Date post: | 13-Nov-2023 |
Category: |
Documents |
Upload: | khangminh22 |
View: | 1 times |
Download: | 0 times |
Fosse Liquitrol provides the widest range of pollution control products and services specifically developed to assist companies prevent and cope with liquid spills and pollution.
Established in 1984, Fosse Liquitrol has become the industry’s ‘first choice’ for pollution control products. Our products deliver a blend of quality, performance, reliability and value for money. Our knowledge and expertise has assisted countless companies both in the UK and abroad, find practical, sensible and cost effective solutions to their pollution control requirements, helping them to meet their legal and moral obligations while contributing towards a cleaner, greener, environment. Our work with governmental and non-governmental organisations puts us at the forefront of pollution control, both in the UK and overseas.
Our Commitments to Pollution Control in Industry.
Commitment to the requirements of industry and the ability to innovate in products, services and technology is the key to the rapid development of Fosse Liquitrol. Fosse is a dynamic, privately
owned company with a string of awards for innovation in products and services.
Fosse Liquitrol is committed to supplying the pollution control market through our extensive distributor network. Our Technical Specialists work in close partnership with our network of approved distributors. Fosse Liquitrol has extended its distributor network into Europe, the Caucasus, the Gulf States, Singapore, Nigeria and South America.
Training and Education
Specific training for workers, accredited by the British Safety Industry Federation, is a key component of effective pollution control. Both 1st Responder Spill Awareness and Response, and Train The Trainer Courses are run throughout the territories in which Fosse Liquitrol operates.
Marine Oil Spill Response
Regulated by the International Marine Organisation (IMO) OPRc90 convention and accredited by The Nautical Institute on behalf of the MCA, the courses are provided fromTechnician to Executive Commander Levels.
Helping companies to overcome their pollution control challenges is our business.
Why Choose Us:q Our standards conform to BS 7959
q All spill response products are manufactured to BS EN ISO 9001:2015 quality standards
q We provide immediate supply of the highest performance and most cost-effective spill response products in the marketplace
q As a member of the Liquid Pollution Control Group: British Safety Industry Federation, Fosse Liquitrol is integrally involved in promoting industry best practice recommendations for oil and chemical spill response and spill containment and played an active role in the creation of the BS 7959 absorbent test standards.
q Accredited in November 2004 by the British Safety Industry Federation to deliver on-site 1st Responder and Spill Awareness Training Courses.
Simple and Effective range of absorbents
A cost effective absorbent that combines durability, versatility and performance. Ideal for use on all workplace spills and leaks. Manufactured from high quality melt blown polypropylene, it is tough and highly absorbent.
Performance and Endurance range of absorbents
The addition of a tough spun bonded cover sheet enhances strength and resilience, whilst reducing linting.
A higher loft yields increased absorbency and improved liquid retention. Spilchoice absorbents are ideal for use in tougher environments where superior performance is essential.
Range of secondary containment products, absorbent dispensing systems, drain protection, bio security mats, wheeled bins, bunded tanks, stores and super absorbent spill strips.
Leading manufacturer of spill containment, stormwater management, facility protection and construction compliance products. Ultratech leads the way with innovation, creativity, initiative and new product development.
Leading brand of chemical neutralisers designed for safe operator use, with built in pH indicators.
A globally recognised range of high quality spill containment products incorporating a host of innovative features.
Provide a flexible solution to the permanent or temporary containment of liquids.
User friendly method of spill containment designed to replace traditional drip trays. Able to withstand all weather conditions and rugged enough to stand machinery plant on all year round to contain any oil spills.
Absorbent dispensing systems for use with absorbent pads, rolls and socks, available in wall, bench and stand mounted formats. Provides a compact and convenient way of dispensing absorbents.
A DIVISION OF CARTIER CHEMICALS
9 Point Emergency Spill Response ProcedureEmergency Spill Plan for First Responders
1
2
3
4
56
7
8
9
PROTECT YOURSELF AND OTHERSUsing relevant personal protective equipment
CONTAIN THE SPILL
STOP THE SPILL
RE-ASSESS THE SITUATION AND ENSURE SPILL IS UNDER CONTROL
CLEAN UP THE SPILL
DECONTAMINATEYourself, Other People and any Equipment
REPORT ON THE SPILL
AFTER SPILL ANALYSISIdentify the cause and stop it happening again
ASSESS THE SITUATION
4
9 Point Emergency Spill Response ProcedureEmergency Spill Plan for First Responders
Contents
Prevention & Containment
Being Ready
Controlling A Spill
Training & Education
Site Survey Assessment
Compatability Charts
Index
115995
125133136138
Selection Guide6
5
Absorbents & Spill Kits Selection Guide
General maintenance oil and water
based solvents,
coolants and mild chemicals
Oil only based liquids, fuels, lubricants and hydrocarbon
based products
Aggressive chemicals,
acids, alkalis and
water
Internal and
External Use
Internal and
External Use
Internal and
External Use
Spilkleen Maintenance Simple & effective Excellent performance
Spilchoice Maintenance Excellent performance and endurance. Single & double sided spunbond cover options Suitable for heavy duty clean up operations
Spilkleen Oil & Fuel Simple & effective Excellent performance
Spilchoice Oil & Fuel Excellent performance and endurance. Single & double sided spunbond cover options Suitable for heavy duty clean up operations
Spilkleen Chemical Simple & effective Excellent performance
Spilchoice Chemical Excellent performance and endurance. Single & double sided spunbond cover options Suitable for heavy duty clean up operations
Chemical Neutralisation page 112
Vacuum Cleaner page 113
6
Type of liquids to be absorbed ?
Granules page 98
Pads page 100
Rolls page 102
Floor Rolls page 103
Cushions page 104
Socks page 106
Drum Topper page 38Granules page 98Pads page 100
Rolls page 102
Cushions page 104
Socks page 106 Marine Booms page 115
Marine Blanket page 117
Granules page 98
Pads page 100
Rolls page 102
Cushions page 104
Socks page 106
Pollution Control
Centre page 62
Dispensing
Systems page 110
Pollution Control
Centre page 62
Dispensing
Systems page 110
Pollution Control
Centre page 62
Dispensing
Systems page 110
Carry Bag page 63
Wheelie Bin page 64
Locker page 65
Carry Bag page 63
Wheelie Bin page 64
Locker page 65
Automotive page 68
Marine page 70
Carry Bag page 63
Wheelie Bin page 64
Locker page 65
Hazardous Material page 66
Laboratory page 67
7
EMERGENCY SPILL KITS
EMERGENCY SPILL KITS
EMERGENCY SPILL KITS
Containment Product Selection Guide
Spill Trays page 14
Work Floors page 16-17
Overpacks page 22-23
Sensor Activated
Draintector page 80-81
Drain Protection Automatic
Internal
External
Handling & Dispensing
Bunds & Tanks
Stores
Containment
Drum Spill Pallets & Covers page 18-21
IBC Spill Pallets & Covers page 24-27
Hardcovers page 21,27
Overpacks page 22-23
Trolley & Dolly page 38-40Drum Funnels & Lids page 39Drum Racking page 41 Gas Cylinders page 42Safety Cans page 43
Bunds/Berms page 29-36
Pop Up Pools page 29
Portable Tanks page 50-53
Storage Tanks page 54-55
Interceptor Alarm page 82-83
Drum page 20-21, 47-49
IBC page 27, 49
Gas Cylinder page 41
Cabinets page 44-46
Pollution Control Centre page 62
Pallet Box page 90
Bins page 91-92
8
Water Guard page 108
Mats page 122
Sacks page 123
Snake page 123
Roof Drip Diverters page 120 Containment
Absorbents
Flood Control
Sticky Back Floor Protection page 87
TAKmat page 87Internal
Disinfectant Floor Mats page 87
Vehicle - Avian,TB, Swine Flu Mats page 88
Railway Track Mat page 89
External
Floor Protection
and Bio Security
Other Primary Products Selection Guide
Witches Hat page 79
Plug Rugs page 84
Poly Covers page 84
Drain Plugs page 86
Gully Socks page 86
Spill Barrier page 86
Drain Protection
Manual
Inland Water & Marine
Protection
Containmentand Spill Control
Dewatering Bags page 114
Pipe Socks page 114
Fence Boom page 115-116
PVC Booms page 118
Inflatable Boom page 118
Boom Reels page 118
Oil Skimmer page 119
Vacuum System page 119
9
Prevention & Containment
r Spill Trays
r Work Floors
r Spill Pallets
r Overpacks
r IBC Spill Pallets
r Flexible Bunds
r Drum Handling
r Cabinets
r Bunded Stores
r Tanks
r Vehicle Wash
11
In the UK containers of oil or fuel cannot be stored outside unless they are correctly bunded in a secondary containment item (Oil Storage Regulations 2001). This means that if the container of oil leaks it will be contained within the bund. The secondary containment item must be able to hold a minimum of 25% of the total volume or 110% of the largest container whichever is the greater. If a company was to store 4 x 205 litres drums the pallet sump must be able to hold 225.5 litres of liquid.
Prevention & Containment
12
Spill trays - suitable for containing minor spills within the work place and for the safe storage of small containers of liquids.
Work floors - modular internal system designed for use as a liquid dispensing or decanting station within the working environment to contain any incidental spills.
Drum spill pallets - secondary containment systems designed to collect drips, spills or leaks from oil and chemical drums. These prevent the spread of any spilt liquids across the workplace floor and ensure safe working. Fully compliant with current UK Storage Regulations.
Overpacks - designed for the safe storage, containment and transportation of damaged and leaking chemical and fuel drums. Manufactured in accordance with UN packing regulations.
IBC spill pallets - secondary containment system designed to collect liquid drips, spills and leaks from Intermediate Bulk Containers. Fully compliant with current UK Storage Regulations.
Flexible bunds - provides a flexible and mobile means for fuel, chemical and water spill containment. They are widely used as temporary bunds for mobile plant and machinery.
Drum handling - drum handling and dispensing products designed to make the action and dispensation of liquids from drums around site as efficient and as safe as possible.
Cabinets - provide safe storage and segregation of chemicals, paints, flammable and hazardous substances as defined by COSHH guidelines.
Bunded stores - provide safe storage for 205 litre drums, 1000 litre IBCs and other smaller containers. A bunded store can help avoid potential spill hazards and environmental pollution by containing the total volume of liquid stored should a spill occur. Fully compliant with current UK Storage Regulations.
Tanks - manufactured in both polyethylene and steel, provide for the safe storage/dispensing of waste oil, heating oil, diesel, lubricants and coolants.
Vehicle wash - wash systems for cleaning the tyres of vehicles when they are exiting a construction site or restricted area to control and eliminate the pollution of public roads.
13
Spill TraysMADE INTHE UK
14
r FL-205-519
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL POLY SPILL TRAYS
FL-205-500 10L Spill Tray 574 x 390 x 53 10 0.9
FL-205-511 20L Spill Tray 600 x 400 x 155 20 2
FL-205-513 30L Spill Tray 805 x 405 x 155 30 3
FL-205-510 40L Spill Tray 800 x 600 x 155 40 3.5
FL-205-514 60L Spill Tray 1000 x 600 x 175 60 5
FL-205-515 100L Spill Tray 1200 x 800 x 175 100 6.5
FL-205-504 145L Spill Tray 1460 x 960 x 120 145 20
FL-205-505 230L Spill Tray 1310 x 910 x 380 230 16
FL-10-101 5L Spill Tray With Handles 490 x 580 x 35 5 1
SPILL KILL POLY SPILL TRAYS WITH GRID
FL-205-516 20L Spill Tray With Grid 600 x 400 x 155 20 3
FL-205-517 30L Spill Tray With Grid 805 x 405 x 155 30 4.5
FL-205-512 40L Spill Tray With Grid 800 x 600 x 155 40 6.5
FL-205-518 60L Spill Tray With Grid 1000 x 600 x 175 60 9
FL-205-519 100L Spill Tray With Grid 1200 x 800 x 175 100 14
ENPAC LAB TRAY*
EN-5248-YE 9.4L Lab Tray 630 x 550 x 70 9.4 1.7
SPILL KILL METAL SPILL TRAYS
FL-205-530 10L Metal Spill Tray 760 x 600 x 50 10 3.5
FL-205-531 20L Metal Spill Tray 915 x 600 x 50 20 4
FL-205-532 30L Metal Spill Tray 1200 x 760 x 50 30 6
r FL-205-532
r FL-205-531r FL-205-530
APPLICATIONr Lightweight, durable secondary containment spill trays
designed to contain any spilt liquids during refilling or transportation
FEATURES & BENEFITSr Poly trays manufactured from UV and chemical resistant
non-corroding polyethylene, available with or without gridr Metal trays manufactured from heavy gauge
galvanised steelr Ensures all liquid spills are retained within the bund r Makes decanting of liquids safer, cleaner, and more
manageabler Prevents the risk of slipping accidents to your employees
by eliminating drips and spills spreading over the working floor space
r FL-205-513
r FL-10-101 Complete with one Oil only pad
r EN-5248-YE
* Made In The USA
MADE INTHE USAMADE IN
THE USA
PREVENTION & CONTAINMENT
Drum Trays
APPLICATIONr Designed for the prevention of drips and leaks from
25 to 205 litre drums within the working environment
FEATURES & BENEFITSr Extremely tough, durable and lightweightr Manufactured from UV and chemically resistant non-
corroding polyethylener Ensures all liquid spills are retained within the bund
resulting in a clean, dry and safe work environmentr Ideal for use as a drum decanting stationr Suitable for both internal and external use
Code Description DimensionsL x W x Hmm
ContainmentCapacity Litres
Weightkgs
SPILL KILL DRUM TRAYS
FL-205-401 1 Drum 870 dia x 120H 50 3
FL-205-402 2 Drum 1460 x 960 x 120 145 12
ENPAC DRUM TRAY*
EN-8091-YE 1 Drum 860 dia x 190H 75.7 2.8
EN-8200-YE 25Ltr Pail 550 dia x 130H 28.3 0.9
15
r FL-205-401
r FL-205-402
* Made In The USA
r EN-8091-YE
MADE INTHE USAMADE IN
THE USA
MADE INTHE UK
r FL-205-404
PREVENTION & CONTAINMENT
Work Floors
16
APPLICATIONr Suitable for a liquid dispensing, decanting area
within a workshop
FEATURES & BENEFITSr Extremely tough and durabler Manufactured from chemical resistant, UV-stabilised
non-corroding polyethylener Removable heavy duty slip resistant platforms for easy
cleaningr Work floors can be placed together to create a working arear Ensures all liquid spills are retained within the bund
resulting in a clean, dry and safe work floor reducing the risk of any slips by employees
r Heavy duty access ramp available as an accessory
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL WORK FLOORS
FL-205-301 2 Drum 1600 x 800 x 150 112 24.5
FL-205-302 4 Drum 1600 x 1600 x 150 232 45
FL-205-303 4 Drum In line 2610 x 890 x 150 300 51
SPILL KILL WORK FLOOR RAMP
FL-205-304 Ramp 1290 x 810 x 180 15
r FL-205-302
r FL-205-304
MADE INTHE UK
PREVENTION & CONTAINMENT
APPLICATIONr Low-profile spill pallet allows you to customise a liquid
dispensing area in the workplace
FEATURES & BENEFITSr Tough, one-piece polyethylene construction that will
not rust or corroder Low profile drip and leak protectionr Large sump capacity catches incidental spills r Removable heavy-duty structural foam grates for
easy cleaningr Rolled-edge design helps resist cracking and warpager Multi-purpose ramp hooks onto the units for easy loadingr Link-Locks create a solid workspace by firmly attaching
the units together
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
ENPAC WORK FLOORS
EN-5117-YE 2 Drum 1350 x 720 x 140 83.2 17.3
EN-5116-YE 4 Drum 1350 x 1330 x 150 151.4 32
EN-5115-YE 6 Drum 1960 x 1350 x 150 230.9 46
EN-5110-YE 8 Drum 2540 x 1350 x 150 291.4 66.2
EN-5111-BK Work Ramp 1170 x 640 x 160 N/A 13.5
EN-5112-BK Link Locks Pair 240 x 180 x 190 N/A 1.3
17
Work FloorsMADE INTHE USAMADE IN
THE USA
PREVENTION & CONTAINMENT
Spill PalletsMADE INTHE UK
18
APPLICATIONr Bunded secondary containment product designed for the
storage of 205 litre drums within the working environment to contain any spills
FEATURES & BENEFITSr Constructed from chemical resistant UV-stabilised PEr Compatible with most forklifts, pallet and stacker trucksr Removable platform grid for easy cleaningr Platform with hand inserts and holes for inspection and
pump insertionr Resistant to a wide range of chemicals, will not corroder Stackable 4 drum model available for ease of storing
and shippingr Fully compliant with current UK Oil Storage Regulationsr Capacity meets/exceeds UK, European and US regulations
Code Description DimensionsD x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL SPILL PALLETS
FL-205-103 1 Drum 1000 x 680 x 600 230 19.5
FL-205-104 2 Drum 1300 x 750 x 440 250 20.5
FL-205-106 4 Drum In-Line 2445 x 660 x 270 235 34
FL-205-112 4 Drum Stackable 1460 x 1460 x 305 249 34
FL-205-107 8 Drum 2450 x 1450 x 575 1140 113
r FL-205-106
r FL-205-104
r FL-205-112
r FL-205-112
PREVENTION & CONTAINMENT
19
r GN-205-02
r GN-5260-TARP
r FL-5102-YE
r FL-5260-YE
r FL-5400-YE
Spill PalletsMADE INTHE USAMADE IN
THE USA
APPLICATIONr Bunded secondary containment pallets designed for the
storage of 205 litre drums
FEATURES & BENEFITSr Heavy duty construction manufactured from chemical
resistant UV-stabilised PEr Compatible with most forklift, pallet and stacker trucksr Suitable for transporting around site when emptyr Removable platform grid for easy cleaning of bundr Low-profile sidewalls for easy access to drumsr Resistant to most chemicals, will not corroder Optional ramps and tarpaulin covers availabler Fully compliant with current UK Oil Storage Regulations and
EPA 40 CFR 264.175, SPCC, UFC and NPDES
Code Description DimensionsD x W x H mm
ContainmentCapacity Litres
Weightkgs
ENPAC SPILL PALLETS
EN-5260-YE 2 Drum 1360 x 740 x 430 225 25.1
EN-5400-YE 4 Drum 1370 x 1370 x 300 250 41.4
EN-5102-YE 4 Drum In-Line 2490 x 640 x 300 250 37.9
ENPAC RAMPS
GN-205-01 Ramp for 2-drum 2500 x 1000 x 450 54
GN-205-02 Ramp for 4-drum 1750 x 1000 x 300 27
ENPAC TARPAULIN COVER
GN-5260-TARP 2 Drum Cover 1520 x 1000 x 1080 2.4
GN-5102-TARP 4 Drum In-Line Cover 2530 x 780 x 1090 4
GN-5400-TARP 4 Drum Cover 1440 x 1440 x 1120 3.2
PREVENTION & CONTAINMENT
NEW
Covered Spill PalletsHardcover Drum Storage
20
APPLICATIONr Secondary containment system designed
for the storage of 205 litre drums
FEATURES & BENEFITSr Prevents rainwater contaminating the bund
and avoids the need to pump outr Manufactured from tough and durable polyethylene
resistant to all weather conditionsr UV stabilised and chemical resistantr Designed to capture and contain any drips, leaks or spills
of fluidsr Removable platform grid for ease of cleaningr Compatible with most forklift, pallet and stacker trucksr Fully complies with current UK Oil Storage Regulations
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL COVERED SPILL PALLETS
FL-205-110 4 Drum Pallet Frame & Cover 1415 x 1310 x 1870 410 54
FL-205-207 8 Drum Pallet Frame & Cover 2560 x 1350 x 2210 1140 166
r FL-205-110
r FL-205-207
APPLICATIONr Provides safe secure storage for a single 205 litre drum
FEATURES & BENEFITSr Manufactured from tough and durable polyethylener Roll top, lockable cover for easy accessr Head space allows the use of drum pumps and funnelsr Upper body is easily removed to aid loading and
unloading of drumsr Forkliftable or easily moved around site on the optional
steel dollyr Complies with SPCC and EPA Container Storage
Regulations 40CFR264.175 and the current UK Oil Storage Regulations
r 5 year warranty against any manufacturing defects
Code Description DimensionsDia x H mm
ContainmentCapacity Litres
Weightkgs
ULTRATECH HARDTOP DRUM STORAGE
UL-143-410 Drum Hardtop Unit 915 x 1677 265 34
UL-143-424 Steel Dolly 674 x 127 16
r UL-143-410
Steel Dolly
r UL-143-424
MADE INTHE USAMADE IN
THE USA
MADE INTHE UK
PREVENTION & CONTAINMENT
Hardcover Drum Storage
21
APPLICATIONr Suitable for the secure storage of 205 litre
drums, chemicals, drum dispensing and hazardous waste
FEATURES & BENEFITSr Rigid, double walled chemical resistant
and weathertight PE constructionr Extremely robust and durabler Tall head space easily accomodates rotary
pump equipment and conical funnelsr Access to both sides (only one at a time)
via 2 x sliding shutter doorsr Unit can be padlocked r Forkliftable from both sides whilst emptyr Delivered fully assembled and
ready for user Manufactured in accordance
with current UK Oil Storage Regulations
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL HARDCOVER DRUM STORAGE
FL-205-108 2 Drum Hardcover 1565 x 995 x 2110 250 101.5
FL-205-109 4 Drum Hardcover 1565 x 1620 x 2110 485 158
FL-205-306 Ramp 1750 x 1000 x 300 38
r FL-205-109
r FL-205-306
r FL-205-108
APPLICATIONr Hardcover spill pallet containment system ideal for internal
or external storage of 205 litre drums
FEATURES & BENEFITSr Constructed from high density polyethylener Roll up lockable door r Two sided accessibilityr Removable grate for easy cleaning r Forklift pockets enable the units to be transported
around siter Manufactured in accordance with EPA 40 CFR 264.175
and the current UK Oil Storage Regulations r 5 year guarantee against manufacturing defects
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
ENPAC HARDCOVER DRUM STORAGE
EN-4060-YE 2 Drum Hardcover 1520 x 950 x 1840 225 95
EN-4064-YE 4 Drum Hardcover 1650 x 1740 x 1750 251 122
r EN-4060-YE
MADE INTHE USAMADE IN
THE USA
MADE INTHE UK
PREVENTION & CONTAINMENT
Overpacks
22
APPLICATIONr Storage and containment of damaged or leaking chemical and
fuel drums
FEATURES & BENEFITSr Excellent resistance against chemicals, acids, caustics and
corrosivesr Constructed from heavy duty 100% virgin polyethylener Screw-on-lids with air/water tight gasketr Ribbed design provides additional strengthr Nestable design and low tare weight allow convenient storage r Wheeled overpacks eliminate the need for dollies and have
built in handles for easy mobilityr All comply with UN Packaging Group 1 (X-Rating) and are
certified for use as DOT Salvage Drums, 49 CFR 173.3 (c)r 5 year guarantee against manufacturing defects
ENVIROSALV PLUSFEATURES AND BENEFITSr Four point locking system provides added security by locking
stacked salvage drumsr Easy lid twist-down closing with crush resistant seal r Ribbed design provides additional strength r Engineered shoulder design allows workers and material
handling equipment to move drums with easer Optional lock down kit provides a lockable, serialised
identification security systemr Certified to UN 1H2/X295/S, DOT 49 CFR 173.3 (c),
EPA, SPCC and NPDES
Code Description Dimensions Top Dia x Bottom Dia x Height mm
Containment Capacity Litres
Weight kgs
ENPAC OVERPACKS
EN-1220-YE Overpack 20 570 x 460 x 480 75.7 4.5
EN-1230-YE Overpack 30 570 x 460 x 760 113.5 6
EN-1065-YE Overpack 65 700 x 580 x 950 246 21
EN-1095-YE Overpack 95 800 x 650 x 1050 360 22
EN-1040-YE Overpack 110 800 x 650 x 1140 399 23
MADE INTHE USAMADE IN
THE USA
Code Description Dimensions Top Dia x Bottom Dia x Height mm
Containment Capacity Litres
Load Capacity Litres
ENPAC WHEELED OVERPACK SALVAGE DRUMS
EN-1259-YE Overpack 50 580 x 470 x 1150 189 125
EN-1299-YE Overpack 95 800 x 650 x 1210 360 113
ENPAC ENVIROSALV POLY SALVAGE DRUM PLUS
EN-1295-YE Envirosalv Drum Plus 812 x 660 x 1117 360 295
EN-1295-YK Envirosalv Lock Down Kit
PREVENTION & CONTAINMENT
r EN-1095-YE
r EN-1220-YE
r EN-1065-YE
r EN-1295-YE
r EN-1259-YE
r EN-1295-YK
Overpacks
23
APPLICATIONr Containment of damaged/leaking drums
FEATURES & BENEFITSr Excellent resistance against chemicals, acids, caustics
and corrosivesr Constructed from high density polyethylener Easy-to-close no tools required screw top lidr Nestable design and low tare weight allow convenient
storage and reduced transportation costsr Overpack models 20 and 30 have built in slots in order
that cable ties can be applied for added tamper resistancer All comply with UN Packaging Group 1 (X-Rating) and
are certified for use as DOT Salvage Drums, 49 CFR 173.3 (c).
r 5 year warranty
MADE INTHE USAMADE IN
THE USA
Code Description Dimensions Top Dia x Bottom Dia x Height mm
Containment Capacity Litres
Weight kgs
ULTRA OVERPACKS
UL-143-403 Overpack 20 552 x 451 x 489 76 5.5
UL-143-402 Overpack 30 581 x 457 x 765 113.5 7
UL-143-401 Overpack 65 737 x 533 x 921 247 18
UL-143-417 Overpack 95 820 x 648 x 1049 360 22
NEW
r UL-143-403
r UL-143-402
r UL-143-417
r UL-143-401
IBC Spill Pallets
24
APPLICATIONr Secondary containment units
designed to collect drips, spills and leaks from oil and chemical IBC’s reducing the risk of contamination
FEATURES & BENEFITSr Constructed from chemical
resistant UV-stabilised PEr Removable platform grid for easy
cleaning where applicabler Platforms have hand inserts and
holes for inspection and pump insertion
r Stackable options available for ease of storing and shipping
r Compatible with most forklift trucks
r Compliant with current UK Oil Storage Regulations
Code Description DimensionsD x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL IBC SPILL PALLETS
FL-205-210 Single Freestanding 1450 x 1450 x 1000 1120 74
FL-205-202 Single With Platform Grid 1450 x 1450 x 1000 1120 95
FL-205-211 Single Stackable With Platform Grid 1680 x 1680 x 700 1260 86
FL-205-201 Single Freestanding With Integral Dispensing Bucket 2000 x 1490 x 750 1120 91
FL-205-203 Double Freestanding 2300 x 1360 x 575 1238 75
FL-205-204 Double With Platform Grid 2560 x 1350 x 500 1140 115
FL-205-216 Double Stackable With Platform Grid 2260 x 1465 x 575 1200 116
FREESTANDING
WITH GRID
r FL-205-216
r FL-205-202
r FL-205-211
r FL-205-201
MADE INTHE UK
MADE INTHE UK
PREVENTION & CONTAINMENT
APPLICATIONr Designed to store, contain drips, spills and
leaks from IBCs reducing the risk of contamination
FEATURES & BENEFITSr Polyethylene construction will not rust, corrode or have adverse
reactions with chemicalsr Removable grates for easy cleaning r Integrated pail holder for quick and easy dispensingr 3629kg load capacity allows two IBCs to be safely stacked on
top of the sumpr Forklift channels for easy transportr Compliant with current UK Oil Storage Regulations
APPLICATIONr Integral debris strainer for safe
decanting of liquids into IBC tanks
FEATURES & BENEFITSr Manufactured from 100%
polyethylener Robust and easy to cleanr Compatible with all 1000 litre IBCsr 50mm spout for no spill decantingr Suitable for use with most
chemicals and oils
IBC Spill PalletsIBC Funnel and Lid
25
r EN-5469-YE
Code DimensionsDia x H mm
Weightkgs
SPILL KILL IBC FUNNEL & LID
FL-205-208 640 x 150 4
MADE INTHE UK
Code Description DimensionsD x W x H mm
ContainmentCapacity Litres
Weightkgs
ENPAC IBC SPILL PALLET
EN-5469-YE IBC Spill Pallet 2040 x 1850 x 750 1457 132
IBC Funnel and Lid
MADE INTHE USAMADE IN
THE USA
PREVENTION & CONTAINMENT
IBC Spill Pallet TarpaulinIBC Pallet Frame & Cover
26
APPLICATIONr Enables an IBC pallet to be stored outside without the risk
of the sump becoming contaminated with rainwater
FEATURES & BENEFITSr Fold-up work area maintains access to the valve
for dispensingr Weather resistant document pouchr Chemical resistant fabric for long life, even in full
UV exposurer Bungee straps along the bottom keep the tarpaulin in place
Code Description DimensionsL x W x H mm
Weightkgs
ENPAC TARPAULIN
GN-5469-TARP Single IBC Tarpaulin 2040 x 1830 x 1870 6.6
APPLICATIONr Protects the bund and IBC from the elements making it
ideal for outdoor storage
FEATURES & BENEFITSr Supplied complete with frame, roof and roll-up doorr Manufactured from tough and durable polyethylene
resistant to all weather conditionsr Base fork pockets provide easy loading onto a
forklift truck when emptyr UV stabilised and chemical resistantr Prevents rainwater contaminating the bund r Compliant with current UK Oil
Storage Regulations
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL IBC PALLET FRAME & COVERS
FL-205-206 Single Frame & Cover 1760 x 1350 x 2410 1100 119
FL-205-207 Double Frame & Cover 2560 x 1350 x 2210 1140 166
r FL-205-207r FL-205-206
r GN-5469-TARP
MADE INTHE USAMADE IN
THE USA
MADE INTHE UK
PREVENTION & CONTAINMENT
APPLICATIONr Weather-tight units designed for
the external storage of a standard 1000 litre IBC
FEATURES & BENEFITSr Manufactured from tough and
durable polyethylener Resistant to a wide range of
chemicals and severe weather conditions
r Upper roll top door and lower swing-out doors combine to allow easy and convenient access
r Unique, lockable, dual closure allows quick access to IBC tanks or drums
r Base unit includes fork pockets to allow easy loading with a forklift truck
r Compliant with current UK Oil Storage Regulations
r 5 year warranty
Hardcover IBC Spill Pallets
27
MADE INTHE USAMADE IN
THE USA
r UL-205-212
r UL-205-209
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
ULTRA HARDCOVER IBC STORAGE
UL-205-209 Single 1575 x 1639 x 2439 1382 240
UL-205-212 Double 1702 x 3251 x 2439 2025 484
PREVENTION & CONTAINMENT
Plant Nappies
28
MADE INTHE UK
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
PLANT NAPPIES
FL-93-101 Plant Nappy Small 500 x 685 x 70 2 1
FL-93-102 Plant Nappy Liner Small 460 x 645 x 10 2 0.5
FL-93-201 Plant Nappy Medium 1000 x 685 x 70 4.5 2
FL-93-202 Plant Nappy Liner Medium 960 x 645 x 10 4.5 1
FL-93-301 Plant Nappy Large 2000 x 1370 x 70 18 5
FL-93-302 Plant Nappy Liner Large 1960 x 1330 x 10 18 4
FL-94-401 Shoulder Bag Kit 1000 x 685 x 70 9 5
APPLICATIONr Designed to be placed under site equipment and machinery
allowing any spills of fuel and oil to be contained within the base whilst allowing clean water to escape
FEATURES & BENEFITSr Robust construction able to withstand all weather
conditionsr The mat can be placed on uneven ground or slight inclines
with no loss of performance r The base features a cushioned, non-slip surface which
prevents machinery moving r Lightweight and fully portable for ease of transportation
around siter Four securing tabs can be used in conjuction with pegs to
secure the mats in adverse weather conditionsr Any oil or fuel is contained within the base
allowing clean, uncontaminated water to pass through the side walls into the surrounding ground
r We would always recommend the use of a liner to prolong the life of the nappy
r Shoulder bag kit includes 1 x medium plant nappy, 2 x liners, 2 x pairs of disposable gloves 2 x disposable bags and ties, supplied in a heavy duty PVC carry case
FILTERWALLS
CLEANWATER
IMPERMEABLEBASE
PREVENTION & CONTAINMENT
Portable BundsPop Up Pool
29
APPLICATIONr Portable bund ideal for placing
generators, machinery, fuel and oil drums in when on site to contain any incidental spills of liquids
FEATURES & BENEFITSr Hard wearing robust PVC
constructionr Supplied with one liner ready
for immediate user Portable, lightweight and easily
moved around the site r Easily folded for storage when
not in user Replacement oil and fuel
pads available
Code Description External Dimensions L x W x H mm
Internal Dimensions L x W mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL MATE
FL-93-109 Standard Spill Kill Mate & Liner 720 x 640 x 80 500 x 400 19.5 0.93
FL-93-108 Replacement Standard Liners Pack of 25 500 x 400 2.2
FL-93-104 Large Spill Kill Mate & Liner 1220 x 920 x 80 1000 x 680 75 2.11
FL-93-106 Replacement Large Liner Single 1000 x 680 0.36
FL-93-107 Replacement Large Liner Pack of 10 1000 x 680 3.6
r FL-93-104
r FL-93-109
NEW
APPLICATIONr Ideal for containing liquid spills from damaged drums,
machinery, pipe work and as a decontamination pool
FEATURES & BENEFITSr No set-up required, simply shake and they instantly
expand for quick deploymentr Foam ring around the top perimiter rises with
the level of liquidr Extremely compact, folded units
require minimal storage space r Reusable after decontaminationr Excellent chemical, diesel fuel,
anti-freeze, acids, caustics and corrosives resistance
Code Description Dimensions
Dia x H mmContainmentCapacity Litres
Weightkgs
ULTRATECH POP UP POOL
UL-143-425 Pop up pool 889 x 204 76 1.5
UL-143-416 Pop up pool 1347 x 305 250 2
UL-143-427 Pop up pool 1638 x 305 379 2.5
MADE INTHE USAMADE IN
THE USA
30
APPLICATIONr Spill containment for vehicles, equipment and containers
FEATURES & BENEFITSr Manufactured from heavy duty PVCr Excellent chemical compatibilityr Foam side walls provide support but can be driven over r Compact and easy to deploy in the event of a spillr Bunds fold down after use for transport or storage
Code DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
ULTRATECH MINI FOAM WALL BUNDS
UL-143-428 600 x 600 x 152 57 1.5
UL-143-429 1200 x 1200 x 152 227 3
UL-143-430 1200 x 1800 x 152 284 4
Code DimensionsL x W x H m
ContainmentCapacity Litres
SPILL KILL PORTABLE BUNDS
FL-25-130 1 x 1 x 0.25 250
FL-25-131 1 x 2 x 0.25 500
FL-25-132 2 x 2 x 0.25 1000
FL-25-133 2 x 3.5 x 0.25 1750
FL-25-134 2.5 x 6 x 0.25 3750
FL-25-135 3.5 x 4.5 x 0.25 4000
APPLICATIONr Provides a flexible and mobile spill
containment. Widely used as bunds for mobile plant and generators, as a method of catching fuel and chemical spills or as a temporary measure for liquid storage
FEATURES & BENEFITSr Manufactured from chemical,
fuel and oil resistant materialsr Drop down walls facilitate easy
accessr Simple assembly, no tools requiredr Corrosion resistant and easy to clean r Durability, long lastingr Easy to transportr Meets environmental legislation
ISO 14001 and Oil Storage Regulations (OSR)
MADE INTHE USAMADE IN
THE USA
MADE INTHE UK
Mini Foam Wall BundsPortable Bunds
NEW
31
APPLICATIONr Suitable for wash down applications where contaminated
water must be collected, bunding of tanks and drums, construction site equipment and effluent, sewage and waste liquid catchment
FEATURES & BENEFITSr Manufactured from chemical, fuel and oil resistant materials r Simple assembly for quick and easy deployment, no tools
requiredr Pallets can be placed inside the bund for forklift optionsr Easy access drop down walls r Easily folds away after user Reusable, corrosion resistant and easy to cleanr Supplied in a heavy duty carry bagr Range of optional accessories availabler Bespoke custom sizes available r Meets environmental legislation ISO 14001 and current UK
Oil Storage Regulations (OSR)
ACCESSORIESGROUND SHEETr Provides protection to the bund from rough surfaces.
We would always recommend the use of a ground sheet
PROTECTIVE MATr Internal matting designed to reduce wear and tear on the
bund fabric when supporting heavy loads, or to allow vehicle access
OVERFLOW KITr In the event of a leak from a drum, the contents of the bund
can be safely discharged into another container from the valve
LINERr Provides additional protection against aggressive chemicals
and aids cleaning after use prolonging the life of the bund
Code DimensionsL x W x H m
ContainmentCapacity Litres
FASTANK PORTABLE BUNDS
FL-25-107 1 x 1 x 0.25 250
FL-25-108 1 x 2 x 0.25 500
FL-25-117 1.5 x 1.5 x 0.25 562
FL-25-109 2 x 2 x 0.25 1000
FL-25-116 2 x 3.5 x 0.25 1750
FL-25-110 2.5 x 3 x 0.25 1875
FL-25-111 2.5 x 6 x 0.25 3750
FL-25-112 3.5 x 4.5 x 0.25 4000
Mini Foam Wall BundsPortable Bunds
Portable BundsMADE INTHE UK
PREVENTION & CONTAINMENT
32
MADE INTHE USAMADE IN
THE USA
Foam Wall Portable Bunds
Code DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
ULTRATECH FOAM WALL BUNDS
UL-35-120 1800 x 2200 x 51 95 11
UL-35-121 2400 x 2800 x 51 208 14
UL-35-122 3000 x 3400 x 51 333 17
UL-35-123 1200 x 1800 x 102 223 12
UL-35-124 2400 x 2400 x 102 602 20
UL-35-125 3700 x 4900 x 102 1809 44
UL-35-126 3700 x 10047 x 102 3963 84
UL-35-127 3700 x 15200 x 102 5663 113
APPLICATIONr Suitable for drum and container containment, captures leaks
and spills from vehicles, machinery and tanks
FEATURES & BENEFITSr Low profile design allows easy accessr Soft foam sidewalls easily compress and regain shape for
vehicle accessr No set-up required, simply unfold for quick deploymentr Folded units require minimal storage spacer Manufactured from heavy duty PVC material to withstand the
rigors of industrial and construction applicationsr Bespoke sizes available r We would recommend a ground sheet/tarpaulin be placed
under the bund to provide additional protection against rough/sharp surfaces
PREVENTION & CONTAINMENT
APPLICATIONr Suitable for drum and container containment, captures leaks
and spills from vehicles, machinery and tanks
FEATURES & BENEFITSr Simply swivel the feet of the PVC supports to lower or raise
the walls to allow accessr Manufactured from heavy duty PVC r Bespoke sizes availabler We would recommend a ground sheet/tarpaulin be placed
under the bund to provide additional protection against rough/sharp surfaces
Collapsible Wall Bunds
33
MADE INTHE USAMADE IN
THE USA
Code DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
ULTRATECH COLLAPSIBLE WALL BUNDS
UL-143-431 1200 x 1800 x 305 678 12
UL-143-432 1800 x 1800 x 305 1018 14.5
UL-143-433 3000 x 3000 x 305 2831 26.5
UL-143-434 3700 x 9100 x 305 10190 64
UL-143-435 3700 x 15200 x 305 16989 102
UL-143-436 4600 x 15200 x 305 21234 116.5
NEW
r PVC Support
34
MADE INTHE USAMADE IN
THE USA
Rapid Rise BundsNEW
APPLICATIONr Captures leaks and spills from vehicles, machinery, tanks,
drums and IBC containers
FEATURES & BENEFITSr Sidewalls remain down during loading and unloading
minimising any trip hazardsr Vehicles and equipment can access the bund from any
angle r In the event of a spill the foam ring around the top
perimiter rises with the level of spilled liquidr Manufactured from PVC material to withstand industrial
applicationsr Bespoke sizes available r We would recommend a ground sheet/tarpaulin be placed
under the bund to provide additional protection against rough/sharp surfaces
Code DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
ULTRATECH RAPID RISE BUNDS
UL-34-100 1200 x 1800 x 305 678 14
UL-34-101 1800 x 1800 x 305 1018 17
UL-34-102 3000 x 3000 x 305 2831 31
UL-34-103 3700 x 7900 x 305 8831 68.5
UL-34-104 4600 x 15200 x 305 21234 137
UL-34-105 4600 x 20100 x 305 28028 175
Gorilla Containment Bund
35
MADE INTHE USAMADE IN
THE USA
APPLICATIONr Provides long term, high capacity spill containment for
machinery, vehicles, multiple IBCs and tanks
FEATURES & BENEFITSr Modular construction allows containment areas of any
size to be configured to suit customers requirementsr Creates a large, semi-permanent containment arear Easily dismantled and relocated r Polymer-coated foam support blocks (1829 x 406 x
152mm) provide structure to sidewalls and can be driven over repeatedly without damage
r Slots in top of foam blocks hold rebar (not included) and secures liner in place
r Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175 Spill Containment Regulations
r We would recommend a ground sheet/tarpaulin be placed under the bund to provide additional protection against rough/sharp surfaces
Code Description Dimensions L x W x Hmm
ULTRATECH GORILLA BUND COMPONENTS
UL-34-300 Wall section 1829 x 406 x 152mm
UL-34-301 Corner section 610 x 610 x 152mm
UL-34-302 Liner Liner per sq.m
Bund Dimensions L x W m
No of Wall Sections Required
No of Corners Required
Sq.m of Liner Required
Containment Capacity Litres
Weightkgs
2.1 x 4.0 6 4 38 1385 74.5
4.0 x 4.0 8 4 52 2517 100
4.0 x 7.6 12 4 72 4781 150.5
4.0 x 9.4 14 4 82 5917 176
4.0 x 13.1 18 4 113 8180 222.5
4.0 x 16.8 22 4 133 10444 2784.0 x 18.6 24 4 144 11580 3027.6 x 16.8 26 4 206 19847 393.59.4 x 16.8 28 4 238 24548 455.516.8 x 16.8 36 4 387 43351 681.5
NEW
36
Containment Wall SystemMADE IN
THE USAMADE INTHE USA
PREVENTION & CONTAINMENT
APPLICATIONr Provides long term, high capacity spill containment for
machinery, tanker vehicles, multiple IBCs and tanks
FEATURES & BENEFITSr Modular wall sections and corners can be easily assembled to
form almost any size shape spill containment area requiredr Heavy-duty, 30 mil, textured polyethylene liner provides rugged,
impermeable barrier to capture leaks and spillsr Creates large, semi-permanent containment area r Versatile system that can be easily dismantled and relocated to
other sitesr Unlike some containment systems, the Ultra-Containment wall
is not secured to the substrate so it is ideal for use in sand, mud, frozen and concrete areas
r The hard-walled, high-capacity spill containment system is ideal for multiple vehicle containment areas
r We would recommend a ground sheet/tarpaulin be placed under the bund to provide additional protection against rough/sharp surfaces
Code Description DimensionsL x W x H mm
Weightkgs
ULTRATECH CONTAINMENT WALL COMPONENTS
UL-34-200 Straight section 3048 x 305 x 305 15
UL-34-201 Corner section 559 x 559 x 305 4
UL-34-202 Straight section 2540 x 610 x 610 32
UL-34-203 Corner section 889 x 762 x 610 12
UL-34-204 Straight section 1829 x 610 x 914 27.5
UL-34-205 Corner section 762 x 762 x 914 16.5
UL-34-206 Textured Polyethylene Liner sq./m 0.45
Moulded-in locking pegs allow systems to be set-up quickly and easily without the need for special tools or equipment
Large clips (included) hold theliner in place. Excess liner canbe trimmed if desired
Code Dimensions L x W x H m Containment Capacity Litres
Weightkgs
ULTRATECH CONTAINMENT WALL SYSTEMS
UL-34-207 3.0 x 14.9 x 0.3 3978 342
UL-34-208 20.7 x 20.7 x 0.3 34802 937
UL-34-209 4.9 x 16.8 x 0.6 13716 826
UL-34-210 19.2 x 19.2 x 0.6 60089 1564
UL-34-211 3.4 x 16.8 x 0.9 14336 978
UL-34-212 18.6 x 18.6 x 0.9 83582 1795
ULTRATECH CONTAINMENT WALL COMPONENTS
UL-34-200 Straight section 3048 x 305 x 305mm 15
UL-34-201 Corner section 559 x 559 x 305mm 4
UL-34-202 Straight section 2540 x 610 x 610mm 32
UL-34-203 Corner section 889 x 762 x 610mm 12
UL-34-204 Straight section 1829 x 610 x 914mm 27.5
UL-34-205 Corner section 762 x 762 x 914mm 16.5
UL-34-206 Textured Polyethylene Liner sq/m 0.45
Construction Site Drip TraySafe Connect
37
APPLICATIONr Provides containment for trucks that
are offloading fluids but do not provide any spill protection at the connection point at the other end of the hose
FEATURES & BENEFITSr Polyethylene construction will not rust
or corroder Lockable for added securityr Unit is quickly and easily installedr Designed to be left in placer Hoses connect through the bulkhead
fitting in the back of the unit r All leaks and drips are captured
within the 11 litre sumpr Avoids any spilt liquids at transfer
that would have contaminated the ground
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
ULTRATECH SAFE CONNECT
UL-143-426 Safe-Connect 50mm collar 501 x 495 x 343 11 5.5
UL-143-437 Safe-Connect 75mm collar 501 x 495 x 343 11 5.5
Safe Connect
MADE INTHE USAMADE IN
THE USA
APPLICATIONr Containment of 205 litre drums of oils, fuels and
chemicals, construction plant and machinery
FEATURES & BENEFITSr Steel construction, suitable for heavy duty user Removable steel ambideck platform r Allows rainwater to pass through but holds back oil/fuel or water
based chemicals r Built-in overflow system ensures no oil escapes even in the event
of heavy rain fall r Sight gauge allows the user to monitor the oil level present r Clean water is passed through the interceptor
outlet hole and safely into the ground r Steel lifting slings for easy positioning on site r Requires no special filters or chemicals
Code DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
INTERCEPTOR DRIP TRAY
FL-205-130 1800 x 1200 x 450 648 175
FL-205-131 2400 x 1500 x 450 1080 220
FL-205-132 3000 x 1500 x 450 1350 280
FL-205-133 3600 x 1800 x 450 1944 330
Drip Tray
MADE INTHE UK
NEW
38
Drum TrolleysOil Only Drum ToppersMADE IN
THE UK
APPLICATIONr Designed for the safe transportation of drums and
containers around site
FEATURES & BENEFITSr Manufactured from tough and durable polyethylene r Four castors, two lockable provide stability r Sump to contain any leaks and spillsr Aids compliance with the UK Oil Storage Regulations
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL TROLLEYS
FL-205-602 Drum Dolly 725 dia x 990 30 15.5
FL-205-603 Trolley 1000 x 700 x 1000 100 15
ENPAC SPILL SCOOTER
EN-5205-YE Scooter 880 x 880 x 140 42 12
r FL-205-602
r FL-205-603
APPLICATIONr Drum pad toppers keep drums, and barrels clean and
protect the surrounding workplace
FEATURES & BENEFITSr Specifically designed for absorbing drips from leaking
pumps before they puddle up and run overr Will only absorb oil or hydrocarbon based liquids and oils r Water repellent properties mean these can be used
outdoors without becoming saturated in wet weatherr Manufactured with pre-cut holes to fit
56cm dia/205 litre drums
Code Dimensions Dia mm
Absorbency litres per unit
Quantity per pack
SPILKLEEN DRUM TOPPER
SK-02-101 560 3 25
SK-02-102 560 3 10
Drum Trolleys
Oil Only Drum Toppers
PREVENTION & CONTAINMENT
r EN-5205-YE
39
Drum LidsPREVENTION & CONTAINMENT
APPLICATION AND BENEFITSr Drum lids and funnels provide a simple cost effective solution
to collect liquids, keep the tops of drums dry and help prevent spills
r Manufactured from easy to clean polyethylene they are compatible for use with most liquids
Drum Lidr Prevents rainwater building up on top of a drum and then
causing contamination when the drum is opened
Drum Funnel & Lidr Suitable for use with most open or closed head
205ltr drums
Drum Funnelr Manufactured from 100% polyethylener No spill decanting
Universal Drum Funnelr Lightweight durable funnel r A wide mouth prevents drips, leaks, and splashes
Poly Drum Topperr Plastic topper easily snaps into place to prevent dirt, debris,
and other contaminants from collecting on the tops of drums
Code Description DimensionsDia x H mm
Weightkgs
SPILL KILL DRUM ACCESSORIES
FL-205-403 Drum Lid 650 x 70 4
FL-205-404 Drum Funnel & Lid 610 x 230 4
FL-205-405 Drum Funnel 870 x 240 5
ENPAC DRUM ACCESSORIES*
EN-3004-YE Universal Drum Funnel 660 x 140 1.4
EN-3065-YE Drum Topper 640 x 150 0.7
* Made In The USA
r FL-205-404
r EN-3004-YE
r EN-3065-YE
r FL-205-403
r FL-205-405
MADE INTHE USAMADE IN
THE USA
MADE INTHE UK
40
Poly DollyDrum Dolly
PREVENTION & CONTAINMENT
APPLICATIONr Multi-purpose dispensing station, drum
transporter and secondary containment system
FEATURES & BENEFITSr Rolled-grip handles for easy lifting
and kick plate for effortless tipping r Patented enclosed sumpr Drain plug for easy removal of liquid
from sump r Heavy duty strap to secure drumr Forkliftable from the rear r Optional tarpaulin cover for external use r Optional well liner for dispensing sumpr One-person operationr Manufactured from tough, polyethylener Ensures compliance with current UK Oil
Storage Regulations Code Description Dimensions
L x W x H mmContainmentCapacity Litres
Weightkgs
ENPAC POLY DOLLY
EN-5300-YE Poly Dolly 1750 x 810 x 670 265 43
GN-5300-TARP Tarpaulin Cover 1420 x 860 x 660 1.8
EN-6005-BK Well Liner 320 x 390 x 60 1.9 5
PATENTED ENCLOSED
SUMP
APPLICATIONr Designed for the safe dispensing and fully
bunded storage of 205 litre drums
FEATURES & BENEFITSr Double walled construction for optimum
strength and security against leaksr Easy to clean, liquid drains to the front r Rubber wheels r Castors with rotation and swivel braker Drum is secured with a ratchet strapr Vertical spill containment of up to 3 litresr Forkliftable from the rear r One-person operation, the safety support locks
into place for easy vertical loading and storager Manufactured from tough and durable
polyethylene r Ensures compliance with current UK Oil
Storage Regulations
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL BUNDED DRUM DOLLY
FL-205-601 Drum Dolly 1740 x 815 x 680 250 41
MADE INTHE USAMADE IN
THE USA
MADE INTHE UK
41
Drum Racking & Dispensing Bunds
PREVENTION & CONTAINMENT
DRUM RACK & BASEAPPLICATIONr Drum rack and base designed for the storage and safe
dispensation of steel and plastic 205 litre drums
FEATURES & BENEFITSr Manufactured from fully recycled, chemical resistant,
UV-stabilised PEr Ideal for easy and safe liquid dispensingr Compatible with most forklifts, remove drums before liftingr Do not use plastic drums at load-bearing levels
MULTI-USE CRADLE, FEATURES & BENEFITSr Multi-purpose drum cradle can be used to store a single
large drum or two smaller drums in a horizontal position making dispensing liquids quick and easy
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL DRUM RACK
FL-205-801 2 Drum Bund 1375 x 1350 x 635 450 46
FL-205-802 2 Drum Cradle 1375 x 940 x 390 25
SPILL KILL MULTI-USE CRADLE
FL-205-803 Multi-Use Cradle 875 x 765 x 730 10
ENPAC POLY RACK SYSTEM
EN-6000-YE Poly Rack Base 1240 x 1350 x 580 386 55
EN-6002-YE Poly Stack 1240 x 1040 x 320 25.3
EN-6003-YE Poly Shelf 430 x 560 x 440 4.6
r FL-205-802
r FL-205-801
r FL-205-803
r EN-6002-YE
r EN-6003-YE
r EN-6000-YE
MADE INTHE USAMADE IN
THE USA
MADE INTHE UK
42
Gas Cylinder Dollies & StandsDrum/Gas Cylinder Store
PREVENTION & CONTAINMENT
APPLICATIONr Suitable for the safe transportation of
gas cylinders
FEATURES & BENEFITSr Manufactured from non-corrosive, non-sparking
materials to help prevent fires and explosions when used with volatile gases
r Ergonomic handler Twin dolly features a built-in
tool tray for valves and torches
r Safety chain included
Code Description DimensionsL x W x H mm
Weightkgs
ENPAC GAS CYLINDER DOLLIES
EN-7301-CG Single Cylinder Dolly 622 x 565 x 1168 11.4
EN-7302-CG Two Cylinder Dolly 622 x 762 x 1168 25.8
APPLICATIONr Suitable for the safe and secure storage
of gas cylinders
FEATURES & BENEFITSr Manufactured from non-
corrosive, non-sparking materials to help prevent fires and explosions when used with volatile gases
r Safety chain included
Code Description DimensionsL x W x H mm
Weightkgs
ENPAC GAS CYLINDER STANDS
EN-7212-YE Two Cylinder Stand 711 x 355 x 762 6.35
EN-7213-YE Four Cylinder Stand 1040 x 736 x 1181 25.40
EN-7216-YE Uni Wall Bracket 390 x 160 x 80 0.5
APPLICATIONr Suitable for the safe containment of gas and oil/fuel drums
FEATURES & BENEFITSr Steel construction, ideal for external locationsr Security padlock fastening pointr High level shelfr Removable steel ambideck platformr Sight gauge allows the monitor of oil level present prior to disposalr Steel lifting slings for easy positioningr Clean water is passed through the interceptor outlet hole and safely into the groundr Built-in overflow ensures no oil escapes even in the event of heavy rain fall
Code DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
INTERCEPTOR DRUM GAS STORE
FL-205-146 1800 x 1200 x 2100 648 650
FL-205-147 2400 x 1500 x 2100 1080 750
MADE INTHE UK
MADE INTHE USAMADE IN
THE USAMADE INTHE USAMADE IN
THE USA
Safety Cans
43
APPLICATIONr Provide safe storage of flammable liquids and rags in the
workplace environment and laboratories
LIQUID DISPOSAL HDPE CANSr High density polyethylene provide superior chemical
resistance and leak protection. Spring-loaded sealed cap and large mouth opening. FM approved.
TYPE I STEEL SAFETY CANSr Manufactured from high-grade coated steel. Feature a
single opening for filling and pouring flammable liquids with a flame arrester which dissipates heat to stop flashback ignition. Certified by FM, UL/ULC and TUV, meet OSHA and NFPA requirements, 10 year warranty.
POLYPROPYLENE FUNNELr For use with Type I safety cans 4 Litre and above
TYPE II ACCUFLOW STEEL SAFETY CANSr Manufactured from high-grade coated steel with two
openings, one for filling and second opening with a flexible metal hose for smooth, accurate pouring. Flame arrester which dissipates heat to stop flashback ignition. Certified by FM, UL/ULC and TUV, meet OSHA and NFPA requirements, 10 year warranty.
OIL WASTE CANS r Oil waste cans for solvent soaked rags and combustible
waste. Lids open to a maximum of 60 degrees as required by UL and remain closed when not in use. Approved by FM, UL and TUV, 10 year warranty.
Code Description DimensionsDia x H mm
ContainmentCapacity Litres
JUSTRITE SAFETY CANS
FL-100-004 Liquid Disposal Can HDPE 305 x 375 7.5
FL-100-005 Liquid Disposal Can HDPE 305 x 508 19
FL-100-011 Type 1 Safety Can 122 x 210 1
FL-100-012 Type 1 Safety Can 241 x 279 4
FL-100-013 Type 1 Safety Can 298 x 292 9.5
FL-100-014 Type 1 Safety Can 298 x 429 19
FL-100-015 Poly Funnel 11202Y 13 x 286
FL-100-020 Type 11 Safety Can With Hose 241 x 267 4
FL-100-021 Type 11 Safety Can With Hose 241 x 337 7.5
FL-100-022 Type 11 Safety Can With Hose 298 x 305 9.5
FL-100-023 Type 11 Safety Can With Hose 298 x 445 19
FL-100-016 Oil Waste Can 302 x 403 20
FL-100-017 Oil Waste Can 354 x 464 34
FL-100-018 Oil Waste Can 408 x 514 52
FL-100-019 Oil Waste Can 467 x 595 80
MADE INTHE USAMADE IN
THE USA
r FL-100-011 r FL-100-020 r FL-100-023 r FL-100-014 r FL-100-015
r FL-100-004 r FL-100-005 r FL-100-019
r FL-100-018
PREVENTION & CONTAINMENT
44
MADE INTHE UK
Poly Storage Cabinets
APPLICATIONr Suitable for the safe storage of small containers of
chemicals and oils
FEATURES & BENEFITSr Manufactured from polyethylene for superior chemical
resistance and durabilityr Fitted with a lockable doorr Built-in sump to contain any liquid spillsr Removable shelves for versatility
Code DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
SPILL KILL POLY CABINETS
FL-99-001 534 x 420 x 990 30 15
FL-99-002 650 x 570 x 1650 70 44
FL-99-003 740 x 920 x 1520 100 55
FL-99-004 720 x 920 x 1835 225 60
r FL-99-001 r FL-99-002
r FL-99-003
r FL-99-004
PREVENTION & CONTAINMENT
Heavy Duty Hazardous Substance Storage Cabinets
45
APPLICATIONr Heavy duty cabinets for the safe storage of chemicals and
flammable liquids
FEATURES & BENEFITSr 1mm steel double wall construction r Self latching doors with non protruding handle for safetyr Fully welded constructionr High visibility yellow powder coat paint finishr Dual vents with flame arrestersr Manual or self closing doors r Leak proof containment sump and SpillSlope safety shelves r 10 minute fire tested at up to 1,300 degrees C r Internal temperature during fire test kept below the auto
ignition temperature of vast majority of flammable liquidsr Exceeds the Approved Code of Practice guidelines of DSEAR
2002, HSG51, 2015, FM approvedr Meets the requirements of HSG140, 2015r 10 year limited warranty
Code Description Number of Shelves
DimensionsW x D x H mm
ContainmentCapacity Litres
JUSTRITE HAZARDOUS SUBSTANCE STORAGE CABINETS
FL-82-006 1-Door Manual 1 432 x 203 x 559 N/A
FL-82-007 1-Door Manual 1 591 x 457 x 889 45
FL-82-008 1-Door Self Closing 1 591 x 457 x 889 45
FL-82-009 2-Door Manual 1 1092 x 457 x 1118 114
FL-82-010 2-Door Self Closing 1 1092 x 457 x 1118 114
FL-82-011 2-Door Manual 2 864 x 864 x 1651 227
FL-82-012 2-Door Self Closing 2 864 x 864 x 1651 227
MADE INTHE USAMADE IN
THE USA
r FL-82-011
r FL-82-006
r FL-82-009 r FL-82-007
r FL-82-010
NEW
APPLICATIONr Metal storage cabinets for the safe storage and segregation
of chemicals, paints, flammable and hazardous substances as defined by COSHH guidelines
FEATURES & BENEFITSr Constructed from high quality 0.9mm steel for extra rigidity
and to maintain structural integrity under extreme conditionsr All cabinets are designed to maintain a 30 minute fire ratingr The doors are rebated and secured by a three point
locking systemr Chrome lever handlesr Built-in liquid tight sump to contain any
drips or spillsr Shelves are adjustable every 34mm to
accommodate the storage of different sized containers
r Cabinets are finished in a high visibility yellow powder finish with appropriate safety labels
r Comply with the Highly Flammable Liquids and Liquefied Petroleum Gas Regulation 1972 and, where appropriate, the Health and Safety Executive Guide HSG51 and DSEAR 2002
Storage Cabinets
46
MADE INTHE UK
Code Description DimensionsW x D x H mm
ContainmentCapacity Litres
SPILL KILL CABINETS
FL-82-001 Single Door 459 x 459 x 610 15
FL-82-002 Single Door 459 x 459 x 915 15
FL-82-003 Double Door 915 x 459 x 712 30
FL-82-004 Double Door 915 x 459 x 915 30
FL-82-005 Double Door 915 x 459 x 1830 50
Hazardous Substance Storage Cabinets
Utility ShelterAPPLICATIONr Provides a highly visible shelter for safety and other
equipment on industrial sites, airports, agricultural and leisure sites
FEATURES & BENEFITSr Manufactured from fully recyclable, chemical resistant, UV
stabilised PEr Suitable for both internal and external applicationsr Pre-drilled fixing points secure the unit to the ground
(fixings not supplied)r Designated label area r Bespoke colour options available subject to 20 units
Code Description DimensionsW x D x H mm
Weight kgs
SPILL KILL UTILITY SHELTER
FL-205-160 Red Utility Shelter 1060 x 1595 x 1460 32.5
FL-205-161 Green Utility Shelter 1060 x 1595 x 1460 32.5
PREVENTION & CONTAINMENT
NEW
Eco Bunded Safety StoreExternal Drum Stores
47
APPLICATIONr Walk-in bunded store suitable for
chemicals, oils, paints and other liquids with the exception of corrosive acids
FEATURES & BENEFITSr Delivered fully assembled and ready to use
(available flat packed if required)r Removable, hot-dipped galvanised grid mesh
floor capable of holding 1000kg/m2 that covers the fully seam welded and leak tested sump
r Double lockable doors for security and easy access
r Fitted with forklift pockets and crane lifting points for easy re-location on site when empty
r High and low natural ventilationr Store can be racked out to maximise storage
space and for easy dispensation of productr No maintenance required, manufactured from
1.6mm fully galvanised corrugated steel to protect against corrosion
r Complies with current UK Oil Storage Regulations and EPA guidelines
r Ideal for use as a store for dispensing all types of pollution control equipment, these can be bespoke to customers own requirements and allow 24 hour access for products when required
Please note: This unit is not suitable for temperature sensitive liquids/chemicals or low flash point flammables
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
SPILL KILL BUNDED SAFETY STORE
FL-202-001 Bunded Safety Store 3080 x 2160 x 2247 1064
APPLICATIONr Provides secure external storage for 205 litre
drums of chemicals, oils, paints and other liquids
FEATURES & BENEFITSr Manufactured from 2mm sheet steel r Incorporates a built-in leakproof sumpr Up and over lid models have easy action gas spring assist
with padlockable hasp and staple doorr Lid and door models have easy action gas spring assist with
two point locking system doorsr Suitable for both pallet truck and forklift truck conveyancer Complies with current UK Oil Storage Regulations
Code Description DimensionsL x W x H mm
Number of Drums
ContainmentCapacity Litres
SPILL KILL EXTERNAL DRUM STORES
FL-49-014 Drum Store Up & Over Lid 1400 x 800 x 1440 2 250
FL-49-015 Drum Store Up & Over Lid 1400 x 1400 x 1440 4 300
FL-49-016 Drum Store Lid & Door 1400 x 800 x 1440 2 250
FL-49-017 Drum Store Lid & Door 1400 x 1400 x 1440 4 300
MADE INTHE UK
PREVENTION & CONTAINMENT
Hazard Hut Job Hut
48
APPLICATIONr Secondary external containment storage unit
designed to store hazardous materials
FEATURES & BENEFITSr Constructed as a one-piece unit from
polyethylene capable of containing most liquids
r Moulded side ventsr UV protection for increased durability when
stored in direct sunlightr Heavy duty double doorsr Allows storage for up to 4 x 205 litre drumsr Can be forklifted from all four sides for
transport around site when emptyr Low incline ramp available as an optional
accessoryr Manufactured in accordance with EPA 40
CFR 264.175 and UK Oil Storage Regulationsr 5 year guarantee against manufacturing
defects
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
ENPAC HAZARD HUT
EN-4000-YE Hazard Hut 1610 x 1730 x 1840 273 122
EN-4001-BK Ramp 3000 x 790 x 390 70 r EN-4000-YE
MADE INTHE USAMADE IN
THE USA
APPLICATIONr Secondary containment external storage store
for up to 8 x 205 litre drums
FEATURES & BENEFITSr One-piece secondary containment system
constructed from high density polyethylener Heavy duty double doorsr Forkliftable from front and rear when empty for easy
transport around siter UV protection for increased durability when stored
in direct sunlightr Requires no assembly r Ramp available as an optional accessoryr 5 year guarantee against manufacturing defects
Code Description Dimensions
L x W x H mmContainmentCapacity Litres
Weightkgs
ENPAC JOB HUT
EN-4010-YE Job Hut 2170 x 1560 x 2390 272 218
r EN-4010-YE
PREVENTION & CONTAINMENT
Drum StoresDual Purpose Drum/IBC Stores
49
MADE INTHE UK
APPLICATIONr Provides secure storage for 205 and 25 litre drums of
chemicals, oils, paints and other liquids
FEATURES & BENEFITSr Manufactured from 2mm sheet steelr Incorporates galvanised floor with leakproof sumpr Lockable sliding door r High and low natural ventilationr Finished in corrosion resistant paintr Suitable for forklift truck conveyance when emptyr Complies with current UK Oil Storage Regulations
Code DimensionsL x W x H mm
Number of Drums
ContainmentCapacity Litres
SPILL KILL DRUM STORES
FL-49-011 3000 x 1650 x 3100 16 880
FL-49-012 8800 x 1650 x 3100 48 2500
APPLICATIONr Designed for the storage of 205 litre
drums and 1000 litre IBCs.
FEATURES & BENEFITSr Constructed from 2mm profiled mild
steel sheet over 100 x 50 x 3mm RHS r Fully welded leakproof sump over entire
base area to a depth of 220mmr High and low level ventsr Upper and lower levels have support
bearersr Padlockable sliding doors (FL-49-007
and FL-49-008 have sliding doors on both long sides)
r Prevents environmental pollution and hazardous situations by containing accidental spills
r Comply with the Control of Pollution (Oil Storage) (England) Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2006, E.A. Guidance Note PPG26, The Health & Safety Executives Guidelines for the Storage Of Flammable Liquids HSG51 and current Health, Safety & Environmental regulations
r Storage units can be custom made to suit your storage requirements. Optional extras may include:- insulation, heating, temperature control, lighting and fire detection
Code DimensionsL x W x H mm
Number of Drums
Number of IBC
ContainmentCapacity Litres
SPILL KILL DUAL PURPOSE STORES
FL-49-002 2400 x 1650 x 3000 8 2 1023
FL-49-003 3350 x 3000 x 1650 16 4 1125
FL-49-005 3350 x 5900 x 1650 32 8 2000
FL-49-006 3350 x 8900 x 1650 48 12 3000
FL-49-007 3350 x 5900 x 3300 64 16 4000
FL-49-008 3350 x 8900 x 3300 96 24 6000
PREVENTION & CONTAINMENT
Portable Tanks
50
MADE INTHE UK
APPLICATIONr Suitable for the containment of leaks, liquid storage,
decontamination pool or over-splash protection area
FEATURES & BENEFITSr Manufactured from rip stop acrylic and vinyl coated
polyester fabricr Structural aluminium frame with stainless steel fittingsr Simple assembly for quick and easy deployment, no tools
requiredr Temperature resistant -20 to +80 deg Cr Reusable, corrosion resistant and easy to cleanr Easily folds away after user Supplied in a heavy duty carry bagr Range of optional accessories available include ground
mats, roof cover, decanting valve, anti-slip mat, hand pump, polythene liner, pipe kit, foot plates and support bar
r Bespoke custom sizes available r Meets environmental legislation ISO 14001 and
Oil Storage Regulations (OSR)
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
FASTANK PORTABLE TANK
FL-25-114 Rapide 1720 x 1670 x 600 1500
PREVENTION & CONTAINMENT
51
MADE INTHE UK
Portable Tanks
APPLICATIONr Provides a flexible solution to the permanent or temporary
containment of liquids including oil spill clean-up decontamination, effluent, water storage/treatment, farming aquaculture and emergency aid relief
FEATURES & BENEFITSr Manufactured from UV resistant 900gsm rip stop acrylic
and vinyl coated polyester fabricr Structural aluminium frame with glass filled nylon jointsr Simple assembly for quick and easy deployment, no tools
requiredr Adapts to uneven groundr Temperature resistant -20 to +80 deg Cr Reusable, corrosion resistant and easy to cleanr Easily folds away after user Supplied in a heavy duty carry bag
r Range of optional accessories available include ground mat, roof cover, decanting valve, hand pump, polythene liner and weatherproof storage box
r Meets environmental legislation ISO 14001 and Oil Storage Regulations (OSR)
Code Description DimensionsDia x H mm
ContainmentCapacity Litres
Weightkgs
FASTANK PORTABLE TANK
FL-25-118 FT1 1200 x 1250 1000 11
FL-25-119 FT3 1800 x 1250 3000 28
FL-25-120 FT5 2300 x 1250 5000 36
NEW
APPLICATIONr Provides a flexible solution to the permanent or temporary
containment of liquids including oil spill clean-up decontamination, effluent, water storage/treatment, farming aquaculture and emergency aid relief
FEATURES & BENEFITSr Manufactured from UV resistant rip stop acrylic and vinyl
coated polyester fabricr Structural aluminium framer Simple to assemble in under 5 minutes without the use of
tools r Adapts to uneven groundr Temperature resistant -30 to +80 deg Cr Reusable, corrosion resistant and easy to cleanr Easily folds away after user Supplied in a multipurpose Ezeebox
r Range of optional accessories available include ground mat, roof cover, decanting valve, hand pump, polythene liner and pipe saddle
r Meets environmental legislation ISO 14001 and Oil Storage Regulations (OSR)
Portable Tanks
52
MADE INTHE UK
Code Description DimensionsDia x H mm
ContainmentCapacity Litres
Weightkgs
FASTANK PORTABLE TANK
FL-25-121 1500 3200 x 1150 7500 56
FL-25-115 2000 3200 x 1500 10000 60
PREVENTION & CONTAINMENT
Portable Tanks Fuel Tank Water Soakers
53
MADE INTHE UK
APPLICATIONr Provides a simple and cost effective solution to on-site
oil contaminated water and suspended solids separation, temporary water storage and emergency containment
FEATURES & BENEFITSr Manufactured from UV resistant 900gsm rip stop acrylic
and vinyl coated polyester fabricr Structural aluminium framer Adjustable weir for improved separationr Reusable, corrosion resistant and easy to cleanr Simple to assemble r Temperature resistant -30 to +80 deg Cr Easily folds away after user Supplied in a carry bagr Range of optional accessories available include ground mat,
roof cover, decanting valve, hand pump, polythene liner and weatherproof storage case
r Meets environmental legislation ISO 14001 and Oil Storage Regulations (OSR)
Code Description DimensionsL x W x H mm
ContainmentCapacity Litres
Weightkgs
FASTANK PORTABLE TANK
FL-25-122 Cascade 3000 x 1700 x 600 3000 35.5
APPLICATIONr Ideal for use in commercial fuel tanks, domestic heating
oil tanks and bulk diesel tanks to prevent corrosion
FEATURES & BENEFITSr Condensation causes water to collect in the bottom of
fuel tanks which if not removed corrodes the inside of the tank
r Water soaker is lowered into the fuel tank and secured with the attached cord, the nylon bladder absorbs any water in the tank until fully expanded in the mesh filter leaving the fuel oil, diesel or petrol in the tank
r Simply leave the soaker in the tank until the bladder is full of water, then remove and replace
r We recommend the water soaker is checked and replaced every 3 months
Code Description DimensionsDia x L mm
Absorbency Capacity ml
SPILCHOICE WATER SOAKERS
FL-01-213 Water Soaker Mini 44 x 150 135
FL-01-210 Water Soaker Small 44 x 300 269
FL-01-211 Water Soaker Medium 56 x 300 489
FL-01-212 Water Soaker Large 100 x 300 1590
Fuel Tank Water Soakers
NEW
Polyethylene Bunded Tanks
54
MADE INTHE UK
WASTE OIL TANKSAPPLICATIONr Suitable for the storage of used oil only
FEATURES & BENEFITSr Strong, secure, corrosion resistant and
maintenance-freer Manufactured from UV stabilised high
grade polyethylener Lockable easy access lid r Compatible with latest electronic gaugesr Available in slimline, horizontal and
vertical options, 650 up to 10000 litresr Guaranteed for 10 years
OIL TANKSAPPLICATIONr Suitable for the storage of: Kerosene to
BS2869, Diesel being compliant with the requirements of BS EN 590:2009 and BS EN 14214:2008 including up to 93% Diesel and 7% Biodiesel mix including FAME at domestic, commercial and industrial premises
FEATURES & BENEFITSr Strong, secure, corrosion resistant and
maintenance-freer Manufactured from UV stabilised high
grade polyethylener Available in slimline, horizontal and
vertical options, 650 up to 10000 litresr Guaranteed for 10 years
FUEL DISPENSING TANKSAPPLICATIONr Suitable for the storage and dispensing of
diesel
FEATURES & BENEFITSr Strong, secure, corrosion resistant and
maintenance-freer Fitted with 230V pump, 4m delivery hose
with automatic shut off nozzle and clock type contents gauge
r Available in a range of sizes from 430 up to 5000 litres
r Guaranteed for 10 years
Slimline Horizontal Vertical
Slimline Horizontal Vertical
Mini Horizontal Vertical
PREVENTION & CONTAINMENT
55
MADE INTHE UK
Steel Bunded TanksBespoke tanks manufactured to order, please contact us for details
WASTE OIL TANKSAPPLICATIONr For the storage of waste engine oil,
cooking oil, coolants, lubricants etc in the manufacturing, agriculture and transport industries
FEATURES & BENEFITSr Lockable hinge lid/hatchr Suction tube for removal of oil by tanker r Tank contents and bund contents gauge r Range of sizes from 500 to 100,000 litresr Manufactured from premium grade steel r Guaranteed for 20 years
OIL TANKSAPPLICATIONr Bunded oil tanks suitable for the storage
of heating oil in above ground storage installations at agricultural, commercial, domestic, industrial premises
FEATURES & BENEFITSr Supplied with contents gauge and
bund gauger 2in BSP fill point including non-return
valve and capr 1in BSP bottom outlet complete with
gate valver Overfill prevention valver Range of sizes from 500 to 100,000 litresr Manufactured in accordance with
ISO 9001 r Guaranteed for 20 years
FUEL TANKSAPPLICATIONr Ideal for refuelling vehicles, machinery
and plant equipment, bulk storage of diesel, kerosene, or paraffin
FEATURES & BENEFITSr Clock contents gauge r Clock bund gauge r 2in BSP fill point including non-return
valve r Bund to atmosphere ventr Isolation valver Bespoke tanks available, please contact
us for detailsr Manufactured in accordance with ISO
90001:2000 and ISO 9001 certified r Guaranteed for 20 years
PREVENTION & CONTAINMENT
Bespoke tanks manufacturedto order
Bespoke tanks manufacturedto order
Bespoke tanks manufacturedto order
Wash Systems
56
MADE INTHE UK
APPLICATIONr Drive-through bath system designed to prevent the spread
of dirt and debris onto public highways from vehicles exiting construction sites
FEATURES & BENEFITSr Unpowered, non operator drive through steel fabricated
wash systemr Rumble strips shake off the heaviest earthr Water lagoon provides a quick, safe and effective cleaning
systemr Quick and easy to install and maintainr Can be elevated, placed directly onto a surfaced area with
ramps or excavated into the ground r External ramps, powered diesel and electric versions
available, details on request
Code Dimensions
Without Ramps L x W m
Dimensions With Ramps L x W m
Weightkgs
Max Load Capacity kgs
DRIVE THROUGH BATH
FL-205-138 10.67 x 3.65 22.86 x 3.65 648000 175000
APPLICATIONr Prevents unwanted transfer of hazardous materials when
working in contaminated areas including landfill, recycling, construction, mining and farming industries
FEATURES & BENEFITSr Steel construction r Single, pivoting plastic wash brush per bayr High quality rubber flexible hoser Heavy duty lifting/lashing pointsr Mains connectors (waste outlet and water inlet)r Quick and easy to install and maintainr Removable foot grate for easy cleaningr Helps employees clean their shoes and boots before entering any clean-zonesr Eradicates dirty footprints, premature wear and tear on carpets and flooring r Protects against trips and slips due to dirty/muddy footwear
Code Model DimensionsL x W x H mm
BOOT WASH
FL-205-142 3-Bay 1600 x 600 x 1153
FL-205-143 5-Bay 2660 x 600 x 1153
Vehicle Wash System
Boot Wash System
NEW
Concrete Washout System
57
MADE INTHE UK
Cement powder, workable concrete and grout are all extremely alkaline. Concrete contains chromium which is potentially polluting not only to watercourses but also to groundwater. Trucks, hoppers, mixers and concrete pumps that have contained concrete must be washed out in a contained area away from watercourses, surface water drains, grids and channels to prevent pollution.
APPLICATIONr Wash-down system for concrete mixer vehicles
FEATURES & BENEFITSr Separates the aggregate from the waste water allowing easy
recycling and disposalr Lightweight polypropylene chute resists cement adherencer Low maintenance, smooth surfaces, easy to cleanr Manufactured from fully recyclable, chemical resistant, UV
stabilised PEr Heavy duty design mouldings resist scuffs and knocksr Washdown any time, speeds up turnaround timer Can be retro fitted to a vehicler Prevents harmful washout water entering the drainage
systemr Complies with environmental requirements avoiding the risk
of contamination and fines
Code Dimensions L x W x Hmm
Capacity kgs
AWAYWASH CONCRETE WASHOUT SYSTEM
FL-205-150 1860 x 760 x 525 20
WASHAWAY
SYSTEM
NEW
Being Ready
r Pollution Control Centre
r Industrial Spill Kits
r Hazardous Material Spill Kits
r Vehicle Spill Kits
r Inland Water and Marine Spill Kits
r Signage
r Spill Kit Consumables
r Emergency Repair Products
r Drain Closure Systems
r Drain Covers
r Floor Protection and Mats
r Bins
59
Pollution Control Centre - Fully galvanised steel unit designed for storing and dispensing all types of pollution control equipment including liquids. These stores can be customised to suit your requirements and allow 24 hour access for products when required by employees in the event of a spill.
Absorbents
Maintenance - Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
Oil & Fuel - White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
Chemical - Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
Industrial spill kits - Designed to contain and clean up spillages and limit environmental damage. Allows you to effectively respond to any oil, chemical or general liquid spills. Range of carry bags, wheelie bins and lockers with different capacities capable of dealing with a spill under a worst case scenario.
Hazardous materials spill kits - Required when you are working with hazardous materials and chemicals. Kits contain a variety of absorbent materials used to contain and clean up an acid, chemical or body fluid spill.
Vehicle spill kits - Designed to clean up any spillages in the motor sports and commercial vehicle sector. Hauliers/transport companies of dangerous goods are obliged to provide their trucks with an ADR spill kit.
Being Ready
60
Inland water and marine spill kits - It is extremely important for boat owners to implement clean and safe boating practices when filling a fuel tank. Any splashes or spills may go directly into the water and impact on the environment.
The Ship Oil Pollution Emergency Plan (SOPEP) requires all cruise and cargo vessels to be equipped with spill kits.
Signage - Informative signage helps to protect the health and safety of employees and ensure good working practices.
Spill kit consumables - Hazardous waste bags, barrier tapes, wipes and gloves ensure your kits are fully maintained.
Emergency repair products - To enable an emergency repair to damaged pipes and leaking drums.
Drain closure systems - Provide instant security against the polluting of controlled waters. Operated manually or triggered by means of automatic sensors closure systems isolate part or the whole of a site ensuring the retention of spillages or fire-fighting run-off on site.
Drain covers - Prevents debris and liquid spills entering into the drainage systems and contaminating the sewer system or controlled waters.
Floor protection and mats - Specialised mats for the rail track industry, construction, clean room, food and drink, agricultural and meat producing sectors.
Bins - Wheelie bins, larger capacity waste bins and grit bins suitable for industry.
61
Pollution Control Centre
62
APPLICATIONr Walk-in bunded store suitable for storing and dispensing all
types of pollution control equipment including liquids
FEATURES & BENEFITSr Delivered fully assembled and ready for use (available flat
packed if required)r Removable, hot-dipped galvanised grid mesh floor r Seam welded sumpr Double lockable doors for security and easy accessr Fitted with forklift pockets and crane lifting points for easy
relocation on site when empty if requiredr High and low natural ventilationr Unit can be racked out to maximise storage space and for
easy dispensation of productr No maintenance required, manufactured from 1.6mm fully
galvanised corrugated steel to protect against corrosionr Facilitates 24 hour access for products when required by
employees r Complies with current UK Oil Storage Regulations and EPA
guidelinesr Product can be bespoke to customers own specific site
requirements and quantities
Please note: This unit is not suitable for temperature sensitive liquids/chemicals or low flash point flammables
Code Description DimensionsL x W x H mm
SPILL KILL POLLUTION CONTROL CENTRE
FL-202-001 Pollution Control Centre 3080 x 2160 x 2247
NEW
Portable Spill KitsMADE INTHE UK
63
Code Application
Absorbency Litres Capacity
A - SPILKLEEN SINGLE USE
SK-100-108 Maintenance 10
SK-100-208 Oil And Fuel 10
SK-100-308 Chemical 10
B - SPILKLEEN CLIP HANDLE BAG
SK-100-101 Maintenance 15
SK-100-201 Oil And Fuel 15
SK-100-301 Chemical 15
SK-100-102 Maintenance 25
SK-100-202 Oil And Fuel 25
SK-100-302 Chemical 25
C - SPILKLEEN PVC CARRY BAG
SK-100-103 Maintenance 35
SK-100-203 Oil And Fuel 35
SK-100-303 Chemical 35
APPLICATIONr Portable, easy to carry emergency
spill kits offer an effective and immediate response to spills of oils, chemicals and hazardous liquids
FEATURES & BENEFITSr Absorbents manufactured from high
quality melt blown polypropylener Suitable for all workplace liquid
spills and leaksr Simple to store, handle and deployr Ideal kits for when you are on the
mover Available in maintenance, oil and
fuel and chemical versionsr Comply with BS 7959 and ISO
9001:2008 standards
Code Application Absorbency Litres Capacity
D - SPILKLEEN PVC SHOULDER BAG
SK-100-104 Maintenance 50
SK-100-204 Oil And Fuel 50
SK-100-304 Chemical 50
E - SPILKLEEN CLEAR PVC CARRY BAG
SK-100-109 Maintenance 28
SK-100-209 Oil And Fuel 28
SK-100-309 Chemical 28
SK-100-105 Maintenance 70
SK-100-205 Oil And Fuel 70
SK-100-305 Chemical 70
A B C
D E
Wheelie Bin Spill KitsMADE INTHE UK
64
Code Application Absorbency Capacity Litres
SPILKLEEN WHEELIE BIN SPILL KITS
SK-142-101 Maintenance 80
SK-142-201 Oil And Fuel 80
SK-142-301 Chemical 80
SK-142-102 Maintenance 120
SK-142-202 Oil And Fuel 120
SK-142-302 Chemical 120
SK-142-103 Maintenance 240
SK-142-203 Oil And Fuel 240
SK-142-303 Chemical 240
SK-142-104 Maintenance 360
SK-142-204 Oil And Fuel 360
SK-142-304 Chemical 360
APPLICATIONr Suitable for workshops, warehouses, maintenance operations and manufacturing
facilities to contain and clean up spills of oils, chemicals and hazardous liquids
FEATURES & BENEFITSr Supplied as a complete kit in a highly visible yellow mobile wheeled bin that allows
it to be positioned wherever requiredr Absorbents are manufactured from high quality melt blown polypropylener Suitable for everyday workplace liquid spills and leaksr Provides a quick response to any spills as can be wheeled to spill locationr Available in maintenance, oil and fuel and chemical versionsr Fully compliant with BS7959 and ISO 9001:2008 standards
8OL COMPACT SPILL KIT
SPILL KIT REFILL PACKS AVAILABLE FOR ALL WHEELED & STATIC KITS, ADD RF TO THE PRODUCT CODE
BEING READY
Static & Wheeled Spill Kits MADE IN
THE UK
65
Code Application Absorbency Capacity Litres
SPILKLEEN WHEELIE BIN SPILL KITS
SK-142-101 Maintenance 80
SK-142-201 Oil And Fuel 80
SK-142-301 Chemical 80
SK-142-102 Maintenance 120
SK-142-202 Oil And Fuel 120
SK-142-302 Chemical 120
SK-142-103 Maintenance 240
SK-142-203 Oil And Fuel 240
SK-142-303 Chemical 240
SK-142-104 Maintenance 360
SK-142-204 Oil And Fuel 360
SK-142-304 Chemical 360
Code Application Absorbency Capacity Litres
SPILKLEEN PAIL SPILL KITS
SK-100-106 Maintenance 65
SK-100-207 Oil And Fuel 65
SK-100-307 Chemical 65
SPILKLEEN TROLLEY SPILL KITS
SK-141-101 Maintenance 70
SK-141-201 Oil And Fuel 70
SK-141-301 Chemical 70
SPILKLEEN BIN SPILL KITS
SK-201-101 Maintenance 90
SK-201-201 Oil And Fuel 90
SK-201-301 Chemical 90
SPILKLEEN STATIC LOCKER SPILL KITS
SK-141-102 Maintenance 240
SK-141-202 Oil And Fuel 240
SK-141-302 Chemical 240
SK-201-102 Maintenance 350
SK-201-202 Oil And Fuel 350
SK-201-302 Chemical 350
SK-201-103 Maintenance 1200
SK-201-203 Oil And Fuel 1200
SK-201-303 Chemical 1200
APPLICATIONr Suitable for workshops, warehouses,
maintenance operations and manufacturing facilities to respond efficiently and effectively to large spills of oils, chemicals and hazardous liquids
FEATURES & BENEFITSr Supplied as a complete kit r Suitable for internal and external
locationsr Absorbents are manufactured
from high quality melt blown polypropylene
r Suitable for everyday workplace liquid spills and leaks
r Provides a quick response to any spills
r Available in maintenance, oil and fuel and chemical versions
r 1200 litre drop front models facilitate easy access to the absorbent products for fast and effective deployment
r Fully compliant with BS7959 and ISO 9001:2008 standards
Code Application Absorbency Capacity Litres
SPILKLEEN WHEELED LOCKER SPILL KITS
SK-141-103 Maintenance 350
SK-141-203 Oil And Fuel 350
SK-141-303 Chemical 350
SK-141-104 Maintenance 660
SK-141-204 Oil And Fuel 660
SK-141-304 Chemical 660
SK-141-106 Maintenance 1200
SK-141-206 Oil And Fuel 1200
SK-141-306 Chemical 1200
SPILKLEEN DROP FRONT WHEELED LOCKER SPILL KITS
SK-141-105 Maintenance 1200
SK-141-205 Oil And Fuel 1200
SK-141-305 Chemical 1200
Wheeled Locker
Spill Bin
Static Locker
Trolley
Wheeled Drop Front
Lid Lock Brake
BEING READY
Hazardous Material Spill KitsMADE IN
THE UK
66
APPLICATIONr Suitable for use in FLT charging areas and power pack back up rooms
FEATURES & BENEFITSr Supplied as a complete kit r Formulated for the containment, neutralisation and clean up of battery acidr Decontaminates the affected area and quickly returns it to a workable
conditionr After neutralisation, residues of acid spill are environmentally benign and
can be disposed of as general waster Manufactured to BS7959 and ISO 9001:2008 standards
Code Description Absorbency Capacity Litres
SPILKLEEN BATTERY ACID SPILL KIT
FL-204-001 Battery Acid Spill Kit 32
Battery Acid Spill Kit
APPLICATIONr Suitable for the containment and disposal of hazardous mercury
spills up to 40ml
FEATURES & BENEFITSr Supplied as a complete kit r Minimises the toxic effects of mercury in two ways by converting
liquid mercury into a solid amalgamr Protects against mercury vapours by binding liquid mercury and
absorbing mercury vapours from the airr COSHH recommended systemr Full compliance with CQC (Care Quality Commission) outcomes in
UK and HSE inspections
Code Description Absorbency Capacity Litres
SPILKLEEN MERCURY SPILL KIT
FL-204-002 Mercury Spill Kit 0.25
Mercury Spill Kit
APPLICATIONr Deal with spills that pose a sanitary or
infectious hazard and are very unpleasant to clean, suitable for use on vomit, urine, excrement and blood
FEATURES & BENEFITSr Supplied as a complete kit r Sterilises potentially infectious fluidsr Available with or without Super Sani-Cloth
Wipes that kill pathogens in 2 minutes or less
Code Description Absorbency Capacity Litres
SPILKLEEN BODY FLUID SPILL KIT
FL-204-004 Body Fluid Spill Kit Without Wipes 10
FL-204-005 Body Fluid Spill Kit With Wipes 10
Body Fluid Spill Kits
BEING READY
Laboratory Spill KitsMADE INTHE UK
67
Code Description Absorbency Capacity Litres
SPILKLEEN BODY FLUID SPILL KIT
FL-204-004 Body Fluid Spill Kit Without Wipes 10
FL-204-005 Body Fluid Spill Kit With Wipes 10
Code Application
LABORATORY EMERGENCY SPILL KITS
SC-100-311 Formaldehyde
SC-100-312 Multi-Purpose Acid, Caustic & Solvents
SC-100-313 Acid
SC-100-314 Caustic
SC-100-315 Solvent
SC-100-316 Mercury
Formaldehyde spill kit Contents include 6 x 950ml FNC neutraliser, 6 x 50ml activator, 1 x 200gm absorbent and immobiliser, 1 x absorbent pad, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles. Supplied in a PVC yellow carry case
Multi-purpose acid, caustic and solvent spill kit Contents include 2 x 1kg acid neutraliser, 2 x 0.9kg alkali neutraliser, 3 x absorbent pads, 1 x dustpan and brush, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles. Supplied in a PVC yellow carry case
Acid spill kit Contents include 6 x 1kg acid neutraliser, 1 x absorbent pad, 1 x dustpan and brush, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles. Supplied in a PVC yellow carry case
Caustic spill kit Contents include 6 x 0.9kg neutraliser, 1 x absorbent pad, 1 x dustpan and brush, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles Supplied in a PVC yellow carry case
Solvent spill kit Contents include 6 x 10g granules, 1 x absorbent pad, 1 x dustpan and brush, 6 x disposal bags c/w ties, 1 x chemical gloves, 1 x safety goggles Supplied in a clip handle bag
Mercury spill kit Contents include 1 x 750gm mercury neurtraliser, 1 x 180gm mercury vapour suppressant, 2 x clean-up pads, 2 pairs chemical gloves, 1 x dust mask, 1 x over shoes, 3 x mini syringes, 3 x disposal bags, 1 x collector pan and brush Supplied in a clear plastic case
APPLICATIONr Suitable for the containment, clean-up and disposal of acid, caustic,
Formaldehyde, mercury and solvent spills
FEATURES & BENEFITSr Specific chemical spill treatment kits designed for use in laboratoriesr Fast acting treatment, less time exposed to spilled chemicalsr Minimises the toxic effects of the spillr Shaker bottle provides easy to pour on spill, free flowing neutraliserr Colour indicator shows when neutralisation is completer Ease of disposal, residue forms into small clumps, easy to clean-up and disposer Portable, bright yellow carry cases can be easilly taken to the spill
r SC-100-311 r SC-100-313 r SC-100-315
r SC-100-312 r SC-100-314 r SC-100-316
NEW
Vehicle Spill KitsMADE INTHE UK
68
APPLICATIONr Specifically designed for tankers, easy to deploy, use and
store within the vehicle
FEATURES & BENEFITSr For use on medium sized spills of oil based liquids such as
fuels, lubricants and other hydrocarbon based productsr Absorbents are manufactured from high quality melt blown
polypropylene r Supplied in a carry bag r Complies fully with BS 7959 and ISO 9001:2008
standards
Tanker Spill Kit
Code Description Absorbency Capacity Litres
SPILKLEEN TANKER SPILL KIT
SK-100-211 Tanker Spill Kit 30
APPLICATIONr Designed to assist haulage contractors meet the ADR
obligations when transporting hazardous fluids
FEATURES & BENEFITSr Contains PPE and absorbents required to contain, absorb
and clean up spills in accordance with the European Agreement concerning the International Carriage of Dangerous Goods by Road (ADR 2017)
ADR Spill Kit
Code Description Absorbency Capacity Litres
SPILKLEEN ADR SPILL KIT
FL-204-023 ADR Spill Kit 15
BEING READY
Vehicle Spill KitsMADE INTHE UK
69
APPLICATIONr Suitable for use anywhere a forklift truck is in operation
FEATURES & BENEFITSr Supplied as a complete kit in a compact, waterproof bag r Mounted on to the back of forklift trucks using a Velcro strip
with an adhesive backingr Absorbents are suitable for use on non-aggressive oil and
water based liquidsr Complies fully with BS 7959 and ISO 9001:2008
standards
Forklift Truck Spill Kit
Code Description Absorbency Capacity Litres
SPILKLEEN FORKLIFT TRUCK SPILL KIT
SK-100-401 Forklift Truck Spill Kit 12
APPLICATIONr For use within the motor sport
industry to comply with 2011 motor sport association regulations
FEATURES & BENEFITSr Manages spills of automotive fluids,
gasoline, lubricating oil, coolants, grease and hydraulic oils
r The standard spill kit is supplied in a grip seal bag
r The deluxe spill kit is supplied in a tough, compact carry bag with an adhesive back to secure the spill kit inside the vehicle
r Fully conforms to and exceeds MSA J:5.20.13 regulations
Motor Sports Association Spill Kits
Code Description Absorbency Capacity Litres
SPILKLEEN MOTOR SPORT ASSOCIATION SPILL KITS
SC-100-001 MSA Standard Spill Kit 2
SC-100-002 MSA Deluxe Spill Kit 2
r SC-100-001
r SC-100-002
BEING READY
Boat Spill KitsMADE INTHE UK
70
APPLICATIONr It is extremely important for boat owners to implement
clean and safe boating practices when filling a fuel tank. Accidental overflows, splashes and spills may go directly into the water and impact on the environment.
FEATURES & BENEFITSr Supplied in handy bags which can be easily stored onboard
and available when requiredr Provides a solution when responding to a spill or a leakr Protects the environment and personnel safety
Single use kit small boat Contents include 10 x absorbent pads 15 x 48cm, gloves, disposal bag and tie. Supplied in a clear clip handle bagPoly bag kit medium boat Contents include 10 x absorbent pads 40 x 35cm, 2 x absorbent cushions, gloves, disposal bag and tie. Supplied in a clear clip handle bag Deluxe PVC holdall kit medium boat Contents include 10 x absorbent pads 40 x 35cm, 2 x absorbent cushions, gloves, disposal bag and tie. Supplied in a yellow PVC carry case
r SK-100-212 r SK-100-213 r SK-100-214
Code Description Absorbency Capacity Litres
SPILKLEEN BOAT SPILL KITS
SK-100-212 Single Use Kit Small Boat & Jet Ski 2.5
SK-100-213 Poly Bag Kit Medium Boat 10
SK-100-214 Deluxe PVC Holdall Kit Medium Boat 10
We would always recommend the use of a fuel absorbent pad around the fuel filler to catch any spills
NEW
MADE INTHE UK
71
Marine SOPEP Spill KitsFuel Tank Water Soakers
APPLICATIONr Condensation builds in fuel tanks but is
especially prevalent in the marine sector
FEATURES & BENEFITSr The water soaker lays at the bottom of the
fuel tank and removes any water build up r When water is absorbed the nylon bladder
expands into the mesh containment tuber Helps to improve longevity of the engine and
avoid expensive repairsr We recommend the water soaker is checked
and replaced every 3 months
Code Description DimensionsDia x L mm
Absorbency Capacity ml
SPILCHOICE WATER SOAKERS
FL-01-213 Water Soaker Mini 44 x 150 135
FL-01-210 Water Soaker Small 44 x 300 269
FL-01-211 Water Soaker Medium 56 x 300 489
FL-01-212 Water Soaker Large 100 x 300 1590
APPLICATIONr The Ship Oil Pollution Emergency Plan (SOPEP) requires
all cruise and cargo vessels to be equipped with an oil only spill kit
FEATURES & BENEFITSr Supplied as a complete kit with all the products required to
deal with a spillr Oil selective Hydrophobic absorbents only absorb oils and
repel waterr Rapid absorptionr Fully conform with the Marpol Convention standards
Code Description IMPA Code Absorbency Capacity Litres
SPILKLEEN SOPEP SPILL KITS
SK-141-014 Portable Bag 232516 120
SK-141-013 Locker 1.5 Barrel 256
SK-141-012 Locker Standard 600
SK-141-011 Locker 7 Barrel 232531 1100
SK-141-010 Locker 12 Barrel 232532 1900
r SK-141-014
r SK-141-013
r SK-141-012
Fuel Tank Water Soakers
BEING READY
NEW
Safety SignsMADE INTHE UK
73
Code Ref Description
SPILL KILL SIGNS
FL-123-017 A Spill Kit Aggressive Fluids (Hazchem) RP
FL-123-009 A Spill Kit Aggressive Fluids (Hazchem) SAV
FL-123-013 B Spill Kit Non Aggressive Fluids RP
FL-123-005 B Spill Kit Non Aggressive Fluids SAV
FL-123-016 C Spill Kit Oil Only RP
FL-123-008 C Spill Kit Oil Only SAV
FL-123-015 D Spill Kit For Emergency Spill Team Only RP
FL-123-007 D Spill Kit For Emergency Spill Team Only SAV
FL-123-014 E Spill Protective Equipment RP
FL-123-006 E Spill Protective Equipment SAV
FL-123-018 F Emergency Spill Kit RP
FL-123-019 F Emergency Spill Kit SAV
FL-123-022 G Emergency Oil Spill Kit RP
FL-123-023 G Emergency Oil Spill Kit SAV
APPLICATIONr Highly visible A-frame folding safety sign to warn employees
of a hazardous spill
FEATURES & BENEFITSr Manufactured from 4mm fluted polypropylener Lightweight and waterproofr Foldable for easy storage when not requiredr Double sidedr Dimensions 300 x 600mm
Code Description
SPILL KILL SELF STANDING FOLDING SIGN
FL-123-030 Caution Hazardous Spill
Code Ref Description
SPILL KILL SIGNS
FL-123-024 H Emergency Chemical Spill Kit RP
FL-123-025 H Emergency Chemical Spill Kit SAV
FL-123-026 I Spill Kit Located At RP
FL-123-027 I Spill Kit Located At SAV
FL-123-012 J In The Event Of An Emergency Spill RP
FL-123-004 J In The Event Of An Emergency Spill SAV
FL-123-028 K Spill Kit Station RP
FL-123-029 K Spill Kit Station SAV
FL-123-021 L Drain Isolation Kit RP
FL-123-020 L Drain Isolation Kit SAV
FL-123-002 Handling Chemicals Safely 400 x 600mm Vinyl Poster
APPLICATIONr Informative signs to help protect the health and safety of
employees and workplace visitors
FEATURES & BENEFITSr Draw attention to health and safety hazardsr Indicate where emergency equipment is locatedr Provide general information and directionsr Ensures best practise is standard within an organisation
A-Frame Safety Sign
All signs are available in a choice of:
RIGID PLASTIC (RP)r Manufactured from glossy, lightweight rigid PVC plastic for
high impact strengthr Suitable for internal and external use
SELF ADHESIVE VINYL (SAV)r Manufactured in high gloss, flexible PVC with self adhesive
backingr Suitable for internal use only
BEING READY
NEW
Spill Kit AccessoriesMADE INTHE UK
74
APPLICATIONr Suitable for disposing of soiled waste components after a spill
FEATURES & BENEFITSr Manufactured from heavy duty PVCr Marked CAUTION HANDLE WITH CAREr Supplied with cable ties to safely secure after user Dimensions W x L 600 x 1200mm
Code Description Quantity Per Pack
SPILL KILL HAZARDOUS WASTE BAGS
FL-121-002 Yellow Disposal Bag And Ties 10
FL-121-008 Yellow Disposal Bag And Ties 100
Yellow Disposal Bags
APPLICATIONr Suitable for disposing of general waste
FEATURES & BENEFITSr Manufactured from PVCr Supplied with cable ties to safely secure after use
Code Description Quantity Per Pack
SPILL KILL GENERAL WASTE BAGS
FL-121-003 Medium Duty 760 x 1415mm 100
FL-121-004 Heavy Duty 635 x 1244mm 50
Black Disposal Bags
APPLICATIONr Suitable for cordoning off areas that have had a
hazardous spill occurrence
FEATURES & BENEFITSr Manufactured
from non-adhesive medium duty PVC
r Black and yellow chevron design
r Dimensions 75mm wide x 50m long
Barrier Tape
Code Description
SPILL KILL HAZARD WARNING TAPE
FL-121-005 Black/Yellow Barrier Tape
APPLICATIONr Designed for the safe collection of oil and chemical based
residues without the danger of ignition
FEATURES & BENEFITSr Two-part construction allows it to be easily stowed inside
a wheeled binr Non-sparking materialr Lightweight construction, will not rust or corroder Safe solution to cleaning up hazardous spills
Polypropylene Safety Shovel
Code Description
SPILL KILL SAFETY SHOVEL
FL-121-007 Safety Shovel
BEING READY
APPLICATIONr Designed for securing spill kit lids
FEATURES & BENEFITSr Supplied in a highly visible blue colourr Dimensions 25m long x 25mm wider Leaves a visual indication to alert spill kit
users to evidence of tampering
Code Description
SPILL KILL TAMPER PROOF TAPE
FL-121-001 Tamper Proof Tape
Spill Kit Tamper Proof Tape
Spill Kit AccessoriesMADE INTHE UK
75
APPLICATIONr Designed to indicate that a wheeled bin spill kit has had its contents
inspected and ensures that the spill kit contents remain dry at all times
FEATURES & BENEFITSr Manufactured from heavy duty hard wearing
weatherproof vinylr Any product removed should be documented on
the audit form and replaced r Provides additional weatherproof protection for
spill kits that are stored outside
Code Description
SPILL KILL AUDIT COVERS
FL-17-001 Cover for 80 Litre
FL-17-002 Cover for 120 Litre
FL-17-003 Cover for 240 Litre
FL-17-004 Cover for 360 Litre
Spill Kit Audit Covers
APPLICATIONr Suitable for minimal risk applications
FEATURES & BENEFITSr Nitrile powder free, non steriler Puncture resistantr Excellent resistance to oil, grease and a
wide range of toxic chemicals and solventsr Manufactured in accordance with EN374
Nitrile GlovesCode Description Quantity
Per Pack
SPILL KILL DISPOSABLE NITRILE GLOVES
FL-67-001 Nitrile Gloves Small 1000
FL-67-002 Nitrile Gloves Small 100
FL-67-003 Nitrile Gloves Medium 1000
FL-67-004 Nitrile Gloves Medium 100
FL-67-005 Nitrile Gloves Large 1000
FL-67-006 Nitrile Gloves Large 100
FL-67-007 Nitrile Gloves Extra Large 1000
FL-67-008 Nitrile Gloves Extra Large 100
Code Description Quantity Per Pack
SPILL KILL HEAVY DUTY NITRILE GLOVES
FL-67-009 Heavy Duty Medium 12
FL-67-010 Heavy Duty Large 12
FL-67-011 Heavy Duty Extra Large 12
SPILL KILL DISPOSABLE GLOVES
SPILL KILL HEAVY DUTY GLOVES
BEING READY
APPLICATIONr Chemical handling heavy duty applications
FEATURES & BENEFITSr Fingers, thumbs and palms are textured
for increased gripr Flocklined interior provides increased comfort
and absorbs perspiration r Conform to European PPE Directive 89/686/
EEC and are tested to European Standards EN 420, EN 388, EN374 and EN 1149
Drum Repair
76
APPLICATIONr Provides a temporary seal in damaged/leaking drums
FEATURES & BENEFITSr Applied directly over the leak to form an immediate sealr Oil and petrol resistantr Can be applied to dirty, greasy or rusty surfaces without any
preparationr Manufactured from a non-toxic materialr 5 year shelf life providing it remains
unopened and is stored out of direct sunlight
Plug N Dyke Putty
Code Description
SPILL KILL PLUG N DYKE PUTTY
FL-42-501 Plug N Dyke Putty 0.5kg
FL-42-502 Plug N Dyke Putty 1.0kg
APPLICATIONr Epoxy putty that provides a permanent repair to most
plastic surfaces
FEATURES & BENEFITSr Extremely easy to use r Two part component, hand mixable 20 to 25 minutes
work life r Fast setting, functional cure in 2 to 3 hoursr Resistant to hydrocarbons, alcohols, ketones and
dilute acidsr Suitable for internal and external user 2 year shelf life providing it remains unopened
Plastic Epoxy Repair Sticks
Code Description
PLASTIC EPOXY REPAIR STICK
FL-42-503 Plastic Repair Stick 75mm
FL-42-504 Plastic Repair Stick 175mm
MADE INTHE UK
BEING READY
NEW
Pipe RepairMADE INTHE UK
77
APPLICATIONr Suitable for emergency repairs to gas, oil, water, waste
pipes and chemical lines
FEATURES & BENEFITSr Quick and easy to user Good temperature, pressure and chemical resistancer Sets in under 10 minutes and is fluid compatibler No mixing or measuring, simply soak in water for
10 secondsr Food safe when cured
Quick Wrap Bandage
Code Description DimensionsW x L
QUICK WRAP BANDAGE
FL-42-505 Pipes Up To 45mm External Dia 50mm x 1.5m
FL-42-506 Pipes Up To 75mm External Dia 50mm x 3.6m
FL-42-507 Pipes Up To 75mm External Dia 75mm x 3.6m
FL-42-508 Pipes Up To 100mm External Dia 100mm x 3.6m
APPLICATIONr Emergency leak stopper designed for all pipe work systems
FEATURES & BENEFITSr Simply wraps over the leak and locks with hook and loop
systemr Seals leaks under pressure without having to shut
down the systemr Manufactured from EPDM rubber r Chemical resistantr Temperature range 40 to 120 deg Cr No tools required, can be reused time and time again
Strap It Leak Stopper
Code Description Pressure Tested Bar
STRAP IT LEAK STOPPER
FL-42-509 Pipes 15 - 25mm NB 10.26
FL-42-510 Pipes 25 - 80mm NB 6
FL-42-511 Pipes 50 - 80mm NB 3.9
FL-42-512 Pipes 100mm NB 3.5
NEW
Maintenance Wipes
78
MADE INTHE UK
APPLICATIONr Where a high quality contaminant free surface is required
FEATURES & BENEFITSr Manufactured from non-
woven viscose polyester material
r Extremely low residuer Minimal VOCr Non flammabler Supplied in re-sealable
plastic pouches r Pack contains 25 x individual wipes
Code Description
DG WIPES
FL-67-022 Degreasing Wipes Pack of 25
Degreasing Wipes
APPLICATIONr General purpose TAKrag suitable for the removal of dust
contamination
FEATURES & BENEFITSr Removes all particles of dust and
leaves a clean surfacer Specifically formulated to be
compatible with all paint systemsr An ideal tool in the fight against
contaminationr Pack contains 50 x individual
wrapped wipes
Code Description
TAKRAG
FL-67-020 TAKrag Pack of 50
TAKrag
APPLICATIONr Suitable for use in most industrial applications
FEATURES & BENEFITSr Excellent penetration and cleaning of difficult to remove
contaminants, mineral oils, greases, tar/bitumen, semi-cured adhesives and sealants, uncured paints/varnishes and oil based printing inks
r Fully biodegradable and can be washed off with water therefore making it ideal for use where oil/water separation equipment is employed to minimise waste disposal.
r Pack contains 25 x individual wipes
Code Description
SOLVENT WIPES
FL-67-021 Solvent Wipes Pack of 25
Orange Solvent Wipes
APPLICATIONr Ideal for small spills of
oil and water based liquids
FEATURES & BENEFITSr Individual sheets measure
400 x 380mm r Absorbs 0.1 litres of liquid
per sheetr Efficient and economical
Code Description Dimensions W x L
SPILKLEEN INDUSTRIAL WIPE
SK-08-107 Fossetex Wipe 40cm x 380m
Industrial Wipes
NEW
Witches Hat Drain Guards MADE IN
THE USAMADE INTHE USA
79
APPLICATIONr Prevents sediment and other pollutants from entering
the drain system
FEATURES & BENEFITSr Quick and easy installation, simply lift the grate, lower the
witches hat into position and replace the grate pinching the fabric in place to keep the unit secure
r Excess fabric can be trimmed to suit the drain sizer Easily emptied and reusedr Reduces the amount of sediment, debris, cigarette butts,
litter, grasses and leaves from entering the drain systemr Exceeds 80% sediment removal efficiencyr Suitable for use on construction sites, industrial carparks,
hospitals, and retail facilitiesr Avoids the cost of pumping out the drain systems to clear
blockagesr Custom sizes available
Oil & Sediment Model Removes hydrocarbons, dirt, sand and other contaminants.Oil & Sediment Plus Model The addition of Ultra-X Tex filter strips increases oil and grease absorption.Debris Model Designed specifically to catch larger items and floatables such as leaves, cigarette butts and paper goods.
Code Description DimensionsL x W x H mm
PackQuantity
Weightkgs
ULTRATECH WITCHES HAT DRAIN GUARDS
UL-42-421 Oil & Sediment 550 x 400 x 458 1 0.4
UL-42-422 Oil & Sediment 1220 x 915 x 458 1 0.5
UL-42-411 Oil & Sediment 1220 x 915 x 458 10 0.5
UL-42-423 Oil & Sediment 1524 x 1524 x 458 1 1
UL-42-424 Oil & Sediment Plus 1220 x 915 x 458 1 1
UL-42-425 Oil & Sediment Plus 1220 x 915 x 458 10 1
UL-42-426 Oil & Sediment Plus 1524 x 1524 x 458 1 1.5
UL-42-427 Debris 1220 x 915 x 458 1 0.5
UL-42-428 Debris 1220 x 915 x 458 10 0.5
NEW
Draintector
80
Low Risk Site Medium Risk Site High Risk Site Compliance Site
ACTIVATION MANUAL REMOTE GSM AUTOMATED
High Risk Fire * *Spill unlikely to be detected by employee *Large distance between employee and activation point * * *Unmanned site *Large sites unsighted *Large movements of liquids on site * * *Numerous final outflows * * *
APPLICATIONr Comprises a control panel located
above ground that operates a bladder closure system installed within the drain system. When activated, the closure system seals the drain stopping pollution of the watercourse.
FEATURES & BENEFITSr Can be used as a preventative
measure to seal drains at time of high risk including deliveries and during site maintenance or in the event of fire to rapidly block the drain preventing hazardous/contaminated firewater runoff
r Manual push button, GSM remote or fully automated 24/7 activation
r Automated test procedurer Mains power with battery backupr IP45 rated GRP lockable cabinetr Simple operation with rapid activationr No effect on the existing drain system
flow under normal conditionsr Isolate part or all of the siter Self diagnostic check and reporting of
activationsr Single day installation with minimal
disruption to site activityr Retro fit to existing drainage systemsr Meets with EA guidlines
ACTIVATION METHODS
MADE INTHE UK
Tuffplug Drain Sealing Plugr Manufactured from heavy gauge chemical and hydrocarbon
resistant PU rubberr Installed discreetly within the drain without
affecting the flow in normal conditionsr Expands to block a length of drain ensuring
water tightness
NEW
MADE INTHE UK
81
Hard Wired Automated Control Panelr The inbuilt volt-free receiver enables 24/7
monitoring and connection to and by a fire alarm, business management system or other pollution monitoring systems.
Please contact your local distributor to arrange a site visit and survey
Manual Push Button Control Unitr Enables activation locally at the control panel
via push button. Suitable for preventive measures preventing pollution. Kit includes IP54 rated GRP cabinet, mains powered with 12V battery back-up, compressor, pneumatics system and push button activation.
Remote/GSM Control Unitr Enables activation remotely via text message.
Ideal where access to control panel is not possible due to a fire or hazardous spill.
BEING READY
Interceptor Alarms
82
APPLICATIONr Oil separators (interceptors) are fitted in drainage systems
below ground. They are designed to trap oil and other hydrocarbons that have entered drains, preventing pollution incidents. If oil, silt or liquid reaches excessive levels, oil can pass through the separator and pollute watercourses which may result in expensive fines and clean up costs.
r European Standard EN858-1-2 recommends separators are fitted with an alarm that warns of excessive liquid levels.
FEATURES & BENEFITSr Ensures safe and economic operation of interceptorsr Automated and remote monitoringr Can be retro fitted to all manufacturers interceptorsr If excessive levels of oil, liquid and silt are reached the
alarm activatesr Mains or solar powered systems availabler Informs you when your separator requires emptyingr Reduces interceptor servicing costsr Complies with EN858-1&2 and PPG3
Please contact your local distributor to arrange a site visit and survey
MADE INTHE UK
NEW
MADE INTHE UK
83
High Oil Levelr When excessive levels are
reached the alarm activates a claxon or beacon to provide an audible or visual notification of excessive oil levels
r Allows time to take action preventing oil passing through the separator and polluting watercourses which may result in expensive fines and clean up costs
High Silt Levelr When excessive levels are
reached the alarm activates a claxon or beacon to provide an audible or visual notification that the separator needs emptying
High Water Levelr Probe is suspended in the
interceptor and when excessive water levels are reached the alarm activates a claxon or beacon to provide an audible or visual notification that the separator requires emptying
BEING READY
Drain Covers
84
APPLICATIONr Ideal for placing on steel drum storage units near to drain
systems where hazardous liquids are stored and in exposed areas
FEATURES & BENEFITSr Manufactured from flexible polyurethane that provides tight
adherence to metal drainsr Will attach to metal drain surfaces that are free of dirt and
debris r Re-usable, compact and lightweight r Resistant to weather and temperature -20°C to +80°Cr Resists acids and alkalis
Magnetic Drain Cover
Code Dimensions L x W x H mm Weight kgs
MAGNETIC DRAIN COVERS
FL-42-204 600 x 600 x 9 2.5
APPLICATIONr Prevents any liquid spills flowing into drains and
contaminating controlled waters
FEATURES & BENEFITSr Can be moulded for use on all types of drainsr 100% seal even on rough groundr Remains flexible down to -20°Cr Resistant to oil, water and most chemicalsr Single use onlyr Wall mounted storage bag available as an optional accessoryr 5 year shelf life providing it remains unopened
Plug Rug Drain Cover
Code Dimensions L x W x H mm Pack Quantity Weight kgs
SPILL KILL PLUG RUGS
FL-42-301 650 x 450 x 20 4 28
FL-42-303 405 x 405 x 20 4 16
FL-42-304 200 x 200 x 20 12 12
SPILL KILL PLUG RUG BAG
FL-42-102 650 x 460 1 0.5
APPLICATIONr Prevents any liquid spills flowing into drains and
contaminating controlled waters
FEATURES & BENEFITSr Manufactured from neoprener Can be used on any surfacer Resistant to oil, water and most chemicalsr Reusable after washing for future use r Storage bag available as an optional accessory
Neorug Drain Cover
MADE INTHE UK
Code Dimensions L x W mm Weight kgs
SPILL KILL NEORUG DRAIN COVER
FL-42-101 1000 x 1000 3
SPILL KILL NEORUG STORAGE BAG
FL-42-206 1100 x 170 0.5
BEING READY
Drain Covers
85
APPLICATIONr Prevents any liquid spills flowing into drains and
contaminating controlled waters
FEATURES & BENEFITSr Manufactured from 100% polyurethaner Resistant to oil, water and most chemicalsr The contact side of the drain cover is sticky creating an
effective seal r Carry handles assist handling and deploymentr Reusable after washing with soapy water for future user Extremely supple and adherentr Silicone tissue on one side for easier user Storage bag available as an optional accessory
Polyurethane Drain Cover
Code Dimensions L x W x H mm Weight kgs
SPILL KILL POLYURETHANE DRAIN COVER
FL-42-201 910 x 910 x 11 15
FL-42-202 610 x 610 x 11 7
SPILL KILL STORAGE BAG
FL-42-203 1100 x 170
APPLICATIONr Forms a seal to prevents any liquid spills flowing into drains
FEATURES & BENEFITSr Clear material provides unobstructed view of covered drains
and enables responders to ensure a complete seal r Manufactured from 100% polyurethaner Reinforcing mesh is sandwiched between layers of
polyurethane for additional strengthr Resistant to oil, water and most chemicalsr Reusable after washing with soapy water for future use
Transparent Drain Cover
Code Dimensions L x W x H mm Weight kgs
ULTRATECH TRANSPARENT DRAIN COVER
UL-42-429 458 x 458 x 10 2.5
UL-42-430 610 x 610 x 10 3.5
UL-42-431 915 x 915 x 10 9.0
MADE INTHE USAMADE IN
THE USA
BEING READY
NEW
Drain Protection
86
APPLICATIONr Prevents liquid spills from entering circular drains
FEATURES & BENEFITSr Easy to install and remover Flexible, chemical-resistant polyurethane plug forms
a tight seal in conical drainsr Cleans easily with soap and water for reuser Non-permanent alternative to sealing drains with cement
Conical Plugs
Code Dimensions Plug Dia x H mm
SPILL KILL CONICAL DRAIN PLUGS
FL-42-405 35 to 70 x 120
FL-42-406 70 to 95 x 120
FL-42-407 85 to 120 x 120
FL-42-408 120 to 180 x 200
FL-42-409 170 to 230 x 200
APPLICATIONr Suitable for containing
spills and preventing liquids from entering a drain
FEATURES & BENEFITSr Resistant to oils and
most chemicalsr Manufactured from non-
absorbent polyurethane r Quick to deploy and
provides essential protection for drains
r Suitable for use on slopes and uneven surfaces
r Washable with detergent and water for reuse
r Yellow colour for good visibilty
Spill Barrier
Code Dimensions L x W x H mm
SPILL KILL DRAIN BARRIER
FL-42-401 3000 x 70 x 100
APPLICATIONr Specifically designed
for the absorption of oils and hydrocarbons from drain gullies
FEATURES & BENEFITSr Easy to deploy and collectr Lightweight, clean and
efficientr Highly absorbent, can
absorb up to 20 times its own weight in oils
r Will float on the surface even when fully saturated
r The bioactive gully sock reduces separator cleaning by digesting up to 2kg of oil every week for up to 6 months
Drain Gully Socks
Code Description Dimensions D x L mm Pack Quantity
SPILL KILL DRAIN GULLY SOCKS
FL-01-201 Standard Sock 200 x 500 2
FL-01-202 Bio-Active Sock 200 x 500 1
BEING READY
NEW
APPLICATIONr Ideal for installing alongside production machines,
walkways, workbenches and counter tops
FEATURES & BENEFITSr Traps oils, greases and water based liquidsr Heavy weight polyester/polypropylene needle
punch fabric r Adhesive backing prevents movement and ensures
a tight grip to most surfacesr Quickly and easily peeled up when replacement is requiredr Easily cut to size r Suitable for both foot and forklift truck traffic
87
APPLICATIONr Provide a quick and effective way
to disinfect footwear and avoid the spread of contamination
FEATURES & BENEFITSr Extremely hardwearing and can be
positioned on any flat surface
r Absorbent matting contained within a PVC coated polyester envelope
r Disinfectant is transferred evenly without splashing which reduces wastage
r Replenish disinfectant when required
(see page 88)
Code Dimensions L x W m
Containment Capacity Litres
Weightkgs
SPILL KILL PEDESTRIAN DISINFECTANT MATS
FL-04-201 1.5 x 1 20 4.6
FL-04-202 2 x 1 30 6.0
FL-04-203 2.5 x 1 50 7.2
APPLICATIONr Control foot-borne contamination from entering
or leaving work areas in electronics industry, food and drink, laboratories, construction and paint spray booths
FEATURES & BENEFITSr Super dust absorbentr 36 impregnated cotton covers enclosed in a
heavy plastic frame with a super dust absorbent cushion foam interior
r Top layer can be removed when soiled to reveal a clean layer
r Quick to install
Code Dimensions L x W mm Pack Quantity
TAKMATS
FL-04-301 610 x 910 2
FL-04-303 1040 x 910 2
FL-04-305 1520 x 910 1
TAKmats
Protective MatsMADE INTHE UK
Disinfectant Pedestrian Mats
Standfast Sticky Backed Rolls
Code Colour
Dimensions L x W
Containment Capacity Oil/Water Litres
MAINTENANCE STICKY BACKED FLOOR ROLLS
SC-08-115 Grey 15m x 86cm 40/28
SC-08-114 Grey 30m x 86cm 80/57
SC-08-117 Blue 15m x 86cm 40/28
SC-08-116 Blue 30m x 86cm 80/57
BEING READY
NEW
Disinfectant Vehicle MatsDisinfectants
88
MADE INTHE UK
APPLICATIONr Dispenses disinfectant onto the tyres of vehicles to aid
biosecurity in dairies, farms, poultry sheds, food factories, horticulture units, zoos, stables and agricultural shows.
FEATURES & BENEFITSr Extremely hardwearingr Absorbent matting contained within a PVC coated
polyester enveloper The disinfectant is transferred evenly onto the tyres without
splashing which reduces wastage r Disinfectant does not contaminate the surrounding arear Easy to transport and can be used on any flat surface r Easy fix bolts providedr Replenish disinfectant when requiredr Two mats per pack
Code Application Dimensions L x W m
Containment Capacity Litres
Weightkgs
SPILL KILL VEHICLE DISINFECTANT MATS
FL-04-401 Heavy Goods Vehicles 3.5 x 1 50 32
FL-04-402 Farm/Agricultural Vehicles 6 x 1 85 50
By law you must use a Department for Environment Food & Rural Affairs (Defra) approved disinfectant when there is an outbreak of a notifiable disease. Notifiable diseases can be:Endemic already present in the UK, such as bovine TBExotic not normally present in the UK, such as Foot & Mouth, Swine Vesicular Disease and Avian Influenza
APPLICATIONr Developed for use with Spill Kill
biosecurity vehicle and pedestrian disinfectant mats
Code Name Application Size
DEFRA APPROVED DISINFECTANTFL-04-502 BioShield P Routine disinfection 4 x 5lts
Liquid Vehicle mats Disinfectant Foot and mouth disease Swine vesicular disease
Avian influenza & Newcastle disease
FL-04-501 BioVX Routine disinfection 10kgsDisinfectant Vehicle mats Powder Foot and mouth disease Swine vesicular disease
Avian influenza & Newcastle disease
BEING READY
NEW
89
MADE INTHE UK
APPLICATIONr Keeps sleepers and ballast free from oils, lubricants and
effluent
FEATURES & BENEFITSr High tensile strength melt blown polypropylene absorbentr Laminated with a permeable reinforcing layer both sides
to prevent splitting on sharp ballast and damage from foot traffic
r Fitted with eyelets for fast and easy fixing to rail holding clips on all types of sleepers
r Wide enough to completely cover the web to web ensuring total coverage
r Enables track maintenance to be carried out in a clean environment
r Prevents injury to personnel due to slipping on oily ballast or sleepers, improves safety and cleanliness
Code Application Dimensions L x W cm
Pack Quantity
SPILL KILL RAIL TRACKMATS
FL-04-101 Trackmat Long 1600 x 145 1
FL-04-102 Trackmat Short 400 x 145 2
Trackmats
APPLICATIONr Used alongside trackmats for the ultimate in environmental
protection and track safety and for railway maintenance areas especially pits below carriages
FEATURES & BENEFITSr Slip resistantr Chemical, oil and grease resistantr Flame retardantr Electrical/sound insulatingr Quick to installr Easy to clean with a high pressure hose
Code Application Dimensions L x W cm
SPILL KILL RAIL TRACKGRIP
FL-04-103 Trackgrip 1000 x 91
FL-04-104 Trackgrip 1000 x 122
Trackgrip
Railway Track MatsBEING READY
Grit Bin / Pallet Boxes
90
Code Description Dimensions L x W x H mm
Weight kgs
SPILL KILL GRIT BIN
FL-69-003-Y Grit/salt Bin 220 Litre 1005 x 590 x 885 17
APPLICATIONr Suitable for the storage of absorbent granules, sand
and winter salt
FEATURES & BENEFITSr Manufactured from heavy duty UV stabilised PEr Angled design allows water to run offr Large opening for easy accessr Forklift and pallet truck accessr Chemical and temperature resistant +50 to -35deg Cr Internal and external use
Code Description External Dimensions L x W x H mm
Internal Dimensions L x W x H mm
Weight kgs
SPILL KILL FOLDING PALLET BOX
FL-144-006 Pallet Box Vented Sides 1200 x 1000 x 810 1120 x 920 x 625 45
FL-144-004 Pallet Box Solid Sides 1200 x 1000 x 810 1120 x 920 x 625 45
FL-144-005 Universal Lid 1200 x 1000 x 40
APPLICATIONr Suitable for use in factories, warehouses
and recycling plants for the storage and transportation of goods
FEATURES & BENEFITSr Manufactured from high-density
polyethylener Easy to fold and erectr Four way entry for fork and pallet trucksr Temperature range -20°C to +40°Cr Capacity 640 litresr Folds flat when not in use to save
space and transport costs on any return transport
r Lid available as an accessory
Grit Bin
Collapsible Folding Pallet Boxes
BEING READY
NEW
Wheelie Bins
91
Code Description Dimensions L x W x H cm
Weight kgs
SPILL KILL 2-WHEELED BINS
FL-143-75 Wheelie Bin 75 Litre 46 x 53 x 66 6
FL-143-120 Wheelie Bin 120 Litre 48 x 56 x 94 10
FL-143-140 Wheelie Bin 140 Litre 48 x 56 x 100 13
FL-143-240 Wheelie Bin 240 Litre 58 x 74 x 108 14.2
FL-143-360 Wheelie Bin 360 Litre 58 x 88 x 112 16
Please specify colour when ordering
APPLICATIONr Suitable for use in all industrial and domestic environments
FEATURES & BENEFITSr Manufactured from high density polyethylener Resistant to weather conditions and UV raysr Fitted with sturdy rubber wheelsr Available in blue, brown, grey, green, red and yellow
360L
240L
140L
120L
75L
BEING READY
Wheeled BinsDrop Front Wheeled Bins
92
Code Description Dimensions L x W x H cm
Weight kgs
SPILL KILL DROP FRONT WHEELED BINS
FL-143-660-DFY Wheeled Bin 660 Litre 136 x 77 x 120 44
FL-143-770-DFY Wheeled Bin 770 Litre 77 x 126 x 131 59
FL-143-1100-DFY Wheeled Bin 1100 Litre 137 x 107 x 135 88
Please specify colour when ordering
APPLICATIONr Suitable for use in all warehouses, factories and
construction sites
FEATURES & BENEFITSr Allows for easy access and avoids unnecessary lifting by
allowing waste to be disposed and removed using the drop front feature
r Manufactured from high density polyethylener Resistant to extreme temperatures and weather conditionsr Reinforced hinges and ergonomic side handlesr Compatible with standard lifting mechanismsr 200mm rubber tyres on swivel castors for full mobilityr Two central wheel locksr Available in blue, grey, green, red and yellow
APPLICATIONr Suitable for use in all warehouses, factories
and construction sites
FEATURES & BENEFITSr Manufactured from high density
polyethylener Resistant to extreme temperatures and
weather conditionsr Reinforced hinges and ergonomic
side handlesr Compatible with standard lifting mechanismsr 200mm rubber tyres on swivel castors
for full mobilityr Two central wheel locksr Optional accessories include fitted locks,
paper slots and bottle bank lidsr Available in blue, grey, green, red and yellow
660L Wheeled Bin
1100L Wheeled Bin
Code Description Dimensions L x W x H cm
Weight kgs
SPILL KILL WHEELED BINS
FL-143-660 Wheeled Bin 660 Litre 136 x 77 x 120 38
FL-143-770 Wheeled Bin 770 Litre 77 x 126 x 131 54
FL-143-1100 Wheeled Bin 1100 Litre 137 x 107 x 135 83
Please specify colour when ordering
Drop Front Wheeled Bins
BEING READY
Bin Accessories
93
Bottle Bank Lid with Rubber Baffle
Tow Bar Paper Slot
Code Description
SPILL KILL BIN ACCESSORIES
FL-143-101 Drop Front Kit
FL-143-102 Tow Bar
FL-143-103 Paper Slot Lid
FL-143-104 Bottle Bank Lid
FL-143-105 Bottle Bank Lid With Rubber Baffle
FL-143-106A Lid Lock
APPLICATIONr Suitable for use with all Spill Kill bins
Code Description Dimensions H x L x D mm
SPILL KILL WHEELIE BIN STORES
WB-145-001 Single Bin Store 1300 x 800 x 820
WB-145-002 Double Bin Store 1300 x 1560 x 820
WB-145-003 Triple Bin Store 1300 x 2350 x 820
WB-145-004 Apex Double Bin Store 1300 x 1530 x 810
APPLICATIONr Provides elegant and
secure storage for two wheeled bins
FEATURES & BENEFITSr Suitable for housing
240 litre wheelie bins (max dims of bin H x W x D 1080 x 740 x 740mm)
r Manufactured from pressure treated timber that has been declared to be sustainable by the Forest Stewardship Council (FSC)
r Supplied without a floor pan as designed to sit directly onto the concrete or paving
r Lifting lid chains to bin lid for easy access
r Tower bolt to secure each door closed
r 10 year guarantee against rot
r Supplied flat packed with full assembly instructions
Code Description
SPILL KILL WHEELIE BIN ART
WB-145-110 Wheelie Bin Art Sunflower
WB-145-112 Wheelie Bin Art Lavender
WB-145-113 Wheelie Bin Art Lupins
WB-145-114 Wheelie Bin Art Poppy
FEATURES & BENEFITSr Self adhesive
stickers are the perfect solution to disguising your wheelie bin
r Designed to fit both 140 and 240 Litre wheelie bins
r Easy to fitr High quality,
self adhesive, outdoor vinyl
r Digitally printed and laminated
r Sticker dimensions 365 x 815mm
r Vinyl stickers are available in letters and numbers
r Customer bespoke stickers available
Bottle Bank Lid
Bin Stores Bin Art
MADE INTHE UK
NEW
ControllingA Spill
r Granules
r Absorbents
r Pads
r Rolls
r Cushions
r Socks
r Dispensing Stations
r Chemical Neutralisation
r Water Management
r Marine & Inland Water Oil Spills
r Flood Protection
95
Absorbents
Maintenance - Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
Oil & Fuel - White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
Chemical - Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
HSE recommendation on chemical spills - Liquid spills involving hazardous materials should first be contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be neutralised with appropriate neutralising agents.
Pads - manufactured from polypropylene fibre in two brands, Spilkleen and Spilchoice, available in maintenance, oil and fuel and chemical and in light, medium and heavy weight options with varying levels of absorption to suit customers requirements.
Spilkleen - simple and effectiveManufactured from a single layer meltblown which provides fast absorption but limited durability.
Spilchoice - performance and endurance
Single lamination where a thin layer of ‘no lint’ spun-bond material is sonically attached onto the top surface of the pad, this greatly reduces the linting, (fibres coming off easily) and improves the strength considerably.
Double lamination construction where the pad has both surfaces covered with a non-linting strong spunbond cover. This configuration is the best for durability and results in the pad having virtually no linting at all and can resist rips and abrasions even when wet.
Controlling A Spill
96
Rolls - manufactured from polypropylene fibre absorbents. Designed to cover large areas and walk-ways. Perforated rolls can be an effective way of dispensing by tearing off the pad at each perforation. The poly-backed version is ideal for MRO applications as the PVC lamination prevents the spill from contaminating the surface beneath. Available in maintenance, oil and fuel and chemical variants to suit individual requirements.
Cushions - absorb leaks that are too large for pads and where access is restricted. Manufactured from stitched spun bond or knitted outer fabric and fill. Available in maintenance, oil and fuel and chemical variants.
Socks - contain spills around equipment and prevents a spill from spreading. Suitable for both internal and external applications. Manufactured from stitched spun bond or knitted outer fabric and fill. Available in maintenance, oil and fuel and chemical variants.
Granules - provide an effective solution for absorbing chemical, oil, and water spills both internal and external.
Dispensing stations - provide efficient and rapid response to spills, available in mobile floor and wall mounted options.
Chemical neutralisation - integrating chemical neutralising products into a spill response plan will reduce disposal costs by converting hazardous waste to general waste. Neutralisation is recognised as an important element for spill response safety.
Water management - provides an effective solution by pumping water into a bag where contaminants are trapped and filtered so only water escapes into the ground or drain.
Marine & inland water oil spills - specific products that provide an effective solution for dealing with an oil spill in open and enclosed waters.
Flood protection - innovative products designed to create a highly effective barrier to the threat of floodwater including leaks and spills in the domestic and commercial market.
97
Granules
98
CLAY GRANULESr Provide efficient clean-up of oil, fuel and water based liquidsr Remains granular even when saturatedr Non-flammable
PLUSr Suitable for internal use on oil, fuel and water based spillsr Manufactured from 100% recycled materials
SAFE-SOAKr Manufactured from 100% recycled materialsr Environmentally acceptable by-product which fulfils
government guidelines on recyclingr Non-flammable
SPILL-AIDr Suitable for absorbing liquid or semi-liquid spills of animal,
mineral, chemical or vegetable based substances except hydrofluoric acid
r Lightweight, non-toxic, non-flammable and enviromentally safer Reduces the cost of clean up, labour and materials
BATTEREEZY r Specifically for the neutralisation of sulphuric acidr Once the reaction has completed the granules will adopt a
darker colourr Can be disposed of as general waste once the reaction has
finished
Code Description Absorbency litres per bag
Volume Litres
Weight kgs
Pallet quantity
GRANULES
SK-03-001 Clay Granules 34 30 18 50
SK-03-004 Clay Granules 20 20 14 70
SK-03-002 Plus 24 30 12 72
SK-03-003 Safe-Soak 27 30 12 70
SK-03-006 Spill-Aid 30 30 4 70
FL-12-101 Battereezy 16 16 6 60
CLAY GRANULES
PLUS
SAFE-SOAK
BATTEREEZY
SPILL-AID
MADE INTHE UK
CONTROLLING A SPILL
Granules
99
MADE INTHE UK
Absorbent Icon Guide
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
MELTBLOWNPERFORATED SPUNBOND
PADS DIMPLED PERFORATED BOX BAG
SINGLE SIDED COVERSTOCK
NON LINTING CUSHION SOCKS ROLLS
Spunbond single lamination where a thin layer of ‘no lint’ spun-bond material is sonically attached onto the top surface of the pad, this greatly reduces the linting, (fibres coming off easily) and improves the strength considerably.
Spunbond double lamination where the pad has both surfaces covered with a non-linting strong spunbond cover. This configuration is the best for durability and results in the pad having virtually no linting at all and can resist rips and abrasions even when wet.
CONTROLLING A SPILL
Pads
100
APPLICATIONr Suitable for everyday maintenance, repair and general clean
up operations
FEATURES & BENEFITSr Highly absorbent meltblown absorbent padsr Bonded and dimpled for additional strength even when
contaminated where indicatedr Perforated sheets minimise waste where indicatedr Absorbency rates to suit customers requirementsr Reliable performancer Dispensing systems available
HSE RECOMMENDATION ON CHEMICAL SPILLS r Liquid spills involving hazardous materials should first be
contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be neutralised with appropriate neutralising agents. Please see pages 112 - 113.
Code Description Icon ref Dimensionscm
Absorbency per pad litres
Quantity per pack
SPILKLEEN MAINTENANCE PADS
SK-05-110 Heavy Weight A,D,E 38 x 50 1.2 100
SK-05-101 Medium Weight A,B,C,D,E 38 x 50 1 100
SK-05-102 Medium Weight 25 A,B,C,D,E 38 x 50 1 25
SK-05-107-B Medium Weight A,B,C,D,E 35 x 40 0.4 100
SK-05-103 Lightweight A,B,C,D,E 38 x 50 0.5 200
SK-05-104 Lightweight 100 A,B,C,D,E 38 x 50 0.5 100
SPILKLEEN OIL & FUEL PADS
SK-05-214 Heavy Weight A,D,E 38 x 50 1.2 100
SK-05-201 Medium Weight A,D,E 38 x 50 1 100
SK-05-202 Medium Weight 25 A,D,E 38 x 50 1 25
SK-05-206-B Medium Weight A,B,C,D,E 35 x 40 0.4 100
SK-05-203 Lightweight A,D,E 38 x 50 0.5 200
SK-05-204 Lightweight 100 A,D,E 38 x 50 0.5 100
SPILKLEEN CHEMICAL PADS
SK-05-306 Heavy Weight A,D,E 38 x 50 1.2 100
SK-05-301 Medium Weight A,B,C,D,E 38 x 50 1 100
SK-05-303-B Medium Weight A,B,C,D,E 35 x 40 0.4 100
SK-05-302 Lightweight A,B,C,D,E 38 x 50 0.5 200
MELTBLOWN
*
* BEST SELLERAPADS
BDIMPLED
CPERFORATED
DBOX
EBAG
MADE INTHE UK
r SK-05-110
r SK-05-214
r SK-05-306
PERFORATED
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
*
**
**
CONTROLLING A SPILL
Pads
101
APPLICATIONr Suitable for maintenance, repair and heavy duty clean up
operations in the industrial working environment
FEATURES & BENEFITSr Highly efficient, high performance meltblown absorbent
padsr Layer of spun-bond material sonically attached to the top
surface of the pad reduces the linting and improves the strength
r Bonded and dimpled for additional strength even when contaminated where indicated
r Perforated sheets to minimise waste where indicatedr Absorbency rates to suit customers requirementsr SC-05-206 and SC-05-304 pads have their top and
bottom surfaces covered with a strong spun-bond polypropylene coverstock which results in an absorbent ideal for use in lint free environments
r Dispensing systems available
* BEST SELLER
APADS
BDIMPLED
CPERFORATED
DBOX
EBAG
FSINGLE SIDED COVERSTOCK
GNON LINTING
Code Name Icon ref Dimensionscm
Absorbency per pad litres
Quantity per pack
SPILCHOICE MAINTENANCE PADS
SC-05-107 Heavy Weight A,B,C,D,E,F 38 x 50 1.2 100
SC-05-108-B Heavy Weight A,B,C,D,E,F 35 x 40 1 100
SC-05-101 Medium Weight A,B,C,D,E,F 38 x 50 1 100
SC-05-102 Medium Weight 25 A,B,C,D,E,F 38 x 50 1 25
SC-05-109-B Medium Weight A,B,C,D,E,F 35 x 40 0.8 100
SC-05-103 Lightweight A,B,C,D,E,F 38 x 50 0.5 200
SC-05-104 Lightweight A,B,C,D,E,F 38 x 50 0.5 100
SPILCHOICE OIL & FUEL PADS
SC-05-201 Heavy Weight A,B,C,D,E,F 38 x 50 1.2 100
SC-05-202 Medium Weight A,B,C,D,E,F 38 x 50 1 100
SC-05-203 Medium Weight 25 A,B,C,D,E,F 38 x 50 1 25
SC-05-204 Lightweight A,B,C,D,E,F 38 x 50 0.6 200
SC-05-205 Lightweight A,B,C,D,E,F 38 x 50 0.6 100
SC-05-206 Non Linting A,B,C,D,E,G 38 x 50 0.9 100
SPILCHOICE CHEMICAL PADS
SC-05-301 Heavy Weight A,B,C,D,E,F 38 x 50 1.2 100
SC-05-302 Medium Weight A,B,C,D,E,F 38 x 50 1 100
SC-05-303 Lightweight A,B,C,D,E,F 38 x 50 0.4 200
SC-05-304 Non Linting A,B,C,D,E,G 38 x 50 0.8 100
SPUNBOND
MADE INTHE UK
PERFORATED
r SC-05-107 r SC-05-201
r SC-05-301
*
*
*
r SC-05-101
CONTROLLING A SPILL
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
Rolls
102
MELTBLOWN
MADE INTHE UK
APPLICATIONr Designed to cover large areas, walk-ways and for the
containment of larger spills
FEATURES & BENEFITSr Manufactured from a single layer of meltblown absorbentr Bonded and dimpled for additional strength where indicatedr Perforated down their entire length and width to minimise
waste where indicatedr Different absorbency rates to suit customers requirementsr Reliable performancer Dispensing systems available
HSE RECOMMENDATION ON CHEMICAL SPILLS r Liquid spills involving hazardous materials should first be
contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be tneutralised with appropriate neutralising agents. Please see pages 112 - 113.
Code Icon ref Dimensions W x L
Absorbency per roll litres
SPILKLEEN MAINTENANCE ROLLS
SK-08-103 A,B,C,D,E 30cm x 43m 35
SK-08-102 A,B,C,D,E 50cm x 43m 74
SK-08-110-B A,B,C,E 76cm x 46m 149
SPILKLEEN OIL & FUEL ROLLS
SK-08-205-B A,B,C,D,E 30cm x 43m 29
SK-08-209 A,D,E 38cm x 46m 155
SK-08-208-B A,E 76cm x 46m 310
SPILKLEEN CHEMICAL ROLLS
SK-08-301-B A,B,C,D,E 30cm x 43m 29
* BEST SELLER
AROLLS
BDIMPLED
CPERFORATED
DBOX
EBAG
*
*
*
r SK-08-208-B
r SK-08-301-Br SK-08-103
CONTROLLING A SPILL
Rolls
103
MELTBLOWN SPUNBOND
MADE INTHE UK
APPLICATIONr Designed to cover large areas, workbenches, walkways
and for the containment of large liquid spills
FEATURES & BENEFITSr Highly efficient, excellent performance meltblown
absorbent rollsr Layer of spun-bond material bonded to the top surface
reduces linting where indicatedr Bonded and dimpled for additional strength where indicatedr Perforated down the entire length and width to minimise
waste where indicatedr Floor rolls SC-08-107-B and SC-08-113-B have a protective
backing layer to prevent product leachingr Sticky backed floor rolls adhere to most surfaces and prevent
unwanted movement that may result in a trip hazard, tolerate both foot and forklift truck traffic. Cut to size and shape and easily peeled up when contaminated for quick replacement
r SC-08-207 oil and fuel and SC-08-302 chemical rolls have both surfaces covered with a strong spun-bond polypropylene cover that results in virtually no linting
r Dispensing systems available
* BEST SELLER
Code Description Icon ref Dimensions W x L
Absorbency per roll litres
SPILCHOICE MAINTENANCE ROLLS
SC-08-106 Medium Weight A,B,C,D,E,F 38cm x 46m 74
SC-08-105-B Medium Weight A,B,C,E,F 76cm x 46m 148
SPILCHOICE MAINTENANCE FLOOR ROLLS
SC-08-103 Floor Roll A, E 91cm x 46m 150
SC-08-107-B Black PVC Backed Floor Roll A, E, F 91cm x 46m 75
SC-08-113-B Grey PVC Backed Floor Roll A, E, F 71cm x 46m 165
SC-08-115 Grey Sticky Backed Floor Roll A, E 86cm x 15m 40
SC-08-114 Grey Sticky Backed Floor Roll A, E 86cm x 30m 80
SC-08-117 Blue Sticky Backed Floor Roll A, E 86cm x 15m 40
SC-08-116 Blue Sticky Backed Floor Roll A, E 86cm x 30m 80
SPILCHOICE OIL & FUEL ROLLS
SC-08-209 Medium Weight A,B,C,D,E,F 38cm x 46m 155
SC-08-208-B Medium Weight A,B,C,E,F 76cm x 46m 310
SC-08-207 Non Linting A,B,C,D,E,G 38cm x 46m 90
SPILCHOICE CHEMICAL ROLLS
SC-08-302 Non Linting A,B,C,D,E,G 38cm x 46m 130
*
*
AROLLS
BDIMPLED
CPERFORATED
DBOX
EBAG
FSINGLE SIDED COVERSTOCK
GNON LINTING
r SC-08-208-B
r SC-08-302
r SC-08-103
r SC-08-117
r SC-08-106
r SC-08-113-B
CONTROLLING A SPILL
Cushions
104
MADE INTHE UK
APPLICATIONr Ideal for absorbing liquids in tight restricted spaces
FEATURES & BENEFITSr Spun-bond outer surface that is both fast wicking and toughr The absorbent core is secured into the pillow shape at each
end with a stitched seamr Cushions are used to absorb leaks that may be too large
for a padr Available in boxes or bags
HSE RECOMMENDATION ON CHEMICAL SPILLS r Liquid spills involving hazardous materials should first be
contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be neutralised with appropriate neutralising agents. Please see pages 112 - 113.
Code Dimensions mm
Absorbency per cushion litres
Quantity per pack
SPILKLEEN MAINTENANCE CUSHIONS
SK-06-101 300 x 250 5 20
SPILKLEEN OIL & FUEL CUSHIONS
SK-06-201 300 x 250 2.5 20
SPILKLEEN CHEMICAL CUSHIONS
SK-06-301 300 x 250 3.75 20
* BEST SELLER
SPUNBOND FABRIC
CUSHION BOX BAG
*
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
CONTROLLING A SPILL
Cushions
105
MADE INTHE UK
APPLICATIONr Ideal for absorbing spills in tight spaces and areas that are
difficult to access such as under machinery and around hydraulic hoses
FEATURES & BENEFITSr Strong knitted fabric structure allows for durability
and expansionr Filled with a super absorbent polymerr Ability to contain large quantities of fluids once absorbedr The large surface area reduces clean up timesr The absorbent core is secured into the pillow shape at each
end with a stitched seamr Available in boxes or bags
Code Dimensions mm
Absorbency per cushion litres
Quantity per pack
SPILCHOICE MAINTENANCE CUSHIONS
SC-06-101 350 x 300 6 20
SPILCHOICE OIL & FUEL CUSHIONS
SC-06-201 350 x 300 4 20
SPILCHOICE CHEMICAL CUSHIONS
SC-06-301 350 x 300 4 20
* BEST SELLER
CUSHION BOX BAG
KNITTED FABRIC
*
CONTROLLING A SPILL
Socks
106
MADE INTHE UK
APPLICATIONr Used as a barrier to encircle a spill or placed around the
base of drums and machinery to absorb any nuisance leaks or drips
FEATURES & BENEFITSr Spun-bond polypropylene outer sleever Absorbent corer Stitched ends secure the core into the outer spun-bond
sleever Available in boxes or bags
HSE RECOMMENDATION ON CHEMICAL SPILLS r Liquid spills involving hazardous materials should first be
contained to prevent spread of the material to other areas. Once the hazardous material has been contained the material should be neutralised to render it safe. Acids and alkalis should be neutralised with appropriate neutralising agents. Please see pages 112 - 113.
Code Dimensions mm
Absorbency litres per sock
Quantity per pack
SPILKLEEN MAINTENANCE SOCKS
SK-09-101 1000 x 75 3.75 50
SK-09-102 1200 x 75 4 20
SK-09-103 1200 x 75 4 8
SK-09-104 3000 x 75 11 8
SPILKLEEN OIL & FUEL SOCKS
SK-09-201 1000 x 75 4 50
SK-09-202 1200 x 75 4 20
SK-09-203 3000 x 75 11 8
SPILKLEEN CHEMICAL SOCKS
SK-09-301 1200 x 75 3.75 20
SK-09-302 3000 x 75 9 8
* BEST SELLER
SOCKS BOX BAG
SPUNBOND FABRIC
*
*
*
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CHEMICAL Yellow in colour, designed to absorb aggressive fluids including acids and alkalis. Recommended for internal use.
CONTROLLING A SPILL
Socks
107
MADE INTHE UK
APPLICATIONr Ideal for demanding environments where fast recovery of
liquid spills is essential FEATURES & BENEFITSr Strong tubular knitted outer fabric sleeve allows for
durability, expansion and improved speed of absorptionr Filled with a super absorbent polymer that will absorb many
times its own weight in fluidr Super absorbent core retains all the liquids absorbed r Stitched ends secure the core into the knitted cylindrical
sleever Available in boxes or bags
Code Dimensions mm
Absorbency litres per sock
Quantity per pack
SPILCHOICE MAINTENANCE SOCKS
SC-09-101 1200 x 100 5 20
SC-09-102 1200 x 100 5 8
SC-09-103 3000 x 100 12 8
SC-09-104 3000 x 120 5 1
SPILCHOICE OIL & FUEL SOCKS
SC-09-201 1200 x 100 4.5 20
SC-09-202 1200 x 100 4.5 8
SC-09-203 3000 x 100 12 8
SPILCHOICE CHEMICAL SOCKS
SC-09-301 1200 x 100 4 20
SC-09-303 1200 x 100 4 8
SC-09-302 3000 x 100 10 8
* BEST SELLER
SOCKS BOX BAG
KNITTED FABRIC
*
*
*
CONTROLLING A SPILL
Water Guard Flat Sock
108
MADE INTHE UK
APPLICATIONr Industry sectors include
industrial MRO, cleaning, janitorial, fleet management, health care, plumbing and heating and marine
FEATURES & BENEFITSr Extremely portable, ideal where an immediate
response is required for dealing with spillsr Lay flat, super absorbent strip only expands when in
contact with water or water based liquidsr Extremely low profile allows the product to access hard
to reach restricted areasr Distinctive, highly visible colour reduces the risks of
slip and trip conditionsr Easy to use, simply tear at the perforations for economy
of user Non-drip even when fully saturatedr Prevents damage due to leaks, spills and condensation
in propertyr Compact storage, supplied in a handy dispensing boxr Contents of box 25 x 1.2m long strips, minimum
absorbency of box 75 litres
Code Dimensions mm
Absorbency litres per strip
Quantity per pack
SPILL KILL WATER GUARD
FL-151-120 125 x 1200 3 25
BOX PERFORATED
r Flat r Inflated
NEW
Recycled Maintenanceand Oil & Fuel Pads
109
APPLICATIONr Suitable for absorbing most oil and water based liquid spills
FEATURES & BENEFITSr Grey in colourr Manufactured from 95% renewable and recycled materialr Remain extremely strong when saturatedr Reduced lintingr Absorbs 30% more water fluids than polypropylene
absorbentsr Internal use onlyr Available in boxes or bags
Code Description Icon ref Dimensionscm
Absorbency per pad litres
Quantity per pack
SPILKLEEN MAINTENANCE PADS
SK-05-108 Recycled Coldform Pad A, B, C 40 x 46 0.57 100
APADS
BBOX
CBAG
MADE INTHE UK
APPLICATIONr Suitable for absorbing petroleum based liquid and for the
selective recovery of oil from water
FEATURES & BENEFITSr White in colourr Manufactured from 85% renewable and recycled materialr Remain extremely strong when saturatedr Absorbs 25% more oils than polypropylene absorbentsr Suitable for internal and external user Available in boxes or bags
Code Description Icon ref Dimensionscm
Absorbency per pad litres
Quantity per pack
SPILKLEEN OIL & FUEL PADS
SK-05-207 Recycled Coldform Pad A, B, C 40 x 46 0.9 100
APADS
BBOX
CBAG
Maintenance Pads Oil & Fuel Pads
MAINTENANCE Grey in colour, suitable for absorbing most types of industrial spills including both oil and water based liquids including solvents, coolants and mild chemicals. Recommended for internal use.
OIL & FUEL White in colour, ideal for where the absorption of oil based liquids such as fuels, lubricants and other hydrocarbon based products is required and for the selective recovery of oil from water. Recommended for external use.
CONTROLLING A SPILL
Spill Mates
110
MADE INTHE UK
APPLICATIONr Specifically for production and maintenance areas
that require immediate accessibility to absorbents
FEATURES & BENEFITSr Constructed from 1.5mm thick mild steelr High quality powder coating prevents rustingr Extremely mobile, easily relocated in the workplace to
meet demandr Steel locking castors on mobile optionsr Glove/accessory cradle fitted to both sidesr Allows absorbent products to be dispensed easily
and quicklyr Visibility of stock levels for re-stocking purposes
Code Description Applications DimensionsH x W x D mm
Weight kgs
SPILLMATES
FL-41-106 Wall Mounted Dispenser
Pads 35 x 40cm, Rolls 300mm wide
700 x 605 x 355 9
FL-41-105 Mobile 3-Part Dispensing System
Pads 35 x 40cm, Rolls 300mm wide, all socks
1500 x 560 x 680 35
FL-41-108 Mobile 3-Part Dispensing System
Pads 38 x 50cm, Rolls 500mm wide, all socks
1500 x 650 x 700 42
r FL-41-105
r FL-41-106
CONTROLLING A SPILL
Absorbent Roll Dispensing Stations
111
MADE INTHE UK
APPLICATIONr Specifically for production and maintenance areas that
require immediate accessibility to absorbents
FEATURES & BENEFITSr Constructed from 1.5mm thick steelr Model FL-41-404 is supplied with 2 x standard and
2 x locking wheelsr Allows absorbent rolls to be dispensed easily and quicklyr Visibility of stock levels for re-stocking purposes
Code Description Roll Dimensions Weight kgs
ROLL DISPENSERS
FL-41-401 A-Frame Mobile 30 to 50cm wide 5
FL-41-402 A-Frame Static 30 to 50cm wide 4
FL-41-403 Wall Mounted 30 to 50cm wide 3
FL-41-404 Vertical Mobile 76 to 100cm wide 7
r FL-41-404
r FL-41-401
r FL-41-402
r FL-41-403
CONTROLLING A SPILL
Safe Chemical Spill Response
112
HSE recommendation on chemical spills r Liquid spills involving hazardous materials should first be contained to prevent the spread of the material to other areas. r Once the hazardous material has been contained the material should be neutralised to render it safe. r Acids and alkalis should be treated with appropriate neutralising agents. Due to the differing properties of the various
groups of chemical, an appropriate treatment strategy with suitable chemicals should be established in each case.r Treated material should be absorbed onto inert carrier material to allow the material to be cleared up and removed
to a safe place for disposal or further treatment as appropriate. r Once the material has been treated the cleared up area should be washed with large volumes of water
r Vytac neutralisation products are recognised as an important element of spill response safety.r Vytac’s unique colour indicator systems allow for safe, easily visualised neutralisationr Disposal costs can be reduced by converting hazardous waste into general waste
ACID NEUTRALISATION
SODIUM HYDROXIDE NEUTRALISATION
FOR CHEMICAL SPILLS GREATER THAN 20 LITRES r Call Spill Response Teamr Spill Training for chemical spills accredited by British Safety Industry Federation is available for operatives handling chemicals.
FOR CHEMICAL SPILLS UP TO 20 LITRES1. Vacuum the spilled chemicals using a chemical wet vacuum2. Dispense the aggressive chemical into a container for treatment3. Dilute the chemical to the required dilution to prevent heat
build up
4. Add the appropriate Vytac neutraliser until the colour change indicator shows neutralisation is complete
5. Dispose of the neutralised non hazardous chemical through general waste system.
On adding Vytac ACX to an acid, the pale pink/orange colour will gradually change. Continue to add and mix Vytac ACX until the colour is permanently red indicating a neutral solution.
On adding Vytac CS to an alkali, the purple colour will gradually change. Continue to add and mix Vytac CS until the colour is permanently dark yellow.
Acid Vytac ACX Alkali - Vytac CS
CHEMICAL NEUTRALISATION PROCEDURES
FOR SMALL CHEMICAL SPILLS1. Identify appropriate neutralisation2. The application should commence from the outside of the spill, working inwards as this reduces the risk of the responder contacting
untreated material3. Sprinkle neutraliser on chemical until desired colour change indicates complete neutralisation4. The non hazardous compound can now be swept up and disposed of through the general waste system
CONTROLLING A SPILL
A DIVISION OF CARTIER CHEMICALS
Chemical Spill Neutralisation Products
113
APPLICATIONr Vytac ACX Acid Neutraliser quickly and
effectively neutralises acid spills. r Vytac CS Alkali Neutraliser neutralises liquid
caustic spills. r Vytac JCN Bleach Neutraliser is a neutraliser
for sodium hypochlorite. r Vytac FAS and FNC2 Formaldehyde
Neutralisers quickly and efficiently absorb the vapours and immobilise formaldehyde spills.
r Vytac MVS and MIS Mercury Neutralisers quickly and efficiently absorb the vapours and immobilise mercury spills.
Code Type Pack Size
VYTAC CHEMICAL SPILL NEUTRALISATIONFL-12-201 Acid 1 x 1 kg
FL-12-202 Acid 4 x 4 kg
FL-12-203 Acid 22.7 kg pail
FL-12-204 Alkali 1 x 0.9 kg
FL-12-205 Alkali 4 x 3.7 kg
FL-12-206 Alkali 22.7 kg pail
FL-12-207 Bleach 1 x 0.58 kg
FL-12-208 Mercury 14 kg
FL-12-209 Formaldehyde 1 x 0.2 kg
FL-12-210 Formaldehyde 1 x 1 litre
CHEMICAL SPILL NEUTRALISATION STATIONSFL-204-010 Static
FL-204-009 Mobile 660 litre wheeled bin
Chemical spill neutralisation stations include all the equipment for dealing with chemical spills.
APPLICATIONr Designed to address the needs of specialist operations requiring a continuous
collection and discharge of bulk liquid such as salvage work, liquid spills and flood damage
FEATURES & BENEFITSr Structofoam construction Single Twinflo’ power head float valve and trash basket
inlet filter system r Fully automatic submersible pump unit with its own Hi/Lo level float control
allows continuous suction and discharge operation r 10m discharge hose to assist with the water disposal r Motor power 230V AV 50/60Hz r Capacity wet 32 litres r Cleaning range 26.8 metresr Weight 25kgsr Complete with accessory kitr Aggressive chemicals must be neutralised first before attempting to vacuum
Code Description
CHEMICAL VACUUM CLEANER
FL-204-024 Vacuum Cleaner 230V
Wet & Dry Chemical Vacuum Cleaner
CONTROLLING A SPILL
A DIVISION OF CARTIER CHEMICALS
Dewatering BagsPipe Socks
114
APPLICATIONr Filtering contaminants from a water source to prevent
pollution of waterways
FEATURES & BENEFITSr Manufactured from Ultra-X-Tex, 100% recycled materialr Light, compact and easy to storer Allows water to pass through while absorbing liquid
hydrocarbons including petroleum, animal/vegetable oils and sediment
r Single use only
MADE INTHE USAMADE IN
THE USA
Code Containment Capacity Litres
Dimensions L x Dia mm
Weight kgs
ULTRA OIL & SEDIMENT PIPE SOCKS
UL-42-350 6.4 1524 x 204 1
UL-42-351 9.8 1524 x 305 1.5
UL-42-352 13.2 1524 x 407 2
APPLICATIONr Effective solution to collect harmful sediments from dirty
water pumped out of excavation works that would otherwise pollute the surrounding environment
FEATURES & BENEFITSr Sediment-laden water is simply pumped into the filter
bags, which trap the solids inside and allows the filtered water to flow freely out through the geotextile fabric to disperse into the surrounding ground
r Light, compact and easy to storer Accommodates up to 102mm diameter discharge hoser Single use only
Code Containment Capacity Litres
Dimensions L x W mm
Weight kgs
ULTRA DEWATERING BAGS
UL-42-300 510 1829 x 1829 2.5
UL-42-301 4247 3048 x 4572 11.5
Pipe Socks
Dewatering Bags
NEW
115
Oil Absorbent Booms
APPLICATIONr Designed for the most demanding oil recovery operations in both fresh and
sea water spills
FEATURES & BENEFITSr Comprising an outer plastic netting that contains a spun-bond inner sock r Absorbent core is manufactured from very fine meltblown fibres allowing
more oil to penetrate deeper into the centrer A tough nylon rope runs the entire length of the boom for additional strengthr Doubled stapled ends for increased strengthr Rust proof metal rings and snap hooks enable
booms to be joined together to form long runs
Code Dimensions Length x Dia mm
Containment Capacity LitresPer Boom
Quantity Per Pack
SPILCHOICE OIL ABSORBENT BOOMS
SC-01-002 3000 x 120 40 4
SC-01-004 1500 x 200 25 8
SC-01-003 3000 x 200 50 4
SC-01-005 5000 x 200 84 2
MADE INTHE UK
APPLICATIONr Developed for the containment and absorption of
oil spills and debris in rivers and harbours
FEATURES & BENEFITSr Rope runs the entire length of the boom for
additional strengthr Rust-proof metal rings and snap hooks enable
booms to be joined together to form long runsr Remains intact even if the outer mesh is tornr Remains afloat even when fully saturatedr Easy to deploy and can be used in fast
moving rivers and canals for thick oil absorption
Vertex Oil Absorbent Booms
Oil Absorbent Booms
Code Dimensions Length x Dia mm
Containment Capacity LitresPer Boom
Quantity Per Pack
VERTEX OIL ABSORBENT BOOMS
SC-01-006 3000 x 200 53 4
SC-01-007 5000 x 200 85 2
CONTROLLING A SPILL
Oil Absorbent Skirted Boom
116
MADE INTHE USAMADE IN
THE USA
APPLICATIONr Designed to capture floating and
submerged oil at sea in harbours, lakes and canals and prevent contamination of the surrounding shore line
FEATURES & BENEFITSr Constructed from Ultra-X-Tex fabricr Allows water to pass through freely
while filtering any oil present r 850mm deep weighted skirt hangs
below the boom capturing any oil that is under the water but close to the surface
r Additional 1524mm skirt can be quickly added for deeper water protection
r Multiple booms can be connected for long, continuous runs and easy deployment and retrieval
r Floats on the surface of the water with a 150mm dia closed cell foam float
r Ultra Microbes can be added to provide a bio-remediation element if required
Code Description Dimensions Length x Depth mm
Containment Capacity Litres
Weightkgs
ULTRA OIL FILTER SKIRTED BOOM
UL-42-356 Boom 4000 x 850 41.5 9
UL-42-357 Extension Skirt 4000 x 1524 41.5 5.5
Oil Absorbent Skirted Boom
APPLICATIONr Designed to capture floating oil at sea in harbours, lakes
and canals and prevent it contaminating the surrounding shore line
FEATURES & BENEFITSr Constructed from Ultra-X-Tex fabricr Allows water to pass through freely while filtering any
oil present on the waters surfacer Booms can be connected with 300mm overlap to ensure
maximum containment and coverager Float on the surface of the water via an internal closed
cell foam floatr Boom is contained in a chemical resistant mesh nettingr Ultra Microbes can be added to provide a bio-remediation
element if required
Code Dimensions Length x Dia mm
Containment Capacity Litres
Weight kgs
ULTRA OIL FILTER BOOM
UL-42-354 1800 x 125 19 2.6
Oil Absorbent Boom
NEW
Oil Absorbent Spill Fence
117
MADE INTHE USAMADE IN
THE USA
APPLICATIONr Designed to protect shorelines, riverbeds and
environmentally sensitive areas from oil spills
FEATURES & BENEFITSr Manufactured from Ultra-X-Tex material to allow tidal
water to flow through the fabric while absorbing any oilr Wire backing provides additional support and strength to
the tidal push back and forth r Captures oil on the surface of the water and in addition
sub-surface oil
Code Dimensions Length x Depth mm
Containment Capacity Litres
Weight kgs
ULTRA OIL ABSORBENT SPILL FENCE
UL-42-360 4900 x 1200 28 13.6
APPLICATIONr Designed to protect shorelines and beaches from oil spills
FEATURES & BENEFITSr Blanket will tumble in the
surf and remove all oil from the water as it passes through the fabric
r Replacement blankets available
Code Description Dimensions Length x Width mm
Containment Capacity Litres
Weight kgs
ULTRA OIL ABSORBENT BLANKET
UL-42-358 Oil blanket with 25 x tethers and 2 x wood-en stake anchors
3000 x 1500 14.7 5.4
UL-42-359 Replacement blanket, no tethers or anchors
3000 x 1500 14.7 4.1
Oil Absorbent Blanket
Oil Absorbent Spill Fence
NEW
Marine Booms
118
APPLICATIONr Ideal emergency response containment boom for
deployment in calm or sheltered waters such as ponds, dams, protected harbours and inland waterways
FEATURES & BENEFITSr Lightweight, compact, easy to handle, impervious (non
absorbent) boomr Closed cell foam buoyancy chamber makes boom less prone
to sinkingr Easy to store and deploy, taking up minimal storage space
due to its ability to fold back on itself (concertina)r Ballast is provided by an enclosed galvanised chainr Multiple booms can be connected via the cleat
and eyelet fittingsr Easy to cleanr Available in 3, 5 and 10m lengths all 250mm highr Available in 5, 10, 15, 20 and 25m lengths and
450, 600, 750 and 900mm heights
PVC Fence Boom
APPLICATIONr Suitable for off-shore and harbour use
FEATURES & BENEFITSr Manufactured from heavy duty PVC fabricr Extremely high abrasion resistancer Single air chamber per section lengthr Multiple booms can be connected to form long sectionsr Ballast is provided by an enclosed galvanised chain with
anchor points at each endr Available in 5, 10, 15, 20 and 25m lengths and 600,
750, 900, 1200 and 1500mm heightsr Petrol operated boom air inflator available
APPLICATIONr Suitable for use with all fence and inflatable booms
FEATURES & BENEFITSr Manufactured from steel box section to form an A-framer Forklift pockets in base for easy transportr Manual or powered options available
Inflatable Booms
Boom Reel
MADE INTHE UK
CONTROLLING A SPILL
Marine & Inland Water Oil Skimmers
119
MADE INTHE UK
APPLICATIONr For recovering oil from water used in conjunction with
booms and storage tanks.
FEATURES & BENEFITSr For effective skimming of oil in shallow waters (min. depth 10cm)r Lightweight design and large weiring arear Strong and durable with non corrosive adjustable floats
Code
FL-01-005
Delta Head Oil Skimmer
APPLICATIONr For recovering oil from water used in conjunction with
booms and storage tanks.
FEATURES & BENEFITSr For effective skimming of oil in inland waters, harbours, estuaries and calm seasr Highly effective on heavy oilsr Strong and durable with non corrosive adjustable floats
Code
FL-01-006
Weir Skimmer
APPLICATIONr High volume system for oil and oil emulsion clean up or dry products
FEATURES & BENEFITSr No electrical spark risk, compressed air poweredr High volume 4.5 litres per secondr Liquid direct from hose to drum, no contact of pollutant with power
head, no potential damager Low maintenance, no moving partsr Utilises standard 200 litre drumsr For corrosive chemicals a plastic liner can be inserted in the drum
Code Name Drum Hose Diameter
Air Vol Pressure Suction Volume Weight kgs
PORTABLE VACUUM SYSTEM
FL-204-011 Standard 100 200 ltr 50mm 100cfm 100psi 17” Hg 120cfm 23
FL-204-012 Standard 60 200 ltr 37.5mm 60cfm 100psi 16.5” Hg 85cfm 23
FL-204-013 Dual Vac 200 ltr 50mm 200cfm 100psi 17” Hg 17cfm 32
Portable Vacuum System
CONTROLLING A SPILL
Roof Drip Diverters
120
APPLICATIONr Catches water from leaks in the roof and diverts it away
to a drainage point avoiding damage to equipment and property
FEATURES & BENEFITSr Manufactured from lightweight vinyl coated fabricr Heavy-duty grommets in each cornerr Simple and quick installation, ideal for use in an
emergencyr Avoids fluid on the floor and eliminates possible slip
hazards r Bungee cords and drainage hose not included
MADE INTHE USAMADE IN
THE USA
Code Description Dimensions L x W mm
Weight kgs
ULTRATECH ROOF DRIP DIVERTERS
UL-34-117 Roof Drip Diverter 1524 x 1524 1
UL-34-118 Roof Drip Diverter 2134 x 2134 2
UL-34-121 Roof Drip Diverter 3048 x 3048 3.5
UL-34-119 Roof Drip Diverter 3658 x 3658 7
UL-34-120 Roof Drip Diverter 4572 x 4572 10
UL-34-122 Roof Drip Diverter 6096 x 6096 16
UL-34-126 Drainage Hose Clear 7.6m
UL-34-125 Adj Bungee Cord Pack of 4
UL-34-124 Rubber Strap Kit Pack of 4
r UL-34-126 r UL-34-125 r UL-34-124
NEW
121
MADE INTHE UK
Water Guard Flood Protection
APPLICATIONr Industry sectors include
industrial MRO, cleaning, janitorial, fleet management, health care, plumbing and heating and marine
FEATURES & BENEFITSr Extremely portable, ideal where an immediate
response is required for dealing with spillsr Lay flat, super absorbent strip only expands when in
contact with water or water based liquidsr Extremely low profile allows the product to access hard
to reach restricted areasr Distinctive, highly visible colour reduces the risks of
slip and trip conditionsr Easy to use, simply tear at the perforations for economy
of user Non-drip even when fully saturatedr Prevents damage due to leaks, spills and condensation
in propertyr Compact storage, supplied in a handy dispensing boxr Contents of box 25 x 1.2m long strips, minimum
absorbency of box 75 litres
Code Dimensions mm
Absorbency litres per strip
Quantity per pack
SPILL KILL WATER GUARD
FL-151-120 125 x 1200 3 25
BOX PERFORATED
r Flat r Inflated
NEW
Flood Protection
122
APPLICATIONr Suitable for domestic and industrial water based fluid
leaks and spills including leaky pipes, bleeding radiators, faulty appliances and general spills
FEATURES & BENEFITSr Once in contact with water, the pad locks in any fluid that
it comes into contact with r Plastic backing prevents damage to carpets and flooringr Contains super-absorbent polymer and pulp that are both
eco-friendly and degradable once disposed ofr Compact size enables it to be used for general
maintenance, small spills, and residual water absorbance
Code Description Dimensions L x W mm
Absorbency litres per pad
PLUMBPADS
FL-151-007 Plumbpad Pack of 2 440 x 190 2
FL-151-006 Plumbpad Pack of 25 440 x 190 2
APPLICATIONr Suitable for absorbing all domestic and industrial water
based fluid spills
FEATURES & BENEFITSr Super absorbent polymer and pulp are both eco-friendly
and degradable once disposed ofr Slip hazard warning symbols are printed on the face of the
matr Plastic backing prevents damage to carpets and flooring
Code Description Dimensions L x W mm
Absorbency litres per mat
PLUMBMAT
FL-151-008 Plumbmat Pack of 2 900 x 600 5
Plumbpad
Plumbmat
MADE INTHE UK
NEW
Flood Protection
123
MADE INTHE UK
HydroSack
APPLICATIONr Creates an effective barrier to the threat of low level flood
water in all properties
FEATURES & BENEFITSr Manufactured from a non woven, polypropylene,
hydrophilic finish r Two handles for easy lifting after use r Inflation time in water 2-3minutesr Weight before inflation 0.5 kilo, after inflation 20 kilor Flat packed for compact storage, easily transported in a
vehicler Quick and easy handling and deployment r Absorbed water cannot escape even if the sack is piercedr Non-toxic and environmentally friendlyr After the flood waters have subsided the contents can be
deposited in to soil beds
Code Description Dimensions L x W mm
Containment capacity litres
HYDROSACKFL-151-003 HydroSack Pack of 2 600 x 480 20
HydroSnake
APPLICATIONr Creates an effective barrier to the threat of low level flood
water in all properties
FEATURES & BENEFITSr Manufactured from a non woven, polypropylene,
hydrophilic finish r Inflation time in water 2-3minutesr Weight before inflation 0.5 kilo, after inflation 20 kilor Flat packed for compact storage, easily transported in a
vehicler Quick and easy handling and deployment r Absorbed water cannot escape even if the snake is piercedr Non-toxic and environmentally friendlyr After the flood waters have subsided the contents can be
deposited in to soil bedsCode Description Dimensions
L x W mmContainment capacity litres
HYDROSNAKEFL-151-009 HydroSnake Pack of 2 1450 x 250 20
THE PROBLEM WITH SANDBAGS
r Flood management has been typically dealt with by the use of sandbags
r They need to be filled prior to use which can be time consuming
r They are heavy and difficult to carry weighing approximately 15-20 kilos
r Sandbags leak and filter water through themr They carry infectious diseases emanating from polluted sewage
waterr Sandbags are not easily disposed of after user They are ineffective as a barrier
NEW
Training Education &LegislationThe Spill Training Academy provide BSIF accredited courses presented by skilled, professional trainers with current, close experience in spill control with the object of enhancing the awareness and skills of operatives.
Courses provide an awareness of the risks and threats and how to deal with any emergencies.
Courses can be held at the clients location or at our dedicated training facility in Leicester
Providing accredited and comprehensive spill training courses for the protection of people, the environment
and business equity
www.thespilltrainingacademy.com
PROTECTION THROUGH EDUCATION
125
126
Featuresq Develop an awareness of the risks and threats
associated with liquid spillsq Understanding of the safe and effective use of spill
control resourcesq Simulated emergency spill situationq Containment techniques and evaluation of best
practice
Benefitsq Improvement in operative training and
spill awarenessq Reducing environmental incidents on siteq Compliance with environmental legislationq Delegates gain BSIF accreditation in spill
control and awareness
Course ContentA Spill Awareness DVD to introduce the subject, covering relevant environmental issues with spills, reasons for spill control, legislation, procedures and emergency response action plans.
Coverage of the products available for storage, handling and dispensing of liquids as well as sorbent products for containing and dealing with spills and personal safety issues.
Detailed discussion of the principles of Best Practice with liquid storage, drain protection, legislation covering storage and handling of liquids including the penalties associated with breaches.
Demonstration of relevant products including sorbents to British Standards, emergency spill kits and ready use dispensing stations.
Simulated Spill exercise conducted in a suitable outside location
Final Test covering all aspects raised in the course
Summary and Final Discussion
Duration: Half DayLocation: At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size: Max 12
Validity: 3 Years
COURSE:
BSIF Accredited 1st Responder Spill Awareness and Response Course
TRAINING EDUCATION &LEGISLATION
127
Featuresq As the BSIF Accredited 1st Responder Courseq Enables the Trainer to train their team members in
the basics of spill awareness and response, based on the BSIF Accredited 1st Responder Course.
q Gives experienced managers and supervisors the fundamental tools to train their staff in oil and chemical spill awareness, prevention and response
q Post qualification support available through secure field on website and telephone hotline.
Benefitsq As the BSIF Accredited 1st Responder Courseq An effective method of training operators in
companies with large staff numbers, high staff turnover and seasonal agency workers
q Cost efficientq Course delegates gain BSIF Accreditation in
spill control, awareness and response
Course ContentAs the BSIF Accredited 1st Responder CourseThe Principles of Training and delivering a Training EventDetailed Review of all aspects of the BSIF Course Explanation of the Course notes, presentation materials and equipment packsCommunication exercises – to emphasise the importance of clear and concise communicationExamine why operatives / staff need training in spill awareness and responseRole play – delegates will be encouraged and guided to talk about the different aspects of the 1st Responder CourseTest Presentation – each delegate will be guided to give their own presentation on the subjectFinal Summary
Duration: One DayLocation: At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size: Min 6 - Max 12
Validity: 3 Years
Training Material q Spill Training DVDq Course Manual and Information Pack for the
trainer and any subsequent traineesq Table Top Sorbent Demonstration Kit
q Sorbent Presentation samples q One Complete Outdoor Simulated Spill Kitq Post Course Technical Helpline
COURSE:
Train The Trainer Spill Awareness and Response Course
TRAINING EDUCATION &LEGISLATION
COURSE:
Marine Oil Spill Response Training Courses
Target Groupq This course is intended to provide a general
introduction and awareness to all those involved in marine, port and offshore operations that may lead to a release of pollutants.
Objectivesq This course provides a general
introduction and awareness to oil spills in the marine and shoreline environment. It addresses the preparedness and response options available to an oil pollution incident in the context of the current best practices and thinking in the response to an oil spill.
Course Contentq Introduction to oil spills
q Fate and behaviour of oil in the marine and shoreline environment
q Impact of oil spills
q The work of IMO
q International land national legislation
q Oil spill response preparedness
q Understanding and assessing risk
OPRC, the International Convention on Oil Pollution Preparedness, Response and Cooperation, 1990, required the development of a comprehensive training programme in the field of oil pollution preparedness and response. In this regard training courses were developed by the International Maritime Organisation (IMO) and, in the UK, accredited by the Nautical Institute on behalf of the Maritime and Coastguard Agency.
Oil Spill Response Course IMO Level 0
Duration: 1 DayLocation: At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size: Max 12
Validity: 3 Years
Pre-course requirementThis course assumes that the participants have no experience in oil spill response or oil spill response preparedness but need an awareness of these subjects.
128
TRAINING EDUCATION &LEGISLATION
COURSE:
IMO Oil Spill Response Train The Trainer Course
Target Groupq Designed for all personnel who may be called
upon to act as an oil spill first responder and to participate in an oil spill response clean up.
Objectivesq Delegates will gain an understanding of
the weathering process of oil in the marine environment, be able to implement an efficient shoreline clean-up utilising different response techniques, selecting appropriate equipment and managing spill response teams on-site
Course Contentq Site and Risk Assessments
q Health and Safety aspects
q Selecting and implementing clean-up strategies
q Environmental issue in spill response
q Waste disposal
q Managing spill response teams
q Record keeping
q Practical exercises and demonstrations
q Theoretical exercises
Oil Spill Response Course IMO Level 1
Duration: 4 DaysLocation: At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size: Max 12
Validity: 3 Years
Pre-course requirementIt would be an advantage for delegates to have some knowledge or prior study of oil spill responses issues and techniques
129
TRAINING EDUCATION &LEGISLATION
Target Groupq Designed for all senior managers and officials who
may be involved in planning for or managing the response to an oil spill.
Objectivesq Delegates will gain an understanding of the
complexities of oil spill management and consider the political and media pressures, the legal and financial implications, the issues of public and response personnel safety and the post operational requirements.
Course Contentq Effective response organisationsq Causes, fate and consequences of oil spillsq Roles of Government and other
key stakeholdersq Legal frameworks and international conventionsq Liability for claims and compensations
q Risk Assessment and contingency planningq The Incident Controllerq Response Optionsq Operational limitations of response strategiesq Resource requirementsq Terminating a responseq Media awarenessq Theoretical exercises
Oil Spill Response Course IMO Level 3
Duration: 4 DaysLocation: At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size: Max 12
Validity: 3 Years
Pre-course requirement: Whilst not compulsory, participants are encouraged to take the IMO Level 2 course before attending.
Target Groupq Designed for all managers/supervisors who will
lead or supervise oil spill response teams and those with support responsibilities within an incident command or emergency team.
Objectivesq Delegates will gain an understanding of the safe
and efficient response to oil spills, be able to undertake initial assessments of spill risk, initiate a suitable response, identify priorities for protection, chose the correct response options, identify the limitations of response options and equipment and understand the needs of the media.
Course Contentq Causes and fate of oil spillsq Environmental issuesq Contingency planning and Health and Safety
aspectsq Oil Spill management and response
q Use of detergentsq Containment recovery and protectionq Shoreline clean-upq Waste handling and disposalq Terminating responseq Post response operationsq Media handlingq Practical exercises and demonstrationsq Theoretical exercises
Duration: 4 DaysLocation: At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size: Max 12
Validity: 3 Years
Pre-course requirement: Whilst not compulsory, participants are encouraged to take the IMO Level 1 course before attending.
Oil Spill Response Course IMO Level 2
COURSE:
Oil Spill Response Course IMO Level 2 & 3
130
TRAINING EDUCATION &LEGISLATION
Target Groupq This course is designed as an introduction
to training for those with a technical understanding of oil spill response, but who need tuition in instructional techniques including the formal development and delivery of IMO – OSR Training Courses.
Objectivesq The programme is based on tested training
principles. Participants are videotaped and given timely and constructive feedback on their work. By the end of this course participants will have the skills to design a training programme, highlight the key objectives of the sessions, organise the logistics of a training session, deliver the training to desired objectives, coach individuals and groups and be able to evaluate the training effectiveness
Course Benefitsq By the end of this course delegates
will be able to:q Be an accredited in-house trainerq Structure their training to deliver
stated objectivesq Project credibility in their deliveryq Deliver training in an interesting and
informative mannerq Deal with difficult situations or individualsq Be able to evaluate the effectiveness of the
trainingq Course manual and Information pack for
Trainer and any subsequent traineeq Post-Course Technical Helpline
Course Contentq The principles of learning & motivation q Stages of learning & learning styles q Training aims and objectives q Structuring training q Running training effectively q Delivery skills q Assessment techniques q Practical exercises q Theoretical exercises
Duration: 2 DaysLocation: At client’s location of choice or the Spill Training Academy, Leicestershire
Group Size: Min 6 -Max 12
Validity: 3 Years
Pre-course requirementParticipants must have completed, and be fully conversant with the relevant IMO Model Course for which they require development as a trainer.
COURSE:
Marine Oil Spill Response The Trainer Course
131
TRAINING EDUCATION &LEGISLATION
Site Survey Assessment
Responsibility for the correct handling and storage of liquids lies with the owner organisation (including protection from wilful acts of vandalism). The pollution of both land and water is regulated against by law and whether accidental or deliberate, can result in prosecution leading to fines and other related costs both tangible and intangible (i.e. damage or harm to both image and reputation).
The Environment Agencies policy is to vigorously pursue prosecution of both company and individuals responsible for any infringements of these regulations.
We are able to assist you in identifying your needs and requirements and in finding solutions to your spillage problems with the following service.
A site assessment of your company’s current status to deal with a significant spill. The assessment key aims are to:
q Review all aspects of spillage response on site including liquid types and quantities
q Review how liquids are handled and stored, particularly the condition and suitability of secondary containment systems or fixed bunds
q Identify potential routes for the escape of liquids from site
q Identify potential spill hazards and or sensitive areas
q Audit current spillage response products and equipment
q Identify any shortcomings or non-compliance with statutory regulations/legislation
q Provide a comprehensive report incorporating images, recommendations for proposed additions and improvements. Please see example on the following pages
q Address specific training needs
This report can help provide the basis for an Environmental Management Spill Contingency Plan and can be used towards your ISO 14001 compliance to improve upon your sites current level of spill awareness and response.
Please contact your local distributor to arrange a site visit by one of our experienced spill control specialists.
133
Spill Risk Site Assessment Report
Company Name EHS Manager Total Points Possible 100
Location Contact Details Total Points Relative 0
Main Business Activity Date Current Status
1 Drain Protection Yes/No Points Possible
Drainage plan up to date and available 8
Drain sealing system in place 8
Alarmed and monitored 2
Feeder drains protected 2
LR -‐ Legal Requirement Foul and surface water colour coded 8Protected against debris/oil
contamination2
Drain covers available 6
Supervision procedures in place for bulk liquid discharge
4
2 Liquid Storage Points Possible
LR -‐ Legal Requirement Single skin tanks bunding effective 8
LR -‐ Legal Requirement Secondary containment provision 8
Secondary Containment provision 3Hazardous liquids 4
3 Consumable Absorbents Points Possible
Easy availability for dispensation 5
Emergency Spill Provision
Emergency spill plan availability 2
Spillkits
Correct number of spill kits 5
Appropriately located 5
Spillkit labels and station signs 2
Audit procedure in place 4
4BSIF Acredited Spill Awareness and
Response TrainingPoints Possible
1st Responder Spill Awareness and Responder Course
5
Train The Trainer Spill Awareness and Responder Course
5
5 Environmental Policy Points PossibleEmergency Spill Response Procedure
Displayed2
Emergency spill response team displayed 2
LR -‐ Legal Requirements
Bulk tanks bunding
IBC and Drum storage outside
Inside Storage
Absorbents for regular use
Comments
Comments
Spill Risk Site Assesment Report
The purpose of the Spill Risk AssessmentReport is to establish a benchmark among companies for correct procedures when dealing with dangerous liquids. This benchmark will ensure you company is provided with a mechanism to improve and help your organisations in mitigating the risks to pollution of controlled waters with dangerous liquids as oil and chemical spills into controlled waters are illegal and very
expensive in fines, clean up costs, insurance and reputation. The adequacy of the spill prevention and control measures on your site is rated against what measures should be in place bearing in mind the type, storage, handling and use of the liquids on site.
Comments
Emergency cover at refuelling and product loading / discharging points
Drains discharging direct into control waters
DISCLAIMERThe recommendations included within a report are based on the assessors opinions, judgements, observations and interpretation of the information made available to him during his time on site. The assessor is not legally empowered to enforce any of the recommendations or suggestions included in this report. The adoption or rejection of these is done so at the discretion of the client. The Spill Risk Assessor cannot be held responsible for any future liability
Interceptors
Drain protection around site
Comments
Comments
134
Area Surveyed Workshop Paint Store
Current Status
Observations
Informed that this location is used to store a single IBC, small number of drums, small containers of oils, AdBlue and some hazardous liquids. Inspection revealed most are free standing without any secondary containment or spill protection. Our recommendation would be to introduce a 2 x SpillMate dispensers to this area stocked with a range of maintenance and chemical absorbent materials allowing for the quick and effective recovery in the event of a spill. 1 x IBC spill pallet and 2 x 4 drum spill pallets.
At the time paint is stored within a shipping container. The tins are placed on wooden pallets and there was clear evidence of previous spills. This metal container does not provide any form of bund containment and in the event of a major spillage it is highly likely that liquid would escape and contaminate the yard and drain system. We would recomended our economy bunded safety store which would provide containment in the event of a spill.
Product Recommendations
• 2 x FL-‐41-‐105 SpillMate Dispensing Stations• 1 x SK-‐05-‐107 Maintenance Pads 35 x 40cm PK 100• 1 x SK-‐08-‐103 Maintenance Roll 30cm x 43m• 1 x SC-‐09-‐102 Maintenance Sock 1200 x 100mm PK 8• 1 x SK-‐05-‐303 Chemical Pads 35 x 40cm PK 100• 1 x SK-‐08-‐301 Chemical Roll 30cm x 43m • 1 x SC-‐09-‐303 Chemical Socks 1200 x 100mm PK 8 • 1 x FL-‐205-‐211 IBC Spill Pallet • 2 x FL-‐205-‐112 4 Drum Spill Pallet
• 1 x FL-‐202-‐001 Bunded External Store
Area Surveyed Internal Storage Area Goods In/Out
Current Status
Observations
Internal storage area clearly shows signs of previous spillages. Areas is currently serviced by a spill dispenser containing maintenance pads which would not offer adequate protection in the event of a spill. We would therefore recommend the introduction of a 1200Litre drop front spill kit. 205 litre drums and smaller containers are contained on secondary bunding. Currently there is no containment for all the IBC, we would propose that all IBC'S are stored on a spill pallets.
At the time of inspection this area did not have any spill kits. As this is potentially a high risks from an oil spill we would recommend the introduction of oil & fuel emergency spill kits. All kits should be clearly labelled and numbered for identification and shown on the emergency response company site plan together with first responders contact.
Product Recommendations
• 1 x SK-‐141-‐205 Oil & Fuel 1200L Drop Front Wheelie Bin Spill Kit• 1 x FL-‐123-‐010 Emergency Spill Kit Station Signage • 3 x FL-‐205-‐211 IBC Spill Pallet
• 2 x SK-‐142-‐203 Oil & Fuel 240L Wheelie Bin Spill Kits• 2 x FL-‐123-‐010 Emergency Spill Kit Station Signage
BSIF Training
Operator Spill Risk Awareness and TrainingWhilst it is essential to have the right equipment for spill control available, the key to minimising spill risk is to ensure that the workforce are aware of the spill risks and are familiar with correct spill response procedures.
As per our discussion at the day of visit on site about the necessity of training for the workforce with accredited First Responder Spill Control training from a BSIF accredited Spill Training Course. The content course structure is as follow: environmental awareness, legislation and compliance, environmental threats and spillage impact, health and safety implications, spill prevention practices – storage, handling and transportation of liquids, spill response, simulated spill exercise and after spill analysis.
We also offer a Train the Trainer course which gives delegates in large organizations the tools to effectively communicate and deliver the First Responders Spill Training Course to their own teams and colleagues. As well as giving them skills in developing their own teaching methods, we offer a Hotline service to ensure the trainer is never left with unanswered questions.
135
Absorbents - Chemical Compatibility Chart
Fluid Oil Only Maintenance ChemicalAcetaldehyde q qAcetic Acid qAcetone q q qAcetyl Chloride q qAcrylic Acid qAllyl Alcohol q qAminobenzoic Acid qAmmonia (Anhydrous) q q qAmmonium Fluoride q q qAmmonium Hydroxide q q qAmyl Alcohol q qAniline q qAviation Fuel q q qBenzaldehyde q q qBenzene* q q qBenzoic Acid qBenzyl Alcohol q qBoric Acid qBrake Fluid q q qBromine Inorganic* q qButyl Acetate q q qButyl Alcohol q q qButyl Cellosolve q q qCalcium Hydroxide q qCarbolic Acid qCarbon Disulfide q qCarbon Tetrachloride q q qCellosolve Acetate q q qCellosolve Solvent q q qChlorobenzene q qChloroform* q q qChloronapthalene q q qChlorothene q q qChromic Acid (50%) qCitric Acid qCresol q q qCyclohexane q q qDibutyl Phthalate q q qDiethylamine q q qDiethyl Ether q q qDimethyl Formamide q q qDimethyl Sulfoxide q q qDioctyl Phthalate q qEther q q qEthyl Acetate q q qEthyl Alcohol q q qEthyl Benzene q q qEthyl Chloride* q q qEthyl Ether q q qEthyl Propionate q q qEthylene Dichloride q q qEthylene Glycol q qFormaldehyde q qFreon q q qFuel Oil q q qFurfural q q qGasoline q q qGearbox Oil q q qGlycerol q qHexane q q qHydrazine q qHydrochloric Acid q
Fluid Oil Only Maintenance ChemicalHydrofluoric Acid qHydroquinone q q qHydrogen Cyanide q q qHydrogen Peroxide q qIsoamyl Acetate q q qIsobutyl Alcohol q q qIsooctane q q qIsopropyl Acetate q q qIsopropyl Alcohol q q qKerosene* q q qKetones q q qLinoleic Acid qLinseed Oil q q qLubricating Oil q q qMethylamine q q qMethyl Alcohol q q qMethyl Cellusolve q q qMethylene Bromide q q qMethyl Chloride q q qMethyl Ether q q qMethyl Ethyl Ketone q q qMethyl Isobutyl Ketone q q qMethyl Methacrylate q q qMineral Oil q q qMineral Spirits q q qMonoethanolamine q q qMorpholine q q qMotor Oil q q qNaptha q q qNapthalene q q qNitric Acid* qNitromethane q q qOctane q q qParaffin q q qPerchloroethylene* q q qPhenol q qPhosphoric Acid qPotassium Hydroxide q qPropanol q qPropionic Acid qPropyl Alcohol q q qPropylene Glycol q q qResorcinol q qSilicone Oil q q qSilver Nitrate q qSodium Bicarbonate q qSodium Chloride q qSodium Hydroxide q qSodium Hypochlorite q qSodium Nitrate q qStyrene q q qSulfuric Acid* qToluene* q q qTransformer Oil q q qTrichlorethylene* q q qTriethylene Glycol q q qTurpentine* q q qXylene* q q q
* These fluids will react with polypropylene causing it to degrade.
136
Polyethylene Products Compatibility Chart
137
ACIDS KEY
Acetic Acid 100% NAcetic Acid 50% YBenzoic Acid YBoric Acid Conc YBoric Acid Dilute YButyric Acid YChromic Acid 50% SCitric Acid YHydrobromic Acid 50% YHydrochloric Acid YHydrofluoric Acid YMaleic Acid 1% YNitric Acid <50% YOleic Acid All Conc YOxalic Acid All Conc YPerchloric Acid 50% YPhosphoric Acid All Conc YPhthalic Acid YSulphuric Acid 98% STannic Acid YTartaric Acid Y
BASES KEY
Acid Salt Y
Ammonia Aqueous Y
Basic Salt Y
Calcium Hydroxide Y
Caustic Soda Sol.10% Y
Neutral Salt Y
Potassium Hydroxide Y
VARIOUS SALTS KEY
Potassium Bicarbonate Y
Potassium Permanganate Y
Sodium Cyanide Y
Sodium Hypochlorite Y
ORGANIC SUBSTANCES, SOLVENTS KEY
Acetone Y
Aniline 100% S
Butyl Alcohol 100% Y
Carbon Disulphide N
Carbon Tetrachloride N
Chlorobezene Y
Chloroform N
Ethyl Acetate 100% S
Ethyl Alcohol Y
Ethyl Ether N
Ethylene Dichloride N
Heptane Y
Methyl Alcohol 100% Y
Methyl Ethyl Ketone S
Nitrobenzene S
Petroleum Y
Phenol 90% N
Toluene S
Trichloroethylene N
GASES KEY
Carbon Dioxide Y
Carbon Monoxide Y
Hydrogen Sulphide Y
KEY:
Y = Product should be suitable for prolonged or repeated contact with these substances under specified conditions.
S = Products may be suitable for short term storage however, some deterioration in properties may occur. It is recommeded that the user should perform qualification tests before and during use of the container.
N = Substances aggressively attack the product or have vapour pressures incompatible with containers.
This information is provided as a guide only. No claims or warranties are expressed or implified as to the absolute accuracy of the data supplied. In all cases it is assumed chemicals in question are at ambient temperatures and pressure and are used in basic state, not in combination or mixtures. Small test sampling by users is always recommended to ensure safe application.
PRODUCT PAGE
A
Absorbent Chemical cushions 104-105
Chemical pads 100-101
Chemical rolls 102-103
Chemical socks 106-107
Chemical spill kits 63-67
Dispensing stations 110-111
Granules 98
Maintenance cushions 104-105
Maintenance pads 100-101, 109
Maintenance recycled pads 109
Maintenance rolls 102-103
Maintenance socks 106-107
Maintenance spill kits 63-65
Oil & fuel booms 115-116
Oil & fuel cushions 104-105
Oil & fuel drum topper 38
Oil & fuel marine fence 117
Oil & fuel marine blanket 117
Oil & fuel pads 100-101, 109
Oil & fuel recycled pads 109
Oil & fuel rolls 102-103
Oil & fuel socks 106-107
Oil & fuel spill kits 63-65, 68
Application guide 6-9
Audit covers 75
B
Bags
Black PVC waste 74
Yellow PVC hazardous waste 74
Barrier tape 74
PRODUCT PAGE
Bin
Accessories 93
Art 93
Drop front 92
Grit/salt 90
Wheelie bin 91
Store 93
Biosecurity mats 87-88
Booms
Inflatable 118
Oil absorbent 115-116
PVC fence 118
Reel 118
Boot wash system 56
Bund/Berm
Collapsible wall 33
Containment wall 36
Foam wall 30-32
Gorilla 35
Plant nappy 28
Pop-Up 29
Portable 30-31
Rapid rise 34
Spillmate 29
Wall 36
C
Cabinets
Chemical 44-46
Flammable/hazardous liquid 45-46
Poly 44
138
Index
PRODUCT PAGE
Ceiling leak diverters 120
Chemical Chemical cushions 104-105
Chemical pads 100-101
Chemical rolls 102-103
Chemical socks 106-107
Chemical spill kits 63-67
Chemical spill neutralisation 112-113
Chemical spill neutralisation stations 113
Compatibility chart Absorbents/chemical 136
Containment/chemical 137
Concrete vehicle washout system 57
Conical drain plugs 86
Construction
Boot wash system 56
Concrete vehicle washout system 57
Drip tray 37
Vehicle wash system 56
Containment Bunds/Berms 29-36
Cabinets 44-46
Drum spill pallets 15-23
IBC spill pallets 24-27
Overpack drums 22-23
Plant nappies 28
Polyethylene storage cabinets 44
Portable containment tanks 50-53
Safe connect 37
PRODUCT PAGE
Spill pallet drum 18-23
Spill pallet IBC 24-27
Spill trays 14
Store 46-49
Tanks 50-55
Work floors 16-17
Cushions absorbent 102-103
D
Degreasing wipes 78
Delta head oil skimmer 119
Dewatering bags 114
Disinfectant DEFRA Approved 88
Disinfectant mats 87-88
Dispensing stations 110-111
Disposal bags 74
Dolly 20, 38, 40, 42
Drain covers & protection
Automatic shut off 80-81
Bag 84-85
Barrier 86
Clay drain mats 84
Conical plugs 86
Drain gully socks 86
Draintector 80-81
Magnetic drain cover 84
Neorug drain cover 84
Plug rug drain covers 84
Polyurethane drain covers 85
Transparent drain covers 85
Witches hat 79
139
PRODUCT PAGE
Drum
Bunded safety store 47-49
Cart 38
Dispensing bunds 41
Dolly 40
Funnel 39
Lid 39
Overpacks 22-23
Poly dolly 40
Racking & dispensing bund 41
Repair putty 76
Spill pallets 18-21
Stores 47-49
Topper absorbent pads 38
Topper poly lid 39
Trays 15
Trolley 38
Wash down tray 39
Drip trays 14
Drum trays 15
E
Eco store 47
Emergency spill kits
ADR 68
Boat 70-71
Body fluid 66
Chemical 63-67
Fork lift truck 69
Hazardous materials 66-67
Laboratory 67
Maintenance 63-65
Marine 70-71
PRODUCT PAGE
Motor Sports Association 69
SOPEP 71
Tanker 68
Oil & fuel 63-65, 68
Vehicle 68-69
F
Fire extinguisher store 46
Flammable liquid storage 45-47
Flood protection
Hydrosack 123
Hydrosnake 123
Plumbmat 122
Plumbpad 122
Roof drip diverter 120
Water Guard 121
Floor rolls 87
Folding pallet box 90
Fuel cans 43
Fuel tanks 54-55
Fuel tank water soakers 53
G
Gas
Cage 42
Cylinder dolly 42
Cylinder stand 42
Gloves
Nitrile heavy duty 75
Nitrile powder free 75
140
Index
PRODUCT PAGE
Granules 98
Grit/salt bin 90
Gully sock 86
HHazard hut 48
Hydrosack 123
Hydrosnake 123
I
IBC spill pallet Frame and cover 26
Funnel and lid 25
Hardcover 27
Spill pallets 24-27
Tarpaulin 26
Interceptor alarms 82-83
JJob hut 48
LLaboratory spill kits 66-67
Laboratory spill tray 14
M
Maintenance
Absorbent cushions 104-105
Absorbent pads 100-101, 109
Absorbent recycled pads 109
Absorbent rolls 102-103
Absorbent socks 106-107
Absorbent spill kits 63-65
PRODUCT PAGE
Marine & inland water defence
Inflatable fence booms 118
Oil & fuel blanket 117
Oil & fuel booms 115-116
Oil & fuel fence 117
Oil & fuel skirted booms 116
Oil skimmer 119
PVC fence booms 118
Weir skimmer 119
Marine SOPEP spill kits 71
Mats
Agricultural 88
Biomats 87-88
Disinfectant 87-88
Floor 87, 103
Railway track 89
Sticky back 87, 103
TAKmats 87
Traffic 88
Vehicle disinfectant 88
Metal spill trays 14
Mini foam wall bunds 30
NNon spark safety shovel 74
O
Oil & Fuel Oil & fuel blanket 117
Oil & fuel booms 115-116
Oil & fuel cushions 104-105
Oil & fuel drum topper 38
141
PRODUCT PAGE
Oil & fuel fence 117
Oil & fuel pads 100-101, 109
Oil & fuel recycled pads 109
Oil & fuel rolls 102-103
Oil & fuel socks 106-107
Oil & fuel spill kits 63-65
Oil skimmer 119
Oil tanks 54-55
Oil waste cans 43
Overpack drums 22-23
P
Pallet box 90
Pipe bandage 77
Pipe socks 114
Plant nappies 28
Plastic epoxy repair 76
Plumbmat 122
Plumbpad 122
Pollution control centre 62
Poly dolly 40
Poly spill trays 14
Poly storage cabinets 44
Pop-Up pools 29
Portable bunds 29-34
Portable tanks 50-53
Putty 76
R
Railway track mats 89
Ramp
Spill pallet 19
Work floor 16-17
PRODUCT PAGE
Repair Pipe bandage 77
Plastic epoxy 76
Plug N Dyke putty 76
Strap it leak stopper 77
Roof drip diverters 120
Rubber gloves 75
S
Safe connect 37
Safety fuel cans & containers 43
Safety shovel 74
Safety signs 72-73
Salvage drums 22-23
Separator alarm 82-83
Shovel 74
Signage 72-73
Site survey assessment 133-135
Solvent wipes 78
Socks
Absorbent 106-107
Pipe 114
Spill kits
ADR 68
Boat 70-71
Body fluid 66
Chemical 63-67
Drop front bin 65
Fork lift truck 69
Hazardous materials 66-67
Laboratory 67
Maintenance 63-65
142
Index
PRODUCT PAGE
Marine 70-71
Motor Sports Association 69
SOPEP 71
Tanker 68
Oil & fuel 63-65, 68
Vehicle 68-69
Wheelie bin 64
Spill kit accessories
Audit covers 75
Barrier tape 74
Gloves 75
Repair products 76-77
Shovel 74
Signage 72-73
Tamper proof tape 75
Waste bags & ties 74
Spill pallet Covered 19-21
Drum 18-19
Hardcover 20-21
IBC 24-25
Ramp 19
Stackable 18, 24
Tarpaulin cover 19, 26
Spill tray
Construction 37
Laboratory 14
Metal 14
Poly 14
Spill training 125-131
Sticky floor mat 87, 103
PRODUCT PAGE
Storage
Cabinets 44-46
Dispensing stations 110-111
Drum 20-21, 47-49
Eco bunded 47
Fire extinguisher 46
Flammable/hazardous liquid 43-47
Hazard hut 48
IBC 24-27,49
Job hut 48
Pollution control centre 62
Utility 46
Wheelie bin 93
TTAKmats 87
TAKrag wipes 78
Tape Barrier 74
Pipe repair 77
Strap it leak stopper 77
Tamper proof 75
Tanks
Fuel 54-55
Oil 54-55
Portable containment 50-53
Waste oil 54-55
Water soaker 53
Training & education 125-131
143
Index
PRODUCT PAGE
Trays Drip 14
Drum 15
Metal 14
Poly 14
Wash down 39
Trolley 38
VVacuum cleaner 113, 119
Vehicle wash system 56-57
WWash down tray 39
Waste oil tanks 54-55
Water guard 108, 121
Water soaker 53
Weir skimmer 119
Wet & dry vacuum cleaner 113
Wheelie bin 91
Wheelie bin art 93
Wheelie bin stores 93
Wipes
Degreasing 78
Industrial 78
Solvent 78
TAKrag 78
Witches hat drain protection 79
Work floors 16-17
NOTES
144