 205 Litre Drums vertically.

• DB66 comes with shelf for storing 5 and 25 Litre cans.

Metal Spill Pallet - for the safe & clean storage of your drums.

• Manufactured from 2mm sheet steel.

• Integrated leak-proof sump

• Suitable for both pallet truck & forklift truck transportation.

• Includes removable galvanised grate.

• Available for 2 or 4 Drum Storage.

• Restraining Strap also available.

Mobile Drum Pallet - for the safe & clean storage of your drums, with the added benefit of easy transport within your plant.

• Complete with 2 fixed & 2 swivel 125mm diameter castors.

• Two types available:

DB17 holds 2 drums

DB18 holds 1 drum & comes with dispensing cradle.

DB20 DB22

DB23

DB18

Part No.

DB19

DB20

DB21

DB22

DB23

Description

2 Drum Spill Pallet *

4 Drum Spill Pallet *

2 Drum Spill Pallet - splashback *

4 Drum Spill Pallet - splashback *

Restraining Strap *

External Dimensions

800 (W) x 1,400 (L) x 350 (H) mm

1400 (W) x 1,400 (L) x 275 (H) mm

800 (W) x 1,400 (L) x 1515 (H) mm

1400 (W) x 1,400 (L) x 1,400 (H) mm

-

Weight

60 kg

90 kg

62 kg

108 kg

Sump Cap.

250 Litres

300 Litres

250 Litres

300 Litres

-

Part No.

DB17

DB18

Description

Mobile Drum Pallet *

Mobile Drum Pallet with cradle *

External Dimensions

800 (W) x 1,400 (L) x 1,025 (H) mm

800 (W) x 1,400 (L) x 1,025 (H) mm

Weight

40 kg

65 kg

Sump Cap.

250 Litres

250 Litres

Drum & Bulk Storage

www.spillkit.eu 24

Stackable Drum Stand - horizontal or vertical drum storage solution.

• Available to accommodate 2 or 4 x 205 Litre drums.

• Stackable up to 2 high.

• Integrated forklift channels for easy transportation.

• DB24 & DB25 include integrated sump

• DB26 designed to be used with DB20 Spill Pallet.

Racking Bund - turn standard pallet racking into bunded racking.

DB25

* allow 3 weeks delivery time for these itemswww.spillkit.eu

Drum & Bulk Storage

25

Part No.

DB24

DB25

DB26

Description

2 Drum Vertical Stand *

4 Drum Vertical Stand *

2 Drum Horizontal Stand *

External Dimensions

800 (W) x 1,400 (L) x 1,305 (H) mm

1,400 (W) x 1,400 (L) x 1,230 (H) mm

700 (W) x 1,410 (L) x 825 (H) mm

Weight

90 kg

152 kg

141kg

Sump Cap.

230 Litres

300 Litres

N/A

DB26

Part No.

DB16

Description

Racking Bund

External Dimensions

1,310 (W) x 1,310 (L) x 210 (H) mm

Weight

25kg

Sump Cap.

220 Litres


• Racking bund sits across beams.

• Simple & fully compliant racking solution.

• Segregates pollutants & materials.

• Stops leaks & drips damaging products stored below.


www.spillkit.eu

DB47

• For the storage of between 8 & 64 drums.

• Constructed from 2mm profiled mild steel sheet

over 100 x 50 x 3 mm RHS - welded for added strength.

• High & Low Level vents.

• Fully welded leakproof sump over entire base area.

• Removable galvanised grid shelves and flooring for easy cleaning.

• Two standard models available - sliding or shutter doors.

• All doors suitable for padlocks.

• 64 Drum units have doors on both sides.

• DB45 features double-hinged doors.

• Delivered ex works.

DB50 DB51

Allow 4 weeks delivery time for these items

Drum Storage Units - designed to prevent pollution & hazardous situations by containing accidental spills or leaks.

Sump Cap.

420 Litres

420 Litres

880 Litres

880 Litres

1,730 Litres

1,730 Litres

2,500 Litres

2,500 Litres

3,300 Litres

3,300 Litres

Weight

600 kg

600 kg

840 kg

840 kg

1,500 kg

1,500 kg

2,500 kg

2,500 kg

3,200 kg

3,200 kg

External Dimensions

1.5 (W) x 1.5 (L) x 3.1 (H) m

1.65 (W) x 1.5 (L) x 3.1 (H) m

1.65 (W) x 3 (L) x 3.1 (H) m

1.65 (W) x 3 (L) x 3.4 (H) m

1.65 (W) x 5.9 (L) x 3.1 (H) m

1.65 (W) x 5.9 (L) x 3.4 (H) m

1.65 (W) x 8.8 (L) x 3.1 (H) m

1.65 (W) x 8.8 (L) x 3.4 (H) m

3.1 (W) x 6.4 (L) x 3.1 (H) m

3.1 (W) x 6.4 (L) x 3.1 (H) m

Description

8 Drum Storage - Sliding Doors

8 Drum Storage - Roller Shutter









Part No.

DB45

DB46

DB47

DB48

DB49

DB50

DB51

DB52

DB53

DB54

Drum & Bulk Storage

26

www.spillkit.eu

• For the storage of between 4 & 24 standard IBC’s.

• Constructed from 2mm profiled mild steel sheet

over 100 x 50 x 3 mm RHS - welded for added strength.

• Fully welded leakproof sump over entire base area.

• High & Low Level vents.

• Two standard models available - sliding or shutter doors.

• All doors suitable for padlocks.

• Removable galvanised grid shelves and flooring for easy cleaning.

• 16 & 24 IBC units have doors on both sides.

• Delivered ex works.

DB55

DB58 DB59


IBC Storage Units - designed to prevent pollution & hazardous situations by containing accidental spills or leaks.

Part No.

DB55

DB56

DB57

DB58

DB59

DB60

DB61

DB62

DB63

DB64

Description

4 IBC Storage - Sliding Doors

4 IBC Storage - Roller Shutter









External Dimensions

1.65 (W) x 3 (L) x 3.35 (H) m

1.65 (W) x 3 (L) x 3.675 (H) m

1.65 (W) x 5.9 (L) x 3.35 (H) m

1.65 (W) x 5.9 (L) x 3.675 (H) m

1.65 (W) x 8.8 (L) x 3.35 (H) m

1.65 (W) x 8.8 (L) x 3.675 (H) m

3.1 (W) x 6.4 (L) x 3.35 (H) m

3.1 (W) x 6.4 (L) x 3.675 (H) m

3.1 (W) x 8.8 (L) x 3.35 (H) m

3.1 (W) x 8.8 (L) x 3.675 (H) m

Weight

1,298 kg

1,298 kg

2,200 kg

2,200 kg

2,500 kg

2,500 kg

3,500 kg

3,500 kg

4,100 kg

4,100 kg

Sump Cap.

1,125 Litres

1,125 Litres

2,000 Litres

2,000 Litres

3,000 Litres

3,000 Litres

4,050 Litres

4,050 Litres

6,300 Litres

6,300 Litres

Drum & Bulk Storage

27

Rev.:

091

9

Supplied by Oil Technics Ltd

Linton Business Park, Gourdon,Aberdeenshire, Scotland UK DD10 0NH

T: +44 (0) 1561 361515 F: +44 (0) 1561 361001E: [email protected] W: www.oiltechnics.com

Disclaimer: Every effort has been made to ensure that the information presented is correct at the time of publication. However, Oil Technics Ltd does not assume and hereby disclaims any liability to any party for any loss, damage, or disruption caused by errors or omissions. The data supplied is for guidance purposes only and is therefore without guarantee. Any opinions expressed in this publication are not necessarily those of Oil Technics Ltd and are not for onward publication without consent.

Flammable Liquid / Acid & Chemical Storage Cabinets - prevent pollution & hazardous situations by containing accidental spills.

• Constructed from Zintec coated steel - spot welded seams with gas welded corner joints.

• Reinforced vertical panel in doors - prevents heat distortion.

• Two point locking system.

• Fully adjustable shelves - maximum 45mm pitch.

• Perforated shelves for maximum drainage.

• Removable leakproof sump.

• Sump cover allows containers to be stored on top.

• Finished in Yellow Stove Enamel (Flammable) or White Full Epoxy Powder Coat (Chemical).

• All cabinets comply with HSG51, COSHH & current HSE regulations.

FLAMMABLE

LIQUIDS

ACIDS &

CHEMICALS

Drum & Bulk Storage


Flammable LiquidsPart No.

DB29

DB30

DB31

DB32

DB33

DB34

DB35

DB36

Description

Cabinet - single door

Cabinet - single door

Cabinet - double door






External Dimensions

458 (W) x 458 (L) x 762 (H) mm

458 (W) x 458 (L) x 915 (H) mm

306 (W) x 610 (L) x 610 (H) mm

483 (W) x 915 (L) x 712 (H) mm

483 (W) x 915 (L) x 915 (H) mm

483 (W) x 915 (L) x 1,200(H) mm

483 (W) x 915 (L) x 1,500 (H) mm

483 (W) x 915 (L) x 1,830 (H) mm

ChemicalsPart No.

DB29

DB30

DB31

DB32

DB33

DB34

DB35

DB36

Date post:	22-Nov-2023
Category:	Documents
Upload:	khangminh22
View:	0 times
Download:	0 times

SPILL KITS & CONTAINMENT SYSTEMS - Oil Technics

Documents