PARTS AND SUPPLIES - Amazon S3

1

PARTS AND SUPPLIESSPRING/SUMMER 2013

Dependable Expertise. Comprehensive Inventory. Local Ownership.

HVAC Parts

Air Conditioning Equipment

Refrigerant and Refrigeration Parts

Tools & Test Instruments

Chemicals and Compounds

Indoor Air Quality

Installation Supplies

Technical References

2

3



HVAC Parts

Air Conditioning Equipment

Refrigerant and Refrigeration Parts

Tools & Test Instruments

Chemicals and Compounds

Indoor Air Quality


Technical References

5

HVAC Parts

SPRING/SUMMER 2013


HVAC PartsBeltsMarsGates V-BeltsSeries 741 - 4L Belts

Features: • Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load

distribution and the absorption of bending stress without cord deterioration. • The Flex-Weave Cover is a patented construction for longer cover life, providing extended

protection to the core of the belt from oil, dirt, and heat. • Gates Curves provide proper cord support and full contact with the sheave-groove for uniform

loading, uniform wear, and increased belt life. • Meets RMA oil and heat resistant standards. Meets RMA static conductivity requirements. • Recommended for lower fractional horsepower applications. • Suitable for all industrial light duty applications, usually using fractional horsepower

(FHP)motors. • Recommended Sheaves: • Light-Duty Sheaves-Bored-to-Size, Light-Duty Sheaves-Variable Pitch • Light-Duty Sheaves-Bushed

Note: Do not use on clutching drives where PoweRated belts are recommended

http://www.marsm-a.com/cgi-bin/lansaweb?procfun+wordpr01+webfunc+ML6

Part Number OutsideCircumference (In)

Top Width (In) Section Cubes CaseQuantity

Weight(lbs)

Description

74157 19 .5 4L 209.0000 100 0.30 1/2" x 19" Light Duty Truflex V-Belt74158 20 .5 4L 209.0000 100 0.10 1/2" x 20" Light Duty Truflex V-Belt74159 21 .5 4L 209.0000 150 0.10 1/2" x 21" Light Duty Truflex V-Belt74160 22 .5 4L 209.0000 100 0.10 1/2" x 22" Light Duty Truflex V-Belt74162 23 .5 4L 209.0000 100 0.15 1/2" x 23" Light Duty Truflex V-Belt74163 24 .5 4L 209.0000 100 0.14 1/2" x 24" Light Duty Truflex V-Belt74164 25 .5 4L 209.0000 100 0.20 1/2" x 25" Light Duty Truflex V-Belt74165 26 .5 4L 209.0000 100 0.10 1/2" x 26" Light Duty Truflex V-Belt74166 27 .5 4L 209.0000 100 0.15 1/2" x 27" Light Duty Truflex V-Belt74167 28 .5 4L 209.0000 100 0.28 1/2" x 28" Light Duty Truflex V-Belt

1 HVAC Parts 1

HVAC PartsBeltsMarsGates V-BeltsSeries 741 - AX Belts

Features: • Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load

Distribution and the absorption of bending stress without cord deterioration. • Meets RMA oil and heat resistant standards. • Meets RMA static conductivity requirements. • Notches molded into the belt during manufacturing make this belt well suited for drives with

smaller diameter sheaves. • Belt Edge is machined for even sheave groove contact resulting in less slip and wear. • Patented EPDM Material construction provides -60°F to +250°F temperature range to resist

Belt cracking.Suitable for all industrial applications, particularly where small or sub-minimal sheave diameters are required.


Part Number OutsideCircumference (In)

Top Width (In) Section Cubes CaseQuantity

Weight(lbs)

Description

74566 28 .5 AX 212.0000 25 0.20 1/2" x 28" Heavy Duty Tri-Power V-Belt74554 34 .5 AX 212.0000 50 0.05 1/2" x 34" Heavy Duty Tri-Power V-Belt74569 37 .5 AX 212.0000 15 0.05 1/2" x 37" Heavy Duty Tri-Power V-Belt74570 38 .5 AX 212.0000 15 0.05 1/2" x 38" Heavy Duty Tri-Power V-Belt74572 40 .5 AX 212.0000 10 0.10 1/2" x 40" Heavy Duty Tri-Power V-Belt74573 42 .5 AX 212.0000 10 0.05 1/2" x 42" Heavy Duty Tri-Power V-Belt74604 46 .5 AX 212.0000 10 0.26 1/2" x 46" Heavy Duty Tri-Power V-Belt74577 48 .5 AX 212.0000 55 0.30 1/2" x 48" Heavy Duty Tri-Power V-Belt74578 50 .5 AX 212.0000 5 0.30 1/2" x 50" Heavy Duty Tri-Power V-Belt

BladesMarsAir Moving ComponentsSeries 400 - 2 Wing Fixed Hub Blades

Features: • MARS 2 and 3 wing blades are designed for lower static pressure applications • They will fit OEM’s such as Carrier, Rheem Rudd, GE, Trane, Singer-climate control, York and

others • Available with 1/2” assembled hub


Part Number BladeDiameter

PitchDegree

Rotation Cubes Weight(lbs)

Description

40301 14 36 CCW 199.0000 1.61 2 Wing Fixed Hub Blade, CCW, 36° Pitch Angle40305 18 24 CW 199.0000 1.58 2 Wing Fixed Hub Blade,CW, 24° Pitch Angle40308 18 29" CCW 199.0000 2.37 2 Wing Fixed Hub Blade,CCW, 33° Pitch Angle40314 20 29 CW 199.0000 1.75 2 Wing Fixed Hub Blade, CCW, 29° Pitch Angle40315 20 29 CCW 199.0000 2.45 2 Wing Fixed Hub Blade, CCW, 29° Pitch Angle

2 HVAC Parts 2

HVAC PartsBladesMarsAir Moving ComponentsSeries 400 - 3 Wing Adapter Heavy Duty Condenser Fan Blades

Features: • AirMARS 3 wing adapter, heavy duty condenser fan blades are designed for rigorous R/HVAC low

pressure applications,they will accommodate universal hex/round adapter hubs. • AirMARS adapter fan blades are durable, efficient & quiet • They are manufactured using high strength aluminum alloy for the blades & sturdy steel for the blade spiders • Blade depths and pitches specified for airMARS adapter fan blades allow for the replacement of a broad

range of commonly used fan blades Typical Applications: • Air Cooled Condensers, Power Roof Ventilators, Residential Air Conditioners, Unit Heaters • Heat Pumps, Fan Coil Units, Roof Top Air Conditioners


BladePart Number Diameter Depth Max RPM Rotation Description40027 10 2.19 1725 RPM CW 3 Wing Adapter Heavy Duty Condenser Fan Blade, CW, 2.19 Blade Depth40061 12 1.56 1725 RPM CW 3 Wing Adapter Heavy Duty Condenser Fan Blade,CW, 1.56 Blade Depth40029 12 1.88 1725 RPM CW 3 Wing Adapter Heavy Duty Condenser Fan Blade, CW, 1.88 Blade Depth40030 12 1.88 1725 RPM CCW 3 Wing Adapter Heavy Duty Condenser Fan Blade, CCW, 1.88 Blade Depth40031 12 2.19 1725 RPM CW 3 Wing Adapter Heavy Duty Condenser Fan Blade, CW, 2.19 Blade Depth40033 14 2.67 1725 RPM CW 3 Wing Adapter Heavy Duty Condenser Fan Blade, CW, 2.67 Blade Depth40034 14 2.67 1725 RPM CCW 3 Wing Adapter Heavy Duty Condenser Fan Blade, CCW, 2.67 Blade Depth40035 14 3.06 1725 RPM CW 3 Wing Adapter Heavy Duty Condenser Fan Blade, CW, 3.06 Blade Depth40036 14 3.06 1725 RPM CCW 3 Wing Adapter Heavy Duty Condenser Fan Blade, CCW, 3.06 Blade Depth40063 16 2.56 1725 RPM CW 3 Wing Adapter Heavy Duty Condenser Fan Blade, CW, 2.56 Blade Depth

Static Pressure 10” Static Pressure 30” Mars No. RPM CFM BHP RPM CFM BHP

40027 825 1075 1725

104 241 572

0.006 0.01 0.03

825 1075 1725

N.A. N.A. 336

N.A. N.A. 0.05

40061 825 1075 1725

121 295 625

0.008 0.01 0.04

825 1075 1725

N.A. N.A. 429

N.A. N.A. 0.05

40029 40030

825 1075 1725

209 385 769

0.01 0.02 0.05

825 1075 1725

N.A. N.A. 580

N.A. N.A. 0.07

40031 825 1075 1725

289 468 914

0.01 0.02 0.07

825 1075 1725

N.A. N.A. 714

N.A. N.A. 0.09

Static Pressure .10” Static Pressure .30” Mars No. RPM CFM BHP RPM CFM BHP

40033 40034

825 1075 1725

568 892 1573

0.02 0.04 0.16

825 1075 1725

N.A. N.A. 1387

N.A. N.A. 0.17

40035 40036

825 1075 1725

664 1006 1757

0.03 0.05 0.21

825 1075 1725

N.A. 531 1568

N.A. 0.08 0.23

40063 825 1075 1725

610 1017 1811

0.02 0.05 0.17

825 1075 1725

N.A. 305 1549

N.A. 0.06 0.20

3 HVAC Parts 3

HVAC PartsBladesMarsAir Moving ComponentsSeries 400 - 4 Wing Adapter Heavy Duty Condenser Fan Blades

Features: • airMARS 4 wing adapter, heavy duty condenser fan blades are designed for rigorous R/HVAC pressure

applications • They will accomodate universal hex/round adapter hubs for unlimited versatility • airMARS adapter fan blades are durable, efficient, and quiet • They are manufactured using high strength aluminum alloy for the blades and sturdy steel for the blade spiders • Blade depths and pitches specified for airMARS adapter fan blades allow for the replacement of a broad range of

commonly used fan blades Typical Applications: • Air Cooled Condensers, Power Roof Ventilators, Residential Air Conditioners • Unit Heaters, Heat Pumps, Fan Coil Units, Roof Top Air Conditioners


BladePart Number Diameter Depth Cubes Max RPM Rotation Weight

(lbs)Description

40076 12 2.28 199.0000 1725 RPM CW 1.50 4 Wing Adapter Heavy Duty Condenser Fan Blade,CW, 2.28 Blade Depth

40077 12 2.28 199.0000 1725 RPM CCW 1.57 4 Wing Adapter Heavy Duty Condenser Fan Blade,CCW, 2.28 Blade Depth


40079 12 2.64 199.0000 1725 RPM CCW 0.90 4 Wing Adapter Heavy Duty Condenser Fan Blade,CW, 2.64 Blade Depth


40081 12 3.16 199.0000 1725 RPM CCW 1.17 4 Wing Adapter Heavy Duty Condenser Fan Blade,CCW, 3.16 Blade Depth


40127 14 1.91 N/A 1725 RPM CCW N/A 4 Wing Adapter Heavy Duty Condenser Fan Blade,CCW, 1.91 Blade Depth


40142 24 2.63 N/A 1140 RPM CCW N/A 4 Wing Adapter Heavy Duty Condenser Fan Blade,CCW, 2.63 Blade Depth

Static Pressure .10” Static Pressure .30”Mars No. RPM CFM BHP RPM CFM BHP

40076 40077

825 1075 1625

260 450 890

0.01 0.03 0.08

825 1075 1625

N.A. 140. 480

N.A. 0.04 0.11

40078 40079

825 1075 1625

300 570 1010

0.01 0.03 0.07

825 1075 1625

N.A. N.A. 790

N.A. N.A. 0.09

40080 40081

825 1075 1625

410 690 1210

0.02 0.03 0.12

825 1075 1625

N.A. 380. 960

N.A. 0.06 0.12

Static Pressure .10” Static Pressure .30”Mars No. RPM CFM BHP RPM CFM BHP

40126 40127

825 1075 1725

435 698 1237

0.02 0.03 0.09

825 1075 1725

N.A. N.A. N.A.

N.A. N.A. N.A.

40128 825 1075 1625

518 809 1339

0.02 0.03 0.13

825 1075 1625

N.A. 373 1184

N.A. 0.05 0.14

40142 825 1075 1140

3014 3990 4268

0.09 0.14 0.20

825 1075 1140

2269 3650 4005

0.16 0.20 0.25

4 HVAC Parts 4

HVAC PartsBladesMarsAir Moving ComponentsSeries 400 - Direct Drive Furnace Blower Wheels

Features: • 44 separate quality checks ensure the production process for airMARS belt drive blower wheels. • Rigorous quality standards, high quality raw material and experienced manufacturing all work together to make

airMARS blower wheels. • airMARS Direct Drive Blower Wheels are designed to work as “drop in” replacements for all major HVAC OEM

equipment.


Part Number Diameter Rotation Center Disc Width (In) Cubes Weight(lbs)

Description

41304 9.50 CCW Concave 7.12 199.0000 5.30 9-7 Direct Drive Furnace Blower Wheel, CCW, Concave41320 10.62 CW Concave 6.06 199.0000 5.65 10-6 Direct Drive Furnace Blower Wheel, CW, Concave41325 10.62 CW Concave 8.06 199.0000 6.80 10-8 Direct Drive Furnace Blower Wheel, CCW, Concave41334 10.62 CCW Convex 10.68 199.0000 9.05 10-10 Direct Drive Furnace Blower Wheel, CCW, Convex41348 11.93 CCW Convex 9.50 199.0000 9.50 11-9 Direct Drive Furnace Blower Wheel, CCW, Convex41353 12.87 CW Concave 9.50 199.0000 11.70 12-9 Direct Drive Furnace Blower Wheel, CW, Concave

Static Pressure .1” Static Pressure .3” Mars No. RPM CFM BHP CFM BHP

41304 1000 1250

1600 1950

0.50 1.01

1400 1850

.42

.89

41320 1000 1200

1680 2010

.36

.62 1550 1910

.31

.59

41325 1000 1200

2300 2800

.83 1.49

2100 2620

.71 1.34

41334 1000 1150

2700 3100

1.07 1.64

2520 2990

.95 1.51

41348 1000 1150

2880 3300

1.25 1.92

2660 3280

1.08 1.78

41353 1000 1150

3800 4400

1.96 2.94

3620 4300

1.79 2.78

Series 400 - Universal Hex HubsFeatures: • Universal Hex Hubs are designed to provide a firm mechanical fit with hex or round bore adapter fan blades. • These hubs are machined steel, designed with tri-point mount for secure spider/hub connections. • Universal Hex Hubs include 2 set screws, for shaft fastening, offset at 90 degrees.


Part Number Bore Size Cubes Selling U/M Per Pack Weight (lbs) Description40002 1/4” 199.0000 EA 1 0.40 1/4" Universal Hex Hub40003 5/16” 199.0000 EA 1 0.40 5/16" Universal Hex Hub40004 3/8” 199.0000 EA 1 0.35 3/8" Universal Hex Hub40005 1/2” 199.0000 EA 1 0.38 1/2" Universal Hex Hub40006 5/8” 199.0000 EA 1 0.35 5/8" Universal Hex Hub40007 3/4” 199.0000 EA 1 0.30 3/4" Universal Hex Hub

5 HVAC Parts 5

HVAC PartsBlower BoardsHoneywellIntegrated - Electronic Fan TimerUniversal Electronic Fan Timer

Universal electronic fan timers replaces multiple field installed EFT manufactured by Honeywell. Includes instructions and special wire harnesses for easy replacement. Specifications: • Application: Integrates control of combustion blower and circulating fan operations for a gas warm air

appliance • Tradeline Value: Universal Tradeline • Replaces: all ST9101's, all ST9120's, all ST9141's, and all ST9160's

http://www.forwardthinking.honeywell.com

Time DelaysPart Number Ambient Temperature

Range °C(°F)ElectricalRatings

Hz Cool OFF Cool On Description

ST9120U1011 -40°C to +79°C(-40 °F to+175 °F)

18 to 30 Vac 50 Hz, 60 Hz adj. 30, 60 sec(set at 30 sec)

adj. 4, 30 sec(set at 4 sec)

Universal Electronic Fan Timer withAdjustable Heat

Integrated - Furnace ControlsUniversal Hot Surface Ignition Furnace Control

Features: • Main burner ignition using a 120V hot surface igniter. Flame rectification circuit to monitor flame presence. • Monitoring of system pressure switch, high temperature limit, and rollout functions. • Appliance operation/safety requirements controlled via microprocessor. • Control of a standard induction-type circulating fan motor (based on appliance requirements), in response

to a conventional low voltage or EnviraCOM thermostat. • LED system status, performance and diagnostic indication. • Wire harnesses provided for simple replacement of most IFCs and integration with most heating and

cooling appliances. Twinning capability ,EnviraCOM communication capability to enable local and/or remote system status, diagnostics, troubleshooting, and HVAC system control.

Application • Universal single stage heating & cooling


VoltagePart Number Hz Line Low DescriptionS9200U100 60 120Vac (97-132 Vac) 24V (18-30Vac) Universal Hot Surface Ignition Integrated Furnace Control, Line

Voltage120Vac (97-132 Vac), Low Voltage 24V (18-30Vac)

6 HVAC Parts 6

HVAC PartsBlower BoardsICMFan Blower ControlsDirect OEM Replacement - Dual On/Off Delay Timer, Model - ICM270

Features: • Dual function fan delay timer ICM270 • Controls the circulating fan in a heat pump, A/C and forced air systems • OFF delay purges ducts of residual air • ON delay allows air to reach the proper comfort level prior to energizing the fan

http://www.icmcontrols.com

VoltagePart Number Input Output Height (In) Length

(In)Width

(In)Description

ICM270 18-30 VAC Heat/Cool Speed 1.25 4.5 5.25 Fan Blower Control - Replacement for OEM ModelsIncluding Rheem 47-22827-x Series Control Boards

Direct OEM Replacement - Dual On/Off Delay Timer, Model - ICM271Features: • Reliable solid state fan blower control ICM271 • Specifically designed to replace popular gas furnace centers • Pin selectable blower delays • High power, relay output • Dual function fan delay timer • Controls the circulating fan in heat pump, A/C and forced air systems • OFF delay purges ducts for residual air • ON delay allows air to reach the proper comfort level prior to energizing the fan


Part Number Input Voltage Height (In) Length (In) Width (In) DescriptionICM271 18-30 VAC 1 5.25 5 Fan Blower Control - Replacement for OEM Models Including

Carrier CES0110017/18 and HH84AA-x Series Control Boards

Direct OEM Replacement - Dual On/Off Delay Timer, Model - ICM272Features: • Cooling control module with fan delay • Integral low voltage terminal board with field thermostat wiring • Electronic air cleaner output • High power, relay output • DC output for fan relays and 1st stage of electric heater control • Interlock circuitry prevents 2nd and 3rd stage electric heat energization without proper fan operation


Part Number Input Voltage Height (In) Length(In)

Width(In)

Description

ICM272 18-30 VAC 1.625 3.75 8 Fan Blower Control - Replacement for OEM Models IncludingCarrier HK61GA001/003 Control Boards

7 HVAC Parts 7


Features: • Solid state output • Silent operation, ""no clicking"" • Controls the circulating fan in heat pump A/C and forced air systems • OFF delay purges ducts of residual air


VoltagePart Number Input Output Weight (lbs) DescriptionICM273 18-30 VAC 2 amps @ 240 VAC 0.15 Fan Blower Control - Replacement for EMI 240000-969 Control

Boards

Direct OEM Replacement - Dual On/Off Delay Timer, Model - ICM274Features: • Microprocessor-based fan blower control • Built in humidity relay • Manually adjustable post-purge off delay from 60-240 seconds • Electronic air cleaner output


Part Number Input Voltage Height (In) Length (In) Width (In) DescriptionICM274 18-30 VAC 1.5 3 5.5 Fan Blower Control - Replacement for EMI 240-1764 Control Boards

Direct OEM Replacement - Dual On/Off Delay Timer, Model - ICM275Features: • Microprocessor-based fan blower control ICM275 • Heavy-duty heat relay • Purges ducts of residual air • Integral short cycle protection


Part Number Input Voltage Height (In) Length (In) Width (In) DescriptionICM275 18-30 VAC 0.875 5.5 5.5 Fan Blower Control - Replacement for OEM Models Including Carrier

CES0110019 and HH84AA-x Series Control Boards

8 HVAC Parts 8


Features: • Microprocessor-based fan blower control ICM276 • Inducer fan outputs • Controls the circulation fan in gas/heat and A/C systems • OFF delay purges ducts of residual air


Part Number Input Voltage Height (In) Length (In) Width (In) DescriptionICM276 18-30 VAC 1.75 4.5 6 Fan Blower Control - Replacement for OEM Models Including Carrier

HK51GA003 and Rheem 47-23619-x Series Control Boards

Dual Function Fan Delay Timer, Model - ICM251Features: • Drives fan directly • High power, relay output • Dual function fan delay timer • Controls the circulating fan in heat pump, A/C and forced air systems • Off delay controls fan relay to purge ducts of residual air at the end of the heating/cooling cycle


Part Number Input Voltage Height (In) Length (In) Width (In) DescriptionICM251 18-30 VAC 1.25 2 3 Fan Blower Control - Dual On/Off Delay Timer (Adjustable Time

Delay)

Dual Function Fan Delay Timer, Model - ICM253Features: • UL 873 recognition for compressor applications • Post-purge fan delay timer • OFF delay purges ducts of residual air at the end of the heating/cooling cycle • Interrogation delay eliminates nuisance trips due to thermostat bounce/tampering


Part Number Input Voltage Height (In) Length (In) Width (In) DescriptionICM253 18-30 VAC 1.25 2 3 Post-Purge Fan Delay Timer with Adjustable 12-390-Second Time

Delay

9 HVAC Parts 9

HVAC PartsBlower BoardsICMFan Blower ControlsDual Function Fan Delay Timer, Model - ICM254

Features: • Dual function fan delay timer • Controls circulating fan in heat pump, A/C and forced air systems • OFF delay controls fan relay to purge ducts of residual air at the end of the heating/cooling cycle • ON delay allows air to reach the proper comfort level prior to energizing the fan


Part Number Input Voltage Height (In) Length (In) Width (In) DescriptionICM254 18-30 VAC 1.25 2 3 Fan Blower Control - Dual On/Off Delay Timer (Adjustable Time

Delay)

Dual Function Fan Delay Timer, Model - ICM255Features: • Low cost open board design • High power, relay output • Dual function fan delay timer • Controls the circulating fan in heat pump, A/C and forced air systems • OFF delay purges ducts of residual air • ON delay allows air to reach the proper comfort level prior to energizing the fan


Part Number Input Voltage Length (In) Width (In) DescriptionICM255 18-30 VAC 2.5 2.5 Fan Blower Control - Dual On/Off Delay Timer (Fixed Time Delay)

White RodgersIntegrated - Furnace ControlsSilicon Carbide Furnace Control

Controls Gas Valve, Ignitor, Two Speed Blower Motor, Inducer, Humidifier (Both 120v & 24v Input), and Air Cleaner. Replaces OEM Goodman, UTEC and TI Models Features: • Includes flash code diagnostics. Twinning, Includes mounting hole template • Fused to protect low voltage system transformers, Adjustable blower relay, 90+ furnace option

Cool Delay Heat Delay Part Number Off Sec On Sec Off Sec On Operating Temperature °C(°F) Description50T35-743 60 5 90 / 120 / 150 30 -40°C to 80°C(-40°F to 176°F) Silicon Carbide Integrated Furnace Control

10 HVAC Parts 10

HVAC PartsBlower BoardsWhite RodgersIntegrated - Furnace ControlsUniversal Single Stage HSI Furnace Control Kit

Features: • 3 Fan Speeds – Cool, Low Heat & High Heat Speeds (Terminal Connections) • Color-Coded (Labeled) Thermostat Connection – For Quick Helpful Selection • System Diagnostics, with Fault Recall (Stored), Cover Label – Displays Diagnostic Table • Red LED Light – Used for Diagnostic Flash Codes, • Low Voltage – Fuse Protection – 3A Replaceable Automotive Type • Humidifier & Electronic Air Cleaner Connections (Optional)

Part Number Dimension Hot SurfaceIgnition

Operating Temperature°C(°F)

Description

50M56U-843 7" H x 5.25" W x 1.25" D 120 VAC -40°C to 80°C(-40°F to176°F)

Universal Single Stage HSI Integrated FurnaceControl Kit

Specifications: Input Voltage 25 VAC 50 / 60 Hz Maximum Input Current @ 25 VAC 0.45 amp Valve Relay 1.5 amp @ 25 VAC 50 / 60 Hz 0.6 pf Ignitor Relay 6.0 amp @ 120 VAC 50 / 60 Hz (resistive) Inducer Relay 2.2 FLA – 3.5 LRA @ 120 VAC Circulator Relay 14.5 FLA -- 25.0 LRA @ 120 VAC Electronic Air Cleaner and Humidifier 1 A @ 120 VAC Mounting Surface mount multipoise Flame Establishing Time 0.8 sec Max @ 60 Hz Flame Failure Response Time 2.0 sec Max @ 60 Hz Main Valve Relay 1.5A @ 25 VAC 60 Hz Minimum current to insure flame detection 1 µa DC* Maximum current for non-detection 0.1 µa DC* Maximum allowable leakage resistance 100 M ohms Gases Approved Natural, Manufactured, Mixed, Liquefied Petroleum, and LP

Gas-Air Mixtures are all approved for use. Note: *Measured with a DC micro ammeter in the flame probe lead

CapacitorsDiversitechHard Start KitsTorque Plus - Hard Start Kits

Features: • Totally solid state, DST-5 is just right for all permanent split capacitor (PSC) compressors from 1/2 to H.P• It can be used on units that operate on 120 through 288 Volts • The DST-6 offers a larger capacitor for severely hard-to-start compressors • The DST-6 can be used on all PSC single phase compressors from 1-1/2 to 10 H.P • A unique combination of relay and safety timer • The capacitor is automatically disconnected in 0.5 seconds if the compressor fails to start

http://www.diversitech.com

Packaging Part Number Width (In) Height (In) Depth (In) Weight DescriptionDST-5 4.25 3 2 0.2 lbs Torque Plus - Hard Start Kit, 300% Torque MultiplierDST-6 5 2.75 8 0.8 lbs Torque Plus - Hard Start Kit, 500% Torque Multiplier

11 HVAC Parts 11

HVAC PartsCapacitorsDiversitechHard Start KitsVariTorque - Hard Start Kits

Features: • The next generation in Compressor Hard Start technology – the VariTorque 690% Boost, Instant

Recycling Hard Start Kit • Adjustable starting torque allows installer to optimize motor starting and minimize problems normally

associated with hard start kits • Adjust to reduce electrical load problems including light flicker on compressor startup • Includes patent pending circuitry which protects capacitor, motor and relay • LED indicator provides easy 2 wire hookup. 1/2 to 10 HP


PackagingPart Number Width (In) Height (In) Depth (In) Weight DescriptionDST-10 5 2.5 8 0.8 lbs VariTorque Hard Start Kit

Motor Run CapacitorsSingle Capacitance - 370VAC, Metal, Oval Can

Part Number Microfarad Can Height Voltage Weight Description37050H 5µF 2.17" 370V 0.2 lbs 370VAC Single Capacitance Motor Run Capacitors, Metal, Oval, 5µF

Single Capacitance - 370VAC, Metal, Round Can

Part Number Microfarad Can Height Voltage Weight Description3GR0545 45+5µF 3.74" 370V 0.69 lbs 370VAC Single Capacitance Motor Run Capacitors, Metal, Round,

45+5µF

12 HVAC Parts 12

HVAC PartsCapacitorsDiversitechMotor Run CapacitorsSingle Capacitance - 440VAC, Metal, Oval Can

Part Number Microfarad Can Height Voltage Weight Description45020H 2µF 1.77" 440V 0.2 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 2µF45030H 3µF 1.77" 440V 0.2 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 3µF45040H 4µF 2.17" 440V 0.2 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 4µF45050H 5µF 2.17" 440V 0.15 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 5µF45060H 6µF 2.95" 440V 0.32 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 6µF45075H 7.5µF 2.17" 440V 0.25 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 7.5µF45100H 10µF 2.56" 440V 0.25 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 10µF45125H 12.5µF 2.95" 440V 0.4 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 12.5µF45150H 15µF 2.95" 440V 0.3 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 15µF45175H 17.5µF 3.94" 440V 0.4 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 17.5µF45200H 20µF 2.56" 440V 0.55 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 20µF45250H 25µF 2.95" 440V 0.6 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 25µF45300H 30µF 3.35" 440V 0.4 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 30µF45350H 35µF 3.35" 440V 0.6 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 35µF45400H 40µF 3.94" 440V 0.705 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 40µF45450H 45µF 3.94" 440V 0.68 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 45µF45500H 50µF 4.53" 440V 0.8 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 50µF45550H 55µF 4.53" 440V 0.8 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 55µF45600H 60µF 5.31" 440V 1 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 60µF45700H 70µF 3.75" 440V 1 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 70µF45800H 80µF 3.75" 440V 1.2 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Oval, 80µF

Single Capacitance - 440VAC, Metal, Round Can

Part Number Microfarad Can Height Voltage Weight Description45150R 15µF 2.61" 440V 0.2 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 15µF45175R 17.5µF 2.95" 440V 440V Single Capacitance Motor Run Capacitor, Metal, Round,17.5µF45200R 20µF 3.40" 440V 0.4 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 20µF45250R 25µF 2.95" 440V 0.2 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 25µF45300R 30µF 3.99" 440V 0.41 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 30µF45350R 35µF 3.94" 440V 0.4 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 35µF45400R 40µF 3.94" 440V 0.4 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 40µF45450R 45µF 4.53" 440V 0.4 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 45µF45500R 50µF 4.92" 440V 0.6 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 50µF45550R 55µF 3.99" 440V 0.8 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 55µF45600R 60µF 4.53" 440V 0.65 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 60µF45800R 80µF 4.97" 440V 1 lbs 440V Single Capacitance Motor Run Capacitor, Metal, Round, 80µF

13 HVAC Parts 13

HVAC PartsCapacitorsDiversitechMotor Run CapacitorsDual Capacitance - 440VAC, Metal, Oval Can

Part Number Microfarad CanHeight

Voltage Weight(lbs)

Description

4JJ0525 25+5µF 3.35" 440V 0.6 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Oval, 25+5µF4JJ0530 30+5µF 3.94" 440V 0.6 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Oval, 30+5µF4JJ0535 35+5µF 3.94" 440V 0.6 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Oval, 35+5µF4JJ0540 40+5µF 3.94" 440V 0.9 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Oval, 40+5µF4JJ7545 45+7.5µF 4.92" 440V 0.8 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Oval, 45+7.5µF4JJ1055 55+10µF 3.75" 440V 1.2 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Oval, 55+10µF4JJ0560 60+5µF 4.92" 440V 1 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Oval, 60+5µF

Dual Capacitance - 440VAC, Metal, Round Can

Part Number Microfarad CanHeight

Voltage Weight Description

4JR0525 25+5µF 3.54" 440V 0.46 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 25+5µF4JR7525 25+7.5µF 3.99" 440V 0.4 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 25+7.5µF4JR0530 30+5µF 3.54" 440V 0.55 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 30+5µF4JR7530 30+7.5µF 3.88" 440V 1.4 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 30+7.5µF4JR0535 35+5µF 3.74" 440V 0.55 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 35+5µF4JR7535 35+7.5µF 3.54" 440V 0.4 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 35+7.5µF4JR0440 40+4µF 3.40" 440V 0.56 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 40+4µF4JR0540 40+5µF 3.54" 440V 0.62 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 40+5µF4JR7540 40+7.5µF 4.72" 440V 0.8 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 40+7.5µF4JR0545 45+5µF 3.74" 440V 0.66 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 45+5µF4JR7545 45+7.5µF 3.40" 440V 0.6 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 45+7.5µF4JR0550 50+5µF 4.13" 440V 0.6 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 50+5µF4JR7550 50+7.5µF 3.40" 440V 0.8 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 50+7.5µF4JR0555 55+5µF 4.92" 440V 0.8 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 55+5µF4JR1055 55+10µF 4.57" 440V 0.85 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 55+10µF4JR7555 55+7.5µF 3.40" 440V 0.8 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 55+7.5µF4JR0560 60+5µF 4.92" 440V 0.4 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 60+5µF4JR7560 60+7.5µF 5.91" 440V 0.88 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 60+7.5µF4JR1060 60+10µF 3.99" 440V 0.83 lbs 440VAC Dual Capacitance Motor Run Capacitor, Metal, Round, 60+10µF

14 HVAC Parts 14

HVAC PartsCapacitorsDiversitechMultiple Value CapacitorSwitchCap Multiple Value Capacitor

Features: • 1 unit covers most HVAC applications • Capacitance value are selected by built-in switches, no jumpers to get lost or connected improperly • Rugged PC-ABS housing can’t corrode like metal can caps and offers superior insulation resistance • Epoxy encapsulated – superior resistance to moisture and vibration • Built-in hang tabs. Easy mounting with sheet metals screws,Easy set-up, 8 switches select 128 values Application • HVAC applications including air handlers, heat pumps, condensing units, coolers, refrigeration systems, RTUs

and PTACs Advantages: • It is a multi-value capacitor that replaces hundreds of single setting capacitors • It offers excellent reliability in an epoxy-filled motor-run capacitor • It Can be easily configured to any setting using the adjustable rocker switches on the bottom • It simplifies the way you work by eliminating the need for almost all of the typical motor-run capacitor inventory • It’s a must have for any technician


OperatingPart Number Temperature Range Voltage Frequency Weight

(lbs)Description

SCAP60D -40°C to 70°C 450 VAC RMS continuous 50 / 60 Hz 3.0 SwitchCap Dual Multi Value CapacitorTechnical Data Sheet: Ratings

Capacitance Range FAN 3.0 to 10.5 MFD 450 VAC Capacitance Range HERM 15 to 60 MFD 450 VAC Capacitance Range Combined 3.0 to 70.5 MFD 450 VAC Leakage Current 30 microAmps max per selected element Life Expectancy (test spec) 3,000 hours @ 85 °C @ 480 VOLTS RMS

Service Life Objectives (Arrhenius) 10,000 hours @ 65 °C (150 °F), 60,000 hours @ 35 °C (104 °F)

Construction Protectors 2 internal 100,000 AFC fault interrupters UL 248 Terminals/Connections Nickel plated steel, 0.8 mm thick, FAN, HERM, COM – each with four 1/4” quick connects Switches (8) Double-Break 8A 250V X2 per element (500V) UL recognized components Housing Rugged corrosion-proof PC-ABS Safety Approval ETL Recognized component to UL508, 12,500 AFC tested Mounting Hang-Tabs (2ea #8 screw holes on tab) (1ea #8 slot under bottom lip)

15 HVAC Parts 15

HVAC PartsCapacitorsICMMotor Starters3-in-1 Relay, Overload, Start Capacitors

Features: • Electric motor starters for single-phase commercial and domestic capillary refrigeration systems and freezers • Pre-wired for fast installation


Part Number Range Dimensions(H x W x L)

Voltage Weight(lbs)

Description

ICM857 1/12 to 1/5 HP 5.25 x 2.5 x 2 120V 0.35 3-in-1 Relay, Overload, Start Capacitors For 1/12 to 1/5 HPApplications



PTCR Hard Start CapacitorsFeatures: • Positive Temperature Coefficient technology (PTC) • For PSC units with existing run capacitor only • OEM approved, Quick recycling • Self-adjusting to voltage fluctuation • Easy to install, 2 wires, clips, or screws • Boosts starting torque, Most economical Applications: • Low voltage situations,Tight or hard starting compressors • Use on any single phase A/C and refrigeration unit


Part Number Range Dimension Voltage Mfd Weight(lbs)

Description

ICM855 1/2 to 10 HP Range (up to1.5 HP recommended)

5 x 1.75 x2.25

115-288VAC

43-52 0.3 PTCR Hard Start with Positive Coefficient Technology forup to 1.5 HP Applications

ICM856 1/2 to 10 HP Range (2-5HP recommended)

5.75 x 2.375x 2

115-288VAC

88-106 0.55 PTCR Hard Start with Positive Coefficient Technology for2-5 HP Applications

16 HVAC Parts 16

HVAC PartsCapacitorsICMMotor StartersRapidStart Hard Starts - Current Sensing

Features: • Operates from 95-288 VAC • Patented current sensing circuitry • Self-adjusting to voltage fluctuation • Easy to install, 2 wires, clip, or screw mounted • For scroll or reciprocating compressors • Solid-state circuitry • Boost starting torque • Disengages upon start • Intrinsically safe, fuse protected (fuse not user replaceable) • UL recognized


Part Number Range Dimension Mfd Weight(lbs)

Description

ICM803 1/12 thru 3 HP 6.8 x 3.35 x 4 88-106 0.65 RapidStart Hard Start with Patented Current Sensing Circuitry,For 1/12 to 3 HP Applications

ICM805 1/12 thru 5 HP 6.8 x 3.35 x 4 145-175 0.8 RapidStart Hard Start with Patented Current Sensing Circuitry,For 1/12 to 5 HP Applications

Rapidstart Hard Starts - Voltage SensingFeatures: • Ensures precise starts • Not affected by ambient temperature • Recycles instantly • For scroll or reciprocating compressors • For 115 or 230 VAC motors • Intrinsically safe, fuse protected • UL recognized


Part Number Range Dimension Mfd Weight(lbs)

Description

ICM860 1/12 to 5 HP 5.9 x 2.27 x1.5

88-106 0.55 Rapid Start Hard Start Features Differential Voltage SensingTechnology, For 1/12 to 5 HP Applications

MarsCapacitance TesterTurboMeter- Dual Screen Capacitance Meter

Part Number Weight (lbs) Description86150 0.55 TurboMeter- Dual Screen Capacitance Meter

17 HVAC Parts 17

HVAC PartsCapacitorsMarsHardstart KitEasy-Start 2 Turbo Hardstart

Part Number Weight (lbs) Description12400 1.65 Easy-Start 2 Turbo Hardstart

Motor Run CapacitorsSeries 120 - Single Section 370 Volt Oval

Features: • MARS offers the widest selections of ratings in the industry • Non-PCB capacitors. • Physical interrupter makes our capacitors safe • Perfect for general replacements—smallest dimensions available • UL and CSA listings available


Part Number Microfarad Voltage Height (In) Depth (In) Width (In) Weight(lbs)

Description

12004 4 370V 1.500 1.31 2.16 0.20 4 MFD x 370V Single Section Motor Run Capacitor, Oval12005 5 370V 1.500 1.31 2.16 0.15 5 MFD x 370V Single Section Motor Run Capacitor, Oval12006 6 370V 1.500 1.31 2.16 0.15 6 MFD x 370V Single Section Motor Run Capacitor, Oval12007 7.5 370V 2.375 1.31 2.16 0.20 7.5 MFD x 370V Single Section Motor Run Capacitor, Oval12008 10 370V 2.625 1.31 2.16 0.30 10 MFD x 370V Single Section Motor Run Capacitor, Oval12009 12.5 370V 3.000 1.31 2.16 0.30 12.5 MFD x 370V Single Section Motor Run Capacitor,

Oval12010 15 370V 3.750 1.31 2.16 0.35 15 MFD x 370V Single Section Motor Run Capacitor, Oval12011 65 370V 4.750 1.91 2.91 0.85 65 MFD x 370V Single Section Motor Run Capacitor, Oval12012 17.5 370V 3.750 1.31 2.16 0.35 17.5 MFD x 370V Single Section Motor Run Capacitor,

Oval12014 20 370V 2.375 1.91 2.91 0.40 20 MFD x 370V Single Section Motor Run Capacitor, Oval12015 25 370V 2.625 1.91 2.91 0.50 25 MFD x 370V Single Section Motor Run Capacitor, Oval12017 30 370V 2.625 1.91 2.91 0.55 30 MFD x 370V Single Section Motor Run Capacitor, Oval12018 35 370V 3.000 1.91 2.91 0.65 35 MFD x 370V Single Section Motor Run Capacitor, Oval12021 40 370V 3.750 1.91 2.91 0.65 40 MFD x 370V Single Section Motor Run Capacitor, Oval12023 45 370V 3.750 1.91 2.91 0.60 45 MFD x 370V Single Section Motor Run Capacitor, Oval12024 55 370V 4.250 1.91 2.91 0.85 55 MFD x 370V Single Section Motor Run Capacitor, Oval12025 50 370V 3.750 1.91 2.91 0.85 50 MFD x 370V Single Section Motor Run Capacitor, Oval12087 60 370V 4.750 1.91 2.91 0.80 60 MFD x 370V Single Section Motor Run Capacitor, Oval12089 70 370V 4.750 1.91 2.91 0.85 70 MFD x 370V Single Section Motor Run Capacitor, Oval12090 80 370V 3.750 1.97 3.66 0.95 80 MFD x 370V Single Section Motor Run Capacitor, Oval

18 HVAC Parts 18

HVAC PartsCapacitorsMarsMotor Run CapacitorsSeries 120 - Single Section 370 Volt Round



Part Number Microfarad Voltage Height (In) Depth (In) Weight(lbs)

Description

12092 2 370V 2.000 1.75 0.27 2 MFD x 370V Single Section Motor Run Capacitor, Round12093 3 370V 2.000 1.75 0.29 3 MFD x 370V Single Section Motor Run Capacitor, Round12094 4 370V 2.000 1.75 0.26 4 MFD x 370V Single Section Motor Run Capacitor, Round12095 5 370V 2.000 1.75 0.25 5 MFD x 370V Single Section Motor Run Capacitor, Round12096 6 370V 2.000 1.75 0.17 6 MFD x 370V Single Section Motor Run Capacitor, Round12097 7.5 370V 2.000 1.75 0.30 7.5 MFD x 370V Single Section Motor Run Capacitor, Round12098 10 370V 2.000 1.75 0.20 10 MFD x 370V Single Section Motor Run Capacitor, Round12099 12.5 370V 2.000 1.75 0.30 12.5 MFD x 370V Single Section Motor Run Capacitor, Round12116 100 370V 4.750 2.50 0.90 100 MFD x 370V Single Section Motor Run Capacitor, Round12128 65 370V 4.750 2.00 0.65 65 MFD x 370V Single Section Motor Run Capacitor, Round12199 80 370V 4.750 2.00 0.45 80 MFD x 370V Single Section Motor Run Capacitor, Round12210 15 370V 2.375 1.75 0.30 15 MFD x 370V Single Section Motor Run Capacitor, Round12211 16 370V 2.375 1.75 0.25 16 MFD x 370V Single Section Motor Run Capacitor, Round12212 17.5 370V 2.375 1.75 0.30 17.5 MFD x 370V Single Section Motor Run Capacitor, Round12214 20 370V 2.625 1.75 0.30 20 MFD x 370V Single Section Motor Run Capacitor, Round12215 25 370V 3.000 1.75 0.25 25 MFD x 370V Single Section Motor Run Capacitor, Round12217 30 370V 3.000 1.75 0.35 30 MFD x 370V Single Section Motor Run Capacitor, Round12218 35 370V 3.750 1.75 0.45 35 MFD x 370V Single Section Motor Run Capacitor, Round12221 40 370V 3.750 1.75 0.40 40 MFD x 370V Single Section Motor Run Capacitor, Round12223 45 370V 3.375 2.00 0.45 45 MFD x 370V Single Section Motor Run Capacitor, Round12225 50 370V 3.750 2.00 0.45 50 MFD x 370V Single Section Motor Run Capacitor, Round12226 55 370V 3.750 2.00 0.50 55 MFD x 370V Single Section Motor Run Capacitor, Round12227 60 370V 4.750 2.00 0.60 60 MFD x 370V Single Section Motor Run Capacitor, Round12229 70 370V 4.750 2.00 0.60 70 MFD x 370V Single Section Motor Run Capacitor, Round

19 HVAC Parts 19

HVAC PartsCapacitorsMarsMotor Run CapacitorsSeries 120 - Single Section 440 Volt Oval



Part Number Microfarad Voltage Height (In) Depth (In)Width (In) Weight(lbs)

Description

12019 2.5 440V 1.500 1.31 2.16 0.20 2.5 MFD x 440V Single Section Motor Run Capacitor, Oval12026 2 440V 1.500 1.31 2.16 0.25 2 MFD x 440V Single Section Motor Run Capacitor, Oval12027 3 440V 2.000 1.31 2.16 0.25 3 MFD x 440V Single Section Motor Run Capacitor, Oval12028 4 440V 2.000 1.31 2.16 0.25 4 MFD x 440V Single Section Motor Run Capacitor, Oval12029 5 440V 2.375 1.31 2.16 0.25 5 MFD x 440V Single Section Motor Run Capacitor, Oval12030 6 440V 2.375 1.31 2.16 0.25 6 MFD x 440V Single Section Motor Run Capacitor, Oval12031 7.5 440V 2.625 1.31 2.16 0.25 7.5 MFD x 440V Single Section Motor Run Capacitor, Oval12032 10 440V 3.750 1.31 2.16 0.30 10 MFD x 440V Single Section Motor Run Capacitor, Oval12033 12.5 440V 3.750 1.31 2.16 0.35 12.5 MFD x 440V Single Section Motor Run Capacitor, Oval12034 15 440V 2.375 1.91 2.91 0.45 15 MFD x 440V Single Section Motor Run Capacitor, Oval12036 17.5 440V 2.375 1.91 2.91 0.50 17.5 MFD x 440V Single Section Motor Run Capacitor, Oval12037 20 440V 2.625 1.91 2.91 0.50 20 MFD x 440V Single Section Motor Run Capacitor, Oval12040 25 440V 3.000 1.91 2.91 0.65 25 MFD x 440V Single Section Motor Run Capacitor, Oval12041 30 440V 3.750 1.91 2.91 0.65 30 MFD x 440V Single Section Motor Run Capacitor, Oval12043 35 440V 3.750 1.91 2.91 0.90 35 MFD x 440V Single Section Motor Run Capacitor, Oval12045 40 440V 4.750 1.91 2.91 0.80 40 MFD x 440V Single Section Motor Run Capacitor, Oval12048 45 440V 4.750 1.91 2.91 0.85 45 MFD x 440V Single Section Motor Run Capacitor, Oval12049 50 440V 4.750 1.91 2.91 0.85 50 MFD x 440V Single Section Motor Run Capacitor, Oval12050 55 440V 4.750 1.91 2.91 0.85 55 MFD x 440V Single Section Motor Run Capacitor, Oval12051 60 440V 3.750 1.97 3.66 1.00 60 MFD x 440V Single Section Motor Run Capacitor, Oval12052 65 440V 3.750 1.97 3.66 0.95 65 MFD x 440V Single Section Motor Run Capacitor, Oval12130 70 440V 3.750 1.97 3.66 1.00 70 MFD x 440V Single Section Motor Run Capacitor, Oval12135 75 440V 3.750 1.97 3.66 0.60 75 MFD x 440V Single Section Motor Run Capacitor, Oval12140 80 440V 4.750 1.97 3.66 1.20 80 MFD x 440V Single Section Motor Run Capacitor, Oval

20 HVAC Parts 20

HVAC PartsCapacitorsMarsMotor Run CapacitorsSeries 120 - Single Section 440 Volt Round



Part Number Microfarad Voltage Height (In) Depth (In) Weight(lbs)

Description

12068 90 440V 4.750 2.50 0.90 90 MFD x 440V Single Section Motor Run Capacitor, Round12102 2 440V 2.000 1.75 0.20 2 MFD x 440V Single Section Motor Run Capacitor, Round12103 3 440V 2.000 1.75 0.30 3 MFD x 440V Single Section Motor Run Capacitor, Round12104 4 440V 2.000 1.75 0.30 4 MFD x 440V Single Section Motor Run Capacitor, Round12105 5 440V 2.000 1.75 0.35 5 MFD x 440V Single Section Motor Run Capacitor, Round12106 6 440V 2.000 1.75 0.18 6 MFD x 440V Single Section Motor Run Capacitor, Round12107 7.5 440V 2.000 1.75 0.25 7.5 MFD x 440V Single Section Motor Run Capacitor, Round12232 10 440V 2.375 1.75 0.20 10 MFD x 440V Single Section Motor Run Capacitor, Round12233 12.5 440V 2.375 1.75 0.25 12.5 MFD x 440V Single Section Motor Run Capacitor, Round12234 15 440V 2.625 1.75 0.30 15 MFD x 440V Single Section Motor Run Capacitor, Round12236 17.5 440V 2.750 1.75 0.30 17.5 MFD x 440V Single Section Motor Run Capacitor, Round12237 20 440V 3.000 1.75 0.30 20 MFD x 440V Single Section Motor Run Capacitor, Round12240 25 440V 3.750 1.75 0.40 25 MFD x 440V Single Section Motor Run Capacitor, Round12241 30 440V 3.375 2.00 0.50 30 MFD x 440V Single Section Motor Run Capacitor, Round12243 35 440V 3.750 2.00 0.50 35 MFD x 440V Single Section Motor Run Capacitor, Round12245 40 440V 3.750 2.00 0.50 40 MFD x 440V Single Section Motor Run Capacitor, Round12248 45 440V 4.750 2.00 0.60 45 MFD x 440V Single Section Motor Run Capacitor, Round12251 50 440V 3.375 2.50 0.80 50 MFD x 440V Single Section Motor Run Capacitor, Round12252 55 440V 3.750 2.50 0.95 55 MFD x 440V Single Section Motor Run Capacitor, Round12254 60 440V 3.750 2.50 0.90 60 MFD x 440V Single Section Motor Run Capacitor, Round12258 70 440V 4.750 2.50 0.90 70 MFD x 440V Single Section Motor Run Capacitor, Round12259 80 440V 4.750 2.50 0.95 80 MFD x 440V Single Section Motor Run Capacitor, Round

21 HVAC Parts 21

HVAC PartsCapacitorsMarsMotor Run CapacitorsSeries 120 - Dual Section 370 Volt Oval

Dual section run capacitors are used primarily to serve two microfarad applications. They can, however,by making various combinations of parallel connections, be used to obtain many other microfarad ratings Features: MARS offers the widest selections of ratings in the industry, Non-PCB capacitors. Physical interrupter makes our capacitors safe, UL and CSA listings available Perfect for general replacements—smallest dimensions available


Part Number Microfarad Voltage Height (In) Width (In) Weight(lbs) Description

12056 15/4 370V 2.625 2.91 0.35 15/4 MFD x 370V Dual Section Motor Run Capacitor, Oval12057 15/5 370V 2.625 2.91 0.55 15/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12058 15/10 370V 3.000 2.91 0.70 15/10 MFD x 370V Dual Section Motor Run Capacitor, Oval12059 17.5/4 370V 2.375 2.91 0.55 17.5/4 MFD x 370V Dual Section Motor Run Capacitor, Oval12060 17.5/5 370V 2.375 2.91 0.30 17.5/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12061 20/3 370V 2.625 2.91 N/A 20/3 MFD x 370V Dual Section Motor Run Capacitor, Oval12062 20/4 370V 2.625 2.91 0.50 20/4 MFD x 370V Dual Section Motor Run Capacitor, Oval12063 20/5 370V 2.625 2.91 0.50 20/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12064 20/10 370V 2.625 2.91 0.50 20/10 MFD x 370V Dual Section Motor Run Capacitor, Oval12065 25/4 370V 2.625 2.91 0.50 25/4 MFD x 370V Dual Section Motor Run Capacitor, Oval12066 25/5 370V 2.625 2.91 0.40 25/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12069 30/5 370V 3.000 2.91 0.60 30/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12071 35/4 370V 3.750 2.91 0.70 35/4 MFD x 370V Dual Section Motor Run Capacitor, Oval12072 35/5 370V 3.750 2.91 0.70 35/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12123 80/7.5 370V 4.750 3.66 1.20 80/7.5 MFD x 370V Dual Section Motor Run Capacitor, Oval12131 25/8 370V 3.000 2.91 0.55 25/8 MFD x 370V Dual Section Motor Run Capacitor, Oval12133 25/15 370V 3.000 2.91 0.55 25/15 MFD x 370V Dual Section Motor Run Capacitor, Oval12134 40/10 370V 3.750 2.91 0.65 40/10 MFD x 370V Dual Section Motor Run Capacitor, Oval12136 45/10 370V 4.750 2.91 0.85 45/10 MFD x 370V Dual Section Motor Run Capacitor, Oval12137 45/15 370V 4.750 2.91 0.80 45/15 MFD x 370V Dual Section Motor Run Capacitor, Oval12138 50/5 370V 4.750 2.91 0.85 50/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12139 60/5 370V 4.750 3.66 1.25 60/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12141 15/3 370V 2.625 2.91 0.60 15/3 MFD x 370V Dual Section Motor Run Capacitor, Oval12142 25/3 370V 2.625 2.91 0.60 25/3 MFD x 370V Dual Section Motor Run Capacitor, Oval12143 25/7.5 370V 2.625 2.91 0.60 25/7.5 MFD x 370V Dual Section Motor Run Capacitor, Oval12144 30/3 370V 3.000 2.91 0.60 30/3 MFD x 370V Dual Section Motor Run Capacitor, Oval12145 30/4 370V 3.000 2.91 0.60 30/4 MFD x 370V Dual Section Motor Run Capacitor, Oval12146 30/7.5 370V 3.000 2.91 0.55 30/7.5 MFD x 370V Dual Section Motor Run Capacitor, Oval12147 30/10 370V 3.375 2.91 0.70 30/10 MFD x 370V Dual Section Motor Run Capacitor, Oval12148 35/3 370V 3.000 2.91 0.55 35/3 MFD x 370V Dual Section Motor Run Capacitor, Oval12149 35/7.5 370V 3.000 2.91 0.60 35/7.5 MFD x 370V Dual Section Motor Run Capacitor, Oval12150 35/10 370V 3.750 2.91 0.70 35/10 MFD x 370V Dual Section Motor Run Capacitor, Oval12151 40/3 370V 3.750 2.91 0.80 40/3 MFD x 370V Dual Section Motor Run Capacitor, Oval12152 40/7.5 370V 3.750 2.91 0.70 40/7.5MFD x 370V Dual Section Motor Run Capacitor, Oval12153 45/7.5 370V 3.750 2.91 0.70 45/7.5MFD x 370V Dual Section Motor Run Capacitor, Oval12154 55/5 370V 4.750 2.91 0.80 55/5MFD x 370V Dual Section Motor Run Capacitor, Oval

22 HVAC Parts 22



12155 55/7.5 370V 4.750 2.91 1.25 55/7.5MFD x 370V Dual Section Motor Run Capacitor, Oval12156 60/7.5 370V 4.750 2.91 0.85 60/7.5MFD x 370V Dual Section Motor Run Capacitor, Oval12157 60/10 370V 4.750 2.91 0.80 60/10 MFD x 370V Dual Section Motor Run Capacitor, Oval12158 40/4 370V 3.750 2.91 0.75 40/4 MFD x 370V Dual Section Motor Run Capacitor, Oval12159 65/5 370V 4.750 3.66 1.25 65/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12163 80/5 370V 4.750 3.66 1.15 80/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12164 20/15 370V 4.750 2.91 0.85 20/15 MFD x 370V Dual Section Motor Run Capacitor, Oval12167 25/10 370V 3.000 2.91 0.55 25/10 MFD x 370V Dual Section Motor Run Capacitor, Oval12171 40/5 370V 3.750 2.91 0.65 40/5 MFD x 370V Dual Section Motor Run Capacitor, Oval12173 45/3 370V 3.750 2.91 0.70 45/3 MFD x 370V Dual Section Motor Run Capacitor, Oval12174 45/5 370V 3.750 2.91 0.65 45/5 MFD x 370V Dual Section Motor Run Capacitor, Oval

Series 120 - Dual Section 370 Volt Round



Part Number Microfarad Voltage Height (In) Depth (In) Weight(lbs) Description

12016 20/7.5 370V 3.125 2.00 0.40 20/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12039 30/15 370V 3.875 2.00 0.50 30/15 MFD x 370V Dual Section Motor Run Capacitor, Round12042 65/5 370V 4.75 2.00 0.55 65/5 MFD x 370V Dual Section Motor Run Capacitor, Round12044 75/5 370V 3.875 2.50 0.80 75/5 MFD x 370V Dual Section Motor Run Capacitor, Round12046 75/7.5 370V 3.875 2.50 0.75 75/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12053 70/5 370V 3.875 2.50 0.75 70/5 MFD x 370V Dual Section Motor Run Capacitor, Round12054 70/7.5 370V 3.875 2.50 0.75 70/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12055 70/10 370V 3.875 2.50 0.80 70/10 MFD x 370V Dual Section Motor Run Capacitor, Round12067 55/10 370V 4.75 2.00 0.65 55/10 MFD x 370V Dual Section Motor Run Capacitor, Round12073 45/3 370V 3.875 2.00 0.55 45/3 MFD x 370V Dual Section Motor Run Capacitor, Round12074 40/3 370V 3.875 2.00 0.50 40/3 MFD x 370V Dual Section Motor Run Capacitor, Round12075 50/3 370V 3.125 2.50 0.70 50/3 MFD x 370 Dual Section Motor Run Capacitor, Round12076 60/3 370V 3.875 2.50 0.75 60/3 MFD x 370V Dual Section Motor Run Capacitor, Round12082 35/3 370V 3.875 2.00 0.55 35/3 MFD x 370V Dual Section Motor Run Capacitor, Round12084 75/10 370V 3.875 2.50 0.75 75/10 MFD x 370V Dual Section Motor Run Capacitor, Round12121 15/3 370V 3.125 2.00 0.45 15/3 MFD x 370V Dual Section Motor Run Capacitor, Round12122 15/4 370V 3.125 2.00 0.20 15/4 MFD x 370V Dual Section Motor Run Capacitor, Round12129 85/5 370V 4.75 2.50 0.95 85/5 MFD x 370V Dual Section Motor Run Capacitor, Round12175 25/4 370V 3.125 2.00 0.30 25/4 MFD x 370V Dual Section Motor Run Capacitor, Round12178 40/5 370V 3.875 2.00 0.55 40/5 MFD x 370V Dual Section Motor Run Capacitor, Round12191 50/5 370V 3.875 2.00 0.55 50/5 MFD x 370V Dual Section Motor Run Capacitor, Round12192 50/7.5 370V 3.125 2.50 0.75 50/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round

23 HVAC Parts 23

HVAC PartsCapacitorsMarsMotor Run CapacitorsSeries 120 - Dual Section 370 Volt Round


12193 55/5 370V 4.75 2.00 0.65 55/5 MFD x 370V Dual Section Motor Run Capacitor, Round12194 55/7.5 370V 4.75 2.00 0.65 55/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12195 60/5 370V 3.875 2.50 0.75 60/5 MFD x 370V Dual Section Motor Run Capacitor, Round12196 60/7.5 370V 4.75 2.00 0.55 60/7.5 MFD 370V Dual Section Motor Run Capacitor, Round12197 80/5 370V 3.875 2.50 0.75 80/5 MFD x 370V Dual Section Motor Run Capacitor, Round12198 80/7.5 370V 3.875 2.50 0.81 80/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12201 80/10 370V 3.875 2.50 0.75 80/10 MFD x 370V Dual Section Motor Run Capacitor, Round12202 80/12.5 370V 4.75 2.50 0.95 80/12.5 MFD x 370V Dual Section Motor Run Capacitor, Round12203 15/5 370V 3.125 2.00 0.45 15/5 MFD x 370V Dual Section Motor Run Capacitor, Round12204 15/10 370V 3.125 2.00 0.35 15/10 MFD x 370V Dual Section Motor Run Capacitor, Round12205 17.5/4 370V 3.125 2.00 0.45 17.5/4 MFD x 370V Dual Section Motor Run Capacitor, Round12206 17.5/5 370V 3.125 2.00 0.35 17.5/5 MFD x 370V Dual Section Motor Run Capacitor, Round12208 20/10 370V 3.125 2.00 0.45 20/10 MFD x 370V Dual Section Motor Run Capacitor, Round12209 20/15 370V 3.125 2.00 0.50 20/15 MFD x 370V Dual Section Motor Run Capacitor, Round12213 25/10 370V 3.125 2.00 0.50 25/10 MFD x 370V Dual Section Motor Run Capacitor, Round12222 85/10 370V 4.75 2.50 0.95 85/10 MFD x 370V Dual Section Motor Run Capacitor, Round12224 30/7.5 370V 3.125 2.00 0.35 30/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12228 30/10 370V 3.125 2.00 0.30 30/10 MFD x 370V Dual Section Motor Run Capacitor, Round12230 85/7.5 370V 4.75 2.50 0.95 85/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12231 35/4 370V 3.125 2.00 0.40 35/4 MFD x 370V Dual Section Motor Run Capacitor, Round12235 35/7.5 370V 3.125 2.00 0.35 35/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12238 35/10 370V 3.875 2.00 0.40 35/10 MFD x 370V Dual Section Motor Run Capacitor, Round12239 50/10 370V 3.875 2.50 0.65 50/10 MFD x 370V Dual Section Motor Run Capacitor, Round12242 25/3 370V 3.125 2.00 0.47 25/3 MFD x 370V Dual Section Motor Run Capacitor, Round12244 30/3 370V 3.125 2.00 0.45 30/3 MFD x 370V Dual Section Motor Run Capacitor, Round12246 40/10 370V 3.875 2.00 0.50 40/10 MFD x 370V Dual Section Motor Run Capacitor, Round12247 45/4 370V 3.875 2.00 0.45 45/4 MFD x 370V Dual Section Motor Run Capacitor, Round12249 45/7.5 370V 3.875 2.00 0.55 45/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12250 45/10 370V 3.875 2.00 0.55 45/10 MFD x 370V Dual Section Motor Run Capacitor, Round12260 20/5 370V 3.125 2.00 0.35 20/5 MFD x 370V Dual Section Motor Run Capacitor, Round12261 25/5 370V 3.125 2.00 0.40 25/5 MFD x 370V Dual Section Motor Run Capacitor, Round12262 25/7.5 370V 3.125 2.00 0.45 25/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12263 30/4 370V 3.125 2.00 0.45 30/4 MFD x 370V Dual Section Motor Run Capacitor, Round12264 30/5 370V 3.125 2.00 0.45 30/5 MFD x 370V Dual Section Motor Run Capacitor, Round12265 60/10 370V 3.125 2.50 0.75 60/10 MFD x 370V Dual Section Motor Run Capacitor, Round12266 35/5 370V 3.875 2.00 0.45 35/5 MFD x 370V Dual Section Motor Run Capacitor, Round12267 40/4 370V 3.875 2.00 0.50 40/4 MFD x 370V Dual Section Motor Run Capacitor, Round12268 40/7.5 370V 3.875 2.00 0.50 40/7.5 MFD x 370V Dual Section Motor Run Capacitor, Round12269 45/5 370V 3.875 2.50 0.75 45/5 MFD x 370V Dual Section Motor Run Capacitor, Round

24 HVAC Parts 24





12013 50/7.5 440V 4.750 2.91 1.20 50/7.5 MFD x 440V Dual Section Motor Run Capacitor, Oval12035 30/10 440V 3.750 2.91 0.70 30/10 MFD x 440V Dual Section Motor Run Capacitor, Oval12038 30/7.5 440V 3.750 2.91 0.70 30/7.5 MFD x 440V Dual Section Motor Run Capacitor, Oval12080 40/3 440V 4.750 2.91 0.80 40/3 MFD x 440V Dual Section Motor Run Capacitor, Oval12083 20/15 440V 3.000 3.66 0.80 20/15 MFD x 440V Dual Section Motor Run Capacitor, Oval12085 35/3 440V 4.750 2.91 0.85 35/3 MFD x 440V Dual Section Motor Run Capacitor, Oval12086 40/5 440V 4.750 2.91 0.85 40/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12101 65/10 440V 4.750 3.66 1.25 65/10 MFD x 440V Dual Section Motor Run Capacitor, Oval12108 50/5 440V 4.750 3.66 1.25 50/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12109 60/5 440V 4.750 3.66 1.20 60/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12110 60/7.5 440V 4.750 3.66 1.20 60/7.5 MFD x 440V Dual Section Motor Run Capacitor, Oval12165 10/5 440V 2.625 2.91 0.55 10/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12177 15/10 440V 3.750 2.91 0.75 15/10 MFD x 440V Dual Section Motor Run Capacitor, Oval12179 35/4 440V 3.750 2.91 0.75 35/4 MFD x 440V Dual Section Motor Run Capacitor, Oval12180 20/5 440V 2.625 2.91 0.40 20/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12181 30/4 440V 3.750 2.91 0.65 30/4 MFD x 440V Dual Section Motor Run Capacitor, Oval12182 25/7.5 440V 3.750 2.91 N/A 25/7.5 MFD x 440V Dual Section Motor Run Capacitor, Oval12183 25/10 440V 3.750 2.91 0.75 25/10 MFD x 440V Dual Section Motor Run Capacitor, Oval12184 25/5 440V 3.000 3.66 0.70 25/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12185 35/5 440V 4.750 2.91 0.90 35/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12186 25/15 440V 3.000 3.66 N/A 25/15 MFD x 440V Dual Section Motor Run Capacitor, Oval12187 30/5 440V 3.750 3.66 1.00 30/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12188 35/7.5 440V 3.750 2.91 0.65 35/7.5 MFD x 440V Dual Section Motor Run Capacitor, Oval12189 40/7.5 440V 4.750 2.91 0.85 40/7.5 MFD x 440V Dual Section Motor Run Capacitor, Oval12190 45/5 440V 4.750 3.66 1.15 45/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12270 15/4 440V 2.625 2.91 0.50 15/4 MFD x 440V Dual Section Motor Run Capacitor, Oval12271 15/5 440V 2.625 2.91 0.60 15/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12272 35/10 440V 4.750 2.91 0.90 35/10 MFD x 440V Dual Section Motor Run Capacitor, Oval12273 40/10 440V 4.750 2.91 0.90 40/10 MFD x 440V Dual Section Motor Run Capacitor, Oval12274 45/7.5 440V 4.750 2.91 0.90 45/7.5 MFD x 440V Dual Section Motor Run Capacitor, Oval12275 55/5 440V 4.750 3.66 1.15 55/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12276 55/10 440V 4.750 3.66 1.15 55/10 MFD x 440V Dual Section Motor Run Capacitor, Oval12297 80/5 440V 5.750 3.66 1.45 80/5 MFD x 440V Dual Section Motor Run Capacitor, Oval12298 80/7.5 440V 5.750 3.66 1.45 80/7.5 MFD x 440V Dual Section Motor Run Capacitor, Oval

25 HVAC Parts 25





12020 85/7.5 440V 4.750 2.50 0.95 85/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12022 85/5 440V 4.750 2.50 0.90 85/5 MFD x 440V Dual Section Motor Run Capacitor, Round12047 75/10 440V 4.750 2.50 0.95 75/10 MFD x 440V Dual Section Motor Run Capacitor, Round12070 35/4 440V 3.875 2.00 0.55 35/4 MFD x 440V Dual Section Motor Run Capacitor, Round12077 35/3 440V 3.875 2.00 0.50 35/3 MFD x 440V Dual Section Motor Run Capacitor, Round12078 40/3 440V 3.125 2.50 0.75 40/3 MFD x 440V Dual Section Motor Run Capacitor, Round12079 45/3 440V 3.875 2.50 0.75 45/3 MFD x 440V Dual Section Motor Run Capacitor, Round12088 40/10 440V 4.750 2.00 0.65 40/10 MFD x 440V Dual Section Motor Run Capacitor, Round12091 35/10 440V 4.750 2.00 0.55 35/10 MFD x 440V Dual Section Motor Run Capacitor, Round12111 10/5 440V 3.125 2.00 0.45 10/5 MFD x 440V Dual Section Motor Run Capacitor, Round12112 20/15 440V 3.875 2.00 0.05 20/15 MFD x 440V Dual Section Motor Run Capacitor, Round12113 25/10 440V 3.625 2.00 0.55 25/10 MFD x 440V Dual Section Motor Run Capacitor, Round12114 25/15 440V 3.875 2.00 0.10 25/15 MFD x 440V Dual Section Motor Run Capacitor, Round12115 20/5 440V 3.125 2.00 0.45 20/5 MFD x 440V Dual Section Motor Run Capacitor, Round12117 80/10 440V 4.750 2.50 0.85 80/10 MFD x 440V Dual Section Motor Run Capacitor, Round12118 15/5 440V 3.125 2.00 0.40 15/5 MFD x 440V Dual Section Motor Run Capacitor, Round12119 35/6 440V 4.750 2.00 0.65 35/6 MFD x 440V Dual Section Motor Run Capacitor, Round12120 30/4 440V 3.875 2.00 0.55 30/4 MFD x 440V Dual Section Motor Run Capacitor, Round12124 50/10 440V 3.875 2.50 0.75 50/10 MFD x 440V Dual Section Motor Run Capacitor, Round12125 75/7.5 440V 4.750 2.50 0.95 75/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12126 30/3 440V 3.875 2.00 0.50 30/3 MFD x 440V Dual Section Motor Run Capacitor, Round12127 45/6 440V 4.750 2.00 0.65 45/6 MFD x 440V Dual Section Motor Run Capacitor, Round12160 60/3 440V 4.750 2.50 0.95 60/3 MFD x 440V Dual Section Motor Run Capacitor, Round12161 60/12.5 440V 4.750 2.50 0.90 60/12.5 MFD x 440V Dual Section Motor Run Capacitor, Round12162 65/10 440V 4.750 2.50 0.95 65/10 MFD x 440V Dual Section Motor Run Capacitor, Round12166 70/7.5 440V 4.750 2.50 0.95 70/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12168 75/5 440V 4.750 2.50 0.95 75/5 MFD x 440V Dual Section Motor Run Capacitor, Round12169 70/10 440V 4.750 2.50 0.90 70/10 MFD x 440V Dual Section Motor Run Capacitor, Round12172 45/10 440V 3.875 2.50 0.80 45/10 MFD x 440V Dual Section Motor Run Capacitor, Round12216 80/7.5 440V 4.750 2.50 0.90 80/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12219 45/4 440V 3.750 2.00 N/A 45/4 MFD x 440V Dual Section Motor Run Capacitor, Round12220 40/6 440V 4.750 2.00 0.65 40/6 MFD x 440V Dual Section Motor Run Capacitor, Round12255 70/5 440V 4.750 2.50 0.90 70/5 MFD x 440V Dual Section Motor Run Capacitor, Round12257 80/5 440V 4.875 2.50 0.95 80/5 MFD x 440V Dual Section Motor Run Capacitor, Round12278 25/5 440V 3.875 2.00 0.50 25/5 MFD x 440V Dual Section Motor Run Capacitor, Round12279 25/7.5 440V 3.875 2.00 0.50 25/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round

26 HVAC Parts 26



12281 30/5 440V 3.875 2.00 0.55 30/5 MFD x 440V Dual Section Motor Run Capacitor, Round12282 30/7.5 440V 3.875 2.00 0.50 30/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12283 35/5 440V 3.875 2.00 0.50 35/5 MFD x 440V Dual Section Motor Run Capacitor, Round12284 35/7.5 440V 3.875 2.50 0.80 35/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12285 40/4 440V 3.125 2.50 0.75 40/4 MFD x 440V Dual Section Motor Run Capacitor, Round12286 40/5 440V 3.125 2.50 0.85 40/5 MFD x 440V Dual Section Motor Run Capacitor, Round12287 40/7.5 440V 3.875 2.50 0.80 40/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12288 45/5 440V 3.875 2.50 0.75 45/5 MFD x 440V Dual Section Motor Run Capacitor, Round12289 45/7.5 440V 3.875 2.00 0.75 45/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12290 50/5 440V 3.875 2.50 0.80 50/5 MFD x 440V Dual Section Motor Run Capacitor, Round12291 50/7.5 440V 3.875 2.50 0.75 50/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12292 55/5 440V 3.875 2.50 0.75 55/5 MFD x 440V Dual Section Motor Run Capacitor, Round12293 55/7.5 440V 3.875 2.50 0.75 55/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12294 60/5 440V 3.875 2.50 0.75 60/5 MFD x 440V Dual Section Motor Run Capacitor, Round12295 60/7.5 440V 3.875 2.50 0.75 60/7.5 MFD x 440V Dual Section Motor Run Capacitor, Round12296 60/10 440V 3.875 2.50 0.75 60/10 MFD x 440V Dual Section Motor Run Capacitor, Round12299 55/10 440V 3.875 2.50 0.75 55/10 MFD x 440V Dual Section Motor Run Capacitor, Round

Universal Run & Start CapacitorTURBO 200

Features: The world's first multiple tapped, fluid-filled, metal can, motor-run capacitor, which eliminates

the need to inventory more than 200 individual single or dual value capacitors with a voltage rating up to 440 VAC.The Turbo200 capacitor has a combined total of 67.5 microfarads (mfd), with taps at 2.5mfd, 5.0mfd, another 5.0mfd, 10.0mfd, 20.0mfd and 25.0mfd.

Each part comes individually boxed, including 5 jumper wires. The Turbo200 is enclosed in a metal can. It is an internally protected (UL style), fluid-filled,

motor-run capacitor.


Part Number Microfarad Dimension Weight(lbs) Description

12200 2.5 mfd - 67.5 mfd,370V or 440V

2-1/2" Round (Base) x 4-1/2"Height 1.25 Turbo 200 Universal Run & Start Capacitor, 2.5 mfd - 67.5

mfd

TURBO 200 mini

Part Number Microfarad Dimension Weight(lbs) Description

12100 2.5 mfd - 12.5 mfd,370V or 440V

1-3/4" Round (Base) x2-5/16" Height 0.25 Turbo 200 Mini Universal Run & Start Capacitor,

2.5 mfd - 12.5 mfd

27 HVAC Parts 27

HVAC PartsCapacitorsMarsUniversal Run & Start CapacitorTURBO 200 X

Part Number Microfarad Dimension Weight(lbs)

Description

12300 5.0 mfd -97.5 mfd,370V or 440V

2-1/2" Round (Base) x5-3/4" Height

1.50 Turbo 200 X Universal Run & Start Capacitor, 5.0mfd -97.5 mfd

Turbolytic 50This is the most popular motor start capacitance valves used in air conditioning & refrigeration.



Description

11200 23 mfd -302 mfd,125V to 330V

2.5" Round (base) x5.75" Height

1.30 Turbolytic 50 Universal Motor Start Capacitor, 23mfd -302 mfd

Turbolytic JRThis is the most popular motor start capacitance valves used in air conditioning & refrigeration.



Description

11100 23 mfd -208 mfd,125V to 330V

2.5" Round (base) x4.50" Height

1.05 Turbolytic Junior Universal Run & Start Capacitor,23 mfd -208 mfd

28 HVAC Parts 28

HVAC PartsContactorsDiversitechDefinite Purpose Contactors 1 Pole

Part Number Amps Coil Voltage No of Poles Weight (lbs) DescriptionDP30124 30 24 1 0.52 Definite Purpose Contactors, 1 Pole, 30 Amp, 24V Coil

2 Pole

Part Number CoilVoltage

FLA No ofPoles

Height (In) Weight(lbs)

Description

DP30224 24 30 2 2.25 0.5 Definite Purpose Contactors, 2 Pole, 30 Amp, 24V CoilDP40224 24 40 2 2.3 0.55 Definite Purpose Contactors, 2 Pole, 40 FLA, 24V Coil, Square DDP302120 120 30 2 2.25 0.6 Definite Purpose Contactors, 2 Pole, 30 Amp, 120V Coil

3 Pole

Part Number CoilVoltage

Height(In)

FLA No ofPoles

Weight(lbs)

Description

DP40324 24 3.25 40 3 1 Definite Purpose Contactors, 3 Pole, 40 FLA, 24V Coil, Square DDP303120 120 3.23 30 3 1 Definite Purpose Contactors, 3 Pole, 30A, 120V CoilDP403240 240 3.25 40 3 1 Definite Purpose Contactors, 3 Pole, 40 FLA, 240V Coil, Square DDP503240 240 4.5 50 3 1.6 Definite Purpose Contactors, 3 Pole, 50A, 240V CoilDP603120 120 2.75 60 3 1.6 Definite Purpose Contactors, 3 Pole, 60 FLA, 120V Coil, Square DDP603240 240 2.75 60 3 1.6 Definite Purpose Contactors, 3 Pole, 60 FLA, 240V Coil, Square D

29 HVAC Parts 29

HVAC PartsContactorsSupcoDefinite Purpose ContactorsFeatures: • Silver Cadmium Oxide Contacts • Terminations: #10-32 screw - 20, 25 & 30 FLA Models, Box Lug - 40, 50, 60, 75 & 90 FLA Models • UL Approved Benefits: • Economically priced • Space saving dimensions allow for smaller panels and more wiring room • Interchangeable mounting with many competitive contactors • Complete competitive cross-reference available Applications: • Low drop out voltage making them ideal for any air conditioning, heating and refrigeration application Accessories: • Field Installed SPDT Auxiliary Contacts • Used with 50-60 and 75-90 FLA contactors

http://supco.com

1.5 PolePart Number Coil Voltage FLA No of

PolesDescription

DP30241 24 30 1.5 Definite Purpose Contactors, 1.5 Pole, 30FLA, 24V CoilDP302401 240 30 1.5 Definite Purpose Contactors, 1.5 Pole, 30FLA, 240V Coil

2 PolePart Number Coil

VoltageFLA No of

PolesDescription

DP30242 24 30 2 Definite Purpose Contactors, 2 Pole, 30FLA, 24V CoilDP40242 24 40 2 Definite Purpose Contactors, 2 Pole, 40FLA, 24V CoilDP302402 240 30 2 Definite Purpose Contactors, 2 Pole, 30FLA, 240V CoilDP402402 240 40 2 Definite Purpose Contactors, 2 Pole, 40FLA, 240V Coil

3 PolePart Number Coil

VoltageFLA No of

PolesDescription

DP30243 24 30 3 Definite Purpose Contactors, 3 Pole, 30FLA, 24V CoilDP40243 24 40 3 Definite Purpose Contactors, 3 Pole, 40FLA, 24V CoilDP50243 24 50 3 Definite Purpose Contactors, 3 Pole, 50FLA, 24V CoilDP60243 24 60 3 Definite Purpose Contactors, 3 Pole, 60FLA, 24V CoilDP302403 240 30 3 Definite Purpose Contactors, 3 Pole, 30FLA, 240V CoilDP402403 240 40 3 Definite Purpose Contactors, 3 Pole, 40FLA, 240V CoilDP502403 240 50 3 Definite Purpose Contactors, 3 Pole, 50FLA, 240V CoilDP602403 240 60 3 Definite Purpose Contactors, 3 Pole, 60FLA, 240V Coil

30 HVAC Parts 30

HVAC PartsContactorsWhite RodgersDefinite Purpose Contactors 2 Pole

Features: • Designed for Air Conditioning and Heating Equipment,Low VA coil for cooler operation and increased life,Quiet operation,Universal style mounting bracket fits existing mounting holes • Screw terminals or pressure connectors and double 1/4” quick connects provided on all models for easy Installation, Double break contacts ensure positive make and break Specifications: • Insulating Material: Contact block and carrier are high quality electrical-grade thermosetting resin • Mechanical Life: Conforms to UL and ARI specifications • Electrical Life: Conforms to UL and ARI specifications • Agency: U.L. file number E12139 • Operate: 85% of nominal coil voltage; 110% maximum safe operate • Coil Insulation: Class B (130°C) • Termination: Pressure Connectors and Double 1/4” Q.C. • Duty Cycle: Continuous Contact Ratings

Type Voltage FLA LRA RES 277 30 150 40 480 30 75 40 90-244

90-245 600 30 50 40

Part Number Amps Voltage AC Weight (oz) Description90-244 30 24 9.5 oz (approx) Definite Purpose Contactors, 2 Pole, 30 Amps, 24 VAC Coil90-245 30 120 9.5 oz (approx) Definite Purpose Contactors, 2 Pole, 30 Amps, 120 VAC CoilNote:*30 amp models have no cover on top

Delay TimersMarsSolid State TimersSeries 320 - Delay on Break Timer

Two MARS2 Delay on Break Timers, dial adjustable or fixed, are designed to prevent short cycling of air conditioning and heat pump compressors. The compact timers mount in any position and are UL recognized


Part Number Voltage Cubes Delay Type Type Of Adjustment Weight Description32001 19-240 41.0000 On Break Dial Adj. 2 Terminal 0.15 6 sec. – 10 min Adjustable Delay on Break Timer

Series 320 - Delay on Make Timer The MARS2 Delay on Make Timer is designed to delay energization and prevent short cycling. This one unit covers all operating voltages and time delays. The compact timer mounts in any position and features easy two wire installation. UL recognized


Part Number Voltage Cubes Delay Type Type Of Adjustment Weight Description32091 19-240 41.0000 On Make Dial 0.15 6 sec. – 10 min Adjustable Delay on Make Timer

31 HVAC Parts 31

HVAC PartsFan CenterDiversitechModel - D-90113

Features: • Low voltage for one and two speed fan motors; • Auxiliary circuits in heating, cooling, or heating/cooling applications. • UL, CUR file E237660 • Color-coded pre-stripped leads • Mounts directly to 4” electrical box


Part Number Voltage Height (In) Width (In) Depth (In) Weight (lbs) DescriptionD-90113 120 4.25 5 5 2 Fan Center, 120V, DPDT Relay

HoneywellModel - R8239B

Features: • NEMA standard Type D transformer (included) powers low voltage control systems. • Provide overload protection for transformer. • Convenient connections for thermostat, and heating-cooling equipment wiring. • Mount on standard 4 x 4 junction box. • Can be mounted in any indoor location without additional enclosure. • Relay is easily replaced without disturbing wiring. • Include relay enclosures. Application: • For system with F50 Electronic Air Cleaner humidifier and blower motor.


Part Number Hp Hz Voltage DescriptionR8239B1043 3/4 50 Hz/60 Hz 120 Vac 40 VA Fan Center with DPDT Switching Action Including R8222DR8239B1076 3/4 50 Hz/60 Hz 120 Vac; 208 Vac; 240 Vac 50 VA Fan Center with DPDT Switching Action Including R8222D

SupcoModel - FC4011 & Universal FC4031

Features: • DPDT plug-in style relay (90340) • 40 VA transformer • Mounts directly to 4” x 4” electrical box • Color coded wiring for easy installation Benefits: • Universal FC4031 includes multi tap primary voltages for all applications, reduces inventory Applications: • Provides low voltage control of line voltage fan motors and auxiliary circuits in HVAC systems

http://supco.com

VoltagePart Number HP Primary Secondary DescriptionFC4011 3/4 120 Vac 24Vac Fan Center, 40VA, 120VACFC4031 3/4 120 Vac, 208 Vac, 240 Vac 24Vac Universal Fan Center, 40VA, 120/208/240VAC

32 HVAC Parts 32

HVAC PartsRelaysDiversitechGeneral Purpose Relays - 8400 Series

Part Number AmpsRes/Ind

Coil Voltage SwitchType

Height(In)

Weight(lbs)

Description

D90-290Q 16/8 24 VAC SPST-NO 1.75 0.2 General Purpose Relay, 24VAC, SPST-NO, 16/8 Amp Res/IndD90-293Q 8/8 24 VAC SPDT 1.75 0.2 General Purpose Relay, 24VAC, SPDT, 8/8 Amp Res/Ind

General Purpose Relays - 9400 Series

Part Number Amps Res Switch Type Height (In) Weight(lbs)

Description

D90-360 18 SPST-NO 1.75 0.2 General Purpose Relay, 24VAC, SPST-NO, 18 Amp ResD90-370 18 SPDT 1.75 0.2 General Purpose Relay, 24VAC, SPDT, 18 Amp ResD90-380 18 SPST NO+NC 1.6 0.2 General Purpose Relay, 24VAC, SPST NO+NC, 18 Amp Res

General Purpose Switching Relays

Part Number Coil Voltage Height (In) Weight(lbs)

Description

D-90340 24 2 0.4 General Purpose Switching Relay, 24VAC, Power Terminals 1 to 6D-90341 110/120 2.25 0.4 General Purpose Switching Relay, 110/120VAC, Power Terminals 1 to 6D-90342 208/240 2 0.4 General Purpose Switching Relay, 208/240VAC, Power Terminals 1 to 6

Potential Relays

Part Number Coil Voltage Height (In) Weight (lbs) DescriptionDPR066 395 2.5 0.2 Potential Relay, 395VAC Coil, Pick-Up 223-252 Min - Max

33 HVAC Parts 33

HVAC PartsRelaysFunctional DevicesEnclosed Pilot RelayModel-RIB2401D

Specifications: • # Relays & Contact Type: One (1) SPDT Continuous Duty Coil • Expected Relay Life: 10 million cycles minimum mechanical • Approvals: UL Listed, UL916, UL864, C-UL California State Fire Marshal, CE, RoHS • Housing Rating: UL Accepted for Use in Plenum, NEMA 1 • Gold Flash: No • Override Switch: No

http://www.functionaldevices.com/

Part Number Coil Voltage:AC/DC

Dimensions Operate Time (ms) Relays Description

RIB2401D 24 Vac/dc 1.70 x 2.80 x 1.50 with.50 NPT nipple

8 1 DPDT Enclosed Relay 10 Amp DPDT with 24 Vac/dc/120Vac Coil

Contact Ratings: • 10 Amp Resistive @ 277 Vac • 10 Amp General Use @ 277 Vac • 1/2 HP @ 120/240 Vac (N/O) • 1/3 HP @ 120/240 Vac (N/C) • B300 Pilot Duty • 120 Vac 30A Make 3A Break (360 VA) • 240 Vac 15 A Make 1.5A Break (360 VA) • 208 Vac 17.3A Make 1.73A Break (360 VA) • 277 Vac 13A Make 1.3A Break (360 VA)

• 24 Vac 30A Make 5A Break (120VA) 5A Max Coil Current: • 24 mA @ 18 Vac • 32 mA @ 24 Vac • 40 mA @ 30 Vac • 20 mA @ 20 Vdc • 24 mA @ 24 Vdc • 36 mA @ 30 Vdc • 31 mA @ 120 Vac

SS

Model-RIBH1CSpecifications: • # Relays & Contact Type: One (1) SPDT Continuous Duty Coil • Expected Relay Life: 10 million cycles minimum mechanical • Approvals: UL Listed, UL916, UL864, C-UL California State Fire Marshal, CE, RoHS • Housing Rating: UL Accepted for Use in Plenum, NEMA 1 • Gold Flash: No • Override Switch: No


Part Number Resistive(Amp)

Coil Voltage: AC/DC OperatingTemperature °C(°F)

Relays Description

RIBH1C 10 A 10-30 Vac/dc -34°C to -60°C(-30 to140° F)

1 SPDT Enclosed Relay 10 Amp SPDT with 10-30Vac/dc/208-277 Vac Coil

Contact Ratings: • 10 Amp Resistive @ 277 Vac • 10 Amp Resistive @ 28 Vdc • 480 VA Pilot Duty @ 240-277 Vac • 480 VA Ballast @ 277 Vac • Not rated for Electronic Ballast • 600 Watt Tungsten @ 120 Vac (N/O) • 240 Watt Tungsten @ 120 Vac (N/C) • 1/3 HP @ 120-240 Vac (N/O) • 1/6 HP @ 120-240 Vac (N/C) • 1/4 HP @ 277 Vac (N/O) • 1/8 HP @ 277 Vac (N/C)

Coil Current: • 33 mA @ 10 Vac • 35 mA @ 12 Vac • 46 mA @ 24 Vac • 55 mA @ 30 Vac • 13 mA @ 10 Vdc • 15 mA @ 12 Vdc • 18 mA @ 24 Vdc • 20 mA @ 30 Vdc • 28 mA @ 120 Vac (RIBU1C) • 39 mA @ 208-277 Vac (RIBH1C)

34 HVAC Parts 34

HVAC PartsRelaysFunctional DevicesEnclosed Pilot RelayModel-RIBU1C

Specifications: • # Relays & Contact Type: One (1) SPDT Continuous Duty Coil • Expected Relay Life: 10 million cycles minimum mechanical • Approvals: UL Listed, UL916, UL864, C-UL California State Fire Marshal, CE, RoHS • Housing Rating: UL Accepted for Use in Plenum, NEMA 1 • Gold Flash: No • Override Switch: No


Part Number Coil Voltage:AC/DC

OperatingTemperature °C(°F)

Pilot Duty Relays Description

RIBU1C 10-30 Vac/dc -34°C to -60°C(-30 to140° F)

480 VA 1 SPDT Enclosed Relay 10 Amp SPDT with 10-30 Vac/dc/120Vac Coil

Contact Ratings: • 10 Amp Resistive @ 277 Vac • 10 Amp Resistive @ 28 Vdc • 480 VA Pilot Duty @ 240-277 Vac • 480 VA Ballast @ 277 Vac • Not rated for Electronic Ballast • 600 Watt Tungsten @ 120 Vac (N/O) • 240 Watt Tungsten @ 120 Vac (N/C) • 1/3 HP @ 120-240 Vac (N/O) • 1/6 HP @ 120-240 Vac (N/C) • 1/4 HP @ 277 Vac (N/O) • 1/8 HP @ 277 Vac (N/C)

Coil Current: • 33 mA @ 10 Vac • 35 mA @ 12 Vac • 46 mA @ 24 Vac • 55 mA @ 30 Vac • 13 mA @ 10 Vdc • 15 mA @ 12 Vdc • 18 mA @ 24 Vdc • 20 mA @ 30 Vdc • 28 mA @ 120 Vac (RIBU1C) • 39 mA @ 208-277 Vac (RIBH1C)

Expandable Switching RelayFeatures: • Electronic Fuse - Auto reset • Robust Transformer - Enough to handle up to 15 zones • Double-sided printed circuit board construction - 100% factory tested for reliability • Clearly marked terminals with clamping plates • Separate xx (isolated switch) & ZC/ZR Relays protect boiler aquastat • Priority Safety Timer - Ensures other zones get heat every 30 minutes & prevents freeze-ups • 5-second Time Delay for boiler shut-off • Relay Diagnostic Light - Easily seen through window on cover • Premium plug-in replaceable relays 24 VAC Transformer Terminals • Plug-in, Add-on Zone Modules (AD-1 or AD-4) • Switchable Priority • High relay load rating - 1/3HP


Part Number Amps Hz Voltage Zones DescriptionARM4P 7.2 60 120 4 4 Zone Expandable Switching Relay with PriorityARM6P 7.2 60 120 6 6 Zone Expandable Switching Relay with Priority

35 HVAC Parts 35

HVAC PartsRelaysFunctional DevicesZone Valve Controls

Features: • Built-in priority for indirect hot water heater applications • Switchable priority (ON/OFF) • Controls three or four wire 24v zone valves • Front window with clearly visible LED diagnostic lights for easy troubleshooting • Easy replacement with plug-in priority and isolated relays • Clearly marked terminal for easy and accurate installation • 5 year warranty, 100% factory tested, made in USA


Part Number Zone DescriptionAZ-4P 4 4 Zone Valve Control with Priority

White RodgersEnclosed Fan Relays

Features: • Used for Switching Single or Two Speed Fan Motors, Solenoids, Relays, Resistive Loads and General Purpose Switching • Compact, totally enclosed design,For heating and cooling applications and general switching • Quiet, reliable and economical Specifications: • Mechanical Life (no load): 1,000,000 operations, 60 operations/min • Electrical Life (rated load): 1,00,000 operations, 6 operations/min. Load test making inrush rating (0.4 to 0.5 P.F.); breaking 100% continuous rating (0.64 to 0.8 P.F.) • Agency: U.L. file number E12139 or E22381, C.S.A. file number LR13360 • Coils, Insulation: Class B • Coils, Termination: 1/4” Quick Connect • Coils, Operate: 85% of nominal coil voltage; 110% maximum safe operate • Coils, Duty Cycle: Continuous

Part Number Switch Type Temperature Range Weight (oz) Description90-290Q SPNO -40°F to 150°F 2.5 oz (approx) Enclosed Fan Relay, Single Pole Normally Open, 24 VAC90-293Q SPDT -40°F to 150°F 2.5 oz (approx) Enclosed Fan Relay, Single Pole Double Throw, 24 VAC

Contact Rating: 125/250 VAC Inductive Resistive 8 Amps Continuous 25 Amps. Inrush 16 Amps Continuous

Wiring Diagrams

Fan Control Center Relay & TransformerReplacement Relay for Fan Control Center

Part Number Dimensions Description90-340 2-1/8” x 1-7/8” x 2-1/4” Approx DPDT Universal Plug-in Replacement Relay for Fan Control

Center, Replaces 90-112, 90-113, 90-117, 90-118E, 90-119,90-130

36 HVAC Parts 36

HVAC PartsRelaysWhite RodgersHeavy Duty Enclosed Fan Relays

Features: • Heavy-Duty General Purpose Relay Operates in Any Position • Compact, totally enclosed design,For heating and cooling applications and general switching • Quiet, reliable and economical Specifications: • Mechanical Life (no load): 1,000,000 operations, 120 operations/min • Electrical Life (rated load): 100,000 operations, 6 operations/min. Load test making inrush rating (0.4 to 0.5 P.F.); breaking 100% continuous rating (0.65 to 0.8 P.F.) • Agency: U.L. file number E12139 or E22381, C.S.A. file number LR13360 • Coils, Insulation: Class B • Coils, Termination: 1/4” Quick Connect • Coils, Operate: 85% of nominal coil voltage; 110% maximum safe operate • Coils, Duty Cycle: Continuous

Part Number CoilsFrequency

VoltageAC

Switch Type Weight(oz)

Description

90-370 50 / 60 Hz 24 SPDT 2.3 oz(approx)

Heavy Duty Enclosed Fan Relays, Single Pole Double Throw, 24 VAC

90-380 50 / 60 Hz 24 SPNO/SPNC 2.3 oz(approx)

Heavy Duty Enclosed Fan Relays, Isolated Contacts, 24 VAC

Contact Rating: Inductive Resistive

2 Amps. Continuous 60 Amps. Inrush @ 125 VAC 8 Amps. Continuous 8 Amps. Continuous 48 Amps. Inrush @ 250 VAC @ 277 VAC

Repair PartsDiversitechCompressor Repair KitTerm Lok Compressor Repair Kit

Features: • Brass precision stake on • No corrosion or burn off • Guaranteed for the life of the compressor


Part Number Height (In) Depth (In) Width (In) Weight (lbs) DescriptionTLC-3-8 0.5 8.75 6 0.8 3 Wire, 8 Gauge Connection Compressor Repair KitTLC-3-10 0.5 7.5 6 0.4 3 Wire, 10 Gauge Connection Compressor Repair KitTLC-3-12 0.5 9 6 0.4 3 Wire, 12 Gauge Connection Compressor Repair Kit

37 HVAC Parts 37

HVAC PartsTransformersDiversitechTransformers - Class 2 1585 UL RecognizedModel - T1401

Voltage

Part Number VA Height(In)

Width (In) Primary Secondary Weight(lbs)

Description

T1401 40 2.5 4 120 Vac 24V 1.6 Transformers, 40VA, 120 Primary, 24VSecondary

Model - T1404

Voltage


Width(In)

Primary Secondary Weight(lbs)

Description

T1404 40 2.5 2.5 120 Vac,208 Vac,240 Vac

24V 1.55 Transformers, 40VA, 120/208/240Primary, 24V Secondary

Model - T2404

Voltage


Width(In)


Description

T2404 40 2.5 2.5 120 Vac,208 Vac,240 Vac

24V 2.2 Transformers, 40VA, 120/208/240Primary, 24V Secondary

Model - T3401

Voltage


Width(In)


Description

T3401 40 4.5 4.5 120 Vac 24V 2.4 Transformers, 40VA, 120 Primary, 24VSecondary, Multi-Mount

Model - T3403

Voltage


Width(In)


Description

T3403 40 3 4.5 120 Vac,208 Vac,240 Vac

24V 2.2 Transformers, 40VA, 120/208/240Primary, 24V Secondary, Multi-Mount

38 HVAC Parts 38

HVAC PartsTransformersDiversitechTransformers - Class 2 1585 UL RecognizedModel - T3501

Voltage


Width(In)


Description

T3501 50 2.5 4.25 120 Vac,208 Vac,240 Vac

24V 2.2 Transformers, 50VA, 120/208/240Primary, 24V Secondary,Multi-Mount

Model - T5401

Voltage


Width (In) Primary Secondary Weight(lbs)

Description

T5401 40 2.75 4.25 120 Vac 24V 2.2 Transformers, 40VA, 120 Primary, 24VSecondary, Multi-Mount

Model - T6752

Voltage


Width(In)


Description

T6752 75 3.25 2.75 120 Vac,208 Vac,240 Vac

24V 3.6 Transformers, 75VA, 120/208/240Primary, 24V Secondary, Heavy Dutywith External Use

Model - T6753

Voltage


Width(In)


Description

T6753 75 3.75 3 120 Vac,208 Vac,240 Vac,480 Vac

24V 3.8 Transformers, 75VA, 120/208/240/480Primary, 24V Secondary, Heavy Dutywith External Use

Model - T7752

Voltage


Width(In)


Description

T7752 75 3.25 2.75 120 Vac,208 Vac,240 Vac,480 Vac

24V 3.8 Transformers, 75VA, 120/208/240/480Primary, 24V Secondary, Heavy Dutywith Circuit Breaker

39 HVAC Parts 39

HVAC PartsTransformersHoneywellAccessoriesFoot/Plate Mount

Features: • Meets NEC Class 2 not wet, Class 3 wet and UL 1585 requirements • Transformer marked NEMA Type E • Overload protection provided,Color-coded leadwires for primary connections Specifications: • Includes: Built-in protection. Primary winding burnout • Mounting: Foot mounted or 4x4 in plate • Approvals, Underwriters Laboratories Inc.: UL Component Recognized. • Approvals, Canadian Standards Association: Certified • NEMA Rating: NEMA type E • Approvals, N.E.C.: N/S


VoltagePart Number Electrical

RatingsHz Priamry Secondary Description

AT87A1106 24 Vac at 48 VA 50 Hz; 60 Hz 120 Vac, 208 Vac, 240Vac

26.5 V.O.C. Foot/Plate Mount 120/208/240 Vac Transformer

Foot/Plate/Clamp MountFeatures: • Override protection provided • Features color-coded leadwires for primary connections • Energy limiting and meets NEMA Standard DC20-1992 • Transformer is marked NEMA Type D • Meets NEC Class 2 not wet, Class 3 wet and UL 1585 requirements Specifications: • Mounting: Can be foot mounted, plate mounted on 4 x 4 in., 4 in. octagon, or 2 x 4 in. electrical boxes

(transformer all above plate or 3/4 above plate); or clamp mounted via a junction box knockout. • Approvals, Underwriters Laboratories Inc.: UL Component Recognized. • Approvals, Canadian Standards Association: Certified • Customer Special: N/S • NEMA Rating: NEMA type D • Approvals, N.E.C.: NEC Approved


VoltagePart Number Electrical

RatingsHz Primary Secondary Description

AT72D1691 24 Vac at40 VA

50 Hz; 60 Hz 208 Vac, 240 Vac 26.5 V.O.C. Foot Mount, Plate Mount, or Clamp Mount 208/240VacTransformer

AT72D1683 24 Vac at40 VA

50 Hz; 60 Hz 120 Vac 26.5 V.O.C. Foot Mount, Plate Mount, or Clamp Mount 120VacTransformer

40 HVAC Parts 40

HVAC PartsTransformersSupcoControl TransformersFeatures:• A complete line of Control transformers designed for HVAC/R applications • Foot or Multi-mount, Output from 20 - 100 VA • A multitude of Primary and Secondary combinations • UL approved • Circuit breakers and fuses where noted

http://supco.com

Foot Mount Transformers

VoltagePart Number Mount

TypeOutput

VAPrimary Secondary Description

SXT101 Foot 40 120 Vac, 208 Vac, 240 Vac 2.5/12/24 V Foot Mount Control Transformer, 120/208/240 V, 40 VA, FuseSXT105 Foot 40 120 Vac, 208 Vac, 240 Vac 24V Foot Mount Control Transformer, 120/208/240 V, 40 VASXT79R Foot 75 120 Vac, 208 Vac, 240 Vac,

480 Vac24V Foot Mount Control Transformer, 120/208/240/480 V, 75 VA,

Breaker

Multi-Mount Transformers

VoltagePart Number Primary Secondary DescriptionSXT106 120 Vac, 208 Vac, 240 Vac 24V Multi Mount Control Transformer, 120/208/240 V, 40 VASXT148 120 Vac, 208 Vac, 240 Vac 2.5/12/24 V Multi Mount Control Transformer, 120/208/240 V, 48 VA

White RodgersClass 2 TransformersFoot-Mount Transformers

VoltagePart Number Hz Primary Secondary Description90-T40F3 60 120 / 208 / 240V 24V Transformer, 40VA, 60 Hz, 120/208/240V Primary, 24V

Secondary, Foot MountPrimary Side Secondary Side

Common 120V 208V 240V Common 24V Black White Red Orange Blue Yellow

Black is common with respect to the transformer winding, not the external circuit.

41 HVAC Parts 41

Motors & AccessoriesBlower MotorsCenturySplit Phase Belted Resilient Base MotorsSingle Speed, Open Drip-proof

Features: • Class B Insulation • Continuous Duty • Resilient Base • Reversible • 60 HZ • Single Speed Applications: Centrifugal Pumps, Blowers, Fans

http://www.centuryelectricmotor.com/Applications/AdvanceCatalogSearch.aspx

.

Part Number Hp RPM Voltage Amps Hz Enclosure Phase DescriptionGF2024 1/4 1725 115 5 60 ODP 1 Split Phase Belted Fan & Blower Open

Drip-proof, 1/4 HP, 115V, 1725 RPMGF2034 1/3 1725 115 5.9 60 Open 1 Split Phase Belted Fan & Blower Open

Drip-proof, 1/3 HP, 115V, 1725 RPMGF2054 1/2 1725 115 7.2 60 ODP 1 Split Phase Belted Fan & Blower Open

Drip-proof, 1/2 HP, 115V, 1725 RPM

Type “C”Dim. “AG”Dim. Shaft Dimensions

GF2024 9.2 7.5 1/2” Flat x 1-5/8” GF2034 9.4 7.8 1/2” Flat x 1-5/8” GF2054 9.9 8.3 1/2” Flat x 1-5/8”

Notes: 92. 48/56 FR = 1/2” x 1.5” Shaft with 5/8” shaft adapter - 48/56 slotted 3” height base

BracketDiversitechFlex BracketMotor Mount Flex Bracket

Part Number Height (In) Width (In) Depth (In) Weight (lbs) DescriptionDMB-3 3.25 9.5 10.25 1.2 5-1/2" Motor Mount Torsion Flex Bracket

Lug AssemblyMotor Brackets

Part Number Height (In) Width (In) Depth (In) Weight (lbs) DescriptionDMB-1 8.25 8.25 8.25 1.4 Fixed Lug Assembly for 5-1/2" Dia. MotorsDMB-2 2.75 6.75 9.25 0.8 Adjustable Lug Assembly for 5-1/2" Dia.

Motors

42 HVAC Parts 42

Motors & AccessoriesCondenser Fan MotorsCentury5.0" DiameterMultiFit Condenser Fan Motors

Features: • All angle mount • Reversing plug • Single speed • 60o C ambient • Double sealed ball bearings • Energy efficient PSC design • 36” leads • Multi-mounting system • 1/2” Dia. flatted shaft • Multi-horsepower, one simple connection • Totally enclosed


Part Number HP RPM Voltage Amps Rotation Frame Description9722 1/8, 1/10, 1/12 1075 208-230 0.9 Reversible 42Y 5” Dia. MultiFit Condenser Fan Motor, 1/8, 1/10, 1/12 HP,

208-230V, 1075 RPM9723 1/4,1/5,1/6 1075 208-230 2 Reversible 42Y 5” Dia. MultiFit Condenser Fan Motor, 1/4, 1/5, 1/6 HP,

208-230V, 1075 RPM9724 1/4, 1/5, 1/6 1625 208-230 1.6 Reversible 42Y 5” Dia. MultiFit Condenser Fan Motor, 1/4, 1/5, 1/6 HP,

208-230V, 1625 RPM

Part No. HP Approximate RPM Approximate Amps

1/8 1075 0.9 1/10 1135 0.6 9722 1/12 1155 0.5 1/4 1075 2.0 1/5 1145 1.2 9723 1/6 1165 1.0 1/4 1625 1.6 1/5 1715 1.0 9724 1/6 1759 0.7

Part No. BM C N T

9722 4.0 7.5 3.0 .50 9723, 9724 4.5 7.5 3.0 .50

43 HVAC Parts 43

Motors & AccessoriesCondenser Fan MotorsCentury5-5/8" Diameter4-in-1 and HeatMaster Condenser Fan Motor

Features: • All Angle Mounting • Energy Efficient PSC Design $ • Removable Drain Plugs Each End • Rheem Mounting Holes (Screws Included) • Totally Enclosed • Multi-application, Condenser Fans • Reversible • 60o or 70o C Ambient • Sleeve or Ball Bearing • UL and CSA Approved • 36” Leads or 48” Leads • Easy installation, one simple connection and a 5, 7.5, or 10 mfd 370 Volt capacitor is all that is

needed. Replaces hundreds of 1/8 - 1/2 HP applications


Part Number HP RPM Voltage Amps Rotation Frame DescriptionORM5454BF 1/8 - 1/15 1075 208-230 0.8 Reversible 48Y 5-5/8" Dia. 4-in-1 and HeatMaster Condenser Fan Motor,

1/8 - 1/15 HP, 208-230V, 1075 RPMORM5458BF 1/3-1/6 1075 208-230 2.0 Reversible 48Y 5-5/8" Dia. 4-in-1 and HeatMaster Condenser Fan Motor,

1/3-1/6 HP, 208-230V, 1075 RPMORM5484BF 1/8 - 1/15 825 208-230 0.8 Reversible 48 5-5/8" Dia. 4-in-1 and HeatMaster Condenser Fan Motor,

1/8 - 1/15 HP, 208-230V, 825 RPMORM5488BF 1/3-1/8 825 208-230 2.1 Reversible 48 5-5/8" Dia. 4-in-1 and HeatMaster Condenser Fan Motor,

1/3-1/8 HP, 208-230V, 825 RPM

Part No. BM C N T T1 Notes ORM5458BF 4-1/8 10-5/8 6-1/2 7/8 1 $ ORM5488BF 4-7/8 11-3/8 6-1/2 7/8 1 $ ORM5484BF 4-1/4 10-3/4 6-1/2 7/8 1 $ ORM5454BF 4 10-1/2 6-1/2 7/8 1 $

$Energy Efficient PSC Design

44 HVAC Parts 44

Motors & AccessoriesCondenser Fan MotorsCentury5-5/8" DiameterMasterFit Multihorsepower Replacement Motors

Features: • Energy Efficient, Different Capacitor/ Speed Combinations • Designed for 370V Capacitor (not furnished) • Permanent Split Capacitor, Ball and Sleeve Bearing • Rotation Reversible, Resilient Rings on Blower Motors • Extended Thru Bolts, Automatic Protector • Class B Insulation, Continuous Duty – Air Over • Mounts by Belly Band, Thru Bolts or Shell Holes, Rheem Mounting Holes in Shell Benefits: • Less Inventory Required, Versatile • Time Saver, Easy Installations

http://www.centuryelectricmotor.com/Applications /AdvanceCatalogSearch.aspx

Part Number HP Voltage ShaftDimension

ShellLength

Description

FE6000 1/3-1/6 208-230 1/2" x 6" 4.86" 5-5/8” Dia. MasterFit Multihorsepower Condenser Fan ReplacementMotor, Totally Enclosed Air Over, 1/3 to 1/6 HP, Shaft Length 4.86"



FE6003 1/2-1/5 208-230 1/2"x 6" 5.61" 5-5/8” Dia. MasterFit Multihorsepower Condenser Fan ReplacementMotor, Totally Enclosed Air Over, 1/2 to 1/5 HP, Shaft Length 5.61"

FE6004 3/4-1/4 208-230 1/2" x 6" 5.87" 5-5/8” Dia. MasterFit Multihorsepower Condenser Fan ReplacementMotor, Totally Enclosed Air Over, 3/4 to 1/4 HP, , Shaft Length 5.87"

Capacitor (mfd) 370 VoltsStock Number HP 208V 230V Speeds to Use Amps RPM

1/3 10 7.5 High (black) 1.9 825 1/4 10 7.5 High (black) 1.5 835 1/5 10 7.5 Low (red) 1.2 825 FE6001

1/6 10 7.5 Low (red) 1.0 835 1/2 12.5 10 High (black) 2.4 825 1/3 12.5 10 High (black) 1.7 835 1/4 12.5 10 Low (red) 1.4 825 FE6003

1/5 12.5 10 Low (red) 1.1 835 1/3 7.5 5 High (black) 2.8 1075 1/4 7.5 5 High (black) 2.0 1135 1/5 7.5 5 Low (red) 1.7 1075 FE6000

1/6 7.5 5 Low (red) 1.5 1125 1/2 12.5 10 High (black) 3.9 1075 1/3 12.5 10 High (black) 2.2 1135 1/4 12.5 10 Low (red) 1.6 1075 FE6002

1/5 12.5 10 Low (red) 1.3 1125 3/4 15 12.5 High (black) 5.3 1075 1/2 15 12.5 High (black) 3.0 1135 1/3 15 12.5 Low (red) 1.9 1075 FE6004

1/4 15 12.5 Low (red) 1.0 1125

45 HVAC Parts 45

Motors & AccessoriesCondenser Fan MotorsCentury5-5/8" DiameterMasterFit Pro Condenser Fan Motor, Totally Enclosed

Features: • Energy Efficient $, Permanent Split Capacitor, Extended Thru Bolts • 40° C Ambient, Class B Insulation for Blower Motors • 70° C Ambient, Class F Insulation for Condenser Fan Motors • Rheem Mounting Holes in Shell, All Purpose Capacitor Included


Part Number HP RPM Voltage Amps Shaft Length DescriptionFE6000F 1/3-1/6 1075 208-230 2.6 1/2" x 6.5" MasterFit Pro Condenser Fan Motor, Totally Enclosed,

1/3-1/6 HP, 208-230V, 1075 RPMFE6001F 1/3-1/6 825 208-230 1.9 1/2" x 6.5" MasterFit Pro Condenser Fan Motor, Totally Enclosed,

1/3-1/6 HP, 208-230V, 825 RPMFE6002F 1/2 - 1/5 1075 208-230 3.9 1/2" x 6.5" MasterFit Pro Condenser Fan Motor, Totally Enclosed, 1/2 -

1/5 HP, 208-230V, 1075 RPMFE6003F 1/2 - 1/5 825 208-230 2.4 1/2" x 6.5" MasterFit Pro Condenser Fan Motor, Totally Enclosed, 1/2 -

1/5 HP, 208-230V, 825 RPMFE6004F 3/4 - 1/4 1075 208-230 5.8 1/2" x 6.5" MasterFit Pro Condenser Fan Motor, Totally Enclosed, 3/4 -

1/4 HP, 208-230V, 1075 RPMNotes: Motor is approximately 10% stronger and has higher starting torque for 1/6, 1/5, 1/4, and 1/3 HP rating with the 7.5 mfd 370 volt capacitor. Single Speed - Permanent Split Capacitor - Totally Enclosed - Insulation Class B

Features: • Energy Efficient $, Permanent Split Capacitor • 1/2” Dia. Flatted Shaft, 26” (Minimum) to 48” Leads • All Angle Mount, 60° or 70° C Ambient, Auto Protector, 6 and 8 Pole • Extended Thru Bolts, Air Over Duty Cycle, UL CSA


Part Number HP RPM Voltage Amps Rotation DescriptionFSE1016SV1 1/6 1075 208 - 230 1.4 Reversible 5-5/8" Dia. Totally Enclosed Condenser Fan Motor, 1/6 HP,

208-230V, 1075 RPM, ReversibleFSE1026SV1 1/4 1075 208 - 230 2.0 Reversible 5-5/8" Dia. Totally Enclosed Condenser Fan Motor, 1/4 HP,




208-230V, 1075 RPM, Reversible

9. Reversing Plug 308. 1/2” hub on shaft end frame with slinger. Grommet on lead exits. 281. 36” leads $ Energy Efficient

Part No. BM C N T T1 Notes FSE1016SV1 3.99 10.43 6.44 .67 .88 9,308,281,$ FSE1026SV1 4.36 10.80 6.44 .56 .88 9,308,281,$ FSE1036SV1 4.36 10.80 6.44 .56 .88 9,308,281,$ FSE1056SV1 5.24 11.74 6.50 .88 1.12 9,308,281,$ FSE1076SV1 5.61 12.06 6.45 .61 .88 9,308,281,$

46 HVAC Parts 46

Motors & AccessoriesCondenser Fan MotorsCentury5-5/8" DiameterSingle Speed - Permanent Split Capacitor - Totally Enclosed - Insulation Class F

Features: • Energy Efficient $ • Permanent Split Capacitor • 1/2” Dia. Flatted Shaft • 26” (Minimum) to 48” Leads • All Angle Mount • 60° or 70° C Ambient • Auto Protector • 6 and 8 Pole • Extended Thru Bolts • Air Over Duty Cycle • UL CSA


Part Number HP RPM Voltage Amps Enclosure Rotation DescriptionFEH1026S 1/4 1075 460 1.0 Enclosed Reversible 5-5/8" Dia. Totally Enclosed Condenser Fan Motor, 1/4 HP,

460V, 1075 RPM, ReversibleFEH1036S 1/3 1075 460 1.3 Enclosed Reversible 5-5/8" Dia. Totally Enclosed Condenser Fan Motor, 1/3 HP,



460V, 1075 RPM, ReversibleFSE1018S 1/6 825 208-230 1.1 Enclosed Reversible 5-5/8" Dia. Totally Enclosed Condenser Fan Motor, 1/6 HP,

208-230V, 825 RPM, ReversibleFSE1028S 1/4 825 208-230 1.5 Enclosed Reversible 5-5/8" Dia. Totally Enclosed Condenser Fan Motor, 1/4 HP,



208-230V, 825 RPM, Reversible

Part No. BM C N T T1 Notes FEH1026S 4.74 11.24 6.50 .88 1.12 311,370,$ FEH1036S 5.24 11.74 6.50 .88 1.12 311,370,$ FEH1056S 5.61 12.11 6.50 .88 1.12 311,370,$ FEH1076Sss 6.11 12.61 6.50 .88 1.12 311,370,$ FSE1018S 4.11 10.61 6.50 .88 1.12 40,370,$ FSE1028S 4.61 11.11 6.50 .88 1.12 40,370,$ FSE1038S 5.11 11.61 6.50 .88 1.12 40,370,$ FSE1058S 5.61 12.11 6.50 .88 1.12 40,370,$

40. Four mounting holes in shell 311. 1/2” dia. shaft, single flat, 370. 48” leads $ Energy Efficient

47 HVAC Parts 47

Motors & AccessoriesCondenser Fan MotorsCentury6-1/2” DiameterJuggerNaut Inverter Duty, 56 Frame Three Phase - Electrically Reversible

Features: • Auto Protector • Quick-Connect Design • Class B or F Moisture-Resistant Insulation • Reversible • Double Sealed Ball Bearing • 5/8” Dia. Shaft with both Keyway and Flat • Three Phase • 60 Hz


Part Number HP RPM Voltage Amps Rotation DescriptionH1050A 1 1140 460/200-230 2.2/4.4-4.0 RCW JuggerNaut Inverter Duty, 56 Frame Three Phase -

Electrically, 1 HP, 460/200-230V, 1140 RPMH1051A 1-1/2 1140 460/200-230 2.9/5.8-5.8 RCW JuggerNaut Inverter Duty, 56 Frame Three Phase -

Electrically, 1-1/2 HP, 460/200-230V, 1140 RPMH1052A 2 1140 460/200-230 3.7/7.4-7.0 RCW JuggerNaut Inverter Duty, 56 Frame Three Phase -

Electrically, 2 HP, 460/200-230V, 1140 RPMH1053A 1 850 460/200-230 2.6/5.2-5.0 RCW JuggerNaut Inverter Duty, 56 Frame Three Phase -

Electrically, 1 HP, 460/200-230V, 850 RPM

Notes: 368. Inverter Duty 371. Removable 56H rigid base

Part No. BM C N Y Notes

H1053A 12.32 18.32 6.00 1.00 368,371

H1050A 10.33 16.30 6.00 1.00 368,371

H1051A 11.32 17.32 6.00 1.00 368,371

H1052A 12.32 18.32 6.00 1.00 368,371

48 HVAC Parts 48

Motors & AccessoriesCondenser Fan MotorsDiversitechMulti Horsepower Motors

Features: • The multi-horsepower motors are specially designed to cover a range of applications. • The condenser fan motors range from 1/2 to 1/5; 1/3 to 1/6 both at 1075 rpm; 1/3 to 1/6 at 825rpm. • The direct drive furnace blower motors range from 1/2 to 1/6 in both 115V and 230V and 3/4 to 1/5 in

both 115V and 230V all at 1075rpm. • These motors feature reversing plugs, extended thru bolts, 36 inch leads and are designed for 370V

capacitors. • Installs with all 48 frame mounting brackets. Specifications: • Motor Finish: Grey-green powdercoat • Rated Horsepower: 1/6, 1/5, 1/4, 1/3, 1/2, or 3/4 horsepower • Current: 1.2 to 8.1 amps at rated speed and horsepower • Run Capacitor: 370 VAC - 5 to 20 µF • Thermal Overload: Equipped with an automatic thermal overload • Mounting: Shaft up, shaft down, or belly band • Shaft Flats: One flat


Part Number HP RPM Voltage Amps Frame DescriptionWG840465 1/3 - 1/6 1075 208-230 2.8/1.5 48 Multiple Horsepower Condenser Fan Motor, 1/3 - 1/6 HP,

208-230V, 1075 RPMWG840468 1/2 - 1/5 1075 208-230 3.8/1.5 48 Multiple Horsepower Condenser Fan Motor, 1/2 - 1/5 HP,

208-230V, 1075 RPMWG840469 1/3 - 1/6 825 208-230 1.9/1.2 48 Multiple Horsepower Condenser Fan Motor, 1/3 - 1/6 HP,

208-230V, 825 RPM 3/4 1/2 1/3 1/4 1/5 1/6

Run Capacitor 370V - - 5/230V 7.5/208V

5/230V 7.5/208V

5/230V 7.5/208V

5/230V 7.5/208V

Speed - - Hi Hi Lo Lo WG840465

FLA - - 2.8A 2.0A 1.7A 1.5A

Run Capacitor 370V - 12.5/230V 10/208V

12.5/230V 10/208V

12.5/230V 10/208V

12.5/230V 10/208V -

Speed - Hi Hi Lo Lo - WG840468

FLA - 3.0A 2.5A 2.0A 1.3A -

Run Capacitor 370V - 10/230V 7.5/208V

10/230V 7.5/208V

10/230V 7.5/208V

10/230V 7.5/208V -

Speed - Hi Hi Lo Lo - WG840469

FLA - 2.1A 1.7A 1.5A 1.2A -

Motor Dimensions (Inches) Catalog No.Dia. (A) L (B)

WG840465 5.59 9.488 WG840468 5.59 10.276 WG840469 5.59 10.292

49 HVAC Parts 49

Motors & AccessoriesCondenser Fan MotorsMars5-1/2" DiameterMulti Horsepower Motors

Features: • Thru bolt or band mounting • Water slinger on shaft • Air conditioning or heat pump duty • Multi-horsepower condenser fan motors are ideal for truck stock. • Three 1075 RPM models cover 208-230 volt applications from 1/6 to 1/2 HP. • All MARS brand multi-horsepower motors feature Rheem shell mounting holes.


Part Number HP RPM Voltage Lead Lengths Enclosure Description10458 1/6 - 1/3 1075 208-230 36" TEAO 5-1/2" Dia. Multi-Horsepower Condenser Fan Motor, 1/6 -

1/3 HP, 208-230V, 1075 RPM, 36" Lead Length10459 1/8 - 1/3 825 208-230 36" TEAO 5-1/2" Dia. Multi-Horsepower Condenser Fan Motor, 1/8 -




1/3 HP, 208-230V, 825 RPM, 42" Lead Length

Dimensions: MARS

No. A B C

10458 6.50 3.82 1/2 10459 6.50 5.48 1/2 10465 5.00 4.73 1/2 10468 5.00 5.48 1/2 10469 5.00 5.48 1/2

50 HVAC Parts 50

Motors & AccessoriesCondenser Fan MotorsUS Motors5.6" DiameterPermanent Split Capacitor Condenser Fan, Totally Enclosed Air Over

Features: • 140°F (60°C) Ambient Design • Sleeve Bearings Have All Angle Thrust System • Class B Insulation • Suitable for Use With 370V Capacitors • Extended Studs • 30" Leads • Hubless Lead End • Drain Holes Both Ends • Reversible Rotation • Automatic Reset Thermal Overload Protector • Continuous Duty • Stud Mount, Without Capacitor, High Ambient (60°C) Design, All Angle Mount Applications: • Residential and commercial condenser unit fan motors to meet manufacturer's requirements.

http://www.usmotors.com/Our-Products/Catalogs-And-Literature.aspx

Part Number HP RPM Voltage Amps Enclosure Description1859 1/6 1075 208-230 1.0 TEAO Permanent Split Capacitor Condenser Fan, 5.6" Dia., 1/6 HP,

208-230V, 1075 RPM1860 1/4 1075 208-230 1.5 TEAO Permanent Split Capacitor Condenser Fan, 5.6" Dia., 1/4 HP,




208-230V, 1075 RPM1874 1/4 / 1/8 825 208-230 2.0 TENV Permanent Split Capacitor Condenser Fan, 5.6" Dia., 1/4 / 1/8

HP, 208/230V, 825 RPM1875 1/3 / 1/5 825 208-230 2.4-1.4 TEAO Permanent Split Capacitor Condenser Fan, 5.6" Dia., 1/3 / 1/5

HP, 208-230V, 825 RPM

Part Number Shaft N Shell XI Total C Shipping Weight (lbs) 1859 5.0 3.8 9.4 11 1860 5.0 4.1 9.6 12 1861 5.0 4.6 10.1 14 1862 6.0 5.3 11.9 18 1868 5.0 5.8 10.3 20 1874 6.0 4.3 10.9 13 1875 6.0 5.1 11.6 17

Notes: Note 72: Includes Q-4 holes in shell for Rheem Mount

51 HVAC Parts 51

Motors & AccessoriesCondenser Fan MotorsUS Motors5.6" DiameterRESCUE Motors Permanent Split Capacitor Condenser Fan Motors

Features: • High 158°F (70°C) Or 140°C (60°C) Ambient Designs • Automatic Reset Thermal Overload Protector • Suitable for Use With 370V Capacitors • Special Treated Rotor For Corrosion Protection • Includes Lead End Mounting Holes For Rheem or Trane Units • 48" Leads • Extended Mounting Studs • Ball Bearings • Reversible Rotation • High Efficiency Design, Continuous Duty, Air Over Applications: • Commercial and Residential Condensing Units. Can replace a range of horsepower applications and a

variety of mounting styles


Part Number HP RPM Voltage Amps Enclosure Description5462 1/3 / 1/6 1075 208/230 2.6/1.8 TEAO Rescue Motors Permanent Split Capacitor Condenser Fan, 5.6" Dia.,

Totally Enclosed Air Over, 1/3 / 1/6 HP, 208/230V, 1075 RPM5464 1/3 / 1/6 825 208/230 1.9/1.0 TEAO Rescue Motors Permanent Split Capacitor Condenser Fan, 5.6" Dia.,

Totally Enclosed Air Over, 1/3-1/6 HP, 208/230V, 825 RPM5465 1/2 / 1/5 1075 208-230 3.0/1.3 TEAO Rescue Motors Permanent Split Capacitor Condenser Fan, 5.6" Dia.,

Totally Enclosed Air Over, 1/2 / 1/5 HP, 208-230V

Notes: Note H43: Side Shell & Lead End Mounting Screws Included In carton

Part Number

Shaft N

Shell XI

Total C

Shipping Weight

(lbs) HP Speed

Tap Cap. MFD

@208V

Cap. MFD

@230V Amps

1/3 High 7.5 5 2.6 1/4 High 7.5 5 2.5 1/5 Low 7.5 5 2.0 5462 5.0 4.6 9.6 15

1/6 Low 7.5 5 1.8 1/2 High 12.5 10 3.0 1/3 High 12.5 10 2.2 1/4 Low 12.5 10 1.6 5465 5.0 5.3 10.3 19

1/5 Low 12.5 10 1.3 1/3 High 10 7.5 1.9 1/4 High 10 7.5 1.5 1/5 Low 10 7.5 1.2 5464 5.0 5.3 10.3 18

1/6 Low 10 7.5 1.0

52 HVAC Parts 52

Motors & AccessoriesDirect Drive Fan & Blower MotorsCentury3-3/8" Diameter3-in-1 Permanent Split Capacitor Motor

Features: • Easy-to-Read Connection Diagram Attached to White Lead Wire • Now! Four Studs on Each End • 40o C Ambient • Class B Insulation • 60/50 HZ • UL and CSA Recognized

http://www.centuryelectricmotor.com/Applications/ AdvanceCatalogSearch.aspx

Part Number HP RPM Voltage Amps Enclosure Description9721 1/12 - 1/20 1550 115/208-230 1.1/0.5 Open 3-in-1 Permanent Split Capacitor Motor, 1/12 - 1/20 HP,

115/208-230V, 1550 RPM

5-5/8" DiameterMasterFit Multihorsepower Replacement Motors

Features: • Energy Efficient, Different Capacitor/ Speed Combinations • Designed for 370V Capacitor (not furnished) • Permanent Split Capacitor, Ball and Sleeve Bearing • Rotation Reversible, Resilient Rings on Blower Motors • Extended Thru Bolts, Automatic Protector • Class B Insulation, Continuous Duty – Air Over • Mounts by Belly Band, Thru Bolts or Shell Holes, Rheem Mounting Holes in Shell Benefits: • Less Inventory Required, Versatile • Time Saver, Easy Installations


Part Number HP RPM Voltage Amps Enclosure DescriptionFD6000 1/2 to 1/6 1075 208-230 3.9 MAX Open 5-5/8” Dia. MasterFit Multihorsepower Direct Drive Fan & Blower

Replacement Motor, 1/2 to 1/6 HP, 208-230V, 1075 RPMFD6001 3/4 to 1/5 1075 208-230 4.0 MAX Open 5-5/8” Dia. MasterFit Multihorsepower Direct Drive Fan & Blower

Replacement Motor, 3/4 to 1/5 HP, 208-230V, 1075 RPMFDL6001 1/2 to 1/6 1075 115 7.0 MAX Open 5-5/8” Dia. MasterFit Multihorsepower Direct Drive Fan & Blower

Replacement Motor, 1/2 to 1/6 HP, 115V, 1075 RPMFDL6002 3/4 to 1/5 1075 115 9.1 MAX Open 5-5/8” Dia. MasterFit Multihorsepower Direct Drive Fan & Blower

Replacement Motor, 3/4 to 1/5 HP, 115V, 1075 RPM

53 HVAC Parts 53

Motors & AccessoriesDirect Drive Fan & Blower MotorsCentury5-5/8" DiameterMasterFit Multihorsepower Replacement Motors Speeds to Use* (Color/Approx. RPM) Stock Number HP Cooling Heating

Capacitor 370 Volts Amps

1/2 High (Black/1075) (Med-Hi (Blue/1050) or Med-Lo (Yellow/825) 10 mfd 7.0 1/3 High (Black/1120) Med-Hi (Blue/1090) or Med-Lo (Yellow/1030) 5 mfd** 6.7 1/4 Med-Hi (Blue/1125) Med-Lo (Yellow/1090) or Lo (Red/1010) 5 mfd** 4.4 1/5 Med-Lo (Yellow/1110) Lo (Red/1060) 5 mfd** 3.2

FDL6001 Sleeve Bearing

1/6 Lo (Red/1085) Lo (Red/1085) 5 mfd** 2.4 1/2 High (Black/1075) (Med-Hi (Blue/1050) or Med-Lo (Yellow/825) 10 mfd 3.9 1/3 High (Black/1120) Med-Hi (Blue/1090) or Med-Lo (Yellow/1030) 5 mfd** 3.6 1/4 Med-Hi (Blue/1125) Med-Lo (Yellow/1090) or Lo (Red/1010) 5 mfd** 2.5 1/5 Med-Lo (Yellow/1110) Lo (Red/1060) 5 mfd** 1.8

FD6000 Sleeve Bearing

1/6 Lo (Red/1085) Lo (Red/1085) 5 mfd** 1.3 3/4 High (Black/1075) Med-Hi (Blue/1080) or Med-Lo (Yellow/1010) 10 mfd 9.1 1/2 High (Black/1130) Med-Lo (Yellow/1090) or Lo (Red/1035) 10 mfd 6.6 1/3 Med-Hi (Blue/1150) Med-Lo (Yellow/1130) or Lo (Red/1100) 5 mfd** 5.5 1/4 Med-Lo (Yellow/1150) Lo (Red/1130) 5 mfd** 3.0

FD6002 Ball Bearing

1/5 Lo (Red/1140) Lo (Red/1140) 5 mfd** 2.3 3/4 High (Black/1075) Med-Hi (Blue/1080) or Med-Lo (Yellow/1010) 10 mfd 3.9 1/2 High (Black/1130) Med-Lo (Yellow/1090) or Lo (Red/1035) 10 mfd 3.6 1/3 Med-Hi (Blue/1150) Med-Lo (Yellow/1130) or Lo (Red/1100) 5 mfd** 3.0 1/4 Med-Lo (Yellow/1150) Lo (Red/1130) 5 mfd** 2.3

FD6001 Ball Bearing

1/5 Lo (Red/1140) Lo (Red/1140) 5 mfd** 2.0 Notes: *speeds to use RPM data from cold motor at nominal horsepower. Actual load will determine effective rpm **Using a 7.5 mfd/370V capacitor will result in an approximately 10%

MasterFit Pro Direct Drive Fan & Blower Motors, Open DripproofFeatures: • Energy Efficient $, Permanent Split CapacitorExtended Thru Bolts • 40° C Ambient, Class B Insulation for Blower Motors • 70° C Ambient, Class F Insulation for Condenser Fan Motors • Rheem Mounting Holes in Shell, All Purpose Capacitor Included


Part Number HP RPM Voltage Amps Shaft Length Enclosure DescriptionFD6000A 1/2 - 1/6 1075 208-230 3.9 1/2" x 5" Open MasterFit Pro Direct Drive Fan & Blower Motors, 1/2 - 1/6

HP, 208-230V, 1075 RPMFD6001A 3/4 - 1/5 1075 208-230 4.0 1/2" x 5" Open MasterFit Pro Direct Drive Fan & Blower Motors, 3/4 - 1/5

HP, 208-230V, 1075 RPMFDL6001A 1/2 - 1/6 1075 115 7.0 1/2" x 5" Open MasterFit Pro Direct Drive Fan & Blower Motors, 1/2 - 1/6

HP, 115V, 1075 RPMFDL6002A 3/4 - 1/5 1075 115 9.1 1/2" x 5" Open MasterFit Pro Direct Drive Fan & Blower Motors, 3/4 - 1/5

HP, 115V, 1075 RPMNotes: Motor is approximately 10% stronger and has higher starting torque for 1/6, 1/5, 1/4, and 1/3 HP rating with the 7.5 mfd 370 volt capacitor.

54 HVAC Parts 54

Motors & AccessoriesDirect Drive Fan & Blower MotorsUS Motors5.0" DiameterPermanent Split Capacitor Direct Drive Fan Single Shaft, Open Air Over

Features: • Reversible Unless Noted, Sleeve Bearings have All Angle Thrust System • Suitable for Use With 370V Capacitors, Continuous Duty, Air Over • 24” Line Leads unless otherwise noted • Automatic Reset Thermal Overload Protector • Connection & Capacitor Information Furnished in Nameplate Data, Stud or Hub Ring Mount (2.5") Applications: • To meet manufacturer's requirements for direct drive fan and blowers

http://www.usmotors.com/Our-Products/ Catalogs-And-Literature.aspx

Part Number HP RPM Voltage Amps Enclosure Description1127P 1/6 1050 115 3.0 Open Permanent Split Capacitor Direct Drive Fan, Single Shaft 5.0" Dia.,

1/6 HP, 115V, 1050 RPM1268 1/5 1075 115 3.4 Open Permanent Split Capacitor Direct Drive Fan, Single Shaft 5.0" Dia.,

1/5 HP, 115V, 1075 RPM

Part Number Shaft N Base XD Shell XI Total C Stud YM Shipping Weight (lbs) 1268 3.5 4.6 4.1 8.7 1 10

Note: Note 98: Class B Insulation

Permanent Split Capacitor Direct Drive Fan, Open Air OverFeatures: • Reversible Unless Noted • Sleeve Bearings have All Angle Thrust System • Suitable for Use With 370V Capacitors • Continuous Duty, Air Over • 24” Line Leads unless otherwise noted • Automatic Reset Thermal Overload Protector • Connection & Capacitor Information Furnished in Nameplate Data • Stud or Hub Ring Mount (2.5")

http://www.usmotors.com/Our-Products/CatalogsAndLiterature.aspx

Part Number HP RPM Voltage Amps Enclosure Description1390 1/4 1050 115 2.8 OAO 5" Dia., Direct Drive Blower Motor, 1/4 HP, 115V, 1075RPM1391 1/4 1050 208-230 1.5 ODP 5" Dia., Direct Drive Blower Motor, 1/4 HP, 208-230V, 1075 RPM

Shaft N

Base XD

Shell XI

Total C

Stud YM

Ship Wt. (lbs

1390 4.0 4.9 4.3 8.9 1 13 1391 4.0 4.9 4.3 8.9 1 13

Hub Rings Not Included

55 HVAC Parts 55

Motors & AccessoriesDirect Drive Fan & Blower MotorsUS Motors5.6" DiameterPermanent Split Capacitor Direct Drive Fan & Blower Motors, Open Air Over

Features: • Stud Extensions On Popular Models • Suitable for Use With 370V Capacitors • Class B Insulation • 24” Leads • Continuous Duty, Air Over • SAB Bearings Have All Angle Thrust System • Reversible Rotation • For Flex Mount, Order Catalog #44; See Page 188-189. • Automatic Reset Thermal Overload Protector • Connection and Capacitor Information Furnished In Nameplate Data • 2.5” Diameter Hub Rings Included • Hub Ring Mount (2.5") Except As Noted, Without Capacitor Applications: • Residential and commercial direct drive fans and blowers


Part Number HP RPM Voltage Amps Enclosure Description1863 1/4 1075 115 3.5 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia.,

1/4 HP, 115V, 1075 RPM1864 1/3 1075 115 5.0 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia.,

1/3 HP, 115V, 1075 RPM1865 1/2 1075 115 6.5 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia.,

1/2 HP, 115V, 1075 RPM1971 1/4 1075 208-230 1.5 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia.,

1/4 HP, 208-230V, 1075 RPM1972 1/3 1075 208-230 1.9 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia.,

1/3 HP, 208-230V, 1075 RPM1973 1/2 1075 208-230 2.9 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia.,

1/2 HP, 208-230V, 1075 RPM8904 3/4 1075 115 9.5 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia.,

3/4 HP, 115V, 1075 RPM8905 3/4 1075 208-230 4.0 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia.,

3/4 HP, 208-230V, 1075 RPM8906 1 1075 115 12.1 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia., 1

HP, 115V, 1075 RPM8907 1 1075 208-230 5.6 OAO Direct Drive Fan & Blower, Permanent Split Capacitor, 5.6" Dia., 1

HP, 208-230V, 1075 RPM

Part Number Shaft N Base XD Shell XI Total C Shipping Weight (lbs)1863 5.0 4.9 4.3 10.4 12 1864 5.0 5.1 4.6 10.7 12 1865 4.0 6.0 5.4 10.4 19 8904 4.0 6.0 5.4 10.4 19 8906 5.0 6.6 6.1 12.2 20 1971 5.0 4.9 4.3 10.4 11 1972 5.0 4.9 4.6 10.7 13 1973 5.0 5.9 5.3 11.4 19 8905 4.0 6.0 5.4 10.4 19 8907 5.0 6.6 6.1 12.2 21

Notes: Note 69: No Stud Extension Note H17: Class B Insulation, Studs Shaft Side Only, Ball Bearings

56 HVAC Parts 56

Motors & AccessoriesDirect Drive Fan & Blower MotorsUS Motors5.6" DiameterRESCUE Permanent Split Capacitor Direct Drive Fan & Blower Motors, Open Air Over

Features: • Extended Mounting Studs • Suitable for Use With 370V Capacitors • Class B Insulation • 36" Leads • High Efficiency Design • Includes Side Shell Holes For Rheem Units • Continuous Duty, Air Over • Reversible Rotation • Automatic Reset Thermal Overload Protector • 2.5" Diameter Hub Rings Included Applications: • Commercial and Residential Air Handlers and Furnaces. Can replace a range of horsepower applications

and a variety of mounting styles


Part Number HP RPM Voltage Amps Enclosure Description5460 1/2-1/6 1075 115 7.3 OPAO Rescue Motors Permanent Split Capacitor Direct Drive Fan and

Blower, 5.6" Dia., 1/2-1/6 HP, 115V, 1075 RPM5461 1/2-1/6 1075 208-230 3.6 OPAO Rescue Motors Permanent Split Capacitor Direct Drive Fan and

Blower, 5.6" Dia., 1/2-1/6 HP, 208-230V, 1075 RPM5470 3/4-1/5 1075 115 8.1 OPAO Rescue Motors Permanent Split Capacitor Direct Drive Fan and

Blower, 5.6" Dia., 3/4-1/5 HP, 115V, 1075 RPM5471 3/4-1/5 1075 208-230 4.1 OPAO Rescue Motors Permanent Split Capacitor Direct Drive Fan and

Blower, 5.6" Dia., 3/4-1/5 HP, 208-230V, 1075 RPM

Part Number

Shaft N

Base XD

Shell XI

Total C

Shipping Weight (lbs) HP Cool Speed

Tap Heat

Speed Cap. MFD Amps

1/2 High Med-Hi 12.5 7.3 1/3 High Med-Low 7.5 6.9 1/4 Med-Hi Med-Low 7.5 5.5 1/5 Med-Low Low 7.5 3.6

5460

5.0 5.4 4.8 9.8 19.74

1/6 Low Low 7.5 2.8 1/2 High Med-Hi 10 3.6 1/3 High Med-Low 5 6.9 1/4 Med-Hi Med-Low 5 5.5 1/5 Med-Low Low 5 3.6

5461

5.0 5.4 4.8 9.8 14.58

1/6 Low Low 5 2.8 3/4 High Med-Hi 20 8.1 1/2 High Med-Low 10 6.6 1/3 Med-Hi Med-Low 10 4.6 1/4 Med-Low Low 10 3.8

5470

5.0 6.6 6.1 11.6 18.13

1/5 Low Low 10 3.1 3/4 High Med-Hi 20 4.1 1/2 High Med-Low 10 3.7 1/3 Med-Hi Med-Low 10 2.5 1/4 Med-Low Low 10 1.8

5471

5.0 6.6 6.1 11.6 16

1/5 Low Low 10 1.7 Notes: Note H23: For 1/3 To 1/6 HP, if more air flow is needed, a 7.5 MFD capacitor may be used. Note H40: Screws For Shell Mounting Included In Carton

57 HVAC Parts 57

Motors & AccessoriesDirect Drive Furnace Blower MotorsDiversitechMulti Horsepower Motors

Features: • The multi-horsepower motors are specially designed to cover a range of applications. • The condenser fan motors range from 1/2 to 1/5; 1/3 to 1/6 both at 1075 rpm; 1/3 to 1/6 at 825rpm. • The direct drive furnace blower motors range from 1/2 to 1/6 in both 115V and 230V and 3/4 to 1/5 in

both 115V and 230V all at 1075rpm. • These motors feature reversing plugs, extended thru bolts, 36 inch leads and are designed for 370V

capacitors. • Installs with all 48 frame mounting brackets. Specifications: • Motor Finish: Grey-green powdercoat • Rated Horsepower: 1/6, 1/5, 1/4, 1/3, 1/2, or 3/4 horsepower • Current: 1.2 to 8.1 amps at rated speed and horsepower • Run Capacitor: 370 VAC - 5 to 20 µF • Thermal Overload: Equipped with an automatic thermal overload • Mounting: Shaft up, shaft down, or belly band • Shaft Flats: One flat


Part Number HP RPM Voltage Amps Shaft Diameter DescriptionWG840463 1/2 - 1/6 1075 115 7 1/2" Multiple Horsepower Direct Drive Furnace Blower Motor, 1/2

- 1/6 HP, 115V, 1075 RPMWG840464 1/2 - 1/6 1075 208-230 3.9 1/2" Multiple Horsepower Direct Drive Furnace Blower Motor, 1/2

- 1/6 HP, 208-230V, 1075 RPMWG840466 3/4 - 1/5 1075 115 8.1 1/2" Multiple Horsepower Direct Drive Furnace Blower Motor, 3/4

- 1/5 HP, 115V, 1075 RPMWG840467 3/4 - 1/5 1075 208-230 3.8 1/2" Multiple Horsepower Direct Drive Furnace Blower Motor, 3/4

- 1/5 HP, 208-230V, 1075 RPM 3/4 1/2 1/3 1/4 1/5 1/6

Run Capacitor 370V - 10 5/7.5 5/7.5 5/7.5 5/7.5 Speed - All All Med Hi, Med Lo, Lo Med Lo, Lo All WG840463 FLA - 7A 6.7A 4.4A 3.2A 2.4A Run Capacitor 370V - 10 5/7.5 5/7.5 5/7.5 5/7.5 Speed - All All Med Hi, Med Lo, Lo Med Lo, Lo All WG840464 FLA - 3.9A 3.6A 2.5A 1.8A 1.3A Run Capacitor 370V 20 10 10 10 10 - Speed All All Med Hi, Med Lo, Lo Med Lo, Lo Lo -

WG840466 FLA 8.1A 6.6A 4.6A 3.8A 3.1A -

Run Capacitor 370V 20 10 10 10 10 - Speed All All Med Hi, Med Lo, Lo Med Lo, Lo Lo - WG840467 FLA 3.8A 3.7A 2.5A 1.8A 1.7A -

Motor Dimensions (Inches) Part Number Dia. (A) L (B) WG840463 5.59 10.292 WG840464 5.59 10.292 WG840466 5.59 12.08 WG840467 5.59 12.08

58 HVAC Parts 58

Motors & AccessoriesDirect Drive Furnace Blower MotorsMars5-1/2" DiameterMulti Horsepower Motors

Multi-horsepower direct drive blower motors are ideal for truck stock. Four models cover both 115 volt and 208-230 volt applications from 1/6 through 3/4 HP. All MARS brand multi-horsepower motors feature Rheem shell mounting holes. Features: • 2-1/2 inch resilient rings • Reversible rotation

http://www.marsm-a.com/cgi-bin/lansaweb ?procfun+wordpr01+webfunc+ML6

Part Number HP Voltage Lead Lengths Enclosure Rotation Description10463 1/6 - 1/2 115 41.53" OAO Reversible 5-1/2" Dia. Multi-Horsepower Direct Drive Furnace Blower

Motors, 1/6 - 1/2 HP, 115V10464 1/6 - 1/2 230 41" OAO Reversible 5-1/2" Dia. Multi-Horsepower Direct Drive Furnace Blower

Motors, 1/6 - 1/2 HP, 230V10466 1/5 - 3/4 115 41" OAO Reversible 5-1/2" Dia. Multi-Horsepower Direct Drive Furnace Blower

Motors, 1/5 - 3/4 HP, 115V10467 1/5 - 3/4 230 40.75" OAO Reversible 5-1/2" Dia. Multi-Horsepower Direct Drive Furnace Blower

Motors, 1/5 - 3/4 HP, 230V

Dimensions: MARS No. A B C 10463 5.00 4.73 1/2 10464 5.00 4.73 1/2 10466 5.25 5.73 1/2 10467 5.00 5.23 1/2

ECMMarsAccessoriesECM Protector - 08552

Features: • Saves Equipment: ECM protectors plug into existing motor connectors or plugs. They help to protect

these valuable motors from voltage spikes, surges, and transients that often damage them • Fast Installation: These protectors simply plug in between the motor connector and the existing wiring

harness. A ground strap with a ring terminal is provided for additional protection • Protect Your Investment: The most common cause of ECM motor failure is damage to the electronics

module as a result of poorly conditioned incoming power.


Part Number UOM Weight (lbs) Description08552 Each 0.10 ECM Protector For GE X-13 ECM

59 HVAC Parts 59

Motors & AccessoriesECMMarsAccessoriesECM Protector - 08553

Features: • Saves Equipment: ECM protectors plug into existing motor connectors or plugs. They help to protect

these valuable motors from voltage spikes, surges, and transients that often damage them • Fast Installation: These protectors simply plug in between the motor connector and the existing wiring

harness. A ground strap with a ring terminal is provided for additional protection • Protect Your Investment: The most common cause of ECM motor failure is damage to the electronics

module as a result of poorly conditioned incoming power.


Part Number UOM Weight (lbs) Description08553 Each 0.05 ECM Protector For OEM ECM Applications

ECM Repair KitFeatures: • Repairs many ECM motor modules that have been damaged by voltage problems and power surges • Full instructions included in kit • Kit includes OCPD device and helpful circuit board releaser tool • Using the kit requires a soldering gun or iron and rosin core solder ECM’s have *Over Current Protection Devices that are designed to keep excessive power from damaging other system components. Frequently, only this part needs replacement to restore an expensive ECM to an operation condition. Not every ECM module can be repaired. Because of this, the repair kit is not guaranteed to fix every motor-but because of the motor’s high cost vs. the repair kit’s low cost- it’s often worth the effort.


Part Number UOM Weight (lbs) Description08551 Each 0.07 ECM Repair Kit, Includes Over Current Protection Device

Fan Blade & Hub Puller

http://www.marsm-a.com/cgi-bin/lansaweb ?procfun+wordpr01+webfunc+ML6

Part Number UOM Weight (lbs) Description40852 Each 3.15 Fan Blade & Hub Puller

60 HVAC Parts 60

Motors & AccessoriesEvergreenMars5-1/2" DiameterDirect Drive Blower Motors - ECM - AH

Features: • Controlled directly by 24 VAC thermostat inputs • 5 independent speed selections • System delays are emulated by programming delays and ramp rates in the motor program • Evergreen is completely isolated from the system controller board • 5 speed settings cover COOL / HEAT / Low speed CONSTANT FAN Benefits: • Energy Savings • Quiet operation • Comfort • Air quality ECM motor containing specially designed firmware to replace 208-230 Volt PSC motors currently used in air handlers and heat pumps which may have optional second stage electric heat. Applications: • HVAC 208-230V single stage and some 2 stage air handler, fan coil, and heat pumps which may have

optional electric heat Exclusions: • 115V/230V furnace fossil fuel applications • Replacement of OEM ECM motors

http://www.marsm-a.com/cgi-bin/lansaweb? procfun+wordpr01+webfunc+ML6

Part Number HP Voltage Rotation Cubes UOM Weight (lbs) Description06001 1/2 208-230 CCW 231.0000 Each 13.45 5-1/2" Dia. Direct Drive Blower Motors - ECM, 1/2 HP,

CCW Rotation06002 1/2 208-230 CW 231.0000 Each 13.35 5-1/2" Dia. Direct Drive Blower Motors - ECM, 1/2 HP, CW

Rotation

Direct Drive Blower Motors - ECM - Belly BandFeatures: • Designed by RBC for Evergreen • Tested by RBC for strength and sound • Evergreen branded accessory


Part Number UOM Weight (lbs) Description08025 Each 1.15 10” Bolt Pattern Belly Band08026 Each 1.50 11” Bolt Pattern Belly Band08027 Each 2.00 13” Bolt Pattern Belly Band

61 HVAC Parts 61

Motors & AccessoriesEvergreenMars5-1/2" DiameterDirect Drive Blower Motors - ECM - IM

It is designed to replace factory PSC blower motors in HVAC systems. Built from the same trusted, field-proven ECM technology that is found in millions of OEM systems nationwide, Evergreen uses up to 25% fewer watts in operating mode and up to 74% fewer Watts than a PSC motor in constant fan. The Evergreen IM is a great replacement for any PSC air-handler motor, adding up to 1 SEER point to an existing system. Features: • Two motors cover all applications • Multi-volt 115/230 and Reversible Rotation • Integrated with HVAC system controls/operation • Four speed selections for heating and cooling • Optimized constant fan speed • Two (2) year warranty • Reduce truck stock, no capacitors to change out or stock Applications: • Direct Drive, 115 or 230VAC Motor Systems • Clock-wise (CW) or Counter Clock-wise (CCW) rotation • Residential Split and Packaged Systems • Air Conditioning or Heat Pump Systems • Natural Gas, Propane and Oil Heat Furnaces • Dual Fuel Systems • Hot water coil and Geothermal air handlers


Part Number HP Voltage Rotation Weight Description06005 1/5, 1/4, 1/3, 1/2 115/230 Reversible 13.80 5-1/2" Dia. Direct Drive Blower Motors - ECM, 1/5, 1/4, 1/3, 1/2

HP, Reversible Rotation06010 3/4, 1 115/230 Reversible 20.35 5-1/2" Dia. Direct Drive Blower Motors - ECM, 3/4, 1 HP,

Reversible Rotation

62 HVAC Parts 62

Motors & AccessoriesFan and Blower MotorsUS MotorsSplit Phase Belted Fan and BlowerSingle Speed, Open Dripproof

Features: • Resilient Base. • Class B Insulation Unless Otherwise Noted • With Threaded Conduit Hole • Reversible Rotation. • Automatic Reset Thermal Overload Protector Applications: • To meet manufacturer's requirements for belted fans and blowers


Part Number HP RPM Voltage Amps Description8000 1/4 1725 115 5.3 Split Phase Belted Fan and Blower NEMA 48 Frame, Single and Two

Speed, 1/4 HP, 115V, 1725 RPM8100 1/3 1725 115 6.4 Split Phase Belted Fan and Blower NEMA 48 Frame, Single and Two

Speed, 1/3 HP, 115V, 1725 RPM8200 1/2 1725 115 8.0 Split Phase Belted Fan and Blower NEMA 48 Frame, Single and Two

Speed, 1/2 HP, 115V, 1725 RPM

Part Number

Shaft N

Shaft U

Total C

Shipping Weight (lbs)

8000 1.5 0.500 8.9 13 8100 1.5 0.500 9.4 15 8200 1.5 0.500 10.0 18

Notes: Note 77: With Shaft Adapter For 5/8" Shaft Note 79: Combination Mounting Holes For NEMA 48 and 56 Frame Dimensions

a

63 HVAC Parts 63

Motors & AccessoriesIndoor Blower MotorsCentury5-5/8" DiameterThree Speed - Permanent Split Capacitor - Standard Efficiency

Features: • Auto Protector • Class B Insulation • Continuous Air Over • Lead Reversible • Open Construction • Permanent Split Capacitor • 40° C Ambient • Sleeve Bearing • Standard Efficiency • 2-1/4” Rings with 2-1/2” Adapters included • 26” Leads


Part Number HP RPM Voltage Amps Hz DescriptionD1026 1/4 - 1/6 - 1/8 1075 208-230 1.8 60 5-5/8" Dia. Indoor Direct Drive Blower Motor, 1/4 - 1/6 - 1/8 HP,

208-230V, 1075 RPMD1036 1/3 - 1/4 - 1/6 1075 208-230 2.6 60 5-5/8" Dia. Indoor Direct Drive Blower Motor, 1/3 - 1/4 - 1/6 HP,

208-230V, 1075 RPMD1056 1/2 - 1/3 - 1/4 1075 208-230 3.2 60 5-5/8" Dia. Indoor Direct Drive Blower Motor, 1/2 - 1/3 - 1/4 HP,

208-230V, 1075 RPMD1076 3/4 - 1/2 - 1/3 1075 208-230 4 60 5-5/8" Dia. Indoor Direct Drive Blower Motor, 3/4 - 1/2 - 1/3 HP,

208-230V, 1075 RPMDL1026 1/4 - 1/6 - 1/8 1075 115 3.5 60 5-5/8" Dia. Indoor Direct Drive Blower Motor, 1/4 - 1/6 - 1/8 HP,

115V, 1075 RPMDL1036 1/3 - 1/4 - 1/6 1075 115 4.9 60 5-5/8" Dia. Indoor Direct Drive Blower Motor, 1/3 - 1/4 - 1/6 HP,



115V, 1075 RPM

Part No. BM R C N T NotesDL1026 4.11 4.67 4.67 4.50 0.64 D1026 4.11 4.67 4.67 4.50 0.64 DL1036 4.36 4.92 8.86 4.50 0.64 D1036 4.49 5.05 8.99 4.50 0.64 DL1056 4.99 5.55 9.49 4.50 0.64 D1056 4.86 5.42 9.36 4.50 0.64 DL1076 5.61 6.17 10.11 4.50 1.50 90 D1076 5.61 6.17 10.11 4.50 1.50 Notes: 90. 50o C Ambient **Approximately 150 RPM difference between speeds.

64 HVAC Parts 64

Motors & AccessoriesMounting AccessoriesCenturyCapacitor Mounting Kit

DimensionPart Number Bracket Cover Description1482A 2-1/8" x 1-1/4" 1-5/8" Capacitor Bracket & Cover, 2-1/8" x 1-1/4"

Direct Drive Blower Mounting KitFeatures: • Fixed Lug mount assembly for 5-1/2 inch diameter motors. • Includes grommets, ferrules and screws.


Part Number Bolt Circle Diameter Description625295 10-1/2" Direct Drive Blower Mounting Kit, 10-1/2" Bolt Circle Dia.

Fleximount AdapterAdapt standard 42 & 48 frame motors to Fleximount. Each adapter includes 3 grommets and 3 steel ferrules.

http://www.centuryelectricmotor.com/Applications/AdvanceCatalog Search.aspx

Part Number Frame Description619432-192 42 Mount Motor 42 Frame With Grommets & Ferrules6619432-174 48 Mount Motor 48 Frame With Grommets & Ferrules

Length Adapter Kit Applications: • For 5-5/8" diameter motors • For Length Adapter Bracket only, use Stock No. 1218A.


Part Number Description1329A Length Adapter Kit for 5-5/8" Dia. Motors

65 HVAC Parts 65

Motors & AccessoriesMounting AccessoriesCenturyLug Mounting Bracket

Applications: • For adapting 5-1/2" standard motors to applications that require lugs attached to motor shell.


Bolt Circle DiameterPart Number Maximum Minimum Description615157 7-3/4" 6-3/4" Lug Mounting Bracket, 6-3/4" Minimum Bolt Circle Dia.

RefrigerationUS Motors3.3" Diameter - Shaded Pole and PSC Direct Drive FanOEM Direct Replacements

Features: • Four 8-32 x 3/4" Stud Extensions At Each End • Ball Bearings Have All Angle Thrust System • Automatic Reset Thermal Overload Protector • Dual Studs • PSC Design With Capacitor Included • 12" Leads Applications: • To meet manufacturer's requirements for fans and blowers


Part Number HP RPM Voltage Enclosure Description9656 1/15 1550 208-230 OAO OEM Direct Replacements, Shaded Pole & Permanent Split

Capacitor, 1/15 HP, 208-230, 1550 RPM, CCW/Rev9662 1/20 1550 115 OAO OEM Direct Replacements, Shaded Pole & Permanent Split

Capacitor, 1/20 HP, 115V, 1550 RPM, CCW/Rev9648 1/20 1550 208-230 OAO OEM Direct Replacements, Shaded Pole & Permanent Split

Capacitor, 1/20 HP, 208-230V, 1550 RPM, CW9654 1/20 1550 115/230 TEAO OEM Direct Replacements, Shaded Pole & Permanent Split

Capacitor, 1/20 HP, 115/230V, 1550 RPM, CW

OEM Direct ReplacementsPart Number HP RPM Voltage Amps Enclosure Description1527 1/6 1550 230 2.8 ODP OEM Replacement, 1/6 HP, 230V, 1550 RPM

66 HVAC Parts 66

Motors & AccessoriesRefrigeration Condenser Fan MotorsUS Motors5.6" Diameter Permanent Split Capacitor - Refrigeration Condenser FanOEM Direct Replacements

Features: • OEM Direct Replacements • Single Speed • Automatic Reset Thermal Overload Protector • Suitable for use with 370V Capacitors Applications: • Condenser cooling fan motors to meet manufacturer's requirements for commercial refrigeration units.


Part Number HP RPM Voltage Amps Enclosure Description644 1/2 1725 208/230 2.7 OPEN Refrigeration Condenser Fan 5.6" Dia. Permanent Split Capacitor,

1/2 HP, 208/230V, 1725 RPM1645 1/6 1550 208-230 1.4 OPEN Refrigeration Condenser Fan 5.6" Dia. Permanent Split Capacitor,

1/6 HP, 208-230V, 1550 RPM1648 1/5 1075 208-230 2.0 OPEN Refrigeration Condenser Fan 5.6" Dia. Permanent Split Capacitor,

1/5 HP, 208-230V, 1075 RPM3042 1/4 1625 230 1.4 OPEN Refrigeration Condenser Fan 5.6" Dia. Permanent Split Capacitor,

1/4 HP, 208-230V, 1625 RPM7232 1/3 1625 208-230 2.9 ODP Refrigeration Condenser Fan 5.6" Dia. Permanent Split Capacitor,

1/3 HP, 208-230V, 1625 RPM

Part Number

Shaft N

Shell XI

Total C

Shipping Weight (lbs)

1645 2.1 3.8 6.4 12 1648 2.5 4.3 7.8 13 7232 3.7 4.6 9.6 16 644 3.5 5.1 8.6 15 3042 1.5 5.1 7.7 12

Notes: Note H35: Open Air Over Note H18: Conduit Box Note H36: Open Dripproof Note 64: Capacitor Included Note H4: 2-1/4" Hub Rings

67 HVAC Parts 67

HVAC Parts 69

Air ConditioningEquipment

SPRING/SUMMER 2013


Air Conditioning EquipmentsDuct FreeLGCeiling CassetteSingle Zone

Features: • Inverter (Variable speed compressor) • Internal condensate pump included • Swirl wind • 4-Way cooling • Jet cool • Cooling mode • Dehumidifying mode • Night Quiet Operation • Built-in low ambient standard, down to 14ºF (Cooling mode) • Fan mode • Independent vane control • 5 Fan speeds • Evaporator frost control • 24-Hour on-off timer • Auto restart • Auto changeover • Temperature display on remote • Ultra-quiet turbo fan • Gold Fin anti-corrosion Interior Unit Includes: • Ceiling unit • Wired control with batteries • Installation manual • Required accessory: Model name: PT-UMC (Ceiling grill sold separately) • Optional accessories • Model#: PQRCVSL0 (QW) (Wired wall thermostat) • Model name: PTPKM0 (Plasma kit) • Model#: PMNFP14A0 (PI485 V-net interface)

Exterior Unit Includes: • Sufficient refrigerant for charging indoor coil and a 25’ line set (Line set not included) • ETL#: 3091879

http://www.lghvac.com

Capacity (BTUs)Part Number Cooling Heating Dimensions (W×H×D)

(inch)Power Supply

(V/Hz/ø)Net Weight

(lbs)Description

LCN247HV 24,000 27,000 33-1/16 x 8-1/32 x 33-1/16 208-230 / 60 / 1 45.2 Ceiling-Cassette Duct Free Single Zone A/C,24,000/27,000 Btu, Indoor Model

LCU247HV 24,000 27,000 37-13/32 x 32-27/32 x 13 208-230 / 60 / 1 132.3 Ceiling-Cassette Duct Free Single Zone A/C,24,000/27,000 Btu, Outdoor Model

LCN427HV 42,000 47,000 33-1/16 x 11-11/32 x33-1/16

208-230 / 60 / 1 54.2 Ceiling-Cassette Duct Free Single Zone A/C,42,000/47,000 Btu, Indoor Model

LCU427HV 42,000 47,000 37-13/32 x 54-11/32 x 13 208-230 / 60 / 1 202.8 Ceiling-Cassette Duct Free Single Zone A/C,42,000/47,000 Btu, Outdoor Model

Note: *LG verified sound ratings

WinWholesale Inc. 3110 Kettering Blvd. Dayton, OH 45439

Phone: 937-294-5331 www.winair.com

1 Air Conditioning Equipment 1

Air Conditioning EquipmentsDuct FreeLGFlex Multi-SplitCeiling-Concealed Ducted Flex Multi-Split Indoor Units

Features: • Drain pump • Control lock function • Inverter variable-speed fan • Built-in condensate pump • Auto operation and auto restart operation • Two-thermistor control • Quiet operation Interior Unit Includes: • Ceiling unit • Wired remote control • Owner’s manual • ETL# : 3091879


Fan Air Flow RatePart Number (CMM) (H/M/L)

(CFM)Power Supply

(V/Hz/ø)Net Weight

(lbs)Description

LMDN095HV 8.5/7.5/6.5 300/265/230 208-230 / 60 / 1 45.2 (Body) Ceiling-Concealed Ducted Flex Multi-Split Indoor Units,9,000 Btuh

LMDN125HV 9.5/8.5/7.5 335/300/265 208-230 / 60 / 1 45.2 (Body) Ceiling-Concealed Ducted Flex Multi-Split Indoor Units,12,000 Btuh

LMDN185HV 15/13.5/11.5 530/477/406 208-230 / 60 / 1 58.4 (Body) Ceiling-Concealed Ducted Flex Multi-Split Indoor Units,18,000 Btuh

Note: 1. Capacities are based on the following conditions: • Cooling: - Indoor Temperature 80ºF (26.7ºC ) DB/67ºF (19.4ºC) WB and - Outdoor Temperature 95ºF (35ºC) DB/75ºF (23.9ºC) WB • Heating: - Indoor Temperature 70ºF (21.1ºC) DB/60ºF (15.6ºC) WB and - Outdoor Temperature 47ºF (8.3ºC) DB/43ºF (6.1ºC) WB • Piping Length: - Interconnecting Piping Length 24.6 ft.(7.5m) and - Level Difference of Zero 2. Wiring cable size must comply with the applicable local and national code. 3. The specification may be subject to change without prior notice for purpose of improvement.




Air Conditioning EquipmentsDuct FreeLGFlex Multi-SplitFlex Multi Heat Pump Inverter Outdoor Units

Features: • Defrost /Deicing • Restart delay (3-minutes), Self diagnosis, Soft start • Inverter (variable speed compressor) • Auto operation (Artificial intelligence) • Auto restart operation, Low ambient operation to 14ºF (cooling mode) • Gold Fin Anti-Corrosion Benefits: • Inverter variable-speed compressor on the outdoor unit for energy-saving operation • Defrost / De-icing capabilities,restart delay of three minutes • Self diagnosis capabilities • Soft start reduces power surges to electrical systems • Auto operation and auto restart operation • Operates down to 14°F in cooling mode • R410A refrigerant Exterior Unit Includes: • Exterior unit • Sufficient refrigerant for charging 2, 3 or 4 indoor coils


Operation RangePart Number Cooling

(°F) Heating

(°F)Power Supply

(V/Hz/ø)Net Weight

(lbs)Description

LMU187HV 14 ~ 114.8 5 ~ 75.2 208-230 / 60 / 1 123.5 Flex Multi-Split Heat Pump Inverter Outdoor Units, 18,000 BtuhLMU247HV 14 ~ 114.8 5 ~ 75.2 208-230 / 60 / 1 130.1 Flex Multi-Split Heat Pump Inverter Outdoor Units, 24,000 BtuhLMU369HV 14 ~ 114.8 5 ~ 75.2 208-230 / 60 / 1 209.4 Flex Multi-Split Heat Pump Inverter Outdoor Units, 34,000 BtuhLMU540HV 14 ~ 118.4 0 ~ 64.4 208-230 / 60 / 1 213.8 Flex Multi-Split Heat Pump Inverter Outdoor Units, 54,000 BtuhSpecification: Model LMU247HV LMU187HV LMU369HV LMU540HV Refrigerant Charge (at 24.6 ft.) 74.1 oz 67 oz 123.5 oz 155.2 oz Refrigerant Control EEV EEV EEV EEV Max. # of Connectable Indoor Units 3 2 4 8 Power Supply Cable (Outdoor) No. x AWG 3 x 12 3 x 14 3 x 12 3 x 10 Transmission Cable (Outdoor to Indoor unit) No. x AWG 4 x 18 4 x 18 4 x 18 4 x 16 Piping Connections: Liquid (inch) 1/4 x 3EA 1/4 x 2EA 1/4 x 4EA 3/8 x 1EA Piping Connections: Gas (inch) 3/8 x 3EA 3/8 x 2EA 3/8 x 4EA 3/8 x 1EA Max. total piping (ft.) 246.1 164 246.1 475.7 Max. OD~ID piping (ft.) 82 82 82 229.6 Piping length(no additional refrigerant) ft. 73.8 49.2 98.4 147.6 Max. Elevation Difference: Outdoor Unit-Indoor Unit (ft) 49.2 49.2 49.2 98.4 Max. Elevation Difference: Indoor Unit-Indoor Unit (ft) 24.6 24.6 24.6 49.2

Note: 1. Capacities are based on the following conditions:

• Cooling: - Indoor Temperature 80ºF (26.7ºC ) DB/67ºF (19.4ºC) WB, • - Outdoor Temperature 95ºF (35ºC) DB/75ºF (23.9ºC) WB • Heating: - Indoor Temperature 70ºF (21.1ºC) DB/60ºF (15.6ºC) WB, • - Outdoor Temperature 47ºF (8.3ºC) DB/43ºF (6.1ºC) WB • Piping Length: - Interconnecting Piping Length 24.6 ft.(7.5m), - Level Difference of Zero

2. Wiring cable size must comply with the applicable local and national code. 3. The specification may be subject to change without prior notice for purpose of improvement. 4. The data mentioned in the above table are only for non-ducted type of indoor unit. 5. The data mentioned in the above table is only for non-ducted type indoor units.




Air Conditioning EquipmentsDuct FreeLGFlex Multi-SplitFour-Way Ceiling-Concealed Cassette Flex Multi-Split Indoor Units

Features: • Drain pump • Control lock function • 24-Hour on/off timer • 2 thermistor control • Plasma air purifying system • Inverter variable-speed fan • Built-in condensate pump • Auto operation and auto restart operation • Two-thermistor control • Jet Cool operates at high fan speeds for 30 minutes to quickly cool a room • Built-in air purifying system • Quiet operation Interior Unit Includes: • Ceiling unit • Wireless LCD remote control, batteries, Wireless LCD remote control, batteries, holder & holder

hardware • Owner’s manual • Accessory: • Model name : PT-UQC (Ceiling grill sold separately) • Model name : PTPKQ0 (Plasma kit sold separately) • ETL# : 3091879


Fan Air Flow RatePart Number (CMM) (H/M/L) (CFM) Power Supply (V/Hz/ø) Net Weight (lbs) DescriptionLMCN125HV 9.5/8/7 335/282/247 208-230 / 60 / 1 30.9 (Body) Four-Way Ceiling-Concealed Cassette Flex

Multi-Split Indoor Units, 12,000 BtuhLMCN185HV 13/12/11 459/424/388 208-230 / 60 / 1 33.1 (Body) Four-Way Ceiling-Concealed Cassette Flex

Multi-Split Indoor Units, 18,000 BtuhNote: 1. Capacities are based on the following conditions: • Cooling: - Indoor Temperature 80ºF (26.7ºC ) DB/67ºF (19.4ºC) WB and - Outdoor Temperature 95ºF (35ºC) DB/75ºF (23.9ºC) WB • Heating: - Indoor Temperature 70ºF (21.1ºC) DB/60ºF (15.6ºC) WB and - Outdoor Temperature 47ºF (8.3ºC) DB/43ºF (6.1ºC) WB • Piping Length: - Interconnecting Piping Length 24.6 ft.(7.5m) and - Level Difference of Zero 2. Wiring cable size must comply with the applicable local and national code. 3. The specification may be subject to change without prior notice for purpose of improvement.




Air Conditioning EquipmentsDuct FreeLGFlex Multi-SplitStandard Flex Multi-Split Indoor Units

Features: • 24-Hour on/off timer • 4-Way Auto Swing • Plasma air purifying system • Inverter variable-speed fan • Self-cleaning coils for easier maintenance • Auto operation and auto restart operation • Four-way Auto Swing feature • Chaos Wind electronically controls fan speeds to create a more natural flow of air; Jet Cool / Jet

Heat operates at high fan speeds for 30 minutes to quickly cool / heat a room • Sleep mode automatically increases the temperature setting by 2 degrees twice, and shuts the

indoor unit off after designated time is reached • Built-in air purifying system • Quiet indoor unit operation Interior Unit Includes: • Wall unit • Installation plate & hardware • Wireless LCD remote control, batteries, holder & holder hardware • Owner’s manual • Wired controller available, Sold separately ETL# : 3091879


Fan Air Flow RatePart Number Capacity (BTU/h) (CMM) (H/M/L) (CFM) Net Weight (lbs) DescriptionLMN096HVT 9,000 7.0/6.5/6.0 247/230/212 22.1 (Body) Standard Flex Multi-Split Indoor Units, 9,000 BtuhLMN126HVT 12,000 9.5/9.0/8.5 335/318/300 22.1 (Body) Standard Flex Multi-Split Indoor Units, 12,000 BtuhLMN186HVT 18,000 16.2/14.2/12.3 572/501/434 32 (Body) Standard Flex Multi-Split Indoor Units, 18,000 BtuhNote: 1. Capacities are based on the following conditions: • Cooling: - Indoor Temperature 80ºF (26.7ºC ) DB/67ºF (19.4ºC) WB and - Outdoor Temperature 95ºF (35ºC) DB/75ºF (23.9ºC) WB • Heating: - Indoor Temperature 70ºF (21.1ºC) DB/60ºF (15.6ºC) WB and - Outdoor Temperature 47ºF (8.3ºC) DB/43ºF (6.1ºC) WB • Piping Length: - Interconnecting Piping Length 24.6 ft.(7.5m) and - Level Difference of Zero 2. Wiring cable size must comply with the applicable local and national code. 3. The specification may be subject to change without prior notice for purpose of improvement.




Air Conditioning EquipmentsDuct FreeLGMini-Split Art Cool - Art Cool Mirror

Features: • Energy saving • Gold Fin Anti-corrosion • Chaos Wind, 4-Way Auto Swing, Sleep mode • Dehumidifying mode • Auto restart, Auto Changeover • Built-in low ambient standard, down to 14ºF (cooling mode) • 24-Hour on/off timer, Plasma air purifying system Benefits: • Inverter variable-speed compressor on the outdoor unit for energy-saving operation • Many modes included, controlled through wireless remote: Cooling, Heating, Dehumidifying,

Fan, Auto, Auto Sleep, Defrost • Jet Cool / Jet Heat operates at high fan speeds for 30 minutes to quickly cool / heat down a

room • Self-cleaning coils in the indoor unit for easier maintenance • Operates down to 14°F in cooling mode • Ultra quiet operation on the indoor unit • Allows refrigerant piping lengths up to 65 or 98 feet, and elevation difference of 32 or 49 feet

(depending on the model) • R410A refrigerant Interior Unit Includes: • Wall unit • Installation plate & hardware • Remote control, batteries, holder & holder hardware • Installation manual • Accessory: Wired Wall Thermostat Model #: PQRCVSL0 (Black Trim) or PQRCVSl0QW (White

Trim) • Exterior Unit Includes: • Exterior unit • ETL#: 3091879


Capacity (BTUs)Part Number

Cooling

HeatingPower Supply

(V/Hz/ø)Net

Weight(lbs)

Description

LAN090HSV2 9,000 10,800 208-230 / 60 / 1 24.3 Mini-Split Duct Free Art Cool Mirror, 9,000/10,800 Btu, Indoor ModelLAU090HSV2 9,000 10,800 208-230 / 60 / 1 77.2 Mini-Split Duct Free Art Cool Mirror, 9,000/10,800 Btu, Outdoor ModelLAN120HSV2 11,200 13,300 208-230 / 60 / 1 24.3 Mini-Split Duct Free Art Cool Mirror, 11,200/13,300 Btu, Indoor ModelLAU120HSV2 11,200 13,300 208-230 / 60 / 1 77.2 Mini-Split Duct Free Art Cool Mirror, 11,200/13,300 Btu, Outdoor ModelLAN180HSV2 18,200 22,000 208-230 / 60 / 1 37.5 Mini-Split Duct Free Art Cool Mirror, 18,200/22,000 Btu, Indoor ModelLAU180HSV2 18,200 22,000 208-230 / 60 / 1 132.3 Mini-Split Duct Free Art Cool Mirror, 18,200/22,000 Btu, Outdoor ModelLAN240HSV2 22,000 27,600 208-230 / 60 / 1 37.5 Mini-Split Duct Free Art Cool Mirror, 22,000/27,600 Btu, Indoor ModelLAU240HSV2 22,000 27,600 208-230 / 60 / 1 132.3 Mini-Split Duct Free Art Cool Mirror, 22,000/27,600 Btu, Outdoor ModelNote: *LG verified sound ratings




Air Conditioning EquipmentsDuct FreeLGMini-Split Art Cool - Art Cool PremierFeatures:• Inverter (Variable speed compressor) • Energy saving, R410A Refrigerant • Gold Fin Anti-corrosion, Self-cleaning indoor coil • Cooling/Heating/Fan mode, Jet cool/Jet heat • Chaos Wind, 4-Way Auto Swing • Ultra quiet operation, Sleep mode • Dehumidifying mode,Auto restart • Auto Changeover,Built-in low ambient standard, down to 14ºF (cooling mode) • 24-Hour on/off timer, Condensate sensor connection Benefits: • Heating and Cooling • Revolutionary Inverter Technology • Larger Cross-Flow Fan & Enhanced Outlet - Increases Airflow by 29% • 4-Way Swing Disperses Air Quickly • Ultra quiet, Stylish design • Quick and easy to install, Up to 28 SEER • Five-year warranty on parts; seven-year warranty on compressors Interior Unit Includes: • Wall unit, Installation plate & hardware • Remote control, batteries, holder & holder hardware • Installation manual, Optional Accessories• Accessory: Wired Wall Thermostat Model #: PQRCVSL0 (Black Trim) or PQRCVSl0QW (White Trim)• Model#:PMNFP14A0 (PI485 V-net Interface)Exterior Unit Includes: • Exterior unit • ETL#: 3091879


Model LS090HYV

Capacity (BTUs) Operating Range:Part Number Cooling Heating Cooling (°F DB) Heating (°F DB) Net Weight

(lbs)Description

LSN090HYV 9,000 11,000 64-90 61-86 25.3 Mini-Split Duct Free Art Cool Premier, 9,000/11,000Btu, Indoor Model

LSU090HYV 9,000 11,000 14-118 5-75 94.8 Mini-Split Duct Free Art Cool Premier, 9,000/11,000Btu, Outdoor Model




Air Conditioning EquipmentsDuct FreeLGMini-Split Art Cool - Art Cool PremierModel LS090HYV

Unit Data: Refrigerant Type R410A Refrigerant Control EEV Refrigerant Charge (lbs) 2.76 ODU Sound Pressure (Max) ±3 dB(A)³ 51 IDU Sound Pressure (H/M/L/Sleep)±3 dB(A)³ 39/34/26/17 ODU Net Unit Weight (lbs) 95 ODU Shipping Weight (lbs) 100 IDU Net Unit Weight 26 IDU Shipping Weight (lbs) 29 Heat Exchanger Coating Gold Fin Communication Cable (No x AWG)? 4x 18

Electrical:Outdoor Unit:

Power Supply (V¹/Hz/Ø) 208-230/60/1

MOP(A) 15.0 MCA (A) 10.0 Cooling Rated Amps (A) 8.24 Heating Rated Amps (A) 8.64 Compressor (A) 7.6 Fan Motor (A) 1.04

Indoor Unit: Power Supply (V¹/Hz/Ø) 208-230/60/1 Cooling Power Input (kW) 0.55 Heating Power Input (kW) 0.74

Fan: ODU Type Propeller IDU Type Cross Flow Fan Speeds (Fan/Cooling/Heating) 5/6/6 Quantity (ODU+ IDU) 1+ 1

Motor/Drive Brushless Digitally Controlled/Direct

ODU Max Air Flow Rate (CFM) 1,165 IDU Air Flow H/M/L(CFM) 512/406/300 Dehumidification (pts/hr) 3.3

Piping: Liquid Line (in, OD) 1/4

Vapor Line (in, OD) 3/8 Additional Refrigerant (oz/ft) 0.22 Max Pipe Length(ft)² 49 Piping Length(no additional refrigerant, ft) 41

Max Elevation (ft) 33

Notes: 1. Acceptable operating voltage: 187V - 253V. 2. Piping lengths are equivalent. 3. Sound Pressure levels are tested in an anechoic chamber under ISO Standard 1996. 4. All communication cable to be minimum 18 American wire gage (AWG), 2-conductor, stranded, shielded and must comply with applicable local and national code. 5. See Engineering Manual for sensible and latent capacities. 6. Power wiring cable size must comply with the applicable local and national code. 7. The indoor unit comes with a dry helium charge. 8. This data is rated 0 ft above sea level, with 24.6 ft of refrigerant line and a 0 ft level difference between outdoor and indoor units.’ 9. Must follow installation instructions in the applicable LG installation manual

*LG verified sound ratings




Air Conditioning EquipmentsDuct FreeLGMini-Split Art Cool - Art Cool PremierModel LS120HYV

Capacity (BTUs) Operating Range: Part Number Cooling Heating Cooling (°F DB) Heating (°F DB) Net Weight (lbs) DescriptionLSN120HYV 12,000 13,600 64-90 61-86 25.3 Mini-Split Duct Free Art Cool Premier,

12,000/13,600 Btu, Indoor ModelLSU120HYV 12,000 13,600 14-118 5-75 94.8 Mini-Split Duct Free Art Cool Premier,

12,000/13,600 Btu, Outdoor ModelUnit Data: Refrigerant Type R410A Refrigerant Control EEV Refrigerant Charge (lbs) 2.76 ODU Sound Pressure (Max) ±3 dB(A)³ 51 IDU Sound Pressure (H/M/L/Sleep)±3 dB(A)³ 39/34/26/17

ODU Net Unit Weight (lbs) 95 ODU Shipping Weight (lbs) 100 IDU Net Unit Weight 26 IDU Shipping Weight (lbs) 29 Heat Exchanger Coating Gold Fin Communication Cable (No x AWG)4 4x 18





Fan: ODU Type Propeller IDU Type Cross Flow Fan Speeds (Fan/Cooling/Heating) 5/6/6

Quantity (ODU+ IDU) 1+ 1






Notes: 1. Acceptable operating voltage: 187V - 253V. 2. Piping lengths are equivalent. 3. Sound Pressure levels are tested in an anechoic chamber under ISO Standard 1996. 4. All communication cable to be minimum 18 American wire gage (AWG), 2-conductor, stranded, shielded and must comply with applicable local and national code. 5. See Engineering Manual for sensible and latent capacities. 6. Power wiring cable size must comply with the applicable local and national code. 7. The indoor unit comes with a dry helium charge. 8. This data is rated 0 ft above sea level, with 24.6 ft of refrigerant line and a 0 ft level difference between outdoor and indoor units., 9. Must follow installation instructions in the applicable LG installation manual *LG verified sound ratings




Air Conditioning EquipmentsDuct FreeLGMini-Split Standard - High Efficiency Single Zone InverterFeatures:• Inverter (Variable speed compressor) • Energy saving, R410A Refrigerant • Gold Fin Anti-corrosion, Self-cleaning indoor coil • Cooling/Heating/Fan mode, Jet cool/Jet heat • Chaos Wind, 4-Way Auto Swing • Ultra quiet operation, Sleep mode • Dehumidifying mode, Auto restart • Auto Changeover • Built-in low ambient standard, down to 14ºF (cooling mode) • 24-Hour on/off timer, Condensate sensor connection • Plasma air purifying system Benefits: • Inverter variable-speed compressor in the outdoor unit for energy-saving operation • Self-cleaning coils in the indoor unit for easier maintenance • Many modes included, controlled through wireless remote: Cooling, Heating, Dehumidifying, Fan, Auto, Auto Sleep, Defrost, Four-

way Auto Swing feature • Chaos Wind electronically controls fan speeds to create a more natural flow of air; Jet Cool / Jet Heat operates at high fan speeds

for 30 minutes to quickly cool / heat down a room, Operates down to 14°F in cooling mode Interior Unit Includes: • Wall unit • Installation plate & hardware, Remote control, batteries, holder & holder hardware • Installation manual, Accessory, Model#:PQRCVSL0(QW) (Wired Wall thermostat)• Model#:ZLABGP01A (Low ambiant wind baffle kit - cooling down to 0ºF)Exterior Unit Includes: • Exterior unit • Each system is pre-charged with enough refrigerant to charge 25 ft. (41 ft. for LA090HSV2, LA120HSV2, LS091HSV2,

LS121HSV2) of line and the interior unit.• ETL#: 3091879


Model-LS091HSV2

Capacity (BTUs) Operating Range:Part Number Cooling Heating Cooling (°F DB) Heating (°F DB) Net Weight

(lbs)Description

LSN091HSV2 9,000 10,800 64-86 60-86 22.1 Mini-Split Duct Free High-Efficiency Single ZoneInverter, 9,000/10,800 Btu, Indoor Model

LSU091HSV2 9,000 10,800 14-118 5-75 77.2 Mini-Split Duct Free High-Efficiency Single ZoneInverter, 9,000/10,800 Btu, Outdoor Model




Air Conditioning EquipmentsDuct FreeLGMini-Split Standard - High Efficiency Single Zone InverterModel-LS091HSV2Unit Data: Refrigerant Type R410A Refrigerant Control EEV Refrigerant Charge (lbs) 2.21 ODU Sound Pressure (±3 dB(A))² 45 IDU Sound Pressure (±3 dB(A))² 38/33/24 ODU Net Unit Weight (lbs) 77.2 ODU Shipping Weight (lbs) 81.6 IDU Net Unit Weight 22.1 IDU Shipping Weight (lbs) 26.5 Heat Exchanger Coating Gold Fin Communication Cable (No x AWG)³ 4 x 18

Fan: ODU Type Propeller IDU Type Cross Flow Fan Speeds Fan/Cooling/Heating) 6/Auto/Chaos Quantity (ODU+ IDU) 1+ 1








Vapor Line (in, OD) 3/8 Additional Refrigerant (oz/ft) 0.22

Max Pipe Length(ft)² 65 Piping Length(no additional refrigerant, ft) 41


Notes: 1. Piping lengths are equivalent. 2. Sound Pressure levels are tested in an anechoic chamber under ISO Standard 1996. 3. All communication cable to be minimum 18 AWG, 2-conductor, stranded, shielded and must comply with applicable local

and national code. 4. See Engineering Manual for sensible and latent capacities. 5. Power wiring cable size must comply with the applicable local and national code. 6. The indoor unit comes with a dry helium charge. 7. This data is rated 0 ft above sea level, with 24.6 ft of refrigerant line and a 0 ft level difference between outdoor and

indoor units. 8. Must follow installation instructions in the applicable LG installation manual. *LG verified sound ratings




Air Conditioning EquipmentsDuct FreeLGMini-Split Standard - High Efficiency Single Zone InverterModel-LS121HSV2

Capacity (BTUs) Operating Range: Part Number Cooling Heating Cooling (°F DB) Heating (°F DB) Net Weight

(lbs)Description

LSN121HSV2 11,200 13,300 64-86 60-86 22.1 Mini-Split Duct Free High-Efficiency Single ZoneInverter, 11,200/13,300 Btu, Indoor Model

LSU121HSV2 11,200 13,300 14-118 5-75 81.6 Mini-Split Duct Free High-Efficiency Single ZoneInverter, 11,200/13,300 Btu, Outdoor Model

Unit Data: Refrigerant Type R410A Refrigerant Control EEV Refrigerant Charge (lbs) 2.21 ODU Sound Pressure (±3 dB(A))² 45 IDU Sound Pressure (±3 dB(A))² 39/33/24 ODU Net Unit Weight (lbs) 77.2 ODU Shipping Weight (lbs) 81.6 IDU Net Unit Weight 22.1 IDU Shipping Weight (lbs) 26.5 Heat Exchanger Coating Gold Fin Communication Cable (No x AWG)³ 4 x 18

Electrical: Outdoor Unit:




Fan: ODU Type Propeller IDU Type Cross Flow Fan Speeds (Fan/Cooling/Heating) 6/Auto/Chaos Quantity (ODU+ IDU) 1+ 1






Notes: 1. Piping lengths are equivalent.. 2. Sound Pressure levels are tested in an anechoic chamber under ISO Standard 1996. 3. All communication cable to be minimum 18 AWG, 2-conductor, stranded, shielded and must comply with applicable local and national code., 4. See Engineering Manual for sensible and latent capacities. 5. Power wiring cable size must comply with the applicable local and national code. 6. The indoor unit comes with a dry helium charge. 7. This data is rated 0 ft above sea level, with 24.6 ft of refrigerant line and a 0 ft level difference between outdoor and indoor units. 8. Must follow installation instructions in the applicable LG installation manual. *LG verified sound ratings





Capacity (BTUs) Operating Range:Part Number Cooling Heating Cooling

(°F DB) Heating(°F DB)

Net Weight(lbs)

Description

LSN181HSV2 18,200 22,000 64-86 60-86 30.9 Mini-Split Duct Free High-Efficiency Single Zone Inverter,18,200/22,000 Btu, Indoor Model

LSU181HSV2 18,200 22,000 14-118 5-75 132.3 Mini-Split Duct Free High-Efficiency Single Zone Inverter,18,200/22,000 Btu, Outdoor Model

Unit Data: Refrigerant Type R410A Refrigerant Control EEV Refrigerant Charge (lbs) 3.97 ODU Sound Pressure (±3 dB(A))³ 53 IDU Sound Pressure (±3 dB(A))³ 45/40/35 ODU Net Unit Weight (lbs) 132.3 ODU Shipping Weight (lbs) 141.1 IDU Net Unit Weight 30.9 IDU Shipping Weight (lbs) 40.1 Heat Exchanger Coating Gold Fin Communication Cable (No x AWG) 4 x 18

Fan: ODU Type Propeller IDU Type Cross Flow Fan Speeds (Fan/Cooling/Heating) 6/Auto/Chaos Quantity (ODU+ IDU) 1 + 1





MOP(A) 30 MCA (A) 19.0 Cooling Rated Amps (A) 15.4 Heating Rated Amps (A) 15.4 Compressor (A) 14.6 Fan Motor (A) 0.25



Vapor Line (in, OD) 5/8 Additional Refrigerant (oz/ft) 0.38 Max Pipe Length(ft)² 98 Piping Length(no additional refrigerant, ft) 25 Max Elevation (ft) 49

Notes: 1. Acceptable operating voltage: 187V-253V., 2. Piping lengths are equivalent. 3. Sound Pressure levels are tested in an anechoic chamber under ISO Standard 1996. 4. All communication cable to be minimum 18 AWG, 2-conductor, stranded, shielded and must comply with applicable local

and national code. 5 See Engineering Manual for sensible and latent capacities. 6. Power wiring cable size must comply with the applicable local and national code. 7. The indoor unit comes with a dry helium charge. 8. This data is rated 0 ft above sea level, with 24.6 ft of refrigerant line and a 0 ft level difference between outdoor and






Capacity (BTUs) Operating Range:Part Number Cooling Heating Cooling

(°F DB) Heating(°F DB)

Net Weight(lbs)

Description

LSN240HSV2 22,000 27,600 64-86 60-86 33.1 Mini-Split Duct Free High-Efficiency Single Zone Inverter,22,000/27,600 Btu, Indoor Model

LSU240HSV2 22,000 27,600 14-118 5-75 141.1 Mini-Split Duct Free High-Efficiency Single Zone Inverter,22,000/27,600 Btu, Outdoor Model

Unit Data: Refrigerant Type R410A Refrigerant Control EEV Refrigerant Charge (lbs) 4.41 ODU Sound Pressure (±3 dB(A))³ 54 IDU Sound Pressure (±3 dB(A))³ 46/43/39 ODU Net Unit Weight (lbs) 141.1 ODU Shipping Weight (lbs) 152.1 IDU Net Unit Weight 33.1 IDU Shipping Weight (lbs) 44.1 Heat Exchanger Coating Gold Fin Communication Cable (No x AWG)4 4 x 18

Fan: ODU Type Propeller IDU Type Cross Flow Fan Speeds (Fan/Cooling/Heating) 4/Auto/Chaos Quantity (ODU+ IDU) 1 + 1





MOP(A) 30 MCA (A) 19.0 Cooling Rated Amps (A) 15.4 Heating Rated Amps (A) 15.4 Compressor (A) 14.6 Fan Motor (A) 0.75



Vapor Line (in, OD) 5/8 Additional Refrigerant (oz/ft) 0.38 Max Pipe Length(ft)² 98 Piping Length(no additional refrigerant, ft) 25 Max Elevation (ft) 49

Notes: 1. Acceptable operating voltage: 187V-253V. 2. Piping lengths are equivalent. 3. Sound Pressure levels are tested in an anechoic chamber under ISO Standard 1996. 4. All communication cable to be minimum 18 AWG, 2-conductor, stranded, shielded and must comply with applicable local

and national code., 5. See Engineering Manual for sensible and latent capacities. 6. Power wiring cable size must comply with the applicable local and national code. 7. The indoor unit comes with a dry helium charge. 8. This data is rated 0 ft above sea level, with 24.6 ft of refrigerant line and a 0 ft level difference between outdoor and





Air Conditioning EquipmentsDuct FreeLGMini-Split Standard - Standard Single Zone Inverter

Features: • Gold Fin Anti-Corrosion • Auto changeover, Auto sleep mode • Dehumidifying mode, Auto restart • 24-Hour on/off timer • Built-in low ambient standard, down to 14ºF (cooling mode) • Manual power switch • Defrost control • Evaporator frost control • Energy Saving • 4 Fan speeds • Plasma air purifying system • Condensate sensor connection Benefits: • Inverter variable-speed compressor in the outdoor unit for energy-saving operation • Self-cleaning coils in the indoor unit for easier maintenance • Many modes included, controlled through wireless remote: Cooling, Heating,

Dehumidifying, Fan, Auto, Auto Sleep, Defrost • Temperature display on indoor unit • Chaos Wind electronically controls fan speeds to create a more natural flow of air; Jet

Cool operates at high fan speeds for 30 minutes to quickly cool down a room • Operates down to 14°F in cooling mode • Ultra quiet indoor unit operation • Allows refrigerant piping lengths up to 98 feet, and elevation difference of 49 feet • R410A refrigerant Interior Unit Includes: • Wall unit • Installation plate & hardware • Remote control, batteries, holder & holder hardware • Installation manual • Optional Accessory • Model#:PQRCVSL0(QW) (Wired Wall thermostat) • Model#:ZLABGP02A (Low ambiant wind baffle kit - cooling down to 0ºF) Exterior Unit Includes: • Exterior unit • Exterior unit has sufficient refrigerant for charging indoor coil and a 41’ line set (line set

not included) • ETL#: 3091879


Capacity (BTUs)Part Number Cooling Heating EER HSPF Power Supply (V/Hz/ø) Net Weight (lbs) DescriptionLSN307HV2 30,000 32,000 10 9.5 208-230 / 60 / 1 34 Mini-Split Duct Free Standard Single Zone Inverter,

30,000/32,000 Btu, Indoor ModelLSU307HV2 30,000 32,000 10 9.5 208-230 / 60 / 1 142 Mini-Split Duct Free Standard Single Zone Inverter,

30,000/32,000 Btu, Outdoor ModelLSN360HV2 33,000 35,200 8.2 9.9 208-230 / 60 / 1 34 Mini-Split Duct Free Standard Single Zone Inverter,

33,100/35,200 Btu, Indoor ModelLSU360HV2 33,000 35,200 8.2 9.9 208-230 / 60 / 1 142 Mini-Split Duct Free Standard Single Zone Inverter,

33,100/35,200 Btu, Outdoor ModelNote: *LG verified sound ratings




Air Conditioning EquipmentsDuct FreeLGMini-Split Standard - Standard Single Zone InverterWired Wall Thermostat

Part Number DescriptionPQRCVSL0 / PQRCVSL0QW Wired Wall Thermostat For Single Zone Inverter, Applicable to LS307HV2,

LS360HV2, LXXXXHSV2 and LSXXXHYV models only

Multi Flex Art CoolMirror Wall Mount Indoor Units

Features: • Inverter (Variable speed fan) • Chaos swing • Jet cool/Jet Heat • Self-cleaning indoor coil • Auto operation • Auto restart operation • 24-Hour on-off timer • Plasma air purifying system Interior Unit Includes: • Wall unit • Installation plate & hardware • Wireless LCD remote control, batteries, holder & holder hardware • Owner’s manual • Wired thermostat available, sold separately • ETL#: 3091879


Part Number Capacity(BTU/h)

Dimensions (W×H×D)(inch)

Refrigerant Power Supply(V/Hz/ø)

Net Weight(lbs)

Description

LMAN096HVT 9,000 35-1/4 x 11-3/8 x8-1/16 (Body)

R-410A 208-230 / 60 / 1 24.3 (Body) Multi Flex Art Cool Mirror Wall Mount IndoorUnits, 9,000 Class

LMAN126HVT 12,000 35-1/4 x 11-3/8 x8-1/16 (Body)


LMAN186HVT 18,000 40-9/16 x 12-25/32 x9-21/32 (Body)


Note: 1. Capacities are based on the following conditions: Cooling: Indoor Temperature 80ºF (26.7ºC) DB/67ºF (19.4ºC) WB Outdoor Temperature 95ºF (35ºC) DB/75ºF (23.9ºC) WB Heating: Indoor Temperature 70ºF (21.1ºC) DB/60ºF (15.6ºC) WB Outdoor Temperature 47ºF (8.3ºC) DB/43ºF (6.1ºC) WB Piping Length: Interconnecting Piping Length 24.6 ft.(7.5m) Level Difference of Zero 2. Wiring cable size must comply with applicable local and national codes. 3. The specification may be subject to change without prior notice for purpose of improvement. *LG verified sounds ratings




Air Conditioning EquipmentsDuct FreeLGMulti Split Air ConditionersDistribution Box, 2-Port

Features: • Distributes refrigerant to indoor units • Internal components are insulated • Flare joints provided for easy installation • Compact design

http://www.lg.com/us/air-conditioners

Part Number Current (A) Power Consumption (W) Weight (kg) DescriptionPMBD3620 0.05 10 4.8 2 Port Branch Distribution Unit (BD Unit)

Specifications: Max Port Capacity Btu/h (each port) 24,000 Max Unit Capacity Btu/h (sum of ports) 72,000 Piping Connection to Outdoor Unit: Liquid Line (in, OD) 3/8 Piping Connection to Outdoor Unit: Vapor Line (in, OD) 3/4 Piping Connection to Indoor Unit: Liquid Line (in, OD) 1/4 (Qty 2) Piping Connection to Indoor Unit: Vapor Line (in, OD) 3/8 (Qty 2) Communication Cable to IDUs² (No x AWG) 4 x 18 Communication Cable to ODUs² (No x AWG) 4 x 16

Notes: • Acceptable operating voltage: 187V-253V. • All communication cable to be minimum 18 AWG, 2-conductor, stranded, shielded and must comply with applicable local

and national code. • Piping lengths: • Maximum height difference between BD unit and indoor units- 32.8 ft • Maximum height difference between BD unit and BD unit- 49.2ft • Maximum piping length between BD unit and indoor units- 49.2ft • The BD unit should be installed inside of a building. • Must follow installation instructions in the applicable LG installation manual. • Power wiring cable size must comply with the applicable local and national code.







Part Number Current (A) Power Consumption (W) Weight (kg) DescriptionPMBD3630 0.05 10 4.9 3 Port Branch Distribution Unit (BD Unit)










Part Number Current (A) Power Consumption (W) Weight (kg) DescriptionPMBD3640 0.05 10 5 4 Port Branch Distribution Unit (BD Unit)




Accessories http://www.lg.com/us/air-conditione

Ceiling GrillPart Number DescriptionPT-UMC Single Zone Cassette Front Grille, Separate Box, Required with Indoor ModelPT-UQC Multi-Zone Cassette Front Grille, Separate Box, Required with Indoor Model

Plasma KitPart Number DescriptionPTPKM0 Plasma Filter Kit for Single Inverter Cassette IndoorsPTPKQ0 Plasma Filter Kit for Cassette Indoors for Flex Multi Systems

Simple Wired Wall ThermostatPart Number DescriptionPQRCVCL0 / PQRCVCL0QW Simple Wired Wall Thermostat, Can be used on all Types of Indoors of Flex Multi Systems




Air Conditioning EquipmentsPortableLGModel LP0711WNR

Features: • Programmable 24-hour on-off timer • Multiple fan speeds with Auto Cool • Auto Evaporation System • Remote Control • Auto Restart • Thermostat Control


Part Number Color Dry Air Flow (CFM) Rated AmpsVoltage / 50 Hz Watts Net Weight (lbs) DescriptionLP0711WNR White 180 7.6 115 820 48.5 7,000 btu Portable Air Conditioner With

Remote, WhiteSpecifications: Display Panel 21-3/4" x 33-1/16" x 14" Dimensions Shipping (W x H x D) 57.3 Shipping Weight (lbs.) 24 Hr, On / Off Programmable Timer 2 Fan Speed: Cooling 2 Fan Only Speed Rotary Compressor Front Type Air Discharge 21-3/4" x 33-1/16" x 14"

Control Button Type Standard Chassis Type Fixed Outdoor Vent / Exhaust Exhaust Only (1.5M) Indoor / Outdoor Fan Type Blower Water Full Indicator Yes Easy-Roll Casters Yes Air Filter Washable Window Installation Kit Yes

Model LP0910WNRFeatures: • Programmable 24-hour on-off timer • Multiple fan speeds with Auto Cool • Auto Evaporation System • Remote Control • Auto Restart • Thermostat Control


Part Number BTUPerformance

Color RatedAmps

Watts Dry Air Flow(CFM)

Net Weight(lbs)

Description

LP0910WNR 9,000 Cooling White 9.2 980 200 55 9,000 btu Portable Air Conditioner With Remote,White

Specifications: Display Panel LED Dimensions Shipping (W x H x D) 19-7/16" x 34-13/32" x 15-1/2"Shipping Weight (lbs.) 66.2 Programmable Timer 24 Hr, On / Off Fan Speed: Cooling 2 Fan Only Speed 2 Compressor Rotary Type Air Discharge Inclined

Control Button Type Standard Chassis Type Fixed Outdoor Vent / Exhaust Exhaust Only (1.5M)Indoor / Outdoor Fan Type Blower Water Full Indicator Yes Easy-Roll Casters Yes Air Filter Washable Window Installation Kit Yes




Air Conditioning EquipmentsPortableLGModel LP1111WXR

Features: • Dehumidification Function • Oscillating air vent • Programmable 24-hour on-off timer • LCD Remote Control • Thermostat Control • Auto Swing • Auto Restart • Energy Saver Function


Part Number Color RatedAmps

Watts BTUPerformance

Dry Air Flow(CFM)

Net Weight(lbs)

Description

LP1111WXR White 11 1,200 11,000 Cooling 230 66.2 11,000 btu Portable Air Conditioner WithRemote, White

Specifications: Display Panel LED Dimensions Shipping (W x H x D) 20-7/16" x 34-7/16" x 17-13/16" Shipping Weight (lbs.) 72.8 Programmable Timer 24 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor Rotary Type Air Discharge Inclined and Top

Control Button Type Standard Chassis Type Fixed Outdoor Vent / Exhaust Exhaust Only (1.5M) Indoor / Outdoor Fan Type Blower Water Full Indicator Yes Easy-Roll Casters Yes Air Filter Washable Window Installation Kit Yes

Model LP1311BXRFeatures: • Dehumidification Function • Oscillating air vent • Programmable 24-hour on-off timer • LCD Remote Control • Thermostat Control • Auto Swing • Auto Restart • Energy Saver Function


Part Number Color Watts RatedAmps

BTUPerformance

Dry Air Flow(CFM)

Net Weight(lbs)

Description

LP1311BXR MetallicSilver/Black

1,340 11.8 13,000 Cooling 250 68.3 13,000 btu Portable Air Conditioner With Remote,Metallic Silver/Black

Specifications: Display Panel White LCD Dimensions Shipping (W x H x D) 20-7/16" x 34-7/16" x 17-13/16" Shipping Weight (lbs.) 75 Programmable Timer 24 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor LVN Type Air Discharge Inclined and Top

Control Button Type Digital touch sensor Chassis Type Fixed Outdoor Vent / Exhaust Exhaust Only (1.5M) Indoor / Outdoor Fan Type Blower Water Full Indicator Yes Easy-Roll Casters Yes Air Filter Washable Window Installation Kit Yes




Air Conditioning EquipmentsPortableLGModel LP1411SHR

Features: • Dehumidification Function • Oscillating air vent • Heat Pump Technology • Programmable 24-hour on-off timer • LCD Remote Control • Energy saver • Thermostat control • Auto swing • Blower indoor/ outdoor fan


BTU Performance Part Number Color Watts Rated

Amps Cooling Heating Dry Air Flow

(CFM)Net Weight

(lbs)Description

LP1411SHR Silver 1,380 12.0 14,000 14,000 270 72.8 14,000 btu Portable Air Conditioner With Remote,Silver

Specifications: Display Panel White LCD Dimensions Shipping (W x H x D) 23-1/8" x 34-7/16" x 17-1/2" Shipping Weight (lbs.) 81.6 Programmable Timer 24 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor LVN Type Air Discharge Inclined and Top Control Button Type Digital touch sensor Chassis Type Fixed Outdoor Vent / Exhaust Exhaust Only (1.5M) Indoor / Outdoor Fan Type Blower Water Full Indicator Yes Easy-Roll Casters Yes Air Filter Washable Window Installation Kit Yes Auto Door Open/Close System Yes




Air Conditioning EquipmentsPTACLGPTAC Heat Pump 208/230V

Features: • Digital Control Panel with Temperature Display • ULTRA QUIET Operation • Standard Gold Fin Corrosion Protection • High EER Rating, ADA Compliant • Standard Connections for Remote Thermostat • Standard Industry Size makes installation Easy

and Economical

• 2 Cooling/ 2 Heating/ 2 Fan Modes • Energy Saving Mode • Polymeric Mesh Filter • Separate Indoor/ Outdoor Motors • Emergency Heat Back-up • Freeze Room Protection • Defrost Control, 4 Comfort Sensors


Capacity (BTUs)Part Number Control

Type Cooling Heating Refrigerant Net Weight

(lbs)Description

LP073HD2A Digital 7,400/7,200 6,400/6,200 R410A 95.7 Heat Pump 208/230V Packaged Terminal AirConditioner, 7000 Btuh, 2.5 kw





Note: * LG verified sound rating ** Adjustable by temperature limiting with DIP switches on the unit

PTAC Heat Pump 265VFeatures: • Digital Control Panel with Temperature Display • ULTRA QUIET Operation • Standard Gold Fin Corrosion Protection • High EER Rating, ADA Compliant • Standard Connections for Remote Thermostat • Standard Industry Size makes installation Easy

and Economical



Capacity (BTUs)Part Number Control

Type Cooling Heating Refrigerant Net Weight

(lbs)Description

LP076HD2A Digital 7,300 6,100 R410A 97.9 Heat Pump 265V Packaged Terminal Air Conditioner,7000 Btuh, 2.5 kw




LP156HD3A Digital 14,700 12,100 R410A 116 Heat Pump 265V Packaged Terminal Air Conditioner,15000 Btuh, 3.5 kw





Air Conditioning EquipmentsPTACLGPTAC Heat/Cool 208/230V

Features: • Digital Control Panel with Temperature Display • ULTRA QUIET Operation • Standard Gold Fin Corrosion Protection • High EER Rating, ADA Compliant • Standard Connections for Remote Thermostat • Standard Industry Size makes installation Easy

and Economical



Part Number Capacity (BTUs)Cooling

ControlType

Net Weight(lbs)

Power Supply(V/Hz/ø)

Refrigerant Description

LP093CD3A 9,000/8,800 Digital 101.6 208-230 / 60 / 1 R410A Heat/Cool 208/230V Packaged Terminal AirConditioner, 9000 Btuh, 3.5 kw





PTAC Heat/Cool 265VFeatures: • Digital Control Panel with Temperature Display • ULTRA QUIET Operation • Standard Gold Fin Corrosion Protection • High EER Rating, ADA Compliant • Standard Connections for Remote Thermostat • Standard Industry Size makes installation Easy

and Economical



Part Number ControlType

Capacity (BTUs)Cooling

Power Supply(V/Hz/ø)

Refrigerant Net Weight(lbs)

Description

LP076CD2A Digital 7,200 265 / 60 / 1 R410A 93 Heat/Cool 265V Packaged Terminal AirConditioner, 7000 Btuh, 2.5 kw

LP076CD3A Digital 7,200 265 / 60 / 1 R410A 93 Heat/Cool 265V Packaged Terminal AirConditioner, 7000 Btuh, 3.5 kw

LP096CD3A Digital 9,000 265 / 60 / 1 R410A 103.8 Heat/Cool 265V Packaged Terminal AirConditioner, 9000 Btuh, 3.5 kw

LP126CD3A Digital 14,000 265 / 60 / 1 R410A 103.8 Heat/Cool 265V Packaged Terminal AirConditioner, 12000 Btuh, 3.5 kw





Air Conditioning EquipmentsThru-The-WallLGModel LT081CNR

Features: • Universal Fit for Sleeve • Gold Fin Anti-Corrosion • 3 cooling and fan speeds with Auto Cool • 4-Way Air Direction • Power Failure Auto Restart • Programmable 24-hour on-off timer • Electronic Touch Controls with Remote • Energy Saver Mode • Energy Star A/C


Part Number Height(inch)

Width(inch)

Depth(inch)

BTU PerformanceCooling

Watts(Cooling)

Net Weight(lbs)

Description

LT081CNR 14-13/32 24 20-3/32 8,000 830 73 8,000 btu Thru-The-Wall Air Conditioner WithRemote, 115V

Specifications: Carton Height (inch) 17-13/32 Carton Width (inch) 27-23/32 Carton Depth (inch) 22-13/32 Fan Speed: Cooling(Heating) 3 Fan Only 3 Compressor Rotary

Type Air Discharge Top Chassis Type XB Outdoor Vent / Exhaust Yes Indoor Fan Type Turbo Energy Saver Function Yes Real Grille Yes

Model LT101CNRFeatures: • Universal Fit for Sleeve • Gold Fin Anti-Corrosion • 3 cooling and fan speeds with Auto Cool • 4-Way Air Direction • Power Failure Auto Restart • Programmable 24-hour on-off timer • Electronic Touch Controls with Remote • Energy Saver Mode • Installation Manual & Trim Kit



Depth(inch)

Width(inch)


Watts(Cooling)

Net Weight(lbs)

Description

LT101CNR 14-13/32 20-3/32 24 9,800 1,110 78 9,800 btu Thru-The-Wall Air Conditioner WithRemote, 115V







Features: • Universal Fit for Sleeve • Gold Fin Anti-Corrosion • 3 cooling and fan speeds with Auto Cool • 4-Way Air Direction • Power Failure Auto Restart • Programmable 24-hour on-off timer • Electronic Touch Controls with Remote • Energy Saver Mode • Energy Star A/C



Width(inch)

Depth(inch)


Watts(Cooling)

Net Weight(lbs)

Description

LT103CNR 14-13/32 24 20-3/32 10,000 / 9,800 1,140/1,110

78 10,000 btu Thru-The-Wall Air Conditioner WithRemote, 208/230V



Model LT121CNRFeatures: • Universal Fit for Sleeve • Gold Fin Anti-Corrosion • 3 cooling and fan speeds with Auto Cool • 4-Way Air Direction • Power Failure Auto Restart • Programmable 24-hour on-off timer • Electronic Touch Controls with Remote • Energy Saver Mode • Installation Manual & Trim Kit



Width(inch)

Depth(inch)


Watts(Cooling)

Net Weight(lbs)

Description

LT121CNR 14-13/32 24 20-3/32 11,500 1,310 80 11,500 btu Thru-The-Wall Air Conditioner WithRemote, 115V







Features: • Universal Fit for Sleeve • Gold Fin Anti-Corrosion • 3 cooling and fan speeds with Auto Cool • 4-Way Air Direction • Power Failure Auto Restart • Programmable 24-hour on-off timer • Electronic Touch Controls with Remote • Energy Saver Mode • Installation Manual & Trim Kit



Width(inch)

Depth(inch)


Net Weight(lbs)

Watts(Cooling)

Description

LT123CNR 14-13/32 24 20-3/32 11,500 / 11,200 80 1,310/1,270 11,500 btu Thru-The-Wall Air Conditioner WithRemote, 208/230V



Model LT123HNRFeatures: • Universal Fit for Sleeve, Gold Fin Anti-Corrosion • 2 cooling and fan speeds, 4-Way Air Direction • Power Failure Auto Restart • Programmable 24-hour on-off timer • Electronic Touch Controls with Remote • Energy Saver Mode • Installation Manual & Trim Kit


BTUPerformance

Watts


Width(inch)

Depth(inch)

Cooling Heating (Cooling) (Heating) Net Weight(lbs)

Description

LT123HNR 14-13/3224-21/32 19-21/32 11,500 /11,200

11,200 /9,200

1,310/1,270 3,500/2,900 80 11,500 btu Thru-The-Wall Air ConditionerWith Remote, 2 Speed


Type Air Discharge Top Chassis Type XA Outdoor Vent / Exhaust Yes Indoor Fan Type Turbo Energy Saver Function Yes Real Grille Yes





Features: • Universal Fit for Sleeve • Gold Fin Anti-Corrosion • 3 cooling and fan speeds with Auto Cool • 4-Way Air Direction • Power Failure Auto Restart • Programmable 24-hour on-off timer • Electronic Touch Controls with Remote • Energy Saver Mode • Installation Manual & Trim Kit



Width(inch)

Depth(inch)


Watts(Cooling)

Net Weight(lbs)

Description

LT143CNR 14-13/32 24 20-3/32 13,000 / 12,600 1,530/1,480 87 13,000 btu Thru-The-Wall Air Conditioner WithRemote, 208/230V



Model LT143HNRFeatures: • Universal Fit for Sleeve, Gold Fin Anti-Corrosion • 2 cooling and fan speeds, 4-Way Air Direction • Power Failure Auto Restart • Programmable 24-hour on-off timer • Electronic Touch Controls with Remote • Energy Saver Mode • Installation Manual & Trim Kit


BTUPerformance

Watts


Width(inch)

Depth(inch)

Cooling

Heating (Cooling) (Heating) Net Weight(lbs)

Description

LT103HNR 14-13/3224-21/3219-21/32 10,000 /9,800

11,200 /9,200

1,060/1,040 3,500/2,900 78 10,000 btu Thru-The-Wall Air ConditionerWith Remote, 2 Speed


Type Air Discharge Top Chassis Type XA Outdoor Vent / Exhaust Yes Indoor Fan Type Turbo Energy Saver Function Yes Real Grille Yes




Air Conditioning EquipmentsThru-The-WallLGAccessories http://www.lg.com/us/air-conditione

Architectural GrillePart Number Dimensions (W×H×D) (inch) DescriptionAXAGALA01A Architectural Grille, Aluminum ColorAXRGALA01 25-7/8" x 15-17/32" Architectural Grille

Wall SleevePart Number Dimensions (W×H×D) (inch) DescriptionAXSVA1 25-7/8" x 15-17/32" x 16-23/32" 26" Wall Sleeve

Wall Sleeve With Stamped Aluminum GrillePart Number Dimensions (W×H×D) (inch) DescriptionAXSVA4 25-7/8" x 15-17/32" x 16-23/32" Wall Sleeve With Stamped Aluminum Grille




Air Conditioning EquipmentsWindowLGModel LW1012ER

Features: • 3 cooling and fan speeds with Auto Cool • 4-Way Air Direction • Power Failure Auto Restart • Remote Control A/C • 12 Hour On/Off Timer


Part Number Color BTU Performance Watts Rated Amps Net Weight (lbs) DescriptionLW1012ER White 10,000 930 8.5 62 10,000 btu Window Air Conditioner With Remote,

White Specifications:

Dimensions Shipping (W x H x D) 21-1/4" x 17-3/4" x 22-3/4" Shipping Weight (lbs.) 68 Programmable Timer 24 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor Rotary Indoor Fan Type Turbo Type Air Discharge Top Discharge Chassis Type Top Down ENERGY STAR Qualified Yes Outdoor Vent / Exhaust Yes

Model LW1212ERFeatures: • 3 cooling and fan speeds with Auto Cool • 4-Way Air Direction • Power Failure Auto Restart • Remote Control A/C • 12 Hour On/Off Timer • Energy save function


Part Number Color BTU Performance Watts Rated Amps Net Weight(lbs)

Description

LW1212ER White 12,000 1,110 10.2 81 12,000 btu Window Air Conditioner With Remote, White Specifications:

Dimensions Shipping (W x H x D) 27-5/32" x 18-7/16" x 23-1/2" Shipping Weight (lbs.) 87 Programmable Timer 24 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor Rotary Indoor Fan Type Turbo Type Air Discharge Top Discharge Chassis Type Slide In-Out ENERGY STAR Qualified Yes Outdoor Vent / Exhaust Yes




Air Conditioning EquipmentsWindowLGModel LW1212HR

Features: • Seasonal Heating & Cooling • Multiple cooling/heating speeds • 4-Way Air Direction • Remote Control • 24 Hour On/Off Timer


BTU Performance WattsPart Number Color Cooling Heating (Cooling) (Heating) Net Weight

(lbs)Description

LW1212HR White 11,500 /12,000

9,200 /11,200

1,170/1,220 2,900/3,500 87 12,000 btu Heat/Cool Window Air Conditioner WithRemote, White

Specifications:Fan Speed: Cooling(Heating) 2(2) Fan Only Speed 2 Compressor Rotary Type Air Discharge Side by side Chassis Type Slide In-Out Outdoor Vent / Exhaust Yes Indoor / Outdoor Fan Type Blower Energy Saver Function Yes

Model LW1512ERSFeatures: • Electronic Touch Controls with Remote • 4-Way Air Direction • 3 cooling and fan speeds with Auto Cool • Energy saver function


Part Number Color BTU Performance Watts Net Weight(lbs)

Description

LW1512ERS White 15,000 1,380 108 15,000 btu Window Air Conditioner With Remote, White Specifications:

Dimensions Shipping (W x H x D) 30-1/2" x 20-7/8" x 29" Shipping Weight (lbs.) 123 Programmable Timer 24 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor Rotary Indoor Fan Type Turbo Type Air Discharge Top Discharge Chassis Type Slide In-Out Outdoor Vent / Exhaust Yes





Features: • 3 cooling and fan speeds with Auto Cool • Power Failure Auto Restart • Electronic Touch Controls with Remote • 12 Hour On/Off Timer • Energy save function


Part Number Color BTU Performance Voltage / 60Hz

Watts Net Weight(lbs)

Description

LW1812ER White 17,800/18,000 208/230 1,660/1,680 110.5 18,000 btu Window Air Conditioner With Remote,White

Specifications: Dimensions Shipping (W x H x D) 27-1/8" × 20-7/8" × 28-3/4" Shipping Weight (lbs.) 124.6 Programmable Timer 24 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor Rotary Indoor Fan Type Blower Type Air Discharge Top Discharge Chassis Type Slide In-Out ENERGY STAR Qualified Yes Outdoor Vent / Exhaust Yes

Model LW1812HRFeatures: • Seasonal Heating & Cooling • Multiple cooling/heating speeds • 4-Way Air Direction • Remote Control • 24 Hour On/Off Timer



(lbs)Description

LW1812HR White 17,500 /18,000

9,800 /12,000







Features: • 3 cooling and fan speeds with Auto Cool • Power Failure Auto Restart • Electronic Touch Controls with Remote • 12 Hour On/Off Timer • Energy save function


Part Number Color BTU Performance Rated Amps Watts Net Weight(lbs)

Description

LW2412ER White 23,500/24,000 12.1/11.1 2,550/2,600 129.2 24,000 btu Window Air Conditioner With Remote,White

Specifications: Dimensions Shipping (W x H x D) 29-13/16" x 22-3/8" x 29" Shipping Weight (lbs.) 143.5 Programmable Timer 12 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor ASH232 Indoor Fan Type Acentric Type Air Discharge Top and Rotating [Manual] Chassis Type Slide Out ENERGY STAR Qualified Yes Outdoor Vent / Exhaust Yes




(lbs)Description

LW2412HR White 23,000 /23,500

9,400 /11,600







Features: • 2 cooling and fan speeds • 2-way air direction • Electronic Touch Controls with Remote • Easy-to-Use Installation Kit • Energy Saver Mode • Washable Permanent Filter


Part Number Color BTU Performance Watts Rated Amps Net Weight(lbs)

Description

LW6012ER White 6,000 560 5.2 48 6,000 btu Window Air Conditioner With Remote, White Specifications:

Dimensions Shipping (W x H x D) 22-9/16" x 15-3/16" x 17-7/32" Shipping Weight (lbs.) 52 Programmable Timer 12 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor Rotary Indoor Fan Type Turbo Type Air Discharge Top Discharge Chassis Type Top Down




(lbs)Description

LW7012HR White 7,000 3,850 720 1260 60 7,000 btu Heat/Cool Window Air Conditioner WithRemote, White






Features: • 3 cooling and fan speeds with Auto Cool • 4-Way Air Direction • Power Failure Auto Restart • Remote Control • 12 Hour On/Off Timer • Energy saver function


Part Number Color BTU Performance Watts Net Weight(lbs)

Description

LW8012ER White 8,000 740 59 8,000 btu Window Air Conditioner With Remote, White Specifications:

Dimensions Shipping (W x H x D) 22-11/16" x 15-1/4" x 21-1/4" Shipping Weight (lbs.) 63 Programmable Timer 24 Hr, On / Off Fan Speed: Cooling 3 Fan Only Speed 3 Compressor Rotary Indoor Fan Type Turbo Type Air Discharge Top Discharge Chassis Type Top Down ENERGY STAR Qualified Yes




HEATING EQUIPMENT

Item ID Description3508732 Top-Vent Counterflow Furnace with Blower-35,000 Btu/hr.5008732 Top-Vent Counterflow Furnace with Blower-50,000 Btu/hr.6508732 Top-Vent Counterflow Furnace with Blower-65,000 Btu/hr.4007732 Direct-Vent Counterflow Furnace with Blower-40,000 Btu/hr.6257732 Direct-Vent Counterflow Furnace with Blower-62,500 Btu/hr.6701 Side Outlet Register with 10" Boot for Top and Direct Vent 6801 Rear Outlet Register with 10" Boot and Damper for Top-Vent7685 Gas Conversion Kit from Natural Gas to Propane 35087327686 Gas Conversion Kit from Natural Gas to Propane 40077327687 Gas Conversion Kit from Natural Gas to Propane 50087327689 Gas Conversion Kit from Natural Gas to Propane 62577327690 Gas Conversion Kit from Natural Gas to Propane 3508732

Item ID Description3501522 Enclosed Front Hearth Heater-35,000 Btu/hr.-Natural Gas5001522 Enclosed Front Hearth Heater-50,000 Btu/hr.-Natural Gas6501522 Enclosed Front Hearth Heater-65,000 Btu/hr.-Natural Gas2102 Blower Accessory8932 Gas Conversion Kit from Natural Gas to Propane 35015228933 Gas Conversion Kit from Natural Gas to Propane 50015228934 Gas Conversion Kit from Natural Gas to Propane 6501522

All Models

2102 8932, 8933, 8934

7685, 7686, 7687, 7689, 7690

Forsaire Counterflow Wall Furnaces

Vented Room Heaters

6701 6801

All Models

Air Conditioning Equipment 36

Top-Vent Gravity Wall FurnacesDescriptionMonterey Top-Vent 25,000 Btu/hr.-Natural GasMonterey Top-Vent 35,000 Btu/hr.-Natural GasMonterey Top-Vent 50,000 Btu/hr.-Natural Gas-Dual Wall

2901 Blower Accessory6901 Rear Outlet Register 2509622 and 3509622 Models Only8901 Gas Conversion Kit from Natural Gas to Propane 25096228902 Gas Conversion Kit from Natural Gas to Propane 35096228903 Gas Conversion Kit from Natural Gas to Propane 5009622

5009622 25096223509622

8901, 8902, 8903

Direct-Vent Gravity Wall FurnacesDescription

1403622 Direct-Vent Gravity-14,000 Btu/hr.-Natural Gas2203622 Direct-Vent Gravity-22,000 Btu/hr.-Natural Gas3003622 Direct-Vent Gravity-30,000 Btu/hr.-Natural Gas2302 Blower Accessory for 22,000 and 30,000 Btu/hr. Furnaces2303 Blower Accessory for 14,000 Btu/hr. Furnaces8925 Gas Conversion Kit from Natural Gas to Propane 14036228926 Gas Conversion Kit from Natural Gas to Propane 22036228927 Gas Conversion Kit from Natural Gas to Propane 3003622

1403622

2303 8925, 8926, 8927 2302

2203622, 3003622

HEATING EQUIPMENT

Item ID

Item ID250962235096225009622

69012901



Refrigerant andRefrigeration Parts

SPRING/SUMMER 2013


CompressorsHermetic CompressorCopelandCR CompressorR22

Part Number Capacity(Btuh)

Dimensions L x H xW (In)

Motor Type Voltage Description

CR16KQ-PFV-980WB 16,000 9.31 x 13.38 x 8.94 Single-Phase 208-230/1/60 16,000 Btuh Hermetic Compressor, R22, 208-230/1/60 V,BOM-980












1 Refrigerant & Refrigeration Parts 1

CompressorsHermetic CompressorCopelandCR CompressorR22

Model Ref App Evap (°F) /Cond (°F)

RG (°F) /Liq (°F)

Capacity (Btu/hr)

Power (Watts)

Current (Amps)

EER (Btu/Wh)

Mass Flow (lbs/hr)

Sound Power (dBA)

Vibration (mil speak)

45 / 130 65 / 115 15700 1560 6.90 10.00 230 68 Avg 2.0 Avg AC

45 / 100 65 / 85 21300 1310 5.80 16.30 275 73 Max 3.0 Max

45 / 130 65 / 130 14400 1560 6.90 9.20 228 68 Avg 2.0 Avg CR16KQ-PFV

R-22

HT 20 / 120 65 / 120 7720 1150 5.00 6.70 113 73 Max 3.0 Max

45 / 130 65 / 115 18400 1860 8.10 9.90 270 70 Avg 2.0 Avg AC

45 / 100 65 / 85 25000 1560 6.80 16.10 322 75 Max 3.0 Max

45 / 130 65 / 130 17100 1830 8.00 9.30 270 70 Avg 2.0 Avg CR18KQ-PFV R-22

HT 20 / 120 65 / 120 9000 1330 5.90 6.70 132 75 Max 3.0 Max

45 / 130 65 / 115 21800 2180 9.70 10.00 320 70 Avg 2.0 Avg AC

45 / 100 65 / 85 29100 1840 8.20 15.80 374 75 Max 3.0 Max

45 / 130 65 / 130 20000 2140 9.60 9.40 317 70 Avg 2.0 Avg CR22KQ-PFV R-22

HT 20 / 120 65 / 120 10600 1600 7.40 6.60 155 75 Max 3.0 Max

45 / 130 65 / 115 23900 2400 11.60 9.90 352 70 Avg 2.0 Avg AC

45 / 100 65 / 85 31200 2040 10.30 11.70 404 75 Max 3.0 Max

45 / 130 65 / 130 22100 2380 11.90 9.30 349 70 Avg 2.0 Avg CR24KQ-PFV R-22

HT 20 / 120 65 / 120 11900 1810 9.70 6.60 175 75 Max 3.0 Max 45 / 130 65 / 115 27300 2780 13.40 9.80 399 70 Avg 2.0 Avg

AC 45 / 100 65 / 85 35400 2370 11.80 14.90 456 75 Max 3.0 Max 45 / 130 65 / 130 25100 2730 13.30 9.20 397 70 Avg 2.0 Avg

CR28KQ-PFV R-22

HT 20 / 120 65 / 120 13700 2040 10.70 6.70 200 75 Max 3.0 Max 45 / 130 65 / 115 29500 3030 14.40 9.70 432 70 Avg 2.0 Avg

AC 45 / 100 65 / 85 37700 2570 12.60 14.70 485 75 Max 3.0 Max 45 / 130 65 / 130 27100 2970 14.30 9.10 428 70 Avg 2.0 Avg

CR30KQ-PFV R-22

HT 20 / 120 65 / 120 15200 2260 11.50 6.70 222 75 Max 3.0 Max 45 / 130 65 / 115 32700 3270 14.80 10.00 480 74 Avg 2.0 Avg

AC 45 / 100 65 / 85 42200 2750 12.70 15.30 545 79 Max 3.0 Max 45 / 130 65 / 130 30200 3250 14.90 9.30 477 74 Avg 2.0 Avg

CR33KQ-PFV R-22

HT 20 / 120 65 / 120 17000 2410 11.30 7.10 249 79 Max 3.0 Max 45 / 130 65 / 115 41700 4030 18.70 10.30 610 76 Avg 2.2 Avg

AC 45 / 100 65 / 85 53100 3390 16.00 15.70 685 81 Max 3.2 Max

45 / 130 65 / 130 37700 4000 18.40 9.40 595 76 Avg 2.2 Avg CR41KQ-PFV R-22

HT 20 / 120 65 / 120 21900 3010 14.30 7.30 321 81 Max 3.2 Max

45 / 130 65 / 115 47500 4590 22.00 10.40 695 76 Avg 3.0 Avg AC

45 / 100 65 / 85 60500 3810 18.90 15.90 780 81 Max 4.0 Max

45 / 130 65 / 130 44500 4600 22.10 9.70 705 76 Avg 3.0 Avg CR47KQ-PFV R-22

HT 20 / 120 65 / 120 26200 3510 17.70 7.50 383 81 Max 4.0 Max

45 / 130 65 / 115 53300 5260 24.10 10.10 780 76 Avg 3.0 Avg AC

45 / 100 65 / 85 67200 4400 20.50 15.30 865 81 Max 4.0 Max

45 / 130 65 / 130 49900 5260 24.10 9.50 790 76 Avg 3.0 Avg CR53KQ-PFV R-22

HT 20 / 120 65 / 120 29400 4010 19.30 7.30 429 81 Max 4.0 Max




CompressorsScroll CompressorsCopelandZP CompressorR410A

Part Number Capacity(Btuh)

Dimensions L x H xW (In)

Motor Type Voltage Description

ZP23K3E-PFV-930 23,000 9.57 x 14.75 x 9.57 Single-Phase 208-230/1/60 23,000 Btuh Scroll Compressor, R410A, 208-230/1/60 V,BOM-830




ZP54K3E-TFD-930 54,500 9.63 x 17.91 x 9.82 Three-Phase 460/3/60 54,000 Btuh Scroll Compressor, R410A, 460/3/60 V,BOM-930



Model Ref App Evap (°F) /Cond (°F)

RG (°F) /Liq (°F)

Capacity(Btu/hr)

Power (Watts)

Current (Amps)

EER (Btu/Wh)

Mass Flow (lbs/hr)

Sound Power (dBA)

Vibration (milspeak)

45 / 130 65 / 115 23500 2400 11.00 9.80 347 68 Avg 2.0 Avg ZP23K3E-PFV R410A AC

45 / 100 65 / 85 29400 1630 7.40 18.00 364 73 Max 3.0 Max 45 / 130 65 / 115 31300 3130 14.50 10.00 461 70 Avg 2.0 Avg

ZP32K3E-PFV R410A AC 45 / 100 65 / 85 39000 2100 10.00 18.60 483 75 Max 3.0 Max 45 / 130 65 / 115 36200 3620 16.60 10.00 535 70 Avg 2.0 Avg



ZP54K3E-TFD R410A AC 45 / 100 65 / 85 67500 3500 5.70 19.30 835 77 Max 3.0 Max 45 / 130 65 / 115 54500 5300 23.60 10.30 805 72 Avg 2.0 Avg


ZP57K3E-PFV R410A AC 45 / 100 65 / 85 70700 3720 16.60 19.00 875 79 Max 3.0 Max




ControlsPressure SwitchesMarsKlixon Pressure Switches - Series 333Fixed Setting Pressure Controls Low / High Pressure Cut-Out

Features: Tamper proof construction Direct mounting on tubing UL & CSA recognized Specifications: Contacts rated at 6 amps, 24-240 volts.

CutPart Number Connection

Size (In)In Out Mounting Reset

TypeWeight Description

33325 18 Leads 300 425 1/4" FemaleFlare S.A.E.

Automatic 0.10 High Pressure Cut-Out - Open on Pressure Rise, AutomaticReset, Normally Closed, 425 Cut-Out, 300 Cut-In


Automatic 0.10 High Pressure Cut-Out - Open on Pressure Rise, AutomaticReset, Normally Closed, 300 Cut-Out, 200 Cut-In


Automatic 0.10 Low Pressure Cut-Out - Open on Pressure Drop, AutomaticReset, Normally Open, 15 Cut-Out, 35 Cut-In





Shut-Off ValvesParker Hannifin Corp.Air Conditioning Condensing Unit Shut-Off Valves

Features: All Brass body and stem 3/8" to 7/8" ODF sweat extended copper connections Low cost alternative to ball and/or other type of hand valves Rugged brass construction provides universal replacement for other valves

ConnectionPart Number Type Body Size Factory Feild Material Description278395-061 Frontseat 11/16"

Square Stock3/8 Factory

Connection Size3/8 Field

Connection SizeBrass,Copper

3/8” ODF with Right Hand Access Fitting

Access fitting on left looking directly at field connection. This allows side by side mounting with suction valve. [[

Thermostatic Expansion ValvesParkerFitting AdapterAeroquip Fitting Adapter

Part Number Product Type Size Description183372 Refrigeration Valve Service

Parts5/8” ODF x Aeroquip

Fitting5/8” ODF x Aeroquip Fitting Adapter

183373 Refrigeration Valve ServiceParts

1/2” ODF x AeroquipFitting

1/2” ODF x Aeroquip Fitting Adapter




ControlsThermostatic Expansion ValvesParkerFitting AdapterChatliff Fitting Adapter

Part Number Product Type Size Description183374 Refrigeration Valve Service

Parts5/8" ODF x Chatliff Fitting 5/8" ODF x Chatliff Fitting Adapter with Teflon

Seal183375 Refrigeration Valve Service

Parts1/2" ODF x Chatliff Fitting 1/2" ODF x Chatliff Fitting Adapter with Teflon

Seal

SAE Fitting Adapter

Part Number Product Type Size Description183376 Refrigeration Valve Service Parts 1/2 ODF x 3/8 SAE Fitting 1/2" ODF x 3/8 SAE Fitting Adapter

HC SeriesFeatures: Stainless steel power element Bypass bleeds available Bi-directional metering available Weight: 10.7 oz. (.30 kg) Factory set or field adjustable superheat Low pressure drop internal check valve The HC series adds a built-in 5 ton check valve for R-22, R-407C and R-410A heat pump applications

with either factory set or field adjustable superheat. Applications: Air Conditioning Systems Heat Pump Systems Bi-flow (package) Systems

ConnectionsPart Number Capacity (Ton) Inlet (In) Outlet (In) Refrigerant DescriptionHCAE-3-VX100 3 ton 3/8" ODF

(copper)1/2" ODF(copper)

R-22, R-407C 3 Ton, 3/8" ODF Inlet x 1/2" ODF Outlet HC SeriesThermal Expansion Valve, R22, R407C, VX100

HCAE-5-VX100 5 ton 3/8" ODF(copper)

5/8" ODF(copper)

R-22, R-407C 5 Ton, 3/8" ODF Inlet x 5/8" ODF Outlet HCAE SeriesThermal Expansion Valve, R22, R407C, VX100

HCAE-3-ZX200 3 ton 3/8" ODF(copper)

1/2" ODF(copper)

R410A 3 Ton, 3/8" ODF Inlet x 1/2" ODF Outlet HCAE SeriesThermal Expansion Valve, R410A, ZX200

HCAE-5-ZX200 5 ton 3/8" ODF(copper)

5/8" ODF(copper)

R410A 5 Ton, 3/8" ODF Inlet x 5/8" ODF Outlet HCAE SeriesThermal Expansion Valve, R410A, ZX200




ControlsThermostatsMarsDefrost ThermostatsSeries 330

Features: MARS Series 330 defrost controls are designed to replace many defrost thermostats. The leads are of sufficient length for the connection to be made at the same location as was the control

removed. The connection should be insulated in a manner similar to that on the original equipment. The selection of the proper thermostat can be made by matching the temperature code of the thermostat

removed to the code on the MARS Thermostat. Refrigerators, A/C units, & heat pumps, dehumidifiers, icemakers or any place where a fixed temperature

control is required in a wet or dirty environment. Thermostats have 32” leads.

Operating Temperatures °FPart Number Cubes Close Open Weight Description33008 17.0000 25 45 0.08 Defrost Thermostats for Defrost Termination, - 45 °F Open

Temperature, 25° F Close Temperature33010 17.0000 35 55 0.25 Defrost Thermostats for Defrost Termination, - 55 °F Open




Temperature, 60° F Close Temperature

Inductive Volt F.L.A. L.R.A. 120 5.8 25 240 2.9 70

Heat Pump ThermostatsSeries 330

Features: MARS heat pump defrost thermostats are designed for direct replacement of most existing controls of

this type. The temperature settings and tubing sizes have been carefully selected from the most popular OEM

settings. Each MARS thermostat comes complete with extra long 54 inch leads, mounting clamp, and installation

instructions for fast and simple field installation. Four controls cover most requirements, Tapered mounting edge for maximum heat transfer Extra long 54 inch leads for simple wiring Individually boxed with mounting clamp and instructions UL & CUL listed

OperatingTemperatures °F

Part Number Leads(In)

Close Open Weight Description

33490 54 30 80 0.25 Heat Pump Defrost Thermostats, 80 °F Open Temperature, 3/8" Tube Mounting33492 54 30 80 0.25 Heat Pump Defrost Thermostats, 80 °F Open Temperature, 1/2" Tube Mounting33494 54 30 65 0.20 Heat Pump Defrost Thermostats, 65 °F Open Temperature, 3/8" Tube Mounting33496 54 30 65 0.15 Heat Pump Defrost Thermostats, 65 °F Open Temperature, 1/2" Tube Mounting

Cycles x1000 Volts FLA LRA Resistive Amps VA 100 120VAC 5.8 34.8 10 125 100 240VAC 2.9 17.4 10 125 30 120VAC 10.0 40.0 – – 30 240VAC 10.0 40.0 – –

100 30VDC – – 1 –




ControlsTimersIntermaticDefrost TimerDTAV40 Series Auto-Voltage

Features: DTAV40 replaces over 40 competitive models Auto-Voltage automatically adjusts for 120-240 VAC Mounts in existing enclosures, no tools required Box lug terminals Defrost times programmable in 15-minute intervals with captive trippers UL Type 3R outdoor enclosure (DTAV40IM - UL Type 1 Metallic) 40 Amp, 2 HP Rating Moisture resistant conformal coated board LED indicators for defrost and refrigeration cycles Defrost cycles are programmed independently "Real-time" clock face for quick, easy and accurate setting Warranty Limited 1 year

ON/OFF

Part Number Input Voltage Max Min Warranty Wire Size DescriptionDTAV40 Auto-Voltage

120-240 VAC, 60 Hz23 hours, 45

minutes15

minutesLimited 1

yearAWG #8 Auto-Voltage Defrost Timer, 40 Amp, 2 HP Rating

MarsDefrost TimerSolid State Devices - Series 347

Features: Adjustable 90 or 45 minute defrost interval. Replaces GE directly. Replaces Paragon with bracket. Telechron S1 motor. UL and CSA listings available. Time Delays: Digital Interval delay duration: jumper selectable as 45 or 90 min. D faults to 45 min. if

jumper wire is not connected. Defrost Delay Duration: 10 min. or terminated upon the defrost thermostat opening. Output: relay/contactor output Type - solid state, Rating -0.50 amp steady state, Form - SPDT N.O. Surface Mount: With two #6 screws .25 inch male quick connect terminal.

Part Number Operating Temperature Frequency (Hz) Voltage Weight Description34790 -40°C to +85°C 50/60 Hz 240 0.40 240 Volt Heat Pump Defrost Timer




Electrical & AccessoriesContactors/RelaysMarsCurrent Relays - Series 270 Universal Replacement

Features: 12 MARS current relays manufactured by General Electric can replace almost any current relay found on

refrigerators, freezers, water cooler, pumps and vending machines. Replace plug-on, bracket-type, split-phase, and capacitor-start current relays Covers replacement needs of 1/12 H.P. 115V to 1-1/2 H.P. 230V and parts kits Clearly labeled terminals for fast wiring Each relay packaged with installation instructions and wiring diagrams UL and CSA listings available

Part Number MaxPick-Up

Min DropOut

SellingU/M

Weight Description

27003 6.8 5.8 EA 0.05 Current Relays - Universal Replacement, 6.8 Max Pick-Up, 5.8 Max Drop-Out27004 8.3 7.1 EA 0.05 Current Relays - Universal Replacement, 8.3 Max Pick-Up, 7.1 Max Drop-Out27005 10.5 8.7 EA 0.10 Current Relays - Universal Replacement, 10.5 Max Pick-Up, 8.7 Max Drop-Out27006 11.8 9.8 EA 0.25 Current Relays - Universal Replacement, 11.8 Max Pick-Up, 9.8 Max Drop-Out27007 13.8 11.5 EA 0.25 Current Relays - Universal Replacement, 13.8 Max Pick-Up, 11.5 Max Drop-Out27008 15.1 12.6 EA 0.25 Current Relays - Universal Replacement, 15.1 Max Pick-Up, 12.6 Max Drop-Out27009 16.8 14.0 EA 0.25 Current Relays - Universal Replacement, 16.8 Max Pick-Up, 14.0 Max Drop-Out27010 22.5 18.0 EA 0.05 Current Relays - Universal Replacement, 22.5 Max Pick-Up, 18.0 Max Drop-Out27011 25.4 20.3 EA 0.25 Current Relays - Universal Replacement, 25.4 Max Pick-Up, 20.3 Max Drop-Out27012 31.0 25.0 EA 0.01 Current Relays - Universal Replacement, 31.0 Max Pick-Up, 25.0 Max Drop-Out

Model No. Application Survey By Horsepower1 (AT 115)2 27003 1/8, 1/6, 1/5 27004 1/6, 1/5, 1/4 27005 1/5, 1/4 27006 1/5, 1/4, 1/3 27007 1/4, 1/3 27008 1/4, 1/3, 1/2 27009 1/3, 1/2 27010 1/3, 1/2 27011 1/3, 1/2, 3/4 27012 1/2, 3/4

1. Current relays cannot be replaced by horsepower, amperage, or nameplate data alone. Refer to cross reference information for proper

replacement of original equipment current relays by part numbers. 2. These current relays are often used on 230 volt applications, however this horsepower survey refers only to 115 volt applications.




Electrical & AccessoriesContactors/RelaysMarsPotential Relays - Series 190

Features: Genuine MARS relays replace thousands of O.E.M. models Non-Positional Wide range of selectivity QC-6 Kit included with each relay to convert screw-on to push-on Instructions and wiring diagram included in each relay Universal break-off bracket on each relay. Simply snap-off parts not needed UL and CSA listings available

Pick-UpPart Number Max Min Continuous

Coil VoltageWeight Description

19002 153 139 170 0.35 Potential Relays, 170 Continuous Coil Voltage, 153 Pick-Up Max19003 275 260 395 0.40 Potential Relays, 395 Continuous Coil Voltage, 275 Pick-Up Max19004 182 168 332 0.40 Potential Relays, 332 Continuous Coil Voltage, 182 Pick-Up Max19005 225 215 395 0.40 Potential Relays, 395 Continuous Coil Voltage, 225 Pick-Up Max19006 315 295 420 0.40 Potential Relays, 420 Continuous Coil Voltage, 315 Pick-Up Max19007 345 325 502 0.45 Potential Relays, 502 Continuous Coil Voltage, 345 Pick-Up Max19008 195 180 336 0.40 Potential Relays, 336 Continuous Coil Voltage, 195 Pick-Up Max19009 305 285 253 0.35 Potential Relays, 253 Continuous Coil Voltage, 305 Pick-Up Max19010 232 212 420 0.40 Potential Relays, 420 Continuous Coil Voltage, 232 Pick-Up Max




Refrigeration ComponentsFilter-DriersParkerCatch-All Compact Style Filter-DriersC Series Suction Line Type - ODF Solder

Features: Short overall length, suitable for cramped piping situations — shorter than other similar type filter-driers. Suitable for use on 1 through 5 ton air conditioning systems, with suction line sizes in the range of 1/29 to

1-1/89. Also applicable on the common suction line of heat pump systems. The famous Sporlan HH core removes all types of contaminants including moisture, acid, dirt, and

sludge. A blend of two desiccants, plus activated charcoal, gives maximum performance. Access valves permit measuring the pressure drop across the filter-drier during clean-up, following a

hermetic motor burnout.

http://www.parker.com/portal/site/PARKER/menuitem. 7100150cebe5bbc2d6806710237ad1ca/? vgnextoid=f5c9b5bbec622110VgnVCM10000032a71dacRCRD&vgnextfmt=EN&vgnext catid=7256482&vgnextcat=REFRIGERANT&Wtky=DRYERS

Part Number ConnectionType

Description

C-145-S ODF 5/8" Suction Line Type - ODF Solder Catch-All Compact Filter Drier, 4.44" Dia., 4.38 LengthC-146-S ODF 3/4" Suction Line Type - ODF Solder Catch-All Compact Filter Drier, 4.44" Dia., 4.83 LengthC-147-S ODF 7/8" Suction Line Type - ODF Solder Catch-All Compact Filter Drier, 4.44" Dia., 4.97 LengthC-149-S ODF 1-1/8" Suction Line Type - ODF Solder Catch-All Compact Filter Drier, 4.44" Dia., 4.93

Length

Catch-All Sealed Type Filter-DriersC Series Suction Line Type - ODF Solder

http://www.parker.com/portal/site/PARKER/menuitem. 7100150cebe5bbc2d6806710237ad1ca/? vgnextoid=f5c9b5bbec622110VgnVCM10000032a71dacRCRD&vgnextfmt=EN&vgnext catid=7256482&vgnextcat=REFRIGERANT&Wtky=DRYERS

Part Number ConnectionSize (In)

Description

C-084-S 1/2 1/2" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 2.62" Dia., 5.44 LengthC-164-S 1/2 1/2" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.00" Dia., 6.00 LengthC-165-S 5/8 5/8" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.00" Dia., 6.31 LengthC-166-S 3/4 3/4" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.00" Dia., 6.75 LengthC-167-S 7/8 7/8" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.00" Dia., 6.93 LengthC-305-S 5/8 5/8" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.00" Dia., 9.25 LengthC-306-S 3/4 3/4" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.00" Dia., 9.65 LengthC-307-S 7/8 7/8" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.00" Dia., 9.80 LengthC-309-S 1-1/8 1-1/8" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.00" Dia., 9.75 LengthC-417-S 7/8 7/8" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.50" Dia., 9.81 LengthC-419-S 1-1/8 1-1/8" Suction Line Type - ODF Solder Catch-All Sealed Filter Drier, 3.50" Dia., 9.75 Length




Refrigeration ComponentsMoisture and Liquid IndicatorParkerMale Flare

Features: One Indicator for Refrigerants 134a, 22, 404A, 407C, 410A, 502 and 507. Reliable and Accurately calibrated color change points. Color Changes are easily distinguished and reversible. Large full view sightglass. Indicator protected from discoloration and dirt. Replaceable indicator element. Disassembly of the smaller sizes not required. A double duty plastic cap is supplied to keep the glass free from dust, dirt and grease.

Part Number Connection Size (In) Overall Length (In) DescriptionSA-12 1/4 2.87 1/4" Male SAE Flare, See-All Moisture and Liquid IndicatorSA-13 3/8 3.37 3/8" Male SAE Flare, See-All Moisture and Liquid IndicatorSA-14 1/2 3.81 1/2" Male SAE Flare, See-All Moisture and Liquid IndicatorSA-15-FLARE 5/8 4.13 5/8" Male SAE Flare, See-All Moisture and Liquid Indicator

ODF SolderFeatures: One Indicator for Refrigerants 134a, 22, 404A, 407C, 410A, 502 and 507. Reliable and Accurately calibrated color change points. Color Changes are easily distinguished and reversible. Large full view sightglass. Indicator protected from discoloration and dirt. Replaceable indicator element. Disassembly of the smaller sizes not required. A double duty plastic cap is supplied to keep the glass free from dust, dirt and grease.

Part Number Connection Size (In) Overall Length (In) DescriptionSA-12S 1/4 4.62 1/4" ODF Solder, See-All Moisture and Liquid IndicatorSA-13S 3/8 4.62 3/8" ODF Solder, See-All Moisture and Liquid IndicatorSA-14S 1/2 4.87 1/2" ODF Solder, See-All Moisture and Liquid IndicatorSA-15S 5/8 4.87 5/8" ODF Solder, See-All Moisture and Liquid IndicatorSA-17S 7/8 6.31 7/8" ODF Solder, See-All Moisture and Liquid IndicatorSA-19S 1-1/8 6.31 1-1/8" ODF Solder, See-All Moisture and Liquid Indicator




Refrigeration ComponentsRefrigerantArkemaForane 22 Refrigerant

Features: Charging

Charging with R-22 can be done either as a vapor or a liquid. End-users should check with their equipment manufacturer's guidelines for specific charging instructions.

Properties & Performance: R-22 has properties making it a useful refrigerant in many air conditioning and refrigeration applications. R-22 is a single component, non-flammable, non-toxic refrigerant with an A1 ASHRAE safety rating.

Lubrication: R-22 works with mineral oil, alkylbenzene oil, or POE oil. End-users should check with the equipment manufacturers guidelines for specific oil selection directions.

Application: R-22 is used in a variety of applications, including residential and commercial air conditioning, refrigeration, chillers, room air conditioning, transport refrigeration, and other comfort cooling and refrigeration applications.

http://www.arkema-inc.com/index.cfm?pag=26

Boiling PointPart Number Appearance at 1 atm Normal Critical Temperature Odor DescriptionR22 Colorless

liquefied gas-41.4°F/-40.

8°C-41.5°F 205.1°F Faint, ether-like

odorForane 22 Refrigerant

Forane 134A RefrigerantFeatures: Properties & Performance: R-134a is designed to meet the needs of many air conditioning and medium temperature refrigeration systems. R-134a is a single component refrigerant rated A1 by ASHRAE (lowest levels of toxicity and flammability), having

zero ozone depletion potential. Lubrication: POE or PAG (for auto A/C only) lubricants must be used with R-134a since it is not miscible with mineral oil or

alkylbenzene lubricants found in many systems. Special care must be taken when using POE or PAG oils due to their hygroscopicity (moisture absorption) when

left exposed to the atmosphere. When retrofitting, a lubricant flush procedure is necessary to reduce the original oil content below 5% of the total oil charge.

New R-134a equipment will be charged with the OEM recommended lubricant, ready to use with R-134a. Charging: Charging with R-134a can be done either as a vapor or a liquid. End-users should check with their equipment

manufacturers guidelines for specific charging instructions. Retrofit: R-134a can be used to retrofit certain, existing R-12 systems. Applications include refrigeration, automotive A/C,

and many commercial A/C systems. Applications: Applications include automotive air conditioning, chillers, medium temperature commercial refrigeration,

refrigeration appliances, and transport refrigeration. Compressor and system manufacturers are selling new equipment specifically designed for R-134a. In addition,

Arkema’s laboratory testing and field trials have indicated R-134a will work in the retrofit of many existing R-12 and R-500 installations.


Boiling Point Part Number Appearance at 1 atm Normal Critical Temperature Odor DescriptionR134A Colorless

liquefied gas -15.1°F/-26.

2°C-14.9°F 213.9°F Faint, ether-like

odorForane 134A Refrigerant




Refrigeration ComponentsRefrigerantArkemaForane 404A Refrigerant

Features: Properties & Performance: R-404A is designed to meet the needs of many new and existing refrigeration systems. R-404A is near azeotropic HFC refrigerant blend rated A1 by ASHRAE (lowest levels of toxicity and flammability)

having zero ozone depletion potential. Lubrication: R-404A is immiscible with the traditional lubricants used in R-502 systems. As such, the original oil should be

replaced with POE when retrofitting to R-404A, and the presence of the old oil should be reduced to 5% or less of the original charge.

Failure to do so may result in inadequate oil return or other system problems. Charging: Due to the zeotropic nature of R-404A, it should be charged as a liquid to prevent fractionation (changes in

refrigerant composition due to vapor charging. In situations where vapor is normally charged into a system, a valve should be installed in the charging line to flash the liquid to vapor during charging.

Testing shows that fractionation due to system leaks is typically not a problem for R-404A. Fix the leak and top off the charge.

Retrofit: R-404A can be used to retrofit many existing R-502 systems. The physical and thermodynamic properties of the blend cause it to behave much like R-502 when used as a

retrofit but it is not intended to be a direct “drop-in” for R-502 systems. Due to higher operating pressures associated with the use of R-404A as opposed to R-502, OEM product specific retrofit recommendations should be consulted for any and all pressure relief modifications and/or requirements.

Application: R-404A is formulated to closely match the properties of R-502, making it useful for a variety of medium and low

temperature refrigeration applications. R-404A has been approved by many refrigeration compressor and system manufacturers for use in new

refrigeration equipment such as food display and storage cases, cold storage rooms, ice machines, transportation, and process refrigeration.


Boiling PointPart Number Appearance at 1 atm Normal Critical Temperature Odor DescriptionR404A Colorless

liquefied gas -51.0 to -

49.8°F/46.1to –45.4°C

-51.2°F 161.7°F Faint, ether-likeodor

Forane 404A Refrigerant




Refrigeration ComponentsRefrigerantArkemaForane 407C Refrigerant

Features: Properties & Performance: R-407C is designed to meet the needs of many new and existing air conditioning and refrigeration systems. R-407C is a zeotropic HFC refrigerant blend, rated A1 by ASHRAE (lowest levels of toxicity and flammability)

having zero ozone depletion potential. Lubrication: POE lubricants must be used with R-407C since its components are not miscible with the mineral oil or

alkylbenzene lubricants found in most R-22 systems. When retrofitting, a lubricant flush procedure is necessary to reduce the original oil content below 5%.

New R-407C equipment will be charged with the OEM recommended lubricant, ready to use with R-407C. Charging: Due to the zeotropic nature of R-407C, it should be charged as a liquid to prevent fractionation (changes in

refrigerant composition due to vapor charging). In situations where vapor is normally charged into a system, a valve should be installed in the charging line to flash the liquid to vapor while charging.

Retrofit: R-407C can be used to retrofit existing R-22 systems in positive displacement, direct expansion refrigeration, and

air conditioning equipment. R-407C should not be used in centrifugal chillers or other equipment that uses a flooded evaporator due, to its

high temperature glide. Application: Applications include residential and commercial air conditioning systems, non-flooded evaporator chillers, and

some commercial refrigeration systems. Since R-407C has similar properties to R-22, it is possible (with modifications) to use it in the same equipment designed for R-22 today.


Boiling PointPart Number Appearance at 1 atm Normal Critical Temperature Odor DescriptionR407C Colorless

liquefied gas-46.4 to -

33.9°F/-43.6 to–36.6°C

-46.5°F 186.9°F Faint, ether-likeodor

Forane 407C Refrigerant





Features: Properties & Performance: When retrofitting from R-502 to R-408A, system capacity and efficiency often improve. Both low and high side

pressures are nearly identical for R-502 and R-408A. An increase in head pressures of 5 psi may be seen in high ambient environments with R-408A. Lubrication: R-408A can be used with mineral oil, alkylbenzene, or POE lubricants. Systems operating with R-502 and mineral oil and showing adequate lubricant return to the compressor may

continue to use mineral oil with R-408A. Alkylbenzene and/or POE may be used alone or in combination with mineral oil in order to improve lubricant miscibility and return to the compressor.

Charging: Due to the zeotropic nature of the R-408A blend, it should only be charged as liquid to prevent fractionation

(changes in designed refrigerant composition). In situations where vapor would normally be charged into a system, a valve should be installed in the charging line to flash liquid from the cylinder into vapor.

Charging weight ratios of R-408A are typically 85-90% of the charge weight of R-502. Retrofit: System components (TXVs, line sizes, compressors) offer similar performance with R-502 and R-408A and

usually do not require changing when retrofitting. Application: R-408A is a retrofit solution for medium and low temperature refrigeration systems that are currently using R-502.

R-408A should not be mixed with R-502 or used to top off the charge of an existing system operating on R-502. R-408A is not intended for use in new equipment. Refrigeration applications that were previously designed to use

R-502 can now be specified to use a long-term alternative HFC blend, such as R-404A.Manufacturers have developed new R-404A compressors and refrigeration systems for use in food display and storage cases, cold storage rooms, ice machines, transportation, and process refrigeration.


Part Number Appearance CriticalTemperature

Normal BoilingPoint

Odor Description

R408A Colorless liquefied gas 181.7°F -48.2°F Faint, ether-like odor Forane 408A Refrigerant





Features: Properties & Performance: R-409A has properties and performance similar to R-12 and R-500. Low side pressures are similar to those of R-12, while high side pressures will typically be 15 to 25 psi higher.

Equal or better heat transfer characteristics are usually obtained when retrofitting from R-12 to R-409A Lubrication: R-409A works well with the MO or AB found in R-12 or R-500 systems, and typically does not require an oil

change. For low temperature, mineral oil based R-12 applications (evaporator temperatures less than 0°F), a partial oil change (at least 30%) to alkylbenzene is recommended. R-409A is fully miscible with AB and POE oils.

Charging: Due to the zeotropic nature of R-409A, it should be charged as a liquid to prevent fractionation (changes in

refrigerant composition due to vapor charging). In situations where vapor is normally charged into a system, a valve should be installed in the charging line to flash the liquid to vapor while charging.

Charging weight ratios of R-409A are usually 85 - 90% of the charge weight of R-12. Retrofit: R-409A is the recommended retrofit for R-12 and R-500 stationary DX systems, where an oil change to POE is not

practical. R-409A is not recommended for use in automotive air conditioning system, or systems that utilize a flooded

evaporator (i.e. centrifugal chillers). For these systems, R-134a is the recommended retrofit product. Application: Applications include many medium temperature refrigeration systems, vending machines, refrigerators, positive

displacement chillers, humidifiers, and other systems using R-12 or R-500.



Normal BoilingPoint

Odor Description

R409A Colorless liquefied gas 228.7°F -30°F Faint, ether-like odor Forane 409A Refrigerant





Features: Properties & Performance: R-410A is a near-azeotropic HFC refrigerant blend that meets the industry’s needs for many new air conditioning

systems. R-410A has received an A1 safety rating from ASHRAE (lowest levels of toxicity and flammability) having zero

ozone depletion potential. R-410A is a higher pressure and capacity refrigerant than R-22, requiring equipment and components specifically

designed to accommodate the resulting higher system pressures and lower flow rates needed. Typical operating pressures of an R-410A system will be 50% to 60% higher than those in an R-22 system at comparable operating conditions.

R-410A also has significantly higher volumetric refrigerating capacity than R-22 under most operating conditions. This allows OEMs to manufacture equipment of similar capacity and efficiency to R-22 in a smaller package. Lubrication: To ensure proper oil return, R-410A is typically used with polyolester (POE) oil. The HFC components of R-410A are not miscible with mineral oil or alkylbenzene. Manufacturers provide new R-

410A systems and compressors already charged with the appropriate lubricant. Care must be taken when handling POE lubricants because they are hygroscopic, which means that they can readily absorb moisture from the air.

This is especially a concern when handling POEs in humid environments. High levels of moisture in the system can lead to oil degradation and system failure.

Charging: Due to the zeotropic nature of the R-410A blend, it should only be charged as liquid to prevent fractionation

(changes in the designed refrigerant composition). In situations where vapor would normally be charged into a system, a valve should be installed in the charging line to flash liquid from the cylinder into vapor. Never introduce liquid into a running system, as compressor damage may result. R-410A requires the use of manifold gauge sets, recovery machines and cylinders specifically designed and rated for its higher pressures.

Retrofit: Due to the significantly higher operating pressures and capacities of R-410A, it should never be used as a retrofit

for R-22 systems. R-410A should only be used with equipment designed specifically for use with R-410A. Application: Forane 410A refrigerant is used in new residential and commercial air conditioning systems, heat pumps,

dehumidifiers and small chillers. R-410A is also being considered in some medium temperature refrigeration applications.



Normal BoilingPoint

Odor Description

R410A Colorless liquefied gas 160.4°F -60.6°F Faint, ether-like odor Forane 410A Refrigerant

ICORClean Shot System Flush

http://www.icorinternational.com/products.html

Part Number Color Odor Physical Form Solubility Vapor Pressure DescriptionClean Shot Clear Slight odor ether Liquid Slightly H2O soluble 12 psi @ 66°F/19°C Clean Shot Refrigerant




Refrigeration ComponentsRefrigerantICORHot Shot

Features: Benefits HOT SHOT is the number ONE R-12 replacement No TEV or cap tube replacement No oil change to AB or POE Can be topped off after leak has been repaired Widespread availability Applications R-12 and 134a low, medium and high temp refrigeration. R-12 and 500 air conditioning R-12 and 134a auto A/C Oils MO, AB, POE, PVE and PAG Direct Replacement for Refrigerants 12, 134a, 500, 401A/B, 409A, 416A, 420A, 426A, 437A


Density Part Number Color Liquid @ 1

atmVapor @ 1

atmOdor pH Molecular

WeightDescription

Hot Shot Colorless 86.95 lb/ft3 .32255 lb/ft3 Slightly ethereal Neutral 101.59 g/mol Hot Shot Refrigerant

Technical Information ASHRAE Designation 414B Environmental Classification HCFC ASHRAE Standard 34 Safety Classification A1 EPA/SNAP Accepted (S=Stationary M=Mobile) S,M Ozone Depletion Potential 0.043 Global Warming Potential 1339 Oil Compatibilty All Molar Mass lbm/lbmol 101.59 Normal Boiling Point (1 atm, ºF) -27.16 Critical Pressure (psia) 665.96 Critical Temperature (ºF) 231.79 Critical Density (lbm/ft3) 31.68 Liquid Density (70 ºF, lbm/ft3) 76.64 Vapor Density (NBP, lbm/ft3) 0.2219 Temperature Glide (NBP) 15 Temperature Glide (100 ºF) 12 Pounds Per Gallon (70 ºF) 10.24 Maximum Moisture (ppm) 10 Maximum Non-Condensables (% vol) 1.5 Maximum High Boiling Impurities (% vol) 0.01 Recommended Maximum Exposure Limits in Air ppm) 1000 R-22 (% Weight) 50 R-600a (% Weight) 1.5 R-124 (% Weight) 39 R-142b (% Weight) 9.5




Refrigeration ComponentsRefrigerantICORHot Shot 2

ASHRAE Designated R-417C Features: Benefits No TEV or cap tube replacement No oil change to AB or POE Can be Topped off after leak has been repaired Widespread availability Applications R-12 and 134-a low, Medium and High Temp refrigeration R-12 and 500 air conditioning Oils MO, AB, POE, PVE and PAG Direct Replacement for refrigerants 12, 134a, 500, 401 A/B, 409A, 4148, 416A, 420A, 426A, 437, & 414A in most applications


Part Number DescriptionHot Shot 2 Hot Shot 2 Refrigerant

Technical Information

Environmental classifications HFC EPA/SNAP Accepted (S=Stationary) S Ozone Depletion Potential 0 Global warming Potential 1820 Oil Compatibility All Molar Mass Ibm/Ibmol 103.73 Normal Boiling Point (1 atm, °F) -26.65 Critical Pressure (Psia) 590.85 Critical Temperature (°F) 203.7 Critical Density (Ibm/ft3) 32.12 Liquid Density (70°F, Ibm/ft3) 74.6 Vapor Density (NBP, Ibm/ft3) 0.2893 Temperature Glide(NBP) 6 Temperature Glide (100°F) 4 Pounds per Gallon (70°F) 9.97 Maximum Moisture (ppm) 10 Maximum Non-Condensables (% vol) 1.5 Maximum High Boiling impurities (% Vol) 0.01 Recommended Maximum Exposure Limits in Air (ppm) 1000 R-125 (% Weight) 19.5 R-134a (% Weight) 78.8 R-600 (% Weight) 1.7




Refrigeration ComponentsRefrigerantICORNU22B

Features: Benefits Lower Retrofit costs no POE oil changes No Line set Changes Can be topped off after leak has been repaired Enables continued use of existing equipment Can use R-22 TEV and power element Widespread availability Applications R-22 Residential air conditioning and heat pumps R-22 and 407C Commercial air conditioning and Heat pumps R-22 Medium and High Temp Refrigeration Oils MO, AB, POE and PVE Direct Replacement for Refrigerants 22, 407C, 417A, 421A, 422D, 424A, 427A, 434A, 438A


DensityPart Number Color Liquid @ 1

atmVapor @ 1

atmOdor pH Molecular

WeightDescription

NU22B Colorless 87.25 lb/ft3 .3633 lb/ft3 Slight odor ether Neutral 108.53 g/mol NU22B RefrigerantTechnical Information ASHRAE Designation 422B Environmental Classification HFC ASHRAE Standard 34 Safety Classification A1 EPA/SNAP Accepted (S=Stationary M=Mobile) S,M Ozone Depletion Potential 0 Global Warming Potential 2500 Oil Compatibilty All Molar Mass lbm/lbmol 108.52 Normal Boiling Point (1 atm, ºF) -42.35 Critical Pressure (psia) 574.07 Critical Temperature (ºF) 181.79 Critical Density (lbm/ft3) 32.86 Liquid Density (70 ºF, lbm/ft3) 73.053 Vapor Density (NBP, lbm/ft3) 0.2817 Temperature Glide (NBP) 10 Temperature Glide (100 ºF) 5 Pounds Per Gallon (70 ºF) 9.76 Maximum Moisture (ppm) 10 Maximum Non-Condensables (% vol) 1.5 Maximum High Boiling Impurities (% vol) 0.01 Recommended Maximum Exposure Limits in Air (ppm) 1000 R-22 (% Weight) 55 R-134a (% Weight) 42 R-600a (% Weight) 3




Refrigeration ComponentsSystem ProtectorsEmersonAccumulatorsA-AS Suction Accumulators

Features: Designed to operate in a range of +40°F to -40°F evaporator temperature Fusible plug on larger diameter units Solid copper connections Corrosion resistant epoxy powder paint finish Inlet deflector directs refrigerant flow to prevent internal splashing and aid in

the collection of refrigerant oil The A-AS protects the compressor from liquid slugging and is used with CFC,

HCFC, and HFC refrigerants. It is available for systems through 28 tons nominal capacity. UL/CUL file number: SA 10225

Part Number A Fitting Size(Nominal) (In)

B Diameter(In)

C Height(In)

D FittingSeparation

(In)

Weight(lbs)

Description

A-AS464 1/2 4.0 6.0 2.5 2.80 4" Dia. x 6" H, A-AS Suction Accumulators, 1/2" Fitting SizeA-AS4 10 5 5/8 4.0 10.0 2.5 4.60 4" Dia. x 10" H, A-AS Suction Accumulators, 5/8" Fitting SizeA-AS4 10 6 3/4 4.0 10.0 2.5 4.60 4" Dia. x 10" H, A-AS Suction Accumulators, 3/4" Fitting SizeA-AS5137 7/8 5.0 13.0 2.75 7.10 5" Dia. x 13" H, A-AS Suction Accumulators, 7/8" Fitting SizeA-AS5139 1-1/8 5.0 13.0 2.75 7.10 5" Dia. x 13" H, A-AS Suction Accumulators, 1-1/8" Fitting SizeA-AS6139 1-1/8 6.0 13.0 2.94 11.70 6" Dia. x 13" H, A-AS Suction Accumulators, 1-1/8" Fitting SizeA-AS61411 1-3/8 6.0 14.0 2.94 12.10 6" Dia. x 14" H, A-AS Suction Accumulators, 1-3/8" Fitting SizeA-A6S62513 1-5/8 6.0 25.0 2.94 22.60 6" Dia. x 25" H, A-AS Suction Accumulators, 1-5/8" Fitting Size

Liquid Line Hermetic Filter DriersBFK Liquid Line Bi-Directional Filter Drier

Features: Internal check valves allow flow and filtration in either direction, eliminates

need for external check valves High moisture and acid removal capacity Corrosion resistant epoxy powder paint finish Copeland brand products approved for POE oils Desiccant Blend: optimized for high water capacity and acid capacity The BFK is a solid core, bi-directional, liquid line Filter Drier for heat pump

applications for use with CFC, HCFC, and HFC refrigerants.

DimensionsPart Number Connection

Size (In)A (In) B (In) C (In) D (In) E (In) Weight

(lbs)Description

BFK-083S 3/8 5.29 3.82 4.48 2.62 0.40 1.00 3/8" ODF, 08 Cu.in. Unit Size BFK Liquid LineBi-Directional Filter Drier, R410A

BFK-163S 3/8 6.08 4.61 5.28 3.15 0.40 2.00 3/8" ODF, 16 Cu.in. Unit Size BFK Liquid LineBi-Directional Filter Drier, R410A




Refrigeration ComponentsSystem ProtectorsEmersonLiquid Line Hermetic Filter DriersEK Liquid Line Filter Drier

Features: Filtration first for more effective use of surface area of desiccant High moisture and acid removal capacity Solid copper connections Corrosion resistant epoxy powder paint finish Copeland® brand products approved for POE Oils Shock resistant steel shell construction Desiccant blend - optimized for high water capacity and acid capacity The EK Liquid Line Filter Drier is a premium compacted bead Filter Drier with

a 20 micron outlet pad for maximum filtration. The EK is a premium universal replacement liquid line Filter Drier for CFC,

HCFC and HFC refrigerants including R-12, R-134a, R-22, R-404A, R-407C, R-410A, R-500, R-502, and R-507.

DimensionsPart Number Connection

Size (In)A (In) B (In) D (In) E (In) F (In) Weight

(lbs)Description

EK-032S 1/4 3.88 3.13 0.38 2.56 1.63 0.50 1/4" ODF, 03 Cu.in. Unit Size EK Liquid Line Filter Drier, R410AEK-052S 1/4 4.44 3.69 0.38 3.00 2.63 0.88 1/4" ODF, 05 Cu.in. Unit Size EK Liquid Line Filter Drier, R410AEK-053S 3/8 4.50 3.63 0.44 3.00 2.63 0.88 3/8" ODF, 05 Cu.in. Unit Size EK Liquid Line Filter Drier, R410AEK-082S 1/4 5.25 4.50 0.38 3.81 2.63 1.25 1/4" ODF, 08 Cu.in. Unit Size EK Liquid Line Filter Drier, R410AEK-164S 1/2 6.31 5.31 0.50 4.75 2.63 1.25 1/2" ODF, 16 Cu.in. Unit Size EK Liquid Line Filter Drier, R410AEK-303S 3/8 9.00 8.13 0.44 7.50 3.06 3.75 3/8" ODF, 30 Cu.in. Unit Size EK Liquid Line Filter Drier, R410AEK-304S 1/2 9.13 8.13 0.50 7.50 3.06 3.75 1/2" ODF, 30 Cu.in. Unit Size EK Liquid Line Filter Drier, R410AEK-305S 5/8 9.31 8.06 0.63 7.50 3.06 3.75 5/8" ODF, 30 Cu.in. Unit Size EK Liquid Line Filter Drier, R410AEK-415S 5/8 9.44 8.19 0.63 7.63 3.69 4.75 5/8" ODF, 41 Cu.in. Unit Size EK Liquid Line Filter Drier, R410A




Refrigerant & Refrigeration Parts 23

Tools & TestInstruments

SPRING/SUMMER 2013


Tools and Test InstrumentsBitsLenoxHole Saw ArborsStandard Hole Saw Arbor

Features: Added durability: hardened carbon steel for strength Starts on contact: split point pilot drill for faster penetration and less walking

http://www.lenoxtools.com/Pages/Home.aspx

ShankPart Number Size Size Type Fits Hole Saws Description1779801 1-1/4-6" 1/2" & larger Hex 20L-96L Standard Hole Saw 2L Arbors for Enlarging Holes, Adjustable Pilot Bit

Metal Drill BitsVari-Bit Step Drill Bits

Features: Accurate, Burr-Free Holes: patented two flute design cuts fast, clean, round holes Starts on Contact: split point design for faster penetration and less walking Long Tool Life: steam oxide coating adds durability enhanced flute design removes chips rapidly Use of Lenox Protool Lube recommended to extend tool life


Part Number No. of Steps Shank Size Description30881VB1 13 1/4" Vari-Bit Step Drill Bits, 1-Pack, 13 Of Steps, 1/4" Shank Size30882VB2 9 3/8" Vari-Bit Step Drill Bits, 1-Pack, 9 Steps, Hole Size Range 1/2" to 1"30883VB3 9 3/8" Vari-Bit Step Drill Bits, 1-Pack, 9 Steps, Hole Size Range 1/4" to 3/4"

Vari-Bit Step Drill Bits - 6 Piece KitPart Number Description30927VBKA6 6 Piece Vari-Bit Step Drill Bits Kit, VB1, VB2, VB6, VB7, VB8, VB11 Compact Kit

Wood Drill BitsBi-Metal Self-Feed Wood Drill Bits

Features: Extreme durability: high speed steel cutting edge for superior durability in nail-embedded wood stays

sharper longer Clean holes and easy removal: chamfered edge allows bit to be removed easily after drilling flutes

remove excess wood chips Fast, easy drilling: aggressive lead screw tip pulls the bit through material quickly and effortlessly Increased value: extra lead screw and wrench included in every package Deeper cuts: longer shank that cuts 4"x4" without extension Quick change: impact hex shank allows for quick changing out bits


Entrance ForPart Number Pipe & Rigid Conduit Tubing Diameter Description1787566 2" 2-1/2" 2"-9/16" Bi-Metal Self-Feed Wood Drill Bits, 2-9/16" Diameter



1 Tools & Test Instruments 1

Tools and Test InstrumentsBladesLenoxHacksaw Blades88300 Hacksaw

Features: High tension: saw will tension up to 20,000 psi Easily adjust tension: front tension mechanism is easy to hold and adjust Ergonomic grip: front handle grip reduces fatigue in continuous cutting applications Multi-purpose: mount blade at 90° for flush cutting applications All hacksaw frames come with one 12" (300mm) 24 TPI hacksaw blade


Part Number Description1213188300 General Purpose Cutting 88300 Hacksaw

HT50 Hacksaw FrameFeatures: Unique I-Beam Construction: allows blade to tension up to 50,000 psi, resulting in fast, straight cuts Convenient Blade Storage: no tool needed to store up to 5 extra blades Convert to a Jab Saw: accepts any Lenox reciprocating saw blade Comfortable Grips: rubberized handles allow for confident handling even in wet or cold environments All hacksaw frames come with one 12" (300mm) 24 TPI hacksaw blade


Part Number Description12132HT50 High Tension Metal Cutting HT50 Hacksaw Frame

T2 Technology Bi-Metal Hacksaw BladesFeatures: T2 technology: a revolutionary new blade design that delivers up to 100% longer blade life versus the

prior generation of Lenox hacksaw blades Shatter-resistant: bi-metal construction allows blades to bend and flex without breaking


Part Number Length X Width TPI Description20150S018HE 10" x 1/2" 18 T2 Technology Bi-Metal Hacksaw Blades, Heavy Metal, 1-Pack, 18 TPI, 10" x 1/2"20154S218HE 12" x 1/2" 18 T2 Technology Bi-Metal Hacksaw Blades, Heavy Metal, 1-Pack, 18 TPI, 12" x 1/2"20151S024HE 10" x 1/2" 24 T2 Technology Bi-Metal Hacksaw Blades, Medium Metal, 1-Pack, 24 TPI, 10" x 1/2"

Hole Saw KitsContractor Hole Saw Kits - Model-1815140

Part Number Description1815140 NEW! 7 Piece Mini Contractor Hole Saw Kit 7/8", 1", 1-1/8", 1-1/2", 2-1/8", Snap-Back Arbors: 2L, 5L




Tools and Test InstrumentsBladesLenoxReciprocating Saw BladesGeneral Purpose Bi-Metal Reciprocating Blades

Features: Long life: Patented tooth design provides long blade life Efficient cutting: Optimized for specific applications Durable construction: Shatter resistant, bi-metal design provides the flexibility and durability

single-metal blades can‘t


Part Number Length X Width X Thickness Packaging Description20580 8" x 3/4" x 0.050" 5 per Pack Bi-Metal Recip Blade, 5-Pack, 10 TPI, 8" x 3/4" x 0.050"20583 12" x 3/4" x 0.050" 5 per Pack Bi-Metal Recip Blade, 5-Pack, 10/14 TPI, 12" x 3/4" x 0.050"

Medium Carbide Grit Recip BladeFeatures: Master Grit carbide grit edge reciprocating saw blades Super hard cutting edge easily cuts through abrasive materials The less aggressive cutting edge smoothly cuts through materials Cuts certain materials more effectively than bi-metal blades, soil pipe, cast iron, plywood, ceramic

wall tile, brick, carbon, fiberglass, epoxies, plaster, melamines, cement, laminates, marble, hardwood floor


Part Number Length X Width X Thickness Packaging Description20576 10.5" x 0.4" x 2" 2 per Pack 8" Medium Carbide Grit RecipBlade - 2 Pack, 10.5" x 0.4" x 2"

Metal - Bi-Metal Reciprocating BladesFeatures: Extended blade life: LENOX T2 metal cutting reciprocating saw blades use an optimized, reinforced

tooth geometry Engineered for performance: The patent pending design minimizes friction and heat build-up while

cutting through the widest variety of metal materials Durable construction: Bi-metal design stands up to the most demanding applications


Part Number Length X Width X Thickness Packaging Description20564 6" x 3/4" x 0.035" 5 per Pack Bi-Metal Recip Blade, 5-Pack, 14 TPI, 6" x 3/4" x 0.035"20566 6" x 3/4" x 0.035" 5 per Pack Bi-Metal Recip Blade, 5-Pack, 18 TPI, 6" x 3/4" x 0.035"20568 6" x 3/4" x 0.035" 5 per Pack Bi-Metal Recip Blade, 5-Pack, 24 TPI, 6" x 3/4" x 0.035"20578 8" x 3/4" x 0.035" 5 per Pack Bi-Metal Recip Blade, 5-Pack, 18 TPI, 8" x 3/4" x 0.035"




Tools and Test InstrumentsBladesLenoxReciprocating Saw BladesWood - Bi-Metal Reciprocating Blades

Features: Extended blade life: LENOX T2 wood cutting reciprocating saw blades use an optimized, reinforeced

tooth geometry Durable construction: Bi-metal design stands up to the most demanding applications Plunge cutting: The 656R features Rapid Plunge for faster, easier plunge cuts


Part Number Length X Width X Thickness Packaging Description20572 6" x 3/4" x 0.050" 5 per Pack Bi-Metal Recip Blade for Nail-Embedded Wood, Wood, 5-Pack, 6

TPI, 6" x 3/4" x 0.050"20582 9" x 3/4" x 0.050" 5 per Pack Bi-Metal Recip Blade, 5-Pack, 6 TPI, 9" x 3/4" x 0.050"

Specialty Reciprocating Saw BladesDiamond Reciprocating Blade

Features: Lasts 3 x Longer* - Nickel alloy brazed diamond particles maintain sharpness to keep cutting after

conventional carbide grit fail. Cuts 3 x Faster** - A narrow kerf design enables thinner, faster cuts. Straight, Clean Cuts - Unlike bulky snap cutters, which crush pipes and leave ragged, uneven cuts,

Lenox Diamond cuts clean. Durable chrome alloy backing steel provides extra stability.


Part Number Length X Width X Thickness Packaging Description10833 8" x 3/4" x 0.040" 1 per Pack Diamond Recip Blade, 1-Pack, 8" x 3/4" x 0.040"Notes: Test conducted using standard 8" and 9" carbide grit blades vs. LENOX Diamond cutting 4" cast iron pipe in laboratory testing ** Speed measured cutting 4" cast iron pipe at maximum speed vs. leading competitor

MilwaukeeHacksaw BladesHack Saw Blades - 14 TPI

Milwaukee Super-Tough Bi-Metal Hack Saw Blades outlast conventional blades up to 3 times longer, which requires fewer blade changes. Ideal for cutting heavy bars, large sections of steel, aluminum and large diameter hard materials Features: Bi-metal for greater durability For cutting common materials 3/8" thick and up Fits most 12" hack saw frames

http://www.milwaukeetool.com

Part Number Dimensions Packaging TPI Description48-43-0600 12" x 1/2" x .025" 10" 14 12" Hack Saw Blades, 10-Pack, 14 TPI




Tools and Test InstrumentsBladesMilwaukeeHacksaw BladesHack Saw Blades - 24 TPI

Milwaukee Super-Tough Bi-Metal Hack Saw Blades outlast conventional blades up to 3 times longer,which requires fewer blade changes. Ideal for cutting angle iron, pipe, brass and small section steel Features: Bi-metal for greater durability For cutting common materials 1/8" - 3/8" thick Fits most 12" hack saw frames


Part Number Dimensions Packaging TPI Description48-43-0620 12" x 1/2" x .025" 10 24 12" Hack Saw Blades, 10-Pack, 24 TPI

Sawzall BladesGeneral Purpose Sawzall Blades - Standard

Milwaukee designs and manufactures Sawzall blades for the toughest professional applications. Material, blade geometry and heat treating are designed to maximize general purpose cutting performance. Features: Double relief angle reduces tooth stress for long life Precision forming process creates sharper teeth for fast cutting Matrix II bi-metal teeth for greater durability


Part Number Dimensions Packaging TPI Description48-00-5094 12" x 3/4" x .050" 5 8/12 12" Standard General Purpose Sawzall Blade, 5-Pack, 8/12 TPI

General Purpose Sawzall Blades - The Wrecker DemolitionThe Wrecker is ideal for general purpose demolition cutting. It will deliver exceptional durability in a wide range of materials, including ferrous and non-ferrous metals, plastics, and nail-embedded wood. Features: A precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting

blade A complete, unset raker tooth on the blade tip allows for easier, faster plunging by minimizing walking

and bouncing A thicker, more rigid blade body resists fracturing and bending for maximum durability The 1" tall blade body reduces blade twisting for straighter, more accurate cuts Matrix II bi-metal teeth for greater durability


Part Number Dimensions Packaging TPI Description48-00-5711 12" x 1" x .062" 5 8 12" The Wrecker General Purpose Sawzall Blade, 5-Pack, 8 TPI




Tools and Test InstrumentsBladesMilwaukeeSawzall BladesIce Hardened Sawzall Blades

Ice Hardened blades are cryogenically treated to minimize soft metal (austenite) and create morehard metal (martensite). The result is a metal cutting blade that is more consistently hard throughout, for up to 50% longer life than standard blades. Features: Ice Hardened for up to 50% longer life, Matrix II bi-metal teeth for greater durability A unique combination of relief angles forms a radius on the back of the tooth that reduces stress build-up during cutting and substantially extends blade life Precision forming process creates sharper teeth for fast cutting


Part Number Dimensions Packaging TPI Description48-00-4091 6" x 3/4" x .050" 5 8/12 6" Ice Hardened Sawzall Blade, 5-Pack, 8/12 TPI48-00-4093 8" x 3/4" x .050" 5 8/12 8" Ice Hardened Sawzall Blade, 5-Pack, 8/12 TPI48-00-4186 6" x 3/4" x .035" 5 24 6" Ice Hardened Sawzall Blade, 5-Pack, 24 TPI

Ice Hardened Sawzall Blades - The TorchIce Hardened blades are cryogenically treated to minimize soft metal (austenite) and create more hard metal (martensite). The result is a metal cutting blade that is more consistently hard throughout, for up to 50% longer life than standard blades. Features: Ice Hardened for up to 50% longer life., Matrix II bi-metal teeth for greater durability A unique combination of relief angles forms a radius on the back of the tooth that reduces stress

build-up during cutting and substantially extends blade life Precision forming process creates sharper teeth for fast cutting A thicker, more rigid blade body resists fracturing and bending for maximum durability The 1" tall blade body reduces blade twisting for straighter, more accurate cuts


Part Number Dimensions Packaging TPI Description48-00-4712 6" x 1" x .042" 5 10 6" The Torch Ice Hardened Sawzall Blade, 5-Pack, 10 TPI

Metal Cutting Sawzall Blades - The Torch DemolitionThe Torch delivers exceptional durability and straighter cuts in pipe, conduit, strut and other metal materials. Features: A unique combination of relief angles forms a radius on the back of the tooth that reduces stress build-up during cutting and substantially extends blade life , Matrix II bi-metal teeth for greater

durability A precise manufacturing process creates a sharper cutting edge on each tooth for a faster cutting

blade A thicker, more rigid blade body resists fracturing and bending for maximum durability The 1" tall blade body reduces blade twisting for straighter, more accurate cuts


Part Number Dimensions Packaging TPI Description48-00-5712 6" x 1" x .042" 5 10 6" The Torch Metal Cutting Sawzall Blade, 5-Pack, 10 TPI48-00-5713 9" x 1" x .042" 5 10 9" The Torch Metal Cutting Sawzall Blade, 5-Pack, 10 TPI48-00-5789 12" x 1" x .042" 5 18 12" The Torch Metal Cutting Sawzall Blade, 5-Pack, 18 TPI




Tools and Test InstrumentsBladesMilwaukeeSawzall BladesWood Cutting Sawzall Blades - Standard

Milwaukee wood cutting Sawzall blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wood blade on the market. Features: Nail guard Ordinary teeth deliver either speed or durability. Nail guard solves this trade-off with an

aggressive 5 TPI pattern for faster cuts and a unique design that protects against tooth fracture Fang tip Ordinary tips bounce or skate on the work piece. Fang tip bites into the wood on first contact Matrix ii bi-metal teeth for greater durability


Part Number Dimensions Packaging TPI Description48-00-5035 6" x 3/4" x .050" 5 5 6" Standard Wood Cutting Sawzall Blade, 5-Pack, 5 TPI48-00-5037 6" x 3/4" x .050" 5 5 12" Standard Wood Cutting Sawzall Blade, 5-Pack, 5 TPI

Wood Cutting Sawzall Blades - The Ax DemolitionThe Ax Sawzall blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wood demol ition blade on the market. Features: Nail guard Ordinary teeth deliver either speed or durability. Nail guard solves this trade-off with an

aggressive 5 TPI pattern for faster cuts and a unique design that protects against tooth fracture Fang tip Ordinary tips bounce or skate on the work piece. Fang tip bites into the wood on first contact A thicker, more rigid blade body resists fracturing and bending for maximum durability The 1" tall blade body reduces blade twisting for straighter, more accurate cuts Matrix ii bi-metal teeth for greater durability


Part Number Dimensions Packaging TPI Description48-00-5021 6" x 1" x .062" 5 5 6" The Ax Wood Cutting Sawzall Blade, 5-Pack, 5 TPI

Instruments Cooper AtkinsBi-Metals0/220F Pocket Test Thermometer

Features: Bi-Metal Pocket Test features a red protective sheath with anti-microbial additive, adjustment tool

and pocket clip, Magnifying lens for easy reading,NSF certified Warranty: 1 Year

http://www.cooper-atkins.com/Products/

Part Number Dial Diameter Housing Material Temperature Range Description1246-02-1 1" Stainless Steel 0° to 220°F Bi Metal Pocket Test Thermometer 0 to 220°F




Tools and Test InstrumentsInstruments Cooper AtkinsBi-Metals12" HACCP Cooler/Freezer Thermometer

Features: The 212-159 Cooler/Freezer thermometer is brightly colored and features a 12" diameter It has a HACCP reference color-zoned dial and a large black pointer for ease in viewing This oversized wall thermometers allow easy monitoring of temperatures in critical food-related

locations, Bi-metal coil movement, Large black pointer makes viewing easy


Part Number Dial Diameter Humidity Description212-159-8 11-1/2" 0 to 100% RH 12" Freezer & Cooler Thermometer/Hygrometer with HACCP Color-zoned

12" Wall Thermometer / Humidity MeterFeatures: 212 Series Wall Thermometers are 12” in diameter and available for a variety of requirements that

increases employee awareness while monitoring temperature, Bi-metal coil movement Large black pointer makes viewing easy, Warranty: 1 Year


Part Number Dial Diameter Housing Material Humidity Description212-150-8 12" diameter x 1.25" ABS plastic, Plastic lens

with UV additive0 to 100% RH Indoor/Outdoor 12" Wall Thermometer/Hygrometer

-40/180F Pocket Test ThermometerFeatures: Bi-Metal Pocket Test features a red protective sheath with anti-microbial additive, adjustment tool

and pocket clip, Magnifying lens for easy reading,NSF certified Warranty: 1 Year


Part Number Dial Diameter Housing Material Temperature Range Description1246-01-1 1" Stainless Steel Stem -40° to 180°F Bi Metal Pocket Test Thermometer -40 to 180°F

Glass Stick Indoor/Outdoor Therm with Suction CupsFeatures: 268 Indoor/Outdoor thermometer has reversible suction cups for front or back mounting It is easily mounted on either walls or windows Non-toxic spirt filled glass tube, °F/°C Scale, Warranty: 1 Year


Part Number Dial Diameter Temperature Range Description268-0-8 7.5" x 2" -40° to 120°F Glass Stick Indoor/Outdoor Therm with Suction Cups




Tools and Test InstrumentsInstruments Cooper AtkinsBi-MetalsHACCP Professional Refrigerator/Freezer Dry Storage Thermometer

Features: The 25HP HACCP Professional Refrigerator/Freezer thermometer hangs or stands It features a HACCP reference dial NSF certified, Warranty: 1 Year


Part Number Dial Diameter Housing Material Description25HP-01-1 2" Stainless Steel HACCP Professional Refrigerator/Freezer Dry Storage Thermometer

Horizontal Glass Tube Refrigerator ThermometerFeatures: 335 Horizontal Glass Tube Refrigerator thermometer features magnifying lens and hangs, stands or permanently mounts, Magnifying lens Warranty: 1 Year, NSF certified


Part Number Dial Diameter Housing Material Description335-01-1 1.3" x 5" Stainless Steel Casing Horizontal Glass Tube Refrigerator Thermometer

Vertical Glass Tube Refrigerator/Freezer ThermometerFeatures: 330 Lightweight Refrigerator/Freezer thermometer It features a non-toxic spirit-filled glass hanging tube NSF certified, Warranty: 1 Year


Part Number Dimensions Housing Material Description330-01 3”, Non-toxic spirit filled glass tube Durable plastic Casing Vertical Glass Tube Refrigerator/Freezer Thermometer

DigitalsCordless Pipe Clamp

Features: Perfect tool to measure pipe surface temperatures and/or take measurements of liquids/solids quickly

and easily without a lot of equipment with the same instrument Patented Design, Can be used on pipes with diameters of 1/4" to 1-3/8" It features a cordless pipe clamp with a 2.5" retractable general purpose puncture probe It includes a Nylon belt pouch, Single handed use, Certifications: WEEE, Warranty: 1 Year Warranty


BatteryPart Number LCD Height Life Type Description4005I .875" x .25" 90 hours Button cell battery,

AG13 or LR44Cordless Pipe Clamp Instrument with Min, Max and Hold Featureand Retractable Puncture Probe, Includes Carrying Pouch




Tools and Test InstrumentsInstruments Cooper AtkinsDigitalsDigital Pocket Test with Temperature Alarm

Features: Checks the rinse temperature of your commercial dish washing machine Stores maximum temperature registered in rinse cycle IPX7 waterproof-rated, Anti-microbial additive LCD flashes when desired temperature is reached, Accurate for Life! Maximum and Minimum Temperature Memory, plus Hold Mode Low Battery Indicator, Lifetime warranty Certifications: NSF, CE, WEEE, RoHS


BatteryPart Number LCD Height Life Type DescriptionDFP450W-0-8 .25" 500 hours 1.5 V LR44 Waterproof Lollipop Style Thermometer with Temperature Alarm, with

Anti-Microbial Additive to Plastic, Reduced Tip w/>6 Sec Response Time

Digital Refrigerator / Freezer ThermometerFeatures: A a low temperature digital thermometer designed to hang or stand within the food zone inside cold

storage cabinets One of the most accurate refrigerator / freezer instruments with a specification of ±1ºF (±0.5ºC), and

is guaranteed accurate for life ºF / ºC selectable with a minimum and maximum temperature feature The unique ABS plastic frame design is removable for easy cleaning, Water-resistant Both the thermometer and the frame are water-resistant and incorporate an anti-microbial additive

that prevents the growth of bacteria Certifications: NSF, CE, RoHs, WEEE


BatteryPart Number LCD Height Life Type Description2560 1.875" x .750" 316 days CR 2032 (button)

includedDigital Refrigerator/Freezer Thermometer, NSF Approved, Hangs OrStands in Case, 1° Accuracy, Anti-Microbial Additive to Plastic

MAX Digital Pocket Test ThermometerFeatures: MAX Digital Pocket Test Thermometer has a Jumbo LCD, 12" reach with pocket sheath and can be

used to test dishwasher final rinse cycles. The DPP800W sensor is located at the end of the reduced tip, providing a quick response time of

less than 6 seconds. MAX has a large pocket clip with anti-microbial additive and is part of the Accurate for Life Time. HOLD, MIN / MAX, Low Battery Indicator, Warranty: Guaranteed Accurate for Life! Certifications: CE Certified, NSF Listed, WEEE Marked and RoHs Compliant


Part Number LCD Height Battery Type Housing Material DescriptionDPP800W 1.5” x 0.50” 1.5 V #LR44 Anti-microbial Protective

Sheath & Pocket Clip"MAX" Waterproof Thermometer with Anti-Microbial Additive toPlastic, Reduced Tip W/>6 Sec Response Time, 1° Accuracy




Tools and Test InstrumentsInstruments Cooper AtkinsDigitalsSwivel Head Digital Pocket Test Thermometer

Features: This Swivel Head design will stop at 30°, 45°, 60° or 90° increments, in both directions, allowing for

easier temperature readings at any angle It has a stainless steel stem with a Reduced Tip design A protective pocket sheath is included with anti-microbial additive DPS300-01 will re-start in the last °F or °C temperature mod last used Warranty: 1 Year, Certifications: CE, RoHS, WEEE


BatteryPart Number Life Type Display DescriptionDPS300-01-8 4300 hours

typical1 1.5 V LR44 1.0” wide x 0.5” high LCD with

black digits on silver background180 Degree Swivel Head Digital Pocket Test Thermometer

Waterproof Pen Style Pocket Test ThermometerFeatures: This waterproof digital thermometer is NSF certified and has automatic shut-off Designed with anti-microbial additive to avoid bacteria growth and reduced stainless steel tip for a

quick response time, Low Battery Indicator, Protective Sheath & Pocket Clip With Anti-microbial Additive, Warranty: Lifetime, Certifications: NSF, CE, RoHS, WEEE


BatteryPart Number LCD Height Life Type DescriptionDPP400W-0-8 .25" 500 hours 1.5 V #LR44 Waterproof Pen Style Thermometer with Anti-Microbial

Additive to Plastic, Reduced Tip w/>6 Sec Response Time

Infrared ThermometersInfrared Gun-Style 35:1 with Laser

Features: Gun-Style Infrared Thermometer with Dual Laser, LED Flashlight and Hi/Lo Alarm With carrying case Min / Max, Difference, Lock, Programmable Hi/Lo alarm Battery Life: 18hrs typ / 14hrs min continuous use with laser/backlight off - low battery indicator Enhanced optics allows to measure smaller objects further away Amber Back-Light LCD Display, LCD Displays Error Messages 1 Year Warranty, Certifications: CE, RoHs, WEEE


BatteryPart Number LCD Height Life Type Description424-0-8 Backlight 18hours typ /

14hours mincontinuous use

2 AAA, 1.5VAlkaline

Infrared Gun-Style Thermometer, 35:1 D:S, Dual Laser Pointer,Built-In LED Flashlight, Magnetic Mount, Adjustable EmmisivityButton & Carrying Case




Tools and Test InstrumentsInstruments Cooper AtkinsInfrared ThermometersInfrared with Laser & Thermocouple Jack

Features: The 412’s innovative design incorporates a Non-contact Infrared Thermometer to measure surface

temperature with a Thermocouple Jack to measure internal temperature Features a Distance to Spot Ratio of 11 to 1 It is loaded with features including single-dot laser sighting, high and low alarms, back-lit LCD for

easy viewing, automatic data hold and AVG, MAX, MIN, DIF and Locks Modes Comes with a soft carrying pouch for storage, Fahrenheit / Celsius selectable Single point laser sighting, Soft carrying case (included) CE certified, WEEE marked, RoHS compliant Accepts any Type K thermocouple probe One year warranty Specifications:

Temperature range Infrared: -76° to 932°F / -60° to 500°C Thermocouple jack: -83° to 1999°F / -64° to 1400°C

Accuracy Infrared: ±4F° / ±2C° or 2% of reading whichever is greater Thermocouple jack: ±2F° / ±1C° or ±1% of reading whichever is greater Emissivity: default 0.95 (adjustable from 0.10 to 1.00)

Auto shut-off Infrared: after 60 seconds of non-use Thermocouple jack: after 12 minutes of non-use


Battery Part Number LCD Height Life Type Description412-0-8 LCD with backlight 180 hours

typicalTwo AAA 1.5V

AlkalineInfrared Thermometer with Laser Sighting and Thermocouple Jack,12:1 D:S, Single Laser Pointer, Type-K Thermocouple Check,Adjustable Emmisivity Button, Hi/Low Level Alarms And Pouch




Tools and Test InstrumentsInstruments Cooper AtkinsMFMMulti-function Instrument Delux Kit 4

Features: Hard Carrying Case, Model 5029 Humidity Probe Model 4011 Surface Probe with 8" Velcro Strap Model 5200 1000 PSI Pressure Probe, Model 1075 Puncture Probe Model 5400 Vane CFM Thermo-Anemometer, Hard Carrying Case Strap Model MFM300 Multifunction Expandable Instrument Maximizes the capabilities of MFM300 Kits 1 through 3 MFM300 Kit4 - Deluxe Kit - Contains: Model 5250 500 PSI Pressure Probe Specifications:

Resolution

Temperature: 0.1° Relative Humidity: 1% Pressure: 1 psi (1 kPa) Airflow: 1fpm ( 0.001m/s )

Sensor Type

Temperature Relative Humidity Pressure (refrigerant gas) Airflow

LCD Height Character Height: 0.15 inch ( 3.8mm ) 8 lines w/ 20 characters per line ( up to 160 characters )

Housing Material Case: High-impact plastic Protective Boot: SBS


Part Number Battery Life DescriptionMFM300-KIT 4 100 hours

MinimumMulti-function Instrument Delux Kit 4, Measure & Calculate 3 Zones of Temp, Dry Bulb AndWet Bulb Calculations, Pressure, Airflow, Built-In P/T & Psych Charts & 15 PreprogramedRefrigerants

Model Shaft Length Shaft Diameter Cable Length 1075 probe 4 inch 0.140 inch 6 ft. Coil cord 5029 probe 5 inch 0.25 inch 6 ft. 4011 probe N/A N/A 12 ft. 5400 probe N/A N/A 6 ft. 5200 probe N/A N/A 6 ft. 5250 probe N/A N/A 6 ft.

Panel Meters2" Back Flange Back Connect Panel Thermometer

Features: Recalibratable, Dual Scale Dial, Nickel/Tin plated bulb and capillary, Stainless steel case The back flange has 3.160" diameter bolt circle and projects 1.2" from panel Polycarbonate lens/bezel, Bright Buffed Flange, 1 Year warranty, Certification: NSF


Part Number Connection DialDiameter

Description

6812-01-3 Back 2" 2" Back Flange Back Connect Panel Thermometer, OEM ReplacementThermometer Used in Commercial Refrigerators/Freezers




Tools and Test InstrumentsInstruments Cooper AtkinsPanel Meters2" Front Flange Back Connect Panel Thermometer - Model 6142-20

Features: The 6142-20 features a front flange, back connect, flush mount It features three (3) .156" diameter mounting holes equally spaced on 2.625" diameter bolt circle NSF certified Warranty: 1 Year


Part Number Connection Dial Description6142-20-3 Back Dual Scale Dial 2" Front Flange Back Connect Panel Thermometer, OEM Replacement

Thermometer Used in Commercial Refrigerators/Freezers

2" Front Flange Back Connect Panel Thermometer - Model DM120Features: The DM120 Digital Remote Panel thermometer features a front flange surface mount The removable lens makes battery replacement easy Certifications: CE, NSF, Rohs, WEEE Warranty: 1 Year


Part Number DescriptionDM120-0-3 2" Front Flange Back Connect Panel Thermometer, OEM Replacement Thermometer Used in

Commercial Refrigerators/Freezers

2.5" Front Flange Back Connect Panel ThermometerFeatures: It has three (3) .156" d iameter mounting holes equally spaced on 2.625" diameter bolt circle. Recalibratable Dual Scale Dial Nickel/Tin plated bulb and capillary Stainless steel case Polycarbonate lens/bezel Bright Buffed Flange 1 Year warranty Certification: NSF .


Part Number Connection Dial Diameter Description7112-01-3 Back 2.5" 2.5" Front Flange Back Connect Panel Thermometer, OEM Replacement

Thermometer Used in Commercial Refrigerators/Freezers




Tools and Test InstrumentsInstruments Cooper AtkinsPanel MetersDual-Cool Panel Thermometer

Features: Dual temperature panel thermometer with interchangeable probes, Min/Max alarm settings and Hi/Lo

temperature recall. Equipped with user adjustable settings, it can simultaneously measure temperatures within two

separate storage environments or two locations inside of the same reach-in, walk-in or hot-holding cabinet.

Available in three different kits including either two air probes, two solid simulator probes or one of each, allowing both the ambient air and product temperature to be monitored with a single unit.

A high volume audible alarm and jumbo LCD makes temperature monitoring easier than ever. 2013 Air Probe 2113 Solid Simulator Probe Certifications: CE, WEEE, RoHS One year warranty Specifications: 70 decibel alarm (can be disabled) Mounting bracket (includes screws & adhesive tape) Probe Specifications:

2013 Air Probe: 2113 Solid Simulator Probe: Temperature Range: -25° to 180°F Accuracy: ±0.4°F 32° to 158°F Response Time: 40 sec in 5 m / sec air stream Cord Length: 10’ One year warranty

Temperature Range: -25° to 180°F Accuracy: ±0.4°F 32° to 158°F Response Time: 40 sec in 5 m / sec air stream Cord Length: 10’ Patent pending One year warranty


BatteryPart Number Accuracy Life Type Display DescriptionPM180-01 ±2°F 200 days (1) AAA (included) 2.125” x 2.875” Dual-Cool Panel Thermometer

Rectangular Black Solar Panel ThermometerFeatures: When temperature monitoring is essential and space is limited the SP160 is the ultimate panel

thermometer. Not only does the compact size allow the SP160 to fit in most places that other panel

thermometers cannot,it does not require any external power sources. Solar power with 1.5v battery (1) AAA back-up Certifications: RoHS, CE, WEEE Warranty: 1 Year


Part Number LCD Response Time DescriptionSP160-0-8 1.4 x 0.5" 30 Second Rectangular Black Solar Panel Thermometer




Tools and Test InstrumentsInstruments Cooper AtkinsThermistor ProbesAir Probe

Temperature RangePart Number Cable Length Max Cable / Cord Max Tip Description2010 12’ Straight Cord 200°F 200°F Thermistor Air Probe with Extra-Long Cord Length, Air/Surface Probe

(Accessory/Replacement) for All Cooper-Atkins Thermistor Instruments

General Purpose Puncture Probe

Temperature RangePart Number Cable Length Housing Material Max Cable / Cord Max Tip Description1075 6’ uncoiled ABS 200°F 300°F General Purpose Puncture Probe Used to Measure

Temperatures by Insertion or Immersion

Pipe Strap ProbeFeatures: Perfect tool to measure pipe surface temperatures Quick and easy Installation Patented Design 1 Year Probe Warranty


Temperature RangePart Number Cable Length Max Cable / Cord Max Tip Description4011 12’ Straight Cord 200°F 212°F Pipe Strap Probe, (Accessory/Replacement) for All

Cooper-Atkins Thermistor Instruments

Thermistor Pipe Clamp Probe

Part Number Description4005 Thermistor Pipe Clamp Probe (Accessory Probe) for All Cooper-Atkins Thermistor Instruments




Tools and Test InstrumentsInstruments Cooper AtkinsThermistorsTemperature / Humidity Thermistor Instrument

Features: The SRH77A features include a backlight display for dark environments, sealed keypadwhich

protects the instrument from spills and dust, and a battery eliminator jack 3-Zone, Min/Max memory, Keypad: Sealed Keypad which protects instrument from spills & dust The auto shut-off begins after 15 minutes of non-use or continuous ON mode Features temperature differential between zones 1 and 2, %RH and wet bulb The Constant Scan feature records the min/max temperature from three probes allowing the

technician to monitor critical temperatures remotely while completing other tasks Warranty: 5 Year,Certifications: CE, RoHS, NIST, WEEE Includes: Model 1075 General Purpose Puncture Probe, Model 4011 Pipe Strap Probe, Model 5028 Humidity Probe


Battery Part Number Life Type Dimensions DescriptionSRH77A-E 90 hours (1) 9V Alkaline 9.5" x 6.5" x 3.5" Temperature / Humidity Thermistor Instrument

Temperature Thermistor InstrumentFeatures: Measure suction and liquid line temperatures simultaneously, temperatures across condensing coils,

as well as the ambient temperature, all at the same time The Constant Scan feature records the min/max temperature from three probes allowing the

technician to monitor critical temperatures remotely while completing other tasks 3-Zone, Certifications: WEEE, CE, NIST, RoHS, Warranty: 5 Year Instrument, 1 Year Probe Includes: Probe: Model 2010 Air Probe, Probe2: Model 4011 Surface Probe Probe3: Model 1075 General Purpose Puncture Probe


BatteryPart Number Life Type DescriptionSH66A-E 90 hours 9V Temperature Thermistor Instrument, Measure & Calculate 3 Zones Of Temp W/Min, Max,

Ave And Delta-T Calculations, Includes, 1075, 4011 & 2010 Probes with Built-In Case

Thermistor Temperature InstrumentFeatures: For those applications where only one temperature is read at a time, the TM99A is an industry

standard, Min/Max memory, hold, auto shut-off. LCD backlight for dark environments The TM99A includes a pouch and 1075 general purpose probe Certifications: CE, RoHS, NIST, WEEE,Warranty: 5 year instrument warranty, 1 year probe


BatteryPart Number Life Type DescriptionTM99A-E 1800 hours. (2) AAA Thermistor Temperature Instrument, Single Zone Instrument Measures

Temperature, Comes with Pouch & 1075 Probe




Tools and Test InstrumentsInstruments Cooper AtkinsThermocouple ProbesPipe Clamp Probe

Features: Used for measuring pipe surface temperatures Can be used on pipes with diameters of .25" to 1.375" Warranty: 1 Year Probe Warranty


Temperature RangePart Number Cable Length Max Cable / Cord Max Tip Description4005MK 10’ 200°F 300°F Thermocouple Pipe Clamp Probe, Can Be Used with Any Type-K

Thermocouple Instrument

Thermcouple Pipe Strap ProbeFeatures: Designed to measure large diameter pipe surface temperatures that standard pipe clamp probes

may not fit around, it’s perfect for tight spaces The temperature of a pipe can be read immediately when the probe is plugged into any Type K

Thermocouple Instrument Easy to install, fits pipes up to 3.3” in diameter Special strap-hook design allows to quickly secure the probe to the pipe Patented Design #6834993 Mounting: Strap-hook for mounting, 11” strap length Certifications: RoHS Warranty: 1 year warranty


Part Number Cable Length Accuracy Description54011-K 10’ straight cord length ±2.5 F° Thermcouple Pipe Strap Probe, Can Be Used with Any Type-K

Thermocouple Instrument




Tools and Test InstrumentsInstruments Cooper AtkinsThermocouplesDual Input - 2 Zone Thermocouple Needle Probe Kit

Features: Meets the need for industrial environments with a temperature range of up to 2000°F Includes a rubber boot that wraps around the unit for protection Dual input jacks allow the operator to monitor two locations at once After temperatures have stabilized, select the temperature Delta between the two probes Ideal for monitoring in and out flow lines of cooling and heating units Uses Type K probes with standard mini-connector Functions: Max Function stores maximum reading while active, Hold button freezes current reading Certifications: CE Warranty: 1 Year Instrument & Probe Warranty Kit Includes: TD2000 Thermocouple Instrument (2) 6030MK Bead Tip Probes 31901-K Needle Probe Velcro Wrist Strap


Battery Part Number LCD Height Life Type DescriptionTD2000-01 0.5" 200 hours (1) 9V Dual Input - 2 Zone Thermocouple Needle Probe Kit, Ideal for Monitoring

In/Out Flow Lines of Heating/Cooling Units Min/Max & Delta-T Calculations

Dual Input - 2 Zone Thermocouple Pipe Strap KitFeatures: It’s a dual-input, Type K thermocouple instrument designed to monitor two zones simultaneously It’s ideal for monitoring in/out flow lines of cooling and heating units and displays Max temperature and

Delta-T calculations It includes a protective rubber boot and has a temperature range up to 2000°F Warranty: Five year instrument warranty, One year warranty Kit Includes: TD2000 Thermocouple Instrument (2) 54011-K Pipe Strap Surface Probes Velcro Wrist Strap 14057 Soft Pouch


BatteryPart Number LCD Height Life Type DescriptionTD2000-02 2.125” x 1” 200 hours (1) 9V Dual Input - 2 Zone Thermocouple Pipe Strap Kit, Ideal for Monitoring In/Out

Flow Lines of Heating/Cooling Units Min/Max & Delta-T Calculations




Tools and Test InstrumentsInstruments FieldpieceAccessory HeadsCarbon Monoxide Detector Accessory - ACM3

Features: Works with any Fieldpiece expandable instrument or handle or any DMM with mVDC ranges and our

detachable leads. Fast electrochemical sensor helps you find CO sources like cracked heat exchangers or breached

flue stacks. Calibrate to ambient quickly with ZERO calibration pot. Auto Power Off (APO) to save battery life (easy to disable). Battery check with % of battery life left displayed. Use with optional AOXP2 pump for flue gas testing. Kit Includes: ACM3 Carbon Monoxide Detector Calibration screwdriver 9V battery (installed) Operator’s manual Specifications:

http://www.fieldpiece.com/Remember+my+selection=remember&United+States+-+English=United+States+-+English

Initial accuracy at 73ºF±9ºF, <75%RH 0-15ppm ±5% reading ±1 ppm after zeroing

16-35ppm ±5% reading ±2 ppm after zeroing 36-1000ppm ±5% reading ±5ppm after zeroing

CO air sample temperature range 32 to 105°F Operating relative humidity 15 to 90%RH, non-condensing

Sensor calibration Factory calibrated on 205ppm

Long term drift <5% / year (depending on use)

BatteryPart Number Life Type Display DescriptionACM3 Approx.150 hours typical (Alkaline) 9V Updates real-time Carbon Monoxide Detector Accessory




Tools and Test InstrumentsInstruments FieldpieceAccessory HeadsDual-Temperature Accessory - ATH4

Features: Field calibration for ±1ºF accuracy. Displays ºF directly at 0.1ºF resolution on DMM with 0.1mVDC resolution. Select ºF or ºC. Converts from -50ºF to 1800ºF (optional thermocouple required for 1800ºF) Includes two “wrap tab” thermocouples plus velcro straps. Thermocouples insulated to 400ºF. Auto-off can be disabled for data logging. Kit Includes: Dual-Temperature Accessory - ATH4 (2) K-type wrap tab bead thermocouples - ATB1 (2) Velcro Tie- wraps (not pictured) Mini-calibration screwdriver 9V battery (installed) Operator’s manual Specifications:

System accuracy

at 75ºF ± 5ºF ambient, after ice bucket calibration ±1ºF, -50 to 165ºF ±2ºF, 165 to 350ºF ±3ºF, 350 to 1700ºF

Outputs Switchable T1, T2, T1-T2, standard male banana plugs Calibration Two externally adjustable pots Conversion rate 1mVDC per 1º Range -50 to 1800ºF LED indication green for "On", red for low battery Max input voltage 60 VDC, 24 VAC Converter accuracy ±0.5%+3.6ºF, -50 to 1800ºF Probe insulation Teflon, to 500ºF Thermocouple accuracy ±4ºF or ±0.75%, whichever is greater, -30 to 1500ºF

Strong RF fields can adversely affect the converter performance.


BatteryPart Number Life Type DescriptionATh4 200 hours continuous Standard 9V Dual-Temperature Accessory




Tools and Test InstrumentsInstruments FieldpieceAccessory HeadsIn Duct Hot-wire Anemometer & Psychrometer - AAT3

Features: Measures temperature and %RH Calculates wet bulb and dew point Slim 38" telescoping probe Fast response time Depth and direction indicators Hands-free testing with stabilizing cone and magnetic hanger Can send wireless measurements from up to 100' away Kit Includes: In Duct Hot-wire Anemometer/Psychrometer Accessory Head - AAT3 Telescoping Precision Thermistor & Hot-Wire Probe Stabilizing Cone – RCONE Specifications:

Air Velocity -4°F to 140°F Relative humidity 32°F to 131°F Output impedance approx. 1KΩ

Relative Humidity

Range: 0% to 100% RH Accuracy: ±2.5% @ 73.4°F (23°C), 10% to 90% RH, ±5% @ 73.4°F (23°C), 90% RH Sensor Response Time: 60 seconds typical for 90% of total range. Sensor Hysteresis: ±1%RH typical

Temperature Range: -4°F to 140°F Accuracy: ±1°F 32°F to 113°F, ±2°F -4°F to 32°F, 113°F to 140°F

Sensor type Air velocity: Tiny glass bead thermistor. Relative Humidity: Capacitance polymer film. Temperature: Precision thermistor.

Maintenance Clean the exterior with a dry cloth. Do not use liquid. Battery Replacement When Lo Batt LED lights up replace old battery with new 9V battery Range: 40-3940 ft/min (Note: to use full range AAT3 must be connected to a DMM with a 4000 mVDC range or greater.) Air Velocity Accuracy: ± (5%+1 dgt) reading or ± (1%+1dgt)full scale.


BatteryPart Number Life Type Indicators DescriptionAAT3 20 -35 hours typical 9V Red Lo Batt LED In Duct Hot-wire Anemometer & Psychrometer




Tools and Test InstrumentsInstruments FieldpieceAccessory HeadsSuperheat and Subcooling Accessory for Air Conditioning - ASX14

Features: Display pressure in PSI or kPa Display temperature in ºF or ºC Display superheat in ºF or ºC Select R22 or R410A Auto-off can be disabled for data logging Includes "T" Accepts K-type thermocouples ATC1 pipe clamp T/C included LED indicates when readings are stable Thermocouple calibration pot Push-button atmosphere pressure calibration Kit Includes: Superheat and Subcooling Accessory for Air Conditioning - ASX14 Pipe-Clamp Thermocouple 3/8” to 1 3/8” for Air Conditioning - ATC1 Mini-calibration screwdriver 9V battery (installed) Operator’s manual Specifications:

Overloads The ASX14 outputs 3.4V when temperature or pressure is outside of their working range (overloaded). For ranges below 3400mVDC, the normal overload symbol wi ll be displayed on the meter (“OL”). For ranges above 3400mVDC, reading displayed will be approximately 3.4VDC.

Stated Accuracy at 73°F ± 9°F <90% R.H. Compatible Refrigerants

Built-in Pressure/Temperature Charts: R22, R410A. PT charts for 12 refrigerants when used with HVAC Guide System Analyzer

Temperature

Range (temperature): -40ºF to 400ºF Resolutions: 0.1º Sensor type: k-type thermocouple Pipe clamp thermocouple accuracy: ±4ºF or ±0.75%, whichever is greater, -30ºF to 200ºF System accuracy: ±1ºF;±0.06ºC @ 73ºF ± 5ºF after ice water calibration

Pressure and vacuum

Working range (pressure): 0 to 500 psi Max displayed pressure: 800psi Working range (vacuum): 29”Hg vac. to 0 Resolutions: 0.1psi or kPa, 0.1”Hg or cm Hg vac. Accuracy: 0 to 200 psig, ±1 psi; 200 to 500 psig, 0.3% ±1 psi Sensor breakdown pressure: 800psi

Superheat Range (temperature): 0ºF to 80ºF Resolutions: 0.1º System Accuracy: ±1ºF @ 73ºF ± 5ºF after calibration

Subcooling Range (temperature): 0ºF to 80ºF Resolutions: 0.1º System Accuracy: ±1ºF @ 73ºF ± 5ºF after calibration


Part Number DescriptionASX14 Superheat and Subcooling Accessory for Air Conditioning




Tools and Test InstrumentsInstruments FieldpieceAdapters & HandlesElectronic Handle - EHDL1

Features: MAX/MIN button to record the highest and lowest reading, Hold button to hold the reading EHDL1 has a 200 and 2000 mVAC for use with Amp Clamp


Part Number Overload Protection DescriptionEHDL1 30VDC or 24VAC Electronic Handle

CasesDeluxe Meter Case – ANC1

Features: Easily holds 1 meter and 2 accessory head instruments Rugged nylon construction, padding, durable pockets inside and out, a rugged double zipper and a

shoulder strap


Part Number Dimensions Material DescriptionANC1 10”H x 6.5”W x 1.5”D Padded Nylon Deluxe Meter Case

Clamp MetersDual-Display Mini Clamp Meter - SC53

Features: Dual-Display: The SC53 display allows to read amperage while testing any other function on the dial. Non-contact Voltage: With the NCV tab on the tip of the clamp close to an AC voltage, press and hold the

NCV button. The NCV LED will light with an analog feel and the beeper will beep.Closer to AC voltage, louder the beep. The NCV function is sensitive enough to detect 24VAC on thermostats

400AAC: Using the built-in amp clamp, read 0-400 amps directly on meter with 0.1 resolution Capacitance (MFD): Measure microfarads on motor-run and motor-start capacitors using this range Temperature: Take ambient air or refrigeration line temperatures and more with the built-in K-type port

and the included ATB1 wrap tab thermocouple Wire Grabbing Jaw: The amp clamp is shaped like a jaw to make grabbing a single wire easy using only

one hand., Hold: The HOLD button is easily pressed with thumb while holding the mini clamp meter naturally in hand, Volts AC, Volts DC, Resistance (Ohms), Continuity, Rugged ABS case

Ergonomic shape fits naturally in your hand, Auto power-off (APO) to conserve battery life Compact - under 8” tall Kit Includes: Dual-Display Mini Clamp Meter with Temperature - SC53 Vinyl Test Leads,Mini Clamp-On Meter Case - ANC4 Three (3) 3V lithium-ion CR2032 batteries (installed),Operator’s manual


Part Number Altitude Auto-Off Operating Environment Overrange DescriptionSC53 6561.7 feet 10 minutes 32 to 122°F, at <70% R.H. (OL) or (-OL) is displayed Dual-Display Mini Clamp Meter




Tools and Test InstrumentsInstruments FieldpieceClamp MetersDual-Display Mini Clamp Meter - SC53

Specifications: DC Volts:

AC Volts (50Hz - 500Hz): Ranges Resolution Accuracy Input impedence

4V, 40V, 400V, 600V 1mV ±(1.2% rdg + 5 dgts), ±(1.5% rdg + 5 dgts) on 600V range

4V: 10MΩ 40V~600V: 9.1MΩ

Minimum test time for stable reading: 2 seconds Resistance: Ranges Resolution Accuracy Open circuit volts

400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ 0.1Ω

±(1.0% rdg + 4 dgts) on 400Ω to 400kΩ ranges ±(1.5% rdg + 4 dgts) on 4MΩ range ±(3.0% rdg + 5 dgts) on 40MΩ range

-0.45VDC typical, ( 1.2VDC on 400Ω range)

Minimum test time for stable reading: 2 seconds AC Current (50Hz - 60Hz): Ranges Resolution Accuracy 40A, 400A 0.01A ±(2.0% rdg + 6 dgts)

Capacitance: Ranges Resolution Accuracy Minimum input range 4μF, 40μF, 400μF, 4mF 4.000mF = 4000μF

1.0nF ±(3% rdg + 10 dgts) on 4μF ±(3% rdg + 5 dgts) on 40μF to 400μF ±(5% rdg + 20 dgts) on 4mF (4000μF)

>100nF

Safety: “dsc” symbol on LCD indicates that the capacitor must be discharged before testing. Continuity: Ranges Resolution Audible indication Response time 400Ω 1Ω Less than 25Ω 500ms

Temperature: Ranges Resolution Accuracy Sensor type

-30 to 400°F 0.1°F

±1°F (32 to 120°F); ±0.5°C (0 to 49°C), ±1% + 1.5°F (-4 to 400°F); ±1% + 1°C (-20 to 204°C), ±2% + 4°F (-30 to -4°F); ±2% + 2°C (-34 to -20°C).

K-type thermocouple

Overload Protection: o VAC/DC: 600VDC or AC RMS,AAC: 400 AAC o Resistance 500VDC or AC RMS, Continuity 500VDC or AC RMS o Capacitance 500VDC or AC RMS, Temperature 60VDC or 30VAC RMS

Display: 3-1/4 digit liquid crystal display (LCD) with a maximum reading of 3999. Accuracy: Specifications good in ambient conditions of 74°F ±8°F (23°C ±4°C), <75% relative humidity. Jaw opening capability: 30mm (diameter) conductor Battery life: 100 hours typical for lithium-ion on AAC (top display), 75 hours typical for lithium-ion on dial functions

(bottom display) Accessories: One pair vinyl test leads, ATB1 k-type thermocouple, (3) 3V CR2032 batteries (installed), ANC4 carrying

case, and operating instructions Safety: IEC/EN 61010-1 (UL61010-1) CATIII 600V and IEC/EN 61010-2-032 (UL61010-2-032) CATIII 300V, class II and

pollution degree 2 indoor use comply with CE, C-tick certified

Ranges Resolution Accuracy Input impedence

4V, 40V, 400V, 600V 1mV ±(0.5% rdg + 2 dgts) 4V: 10MΩ 40V~600V: 9.1MΩ




Tools and Test InstrumentsInstruments FieldpieceClamp MetersSwivel Head Clamp Meter - SC54

Features: Fast Testing Expanded temperature tolerances -- allows for testing in refrigerators and on rooftops Bright backlight. Capacitance -- to test questionable motor start and run capacitors Swivel Head -- for a clear view at any angle Frequency (Hz) through the clamp -- no more unnecessarily breaking the circuit Modular Expandability True RMS Kit Includes: SC54 Clamp Meter,ATB1 Thermocouple ADLS2 Silicone Leads,ASA2 Gator Clip Leads ANC7 Padded Case Specifications: \

Measurement rate 2 times per second, nominal

Overload protection 600VDC or 600VAC rms unless otherwise stated in the individual test sections.

Low battery indication Battery icon will be empty (). "batt" displays along with a continuous beep when the battery voltage drops below the operating level. Meter shuts off in 5 seconds

Test leads Shall use UL listed test leads complied UL61010-031 rated CATIII 600V or above


Part Number Altitude Auto-Off Battery Life Overrange DescriptionSC54 6562 feet Approx. 30 minutes 100 hours typical alkaline (OL) or (-OL) is displayed Swivel Head Clamp Meter




Tools and Test InstrumentsInstruments FieldpieceClamp MetersTrue RMS Clamp Meter - SC77

Features: Works with Fieldpiece Accessory Heads:

There is a Fieldpiece accessory head available for just about any job. There are heads to measure temperature, superheat, subcooling, RH%, wet bulb, dew point, vacuum (microns of mercury), manometer (inches of water column), amps AC&DC, high voltage, CO, %CO2, air velocity, and many more

Non-contact Voltage: With the NCV tab on the tip of the clamp close to an AC voltage, press and hold the NCV button. The NCV LED will light with an analog feel and the beeper will beep. The closer you get to AC voltage, the louder the beep. The NCV function is sensitive enough to detect 24VAC on thermostats

High Voltage and Continuity Indicators: If you were doing lab testing, these features would probably drive you crazy. We’ve heard from more than one HVAC/R veteran that these features really remind you of what you’re doing and they’ve avoided potentially dangerous situations in the field. The Hi-V LED and beeper let you know when you’ve hooked up to a circuit over 30V. The continuity LED and beeper tells you if a circuit is open or closed

300AAC: Using the built-in amp clamp, read 0-300 amps directly on your meter with 0.1 resolution Capacitance (MFD):

Measure microfarads on motor-run and motor-start capacitors using this range. Disconnect the capacitor from power first. Short the terminals to discharge the capacitor. Disconnect any resistors that might be between the terminals of the capacitor and measure to check for degradation

Temperature: Take ambient air or refrigeration line temperatures and more with the built-in K-type port and the included ATB1 wrap tab thermocouple. Add a wet sock (saturated tissue or a shoelace to take wet bulb temperatures.The built-in temperature junction offers great temperature compensation for more accurate and faster measurements

Microamps DC - Flame Rectification Tests: The most common ‘no heat” call has to do with a malfunctioning flame sensing diode. Simply turn the meter to microamps DC, hook up, and see if the flame sensing rod is functioning properly

True RMS: Digital multimeters use two different types of AC sensing. The most common is average sensing, normalizedto a true RMS value of a sine wave. The other is true RMS sensing. The actual true RMS value is sensed for a wave form within the limits of the crest factor. Either sensing method will give the same results on a clean sine wave but they may differ on a non-sinusoidal waveform

Silicone Leads with Detachable Probe Tips: Because the wire insulation is silicone, the leads stay flexible in cold weather and will not melt if bumped by a soldering iron. When testing electrical circuits with two hands, there is a risk that a careless mistake may complete a circuit through your body and potentially cause death or injury. Use the probe clip on the amp clamp to connect and firmly hold the V lead in place, detach the COM probe tip, connect an alligator lead tip to COM and ground, and perform a one-hand test more easily than most meters on the market. Built-in lead storage makes it easy to keep everything together from job to job

Wire Grabbing Jaw: The fixed jaw is longer than the moveable jaw to make it easier to select just one wire from a bundle. With the jaws closed, separate one wire using the long fixed jaw. Slide it to the corner where the two jaws meet. Then open the jaws to let it in . Now you can select the wire without holding the jaws open

Bright Blue Backlight: Easily read the display in overcast conditions or in dimly lit areas

Hold: The HOLD button is easily pressed while holding the mini clamp meter naturally in your hand. It holdsany reading on your meter so you can concentrate on the test points and look at the LCD after you’ve disconnected. Volts AC, Volts DC,Resistance (Ohms),Diode Test, Rugged ABS case, Ergonomic shape fits naturally in your hand. Auto power-off (APO) to conserve battery life


Part Number Altitude Battery Life Display DescriptionSC77 6561.7 feet 100 hours carbon zinc, 200 hours

typical with alkalineLCD with a maximum

reading of 4000True RMS Clamp Meter




Tools and Test InstrumentsInstruments FieldpieceClamp MetersTrue RMS Clamp Meter - SC77

Specifications: DC Volts:

Ranges Resolution Accuracy Input impedence 400mV, 4000mV, 40V, 400V, 600V

0.1mV ±(0.5% rdg + 2 dgt) 3MΩ on V inputs, 10MΩ on mV input

Overload protection: 600VDC or AC rms Transient protection: 6kV for 10μ sec AC Volts (50Hz - 500Hz):

Ranges Resolution Accuracy Input impedence 4V, 40V, 400V, 600V 1mV ±(2.0% rdg + 8 dgts) 50 ~ 500Hz 3MΩ

Overload protection: 600V DC or AC rms Transient protection: 6kV for 10μ sec AC current(50Hz - 60Hz):

Ranges Resolution DC Accuracy 40A, 300A 0.01A ±(3.0% rdg + 10 dgts) 0 ~ 300A / 50 ~ 60Hz

Overload protection: 300AAC DC Current:

Ranges Resolution Accuracy Voltage burden 400μA 0.1μA ±(1.0% rdg + 2 dgt) 1V

Overload protection: 500V DC or AC rms Resistance:

Ranges Resolution Accuracy Open circuit volts

400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ 0.1Ω

±(1.2% rdg + 4 dgts) on 400Ω to 400kΩ ranges,±(1.5% rdg + 4 dgts) on 4MΩ range ±(3.0% rdg + 5 dgts) on 40MΩ range

-0.45VDC typical, (-1.2VDC on 400Ω range)

Overload protection: 500VDC or AC rms Continuity:

Ranges Resolution Audible indication Response time 400Ω 1Ω Less than 25Ω 500ms

Overload Protection: 500VDC or AC rms Green LED will be on continuously. Temperature:

Ranges Resolution Accuracy Sensor type

-30 to 1000°F 0.1°F

±1°F (32 to 120°F) ±1% + 1.5°F (-4 to 750°F) ±2% + 4°F (-30 to -4°F, 750 to1000°F) ±1°C (0 to 120°C), ±1% + 1°C (0 to 400°C) ±2% +3°C (-35 to 0°C, 400 to 600°C)

K-type thermocouple

Overload protection: 60 VDC or 30 VAC rms Capacitance:

Ranges Resolution Accuracy 4μF, 40μF, 400μF, 4mF,1mF = 1000μF 1nF ±(3% rdg + 10 dgts) on 4μF range,±(3% rdg + 5 dgts) on 40μF to 400μF

ranges ±(5% rdg + 20 dgts) on 4mF range

Input protection: 500VDC or AC rms Hi-V(voltage) warning: >30VAC/DC meter beeps, red LED blinks. Non-contact voltage: Senses voltage 24V to 600V AC (50Hz to 60Hz) beeper chirps and big bright red LED

comes on, works when meter dial is on any range Field Temp. calibration: For accuracies of ±1° calibrate the SC76 to a known temperature. A glass of stabilized ice

water is very close to 32°F (0°C) and is usually very convenient Safety: Designed to meet IEC/EN61010-1 and IEC/EN61010- 2-032, CATIII 600V, class II and pollution degree 2,

indoor use comply with CE. C-Tick,One pair test leads, one pair of small alligator clips, ktype thermocouple, 9V battery (installed).




Tools and Test InstrumentsInstruments FieldpieceClamp MetersTrue RMS Swivel Head Clamp Meter - SC56

Features: 180º Swivel Head Clamp to easily view your results at any angle Inrush Current to easily diagnose an impending motor failure Clamp Flashlight to illuminate wires in dark spaces Backlight Dual Display to display multiple information simultaneously -- even Celsius and Fahrenheit Rugged Construction to withstand harsh conditions Automatic Power Off (APO) to preserve your battery life when clamp isn't in us Non-Contact Voltage warning via audio and visual alarms Easy Field Calibration with convenient pot location to quickly calibrate K-type thermocouples True RMS to accurately measure non-sinusoidal wave forms Auto or Manual Ranging button to conveniently toggle between ranges Constant Battery Status so you don't run out of batteries in the middle of a job Kit Includes: SC56 - Swivel Head Clamp Meter ADLS2 - Deluxe Silicone Test Leads ASA2 - Alligator Clip Lead Extensions ATB1 - K-type Thermocouple ANC7 - Large Single Meter Case Velcro Strap Specifications:

Measurement rate 3.3 times per second, nominal Low Battery Indication Battery icon bl inks and “L.O.bt” is diplayed when battery voltage drops below

operating level Overload Protection 600VDC or 600VAC rms unless otherwise stated Power Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22


Part Number Auto-Off Battery Life Display Overrange DescriptionSC56 Approx. 30

minutes100 hours typical

alkaline5000 count dual displaywith backlight on SC56

(OL) or (-OL) is displayed True RMS Swivel Head Clamp Meter




Tools and Test InstrumentsInstruments FieldpieceClamp MetersWireless Swivel Head Clamp Meter - SC57

Features: Wireless Measurements for faster, more accurate readings 180º Swivel Head Clamp to easily view your results at any angle Clamp Flashlight to illuminate wires in dark spaces Bright Blue Backlight stays on for 3 minutes for easy readings Rugged Construction to withstand harsh conditions Automatic Power Off (APO) to preserve your battery life when clamp isn't in use Non-Contact Voltage warning via audio and visual alarms Easy Field Calibration with convenient pot location to quickly calibrate K-type thermocouples True RMS to accurately measure non-sinusoidal wave forms Auto Ranging for quick, accurate readings Constant Battery Status so you don't run out of batteries in the middle of a job Kit Includes: SC57 - Wireless Swivel Head Clamp Meter ET2W - Wireless Transmitter ADLS2 - Deluxe Silicone Test Leads ASA2 - Alligator Clip Lead Extensions ATB1 - K-type Thermocouple ANC7 - Large Single Meter Case Velcro Strap Specifications:

Measurement rate 2 times per second, nominal Overload protection 600VDC or 600VAC rms unless otherwise stated in the individual test sections Low battery indication

Battery icon will be empty (). "batt" displays along with a continuous beep when the battery voltage drops below the operating level. Meter shuts off in 5 seconds

Test leads Shall use UL listed test leads complied UL61010-031 rated CATIII 600V or above


Part Number Altitude Auto-Off Battery Life Display DescriptionSC57 6562 feet Approx. 30 minutes 100 hours typical alkaline 10000 count display with backlight Wireless Swivel Head Clamp Meter




Tools and Test InstrumentsInstruments FieldpieceClassic Style MetersClassic Style Digital Multimeter - LT17A

Features: Works with Fieldpiece Accessory Heads:

There is a Fieldpiece accessory head available for just about any job. There are heads to measure temperature, superheat, subcooling, RH%, wet bulb, dew point, vacuum (microns of mercury), manometer (inches of water column), amps AC&DC, high voltage, CO, %CO2, air velocity, and many more.

Continuity Indicator: If you were doing lab testing, these features would probably drive you crazy. We’ve heard from more than one HVAC/R veteran that these features really remind you of what you’re doing and they’ve avoided potentially dangerous situations in the field. The Hi-V LED and beeper let you know when you’ve hooked up to a circuit over 30V.The continuity LED and beeper tells you if a circuit is open or closed.

400AAC: Using the detachable test leads and the accessory head amp clamp, read 0-400 amps directly on your meter.

Capacitance (MFD): Measure microfarads on motor-run and motor-start capacitors using this range. Disconnect the capacitor from power first. Short the terminals to discharge the capacitor. Disconnect any resistors that might be between the terminals of the capacitor and measure to check for degradation.

Temperature: Take ambient air or refrigeration line temperatures and more with the built-in K-type port and the included ATB1 wrap tab thermocouple. Add a wet sock (saturated tissue or a shoelace to take wet bulb temperatures. The built-in temperature junction offers great temperature compensation for more accurate and faster measurements,

Microamps DC - Flame Rectification Tests: The most common ‘no heat” call has to do with a malfunctioning flame sensing diode. Simply turn the meter to microamps DC, hook up, and see if the flame sensing rod is functioning properly.

Frequency: Measure from 10Hz to 40kHz using this range with 1 Hz resolution.

Silicone Leads with Detachable Probe Tips: Because the wire insulation is silicone, the leads stay flexible in cold weather and will not melt if bumped by a soldering iron. When testing electrical circuits with two hands, there is a risk that a careless mistake may complete a circuit through your body and potentia lly cause death or injury. Use the either probe clip on rubber boot to connect and firmly hold the V lead in place, detach the COM probe tip, connect an alligator lead tip to COM and ground, and perform a one-hand test more easily than most meters on the market. Built-in lead storage makes it easy to keep everything together from job to job.

Tilt Stand and Magnetic Hanger: One thing we hear from technicians every day is how much they enjoy the magnetic hanger because it keeps the meter out of the way while testing. The LT17A includes the magnet and a tilt stand to give you a choice in the way you want to use it.Easily read the display in overcast conditions or in dimly lit areas. Record the minimum or maximum reading during a measurement. To exit the MIN/MAX function, hold the button for more than 2 seconds

Volts AC.Volts DC.Resistance (Ohms).Diode Test.Rugged ABS case with rubber boot.Even though it’s a classic meter it still fits naturally in your hand.Auto power-off (APO) to conserve battery life.


BatteryPart Number Life Type Indicators DescriptionLT17A 150 hours typical 9V NEDA 1604 type Continuity beeper (<100Ω). Low bat. Classic Style Digital Multimeter with Temperature




Tools and Test InstrumentsInstruments FieldpieceClassic Style MetersClassic Style Digital Multimeter - LT17A

Specification: Ranges Resolution Accuracy Input impedence

DC Voltage 200mV, 2000mV, 20V, 200V, 600V 0.1mV 0.5%±1 10MΩ

AC Voltage (50Hz-500Hz)

200mV, 2000mV, 20V, 200V, 600V 0.1mV 1.2%±4(200mV to 20V ranges),

2%±4(200V and 600V ranges) 10MΩ

Ranges Resolution Accuracy Voltage burden DC Current (through meter)

200μA, 20mA, 200mA 0.1μA 1.0%±1 800mV

AC Current (through meter)

200μA, 20mA, 200mA 0.1μA 1.5%±4 800mV

Frequency (Autoranging) Ranges Resolution Accuracy Sensitivity 10Hz to 40KHz 1Hz 1.0%±1 3.5V rms min

Resistance (ohms) Ranges Resolution Accuracy Open circuit voltage 200Ω, 2kΩ, 200kΩ, 20MΩ 0.1Ω 1.0%±4 (200Ω to 200kΩ ranges),

2.0%±4 (20MΩ range) 0.3VDC typical, (3.0VDC on 200Ω)

Diode Test Test current Accuracy Open circuit voltage 1.0mA approx. 1.5%±3 3.0VDC typical

Capacitance (MFD) Ranges Resolution Accuracy Test frequency Test voltage 200μF, 2kμF, 20kμF 0.1μF 4%±10 21Hz <3.0V

Temperature Ranges Resolution Accuracy Sensor type

-30 to 1400°F 0.1°F ±1°F; 32 to 120°F, ±1.0%+1.5°F; -4 to 750°F ±3.0%+4°F; -30 to -4°F and 750 to 1400°F

K-type thermocouple

Field Calibration (temp offset pot):

The LT17A can be easily calibrated on the job. Use a bucket of ice water to have a known 32°F temperature. With the thermocouple in the ice water, adjust the TEMP OFFSET pot on the face of the meter until it reads 32.0 (0.0).

Fuse Replacement: When only certain ranges quit working, check the fuse. Open the case and replace according to the Overload Protection values below. If that doesn’t work visit our Warranty Page.to check for other problems.

Overload Protection: o VAC/DC: (200mV range ) 600VAC/DC rms for 15 sec (>200mV range) 600VAC/DC rms o AAC/DC: 0.25A/500V fuse (6.3X32mm) o Capacitance: 0.25A/500V fuse (6.3X32mm) model RFM66 o Temperature: 30VAC/DC rms o Frequency: 500VAC/DC rms o Resistance: 500VAC/DC rms o Diode Test: 500VAC/DC rms o Continuity: 500VAC/DC rms




Tools and Test InstrumentsInstruments FieldpieceHVAC Guide System AnalyzerWireless HVAC Guide System Analyzer - HG3

Features: More Accurately Diagnose Systems with Real-Time Data 12 Wireless Parameters for Live Analysis Multi-parameter Data Logging Save Time by Eliminating Measurement Reconnections Monitor System While Making Adjustments Easy, One-time Set Up Minimize Call-back with Correct Diagnosis the 1st Time Includes: Wireless HVAC Guide - HG3 Wireless Handle - ET2W Dual Temp Accessory Head - ATH4 Dry Bulb Thermocouple - ATA1 Wet Bulb Thermocouple - ATWB1 CD to Download Software Computer Cable to Transfer Data Nylon Carrying Case - ANC8


Part Number Battery Type DC Accuracy DC Ranges DescriptionHG3 AA x 6 ±(0.5%rdg+2dgts) 500mVDC, 5VDC Wireless HVAC Guide System Analyzer




Tools and Test InstrumentsInstruments FieldpieceLeak & Gas DetectorsCombustion Check - SOX3

Features: Automatic Electric Pump with Pause -- Pump works automatically so there's no hand pumping, and

techs can pause the pump at any time to save battery life Field-replaceable Oxygen Sensor -- The SOX3 Oxygen Sensor indicators tells techs when a new sensor

is needed. With calibration data stored on the sensor, it can be swapped out in seconds, so there's never a need to send your instrument in for calibration.

Hands-free Testing -- The threaded R-cone holds the barrel firmly in the flue, and the strong magnet on the back of the SOX3 holds the instrument firmly to the side of the flue, while the internal electric pump does all the work. Techs simply view the results on the triple line display.

Combustion Efficiency -- Quickly calculated and displayed on the screen, the SOX3's combustion efficiency calculation is great measurement to help determine the health of a furnace.

Custom Fuels -- Not only does the SOX3 test Natural Gas, Oil #2, and Propane, but it can be quickly, and easily programmed to test any type of fuel. So non-conventional furnaces are just as easy to tune and

conventional furnaces. Kit Includes: Combustion Check - SOX3 Barrel and Thermocouple Handle - RSOX3 Threaded Barrel Lock - RCONE1 Filter accessory kit - RAOX9 Padded, Blow-molded Case Specifications: Temperature: Range -58°F to 1000°F Resolution 0.1° Accuracy ±[0.6%+3°F(1.7°C)]after field calibration. Sensor Type Rod K-type thermocouple. Range -50°F to 900°F (continuous operation range) up to 1000°F (single exposure use)Accuracy (±4°F) on -50°F to 545°F (±0.75%) on 545°F to 1000°F

Oxygen: Oxygen Range 0 to 25% Accuracy ±0.3%O2(Calibrated at 72°F, 20.9%O2) Max Overload 30% Oxygen Operational temp range -4°F to 122°F Response time Under 2 minutes.


BatteryPart Number Auto-Off Life Type DescriptionSOX3 after 15 minutes 28 hours typical alkaline 9V Combustion Check - Fast Easy Furnace Tuning




Tools and Test InstrumentsInstruments FieldpieceLeak & Gas DetectorsHeated Diode Refrigerant Leak Detector - SRL8

Features: State of the art heated diode sensor CFC, HFC, HCFC and blends Manual or automatic ZEROing Three sensitivity levels from 6.6oz/yr to <0.1oz/yr. Meets new SAE standards. Rugged / Ergonomic Features. Ruggedized boot fits in hand. Heated Diode Sensor lasts up to 5 years (depending on use and exposure). Audible/Visual Alarm. Turn the beep on or off. 15-hour Battery Charge. Work all day and all night on one charge. Battery life check. See how much charge is left by looking at the LED display. Non-conductive, Sturdy Probe. LED and Audio alerts. Find leaks in noisy environments. Mute: Turn off the sound. Magnetic Hanger. Kit Includes: Advanced Refrigerant Leak Detector - SRL8 (5) O-rings and 10 replacement filters - RFL2 9-inch Flex-Probe Extension - RFE2 Rigid Extension Probe - RRE2 Blow-Molded Case - ABMK3 Operator’s manual Specifications:

Gases measured CFC, HFC, HCFC& blends. Sensing element Heated Diode.

Sensitivity levels HIGH: better than 0.1 oz/yr. (per SAE standards) MEDIUM: 0.6 oz/year and higher. LOW: 6.6 oz/year and higher.

Calibration Automatic or manual zeroing. Warm-up time <30 seconds. Probe Length 15 inches. (Included extension probes measure 9 inches ea.)


BatteryPart Number Accuracy Life Type DescriptionSRL8 Meets current SAE standards Approximately 15 hours 3.7VDC(nominal)

rechargeable lithium ionHeated Diode Refrigerant Leak Detector




Tools and Test InstrumentsInstruments FieldpiecePocket ToolsDigital Psychrometer - PRH2

Features: For real-time, instant readings techs use everyday, this pocket digital psychrometer is a must have

for every HVACR professional Wet bulb, dry bulb, dew point, and %RH are shown on the backlight, dual display, and

measurements can be taken either in the duct, or while walking around PRH2 runs on a single AA-battery that lasts up to 100 hours The pen-like psychrometer features a slim, 2” long tip to take measurements easily inside ductwork


Part Number DescriptionPRH2(6) Pen-style Pocket Digital Psychrometer

Gun Style IR Thermometer - SIG1Features: The SIG1 Gun-Style Thermometer features a 10:1 field of view Shoot an indoor wall for indoor ambient temperature. Use for heating and A/C diagnosis when fast and quick measurements are desired. Check for bad connections by finding electrical hotspots. Protective PVC cover protects IR lens. Recessed display greatly reduces scratching. Point the SIG1 and pull the trigger to display the temperature on its backlit LCD. Narrow field of view for precise targeting., Auto-off to save battery life. Red laser pointer shows the center of the target sampling area. Accessories: Protective cover with strap, battery (installed), and operator’s manual


BatteryPart Number Accuracy Life Type DescriptionSIG1 ±2%rdg (213°F to 1022°F), ±4°F

(-22°F to 212°F)9 hours typical, laser

and backlight9V Gun Style IR Thermometer

Non-contact Voltage Detector - SNCV1Features: Senses 24VAC to 440VAC. LED & buzzer indicators with analog feel. Differentiates between hot and neutral. The closer the probe is to the voltage source, the louder and brighter the indicators become. Clips to shirt pocket. Safety: UL 1244, MAX 600VAC,CAT III, UL &cUL listed.


Part Number Battery Type Operating Environment DescriptionSNCV1(6) LR44 x 2 (included) 14 to 131°F Non-contact Voltage Detector




Tools and Test InstrumentsInstruments FieldpiecePocket ToolsPocketknife Style Thermometer - SPK1

Features: Features a sharp tip for punching through flex duct Hangs easily from a vent or thermostat 16 detent position grooves hold the rod at virtually at any angle The probe rod folds away simply with no cover sleeve to lose Convenient probe tip protection and storage. Easily fi ts in shirt pocket., MIN/MAX function., Hold function., ºC or ºF. Accuracy: ±3.6ºF (-58ºF to -4ºF), ±1.8ºF (-4ºF to 302ºF), ±5.4ºF (302ºF to 392ºF)


Part Number Battery Type Operating Environment DescriptionSPK1(6) A76 (included) 32°F to 122°F Pocketknife Style Thermometer

Standalone InstrumentsCarbon Monoxide Detector - SCM3

Features: Fast electrochemical sensor helps you find CO sources like Cracked heat exchangers or breached flue stacks Calibrate to ambient quickly with ZERO button Audio and visual alarms (with MUTE function) Alarm rate increases as carbon monoxide concentration increases MAX hold to help you zero in on the source Bright-blue backlit dual-display to test in dark crawl spaces Magnetic hanger for hands free testing Auto Power Off (APO) to save battery life (easy to disable) Battery check with % of battery life left displayed Use with optional AOXP2 pump for flue gas testing Kit Includes: Carbon Monoxide Detector - SCM3 9V battery Operator’s manual Specifications:

Range 0 to 1000PPM (2000PPM with 5 minute max exposure time) 36-1000ppm ±5% reading ±5ppm after zeroing

CO air sample temperature range 32 to 105°F Operating relative humidity 15 to 90%RH, non-condensing Sensor calibration Factory cal ibrated on 205ppm Long term drift <5% / year Initial accuracy at 73ºF±9ºF, <75%RH

0-15ppm ±5% reading ±1 ppm after zeroing 16-35ppm ±5% reading ±2 ppm after zeroing


BatteryPart Number Life Type Display DescriptionSCM3 Approx.150 hours 9V Updates real-time Carbon Monoxide Detector




Tools and Test InstrumentsInstruments FieldpieceStandalone InstrumentsCharging Jacket - S365

Features: Charge TXV systems from 37°F - 70°F outside Service maintenance contracts before and after the summer heat Easy to adjust to reach correct pressure differential Great way to increase business during the slow season Field tested for accuracy


Part Number DescriptionS365 Charging Jacket

Digital Vacuum Gauge - SVG2Features: Measures from 50 to 2000 microns Rugged rubber boot LED indicates stable pressure Fast response and high resolution Big display shows if the pressure is increasing, decreasing, or stable Inline "T" included Magnetic hanger Easy to clean Kit Includes: Digital Vacuum Gauge - SVG2 9V battery Operator’s manual Specifications:

Temperature coefficient

0.1 x (specified accuracy) per °C from 0°C to 18°C and 28°C to 50°C (32°F to 64°F and 82°F to 122°F)

Battery Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22. Battery life 6 hours continuity typical. Operating environment 32ºF (0°C) to 122ºF (50°C) at <75%RH Storage environment -4ºF (-20°C) to 140ºF (60°C) at <80%RH with battery removed from meter. Auto-off power 5 minutes only when reading is above 70,000 microns. Low battery symbol is displayed.

Vacuum pressure

Units of measure: microns (of mercury) Connector type: Standard 1/4” male flared fitting. “T” fitting included. Resolution: 1.0 micron (of mercury) Accuracy: ±10% or ±10 microns( 50 to 1000 microns) at 73°F ± 10°F, <90%RH Measurement range: 50 to 2000 microns (of mercury) Maximum overpressure: 500psi


Part Number Operating Environment Overrange Response Time DescriptionSVG2 32°F to 122°F at <75% R.H. (OL) or (-OL) is displayed 0.5 seconds Digital Vacuum Gauge




Tools and Test InstrumentsInstruments FieldpieceStandalone InstrumentsDraft Simulator - DDSM1

Features: Easily calibrate any adjustable pressure switch Always have the right pressure switch on the truck No need to carry a wide variety of pressure switches Mimics pressure produced by live draft inducers Replaces unreliable “Checking” procedures, Reduces call backs Kit Includes: Draft Simulator - DDSM1, One set of test leads Two hoses, Two hose adapters Operator’s manual


Part Number DescriptionDDSM1 Draft Simulator

Dual-Port Manometer - SDMN5Features: Measures gas pressure & static pressure Measures Differential Pressure P1-P2, Rugged rubber boot Min/Max and hold Auto off to conserve battery life Kit Includes: Dual-Port Manometer - SDMN5 2 - 3/16” tubes with brass fittings 2 - 3/16” to 5/16” tube adapters - RMA316 9V battery (installed), Operator’s manual Specifications: Pressure:

Pressure Ports tube connectors for 5mm (~3/16 inch) I.D. flexible tubing Units of Measure inWC, mmWC, mbar, PSI Resolution 0.01 inch WC (0.1mmWC, 0.01mBar) Accuracy ±1.5% FS

Measurement Range: In WC 0.00 to ±60.0 mm WC 0.0 to ± 1500 mBar 0.00 to ±150.0 PSI 0.000 to ±2.000


BatteryPart Number Accuracy Life Type DescriptionSDMN5 Stated accuracy at 0

to 50°C: ±1.5% FS200 hours with low battery

indicator on displaySingle standard 9-volt battery,

NEDA 1604, JIS 006P, IEC 6F22Dual-Port Manometer




Tools and Test InstrumentsInstruments FieldpieceStandalone InstrumentsIn-Duct Hot-wire Anemometer - STA2

Features: Measures air velocity and temperature Calculates CFM Slim 38" telescoping probe for in duct traversing Fast response time Dual display for combo of real-time CFM, air velocity, or temp Depth and direction indicators Minimizes turbulence effect with time/test point averages Hands-free testing with stabilizing cone and magnetic hanger Kit Includes: Hot-wire anemometer - STA2 Stabilizing cone Blow-molded case with padding Specification: Velocity:

Sensor type Micro-glass bead thermistor Resolution 1 fpm Range 40-3960 fpm Accuracy ± (5%+1 dgt) reading or ± (1%+1dgt) full scale Units fpm, m/s, km/hr, mph

Accuracy:

±1.0°F for 32°F to 113°F ±2.0°F for -4°F to 32°F, 113°F to 140°F ±0.5°C for 0°C to 45°C ±1.0°C for -20°C to 0°C, 45°C to 60°C

Temperature: Sensor type Precision Thermistor Range -4°F to 140°F Resolution 0.1°C, 0.1°F Battery indication is displayed when the battery voltage drops below the operating level


BatteryPart Number Accuracy Life Type DescriptionSTA2 Stated accuracy @ 73°F±9°F, <90%RH 20-35 hours approx. 9V In-Duct Hot-wire Anemometer




Tools and Test InstrumentsInstruments FieldpieceStandalone InstrumentsWireless Refrigerant Scale with Case - SRS2C

Features: Wireless communication between the platform and remote control The remote stores in the body of the platform for convenient carrying Solid aluminum platform with rubber corners means your scale is rugged enough for the field Diamond plated rubber pad keeps cylinders from sliding around the platform Easy synchronization between the platform and the remote Highly accurate weight sensor Magnetic hat on the remote allows for convenient display location and keeps your hands free Zero (tare) the scale from the remote Remote control remembers the last zero point, even after powering on and off Bright backlight allows you to read the remote display in any lighting Auto-power off conserves battery life Battery life for both the platform and remote control are visible at all times Wireless signal strength indicator The platform automatically goes into standby when the remote is turned off Long battery life Kit Includes: Wireless Refrigerant Scale - SRS2C Platform and remote Rugged nylon case with carrying strap Standard 9-volt battery (remote) installed 6 x AA batteries (platform) installed Operator’s manual Specifications: Accuracy:

±0.03%rdg + 0.25oz 0 to 66lbs ±0.05%rdg + 0.25oz 66 to 220lbs

Resolution: 0.25 oz or 10g Specifications good in ambient conditions of 73°F ±9°F, <75% relative humidity.

Temperature Coefficient: 0.1×(specified accuracy) per °F. Wireless Range: 33ft Maximum load: 220 lbs Power: Remote control: Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22.

Platform: 6 x AA batteries Battery life: Remote control: 80 hours (continuous use) with alkaline battery.

Platform: 100 hours (continuous use) with alkaline. Weight (platform + remote control): 7.1lbs


EnvironmentPart Number Operating Storage Overrange DescriptionSRS2C 32°F to 122°F at <75%

R.H.-4°F to 140°F, 0 to 80% R.H. with

battery removed"OL" mark indication Wireless Refrigerant Scale with Case




Tools and Test InstrumentsInstruments FieldpieceStick MetersExpandable True RMS Stick Multimeter with Backlight - HS36

Features: Non-contact Voltage:

With the red NCV tab on the tip of the meter close to an AC voltage, press and hold the NCV button. The NCV LED will light and the beeper will beep. The closer you get to AC voltage, the louder the beep. The NCV function is sensitive enough to detect 24VAC on thermostats.

High Voltage and Continuity Indicators In any VAC/VDC range, when you touch a vol tage greater than 30V, the beeper will beep and the red Hi-V LED will signal you. BE CAREFUL! The continuity beeper and green LED tell you if the circuit you’re testing is open or closed (using the switch position to the right of OFF).

Microamps: For measuring the flame diode current in a heater control.

Capacitance: For motor-start and motor-run capacitors. Disconnect the capacitor from power first. Short the terminals to discharge the capacitors. Disconnect any resistors that might be between the terminals of the capacitor.

MIN/MAX: Press MIN/MAX once to begin recording MIN and MAX. Press MIN/MAX to select current reading’s MIN or MAX. Hold down for 2 seconds to exit MIN/MAX function.

Temperature: Plug any K-type thermocouple directly into the meter to measure temperature. Temperature measurement will be accurate even in fast changing environments because of excellent temperature compensation. One thermocouple is included. No adapter is required.

Silicone Leads with Detachable Probe Tips: Because the wire insulation is silicone the leads will stay flexible in cold weather and will not melt if bumped by a soldering iron. When testing electrical circuits with two hands, there is a risk that a careless mistake may complete a circuit through your body and potentia lly cause death or injury. Detachable probes tips and the modular design of the HS36 allow you to plug V lead tip into the top of the meter, connect an alligator lead tip to COM and ground, and perform a one-hand test more easily than most any meter on the market.

Rugged ABS case with rubberized bumpers. Built-in magnetic hanger allows you to test with one hand or no-hands. Built-in lead storage. Ergonomic shape fits naturally in your hand. Auto power-off (APO) to conserve battery life Kit Includes: Expandable True RMS Stick Multimeter with Backlight - HS36,400A Amp Clamp Accessory - ACH4 Deluxe Silicone Test Leads - ADLS2,Short Alligator Lead Extensions - ASA2 Deluxe Meter Case - ANC1,9-Volt battery (installed) Operator’s manual Specifications:

Analog bar graph 41 segments with measurements 20 times per second Accessories One pair test leads, one pair alligator clips, k-type thermocouple, 9V battery

(installed), and operating instructions Safety UL,CE,Cat III600V,UL61010-1,IEC/EN61010-1


Part Number Accuracy Battery Life Auto-Off DescriptionHS36 Specifications good in ambient conditions of

73°F ±9°F, <75% relative humidity300 hours typical

with alkaline30 minutes Expandable True RMS Stick Multimeter with

Backlight




Tools and Test InstrumentsInstruments FieldpieceStick MetersExpandable True RMS Stick Multimeter with Backlight - HS36

Specifications: Temperature: Ranges Resolution Accuracy Sensor type

-30 to 1000°F 0.1°F ±1°F, 32 to 120°F, ±1% + 1.5°F, -4 to 750°F, ±2% + 4°F, -30 to -4°F, ±2% + 4°F, 750 to 1000°F

K-type thermocouple

Overload protection: 60 VDC or 30 VAC rms Continuity: Audible indication Response time Less than 40Ω 500ms Green LED will be on continuously

Overload protection: 500VDC or AC rms DC Volts: Ranges Resolution Accuracy Input impedence 400mV, 4000mV, 40V, 400V, 600V 0.1mV ±(0.5% rdg + 2 dgt) 3MΩ on V inputs, 10MΩ on mV input

Overload protection: 600VDC or AC rms Transient protection: 6kV for 10μ sec AC Volts (50Hz - 500Hz); Ranges Conversion Crest factor Resolution Accuracy Input impedance

400mV, 4V, 40V, 400V, 600V

True RMS Less than or equal to 3

0.1mV ±(1.2% rdg + 5 dgts) 50Hz ~ 60Hz on 400mV range ±(1.5% rdg + 5 dgts) ±(2% rdg + 5 dgts) on 600V range

3MΩ

Overload protection: 600V DC or AC rms Transient protection: 6kV for 10μ sec DC current: Ranges Resolution Accuracy Voltage burden 400μA, 4000μA 0.1μA ±(1.0% rdg + 2 dgt) 1V, (8V on 4000μA range)

Overload protection: 500V DC or AC rms Resistance: Ranges Resolution Accuracy Open circuit volts

400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40MΩ

0.1Ω ±(1.0% rdg + 4 dgts) on 400Ω to 400kΩ ranges ±(1.5% rdg + 4 dgts) on 4MΩ range ±(3.0% rdg + 5 dgts) on 40MΩ range

-0.45VDC typical, (-1.2VDC on 400Ω range)

Overload protection: 500VDC or AC rms Capacitance: Ranges Resolution Accuracy 400μF 0.1μF ±(3% rdg + 5 dgts)

Overload protection: 500V DC or AC rms Frequency: Ranges Resolution Accuracy Sensitivity Duty cycle limits

4k, 40k, 400k, 4M, 40MHz 1Hz ±(0.1% rdg + 3 dgts) 10Hz ~ 4MHz: > 1Vrms, 4MHz ~ 40MHz: > 2Vrms, Vrms

> 30% and < 70%

Overload protection: 500VDC or AC rms Minimum pulse width: > 25ns Field °F calibration:

For accuracies of ±1°F, calibrate to a known temperature. A glass of stabilized ice water is very close to 32°F (0°C) and is usually very convenient but any known temperature can be used




Tools and Test InstrumentsInstruments FieldpieceTest Leads and ProbesDeluxe Silicone Test Lead Kit - ADK7

Features: The ADK7 deluxe silicone lead is the optimal way to test most electrical parameters that run into

during, field service, The kit includes the ADLS2 silicone leads and ASA2 alligator leads plus RCT2 probe tips

HVAC techs often remove the black probe tip (common) and insert the black alligator lead for an extended reach from ground

When used with our stick meters, the Volts (red) probe tip is inserted into the top of the meter for easy one-handed testing

Use both alligator extension to perform “no-hands” tests Silicone test leads deliver better performance in temperature extremes than test leads insulated, with

vinyl


Part Number DescriptionADK7 Deluxe Silicone Test Lead Kit

Static Pressure Probes - ASP2Features: Makes taking static pressure measurements in duct work easier, faster and more accurate than using

manometer tubes alone, A magnetic flange and directional arrow for hands free use and to ensure proper positioning and optimal performance, Works with all Fieldpiece manometers


Part Number DescriptionASP2 Static Pressure Probes

ThermocouplesK-Type Thermocouple – ATB1

Features: The ATB1, K-type bead thermocouple is used to take temperatures of air, surfaces, or liquids up to 400°F Using the included Velcro strap allows for easy pipe temperature measurements Use the ATB1 for outdoor dry bulb temperatures when finding target superheat The ATB1 can be used with any of our meters that measure temperature and any thermometer accepting

a K-type thermocouple, The wrap-tab allows the thermocouple wire to conveniently store on the plug Just wrap the excess wire around the wrap-tab and feed it through one of the eyes Specifications:

Thermocouple conductors K-type nickel chromium/nickel aluminum.

Probe insulation Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation is designed to withstand a maximum continuous use at 400°F

Plug K-type thermocouple male mini plug.


Part Number Accuracy Temperature Range DescriptionATB1 +/- 4°F; ±1°F after field calibration, 32 to 176°F -50 to 400°F K-Type Thermocouple




Tools and Test InstrumentsInstruments FieldpieceThermocouplesPipe-Clamp Thermocouple 3/8” to 1 3/8” for Air Conditioning – ATC1

Features: The ATC1, K-type, pipe clamp thermocouple is used to take temperatures of pipes or any other

cylindrical surface within its 3/8” to 1 3/8” jaw range Using a pipe clamp thermocouple greatly facilitates taking superheat or subcooling measurements Use the ATC1 for most A/C units. The ATC1 can be used with any of our meters that measure

temperature and any thermometer accepting a K-type thermocouple The sensor is virtually isolated from ambient conditions, allowing the thermocouple to read the true pipe

temperature for as long as it is attached The sensor’s large surface area and increased clamping force help the sensor reach the correct

temperature within 30 seconds The jaw is designed for HVAC/R, its clamping abi lity lets you measure temperatures of pipes that are

fixed, at any angle, to walls or other surfaces Specifications:

ATC1 jaw range 3/8” to 1 3/8” pipe diameter Thermocouple conductors K-type nickel chromium/nickel aluminum Plug K-type thermocouple male mini plug

Probe insulation and clamp material

Calibration and atmosphere will affect maximum useful temperature in applications. The wire insulation and clamp material are designed to withstand a maximum continuous use at 257°F

Typical stabilization time less than 30 seconds


Part Number Accuracy Temperature Range DescriptionATC1 +/- 4°F; ±1°F after field calibration, 32 to 176°F -50 to 257°F Pipe-Clamp Thermocouple 3/8” to 1 3/8” for Air

Conditioning




Tools and Test InstrumentsInstruments FlukeAnemometersMini Vane Anemometer

Features: Pocket size, compact design Measures: air velocity, temperature, humidity, dew point, wet bulb, wind-chill and ambient temperature Selectable wind units: KNT (Knot), BF (Beaufort), ft/m (feet per minute), M/h (mile per hour), m/s (meter per

second), km/h (kilometer per hour) Selectable temperature units deg-C or deg-F Max wind speed display Quick measurement response External temperature probe Easy, two-button operation, Data hold Auto power off with disable feature, Low battery ind ication Ergonomic design with a wrist strap Included Accessories: Battery (installed), users manual, external temperature probe, ergonomic wrist strap Specifications:

Wind Speed Range 0.5 - 44.7 MPH, 60 - 3937 FT/M, 0.4-38.8KNT, 1.1-20.0 M/S, 0.7-72.0KMH, 1-8 BF

Wind Speed Accuracy +/-5% of reading or last significant digit (whichever is greater) Wind Speed Response averaging every 2 seconds Air Temperature Range 0deg-C to 50deg-C (32deg-F to 122deg-F) Air Temperature Resolut ion 0.1deg-C/deg-F Air Temperature Accuracy +/-1deg-C (+/- 30.2deg-F to 33.8deg-F) External Temperature Range -20deg-C to 70deg-C (-4deg-F to 158deg-F) External Temperature Resolution 0.1deg-C/deg-F

External Temperature Accuracy +/-0.6deg-C (+/- 31deg-F to 33.1deg-F) (-20deg-C to 50deg-C / -4deg-F to 122deg-F), other ranges +/-1.2deg-C (29.8deg-F to 34.2deg-F)

Air RH% Range 5%RH to 95% RH Air RH% Resolution 0.1% RH Air RH% Accuracy +/-3.5% RH (at 25C, 10 – 90% RH, other ranges +/- 5% Temperature Response Time 60 seconds (typical) Air RH% Response Time 60 seconds (typical) LCD Update every second Storage RH% <90%

http://www.fluke.com/fluke/usen/home/default

Part Number Battery Type LCD DescriptionTMA5 CR2032 21(H)x 34(W) mm Mini-Vane Anemometer, Measures: Air Velocity, Temperature,

Humidity, Dew Point, Wet Bulb, Wind-Chill and Ambient Temperature

CasesC25 Large Soft Case for DMMs

Features: Zippered carrying case with padding and inside pocket One year warranty


Part Number DescriptionC25 Large Soft Case for DMMs




Tools and Test InstrumentsInstruments FlukeCasesTPAK ToolPak, Meter Hanging Kit

Features: Solves almost any hanging and positioning problem The universal hanger allows to hang meter on nai ls, hooks and many other objects Compatible with many Fluke instruments One year warranty Kit includes: 9 inch hook and loop strap, Universal hanger clip, Hook hanger for non magnetic surfaces and a strong magnet


Part Number DescriptionTPAK ToolPak, Meter Hanging Kit

Clamp MetersFluke 373 True-rms AC Clamp Meter

Features: State of the art signal processing allows for use in noisy electrical environments while providing stable

readings Large, easy to read backlight display automatically sets the correct measurement range so you do not

need to change the switch positions while taking a measurement True-rms, Continuity, Hold, Backlight CAT IV 300 V, CAT III 600 V Three-year warranty Safety Conformance: EN/IEC 61010-1:2001; 600V CAT III, 300V CAT IV Measurement Capability: 600 A ac current measurement with fixed jaw 600 V ac and dc voltage measurement True-rms ac voltage and current for accurate measurements on non-linear signals Resistance measurement to 6000Ω with continuity detection 1000 µF capacitance measurement Included Accessories: Clamp meter, Test leads, Soft case, Users manual


OperatingPart Number Dimensions Altitude Temperature DescriptionFLUKE-373 232 x 85 x 45 mm 0 to 3000 m -14 to 122°F Fluke 373 True-rms AC Clamp Meter

Specification Range Accuracy Max Resolution

AC Current 600 A 0.1 A 2 % ± 5 digits AC Voltage 600 V 0.1 V 1 % ± 5 digits DC Voltage 600 V 0.1 V 1 % ± 5 digits Resistance 6000 Ω 0.1 Ω 1 % ± 5 digits

Capacitance 10 µF to 1000 µF 1 µF 1.9 % ± 2 digits Wire capacity 750 MCM Safety rating CAT III 600 V, CAT IV 300 V




Tools and Test InstrumentsInstruments FlukeClamp MetersFluke 902 True-rms HVAC Clamp Meter

Features: Designed for HVAC applications with capacitance, DC Current (µA), and temperature measurements Small body and jaws fit perfectly in your hand and into tight places Handy 'Display Hold' button keeps measurements on the display Meter controls are positioned so current measurements can be done with one hand Large, backlit display is easy-to-see in less than ideal conditions Auto shut-off maximizes battery life so the meter works when you need it Three year warranty More Applications: Capture flue gas temperatures Conduct flame rod testing Measure start and run motor capacitors Measure supply side current and voltage as well as load side current and voltage Measure current and voltage phase balance on 3 phase systems Troubleshoot compressor electrical motor faults Measure performance of variable frequency drives Includes: AA Alkaline batteries (2) Users manual w/safety information Soft carrying case TL75 Test Leads (1 pair) 80BK Integrated DMM Temperature Probe (1)


Part Number Continuity Weight DescriptionFLUKE-902 <= 30 Ω 1.5 Lbs. True-rms HVAC Clamp Meter

Specifications: Range Accuracy Voltage DC 0 – 600.0 V 1% ± 5 counts Voltage AC (True RMS) 0 – 600.0 V 1% ± 5 counts (50/60 Hz) Current AC (True RMS) 0 – 600.0 A 2.0% ± 5 counts (50/60 Hz) Current DC 0 - 200.0 µA 1.0% ± 5 counts Resistance 0 – 9999 Ω 1.5% ± 5 counts

-10 degree C to 400 degree C +/- 1.0% + 0.8 degree C Temperature* (Type K Thermocouple) -40 degree C to -10 degree C +/- 5.0% + 1.5 degree C Capacitance 1-1000 µF 1.9% ± 2 counts

* Error does not include Type K Thermocouple errors




Tools and Test InstrumentsInstruments FlukeClamp MetersSwivel Clamp Meter w/ Temperature and Capacitance - 400A

Features: 180 degree rotating head for the perfect display viewing Advanced VoltTect non-contact voltage detection Slim jaw design with one hand operation Measures AC Current up to 400 ACA, AC/DC Voltage up to 600V, Resistance and Capacitance Temperature measurement Audible continuity Auto and manual ranging respectively for quick checks and precise measurements Auto power off Data hold Accommodates conductors up to 1.18” (30mm) in diameter Test leads, battery (installed), Users Manual, Carrying Case and type-K thermocouple are included with

the product

Display 3-3/4 digit liquid crystal display (LCD) with a maximum reading of 3999.Polarity Automatic, positive implied, negative polarity indication.

Low battery indication The “ “ is displayed when the battery voltage drops below the operating level.

Auto power off Approx. 10 minutes. Measurement rate 2 times per second, nominal. Operating Environment 0°C to 50°C / 32°F to 122°F at <70% relativehumidity.

Storage Temperature 20°C to 60° / -4°F to 140°F, 0 to 80% R.H. with battery removed from meter.

Accuracy Stated accuracy at 74°F ±8°F, <75% relative humidity. Temperature Coefficient 0.1 × (specified accuracy) per °F, (32°F to 66°F, 82°F to 122°F). Altitude 6561.7 Feet (2000m). Jaw opening capability 30mm (1.18 in) conductor. Power 1.5 volt battery x2, R03/SIZE AAA. DC Volts Ranges 400mV, 4V, 40V, 400V, 600V AC Volts (50Hz - 500Hz) Ranges 4V, 40V, 400V, 600V AC Current (50Hz - 60Hz) Ranges 40A , 400A Resistance Ranges 400 , 4k , 40k , 400k , 4M, 40M Capacitance Ranges 4uF , 40uF , 400uF , 4mF Temperature Range -30°F ~ 400°F, -35°C ~ 400° Continuity Range 400

Non-Contact Voltage Indicator Sense voltage 70V to 600VAC (50Hz ~ 60Hz) beeper chirps and big bright red LED comes on, works when meter dial is on any ranges

Battery Life 150 hours typical with carbon-zinc. 300 hours typical with alkaline


Part Number Altitude Continuity DC Ranges DescriptionACD-21SW 6561.7 feet -30°F ~ 400°F 400mV, 4V, 40V, 400V, 600V Swivel Clamp Meter with Temperature and Capacitance - 400A




Tools and Test InstrumentsInstruments FlukeClipsAC72 Alligator Clip Set

Features: Slide-on alligator clips (red, black) for TL71/TL75 Jaws provide 8 mm opening CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty


Part Number DescriptionAC72 Alligator Clip Set, 1000V V

Digital MultimetersFluke 116 HVAC Multimeter with Temperature and Microamps

Features: Built-in thermometer for HVAC applications Microamps to test flame sensors Low input impedance: helps prevent false readings due to ghost voltage Large white LED backlight to work in poorly lit areas Resistance, continuity, frequency and capacitance Min/Max/Average with elapsed time to record signal fluctuations Compact ergonomic design for one-handed operation Compatible with optional magnetic hanger (ToolPak) CAT III 600 V safety rated Includes: 4 mm silicone test lead set, 80BK Integrated Temperature probe Holster Installed 9 V battery User manual Specifications: Maximum voltage between any terminal and earth ground 600V

Surge protection 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2 Display Digital: 6,000 counts, updates 4/sec Battery type 9 volt Alkaline, NEDA 1604A/ IEC 6LR61 Battery Life 400 hours typical, without backlight Bar graph 33 segments, updates 32 per second

.


TemperaturePart Number Dimensions Operating Storage Weight DescriptionFLUKE-116 6.57" x 3.31" x 1.82" -10 °C to + 50 °C -40 °C to + 60 °C 550g HVAC Multimeter with Temperature and Microamps




Tools and Test InstrumentsInstruments FlukeDigital MultimetersFluke 116 HVAC Multimeter with Temperature and Microamps

Accuracy Specifications: Measurement Range Resolution Accuracy ± ([% of reading] + [counts]) DC millivolts 600.0 mV 0.1 mV 0.5 % + 2

6.000 V 0.001 V 60.00 V 0.01 V DC volts 600.0 V 0.1 V

0.5 % + 2

Auto volts 600.0 V 0.1 V 2.0 % + 3 (dc, 45 Hz to 500 Hz) 4.0 % + 3 (500 Hz to 1 kHz)

AC millivolts¹ true-rms 600.0 mV 0.1 mV 1.0 % + 3 (dc, 45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)

6.000 V 0.001 V 60.00 V 0.01 V AC volts¹ true-rms 600.0 V 0.1 V

1.0 % + 3 (45 Hz to 500 Hz) 2.0 % + 3 (500 Hz to 1 kHz)

Continuity 600 Ω 1 Ω Beeper on < 20 Ωoff > 250 Ω; detects opens or shorts of 500 µs or longer.

600.0 Ω 0.1Ω 0.9 % + 2 6.000 kΩ 0.001 kΩ 60.00 kΩ 0.01 kΩ 600.0 kΩ 0.1 kΩ 6.000 MΩ 0.001 MΩ

0.9 % + 1 Ohms

40.00 MΩ 0.01 MΩ 1.5 % + 2 Diode test 2.000 V 0.001 V 0.9 % + 2

1000 nF 1 nF 10.00 µF 0.01 µF 100.0 µF 0.1 µF

1.9 % + 2

9999 µF 1 µF 100 µF to 1000 µF 1.9 % + 2

Capacitance

> 1000 µF 5 % + 20 Lo-Z capacitance 1 nF to 500 µF 10 % + 2 typical

-40 °C to 400 °C 0.1 °C 1 % + 102 Temperature² (Type-K thermocouple) -40 °F to 752 °F 0.2 °F 1 % + 182

AC µamps true-rms (45 Hz to 500 Hz) 600.0 µA 0.1 µA 1.5 % + 3 (2.5 % + 3 > 500 Hz) DC µamps 600.0 µA 0.1 µA 1.0 % + 2

99.99 Hz 0.01 Hz 999.9 Hz 0.1 Hz 9.999 kHz 0.001 kHz Hz (V or A input)³

50.00 kHz 0.01 kHz

0.1 % + 2

Notes: 1 All ac voltage ranges except Auto-V/LoZ are specified from 1 % to 100 % of range. Auto-V/LoZ is specified from 0.0 V. Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display nonzero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of < = 3 at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled. Auto-V LoZ, and ac mV are dc-coupled. 2 Temperature uncertainty (accuracy) does not include the error of the thermocouple probe. 3 Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage. Frequency is dc coupled, 45 Hz to 5 kHz for ac current.




Tools and Test InstrumentsInstruments FlukeDigital MultimetersFluke 116/322 HVAC Combo Kit

Includes: Fluke 116 Multimeter with Temperature,Fluke 322 Compact Clamp Meter Fluke TL75 Hard Point Test Lead Set,TPAK ToolPak Magnetic Meter Hanging Kit C115 Deluxe carrying case with shoulder strap,80PK-11 Flexible Pipe clamp Thermocouple Fluke 80AK thermocouple adapter,80PK-1 thermocouple bead probe 3-year product warranty on Fluke-116 DMM, 2-year warranty on Fluke-322 clamp meter and 1-year

warranty on accessories


Part Number DescriptionFLUKE-116/322 Fluke 116/322 HVAC Combo Kit

General Specifications: Fluke 116:

Maximum voltage between any terminal and earth ground 600 V

Surge protection 6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2 Display Digital: 6,000 counts, updates 4/sec Bar graph 33 segments, updates 32/sec Operating temperature -10 °C to + 50 °C Storage temperature -40 °C to + 60 °C Battery 9 volt Alkaline, NEDA 1604A/ IEC 6LR61 Battery life 400 hours typical, without backlight

Fluke 322: Operating temperature -14 °F to 122 °F Altitude 2,000 meters Battery life (2) AAA carbon zinc approximately 100 hours continuous,

automatic low battery indicator Safety rating IEC 1010-2-031, 600 V CAT III Temperature de-rating < 18 °C, > 28 °C add 0.1 x specified accuracy / °C Storage temperature -22 °F to 140 °F Warranty Two years Measure ac current 40.00 A

400.0 A Measure ac voltage 400.0 V

600 V Measure continuity < = 30 Ω Measure dc voltage 400.0 V

600 V Higher resolution for loads below 40 amperes

0 - 40.00A 40.0 - 400.0A

Measure resistance 400.0 Ω




Tools and Test InstrumentsInstruments FlukeDigital MultimetersFluke 233 Remote Display Multimeter

Features: True-rms ac voltage and current for accurate measurements on non-linear signals Measure up to 1000 V ac and dc Measure up to 10 A 10,000 μF capacitance range Frequency to 50 kHz Built in thermometer conveniently allows you to take temperature readings without having to carry a

separate instrument Resistance, continuity and diode test Low power wireless technology allows the display to be carried up to 10 meters away from the point

of measurement for added flexibility. No interference with measurements The removable magnetic display can be conveniently mounted where it is easily seen Make measurements without holding the meter to improve visual focus on probes and augment safe

electrical measurements Use as a conventional multimeter when the display is connected Radio transmitter automatically turns off when the display is connected to the meter Auto power off maximizes battery life Min/Max and Average recording to capture variations automatically Test continuity and diodes Easy to read display with large digits and bright backlight Battery life approximately 400 hours General Specifications:

AC true-rms Yes Ranging Auto/Manual Backlight Yes Battery type AA alkaline Safety rating CAT IV 600 V/CAT III 1000 V External protection Rubber overmold


Part Number Battery Life Counts Dimensions Temperature Range DescriptionFLUKE-233 400 hours 6000 2.08" x 3.6" x 7.6" -40 °C to +400 °C TRMS Remote Display Digital Multimeter

Accuracy Specifications: Range Accuracy Resolution DC Voltage 0.1 mV to 1000 V 0.25 % + 2 AC Voltage 0.1 mV to 1000 V 1.0 % + 3 DC Current 1 mA to 10 A 1.0 % + 3 AC Current 1 mA to 10 A 1.5 % + 3 Capacitance 1 nF to 9999 μF 1nF Frequency 5 Hz to 50 kHz 0.01Hz Resistance 0.1 Ω to 40 MΩ




Tools and Test InstrumentsInstruments FlukeElectrical TestersFluke 1AC-II / 1LAC-II VoltAlert

Features: Voltbeat technology and continuous self-test Upon detection, tip glows and beeper sounds, CAT IV 1000 V for added protection Expanded range: 90 V to 1000 V AC or 200 V to 1000 V AC depending on model 20 V to 90 V AC control circuit model also available, Two-year warranty


Part Number Operating Altitude DescriptionFLUKE-1LAC-A-II 3000 m Low Voltage Non-Contact AC Voltage Detector 20-90 VACSpecifications:

Operating principle Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.

Voltage sensing ranges Nominally, 90 V AC to 1000 V AC or 200 V AC to 1000 V AC depending on model, 45 Hz to 405 Hz; also a 20 V to 90 V control circuit model

Detector tip style Blade or round, depending on model Light source One high intensity red LED Agency Approvals c CSA us, CE, C-Tick Safety Rating 1000 V, CAT IV IP Rating IP 40 Operating humidity ranges 0 % to 95 % (0 °C to 30 °C), 0 % to 75 % (30 °C to 40 °C), 0 % to 45 % (40 °C to 55 °C) Batteries 2 AAA alkaline batteries included

Fluke 2AC VoltAlert Voltage DetectorFeatures: Voltage detection from 90 to 1000 V ac, suitable for a wide range of residential, commercial and

industrial, needs. NEW! Always on, using special low power circuitry to sustain battery life and ensure your 2AC is

always ready. NEW! Innovative ‘Battery Check’ button function ensures battery is in good condition* Category IV – 1000 V overvoltage rated product for best in class user protection Integrated clip design, optimized for pocket storage, Powered by 2x AAA batteries Fluke ruggedness and reliability, Two-year warranty


OperatingPart Number Altitude Temperature DescriptionFLK2AC/90-1000VC 2000 m (CAT IV 1000 V) -10 °C to 50 °C VoltAlert Voltage Detector. 90-1000V, straight tip for North

American style outlets.Specifications: Operating principle Senses the steady state electrostatic field produced by ac voltage through insulation without requiring contact

to the bare conductor. A red glow at the tip indicates the presence of voltage. Safety Compliance Meets IEC 61010-1:2001, UL 61010-1 (2nd ed.), CAN/CSA-C22.2 No. 61010-1-04, and ISA-82.02.01

Pollution Degree 2 EMC Compliance Meets IEC 61326-1:2006 Operating 90 V ac to 1000 V ac, CAT IV 1000 V rated Humidity 0 % to 95 % (0 °C to 30 °C), 0 % to 75 % (30 °C to 40 °C), 0 % to 45 % (40 to 55 °C) Cleaning Clean with damp cloth Battery Life Typical battery life of greater than one year

*Use of Battery Check function is optional and for convenience only, it is not intended as a substitute for checking the unit on a known live source before and after us




Tools and Test InstrumentsInstruments FlukeElectrical TestersFluke T5-600 Voltage, Continuity and Current Tester

Features: Automatically measures volts ac and volts dc with precise digital resolution Displays resistance to 1000Ω Easy and accurate OpenJaw current measurement Continuity beeper,Compact design with neat probe storage Rugged enough to withstand a 10-foot drop Detachable SlimReach probe tips are customized for national electrical standards Test leads accept Fluke accessory test clips 600V model,Can stay connected much longer than solenoid type tester Auto off mode to conserve battery life Optional holster attaches to a belt and neatly stows test leads AC current,Display hold Includes: 600V Voltage, continuity and current tester 4 mm detachable probes,Instruction sheet Specifications: Max wire size 1/0 THHN Cable Current range ac rms 0 to 100.0 A Accuracy ac current (50/60 Hz) 3 % ± 3 counts AC Response Averaging Voltage range ac 0 to 600 V Accuracy ac voltage 1.5 % ± 2 counts Voltage range dc 0 to 600 V Accuracy dc voltage 1 % ± 1 count Resistance range 0 to 1000 Ω Continuity beeper threshold On at <25 Ω, off at >400 Ω Volts indicator LED threshold Guaranteed on by 30 V ac

Humidity (w/o Condensation) 0 % to 95 % (5 °C to 30 °C); 0 % to 75 % (30 °C to 40 °C); 0 % to 45 % (40 °C to 50 °C)

Dust/water resistance Yes Temperature Coefficient 0.1 x (specified accuracy)/°C (<18 °C or >28 °C) Overvoltage category CAT III 600 V ac/dc (EN61010-1) Agency Approvals UL, CSA, and VDE Maximum voltage Between any terminal and earth ground Warranty Two-years Battery type 2 x AA Low battery indicator Yes Current sensor opening 12.9 mm Calibration cycle 1 year

Type: Heavy duty, flexible leads rated for 1000V use. Field replaceable leads terminate in male shrouded banana plugs Probes: One red, one black. Detachable Slim-Reach probe tips

Leads:

Styles: TP1 Slim Reach Test Probes


OperatingPart Number Battery Life Altitude Temperature Jaw Opening DescriptionT5-600 USA 200 hour zinc chloride, 400 hour alkaline 2000 m -10 °C to 50 °C 12.9 mm Voltage Continuity and Current Tester, 600V




Tools and Test InstrumentsInstruments FlukeElectrical TestersNon-Contact VoltProbe

Features: 3 way voltage alert: - It beeps, - It lights, - It vibrates Non-contact method of voltage testing Test for AC voltage cables, circuit breakers, wall sockets, junction boxes, fuses and breaks in wires Totally insulated, no exposed metal or conductive parts CAT III 600V CE EMC EN 61326-1:2006 One year warranty Specifications: Operating voltage 100-600 VAC Environment < 2000m, indoor operation Sensitivity Illuminates red, vibrates and beeps at 4mm (0.16”) distance from a wire carrying

120 VAC.


Part Number Dimensions Operating Temperature Power DescriptionVP-600SB 132 x 28 x 23mm 41deg-F to 104 deg-F; < 90%

RH(2) AAA batteries 1.5 volts

alkalineNon-Contact VoltProbe with Shaker/Buzzer,100-600V

Gas Detectors & AnalyzersCarbon Monoxide Meter with Adjustable CO Levels

Features: Adjustable CO warning level The CM100’s alarm is preset to 25ppm to warn about possible danger User can adjust the alarm level by choosing CO gas levels: 25, 30, 35, 45, 50, 70, 100 and 200ppm Dual digital display Backlight for viewing in dim areas Auto Power Off Self-Test feature Comes with three AAA batteries, carrying case and manual Accuracy:± 20% at 0 – 100 ppm ± 15% at 100 – 500 ppm (at 20 °C +/-5%, 50 +/-20% RH) Battery: 3 X 1.5V AAA Size (NEDA 24G or IEC R03) battery Battery Life: 250 hours without backlight; 35 hours with backlight Safety:CE


Part Number Dimensions Range Resolution DescriptionCM100 175 x 47 x 28 mm 0-999 ppm 1ppm Carbon Monoxide Meter with Adjustable CO Levels




Tools and Test InstrumentsInstruments FlukeInfrared ThermometersFluke 561 Infrared and Contact Thermometer

Features: IR thermometer for quick measurements up close, or at a distance, without a ladder Contact thermometry capability, compatible with all standard mini-connector type K thermocouples Fabric hook-and-loop fastener pipe probe for superheat and sub-cooling and other contact and ambient

measurements Sing le-point laser sighting Easy emissivity adjustment (Lo, Med, Hi) for measuring pipes and other shiny materials more accurately Lightweight (just 12 ounces/340 grams) and portable Very easy to use Efficient-no need to shut down equipment when making IR measurements MIN, MAX, and DIF functions help you quickly identify problems Scan large areas or small objects quickly and efficiently Two-year Warranty Includes: 561 IR thermometer K-Type thermocouple fabric hook-and-loop fastener pipe probe Hard carrying case 2 AA batteries Users manual Specification: Temperature Range Display accuracy [Assumes ambient operating temperature of 23 °C to 25 °C

± 1.0 % of reading or ± 1 °C, whichever is greater; below 0 °C, ± 1 °C ± 0.1°/1°

Backlit display Yes, LCD with dual temperatures (current and MAX/MIN/DIF/KTC), low battery, F/C indicator, and Scan/Hold options

D:S (Distance to spot size) 12:1

Easy emissivity selector Adjustable with three settings: low (0.3), medium (0.7). high (0.95)

Repeatability ± 0.5 % of reading or ± 1 °C, whichever is greater Spectral Response 8 µm to 14 µm Laser sighting Single-point laser Laser shutoff Laser turns off above ambient temperature of 40 °C

Laser power Class 2 (II) operation; output <1 mW, wavelength 630 nm to 670 nm

Relative humidity 10 % to 90 % RH non-condensing, at < 30 °C

Thermocouple type K mini-adapter input Yes, compatible with industry standard type K probes with mini-connector

Thermocouple type K Velcro pipe probe Yes, with a temperature range of 0 °C to 100 °C and accuracy of ± 2.2 °C


Part Number Battery Life Display Hold Operating Temperature DescriptionFLUKE-561 12 hours 7 seconds 0 °C to 50 °C Infrared and Contact Thermometer HVAC/R Professionals




Tools and Test InstrumentsInstruments FlukeInfrared ThermometersFluke 62 Mini Infrared Thermometer

Features: Single point offset laser sighting, Best accuracy in its class: + 1% of reading Holds temperature readings for 7 seconds, Backlit display for poorly lit areas Dual displays shows current and MAX measurements simultaneously Comfortable ergonomic handle with protective rubber boot for added durability Fitted carrying case, Robust, award winning design, Two years (conditional) Warranty Specifications:

Accuracy 10 ºC to 30 ºC (50 ºF to 86 ºF): ± 1 ºC (2 ºF) Outside 10 ºC to 30 ºC (50ºF to 86 ºF):± 1.5 ºC (3 ºF) or ± 1.5 % of reading,whichever is greater

Repeatability ±0.5 % of reading or < ±1 °C (±2 °F), whichever is greater Emissivity Preset 0.95 Response time < 500 mSec Distance to spot size 10:1 calculated @ 80 % energy Spectral range 6.5–18 microns thermopile detector Display hold (7 seconds) Yes LCD backlit Yes Temperature display °C or °F selectable Ambient operating range 0 to 50 °C (32 to 120 °F) Relative humidity 10-90 % RH non-condensing, @ up to 30 °C (86 °F) Typical distance to target spot) Up to 2 m (6 ft) Laser class II Single offset laser Power 9 V Alkaline battery (included) Battery life (alkaline) 12 hours Storage temperature -20 ºC to 65 ºC (-4 ºF to 150 ºF) without battery Options/accessories: Includes protective boot and storage holster

[


Part Number Battery Life Dimensions DescriptionFLUKE-62 12 hours 152 mm x 101 mm x 38 mm Mini Infrared Thermometer, Infrared Thermometer Gun

Infrared Thermometer GunFeatures: Extremely accurate and reliable, Rapid response time, Dual LCD display with backlight Precise measurement with distance to spot ratio from 10:1 to 50:1, Selectable ºF and ºC Wide temperatures ranges available up to -58 F to 2822 F (-50 C to 1550 C) Laser pointer for accurate targeting, 8 seconds auto display hold for easy read-out Adjustable emissivity for measuring a variety of materials, One year warranty Includes: Battery and Instruction Manual Specifications: Repeatability Plus/minus 0.5 percent of reading or plus/minus 1 F, whichever is greater Spectral Response 8µm to 14µm Minimum Spot Size 20mm Temperature Display F/C selectable Display Hold 8 seconds Battery Life 10 hours with laser and backlight on 30 hours with laser and backlight off


Part Number Laser Laser Power Out Laser Wave Length DescriptionIR-710 Single point > 1mW Class 2 630 to 670nm 10:1 Infrared Thermometer Gun




Tools and Test InstrumentsInstruments FlukeInfrared ThermometersPen Type IR Thermometer

Part Number DescriptionIR-500 Pen Type IR Thermometer

Laser Distance MetersFluke 411D Laser Distance Meter

Features: Reduction of estimation errors The most advanced laser technology for distance measurement Instant measurements of the distance between two objects with one-button operation Easy targeting with bright laser Measurement to 30 m (100 ft) with accuracy of 3 mm (0.12 in) Quick calculations of distance formulas such as area (square feet/meters) and volume Easy performance of distance addition and subtraction calculations Pythagoras function for indirect measurement via two other measurements Improved battery life from automatic shut-off feature Display holds for easier viewing in hard-to-reach areas Two-year warranty Includes: 411D Laser Distance Meter Two AAA batteries Users manual on CD Quick start guide Nylon carrying case Specification:

Range (for extended distances, use a target plate) 0.1 m to 30 m Measuring Accuracy ± 3 mm* Laser class Class II Laser type 635 nm, < 1 mW Automatic power off after 180 seconds Continuous Measurement Yes Addition/subtraction Yes Pythagoras (Indirect measurement) Simple Storage humidity (at 35 °C) maximum 85 % for 24 h

* In favorable conditions (optimal target surface, room temperature) up to 10 m. In unfavorable conditions, such as intensive sunshine, very weakly reflecting target surface, or large temperature fluctuations, measuring accuracy may deteriorate to approx. ± 0.25 mm/m (± 0.003 in/ft) for distances above 10 m.


OperatingPart Number Battery Life Dimensions Altitude Temperature DescriptionFLUKE-411D up to 3,000 measurements 123 mm x 50 mm x 26 mm 3500 m 0 °C to 40 °C Laser Distance Meter




Tools and Test InstrumentsInstruments FlukeMultimeters600A Clamp-On Multimeter with Dual Display

Features: Dual displays – permits simultaneous reading of amperage and voltage AC Current to 600A New thin jaws, 5mm thinner than others to access tight measurement spaces Micro amps measurement for testing flame sensors Temperature with K-type thermocouple probe AC and DC Voltage to 600V Continuity buzzer Frequency measurement Diode test Hold and maximum reading functions In rush current Accommodates conductors up to 28 mm (1.1) in diameter Auto ranging Auto power off and low battery indication Rubber over-molded case One Year Warranty Standards and certifications: EN, IEC and EN safety standard 61010-1, CE and UL Specifications:

Maximum direct current (DC) voltage input 600V Maximum resistance detected 40 megaohms Maximum capacitance detected 3,000 microfarads Maximum frequency detected 100 ki lohertz (kHz) Maximum AC microamp input 2,000 microamp Maximum DC microamp input 2,000 microamp Temperature measurement range -4 to 999 degrees Fahrenheit (F)/-20 to 537

degrees Celsius (C) Power supply 3V IEC-CR2032 coin batteries (two, installed)


Part Number Dimensions Weight DescriptionACD-14 PLUS 190 x 63 x 32 mm 0.5 Lbs. 600A Clamp-On Multimeter with Dual Display




Tools and Test InstrumentsInstruments FlukeMultimetersAdvanced HVAC Multimeter

Features: AC/DC Voltage up to 1000V, ac/dc current, resistance, frequency, capacitance, temperature, duty cycle. Dual thermocouple to take simultaneous temperature readings on low and high side of an HVAC system Low pass filter for variable frequency drives VolTect Non-contact voltage detection Audible continuity Diode test Dual reading backlit LCD display with analog bar graph Data hold Max/min memory Peak hold (crest) Relative zero mode Built in work light Built in test leads storage and “third hand” test lead holder Warning against improper test leads connection Auto and manual ranging Auto power off and low battery warning Safety rated: CAT IV 600V, CAT III 1000V Includes: Batteries (Installed): 9V (6F22) x1, Test Leads, K-type probe x2, Temperature Adaptor, Velcro Strap, Carrying Case and User’s Manual


Part Number DescriptionAM-540 Electrical / HVAC Special Multimeter

Specifications: Range Best Accuracy

AC Voltage 6.000 / 60.00 / 600.0 / 1000 V ±(1.0% Rdg + 3 LSD) @ 45 Hz to 400 Hz, 0 V to 600 V

DC Voltage 600.0 mV 6.000 / 60.00 / 600.0 / 1000 V ±(0.5% Rdg + 2 LSD) @ 6 V to 600 V ranges

Resistance 600.0 Ohms 6.000 / 60.00 / 600.0 kOhms 6.000 / 60.00 MOhms

±(1.0% Rdg + 2 LSD) @ 6 kOhms to 600 kOhms ranges

AC Current 600.0 μA / 6000 μA 60.00 mA / 500.0 mA / 10.00 A

±(2.0% Rdg + 5 LSD) @ 45 Hz to 400 Hz

DC Current 600.0 μA / 6000 μA 60.00 mA / 500.0 mA / 10.00 A

±(1.5% Rdg + 3 LSD)

Frequency 60.00 / 600.0 Hz 6.000 / 60.00 / 600.0 kHz 6.000 / 60.00 MHz ±(0.1% Rdg +

Duty cycle 10.00% to 90.00% ±(1.2% Rdg + 30 LSD) @ 5Hz to 2 kHz

Capacitance 60.00 / 600.0 nF 6.000 / 60.00 / 600.0 / 6000 μF 60.00 mF ±(3.0% Rdg + 5 LSD) @ 600 nF to 60 μF ranges

Temperature -40 °F to 1832 °F / -40 °C to 1000 °C °F: ±(1.0% rdg + 12) @ >104 °F to 752 °F / °C: ±(1.0% rdg + 8) @ >40 °C to 400 °C

Number of temperature inputs Dual Thermocouple




Tools and Test InstrumentsInstruments FlukeMultimetersHVAC Digital Multimeter

Features: Measurements: voltage up to 750Vac and 1000Vdc, ac/dc current, resistance, frequency, capacitance,

temperature. VolTect Non-contact voltage detection Built-in test leads storage and “third hand holder” Audible continuity Diode test Data hold Max/min memory Relative zero mode Built-in flashlight Auto and manual ranging Auto power off and low battery warning Backlit LCD display with analog bar graph Velcro strap to hang a meter Safety rated: CAT III 600V, CAT II 1000V Includes: Batteries (Installed): 9V (6F22) x1, Test Leads, K-type probe x1, Velcro Strap, Carrying Case and User’s Manual


Part Number DescriptionAM-520 Electrical / HVAC Contractor Multimeter

Specifications: Range Best Accuracy

AC Voltage 400 mV 4.000 / 40.00 / 400.0 / 750 V ±(1.0% Rdg + 3 LSD) @ 45 Hz to 400 Hz, 4 V to 400 V ranges

DC Voltage 400 mV 4.000 / 40.00 / 400.0 / 1000 V ±(0.8% Rdg + 1 LSD) @ 4 V to 400 V ranges

Resistance 400.0 Ohms 4.000 / 40.00 / 400.0 kOhms 4.000 / 40.00 MOhms

±(1.0% Rdg + 2 LSD) @ 4 kOhms to 400 kOhms ranges

AC Current 400.0 / 4000 µA 40.00 / 400.0 mA 4.000 / 10.00 A

±(1.2% Rdg + 3 LSD)

DC Current 400.0 / 4000 µA 40.00 / 400.0 mA 4.000 / 10.00 A ±(1.0% Rdg + 2 LSD)

Frequency 10 Hz to 10 MHz ±(0.1% Rdg + 4 LSD)

Capacitance 40.00 / 400.0 nF 4.000 / 40.00 / 400.0 / 4000 µF ±(3.0% Rdg + 5 LSD) @ 400 nF to 40 µF ranges

Temperature -40 °F to 1832 °F -40 °C to 1000 °C

°F: ±(1.8% rdg + 6 °F) @ >32 °F to 212 °F °C: ±(1.2% rdg + 3 °C) @ >0 °C to 100 °C

Number of temperature inputs Single Thermocouple




Tools and Test InstrumentsInstruments FlukePsychrometerFluke 971 Temperature Humidity Meter

Features: Backlit dual display of humidity and temperature Measures dew point and wet bulb temperatures, Ergonomic design with belt clip and protective holster Quick-response capacitance sensor, Compact and lightweight (188 g/6.6 oz) Min/Max/Avg Data hold, Low battery indicator Includes: Operation manual, 4 AAA alkaline batteries


Part Number Battery Life Data Storage Capacity Dimensions Humidity DescriptionFLUKE-971 200 hours 99 points 194mm x 60mm x 34mm 5% to 95% RH Temperature Humidity Meter

Specifications:

Temperature Accuracy 0°C to 45°C (±0.5°C) -20°C to 0°C & 45°C to 60°C (±1.0°C)32°F to 113°F (±1.0°F) -4°F to 32°F & 113°F to 140°F (±2.0°F)

Relative Humidity Accuracy 10% to 90%RH @ 23 °C (73.4°F) (±2.5%RH) (<10%, > 90%RH @23°C (73.4°F) (±5.0%RH)

Temperature Sensor Type NTC Humidity Sensor Electronic capacitance polymer film sensor Response Time (Humidity) For 90% of total range - 60 sec. with 1m/s air movement

Environmental Specifications: Operating Temperature Temperature: -20°C to 60°C Humidity: 0°C to 55°C Storage Temperature -20°C to 60°C at < 80% R.H. (with battery removed)

Relative Humidity Temperature MeterFeatures: Relative humidity (RH), temperature, wet bulb, and dew point meter is used for HVAC, indoor air quality,

and environmental applications, Dual-scale thermometer measures wet- and dry-bulb temperature and dew point in F and C Capacitive humidity sensor ranges from 0 to 100 percent relative humidity (RH) Data hold for recording data, and minimum, maximum, and relative temperature readings Extended probe with protective cover reaches inside ducts and other hard to reach areas Includes: 9 V Battery, Soft Carrying Case and Instructions Warranty: 1 year Specifications:

Relative Humidity Range 0 to 99% Humidity Accuracy +/-3% Absolute Humidity Range 0 to 99% Dew Point Range -4 Degrees to 140 Degrees F Wet Bulb Temperature Range -4 to 140 Degrees F Humidity Resolution 0.10% Temp. Resolution (F) 0.1 Degrees


Part Number Battery Type Dimensions DescriptionTHWD-3 9V 240 x 54 x 34 mm Digital Sling Psychrometer with Dew Point & Wet Bulb




Tools and Test InstrumentsInstruments FlukeTest Leads and Probes80AK-A Thermocouple Adapter

Features: Adapts Type-K thermocouple mini-connector to dual shrouded banana plug inputs Measurement range and accuracy: probe dependent Suitable for low voltage applications(below 30 V AC, 60 V DC) One year warranty


Part Number Description80AK-A Thermocouple Adapter - Type-K

80PK-1 Bead ProbeFeatures: Type-K thermocouple for general purpose applications Measurement range: -40 to 260°C One year warranty Specifications: Accuracy (with respect to NBS tables for Special Grade)

±1.1°C over the range of 0°C to 260° Typically within 1.1°C of NBS Tables over the range of -40°C to 0°C

Output @ 25°C = 1.00 mV (Reference junction at 0 °C) Seebeck Coefficient 25°C = 40.50 μV / °C Measurement Time (Time Constant) 2 seconds Maximum Voltage Rating 24V ac rms or 60V dc maximum for proper safe operation. Maximum Temperature of Bead 260°C Cable Length: 40 inches Cable Insulation Material:Teflon Maximum Temperature: 260°C Conductor K Type Size : AWG #24 solid Length: 48 inches nominal Polarity and Color Coding Chromel: + yellow Alumel: - red Outer Jacket: black

Connector Type: yellow mini-thermocouple connector with 0.312-inch pin spacing

Material:Hytrel Maximum Temperature :200°C

Protection Class 3. Relates solely to insulation and grounding properties defined in IEC 348.


Part Number Description80PK-1 Thermocouple Bead Probe - Type-K




Tools and Test InstrumentsInstruments FlukeTest Leads and Probes80PK-8 Pipe Clamp Temperature Probe

Features: Type-K thermocouple for fast temperature and superheat measurements of pipe surfaces Durable ribbon sensor, One year warranty Measurement range: -29 to149 °C for pipe diameters from 6.4 to 34.9 mm Specifications:

Accuracy ±1.9 °C. Surface measurement accuracy of ±1.9 °C includes ±1.1°C var iation in alloy plus probe contact and shunting uncertainty of ±0.8 °C

Repeatability ± 0.56 °C Output @ 25 °C = 1.00 mV (Reference junction at 0 °C) Seebeck Coefficient @ 25 °C = 40.50 μV / °C Measurement Time (Time Constant) 0.5 seconds Maximum Voltage Rating 24 V ac rms, or 60 V dc Sensor Material Chromel-Alumel

Cable Insulation Material - PVC, Max Temperature- 105 °C, Min Temperature- -29 °C

Conductor K Type AWG #24 stranded Probe Body PBT, Max Temperature- 149 °C,Min Temperature- -29 °C Connector Mini-thermocouple connector with 7.925 mm pin spacing Media Limitations Must be compatible with chromel, alumel, and PBT


Part Number Cable Length Description80PK-8 40" Pipe Clamp Temperature Probe - Type-K

TL175 TwistGuard Test LeadsFeatures: Patented TwistGuard extendable tip shroud meets the highest electrical safety requirements to

reduce tip exposure while providing the versatility needed for most measurements New WearGuard lead wire wear indication. Each test lead is covered by two layers of silicone

insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement

Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.

Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.

Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs, Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2

TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip Probes always show correct category rating for tip being used Exposed probe tip length - 19 mm to 4 mm,Conforms to EN61010-031, One-year warranty


OperatingPart Number Altitude Temperature Description175 2000 m -20 °C to 55 °C TwistGuard Test Leads




Tools and Test InstrumentsInstruments KleinBorescopesVideo Borescope

Features: Use to view inaccessible areas Features video, audio, photo recording, file playback, a durable camera snake with an adjustable

work light, and video output capabilities, Multiple applications: Electrical, HVAC, Plumbing, Automotive, Aircraft, Internal Memory: ~65MB,SD Card Memory: 32GB max SD or SDHC

Battery Specification: "18650" Lithium Ion 3.7V 2000mAh.Battery Life (Typical): 8 hours without worklight

http://www.service.kleintools.com/Tool/PRD/Catalog/

Part Number Gooseneck Length Batteries Color Depth DescriptionET500 3.28’ Rechargeable 24 Bits Video Borescope - An Extendable Video Camera Used to

View Inaccessible Areas

Clamp Meters400A AC/DC TRMS Clamp with Temperature

Features: True RMS; DC Current, Backlit display and worklight, Magnetic mount and lead storage Non-Contact Voltage Tester, Analog bar graph, Temperature Includes case, test leads, thermocouple, and batteries Auto-ranging clamp meter measures AC/DC voltage, AC/DC current, resistance, capacitance,

frequency, duty cycle, and temperature,Also tests non-contact voltage, diodes and continuity Calibration: Accurate for one year,CAT Rating: CAT III 600


Part Number Dimensions Humidity Operating Altitude DescriptionCL2100 8.875" x 3.375" x 1.5" 80% max 2000m 400A AC/DC TRMS Clamp with Temperature

Electrical Specifications: DC Voltage Measurement

Range Resolution Accuracy 400mV ~ 400V 0.1mV ~ 1V ± (0.5% + 4 digits)

1000V 1V ± (0.8% + 10 digits) Overload Protection: 1000V AC Voltage Measurement


Overload Protection: 750V RMS Frequency Response: 45 to 400 Hz Minimum Voltage for Frequency Measurement: 200mV Response: True RMS DC Current Measurement

Range Resolution Accuracy 400µA 0.1µA

2000µA 1µA ± (1.2% + 3 digits)

40A 0.01A ± (2.5% + 15 digits) 400A 0.1A ± (1.5% + 8 digits)

Overload Protection: Voltage: 600V RMS Current: 2000µA




Tools and Test InstrumentsInstruments KleinClamp Meters400A AC/DC TRMS Clamp with Temperature

AC Current Measurement

Range Resolution Accuracy 40Hz ~ 2kHz

400µA 0.1µA ± (2.0% + 5 digits) 2000µA 1µA ± (1.5% + 5 digits)


Overload Protection: Voltage: 600V RMS Current: 2000µA Frequency: 45 to 400Hz Minimum Current for Frequency Measurement: 400µA or 20A Response: True RMS Resistance Measurement

Range Resolution Accuracy 400Ω ~ 4MΩ 0.1 Ω ~ 0.001M Ω ± (1.0% + 4 digits)

60MΩ 0.01M Ω ± (2.0% + 4 digits) Overload Protection: 600V RMS Capacitance Measurement

Range Resolution Accuracy 40nF ~ 4000µF 0.01nF ~ 1µF ± (3.5% + 6 digits)

Overload Protection: 600V RMS Frequency Measurement

Range Resolution Accuracy 99.99Hz ~ 499.9kHz 0.01Hz ~ 0.1kHz ± (0.1% + 4 digits)

Overload Protection: 600V RMS Sensor: 1.8V RMS Duty Cycle Measurement

Range Resolution Accuracy 0.1% ~ 99.9% 0.1% ± (0.2% per kHz + 0.1% + 5 digits)

Overload Protection: 600V RMS Diode Test

Overload Protection Range Test Current Open Circuit Voltage 600V RMS 2.0V Appx. 0.25mA < 1.6V DC (typ.)

Continuity Test Overload Protection Open Circuit Voltage

600V RMS < 0.44V Temperature Measurement

Range Resolution Accuracy -22°~14°F (-30°~-10°C) 0.1°F (0.1°C) ±5.4°F (±3.0°C) 15°~752°F (-9°~400°C) 0.1°F (0.1°C) ±(1.0% + [3.6°F or 2.0°C])

Overload Protection: 30V RMS Non Contact Voltage Detector

On Voltage Appx. 25V AC




Tools and Test InstrumentsInstruments KleinClamp Meters600A AC Clamp Meter with Temperature - Model CL1300

Features: Auto-ranging clamp meter measures AC/DC voltage, AC current, resistance, capacitance, frequency,

duty cycle, and temperature, Also tests non-contact voltage, diodes, and continuity Backlit display and work light, Magnetic mount and lead storage, Non-contact voltage tester Analog bar graph, Temperature, Includes case, test leads, thermocouple and batteries Calibration: Accurate for one year, CAT Rating: CAT IV 600V


Part Number Dimensions Humidity Operating Altitude DescriptionCL1300 7.65" x 2.56" x 1.375" 80% max 2000m 600A AC Clamp Meter with Temperature, Humidity 80%





Overload Protection: 750V RMS Frequency Response: 45 to 400 Hz Minimum Voltage for Frequency Measurement: 200mV Response: Averaging DC Current Measurement


2000µA 1µA ± (1.2% + 3 digits)

Overload Protection: Voltage: 600V RMS Current: 2000µA AC Current Measurement




Overload Protection: Voltage: 600V RMS Current: 2000µA Clamp 600A





Frequency: 45 to 400Hz Minimum Current for Frequency Measurement: 400µA or 20A Minimum Current for Clamp Measurement: 0.1A Response: Averaging Resistance Measurement

Range Resolution Accuracy 600Ω ~ 6MΩ 0.1Ω ~ 1kΩ ± (1.0% + 4 digits)

60MΩ 1kΩ ± (2.0% + 4 digits) Overload Protection: 600V RMS Capacitance Measurement




Overload Protection: 600V RMS Sensitivity: 2.5V RMS Duty Cycle Measurement




Continuity Test Overload Protection Open Circuit Voltage Threshold (Appx.)

600V RMS < 0.44V <40Ω Temperature Measurement








Features: Backlit display and worklight, Diode test, Continuity Measures temperature, frequency and capacitance Includes case, thermocouple, test leads, and batteries Calibration: Accurate for one year, CAT Rating: CAT III 600V Accuracy: ± (% of reading + # of least significant digits)


Part Number Dimensions Operating Altitude DescriptionCL200 8.2" x 3.0" x 1.4" 2000m 600A AC Clamp Meter with Temperature, Relative Humidity 75%


Range Resolution Accuracy 400mV 0.1mV

4V 0.001V 40V 0.01V

400V 0.1V

± (0.8% + 2 digits)

600V 1V ± (1.0% + 2 digits) Overload Protection: 600V DC / AC Input Impedance: 10MΩ. AC Voltage Measurement

Range Resolution Accuracy 400mV 0.1mV

4V 0.001V 40V 0.01V

400V 0.1V

± (1.0% + 10 digits)

600V 1V ± (1.2% + 10 digits) Overload Protection: 600V DC / AC Frequency: 40 to 400 Hz Input Impedance: 10MΩ. Response: Averaging AC Current Measurement

Range Resolution Accuracy 4A 0.001A ± (3.5% + 20 digits) 0.5A 4A 0.001A ± (3.0% + 10 digits) > 0.5A 40A 0.01A ± (3.0% + 10 digits)

400A 0.1A ± (2.5% + 10 digits) 600A 1A ± (1.5% + 5 digits)

Overload Protection: 720A for 60 sec. max Frequency: 50 to 60Hz Response: Averaging





Resistance Measurement

Range Resolution Accuracy 400Ω 0.1Ω 4kΩ 0.001kΩ

40kΩ 0.01kΩ 400kΩ 0.1kΩ 4MΩ 0.001MΩ

± (1.2% + 2 digits)

40MΩ 0.01MΩ ± (2.0% + 5 digits) Overload Protection: 600V DC / AC Capacitance Measurement

Range Resolution Accuracy 50nF 0.01nF ± (3.0% + 10 digits) 500nF 0.1nF 5μF 0.001μF

50μF 0.01μF 100μF 0.1μF

± (3.0% + 5 digits)

Overload Protection: 600V DC / AC Frequency Measurement

Range Resolution Accuracy 50Hz 0.01Hz 500Hz 0.1Hz 5kHz 0.001kHz 50kHz 0.01kHz

100kHz 0.1kHz

± (0.1% + 3 digits)

Overload Protection: 600V DC / AC Duty Cycle Measurement

Range Resolution Accuracy 0.1% ~ 99.9% 0.1% ± (3.0% + 0 digits)

Overload Protection: 600V DC / AC Temperature Measurement

Range Resolution Accuracy -4 ~ 1832°F 1°F ± (3.0% + 3 digits)

Overload Protection: 600V DC / AC Diode Test

Overload Protection Resolution Open Circuit Voltage 600V DC / AC 1mV Appx. 1.5V

Continuity Test Overload Protection Resolution Open Circuit Voltage

600V DC / AC 100mΩ Appx. 0.45V




Tools and Test InstrumentsInstruments KleinClamp Meters600A AC/DC TRMS Clamp Meter with Temperature

Features: True RMS, auto-ranging meter measures AC/DC voltage, AC/DC current, resistance, capacitance,

frequency, duty cycle, and temperature, Also tests non-contact voltage, diodes, and continuity Backlit display and worklight, Magnetic mount and lead storage, Non-contact voltage tester Analog bar graph, Temperature, Calibration: Accurate for one year, CAT Rating: CAT IV 600V Accuracy: ± (% of reading + # of least signifi cant digits)


Operating Part Number Overall

Length Altitude Temperature Humidity Description

CL2300 7.65" 2000m 0°C / 32°F to 45°C /113°F

80% max 600A AC/DC TRMS Clamp Meter with Temperature





Overload Protection: 750V RMS Frequency Response: 45 to 400 Hz Minimum Voltage for Frequency Measurement: 200mV Response: True RMS DC Current Measurement


2000µA 1µA ± (1.2% + 3 digits)


Overload Protection: Voltage: 600V RMS Current: 2000µA Clamp 600A AC Current Measurement




Overload Protection: Voltage: 600V RMS Current: 2000µA Clamp 600A




Tools and Test InstrumentsInstruments KleinClamp Meters600A AC/DC TRMS Clamp Meter with Temperature

Frequency: 45 to 400Hz Minimum Current for Frequency Measurement: 400µA or 20A Minimum Current for Clamp Measurement: 0.2A Response: True RMS Resistance Measurement

Range Resolution Accuracy 600Ω ~ 6MΩ 0.1Ω ~ 1kΩ ± (1.0% + 4 digits)

60MΩ 10kΩ ± (2.0% + 4 digits) Overload Protection: 600V RMS Capacitance Measurement



Range Resolution Accuracy 99.99Hz ~ 499.9kHz 0.01Hz ~ 100Hz ± (0.1% + 4 digits)

Overload Protection: 600V RMS Sensitivity 2.5V RMS Duty Cycle Measurement




Continuity Test Overload Protection Open Circuit Voltage

600V RMS < 0.44V Temperature Measurement







Tools and Test InstrumentsInstruments KleinDigital Temperature LoggersDual Input Temperature Logger

Features: Two-input dual differential Digital Temperature Tester offers logging, monitoring and uploading

capabilities to help analyze system performance trends with the included software IP67: Waterproof, dust resistant, Differential T1-T2 Data Logging 9,999, Memory Positions MIN, MAX, Average and Hold functions Backlit display, Probe storage, boot with stand and magnetic strap mount USB Inferface Humidity: Non condensing <50°F, 85% RH: 50° to 86°F, 70% RH: 86° to 104°F, 45% RH: 104°

to 122°F Altitude: Operating - up to 2000 m/Storage - 10000 m Battery: 2 (AAA) type 1.5V Certifications: CE , IEC 1010-1 (2001), EN 61010-1 (2001), No. 1010.1 (1992) IP67 IEC 60529, Immersion (30 min) & Dust proof Overvoltage: (Installation) CATEGORY I Pollution Degree: 2 (IEC 1010-1)


Part Number Batteries Dimensions Operating Temperature DescriptionDTL302 2 x AAA 7.20”h x 3.70”w x 1.70"d 14° to 122°F Dual Input Temperature Logger

Electrical Specifications: J-type -346°F~2192°F -210°C~1200°C 64K ~ 1472K K-Type -328°F~2498°F -200°C~1370°C 74K ~ 1642K T-type -328°F~752°F -200°C~400°C 74K ~ 673K

Temperature Range

E-Type -238°F~1832°F -150°C~1000°C 124K ~ 1273K

0.1°F<1000°F 0.1°C<550°C 0.1K<824K J-type

1°F1000°F 1°C550°C 1K824K 0.1°F<1000°F 0.1°C<750°C 0.1K<1000K

K-Type 1°F1000°F 1°C750°C 1K1000K 0.1°F<752°F 0.1°C<00°C 0.1K<673K T-type

N/A N/A N/A 0.1°F<750°F 0.1°C<400°C 0.1K<673K

Display Resolution

E-Type 1°F750°F 1°C400°C 1K673K

±[0.1% + 1.4 ºF(0.8 ºC)] J, K, E Type <-148 ºF(-100 ºC) add 0.2% of reading

±[0.3% + 2.7ºF(1.5 ºC)] Temperature Accuracy* T Type <-148 ºF(- 100 ºC) add 0.5% of reading

0.01% of reading 0.1 ºF per °F(+0.05°C per °C) for <+64°F (+18 ºC) or +82 ºF (+28 ºC) Temperature Coefficient [Below -148 ºF (-100 ºC): add 0.05% of reading for J, K, and E-type; and 0.1% of

reading for T-type]

Real Time Clock Tolerance About 1 second per day

Max Differential Common Mode Voltage 1V Maximum voltage difference(between any pair of inputs)

Temperature Scale ITS-90 (International Temperature Scale of 1990)

Standards N.I.S.T. Monograph 175 revised to ITS-90

* Accuracy is specified for ambient temperatures between 64°F and 82°F for a period of 1 year. The above specifications do not include thermocouple error.




Tools and Test InstrumentsInstruments KleinDigital Temperature LoggersQuad Input Temperature Logger

Features: Four-input dual differential Digital Temperature Tester offers logging, monitoring and uploading

capabilities, to help analyze system performance trends with the included software IP67: Waterproof, dust resistant, Differential T1-T2 & T3-T4, Data Logging 9,999 Memory Positions MIN, MAX, Average and Hold functions, Backlit display, Probe storage Boot with stand and magnetic strap mount, USB Inferface; software included Humidity: Non condensing <50°F 85% RH: 50° to 86°F, 70% RH: 86° to 104°F, 45% RH: 104° to 122°F Altitude: Operating - up to 2000 m/Storage - 10000 m Battery: 2 (AAA) type 15V Certifcations: CE IEC 1010-1 (2001), EN 61010-1 (2001), No 10101 (1992), IP67 IEC 60529, Immersion (30

min) & Dust proof Overvoltage: (Installation) CATEGORY I Pollution Degree: 2 (IEC 1010-1)


Part Number Batteries Dimensions Operating Temperature DescriptionDTL304 2 x AAA 7.20”h x 3.70”w x 1.70"d 14° to 122°F Quad Input Temperature Logger

Electrical Specifications: J-type -346°F~2192°F -210°C~1200°C 64K ~ 1472K K-Type -328°F~2498°F -200°C~1370°C 74K ~ 1642K T-type -328°F~752°F -200°C~400°C 74K ~ 673K

Temperature Range

E-Type -238°F~1832°F -150°C~1000°C 124K ~ 1273K

0.1°F<1000°F 0.1°C<550°C 0.1K<824K J-type

1°F1000°F 1°C550°C 1K824K 0.1°F<1000°F 0.1°C<750°C 0.1K<1000K

K-Type 1°F1000°F 1°C750°C 1K1000K 0.1°F<752°F 0.1°C<00°C 0.1K<673K T-type

N/A N/A N/A 0.1°F<750°F 0.1°C<400°C 0.1K<673K

Display Resolution

E-Type 1°F750°F 1°C400°C 1K673K

±[0.1% + 1.4 ºF(0.8 ºC)] J, K, E Type <-148 ºF(-100 ºC) add 0.2% of reading

±[0.3% + 2.7ºF(1.5 ºC)] Temperature Accuracy* T Type <-148 ºF(- 100 ºC) add 0.5% of reading

0.01% of reading 0.1 ºF per °F(+0.05°C per °C) for <+64°F (+18 ºC) or +82 ºF (+28 ºC) Temperature Coefficient [Below -148 ºF (-100 ºC): add 0.05% of reading for J, K, and E-type; and 0.1% of

reading for T-type]

Real Time Clock Tolerance About 1 second per day

Max Differential Common Mode Voltage 1V Maximum voltage difference(between any pair of inputs)

Temperature Scale ITS-90 (International Temperature Scale of 1990)

Standards N.I.S.T. Monograph 175 revised to ITS-90

* Accuracy is specified for ambient temperatures between 64°F and 82°F for a period of 1 year. The above specifications do not include thermocouple error.




Tools and Test InstrumentsInstruments KleinInfrared Thermometers30:1 Dual Laser Infrared Thermometer

Features: Professional series infrared thermometer features a wide measurement range, tight distance to spot

ratio, K-type thermocouple input, dual lasers, and several calculation modes to assist in making the best possible measurements

Dual lasers allow to see the actual target diameter, Measurement range: -76° to 1400°F Backlit display; worklight, Includes Klein case, batteries (2 x AAA), thermocouple, and protective

boot Battery Type: 2 x AAA alkaline batteries, Battery Life: 180 hours typical; 140 hours minimum with

continuous. Use, Calibration: Accurate for one year, Laser: FDA and IEC Class II, Max Output: Less than 1mW

Wavelength: 635~660nm, Compliance: 21 CFR, Chapter 1, Subchapter J, Certifications: CE and RoHS


OperatingPart Number Batteries Altitude Temperature D:S Ratio DescriptionIR3000 2 x AAA 3000m 32~122°F 30:1 30:1 Dual Laser Infrared Thermometer

MultimetersAuto Ranging Multimeter

Features: Auto ranging voltage, Backlit display, Measures AC/DC Voltage - 600V Measures AC/DC Current- 10A, Measures capacitance, temperature and frequency Calibration: Accurate for one year, Cat Rating: CAT III 600V Listing: ETL & cETL standard UL 3111-1 listed, Pollution degree: 2


OperatingPart Number Altitude Temperature DescriptionMM200 2000m 0°C / 32°F to 40°C / 104°F < 75% R.H. Auto Ranging Multimeter




Tools and Test InstrumentsInstruments KleinMultimetersAuto Ranging Multimeter



Overload Protection: 600V RMS Input Impedance: > 10MΩ. AC Voltage Measurement

Range Resolution Accuracy 4V ~ 600V 1mV ~ 1V ± (1.2% + 5 digits)

Overload Protection: 600V RMS Frequency: 50 ~ 60Hz Input Impedance: > 10MΩ Response: Averaging AC/DC Current Measurement

Range Resolution DC Accuracy AC Accuracy

400μA ~ 400mA 0.1μA ~ 0.1mA

± (1.0% + 3 d) ± (1.2% + 3 d)

10A 0.01A ± (3.0% + 5 d) ± (3.0% + 5 d) Overload Protection: ma Input: F400mA / 250V fuse 10a Input: F10A / 500V fuse Max Input Current: ma Input: 400mA DC / AC RMS 10a Input: 10A DC / AC RMS Resistance Measurement

Range Resolution Accuracy 400Ω ~ 4MΩ 0.1Ω ~ 0.001MΩ ± (0.8% + 4 digits)

40MΩ 0.01MΩ ± (1.5% + 4 digits) Overload Protection: 600V RMS Capacitance Measurement

Range Resolution Accuracy 4nF ~ 40μF 0.001nF ~ 0.01μF ± (3.0% + 6 digits)

200μF 0.1μF ± (4.0% + 6 digits) Overload Protection: 600V RMS 4nF Range: Stated accuracy with film capacitor or better. Frequency Measurement


Overload Protection: 600V RMS Sensitivity: 0.7V RMS at 1MHz Temperature Measurement

Range Resolution Accuracy -4°F ~ 32°F 1°F ± (5.0% + 2 digits)

32°F ~ 1832°F 1°F ± (3.0% + 2 digits) Overload Protection: 600V RMS Sensor: K-type thermocouple, accuracy not listed Duty Cycle Measurement

Range Resolution Accuracy 0.1% ~ 99.9% 0.1% ± (2% + 5 digits)

Overload Protection: 600V RMS Frequency: 0.5Hz ~ 100kHz (pulsewidth > 2μsec)




Tools and Test InstrumentsInstruments KleinMultimetersElectricians/HVAC Multimeter

Features: Measures: AC/DC Voltage - 1000V AC/DC Current - 10A Measures resistance, capacitance, frequency, duty cycle, and temperature Also tests diodes and continuity Auto-ranging voltage measurement Backlit display; analog bar graph Includes Klein case, thermocouple, test leads and battery Calibration: Accurate for one year CAT Rating: CAT III 1000V, CAT IV 600V Accuracy: ± (% of reading + # of least signifi cant digits)


Operating Part Number Altitude Temperature DescriptionMM1300 2000m 0°C/32°F to 50°C/122°F Electrician’s/HVAC Multimeter

Diode Test Overload Protection Range Test Current Open Circuit Voltage

600V RMS 6.0V Appx. 0.25mA < 1.8V DC (typ.) Continuity Test

Overload Protection Open Circuit Voltage Threshold (Appx.) 600V RMS < 0.44V <40Ω

Temperature Measurement Range Resolution Accuracy

-58 ~ 600°F 0.1°F ± (1.0% + 5.4°F) -50 ~ 600°C 0.1°C ± (1.0% + 3.0°C)

600 ~ 1832°F 1°F ± (1.0% + 5.4°F) -600 ~ 1000°C 1°C ± (1.0% + 3.0°C)

Overload Protection: 600V RMS Thermocouple Accuracy: Not specified

Electricians/HVAC TRMS MultimeterFeatures: Measures AC/DC Voltage - 1000V Measures AC/DC Current - 10A Measures low impedance voltage, resistance, capacitance, frequency, duty cycle and temperature Can also test diodes and continuity True RMS measurements Low Impedance Backlit display,Analog bar graph Includes Klein case, thermocouple, test leads and batteries Calibration: Accurate for one year CAT Rating: CAT III 1000V, CAT IV 600V


Operating Part Number Overall Length Altitude Temperature DescriptionMM2300 7" 2000m 0°C/32°F to 50°C/122°F Electrician’s/HVAC TRMS Multimeter




Tools and Test InstrumentsInstruments KleinMultimetersElectricians/HVAC TRMS Multimeter



1000V 1V ± (0.8% + 10 digits) Overload Protection: 1000V Input Impedance (Nominal): 10MΩ, <100pF Input Impedance (Low Z): 3kΩ, <200pF, up to 600V RMS AC Voltage Measurement

Range Resolution Accuracy 40Hz ~ 400Hz

Accuracy 400Hz ~ 5kHz

600V 0.1mV ± (2.0% +3 digits) 6V ~ 600V 1mV ~ 0.1V

± (0.75% + 5 digits) ± (2.0% +3 digits)

1000V 1V ± (0.75% + 8 digits) ± (2.0% +3 digits)* Overload Protection: 1000V RMS Frequency Response: 40 to 5kHz Input Impedance: 10MΩ, <100pF Response: True RMS Input Impedance (Low Z): 3kΩ, <200pF, up to 600V RMS *Accuracy for 400Hz ~ 1kHz range only. DC Current Measurement

Range Resolution Accuracy 600µA ~ 400mA 0.1µA ~ 0.1mA ± (1.0% + 5 digits)

6A ~ 10A 1mA ~ 10mA ± (1.5% + 5 digits) Overload Protection: µAmA: F440mA/1000V fuse / A Input: F11A/1000V fuse AC Current Measurement


600µA ~ 400mA 0.1µA ~ 0.1mA ± (1.2% + 5 digits) 6A ~ 10A 1mA ~ 10mA ± (1.8% + 5 digits)

Overload Protection: µAmA: F440mA/1000V fuse / A Input: F11A / 1000V fuse Frequency: 40 to 2kHz Response: True RMS Resistance Measurement

Range Resolution Accuracy 600Ω ~ 6MΩ 0.1Ω ~ 0.001MΩ ± (1.0% + 5 digits)

60MΩ 0.01MΩ ± (1.5% + 10 digits) Overload Protection: 600V RMS Capacitance Measurement

Range Resolution Accuracy 60nF 0.01nF

600nF ~ 6000µF 0.1nF ~ 1µF ± (3.5% + 6 digits)



Overload Protection: 600V RMS Sensor: >0.7V RMS Duty Cycle Measurement


Overload Protection: 600V RMS Sensitivity: < 50V Frequency: <10kHz Diode Test


Continuity Test Overload Protection Open Circuit Voltage Threshold (Appx.)

600V RMS < 0.44V <40Ω




Tools and Test InstrumentsInstruments KleinMultimetersElectricians/HVAC TRMS Multimeter

Temperature Measurement

Range Resolution Accuracy -58 ~ 600°F 0.1°F ± (1.0% + 5.4°F) -50 ~ 600°C 0.1°C ± (1.0% + 3.0°C)

600 ~ 1832°F 1°F ± (1.0% + 5.4°F) -600 ~ 1000°C 1°C ± (1.0% + 3.0°C)

Overload Protection: 600V RMS, Thermocouple Accuracy: Not specified

Testers - Circuit TesterDigital Circuit Breaker Finder

Features: Quickly, accurately, and automatically find the corresponding circuit breaker of any 120V standard

outlet, Flashing arrow indicator for easy identification Strong transmitter reaches distances up to 1,000 feet 90 - 120V operation, Microprocessor controlled for more reliable identification Auto power-off feature saves battery life Auto Power Off: Approximately 4 minutes, Safety Rating: UL listed Sensitivity: Indication at 4mm distance from a wire carrying 120 V AC

[


OperatingPart Number Overall Length Altitude Voltage Frequency

TemperatureDescription

ET300 6" < 2000m 90 ~ 120V AC 50 ~ 60Hz 0°C to 40°C Digital Circuit Breaker Finder

MilwaukeeCasesLarge Meter Case

Features: Case constructed of rugged nylon,Three sided zipper closure One inside pocket for a manual and one main compartment for a meter Strong nylon strap with snap closure for hanging from belt All the following Milwaukee meters fit in this Soft Meter Case: 2205-20 Fork Meter, 2206-20 Fork Meter for HVAC/R 2207-20 M12 Fork Meter, 2216-20 Digital Multimeter 2217-20 Digital Multimeter, 2235-20 400 Amp Clamp Meter 2236-20 Clamp Meter for HVAC/R, 2237-20 Clamp Meter 2265-20 Laser TEMP-GUN, 2266-20 Laser TEMP-GUN


Part Number Description48550180 Large Meter Case, Constructed of Rugged Nylon




Tools and Test InstrumentsInstruments MilwaukeeCasesMeter Case

Features: Case constructed of rugged nylon Three sided zipper closure One inside pocket for a manual and one main compartment for a meter Strong nylon strap with snap closure for hanging from belt All the following Milwaukee meters fit in this Soft Meter Case: 2205-20 Fork Meter, 2206-20 Fork Meter for HVAC/R 2216-20 Digital Multimeter, 2217-20 Digital Multimeter 2235-20 400amp Clamp Meter, 2265-20 Laser TEMP-GUN 2266-20 Laser TEMP-GUN


Part Number Description48550175 Meter Case, Constructed of Rugged Nylon

Roll Up Accessory CaseFeatures: Case constructed of rugged nylon,Secure Velcro closure Four inside clear pockets make it easy to see your accessories Strong nylon strap is used for hanging All Milwaukee Test & Measurement accessories can fit in the pockets


Part Number Description48550165 Roll Up Accessory Case, Constructed of Rugged Nylon

Zippered Accessory CaseFeatures: Case constructed of rugged nylon, Three sided zipper closure One inside pocket and one main compartment make it easy to find your accessories Strong nylon strap is used for hanging All Milwaukee Test & Measurement accessories can fit in the pockets


Part Number Description48550170 Zippered Accessory Case, Constructed of Rugged Nylon




Tools and Test InstrumentsInstruments MilwaukeeClamp Meters400 Amp Clamp Meter

Features: Dial Switch Type Display Backlight TRMS Hold Rugged over-molding LED Work Light Includes: (1) 400 Amp Clamp Meter (NIST) Kit (2235-20NST) (1) Electrical Test Lead Set (2) AAA Batteries (1) NIST Certificate of Calibration with Data (1) Manual


TypePart Number Length Jaw Size Battery Display Continuity Current AC Description223520 7" 1" Alkaline (AAA) Standard LCD Audible 400A 400 Amp Clamp Meter Kit223520NST 7" 1" Alkaline (AAA) Standard LCD Audible 400A 400 Amp Clamp Meter Kit, NIST Certificate

Clamp Meter For HVAC/RFeatures: Measures up to 600 amps AC, Large 1.30” jaw opening Thin Jaw Profile for easier wire measurement in panels or in bundles Wide Voltage range to 600 AC/DC volts True-RMS for accurate measurement in all applications Built-In Voltage Detector and LED Work Light Thermocouple (dual banana) input for contact temperature measurement 600 uA DC for Flame Rectification High Contrast, White on Black Display with Backlight for easy reading Rugged over-molding increases durability and user grip Dial Switch Type, Non-Contact Voltage Display Backlight, Hold Includes: (1) Clamp Meter for HVAC/R (2236-20), (1) Electrical Test Lead Set (1) Dual Banana Thermocouple, (2) AA Batteries (1) Manual


TypePart Number Length Jaw Size Battery Display Description223620 9-1/2" 1.3" Alkaline (AA) White on Black LCD Clamp Meter for HVAC/R, Measures up to 600 amps AC223620NST 9-1/2" 1.3" Alkaline (AA) White on Black LCD Clamp Meter for HVAC/R, Measures up to 600 amps AC,

NIST Certificate




Tools and Test InstrumentsInstruments MilwaukeeClamp MetersModel-2237-20

Features: Dial Switch Type Display Backlight TRMS Hold Rugged over-molding LED Work Light Non-Contact Voltage Includes: (1) Clamp Meter (2237-20) (1) Test Lead Set (2) AA Batteries (1) Manual


TypePart Number Jaw Size Battery Display Frequency Description223720 1.3" Alkaline (AA) White on Black LCD 10 kHz Clamp Meter223720NST 1.3" Alkaline (AA) White on Black LCD 10 kHz Clamp Meter, NIST Certificate

ClipsElectrical Alligator Clips

Milwaukee’s Industrial Test Probes attach to 49-77-1003 Industrial Connecting Test Leads. Designed to withstand up to 1000 volts and 10 amps, this set of alligator clips used along with 49-77-1003 Industrial Connecting Test Leads and 49-77-1004 Industrial Test Probes are ideal for measuring voltage, current and resistance of most electrical systems. Covered by 2 year warranty. Nothing but HEAVY DUTY Features: Universal Alligator Clips attach to all connecting test leads with banana lead ends UL approved for improved safety Constructed with rugged Rubber overmolding Includes: (1) Black Industrial Alligator Clip (1) Red Industrial Alligator Clip


Part Number Description49771005 Universal Alligator Clips Attach to all Connecting Test Leads with Banana Lead Ends




Tools and Test InstrumentsInstruments MilwaukeeCombo KitElectrical Combo Kit

Includes: (1) Digital Multimeter (2217-20) (1) Voltage Detector with LED (2202-20) (1) FASTBACK Flip Utility Knife (48-22-1901) (1) 11 IN 1 Screwdriver w/ Square Driver (48-22-2114) (1) Meter Case (48-55-0175) (1) Magnetic Meter Holder (49-77-3001) (1) Electrical Test Lead Set (2) AA Batteries (2) AAA Batteries


Part Number Description222020 Electrical Combo Kit

Cordless - Drill/DriverM18 1/4" Hex Compact Impact Driver

Features: Milwaukee 4-Pole Frameless Motor: Features a robust design combined with rare-earth magnets

for longer life, more power and more runtime than any brushed competitor Milwaukee engineered Impact Mechanism: Delivers maximum application speed for greater efficiency

on the job REDLITHIUM Battery Technology: Superior pack construction, electronics, and performance deliver

more work per charge and more work over pack life than any battery on the market REDLINK Intelligence: Provides optimized performance and overload protection using total system

communication between tool, battery and charger Includes: (1) M18 1/4" Hex Compact Impact Driver (2650-20) (2) M18 Compact REDLITHIUM Battery (48-11-1815) (1) M18 Lithium-Ion Battery Charger (48-59-1801) (1) Carrying Case


Part Number Length No Load Ipm No Load Speed Peak Torque Description265021 5-3/4" 0-3,200 0-2,200 RPM 1400 in-lbs M18 1/4" Hex Compact Impact Driver




Tools and Test InstrumentsInstruments MilwaukeeCordless - Drill/DriverM18 Lithium-Ion, 1/2" Compact

Features: Milwaukee 4-Pole Frameless Motor: Features a robust design combined with rare-earth magnets for

longer life, best-in-class 425 in-lbs of torque and 0-500/0-1,500 RPM REDLITHIUM Battery Technology: Superior pack construction, electronics, and performance deliver

more work per charge and more work over pack life than any battery on the market Single Sleeve Ratcheting Chuck: All-metal 1/2” chuck optimizes grip strength and reduces slippage Built-in LED light: Illuminates surfaces for faster, more efficient work Includes: (1) M18 Cordless Lithium-Ion 1/2" Compact Drill/Driver (2601-20) (2) M18 Compact REDLITHIUM Battery (48-11-1815) (1) M18 Lithium-Ion Battery Charger (48-59-1801) (1) Carrying Case


Part Number Length Chuck Type Description260122 7.75" 1/2" Metal Single Sleeve - Ratcheting Lock 1/2" M18 Cordless Lithium-Ion Compact Drill/Driver Kit

Cordless ToolsM-Spector Digital Inspection Camera

Features: The digital camera technology delivers a higher resolution and clear picture quality The exclusive adjustable digital zoom of up to 200% allows to get precise picture focus for quick

assessment of problems The 2.4" high-resolution 320 by 240 pixel color LCD display delivers a clear view of targets and

objects The 3X LED brightness control with digital glare reduction allows for optimal lighting control with

wash-out prevention The ergonomic "In-Line" handle with "Up-Front" image controls make comfortable, 1-hand operation

easy from any angle The exclusive power-saving auto shut-off feature helps maximize the run-time and reduces down-

time The durable 3 foot long camera cable is waterproof and fully expandable up to 9 feet with optional

extensions for extended reach in wet environments The small camera cable and head design easily fits into holes as small as 3/4" allowing access into

areas impossible to see in before Uses four AA batteries as a power supply Includes: (1) 12v M-Spector Inspection Camera (1) 3’ Camera Cable (1) AA Battery Adapter Pack (4) AA Batteries Pack (1) Molded Plastic Carrying Case

Applications: Pipe/Drain/Pump/Valve inspection HVAC equipment inspection Electrical/Wiring inspection Leak detection Equipment inspection/diagnosis Weld inspection


BatteryPart Number Cable Length Life Type Description230020 3 Feet (Expandable up to 9 Feet) 6 Hours AA x 4 M-Spector Digital Inspection Camera




Tools and Test InstrumentsInstruments MilwaukeeDigital MultimetersModel-2216-20

Features: True-RMS for accurate measurement in all applications Wide Voltage range to 600 AC /DC volts, Resistance range from 600 ohm to 40 Mohm Auto Range to Mv, Frequency measurements from 10Hz to 50kHz Current Measurement to 10A AC/DC Rugged over-molding increases durability and user grip Dial Switch Type Calibration Needed Recommend calibration service once every year Backlight and Standard LCD Display HOLD/MIN/MAX, Bar graph Magnetic Meter Holderm, Recommend calibration service once every year Includes: (1) Digital Multimeter (2216-20), (1) Electrical Test Lead Set, (1) Manual (2) AA Batteries


Part Number Length Capacitance CurrentAC/DC

Frequency Description

221620 6-1/2" 1,000μF 10.00A 2.00 Hz - 50.00 kHz Digital Multimeter, Wide Voltage Range to 600 AC /DCVolts, Frequency: 2.00 Hz - 50.00 kHz

221620NST 6-1/2" 1,000μF 10.00A 2.00 Hz - 50.00 kHz Digital Multimeter, Wide Voltage Range to 600 AC /DCVolts, Frequency: 2.00 Hz - 50.00 kHz, NIST Certificate

Model-2217-20Features: Wide Voltage range to 600 volts AC/DC, Auto Range to millivolts True-RMS for accurate measurement in all applications Lo-Z measurement to eliminate ghost voltage Frequency measurements from 10Hz to 50kHz Contact temperature measurement from -40 to 752°F Current Measurement to 10 amps AC/DC High Contrast, White on Black Display with Backlight for easy reading Rugged over-molding increases durability and user grip Bargraph, HOLD/MIN/MAX, Magnetic Meter Holder Recommend calibration service once every year, Dial Switch Type, Backlight Includes: (1) Digital Multimeter (2217-20), (1) Electrical Test Lead Set, (1) Dual Banana Thermocouple (1) Manual (2) AA Batteries


Part Number Length Capacitance CurrentAC/DC


221720 6-1/2" 1,000μF 10.00A 10 Hz - 50.00 kHz Digital Multimeter, Wide Voltage Range to 600 AC /DCVolts, Frequency: 10 Hz - 50.00 kHz

221720NST 6-1/2" 1,000μF 10.00A 10 Hz - 50.00 kHz Digital Multimeter, Wide Voltage Range to 600 AC /DCVolts, Frequency: 10 Hz - 50.00 kHz, NIST Certificate




Tools and Test InstrumentsInstruments MilwaukeeFork MeterModel-2205

Features: Measures up to 200 amps, Wide 0.63” jaw opening Wide Voltage range to 1000 volts AC /DC True-RMS for accurate measurement in all applications Lo-Z measurement to eliminate ghost voltage Built-In Voltage Detector and LED Work Light High Contrast, White on Black Display with Backlight for easy reading Rugged over-molding increases durability and user grip CAT IV 600V / CAT III 1000V for greater safety Non-Contact Voltage Dial switch type Includes: (1) Fork Meter (2205-20), (1) Test Lead Set, (1) Manual (2) AA Batteries


TypePart Number Length Battery Display Current AC Description220520 8" Alkaline (AAA) White on Black LCD 200A Fork Meter Measures up to 200 amps, Wide 0.63” Jaw

Opening220520NST 8" Alkaline (AAA) White on Black LCD 200A Fork Meter Measures up to 200 amps, Wide 0.63” Jaw

Opening, NIST Certificate

Model-2206Features: Measures up to 200 amps, Wide 0.63” jaw opening Wide Voltage range to 1000 volts AC /DC True-RMS for accurate measurement in all applications Built-In Voltage Detector and LED Work Light Thermocouple (dual banana) input for contact temperature measurement 600 uA DC for Flame Rectification High Contrast, White on Black Display with Backlight for easy reading Rugged over-molding increases durability and user grip Dial Switch Type Non Contact Voltage Includes: (1) Fork Meter for HVAC/R (2206-20), (1) Test Lead Set, (1) Dual Banana Thermocouple , (1) Manual (2) AA Batteries


TypePart Number Length Battery Display Current AC Description220620 8" Alkaline (AA) White on Black LCD 200A Fork Meter Measures up to 200 amps, Wide 0.63” Jaw

Opening for HVAC/R220620NST 8" Alkaline (AA) White on Black LCD 200A Fork Meter Measures up to 200 amps, Wide 0.63” Jaw

Opening for HVAC/R, NIST Certificate




Tools and Test InstrumentsInstruments MilwaukeeLaser Temp-GunModel-2265-20

Features: Surface Temperature Measurement from -22 to 662°F (-30 to 350°C) 10:1 Distance to Spot Ratio. Measures a one foot spot from 10 feet away. User Configurable Hi/Low Alarm Settings High Contrast, White on Black Display with Backlight for easy reading Rugged over-molding increases durability and user grip Hold, Max Value Functions, 0.1°F display resolution 1.5% accuracy, 0.95 fixed emissivity Trigger Switch Type, Display Backlight Includes: (1) Laser Temp-Gun (2265-20), (1) Manual (3) AA Batteries


TypePart Number Length Battery Display Emissivity Description226520 6-1/2" Alkaline (AA) Standard LCD 0.95 Laser Temp-Gun, Surface Temperature Measurement from -22

to 662°F226520NST 6-1/2" Alkaline (AA) Standard LCD 0.95 Laser Temp-Gun, Surface Temperature Measurement from -22

to 662°F, NIST Certificate

Model-2266-20Features: Surface Temperature Measurement from -20 to 932° F (-30 to 500° C) 12:1 Distance to Spot Ratio. Measures a one foot spot from 12 feet away. User Configurable Hi/Low Alarm Settings K-type thermocouple input for contact temperature High Contrast, White on Black Display with Backlight for easy reading Rugged over-molding increases durability and user grip Hold, Max Value Functions Slide rail for mounting 2201 Voltage Detector with Work Light 0.95 fixed emissivity Trigger Switch Type Display Backlight Includes: (1) Laser Temp-Gun (NIST) (2266-20), (1) NIST Certificate of Calibration with Data, (1) Manual (3) AA Batteries


TypePart Number Length Battery Display Emissivity Description226620 6-1/2" Alkaline (AA) White on Black LCD 0.95 Laser Temp-Gun, Surface Temperature Measurement from

-20 to 932°F226620NST 6-1/2" Alkaline (AA) White on Black LCD 0.95 Laser Temp-Gun, Surface Temperature Measurement from

-20 to 932°F, NIST Certificate




Tools and Test InstrumentsInstruments MilwaukeeMeter HolderMagnetic Meter Holder

Features: Strong magnet hold meter in place Allows hands free operation


Part Number Description49773001 Magnetic Meter Holder

Meter KitLaser Distance Meter Kit

Features: Measures up to 200' within 1/16" Design allows for easy measuring from edges and corners Area and volume measurement plus memory storage of last 10 readings Easy to read display with backlight Six different measurement functions Rugged over-molding Easily add and subtract distance values Includes: (1) Laser Distance Meter Kit (2280-20) (2) AAA Batteries (1) Carrying Case (1) Manual


Part Number Basic Accuracy Display Type Distance Range Description228020 0.05" Standard LCD 0.05" to 200" Laser Distance Meter Kit, Measures up to 200’ Within

1/16"

Test Leads and ProbesElectrical Test Lead Set

Milwaukee's E lectr ical Test Lead Set works on all digital multimeters, clamp meters and fork meters.Designed to measure up to 1000 volts and 10 amps, this electrical test lead set is ideal for measuring voltage, current and resistance of most electrical and HVAC/R systems Includes: (1) Black Test Lead (1) Red Test Lead


Part Number Description49771001 Electrical Test Lead Set Works on all Digital Multimeters, Clamp Meters and Fork Meters




Tools and Test InstrumentsInstruments MilwaukeeTest Leads and ProbesElectrical Test Leads

Milwaukee’s Industrial Connecting Test Leads attach to all digital multimeters, clamp meters and fork meters. Designed to withstand up to 1000 vol ts and 10 amps, this set of connecting test leads used along with 49-77-1004 Industrial Test Probes and 49-77-1005 Industrial Alligator Clips are ideal for measuring voltage, current and resistance of most electrical systems. Covered by 2 year warranty.Nothing but HEAVY DUTY Features: Universal Connecting Test Leads plug into all digital multimeters, clamp meters, and fork meters UL approved for improved safety Constructed with flexible PVC insulation Includes: (1) M-Spector AV 3' Extension Cable (48-53-0141)


Part Number Description49771003 Industrial Connecting Test Leads Attach to all Digital Multimeters, Clamp Meters and Fork Meters

Electrical Test ProbesMilwaukee’s Industrial Test Probes attach to 49-77-1003 Industrial Connecting Test Leads. Designedto withstand up to 1000 volts and 10 amps, this set of test probes used along with 49-77-1003 Industrial Connecting Test Leads and 49-77-1005 Industrial Alligator Clips are ideal for measuring voltage, current and resistance of most electrical systems. Covered by 2 year warranty. Nothing but HEAVY DUTY Features: Universal Test Probes attach to all Connecting Test Leads UL approved for improved safety Constructed of Stainless Steel Constructed with rugged Rubber overmolding Includes: (1) Black Industrial Test Probe (1) Red Industrial Test Probe


Part Number Description49771004 Universal Test Probes Attach to all Connecting Test Leads




Tools and Test InstrumentsInstruments MilwaukeeTester KitFluorescent Lighting Tester Kit

Features: Test Lamps, Ballast and Pins: Complete 3-in-1 solution 2.5’ Fully retractable antenna for extended reach when testing Non-conductive antenna sleeve allows for safe testing Removable antenna adapter improves lamp test response Visual and audible tool feedback to easily confirm testing Built-in LED flashlight illuminates dark work spaces Dial and buttons positioned for one-handed use Rugged over-molding for increased grip and durabil ity Durable tool that continues to work after a 6.5 foot drop Fully retractable inside tool Antenna Storage Antenna Adapter increases LAMP Test response Two Meter Drop Test After 20 minutes, the tester will turn off Replaceable Antenna by Milwaukee Service and Repair Team Includes: (1) Fluorescent Lighting Tester Kit (2210-20) (4) AA Batteries (1) Antenna Adapter


BatteryPart Number Life Type Lamp Test Operating Temperature °F (°C) Description221020 35 Hours Alkaline (AA) T5, T8, T12 14 (-10) - 122 (50) Fluorescent Lighting Tester Kit

ThermocouplesDual Banana Thermocouple

Milwaukee's Dual Banana Thermocouple measures temperatures from -40 to 500° F. It is ideal for the contact measurement of HVAC/R, plumbing and electrica l systems. Can be used on any meter that has test lead input jacks and can measure contact temperature Features: Replacement for any dual banana thermocouple For contact temperature measurement Teflon insulated wire


Part Number Temperature Range Description49772001 -40 to 500° F Dual Banana Thermocouple, Measures Temperatures from -40 to 500° F




Tools and Test InstrumentsInstruments MilwaukeeThermocouplesK-Type Thermocouple

Milwaukee's K-type Thermocouple measures temperatures from -40 to 500° F. It is ideal for the contact measurement of HVAC/R, plumbing and electrica l systems. Can be used on any temperature meter with K-type inputs Features: Replacement for any k-type thermocouple For contact temperature measurement Teflon insulated wire


Part Number Temperature Range Description49772002 -40 to 500° F K-Type Thermocouple, Measures Temperatures from -40 to 500° F

Voltage DetectorVoltage Detector with LED

Features: Extra bright LED work light makes working in dark areas easier than ever CAT IV 1000V safety rating is safe for all applications including industrial applications Green Power On indicator light tells you the voltage detector is working properly before use Easy to use rear push button design, On/Off Button Pocket clip allows for easy storage and retrieval from pocket Industry leading non-contact voltage detection technology Powered by two easy to replace AAA batteries Audible Indicator, Green & quot; On & quot; Indicator


Part Number Length Battery Type Description220220 6" Alkaline (AAA) Wide 50 - 1000 AC Voltage Range Detector with LED

Voltage Detector with Work LightFeatures: It runs off an easy-to replace AAA battery platform and doubles as a mini-flashlight At 3.5 inches long and with an easy to use rear button, this is the perfect tool for every electrician It provides a wide range of 90-600 VAC for detecting voltage in wire, outlets, and cable In addition, the unit will slide onto and attach to the mainframe of the Milwaukee Laser Temp-Gun

and Digital Multimeter to increase their performance and usability


Part Number Length Battery Type Description220120 3.5" Alkaline (AAA) Wide 90 - 600 VAC Voltage Range Detector with Work Light




Tools and Test InstrumentsInstruments MilwaukeeVoltage DetectorVoltage Range Detector

Features: Wide 50 - 1000 AC voltage range, CAT IV 1000V for highest safety rating Tip for checking outlets, Green light indicates tool is on Loud beeper indicates voltage, Blinking red light indicates voltage On/Off button, Pocket clip for easy storage, Green & quot; On & quot; Indicator, Audible Indicator Includes: (1) Voltage Detector with LED (2202-20), (1) LED, (2) AAA Batteries


Part Number Battery Type Length Description220020 Alkaline (AAA) 6" Wide 50 - 1000 AC Voltage Range Detector

PowerMilwaukeeCordless - Band SawM12 Cordless Sub-Compact Band Saw - Model-2429-20

Features: One-Handed Cuts: Most compact size and lightest weight of any cordless band saw Powerful Motor: Cuts 3/4" EMT in 3 seconds, up to 150 cuts per charge with the XC battery 1-5/8" Cut Capacity: For a wide range of applications, LED Light: Highlights the cut line Meets OSHA Guarding Requirements: Suitable for One-Handed use Blade Tension Adjustment: Adjustable blade tracking Includes: (1) M12 Cordless Sub-Compact Band Saw (2429-20) (1) 18 TPI Sub-Compact Portable Band Saw Blade (3) Pack (48-39-0572)


Part Number Length Description242920 11" M12 Cordless Sub-Compact Band Saw




Tools and Test InstrumentsPowerMilwaukeeCordless - Band SawM12 Cordless Sub-Compact Band Saw Kit - Model-2429-21XC

Features: One-Handed Cuts: Most compact size and lightest weight of any cordless band saw Powerful Motor: Cuts 3/4" EMT in 3 seconds, up to 150 cuts per charge with the XC battery 1-5/8" Cut Capacity: For a wide range of applications Meets OSHA Guarding Requirements: Suitable for One-Handed use LED Light: Highlights the cut line Blade Tension Adjustment: Adjustable blade tracking Includes: (1) M12 Cordless Sub-Compact Band Saw (2429-20) (1) M12 XC High Capacity REDLITHIUM Battery (48-11-2402) (1) 18 TPI Sub-Compact Portable Band Saw Blade (3) Pack (48-39-0572) (1) M12 Lithium-ion Battery Charger (48-59-2401) (1) Carrying Case


Part Number Length Description242921XC 11" M12 Cordless Sub-Compact Band Saw Kit

Cordless - Drill/Driver3/8 Hammer Drill Kit with 2 Bat

Features: Powerful Motor: Delivers best in class 275 in-lbs of torque Compact & Lightweight: 7-5/8" length, 2.8 lbs 2-Speed Metal Gear Box: 0-22,500 BPM, 0-400 / 0-1,500 RPM 3/8" Metal Single Sleeve Ratcheting Chuck: Maximum Durability, Grip, and Bit Retention On-Board Fuel Gauge: Displays Remaining Run-Time Built-In LED Light: Illuminates Work Surface Includes: M12 Cordless LITHIUM-ION 3/8" Hammer Drill Driver 2411 (2) M12 RED LITHIUM Batteries 30-Minute Charger Carrying Case


TypePart Number Length RPM Battery Chuck Description241122 7-5/8" 0-400 / 0-1,500 RPM (2) M12 RED LITHIUM Batteries 3/8" Single Sleeve Cordless Hammer Drill/Drivers 12v 3/8




Tools and Test InstrumentsPowerMilwaukeeCordless - Drill/DriverM12 Lithium-Ion 3/8” Right Angle Drill/Driver Kit - Model-2415-21

Features: REDLITHIUM Battery Technology: Superior pack construction, electronics, and performance deliver

more work per charge and more work over pack life than any battery on the market Extended Paddle Switch: Provides convenience and comfort no matter what the job requires Innovative Electronic Clutch: Delivers up to 100 in-lbs of torque with 11 settings plus drill mode for

complete control in fastening applications 3/8” Single Sleeve Ratcheting Chuck: Allows quick and easy bit changes and maximum grip Built-in LEDs: Illuminate work surface and indicate clutch position Includes: (1) M12 Cordless Lithium-Ion 3/8” Right Angle Drill/Driver (2415-20) (1) M12 REDLITHIUM Battery (48-11-2401) (1) M12 Lithium-ion Battery Charger (48-59-2401) (1) Carrying Case


Part Number Chuck Type Peak Torque Description241521 3/8" Single Sleeve 100 in-lbs M12 Cordless Lithium-Ion 3/8” Right Angle Drill/Driver Kit

M12 Lithium-Ion 3/8” Right Angle Drill/Driver - Model-2415-20Features: REDLITHIUM Battery Technology: Superior pack construction, electronics, and performance

deliver more work per charge and more work over pack life than any battery on the market Extended Paddle Switch: Provides convenience and comfort no matter what the job requires

Innovative Electronic Clutch: Delivers up to 100 in-lbs of torque with 11 settings plus drill mode for complete control in fastening applications

3/8” Single Sleeve Ratcheting Chuck: Allows quick and easy bit changes and maximum grip Built-in LEDs: Illuminate work surface and indicate clutch position Variable-speed Trigger: Provides maximum control Includes: (1) M12 Cordless Lithium-Ion 3/8” Right Angle Drill/Driver (2415-20)


Part Number Chuck Type Peak Torque Description241520 3/8" Single Sleeve 100 in-lbs M12 Cordless Lithium-Ion 3/8” Right Angle Drill/Driver




Tools and Test InstrumentsPowerMilwaukeeCordless - Multi-ToolM12 Lithium-Ion Multi-Tool - Model-2426-20

Features: Application Versatility: Cuts, Grinds, Sands, and Scrapes Compatible: M12 LITHIUM-ION System with over 25 cordless tools Accessory Adaptor (Included): Compatible with most competitive accessories Run Time: REDLITHIUM Batteries offer extended run time Durability: All Metal gear case, Variable Speed Dial: Match speed to application On board Fuel Gauge: Displays Remaining Run Time Includes: (1) M12 Cordless LITHIUM-ION Multi-Tool (2426-20) (5) Assorted Sanding Sheets (1) Sanding Pad, (1) Wood Cutting Blade


Part Number Length Description242620 10-1/4" M12 Cordless Lithium-Ion Multi-Tool

M12 Lithium-Ion Multi-Tool Kit- Model-2426-21The M12 Cordless LITHIUM-ION Multi-Tool is one of the most versatile jobsite tools. This 12V cordlessoscillating tool is ideal for remodelers, flooring contractors, maintenance repair technicians, and electricians that tackle awkward applications Features: Application Versatility: Cuts, Grinds, Sands, and Scrapes Compatible: M12 LITHIUM-ION System with over 25 cordless tools Accessory Adaptor (Included): Compatible with most competitive accessories Run Time: REDLITHIUM Batteries offer extend


Part Number Length Description242621 10-7/8" M12 Cordless Lithium-Ion Multi-Tool Kit with One Redlithium Battery

M12 Lithium-Ion Multi-Tool Kit- Model-2426-22Features: Application Versatility: Cuts, Grinds, Sands, and Scrapes Compatible: M12 LITHIUM-ION System with over 25 cordless tools Accessory Adaptor (Included): Compatible with most competitive accessories Run Time: REDLITHIUM Batteries offer extended run time Durability: All Metal gear case, Variable Speed Dial: Match speed to application On board Fuel Gauge: Displays Remaining Run Time Includes: (1) M12 Cordless LITHIUM-ION Multi-Tool (2426-20) (2) M12 REDLITHIUM Battery (48-11-2401) (1) M12 Lithium-ion Battery Charger (48-59-2401) (1) Adapter, (5) Assorted Sanding Sheets, (1) Contractor Bag (1) Sanding Pad, (1) Wood Cutting Blade


Part Number Length Description242622 10-7/8" M12 Cordless Lithium-Ion Multi-Tool Kit with Two Redlithium Battery




Tools and Test InstrumentsPowerMilwaukeeCordless - PVC ShearM12 Lithium-Ion PVC Shear - Model-2470-20

Features: Powerful motor: Cuts up to 2” schedule 40 PVC in 3 seconds All-metal planetary drive: Delivers more than 200 cuts per charge Ultra-sharp 3-mm blade: Eliminates burrs and shavings Quick-return mechanism: Save time when making repetitive cuts Convenient offset blade: Facilitates cutting of PVC in walls, close to walls or in the ground REDLITHIUM Battery Technology: Superior pack construction, electronics, and performance deliver

more work per charge and more work over pack life than any battery on the market Stainless steel reinforced blade and aluminum jaw: Resistant to impact, water and rust for a longer

tool life Variable-speed trigger: Delivers controlled cuts regardless of the temperature Includes: (1) M12 Cordless Lithium-Ion PVC Shear (2470-20)


Part Number Length Description247020 14-3/8" M12 Cordless Lithium-Ion PVC Shear

M12 Lithium-Ion PVC Shear Kit - Model-2470-21Features: Powerful motor: Cuts up to 2” schedule 40 PVC in 3 seconds All-metal planetary drive: Delivers more than 200 cuts per charge Ultra-sharp 3-mm blade: Eliminates burrs and shavings Quick-return mechanism: Save time when making repetitive cuts Convenient offset blade: Facilitates cutting of PVC in walls, close to walls or in the ground REDLITHIUM Battery Technology: Superior pack construction, electronics, and performance deliver

more work per charge and more work over pack life than any battery on the market Stainless steel reinforced blade and aluminum jaw: Resistant to impact, water and rust for a longer

tool life Variable-speed trigger: Delivers controlled cuts regardless of the temperature Includes: (1) M12 Cordless Lithium-Ion PVC Shear (2470-20) (1) M12 REDLITHIUM Battery (48-11-2401) (1) M12 Lithium-ion Battery Charger (48-59-2401) (1) Carrying Case


Part Number Length Description247021 14-3/8" M12 Cordless Lithium-Ion PVC Shear Kit




Tools and Test InstrumentsPowerMilwaukeeCordless - Recip SawHackzall M12 Lithium-Ion Recip Saw - Model-2420-20

Features: Only 11" and 2.2 lbs. for cutting in tight spaces Keyless QUIK-LOK Blade Clamp allows for quick and easy blade changes All-Metal Gear Case for added durability Variable Speed Trigger for increased user control Battery Fuel Gauge displays remaining run-time Accepts both HACKZALL and SAWZALL style blades Built-In LED Light illuminates work surface Includes: (1) HACKZALL M12 Cordless LITHIUM-ION Recip Saw (2420-20)


Part Number Length Description242020 11" Hackzall M12 Cordless Lithium-Ion Recip Saw

Hackzall M12 Lithium-Ion Recip Saw - Model-2420-21/22Features: Only 11" and 2.6 lbs. for cutting in tight spaces 12V RED LITHIUM Battery offers longer run-time and lighter weight Keyless QUIK-LOK Blade Clamp allows for quick and easy blade changes All-Metal Gear Case for added durability Variable Speed Trigger for increased user control Battery Fuel Gauge displays remaining run-time Accepts both HACKZALL and SAWZALL style blades (See related products for listing of

HACKZALL blades) Built-In LED Light illuminates work surface Includes: (1) HACKZALL M12 Cordless LITHIUM-ION Recip Saw (2420-20) M12 REDLITHIUM Battery (48-11-2401) (1) M12 Lithium-ion Battery Charger (48-59-2401) (1) Contractor Bag


Part Number Length Description242021 11" Hackzall M12 Cordless Lithium-Ion Recip Saw, Redlithium Battery, Lithium-ion Battery Charger242022 11" Hackzall M12 Cordless Lithium-Ion Recip Saw, Two Redlithium Battery, Lithium-ion Battery

Charger




Tools and Test InstrumentsPowerMilwaukeeCordless - Tubing CutterM12 Lithium-Ion Copper Tubing Cutter - Model-2471-20

Features: Powerful 500-RPM motor: Cuts up to 10X faster than conventional cutters Versatile cutting mechanism: Automatically adjusts from 3/8” to 1” tubing and rotates to cut in

confined spaces Water-resistant sealed head and unibody construction: Deliver exceptional durability REDLITHIUM Battery Technology: Superior pack construction, electronics and performance deliver

more work per charge and more work over pack life than any battery on the market Includes: (1) M12 Cordless Lithium-Ion Copper Tubing Cutter (2471-20)


Part Number Length Description247120 14" M12 Cordless Lithium-Ion Copper Tubing Cutter

M12 Lithium-Ion Copper Tubing Cutter Kit - Model-2471-21Features: Powerful 500-RPM motor: Cuts up to 10X faster than conventional cutters Versatile cutting mechanism: Automatically adjusts from 3/8” to 1” tubing and rotates tocut in

confined spaces Water-resistant sealed head and unibody construction: Deliver exceptional durability REDLITHIUM Battery Technology: Superior pack construction, electronics and performance

deliver more work per charge and more work over pack life than any battery on the market Onboard Battery Fuel Gauge: Displays remaining runtime, Built-in LED light: Illuminates line of cut Exceptional Milwaukee Tool warranty: Covers 5 years on tools and 2 years on batteries Includes: (1) M12 Cordless Lithium-Ion Copper Tubing Cutter (2471-20) (1) M12 REDLITHIUM Battery (48-11-2401) (1) M12 Lithium-ion Battery Charger (48-59-2401) (1) Carrying Case


Part Number Length Description247121 14" M12 Cordless Lithium-Ion Copper Tubing Cutter Kit




Tools and Test InstrumentsRefrigerationCPSCharging ScalesStandard Series - COMPUTE-A-CHARGE

With accuracy specifications exceeding all OEM requirements for charging accuracy, that is twice as good as any competitive unit on the market. The Standard Series of Compute-A- Charge scales are performance leaders in accuracy and reliability and the standard by which all others are measured. The competition simply doesn't measure up! Features: Accuracy specification exceeds all OEM requirements for charging accuracy and is twice as good as any

competitive unit on the market Temperature compensated over the entire operating temperature range to maintain charging accuracy

under all ambient conditions, Environmentally sealed strain gage beam load cell technology first introduced by CPS in 1985

Designed to withstand overloads of 150% High contrast wide angle LCD Display for ease of viewing Platform can be removed from carrying case Magnetic back on handheld unit Hanging hook,User selectable automatic power off to conserve batteries Powered by 2 AA batteries Specification: Overload Protection: Visual, electronic and mechanical Platform Dimensions: 8 3/4” x 8 3/4" / 22.23cm x 22.23cm Power: Two AA batteries (included) Battery Life: 60 hours of continuous use Battery Indicator: Battery symbol with 3 segment display Readout: Imperial / Metric

http://www.cpsproducts.com

Part Number Operating Temperature °F (°C) DescriptionCC110 14 (-10) - 122 (50) Standard Series Compute-A- Charge Scale, 110 lbs Work Load Capacity

Flaring and SwagingClutch Driven Flaring Tool

Features: R-410A Clutch driven flaring tool with ratchet and case for 3/16", 1/4", 5/16", 3/8", 1/2", 5/8" & 3/4"

O.D. tubing, Engineered to create stronger flare joints for high pressure R-410A systems Unique clutch driven feed screw and faceted cone produce uniform, clean flare walls without thin

spots or galling, Provides an exact amount of flaring torque with break away clutch system Innovative 3/8" square drive incorporated directly in yoke handle for use of ratchet Rugged polyethylene storage case included, 1 year warranty


Part Number DescriptionFT800FN Clutch Driven Flaring Tool with Ratchet and Case




Tools and Test InstrumentsRefrigerationCPSHoses & Accessories1/4" Premium Hoses For All Refrigerants

Part Number Length DescriptionHP5 5’ - 150cm 1/4" Premium Hoses for All Refrigerants, 3-Pack, 5’ Length

1/4" Premium Hoses With 45° Ball Valve On End

Part Number Length DescriptionHP5E 5’ - 150cm 1/4" Premium Hoses with 45° Ball Valve On End, 3-Pack, 5’ Length

1/4" Premium Hoses With MICROSEAL Anti-Blowback Valve On One EndSuper compact design (.75” x 1”, 19mm x 25mm) enables access to service ports in tight quarters


Part Number Length DescriptionHP5A 5’ - 150cm 1/4" Premium Hoses with Microseal Anti-Blowback Valve On One End, 3-Pack, 5’ Length

6" Ball Valve Hose Extensions

Part Number DescriptionHTE 6" Premium Hose with 1/4" SAE M Ball Valve x 1/4" SAE FM Fittings




Tools and Test InstrumentsRefrigerationCPSLeak SeekerLeak Seeker II

CPS Products proudly introduces the all new Leak-Seeker II featuring E_MOS technology.Packed with unique design features the new Leak-Seeker II from CPS is the best leak detector. Features: Microprocessor controlled sensor electronics utilizing a multi channel signal detection method,

improves sensitivity while reducing false alarm New E_MOS sensor technology incorporates a proprietary pulse modulation design to increase both

battery and sensor liferm Software managed sensor rejuvenation mode, automatically initiated at each start up ensures the

highest level of sensitivity every use, for up to 500 hours of detecting leaks of less than .1 oz per year, Sensitivity remains constant over the life of the sensor

Dynamic signal analysis and automatic sensitivity control, enables the Leak-Seeker® II to make quick work of any leak regardless of its size or the refrigerant type…without operator intervention, The only leak detector with fully automatic sensitivity selection and control

Sensitivity to 35 parts per million (less than .01 oz per year) Meets or exceeds all US and International standards Superior sensitivity to R410A and new HFO refrigerants Sensor not contaminated by R404a Senses all refrigerants including those with hydrocarbon components 500 hours sensor life, 50 hour battery life (3 C batteries), 2 year warranty


Part Number DescriptionLS2 Leak-Seeker II Featuring E_MOS TechnologyEMOS2 Replacement E_MOS Sensor for Leak-Seeker II

Manifolds & GaugesBlackmax Series 4-Valve Manifolds - 1/4" SAE Fittings & 3/8" SAE VAC Port

BlackMax Black & Chrome series 4 valve anodized aluminum block body with three 1/4" SAE and one 3/8" SAE vacuum port, Vortech Deep Vacuum Valves, extra large sight glass, easy-to-read 3-1/8" (80mm) Class 1.0 accuracy gauges, protective gauge boots, and hanging hook. MADE IN USA Specifications: Body Type: 4 valve anodized aluminum body with three 1/4" SAE charging ports, one 3/4” SAE

vacuum port and large sight glass Valve Type: Vortech Deep Vacuum Valves Gauge Type: 3-1/8" (80mm), Class 1.0 with internal silicon dampening cup for Flutter-Free operation Hoses: Premium 5 ft Pro-Set hoses with 1/4" SAE 45° ball valves on ends


Part Number Packaging DescriptionMV4H4P5EZ Custom tin box BlackMax Black & Chrome Series 4 Valve




Tools and Test InstrumentsRefrigerationCPSManifolds & GaugesDigital Vacuum Gauge - Vacrometer

Features: Individually calibrated to strict NIST standards with accuracy of ± 10 % of reading Incorporates surface mount technology for exceptional performance and reliability Advanced circuit design automatically compensates for ambient temperature changes Selectable measurement units in Microns, Torr, in/hg or mBar Field cleanable sensor with extended range from atmosphere down to 0 microns Specifications: Sensor Type: Self-heated thermistor br idge with integral temperature compensation from 0 to 50 °C

(32 to 122 °F) Power Source: One 9 volt alkaline battery (included) Battery Life: 30 hours of continuous use. Auto-off after 10 minutes Mechanical Connection: Standard 1/4" female SAE refrigerant hose type with core depressor Battery Indicator: Battery symbol with 3 segment Power Level Bar Graph


Part Number Accuracy Maximum WorkingPressure

Operating & StorageHumidity

Description

VG200 +/- 10% of Reading 400 PSIG 0-95%, non-condensing Vacrometer Vacuum Gauge with Digital Display

Two Valve Manifolds - Workingmans Choice The Workingman's Choice series 2 valve anodized aluminum block body with 1/4" SAE 45° fittings, Triple Seal piston valves, sure grip rubber over metal valve handles, easy-to-read 3-1/8" (80mm) Class 1.0 accuracy gauges, protective gauge boots, extra access port in center with Schrader valve and hanging hook. Specifications: Body Type: 2 valve anodized aluminum body with 1/4" SAE fittings Valve Type: Triple Seal piston valves Gauge Type: 3-1/2" (80mm) Class 1.0 with internal silicon dampening cup for Flutter-Free operation Hoses: Premium 5 ft Pro-Set hoses with 1/4" SAE 45° ball valves on ends


Part Number Packaging DescriptionMT2H7P5E Soft protective manifold carrying case Workingman’s Choice Series 2 Valve

Two Valve Service Manifolds - BlackmaxPiston series 2 valve anodized aluminum block body with 1/4" SAE 45° fittings, Triple Seal piston valves, 2-1/2" (68mm) Class 1.6 accuracy gauges, extra access port in center with Schrader valve and hanging hook Specifications: Body Type: 2 valve anodized aluminum body with 1/4" SAE fittings Valve Type: Triple Seal piston valves Gauge Type: 2-1/2" (68mm) Class 1.6 accuracy gauges with internal silicon dampening cup for Flutter-Free

operation Hoses: Premium 5ft Pro-Set hose set with 1/4" SAE fittings


Part Number Packaging DescriptionMBHP5 Clamshell Piston Series 2 Valve Anodized Aluminum Block Body




Tools and Test InstrumentsRefrigerationCPSMolecular TransformatorPRO-SET MT69 Molecular Transformator

The effects of high ambient temperatures and elevated tank pressures on the recovery process are well known.As the temperature / pressure of the recovery cylinder increases, the speed of the recovery process decreases until it is finally halted by a high pressure shut down. The Pro-Set MT69 Molecular Transformator provides valuable assistance in the transformation of high temperature / pressure vapor refrigerant into low temperature / pressure liquid refrigerant, dramatically improving recovery speed and efficiency. The Molecular Transformator is a patent pending "Innovation in Design" from CPS, intended for use with all commercially available brands of refrigerant recovery equipment. It is extremely easy to use, saves time and money and provides the missing link in high ambient performance that exists in all commercially available recovery machines on the market today.


Part Number Dimensions Discharge PressureGauge

Heat SinkTemperature

Inlet / Outlet Description

MT69 4" D x 12" H 0 to 600 PSIG 100 °F 1/4" SAE Male Molecular Transformator, Designed for Usewith Any Recovery Machine

Refrigerant RecoveryPRO-SET TR21 Recovery System

Features: Fastest, Smallest, Lightest, Best looking and Most reliable heavy duty recovery machine in the world. Revolutionary "vacuum pump" style design Designed and Manufactured in the USA


Part Number Dimensions High PressureShut-Off

OperatingTemperature °F (°C)

Overload Protection Description

TR21 6" x 12" x 9" 550 psig 32 (0) - 120 (49) Motor ThermallyProtected

Fastest, Smallest, Lightest, Best Looking andMost Reliable Heavy Duty Recovery Machine

Specifications: Compressor Type: 2 Cylinder Oil-less Reciprocating Compressor Filtration: Cleanable 100 - mesh screen integrated into Suction Port Refrigerants: R-12, R-134a, R-401C, R-406A, R-500, R-401A, R-409A, R-401B, R-412A, R-411A, R-407D, R-22, R-

411B, R-502, R-407C, R-402B, R408A, R-509, R-407A, R-404A, R-402A, R-507, R-407B, R-410A TR21 Recovery Rates per ARI - 740 – 98

Lbs / min Kg / min Push

Pull Liquid Vapor High Temp Vapor (104’)

Push Pull Liquid Vapor High Temp Vapor

(104’) R22 31.53 8.86 0.597 0.860 14.30 4.02 0.271 0.390

R134a 25.66 7.80 0.503 N/A 11.64 3.54 0.228 N/A R407C 29.14 9.50 0.536 N/A 13.22 4.31 0.243 N/A R410A 31.70 11.95 0.703 0.816 14.38 5.42 0.319 0.370




Tools and Test InstrumentsRefrigerationCPSTool KitR-410A Mini-Split A/C Tool Kit With Triple-Seal

R-410A Ductless mini-split tool kit with Triple-Seal™ 2 valve manifold and metric torque wrench setFeatures: Kit includes essential tools for install/service of ductless mini-split a/c units with 5/16" (1/2"-2o UNF)

fittings


Part Number DescriptionTLB410A R-410A Ductless Mini-Split Tool Kit with Triple-Seal 2 Valve Manifold And Metric

Torque Wrench Set

Tube BenderUniversal Ratcheting Tube Bender

Features: Universal kit bends tube from 1/4" to 7/8" (6 to 22mm) Metal ratcheting system built for long life Durable mandrel


Part Number DescriptionTB250 Universal Ratcheting Tube Bender

Vacuum PumpsPro-Set Dual Voltage Two Stage Vacuum Pumps

The VP6D Pro-Set Premium Series vacuum pump is a 6 CFM, 2 stage unit with a versatile dual voltage 1 / 2 HP motor. The unit boasts the same high quality, high value features engineered into all of our Pro-Set vacuum pumps providing performance excellence and years of reliable service. Features: Dual voltage operation 110-120V / 220V 50 / 60Hz Exceptional ultimate vacuum rating as low as 10 microns Advanced air cooled motor design for operation in high ambient temperatures Proprietary oil mist free exhaust port cap for clean, safe job environment Gas ballast valve speeds achievement of deep vacuum Multiple port connections for 1 / 4", 3 / 8" and 1 / 2" ACME Easy maintenance with large oil sight glass and fill port with easily accessible oil drain port Solid rubber base provides extreme shock resistance Sure grip handle ergonomically designed for superior comfort and portability Motor thermally protected, dual voltage units have extra IEC fuse


Part Number Dimensions Motor Size (HP)RPM @ 50 / 60 Hz

Oil Capacity OperatingTemperature °F (°C)

Description

VP6D 13.1" x 5.5" x 10" 1 / 2 (HP) 2880 /3440 RPM

14 Oz. / 400 ml 32 (0) - 125 (52) Pro-Set Premium Series Vacuum Pump, 6CFM, 2 Stage Unit




Tools and Test InstrumentsRefrigerationCPSVacuum PumpsPro-Set Premium Series Vacuum Pumps

The VPC4SU Premium Compact series of Pro-Set vacuum pumps incorporate the perfect balance of professional grade performance features in an extremely portable, lightweight package. This innovative 4 CFM, single stage unit is factory tested. Features: Innovative compact and lightweight design weighs only 11.0 lb / 5 kg Exceptional ultimate vacuum rating as low as 100 microns Advanced air cooled motor design for operation in high ambient temperatures Proprietary oil mist free exhaust port cap for clean, safe job environment Easy maintenance with large oil sight glass and fill port with easily accessible oil drain port Solid rubber base provides extreme shock resistance Sure grip handle ergonomically designed for superior comfort and portability Extremely compact and portable design, Motor thermally protected


Part Number Dimensions Motor Size (HP)RPM @ 50 / 60 Hz

Oil Capacity OperatingTemperature °F (°C)

Description

VPC4SU 11.3" x 4.5" x 8.0" 1 / 5 (HP) 2880 /3440 RPM

10 Oz. / 300 ml 32 (0) - 125 (52) Pro-Set Premium Compact Series VacuumPump, 4 CFM, Single Stage Unit

WrenchesPRO-SET Metric Torque Wrench Kit

Features: Professional interchangeable jaw torque wrench set ensures compliance with OEM torque settings for

high pressure R-410A systems Interchangeable 17, 22, 24, 26, 27 & 29mm jaw sizes Corresponding settings clearly marked on torque wrench in Newton Meters (10-75Nm) Provides consistently accurate readings and rugged, trouble free performance Includes storage case for long-term protection, 1 year product warranty


Part Number DescriptionTLTWSM Professional Interchangeable Jaw Torque Wrench Set

SAE Torque Wrench Kit

Part Number DescriptionTLTWSAE SAE Torque Wrench Kit




Tools and Test InstrumentsRefrigerationFieldpieceManifolds & Gauges4 Port Wireless Digital Manifold - SMAN4

Features: 4 Ports, Wireless Measurements 6 Live Readings Micron Gauge Large 3/8” port Alarms & Stopwatch Simultaneous Superheat and Subcooling

Includes: 4-port Wireless Manifold - SMAN4 Pipe Clamp Thermocouples (2) - ATC1 Wet Bulb Thermocouple - ATWB1 Dry Bulb Thermocouple - ATA1 Padded Drawstring Pouch - ANC10 Operator’s manual


Part Number DescriptionSMAN4 4 Port Wireless Digital Manifold

JBCore RemoverValve Core Remover

Features: 1/4" valve core remover with access port Specifically designed to valve off the system to remove valve cores, this core remover has the access

port, Storage area houses spare valve cores Features a quarter turn ball valve shut-off fitting and o-ring seals the valve core can be completely

removedand replaced without losing system charge Speed up evacuation, recovery, or recharging time through the full flow port

http://www.jbind.com

Part Number DescriptionA32525N 1/4" Valve Core Remover with Access Port

Couplers Couplers - Quick Coupler Shut-Off Fittings

Features: Use this quick coupler with existing charging hose Immediately traps refrigerant discharge from hose when disconnecting from access fitting All tees and crosses are tapped to receive an access core in all 1/4" SAE flare ends All pipe connections have internal braze cups for dip tube applications All valves are equipped with cap and one valve core (braze type, loosely assembled) Valve core is stainless steel and brass for use with all refrigerants including R-410A Resistant to oils, alkalites, and diluted mineral acids


Part Number Temperature Range °F (°C) Description33112N -40 (-40) - 250 (121.1) 1/4" QC x 1/4" SAE Refrigerant Shut-Off Coupler33113N -40 (-40) - 250 (121.1) 1/4" QC x 1/4" SAE Refrigerant Shut-Off Coupler at 90 Degree Angle




Tools and Test InstrumentsRefrigerationJBCouplers Couplers - Straight Quick Coupler

Features: 5/16" quick coupler x 1/4" SAE 5/16" couplers have valve core depressor, safety channels, and a rubber gasket seal All tees and crosses are tapped to receive an access core in all 1/4" SAE flare ends All pipe connections have internal braze cups for dip tube applications All valves are equipped with cap and one valve core (braze type, loosely assembled) Valve core is stainless steel and brass for use with all refrigerants including R-410A Resistant to oils, alkalites, and diluted mineral acids


Part Number Temperature Range °F (°C) DescriptionQC-S5 -40 (-40) - 250 (121.1) 5/16" QC x 1/4" SAE Coupler, for Use with Mini Splits

Hoses & AccessoriesKobra High Pressure Hose

Features: Set of three 60" (152 cm) kobra high pressure hose CLS series CLS series features a secure seal fitting that opens to full flow Automatically traps refrigerant discharge in the hose Use P90022 as replacement o-ring, Kobra hoses are fast, fierce, and flexible Our hoses offer maximum flow with no blowouts Simply put, kobra hoses are the best hoses in the industry Our revolutionary patent-pending design on our internal structure significantly reduces blow outs

and provides maximum flow The gasket, barb, depressure, and cup have all been upgraded The gasket features a hood with a straight edge that snaps into the straight edge of the barb This straight edge to straight edge force eliminates gasket blow outs The depressor is barbed, and locks into the gasket The outward force of the depressor pushes the gasket further into place resulting in no blow outs In addition to the changes in the fitting, JB's series of kobra high pressure hoses are made from

kevlar- the same material that stops bullets in bullet-proof vests This provides a 5 to 1 safety factor (better than the industry standard of four to one) Kevlar makes our hoses incredibly strong and flexible JB also uses a common crimp that grips the full circumference of the hose yielding a maximum

hold and uniform seal that prevents leaks and bursts Kobra hoses feature a nitrile cover which is better than neoprene because it is more resistant to oil,

giving the hoses a longer life Pressure rating 800 psi and 4000 psi burst, Suitable for R-410A Can be used with all common refrigerants except ammonia


Part Number DescriptionCCLS-60 Set of Three 60" Kobra High Pressure Hose CLS Series




Tools and Test InstrumentsRefrigerationJBLeak DetectorsProwler Leak Detector

Features: Using JB's proprietary electrochemical sensor technology for unparalleled accuracy coupled with the

unique user features, there is simply no better hand held probe type service leak detector system on the market

The sensor is durable and will not be damaged by overexposure to refrigerant gas or contaminated by condensate water

The sensitivity is extremely accurate for ALL HFC, HCFC, blends, and the new HFO refrigerants The technology provides for low battery consumption, excellent circuit stability, extremely long sensor

life, and the electrochemical function of the sensor does not diminish over time with use The sensor life has been tested to last over ten years Safe to use in combustible atmosphere The PROWLER features a large LCD screen that has a backlight and flips upward so that the user

can adjust the screen position for better visibility The bar graph shows the intensity of the leak to help pinpoint the source of the leak Sensitivity can be programmed to high, medium, and low If a leak is detected, there is an audible alarm (which can be muted), a bar graph on the screen, and

the handle will vibrate The PROWLER does not require rechargeable batteries as it operates on 4 AA batteries (included) Certified to Standards CE, SAE J2791, and EN 14624 An example of sensitivity (detects all refrigerants this is just a partial list): R-410A 0.05 oz/yr., R-407A

0.05 oz/yr., R404A 0.05 oz/yr., R427A 0.05 oz/yr., R22 0.025 oz/yr., R134a 0.05 oz/yr., R1234yf 0.0125 oz/yr

R1234yf is a replacement for all HFC (134a) and HCFC (22) refrigerants that are currently being phased out

It is an A2L flammable refrigerant as defined by ASHRAE 34 Backed by a two year replacement warranty


Part Number DescriptionLD5000 Prowler Leak Detector in Case




Tools and Test InstrumentsRefrigerationJBLocking CapsNovent Locking Caps

Features: Refrigerant locking cap for universal refrigerants, pack of 4 Novent created the original, patented, tamper resistant refrigerant locking caps in response to evidence

of theft by teenagers for the use of "huffing" Huffing many times results in brain damage and even death after inhaling or "huffing" refrigerant Novent caps are installed on the service valves on all air conditioning and mini split systems These locking caps are precisely machined from high-grade brass encompassed within a protective

refrigerant color-coded aluminum casing Novent caps are corrosion resistant and have an o-ring seal to provide a positive back-up for leaking

service valves The caps are secured on to a unit with a special key sold only to certified hvac technicians and provide

a tamper resistant barrier to reduce theft, vandalism, and the accidental mixing of refrigerant Adopted into 2009 IRC (international residential code) and 2009 IMC (international mechanical code)

code 1101.10 requiring locking access caps on outdoor refrigerant systems to prevent easy access


Part Number DescriptionNCU-4 Novent Locking Cap Universal, 4 Pack

Pocket Key for All Novent Locking CapsFeatures: Refrigerant locking key for all novent caps Fits in pocket and locks and unlocks green, pin, and universal caps Novent created the original, patented, tamper resistant refrigerant locking caps in response to evidence

of theft by teenagers for the use of "huffing" Huffing many times results in brain damage and even death after inhaling or "huffing" refrigerant Novent caps are installed on the service valves on all air conditioning and mini split systems These locking caps are precisely machined from high-grade brass encompassed within a protective

refrigerant color-coded aluminum casing Novent caps are corrosion resistant and have an o-ring seal to provide a positive back-up for leaking

service valves The caps are secured on to a unit with a special key sold only to certified hvac technicians and provide

a tamper resistant barrier to reduce theft, vandalism, and the accidental mixing of refrigerant Adopted into 2009 IRC (international residential code) and 2009 IMC (international mechanical code)

code 1101.10 requiring locking access caps on outdoor refrigerant systems to prevent easy access


Part Number DescriptionNC-KEY Pocket Key for All Novent Locking Caps




Tools and Test InstrumentsRefrigerationJBManifolds & Gauges4 Valve Aluminum Zeppelin Manifold

Features: Model aluminum 4 valve zeppelin manifold, 3-1/8" glow-in-the-dark gauges R-22, R-404A, R410A,

includes set of four 60" (152 cm) Kobra CCLE high pressure hoses The aluminum four valve manifold zeppelin series features the JB full flow design for faster

Evacuation, Original free floating dual o-ring sealing system and stem seats that full retract result in fast evacuation and charging

Precisely machined anodized aluminum body is rugged and durable Cutting edge styling and technology significantly reduce weight of manifold while the soft molded

handwheels rotate 2-1/2 turns to full open/ close Full 3/8" bore evacuates 40% faster than leading four valve manifold Metal gauges with color coded refrigerant dials for durability and surge dampened for reduced needle

movement Available for use with R-410 check gauge scales Available with standard 2-1/2", 3-1/8" glow in the dark gauges, and 3-1/8" liquid filled gauges Boots are available separately Please refer to part numbers for boots Metric versions available Replaceable intake and hose holder fittings Completely repairable Limited lifetime warranty on manifold bar


Part Number Description25233 Aluminum 4 Valve Zeppelin Manifold, 3/8" Glow-In-The-Dark Gauges with Kobra Hose Set

Atlas Refrigerant Charging ScaleFeatures: The award winning atlas refrigerant charging scale is designed for the HVAC/R industry Everyday users will appreciate the advanced solid state load cell for superior sensitivity (0.25 oz/ 10 gram) and accuracy 220 pound (100 kg) weight capacity, all metal construction, heavy duty carrying case, and easy

to read handheld combine to make the atlas the best overall scale on the market Our 220 pound scale competes at a 110 pound price Pieces are modularized so parts are easily replaced without need to purchase entirely new unit Handheld has a large LCD screen that can be read from a distance and in direct sunlight Displays weight in decimal pounds, pounds and ounces, and kilograms Auto shut off after 30 minutes can be disabled Load cell allows accurate weight without the cylinder directly on the center of weighing platform Operates on a 9 volt battery (included) For use indoor and outdoor but is not waterproof 85% relative humidity at 113 degrees f (45 degree c), non condensing No issue in operating up to altitudes of 6500 feet (2000 meters) Pollution degree 2, Overvoltage category 2 24 month warranty Winner of the 2007 dealer designs bronze medal


Part Number Altitude Battery Life Humidity Operating Temperature°F (°C)

Description

DS-20000 6500 feet approximately 60hours

85% RH @113°F(45°C), Non Condensing

32 (0) - 122 (50) Atlas Refrigerant Charging Scale, Designed forThe HVAC/R Industry, 220 lb Weight Capacity



111

Tools & Test Instruments 111

Tools and Test InstrumentsRefrigerationJBManifolds & GaugesMicron Gauges - Deep Vacuum

Features: The award winning supernova digital micron gauge allows the service technician to be certain when

a system is properly evacuated and dehydrated of air and moisture before charging with refrigerant Model includes a heavy duty plastic carrying case and AC adapter The supernova is accurate from 12,000 microns down to 10 microns Factory calibrated and requires no additional calibration Brass fitting on a lengthy flexible cord for hard to reach places Measures in microns, psia, inhg, pascals, torr, mtorr, and mbar Large, easy to read LCD screen If the sensor gets contaminated, clean with simple alcohol Features many user defined programmable options such as duration of backlight, shut off,and the

ability to set alarms when system reaches a defined mark Powered by three AA batteries (not included) 12 month warranty Winner of the 2009 dealer designs bronze medal Please use P90009 as replacement o-ring.


Part Number DescriptionDV-41 DV-40 with Protective Carrying Case And AC Adapter

Micron Gauges - Digital Vacuum GaugeFeatures: The DV-22 reads vacuum in seven international units: microns, psia, inhg, mbars, pascals, torr, and

mtorr Low battery indicator alerts to replacing 9 volt battery (not included) Saves last vacuum read out after shut down The unit is leak proof with an o-ring coupler to ensure proper register of vacuum. Powers off after 10 minutes of no use to preserve battery life Nist traceable The T2-4 flare tee can be used to attach hoses to the gauge Sold separately, 12 month warranty Please use P90009 as replacement o-ring


Part Number AmbientTemperature °F (°C)

Effective MicronRange

Description

DV-22N 32 (0) - 120 (48.9) 20 - 9,000 Hand Held Digital Vacuum Gauge, Effective Micron Range of 20 to 9,000




Tools and Test InstrumentsRefrigerationJBManifolds & GaugesRevolver Ball Valve Manifold

Features: Model ball valve manifold only, standard 2-1/2" for R-12, R-22, R502 Features four valves that operate with an internal metering ball valve that can do finite openings

perfect for charging in liquid form No liquid charging adapter necessary Sturdy brass construction with hose holders that swivel to the front or back for greater flexibility Quarter turn handles for full Open/Close and have gradients to assist in liquid charging Full 3/8" bore lets you work quickly and efficiently


Part Number Description26000 Revolver Brass 4 Valve Ball Valve Manifold

Two Valve Standard Brass ManifoldFeatures: Model m2 manifold, standard 2-1/2" gauges, R-22, R-404A, R-410A, includes set of three 60" kobra

CCLE high pressure hoses The industry standard brass two valve manifold m2 ser ies Features the JB full flow design for faster evacuation Original free floating dual o-ring sealing system and stem seats that full retract result in fast

evacuation and charging Angled bar for knuckle clearance Handwheels rotate 2-1/2 turns to full open/ close Metal gauges with color coded refrigerant dials for durability and surge dampened for reduced

needle movement Available for use with R-410 check gauge scales Available with standard 2-1/2" or 3-1/8" glow in the dark gauges and with or without boots Metric styles available, Please check each model description Replaceable intake and hose holder fittings, Completely repairable Limited lifetime warranty on manifold bar


Part Number DescriptionM2-5-410A Standard Brass Two Valve Manifold




Tools and Test InstrumentsRefrigerationJBSeal CapRepair Parts - O-Ring Seal Cap

Features: 1/4" SAE cap, Package of 10 For deep vacuum and a/c refrigeration Finger tight sealing for all male SAE connections All valves are equipped with cap and one valve core (braze type, loosely assembled) Valve core is stainless steel and brass for use with all refrigerants including R-410A Resistant to oils, alkalites, and diluted mineral acids


Part Number Temperature Range °F (°C) DescriptionNFT5-4 -40 (-40) - 250 (121.1) 1/4" SAE Cap, Pack of 10

Tube CuttersMini Max

Features: Copper mini max tube cutter for 1/8" to 1-1/8" OD Used for cutting copper tubes, these cutters have a large knurled knob and a handy design that

produce fatigue-free pressure control There are two recessed guide rollers that assist with cutting close to flares For replacement cutting wheels use RT70017B Backed by a 24 month over the counter warranty


Part Number Cutting Range DescriptionRT70015 1/8" - 1-1/8" OD Copper Mini Max Cutter for 1/8" to 1-1/8" OD

MiniCutFeatures: Copper mini tube cutter for 1/8" to 7/8" OD Used for cutting copper tubes, these cutters have a large knurled knob and a handy design that

produce fatigue-free pressure control There are two recessed guide rollers that assist with cutting close to flares For replacement cutting wheels use RT70017B Backed by a 24 month over the counter warranty


Part Number Cutting Range DescriptionRT70105 1/8" - 7/8" OD Copper Mini Tube Cutter for 1/8" to 7/8" OD




Tools and Test InstrumentsRefrigerationJBTube CuttersRotrac Plus

Features: JB branded copper tube cutter for 1/8" to 1-1/8" OD Precision tube cutter made exclusively for JB by Rothenberger Designed with smooth-running, telescopic action for a consistent working radius Features include a rolling stop which protects the cutting wheel, a protected screw spindle to

shield against dirt and jamming, and a lightweight cast aluminum body The deburrer swivels up and spare cutter wheel is stored in handle For replacement cutting wheels use RT70007B Backed by a 24 month over the counter warranty


Part Number Cutting Range DescriptionRT70020 1/8" - 1-1/8" OD Copper Tube Cutter for 1/8" to 1-1/8" OD

WrenchesService Wrench

Features: 1/4", 3/16" on one end and 3/8", 5/16" on other Double end reversible ratchet wrenches feature accurate ly broached multiple openings and offer the

greatest number of uses in a single unit


Part Number DescriptionT21127U 1/4" & 3/16" x 3/8" & 5/16" Service Wrench

RitchieBendersFull Range Heavy Duty Tube Benders

Features: For 1/4" to 7/8" radius. Make fast bends on almost every size of soft copper, brass, aluminum, steel and soft stainless steel

tubing to 180°. 60390 is a compact three-in-one bender for 1/4", 5/16" and 3/8" O.D. tubing. Calibrated markings for

bends up to 180° help you duplicate angles. Conforms to Fed. Spec. GGG- B-191-a Type III, Class 2.

http://www.yellowjacket.com

Part Number Description60390 1/4"-5/16"-3/8" 3-in-1 Tube Bender (Bending Radius: 15/16")




Tools and Test InstrumentsRefrigerationRitchieBendersRatchet Hand Bender

Features: Easy one hand bending of 1/4” to 7/8” soft copper and soft aluminum. Hard copper must be annealed before bending. Quick change bending mandrels and shoes Trouble free ratchet mechanism Index marks to locate bends Complete tube bender kit includes all items required to bend 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8" tubing Reverse bending mandrel 60342 sold separately


Part Number Description60331 Complete Ratcher Hand Bender Kit

CouplersSealRight Quick Couplers

Features: Works with or without Schrader core Gaskets resist deterioration from SealRight repair assembly components CFC, HCFC, HFC refrigerants and oils. Field serviceable Made in the USA


Part Number Description19109 1/4" SealRight Straight x 1/4" Male flare, Coupler19209 1/4" SealRight 90° x 1/4" Male flare, Coupler

Cutters and Maintenance PartsHeavy Duty Mini-Cutters

Features: Mini-cutters are compact yet easy to grip and feature large rollers and flare cut-off groove. For heavy duty cutting from 1/4" to 7/8" O.D.


Part Number Description60121 Mini-cutter for 1/4" to 7/8" O.D.




Tools and Test InstrumentsRefrigerationRitchieCutters and Maintenance PartsPremium Tube Cutters

Features: Wide rollers with flare cut-off groove for convenience. Enclosed precision feed mechanism for easy, smooth cutting. Ground surface for easy rolling Wheel retracts into cutter body to save 1" in cutting radius Textured finish is easy to grip and hold Alloy steel wheels have a sharper cutting wheel edge for less burr on copper, aluminum and mild steel tubing Wheels are pinned to rotate in either direction without the screw backing out Corrosion-resistant finish on lightweight aluminum frame Fold away steel reamer with turned cutting edge for deburring Flare cut-off groove for quickly removing damaged flare Small and large sizes available Assembled in the USA *Conforms to Federal Specification GGG-C-771-d, 1-31, 64. Type II, Class 1.


Part Number Description60101 Small Cutter for 1/8" to 1-1/8" O.D.60102 Large Cutter for 1/4" to 1-5/8" O.D.

Electronic Leak DetectorsAccuProbe II Leak Detector

Features: Low, normal and high sensitivity levels with audible signals to quickly and easily pinpoint leaks. Sensitivity: HFC - 0.06 oz. (1.7 g)/year; HCFC - 0.03 oz. (0.9 g)/year; HFO - 0.15 oz. (4.3 g)/year Sensor life: Over 300 hours service life with minimal cleaning and no adjustments Power: 4 AA alkaline batteries, 4.5 hours continuous life Made in the USA Approvals: SAE J1627, SAE J2791, CE, EN14624


Part Number Weight Description69354 15 Oz. AccuProbe II Leak Detector




Tools and Test InstrumentsRefrigerationRitchieElectronic Leak DetectorsAccuProbe UV Leak Detector

Features: Use the electrolyte sensor or UV technology to detect HFC, HCFC and HFO refrigerants, including

SNAP approved hydrocarbon blends. The Smart Alarm LED shows how big or small a leak is on a scale of one to nine. With the

electrolyte sensor, UV lights and Smart Alarm indicator, this is the only tool you need for fast, easy and certain leak detection.

Improved, robust, ergonomic design is easy to use in close areas and extendable into hard-to-reach areas

Long life, stable sensor, Instantaneous response time Clears in 12 seconds or less after exposure to a 1.75 oz/year leak Automatic calibration and reset to environment, Low battery indicator Microcontroller technology, SAE J2791 Certified, CE Marked, EN 14624 24-month limited warranty Sensitivity: HFC - 0.06 oz.(1.7 g)/year; HCFC - 0.03 oz.(0.9 g)/year; HFO - 0.15 oz. (4.3 g)/year Heated solid electrolyte sensor: over 300 hours service life with minimal cleaning and no adjustments Power: 4 AA alkaline batteries, 4.5 hours continuous life Approvals: SAE J2791 certified, CE marked, EN 14624 Made in the USA


Part Number Body Length Calibration Humidity OperatingTemperature

Description

69336 10.5" Automatic 0 to 95% RHnon-condensing

24° to 125°F AccuProbe UV Leak Detector

Flaring and Swaging45° Flaring Tools

Features: Heavy duty is designed for tight spaces Hardened steel flaring bar to resist tube slippage Forged steel yoke that slips over bar and locks with a turn Precision threaded feed screw and long handle Chrome finish


Part Number Description60210 Heavy Duty Flaring Tool for 3/16" to 5/8" O.D.




Tools and Test InstrumentsRefrigerationRitchieFlaring and SwagingDeluxe 45° Flaring Tool

Features: A full range 1/8" to 3/4" O.D. flaring tool for soft copper. Designed with the new R-410A system requi rement in mind Self-centering yoke grips without marring or constricting tube Automatic tube height gauge for correct tubing height Multi-faceted burnishing cone produces a burnished flare seat for a positive seal Easy-to-use with four basic steps Made in the USA


Part Number Description60278 Deluxe Flaring Tool for 1/8" to 3/4" O.D.

Tubing Expander/SwagerFeatures: With long handles for comfortable leverage, easily expand 5/16" to 1-5/8" O.D. soft copper and

aluminum tubing in seconds. Select from nine expander heads to attach to the front of the handles. Precise swaging on the job, Re-round deformed tubes and fittings Salvage shorts and scrap to make couplings Handles, tapered expanding pin, and other moving surfaces heat treated for durability Use on 0.063" wall soft copper and aluminum to 1-5/8" O.D. Use on 0.047" wall soft steel to 7/8" O.D. Kit includes six expander heads; three optional sizes sold separately


Part Number Description60407 Expander Kit with Handles; Heads for 3/8" , 1/2", 3/4", 7/8", 1-1/8" Tubing O.D., Deburring Tool

Fluorescent Leak ScannersMicro LED UV Leak Detection Kits and Lamps

Features: For all A/C systems and lamps. Individual reflectors surround each of five LEDs recessed for

protection in the stainless steel head. Lifetime LEDs, Constant ON switch, Waterproof , AA Alkaline battery included *Dye not for direct injection into R-410A systems due to high pressure


Part Number Description69789 UV LED Flashlight and Dye Kit for AC/R




Tools and Test InstrumentsRefrigerationRitchieHeating InstrumentsDigital Electronic Manometer

Features: The digital electronic manometer eliminates the mess and fragility of U-tubes or diaphragm type gas

pressure gauges. Display unit: Inches of water -19.95" to 19.95" water gauge 0.05" water column resolution Large LCD display Automatic off Long battery life Made in the USA


Part Number Accuracy Description78050 +/- 1.5% FS Digital Electronic Manometer

Gas Pressure Test KitFeatures: Easier to use than a manometer, this compact kit helps you accurately set manifold pressure for

natural or L.P. gas. Sensitive diaphragm gauge calibrated in inches of water column and ounces per square inch Improved lamination strength of diaphragm (bellows) to brass plate withstands h igher over-pressure Tube nipple for easy connection to system manifold,Two gauge ranges available The unique single bellows on brass plate design replaces the double bellows for a stronger seal that

resists greater over-pressure Made in the USA


Part Number Description78060 Complete Test Kit - 0-35" W.C.

Hoses & Accessories9" FlexFlow and Low Loss Adapter Hoses - Compact Ball Valve Assemblies

Features: Flexible hose between valve and fitting for handling in tight areas Operating temperature -20° to 180°F 4000 PSI (276 bar) minimum burst and 800 PSI maximum working pressure Minimum bend radius: 8" UL recognized assemblies Made in the USA


Part Number Description93842 Compact Ball Valve Assemblies, 1/4" Compact ball valve - 45° (3 pak)




Tools and Test InstrumentsRefrigerationRitchieHoses & Accessories9" FlexFlow and Low Loss Adapter Hoses - FlexFlow Assemblies

Features: Flexible hose between valve and fitting for handling in tight areas Operating temperature -20° to 180°F 4000 PSI (276 bar) minimum burst and 800 PSI maximum working pressure Minimum bend radius: 8" UL recognized assemblies Made in the USA


Part Number Description25980 FlexFlow Assemblies, 3-pak 25002, 25202, 25602

PLUS II 1/4" Charging Hoses with Double Barrier ProtectionFeatures: YELLOW JACKET PLUS II hoses have double barrier protection for CFC, HCFC and HFC

refrigerants. 1/4" Plus II hoses are UL recognized assemblies The nylon permeation barrier meets SAE requirements J2196 for CFC, HCFC and HFC refrigerants The moisture barrier provides improved resistance to moisture migration which contaminates

expensive refrigerant 1/4" RYB Plus II hoses are rated for 4000 PSI minimum burst and 800 PSI maximum working

pressure and an operating temperature of -20° to 180°F Minimum bending radius: 6" , Made in the USA, 3 Pak includes a red, yellow and blue hose


Part Number Length Description21060 60" 60", Yellow, HAV Standard Fitting, PLUS II 1/4" Charging Hose21260 60" 60", Blue, HAV Standard Fitting, PLUS II 1/4" Charging Hose21660 60" 60", Red, HAV Standard Fitting, PLUS II 1/4" Charging Hose21985 60" 60", 3 Pak, HAV Standard Fitting, PLUS II 1/4" Charging Hose

PLUS II 1/4" Hose with FlexFlow ValveFeatures: Valve handle position shows when valve is opened or closed Flexible length of hose between valve and fitting makes access to tight areas easier UL recognized assemblies 1/4" RYB PLUS II hoses are rated for 4000 PSI minimum burst and 800 PSI maximum working

pressure and an operating temperature of -20° to 180°F Minimum bending radius: 6" Made in the USA


Part Number Length Description25985 60" 60", 3 pak, PLUS II 1/4" Hose with FlexFlow Valve




Tools and Test InstrumentsRefrigerationRitchieHoses & AccessoriesPLUS II 1/4" with Compact Ball Valve End

Features: Full flow valve, Uses standard gasket and valve opener UL recognized assemblies, Recommended for R-410A 1/4" RYB PLUS II hoses are rated for 4000 PSI (276 bar) minimum burst and 800 PSI maximum

working pressure and an operating temperature of -20° to 180°F Minimum bending radius: 6" Made in the USA


Part Number Length Description29985 60" 60", 3 Pak, Compact Ball Valve, PLUS II 1/4" Hose

PLUS II 3/8" Heavy Duty Combination Charging/Vacuum HoseFeatures: Operating temperature -22° to 176°F 3000 psi minimum burst, 600 psi maximum working pressure Minimum bend radius: 8" Made in the USA


Part Number Length Description15660 60" 60", PLUS II 3/8" Heavy Duty, 3/8" Straight x 3/8" Straight16260 60" 60", PLUS II 3/8" Heavy Duty, 3/8" Straight x 1/4" 45°

Replacement Gasket

Part Number Description19020 1/4" Replacement Gasket, 10 pak

Universal A/C Disposable InjectorsFeatures: Universal disposable 1 oz. applicator for fast economical dispensing, Universal dye for all common

refrigerants and oils. Less costly and faster than many other methods One dye minimizes inventory No back-up refrigerant to move dye into system Maximum system port pressure of 80 psi Not for direct injection into R-410A systems due to high pressure Made in the USA


Part Number Boiling Point Color Form Description69700 Not established F Dark Yellow Oil-like Liquid 1 oz. Injector (6 pak) (12 residential applications/case)




Tools and Test InstrumentsRefrigerationRitchieManifolds & GaugesBRUTE II 4-Valve Test and Charging Manifold (°F and °C)

Features: BRUTE II 4-Valve Test and Charging Manifold provides the flow that's proven faster than any

conventional manifold. The aluminum alloy body is forged for strength and reliability with 3/8" bores through the body to speed

the job. Fourth hose enables connection to hi-/lo-sides, refrigerant tank and recovery unit or vacuum pump for

diagnostics, evacuation and charging without switching hoses Available in 1/4" hi-/lo-sides with 3/8" vacuum port for regular jobs, or 3/8" hi-/lo-sides with 1/2" vacuum

port for larger systems Front access for easy field recalibration Double “O” ring piston for reliability and long service life Exclusive 100-mesh filter in-line on all flare fittings helps keep out particulate materia l and extend the

life of the seat Contoured easy-grip handles for positive control; color-coded for ready identification Sight glass to easily view refrigerant movement and condition during charging and recovery Heavy duty hook won’t pull out Also available with 3-1/2" red and blue liquid-filled gauges Manifold and hose holder fittings 1/4"-3/8"-1/4"-1/4" unless otherwise identified Made in the USA


Part Number Gauge Hi, Lo Charge Hoses Description46013 Red/Blue 1/4" 60” Plus II Compact Ball

Valve - RYB & 3/8” x 45° °F - with 60" PLUS II Compact Ball Valve RYB and 3/8" x 45°,R/B Gauges, PSI, R-22/404A/410A

Class 1 Manifold Gauges - 3-1/8" Dry Manifold Gauges (°F and °C)Features: With 1% accuracy (Class 1) calibration. Large 3-1/8" gauges are housed in a red or blue steel case with front recalibrator screw. High visibility colored temperature scales are easy to read through the full view polycarbonate crystal. Flutterless technology with brass surge protector to minimize needle pulsation Brass gauge movement, Copper alloy Bourdon tube Color-coded red for pressure and blue for compound Color-coded refrigerant types


Part Number Gauge Size Description49105 3-1/8" 3-1/8", Red Pressure, 0-500 psi, R-22/134a/404A Gauge (°F)49106 3-1/8" 3-1/8", Blue Compound, Retard Protection to 350 psi, R-22/134a/404A Gauge (°F)49135 3-1/8" 3-1/8", Red Pressure, 0-800 psi/bar, R-410A Gauge (°F & °C)49136 3-1/8" 3-1/8", Blue Compound, Retard Protection to 500 psi/bar, R-410A Gauge (°F & °C)49137 3-1/8" 3-1/8", Red Pressure, 0-800 psi, R-22/404A/410A Gauge (°F)49138 3-1/8" 3-1/8", Blue Compound, Retard Protection to 500 psi, R-22/404A/410A Gauge (°F)




Tools and Test InstrumentsRefrigerationRitchieManifolds & GaugesProtective Gauge Boots

Features: For 2-1/2", 3-1/8" and solar gauges Rubber boots slip easily around gauges for cushion and protection Fit 2-1/2" and 3-1/8" gauges without covering easy access recalibration screw Color-coded red or blue to match gauge


Part Number Description49190 3-1/8" Set of Gauge Boots

Series 41 Manifolds with 3-1/8" Gauges ( °F and °C)Features: Series 41 manifolds are also available with larger, easier to read 3-1/8" color-coded gauges in

rugged steel cases with polycarbonate crystals. These gauges feature 1% accuracy for an exact reading in critical charge systems. Color-coded scales. Sliding double “O” ring pistons reduce wear. Long life nylon seats. Forged brass body for durability. Full porting maximizes capacity and flow. 60" PLUS II hoses with standard 1/4" flare fittings. Hose assemblies UL recognized for 4000 psi burst and 800 psi working pressure. Made in the USA


Part Number Gauge Description42001 Red/Blue °F - Red/Blue Gauges, Manifold Only, PSI, R-22/404A/410A (clamshell)42004 Red/Blue °F - Red/Blue Gauges, with 60" PLUS II Standard Fittings, PSI, R-22/404A/410A

(clamshell)42005 Red/Blue °F - Red/Blue Gauges, Manifold only, PSI, R-22/134a/404A (clamshell)42006 Red/Blue °F - Red/Blue Gauges, with 60" PLUS II Standard Fittings, PSI, R-22/134a/404A

(clamshell)42024 Red/Blue °F - Red/Blue Gauges, with 60" PLUS II Standard Fittings, Bar/PSI, R-410A (clamshell)




Tools and Test InstrumentsRefrigerationRitchieManifolds & GaugesTITAN 2-Valve Test and Charging Manifold (°F and °C)

Features: Forged aluminum alloy body makes this unit lightweight for handling ease with the durability and

reliability required for repeated use. Large, easy-to-read 3-1/8" steel case red and blue, 1% accuracy (Class 1) gauges Front access for easy field recalibration Double “O” ring piston for reliability and long service life Exclusive 100 mesh filter in-line on all flare fittings helps keep out particulate material and extend the

life of the seats Contoured easy-grip handles for positive control; color-coded for ready identification Sight glass to easily view refrigerant movement and condition during charging and recovery Heavy duty hook won’t pull out Manifold and hose holder fittings all 1/4" unless otherwise identified Made in the USA


Part Number Gauge Hoses Description49887 Red/Blue 60” Plus II - RYB °F - with 60" PLUS II RYB, R/B Gauges, PSI, R-22/134a/404A

TITAN 4-Valve Test and Charging Manifold (°F and °C)Features: Forged aluminum alloy body makes this unit lightweight for handling ease with the durability and

reliability required for repeated use Fourth hose to enable connection to hi-/lo-sides, refrigerant tank and recovery unit or vacuum pump

for diagnostics, evacuation and charging without switching hoses 3/8" Vacuum port for use with larger hose to cut evacuation time by up to 33% Large, easy-to-read 3-1/8" steel case red and blue, 1% accuracy (Class 1) gauges Front access for easy field recalibration Double “O” ring piston for reliability and long service life Exclusive 100 mesh filter in-line on all flare fittings helps keep out particulate material and extend the

life of the seats Contoured easy-grip handles for positive control; color-coded for ready identification Sight glass to easily view refrigerant movement and condition during charging and recovery Optional protective gauge boots available Heavy duty hook won’t pull out Also available with 3-1/2" red and blue liquid-filled gauges Manifold and hose holder fittings 1/4"-3/8"-1/4"-1/4" unless otherwise identified Made in the USA


Part Number Gauge Hoses Description49967 Red/Blue 60” Plus II - RYB & 3/8” x 45° °F - with 60" PLUS II™ RYB and 3/8" x 45°, R/B gauges, psi,

R-22/404A/410A




Tools and Test InstrumentsRefrigerationRitchieOil Pump and InjectorsMax-Flow Deluxe Oil Pump

Features: The Max-Flow deluxe oil pump is a high capacity unit for quick charging. Remove oil for recovery and conversion Add oil to existing systems Pumps 3.8 oz. per stroke Fits all size oil containers Foot stand base provides support and leverage while pumping against the high pressures of a running

compressor Operating unit in reverse with adapter hose accessory removes oil from equipment quickly and efficiently Use with alkyl-benzene, ester-based, polyol ester, mineral and synthetic o ils Will pump against 250 psi pressure Made in the USA


Part Number Description77930 Max-Flow Deluxe Oil Pump

Reaming and DeburringTube Deburring Tool

Part Number Description60163 Deburring Tool for Fast Deburring, Rotate Blade




Tools and Test InstrumentsRefrigerationRitchieRefrigerant RecoveryRecoverXLT

Features: Single valve control for easy changeover from liquid to vapor to purge Constant Pressure Regulator (CPR) valve regulates refrigerant to the compressor, Eliminates the

need for the technician to throttle the suction valve Advanced 1/2 hp, 3425 rpm oil-less compressor with precision valves manufactured in an ISO-9001

facility Recovers refrigerant and shuts off when unit reaches 13" of vacuum. Unit will automatically restart if

system pressure rises Indicator signals “recovery complete” Quiet running with components nested to reduce vibration and noise. Oil-less compressor is

inherently quiet Controls and gauges inset for protection and angled for easy access and viewing Senses back pressure from tank and shuts off automatically at 517 psi for safety Reusable mesh particulate filter inserts into suction port for protection. Simple cleaning eliminates

replacement due to clogging ”On-the-fly” purge with simple turn of a knob to remove residual refrigerant and help prevent cross-

contamination High efficiency fan keeps air moving across condenser for cool running even in hot weather High strength HDPE case for lightweight and rugged use. Rounded corners help protect from nicks

and scrapes Single high pressure safety switch - external circuit breaker Includes three-year compressor warranty on domestic models Made in the USA Tested by UL to ARI 740-98 (ARI 740-95 for 95700 and 95765)


Part Number Capabilities Compressor Electrical Overfill Shut-Off Description95760 Vapor, liquid,

push/pull 1/2 hp, oil-less 115/60 Hz or 230/50

HzStandard on 95762 RecoverXLT Refrigerant Recovery Machine

115V/60 Hz

Replacement “Adjust-a-Valve” Opener

Part Number Description19302 “Adjust-a-Valve” Opener, 10 pak




Tools and Test InstrumentsRefrigerationRitchieSuperEvac Pumps and AccessoriesVacuum Pump Oil

Features: YELLOW JACKET vacuum pump oil is specially refined and formulated for extremely low vapor

pressure and high pump efficiency at all temperature conditions.


Part Number Boiling Point Color Odor Physical State Description93092 347C Water White Characteristic

Petroleum Clear and bright

liquid Quart of Vacuum Oil - 12 per case

Vacuum GaugesDigital Vacuum Gauge

Features: Unique patented thermal conductivity sensor automatically compensates for temperature Replaceable, cleanable, plug-in sensor handles 450 psi positive pressure Displays 7 different units of vacuum - microns, milliTorr, Torr, millimeters of mercury, mil libar,

kiloPascal and Pascal 12" coiled sensor cord stretches to 24" for easy reach, connectivity and readability of display Magnetized on back for secure, upright positioning on any magnetized surface Low battery indicator, Automatic shut-off after 20 minutes Calibration standards traceable to NIST, 14 oz. with battery Approximately 25 hours continuous battery life, Made in the USA


Part Number Accuracy Operating Temperature Description69086 +/- 20% 32° - 122°F Hand-Held Vacuum Gauge with Fabric Carry Pouch




Tools and Test InstrumentsRefrigerationRitchieVacuum PumpsBULLET 3, 5 & 7 CFM Vacuum Pumps

Features: Wide mouth oil reservoir port for easier, cleaner filling. Doubles as pump exhaust; threaded to attach

garden hose for exhausting to remote location Large oil sight glass for easy monitoring of oil level Large brass oil drain for easy access to fast oil changes Internal intake check valve prevents oil backup into the system during a power failure Intake filter screen keeps damaging particles from entering the pump Heavy-duty rotors and bearings, Heavy-duty steel handle for well-balanced carrying Tethered port caps stay with the pump Stable base; wide-stance metal with rubber overlay 24-month limited over-the-counter warranty, Made in USA


Part Number Dimensions FieldBlankoff

Motor Number Of Stages Oil Capacity Description

93600 16.25” x 6” x11.5”

25 microns 1/2” hp – 1725 rpm 2 Stage Rotary Vane 28 Oz. 7 CFM 115V/60 Hz single phase

SuperEvac 4, 6, 8 & 11 CFM PumpsFeatures: Isolation valve for oil changes without losing vacuum in the system Built-in vacuum indicator gauge Wide-mouth oil reservoir port for easier, cleaner filling. Doubles as pump exhaust—threaded to

attach garden hose for exhausting to remote location Large oil sight glass for easy monitoring of oil level Large brass oil drain for easy access to fast oil changes Gas ballast valve keeps oil cleaner, longer during evacuation of wet systems Internal intake check valve prevents oil backup into the system during a power failure Intake filter screen keeps damaging particles from entering the pump Heavy duty rotors and bearings Heavy duty steel handle with lift hook for well-balanced carrying Tethered port caps stay with the pump Metal with rubber overlay base for stability Made in the USA


Part Number Dimensions FieldBlankoff

Motor Number Of Stages Oil Capacity Description

93580 16.75" x 6" x11.5"

15 microns 1/2 hp - 1725 rpm 2 Stage Rotary Vane 32 Oz. 8 CFM 115V, 60 Hz Single Phase




Tools and Test InstrumentsRefrigerationRitchieWrenchesService Wrenches - Offset

Features: Knuckle saver design for convenience in tight areas. Square opening 1/4" and 3/16" at one end; 3/8" and 5/16" at other. Made in the USA.


Part Number Description60616 Off-set Service Wrench

Service Wrenches - StraightFeatures: Standard reversible ratchet wrench with square openings: 1/4" and 3/16" at one end; 3/8" and 5/16"

at other end. Made in the USA.


Part Number Description60613 Straight Service Wrench

Sheet MetalMalcoAwls, Scribers & DividersAdjustable Scriber

Features: Measure, mark and scribe trim lines on sheet metal in one easy operation. Set desired trim depth on scriber extension and tighten knob. The stop at the end of the scriber sleeve glides along edge of work as a 6 x 3/8” sheet metal screw

point scribes a clean, hard line. Adjustable from 1/4” to 12-1/2” (6.4 to 318 mm) depths in 1/8" (3.2 mm) graduations. Rotate the scriber extension and knob end to end for depths larger than 6-1/2”(165 mm). The use of a Zip-In sheet metal screw makes point replacement practica l and economical. Scrow point is protected when tool is closed. Pocket size tool is constructed of rust resistant nickel plated steel. Knob assembly with hardened steel bolt insert will not strip out.

http://malcoproducts.com/product/hvacr

Part Number Min & Max Adjustments Net Weight DescriptionA60 1/4” to 12-1/2” 10 Oz. Sheet Metal Adjustable Scriber




Tools and Test InstrumentsSheet MetalMalcoAwls, Scribers & DividersDividers

Features: Accurate and fast adjusting. Points are easily resharpened or replaced. Nickel plated steel body.


Part Number Length O/A Storage Length Net Weight Description18 11" 24" 7 Oz. Divider Max. Diameter Circle 32"

Scratch AwlsFeatures: Use to scribe lines on metal, plastic and a variety of other materials. Pierce holes in wood, plastic, leather, - even light gauge metal. Blades are high carbon, alloy tool steel fully polished to resist rust. Blade tapers to a fine point and may be resharpened many times. Easy-to-spot orange handles are shock and shatter resistant. Shallow fluted handles with large end bearing sur face provide a sure, comfortable grip. User has choice of large diameter or regular grip handles.


Part Number Blade Dia Blade Length Overall Length DescriptionAO 1/8" 3" 6-1/4" Scratch Awls - Regular GripA1 7/32" 3-1/2" 5-3/4" Scratch Awls - Large Grip

Duct Tools5-Blade Crimper - Redline

Features: Ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and

feel for the way you work. Easy one-hand-operation, including an easy open and close latch motion, always leaves a free

hand to steady work piece.


Part Number Throat Depth DescriptionC5R 1-5/8" 5-Blade Crimper - Redline




Tools and Test InstrumentsSheet MetalMalcoDuct ToolsDuct Stretchers

Features: The low profile, straight body is designed to go anywhere, even in the tightest quarters. Additional spacing holes allow wheels to be adjusted to span greater distances. Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole.


Part Number Length Net Weight DescriptionDS2 16" 12 Oz. Duct Stretcher - Offset

Hand Notcher - RedlineFeatures: Ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and




Part Number Throat Depth DescriptionN1R 13/16" Hand Notcher - Redline

Pipe & Duct HoldersFeatures: Two powerful clamps and four feet of 125 lb. tensile strength linked chain. Set holds duct in place, either between or under jo ists until it is properly secured. Also ideal for installing fiberglass duct, link chain will not puncture foil skin. Clamps and chain are nickel plated steel.


Part Number Length Tensile Strength Description2DH 4’ Chain 125 Lbs Pipe & Duct Holders, 1 Pair of Clamps and Chain

Snap Lock Punch - RedlineFeatures: Ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit and




Part Number Throat Depth DescriptionSL1R 3/8" Snap Lock Punch - Redline




Tools and Test InstrumentsSheet MetalMalcoDuct Tools - Fiberglass Flex DuctDuct Knives

Features: For cutting flexible fiberglass wool duct and ductboard. Double edge blades are ideal for blind cuts in "flex" duct. Ergonomic cushion grip features one serrated cutting edge and comes with a puncture-resistant

nylon sheath., Resharpenable, heavy-duty cutlery grade steel blades.


Part Number Length Net Weight DescriptionDK6S 6" 7 Oz. Cushioned Gripped Duct Knife - Serrated

Flex Duct CutterFeatures: Built-in wire cutter lets you finish the job you started with just one tool. Double edged blade cleanly pierces through outer skin and insulation. Cuts from either direction around entire circumference of duct. Fine honed blade is long lasting stainless steel., Wire cutter cuts hardened wire rib coil. Compound leverage, for easy wire cutting., Comfortable, non-slip vinyl gripped handles.


Part Number Blades / Wire Cutter Length Length Of Cut In Net Weight DescriptionFDC1 High Carbon Steel 11-7/8" 4 11 Oz. Flex Duct Cutter

Manual Cut-Off Tie Tool with GripFeatures: These rugged lever action tie tools feature a unique notched gripper. Comfortable handles reduce the pinch point area. Designed to work on standard 175 lb. ties as well as thinner 125 lb. ties.


Part Number Length Net Weight DescriptionTY46 6" 11 Oz. Manual Cut-Off Tie Tool with Grip

HammersClaw Hammers - Fiberglass Handled

Features: Black paint and polished finish with chamfered edges and beveled face. Fiberglass minimizes recoil and vinyl grip adds comfort.


HeadPart Number Claw Face Size Length Weight Nominal Length Description16CCF Curved 1" 5-1/4" 16 Oz. 13" Claw Hammers - Fiberglass Handled




Tools and Test InstrumentsSheet MetalMalcoHammersClaw Hammers - Leather Gripped

Features: One-piece forged, I-beam construction. Full polished head with beveled face. Leather Gripped One-Piece Steel.


HeadPart Number Claw Face Size Length Weight Nominal Length Description20SC Straight 1-3/16" 5-5/8" 20 Oz. 12-1/2" Claw Hammers - Leather Gripped One-Piece

Steel

Claw Hammers - Vinyl GrippedFeatures: One-piece forged, I-beam construction. Full polished head with beveled face. Comfortable, non-slip vinyl grip.


HeadPart Number Claw Face Size Length Weight Nominal Length Description16SCV Straight 1-1/16" 4-78" 16 Oz. 12-1/2" Claw Hammers - Vinyl Gripped One-Piece Steel

Dead Blow HammerFeatures: Non-Marring, Non-Sparking, Non-Recoiling. One-piece construction of weather-resistant urethane compound ensures long service life. Excellent for working copper, other soft metals and auto body panels. Steel shot inside head absorbs impact to prevent recoil. Flanged handle butt provides a more secure grip.


HeadPart Number Face Size Length Weight Nominal Length DescriptionDB1 1-1/4" 3-1/2" 17 Oz. 11" Dead Blow Hammer




Tools and Test InstrumentsSheet MetalMalcoHammersDuct Ripper

Features: Specially angled ground tip easily punctures and rips duct to the desired length starting hole. Hardened tip is ground on both sides to create 2 cutting edges for long, useful life. Cutting edges are aligned with shaft flats for large striking surfaces. Corrosion resistant blade, cushioned grip and a hang hole for storage complete this handy tool.


Part Number Overall Length Net Weight DescriptionCDR 9-1/2" 5 Oz. Duct Ripper

Sheet Metal Hammers - RivetingFeatures: One-piece forged, I-beam construction. Full-polished heads with beveled face and pein are corrosion resistant. Hammer sections are individually hardened and tempered for strength and resiliency.


HeadPart Number Face Size Length Weight Overall Length DescriptionRH4 3/4" 4-7/8" 12 Oz. 11" Riveting Hammer - Leather Gripped

Sheet Metal Hammers - SettingFeatures: One-piece forged, I-beam construction. Full-polished heads with beveled face and pein are corrosion resistant. Hammer sections are individually hardened and tempered for strength and resiliency.


HeadPart Number Face Size Length Weight Overall Length DescriptionSH3 7/8" 5-1/2" 18 Oz. 11-3/4" Setting Hammer - Leather GrippedSH3V 7/8" 5-1/2" 18 Oz. 11-3/4" Setting Hammer - Vinyl Gripped




Tools and Test InstrumentsSheet MetalMalcoHand SnipsAndy 14” Pattern Snip

Features: High carbon inset steel blades with sleek aluminum frames. Multiple handle openings to fit large or small hands. Large frame with roomy handle loops and cutting length. Straight shearing, mild curve cuts, and multiple layers of material.


Part Number Length Net Weight DescriptionM14N 14" 20 Oz. Andy 14” Pattern Snip

Capacities: Model Material Vinyl Aluminum Copper Stainless Steel 26 Gauge Galvanized Steel 24 Gauge Mild Steel 24 Gauge

M14N Inches (mm)

.055 (1.40) .035 (0.89) 023

(0.58) .018 (0.46) .028 (0.71) .024 (0.61)

Aviation Snips - AVs

Features: Aviation style steel metal snips for straight cuts and slightly curved cuts in either direction. Traditional design with forged steel jaws, torsion handle spring and side latch.


Part Number Cutting Application Grip Color Length Net Weight DescriptionAV1 Cuts Left Red 9-5/8" 14 Oz. Forged Steel Aviation Snip, Cuts Left, RedAV2 Cuts Right Green 9-5/8" 14 Oz. Forged Steel Aviation Snip, Cuts Right, GreenAV3 Cuts Straight, Left, and

RightYellow 9-7/8" 14 Oz. Forged Steel Aviation Snip, Cuts Straight, Left, and

Right, YellowCapacities:

Model Material Aluminum Copper Stainless Steel 20 Gauge Galvanized Steel 18 Gauge Mild Steel 18 GaugeAV1, AV2,

AV3 Inches (mm) 0.62 (1.57) 0.54 (1.37) 0.36 (0.91) 0.52 (1.32) 0.48 (1.22)




Tools and Test InstrumentsSheet MetalMalcoHand SnipsAviation Snips - Left Cutting Vertical

Features: Cuts in tight spaces and overhead., A serrated edge on the upper jaw and compound head-to-handle

linkage provide powerful,non-slip leverage for cutting. Handles feature non-slip, cushion inserts, torsion-spring action and a squeeze-open, side operated

latch. Rust-resistant polished forged steel jaws and black oxide finished handle stampings promote long

service life.


Part Number Cutting Application Overall Length Net Weight DescriptionAV8 24-ga. Cold Rolled Steel

/ 28-ga Stainless Steel8-3/4" 16 Oz. Left-Cutting Vertical Aviation Snip

Aviation Snips - Max2000Features: Max2000 Aviation Snips now feature all-new, molded thermoplastic grips. These easy-to-spot, solid color coded grips are permanently fitted over full length steel handle shafts

and offer strength, comfort and sure handling. A narrower grip opening accommodates large or small hands to maximize the powerful leverage of

compound handle-to-head linkage. A new ambidextrous, one-hand-operation latch is another welcome handle change to all Max2000

snips and features an ingenious all-metal design that will not loosen or hang up with repetitive use. Original Max2000 blade designs remain unchanged and retain the same generous cutting lengths. Max2000 hardened alloy steel blades with precision ground cutting edges ensure a minimal force

cut and maximum service life. Sleek head and handle styling offer superior material flow and maximum maneuverability.


Part Number Cutting Application Grip Color Overall Length Net Weight DescriptionM2001 Cuts Left Red 10" 14 Oz. Max2000 Aviation Snips, Cuts Left, RedM2002 Cuts Right Green 10" 14 Oz. Max2000 Aviation Snips, Cuts Right, Green

Capacities: Model Material Aluminum Copper Stainless Steel 20 Gauge Galvanized Steel 18 Gauge Mild Steel 18 Gauge

M2001,M2002 Inches (mm) 0.62 (1.57) 0.54 (1.37) 0.38 (0.97) 0.54 (1.37) 0.48 (1.22)




Tools and Test InstrumentsSheet MetalMalcoHand SnipsAviation Snips - Right Cutting Vertical

Features: Cuts in tight spaces and overhead., A serrated edge on the upper jaw and compound head-to-handle

linkage provide powerful,non-slip leverage for cutting. Handles feature non-slip, cushion inserts, torsion-spring action and a squeeze-open, side operated

latch. Rust-resistant polished forged steel jaws and black oxide finished handle stampings promote long

service life.


Part Number Cutting Application Overall Length Net Weight DescriptionAV9 24-ga. Cold Rolled Steel

/ 28-ga. Stainless Steel8-3/4" 16 Oz. Right-Cutting Vertical Aviation Snip

Aviation Snips: Bulldog - Max2000Features: A narrower grip opening accommodates large or small hands without sacrificing generous

Max2000 cutting length. All-new, ambidextrous, one-hand-operation metal latch is accessible from top or side and

features an ingenious simple design that will not loosen or hang up with repetitive use. A fast adjusting, long life pivot bolt, with nylon locking nut and pressure washer, holds

desired adjustment even after repetitive use in heavy gauge metal. The Max2000 Bulldog Snip features shorter blades with a serrated lower jaw for controlled

notching and trimming out to the blade tip in layered sheet metals and metal seams.


Part Number Cutting Application Grip Color Overall Length Net Weight DescriptionM2005 Notching and

TrimmingRed 10" 13 Oz. Max2000 Bulldog Snip, Notching and

Trimming, RedCapacities:

Model Material Aluminum Copper Stainless Steel 20 Gauge Galvanized Steel 18 Gauge Mild Steel 18 GaugeM2001,M2002 Inches (mm) 0.62 (1.57) 0.54 (1.37) 0.38 (0.97) 0.54 (1.37) 0.48 (1.22)




Tools and Test InstrumentsSheet MetalMalcoHand SnipsAviation Snips: Offset - Max2000

Features: A narrower grip opening accommodates large or small hands without sacrificing generous Max2000

cutting length. All-new, ambidextrous, one-hand-operation metal latch is accessible from top or side and features an

ingenious simple design that will not loosen or hang up with repetitive use. A fast adjusting, long life pivot bolt, with nylon locking nut and pressure washer, holds desired

adjustment even after repetitive use in heavy gauge metal. Versatile Max2000 Offset Right and Left Aviation Snips feature a serrated upper jaw of hardened

alloy steel and a forged steel lower jaw to produce a strong, sharply defined cutting edge for superior offset maneuverability and cutting performance.


Part Number Grip Color Net Weight Overall Length DescriptionM2006 Red 16 Oz. 10" Red Max2000 Offset Aviation Snip, Cuts Sharp Left

Angles, Straight Lines & 5” Diameter CirclesM2007 Green 16 Oz. 10" Green Max2000 Offset Aviation Snip, Cuts Sharp Right

Angles, Straight Lines & 5” Diameter CirclesCapacities:

Model Material Aluminum Copper Stainless Steel 20 Gauge Galvanized Steel 18 Gauge Mild Steel 18 GaugeM2001,M2002 Inches (mm) 0.62 (1.57) 0.54 (1.37) 0.38 (0.97) 0.54 (1.37) 0.48 (1.22)

Forged Steel Snips - Bulldog PatternFeatures: Big, powerful snip for straight cuts and notches.


Part Number Length Net Weight DescriptionM15 16-1/2" 3.89 lbs. Bulldog Pattern Snip

Hex KeysFolding Sets

Features: Hex corners of keys are sharp and clean. Finish is black oxide. Smooth zinc plated case can be used as handle for extra leverage. Flat spring holds keys in any work position. Hex Sizes: . 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 in.


Part Number Handle Length No Of Keys DescriptionW29 4-1/4" 9 Deluxe Pocket Key Set




Tools and Test InstrumentsSheet MetalMalcoHex KeysL Wrench Sets

Features: Easy socket access at angles up to 25 degree off-axis. Wrench sets store in handy reusable case. Two tools in one, standard hex end for maximum torque. Ball end for angles. Tough alloy steel. Black oxide finish. In reusable vinyl pouch.


Part Number Length DescriptionW6 6" L-Hex Key 6", 9 Piece SetW12 12" L-Hex Key 12", 7 Piece Set

Knee PadsHardcap Knee Pads

Features: Foam padded to hug the knees and covered with tough DuPont CORDURA. Offers superior protection and body weight distribution so user can swivel and slide freely on working

surface. Thicker foam padding and adjustable closures provide added comfort and mobility.


Part Number Material DescriptionTPKP2 DuPont Cordura Hardcap Knee Pads

Softcap Knee PadsFeatures: Foam padded to hug the knees and covered with tough DuPont CORDURA. Non-slip surface prevents sliding. Long thick cap improves weight distribution, and wider e lastic straps hold pads more securely. Thicker contoured foam and adjustable closures provide added comfort and mobility. Natural color cap is non-marring.


Part Number Material DescriptionTPKP3 DuPont Cordura Softcap Knee Pads




Tools and Test InstrumentsSheet MetalMalcoKnives & BladesQuick Open Knife

Features: "No tools" blade change is fast and easy with just a turn of the knob. Extra blades store in handle. Retractable blade advances to 3 locked cutting positions with aid of thumb button. Heavy duty, die-cast knife halves feature “integrated hinge” to eliminate lost or dropped parts. Contoured knife shape features “ergonomic safety gr ip”. One blade supplied in retracting mechanism.


Part Number Description9PK Quick Open Utility Knife

Top Button Action KnifeFeatures: Die-cast heavy duty model comes complete with 3 double point blades. Safe, easy to operate, thumb action mechanism on top facilitates three cutting positions - fully

extended, partially extended for carton opening and intermediate.


Part Number Description4PK 3 Position Utility Knife Top Button

Measuring - Chalk Lines & SquaresMagnetic Tip Measuring Tapes

Features: Malco’s “Magnetic Tip” Tape Measure is ideal for every ferrous metalworking project. Use it for HVAC ductwork installations, ceiling grid appl ications, metal stud framing and more. A powerful magnet and self-supporting 1” wide blade makes 1-person measurements and measuring elevations an easy task. The magnetic tip and big standout blade can even be used as a pick-up tool. A double riveted tip connection, abrasion-resistant, nylon coated blade and rubber-clad housing and blade stop assure lasting performance.


Part Number Size Net Weight DescriptionT416M 1” x 16’ 10 Oz. Magnetic Tip Tape Measure - 1” x 16’T425M 1” x 25’ 14 Oz. Magnetic Tip Tape Measure - 1” x 25’T430M 1” x 30’ 17 Oz. Magnetic Tip Tape Measure - 1” x 30’




Tools and Test InstrumentsSheet MetalMalcoMeasuring - LevelsTorpedo Level

Features: Duplex milled aluminum frame with “cycolac” end plates is lightweight and withstands shock or abuse. Precision cast parallel edges will not scratch work surface. Three large vials - plumb, level and 45°. White vial holders and top read feature facilitate quick, easy reading. Grooved working edge designed for use on pipe and conduit.


Part Number Length Number Of Vials DescriptionL9M 9" 3 Top Reading Torpedo Level - Magnetic Base

Measuring - Tape MeasuresNon-Magnetic Tape Measures

Features: Non Magnetic 1” Tape Measures Double Riveted Tip Connection Rubber-Clad Housing


Part Number Size Net Weight DescriptionCT425 1” x 25’ 13 Oz. 1” x 25’ Tape MeasureCT430 1” x 30’ 16 Oz. 1” x 30’ Tape Measure

Nut DriversCONNEXT1 Quick Change Handles

Features: Clear, molded acetate CONNEXT handles are shock-proof, shatter-proof and fluted to fit any hand. Handles come in full grip or stubby sizes and are equipped with a quick-connect holdermechanism to

accept any 1/4-inch shank chuck driver including Malco Magnetic Hex Chuck Drivers, Hollow Hex Chuck Drivers and Phillips Chuck Drivers.


Grip HolderPart Number Dia Length Dia Length Opening Overall Length DescriptionCONNEXT1 1-1/8" 4-1/8" 11/16" 1-1/8" 1/4" Hex 5-1/4" CONNEXT Quick-Change Handle, Overall Length 5-1/4"CONNEXT2 1-1/8" 1-7/8" 11/16" 1-1/8" 1/4" Hex 3-1/8" CONNEXT Quick-Change Handle, Overall Length 3-1/8"CONNEXT3 1-1/8" 4-1/8" 5/8" 1-5/8 1/4" Hex 6-3/8" CONNEXT Quick-Change Handle, Overall Length 6-3/8"




Tools and Test InstrumentsSheet MetalMalcoPower Assisted Cutters / Shears"Gold Standard" Malco Hole Cutters

Features: Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4" (6.4

mm). Lightweight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20-gauge (1.02 mm) galvanized steel.

A compact model HC1 Hole Cutter is adjustable for making 2 to 12" (51 to 305 mm) diameter holes. A combination English/Metric diameter gauge is included on the adjustable pivot slide for model.


Part Number Capacity Hole Dia Net Weight DescriptionHG1 20 ga. 2"-12" 16 Oz. "Gold Standard" Hole Cutter - 2"-12" Diameter

Capacities: Model Material Aluminum Copper Stainless Steel 22 Gauge Galvanized Steel 20 Gauge Mild Steel 20 Gauge HC1 Inches (mm) .054 (1.37) .042 (1.07) .030 (0.76) .040 (1.02) .036 (0.91)

TurboShearFeatures: Use with minimum 1200 RPM 3/8" cordless or corded drill Designed for 20-gauge steel and other common sheet metals including auto body panels Easily cuts thick plastic bumper panels, Two hand operation with hand peg Cuts Straight and to the Left including round and square auto body patches Replacement Blades: Order No. TS1RB, TSDC Drill Clamp (optional)


Part Number Net Weight DescriptionTS1 26 Oz. TurboShear

Model Galvanized Steel 20 Gauge Mild Steel 18 Gauge Capacities: TS1 .040 (1.02) .048 (1.22)

Power DriversCONNEXT Extra Long Chuck Drivers

Features: Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks,

meet on-the-job demands for performance and service life whether installed on an electric power drill or used with a CONNEXT Quick Change Handle.

Hex Driver sizes are color coded for easy identification and are available in shorts, longs and extra long sizes.


Part Number ColorCode

HexOpening

InsertDia

NoseDia

OverallLength

Description

MSHML14 Red 1/4" 1/4" 7/16" 4" CONNEXT Extra Long Magnetic Hex Chuck Driver, Red, 5/16"MSHML516 Yellow 5/16" 1/4" 1/2" 4" CONNEXT Extra Long Magnetic Hex Chuck Driver, Yellow, 5/16", Length 4"MSHXL38 Blue 3/8" 1/4" 9/16" 6" CONNEXT Extra Long Magnetic Hex Chuck Driver, Blue, 3/8"MSHXL516 Yellow 5/16" 1/4" 1/2" 6" CONNEXT Extra Long Magnetic Hex Chuck Driver, Yellow, 5/16", Length 6"MSHXL516T (50 Bulk Tub) Yellow 5/16" 1/4" 1/2" 6" CONNEXT Extra Long Magnetic Hex Chuck Driver, Yellow, 5/16", 50 Bulk

Tub




Tools and Test InstrumentsSheet MetalMalcoPower DriversCONNEXT Hollow Hex Chuck Drivers

Features: Malco precision fit and hardened Hollow Hex Chuck Drivers, with 1/4-inch power insert shanks,


Hex Driver sizes are color coded for easy identification and are available in 3-inch and big 6-inch lengths.


Part Number ColorCode

Depth HexOpening

Insert Dia Nose Dia OverallLength

Description

HD1 Red 1-1/2" 1/4" 1/4" 7/16" 3" Hollow Hex Chuck Driver, 1-1/2" Depth, RedHD2 Red 3" 1/4" 1/4" 7/16" 6" Hollow Hex Chuck Driver, 3" Depth, RedHD3 Yellow 1-1/2" 5/16" 1/4" 1/2" 3" Hollow Hex Chuck Driver, 1-1/2" Depth, YellowHD4 Yellow 3" 5/16" 1/4" 1/2" 6" Hollow Hex Chuck Driver, 3" Depth, YellowHD5 Blue 1-1/2" 3/8" 1/4" 9/16" 3" Hollow Hex Chuck Driver, 1-1/2" Depth, BlueHD6 Blue 3" 3/8" 1/4" 9/16" 6" Hollow Hex Chuck Driver, 3" Depth, Blue

CONNEXT Long Chuck DriversFeatures: Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks,




Part Number Color Code HexOpening


Description

MSHL14 Red 1/4" 1/4" 7/16" 2-9/16" CONNEXT Long Magnetic Hex Chuck Driver, Red, 1/4"MSHL14T (50 Bulk Tub) Red 1/4" 1/4" 7/16" 2-9/16" CONNEXT Long Magnetic Hex Chuck Driver, Red, 1/4", 50

Bulk TubMSHL38 Blue 3/8" 1/4" 9/16" 2-9/16" CONNEXT Long Magnetic Hex Chuck Driver, Blue, 3/8"MSHL516 Yellow 5/16" 1/4" 1/2" 2-9/16" CONNEXT Long Magnetic Hex Chuck Driver, Yellow, 5/16"MSHL516T (50 Bulk Tub) Yellow 5/16" 1/4" 1/2" 2-9/16" CONNEXT Long Magnetic Hex Chuck Driver, Yellow, 5/16",

50 Bulk TubMSHL716 Brown 7/16" 1/4" 11/16" 2-9/16" CONNEXT Long Magnetic Hex Chuck Driver, Brown, 7/16"




Tools and Test InstrumentsSheet MetalMalcoPower DriversCONNEXT Short Chuck Drivers

Features: Malco precision fit and hardened Magnetic Hex Chuck Drivers, with 1/4-inch power insert shanks,




Part Number Color Code HexOpening


Description

MSH 14 Red 1/4" 1/4" 7/16" 1-3/4" CONNEXT Short Magnetic Hex Chuck Driver, Red, 1/4"MSH14T (100 Bulk Tub) Red 1/4" 1/4" 7/16" 1-3/4" CONNEXT Short Magnetic Hex Chuck Driver, Red, 1/4", 100

Bulk TubMSH38 Blue 3/8" 1/4" 9/16" 1-3/4" CONNEXT Short Magnetic Hex Chuck Driver, Blue, 3/8"MSH516 Yellow 5/16" 1/4" 1/2" 1-3/4" CONNEXT Short Magnetic Hex Chuck Driver, Yellow, 5/16"MSH516T (100 Bulk Tub) Yellow 5/16" 1/4" 1/2" 1-3/4" CONNEXT Short Magnetic Hex Chuck Driver, Yellow, 5/16",

100 Bulk Tub

Power Driver ExtensionsFeatures: Extensions fit any electric power drill or 1/4-inch power drive holder. Ball bearing on extensions’ holders provides a positive lock on 1/4-inch hex shank chuck drivers and

bits. Tempered steel with black finish.


Part Number Hex Opening Nose Dia Overall Length DescriptionBHE6 1/4" 9/16" 6" 6" Power Bit ExtensionBHE10 1/4" 9/16" 10" 10" Power Bit Extension

Screwdrivers6 in 1 Reversible

Features: Combination bits change to drive 6 different head styles or sizes. 1/4" & 5/16" Hex opening nut driver with 3/16" & 9/32" slotted head bit and #1 & #2 phil lips head bit. Shank firmly locks into handle barrel. Driver bits are individual protected with black oxide. Shank is chrome plated to protect against rust. Large comfortable barrel shaped cushion grip.


Part Number DescriptionRD6 Reversible Driver with 2 Combination Bits and 2 Hex Barrel Openings




Tools and Test InstrumentsSheet MetalMalcoSeamers, Folding Tools & BrakeFolding Tools: Fixed Length and Depth

Features: Folding Tool seams are formed from two steel halves, permanently joined together. Handy sight holes assure proper depth alignment. 12F - 12" Folding Tool with 3/8" & 1" depths. 24F - 24" Folding Tool with 3/8" & 1" depths. Extra long fold ing tool may also be used as a mini-

brake by roofing and siding applications.


Part Number Folding Depths Net Weight Description12F 3/8", 1" 20 Oz. 12" Folding Tool24F 3/8", 1" 42 Oz. 24" Folding Tool

Hand Seamers with Forged Steel Jaws - RedlineFeatures: Ergonomic handle contours with an over-molded, non-slip handle insert assures a natural fit. Easy one-hand-operation, including an easy open and close latch motion, always leaves a free hand

to steady work piece.


Part Number Jaw Depth Jaw Width Length Net Weight DescriptionS2R 1-1/4" 3-1/4" 8" 24 Oz. 3-1/4" Hand Seamers with Forged Steel Jaws - RedlineS6R 1-1/4" 6" 8" 30 Oz. 6" Hand Seamers with Forged Steel Jaws - Redline

Capacities: Model Material Aluminum Copper Stainless Steel 26 Gauge Galvanized Steel 24 Gauge Mild Steel 24 Gauge

S2R/S6R Inches (mm) 0.35 (0.89) 0.23 (0.58) 0.18 (0.46) 0.28 (0.71) 0.24 (0.61)




Tools and Test InstrumentsSheet MetalMalcoTool KitsHVAC Deluxe Starter Kit - REDLINE

Features: 30 Tools and FREE bags of Zip-in and Bit-Tip Screws kitted in a FREE No. TB1 Soft-Sided Tool Bag

17” x 8” x 8” Kit Includes: C5R REDLINE Pipe Crimper – 5 Blade SL1R REDLINE Snap Lock Punch N1R REDLINE Hand Notcher S2R REDLINE Hand Seamer 12F Folding Tool, 18 Divider M2001 Aviation Snip - left cut M2002 Aviation Snip - right cut M2005 Bulldog Aviation Snip M14N 14” (362 mm) Aluminum Handled Pattern

Snip, K56 12-16 Screwdriver P44C No. 2 Phillips Cushion Grip Driver AO 1/8” (6.35 mm) Scratch Awl A1 7/32” (5.54 mm) Scratch Awl SH3 Setting Hammer

T416M 1” x 16’ Magnetic Tape Measure W29 Hex Key Set DB1 Dead Blow hammer DS2 Offset Duct Stretcher MSH1/4 Magnetic Hex Chuck Driver MSH5/16 Magnetic Hex Chuck Driver HHD1S 1/4” Magnetic Hex Driver HHD2S 5/16” Magnetic Hex Driver L9M Torpedo Level TY4G Tie Tool- Standard Grip TS1 TurboShear, HC1 Hole Cutter 4MC24 Recip Blade 6L 24T HW8x1/2ZG Zip-ins 100 pack FREE BT143X Bit-Tips 100 pack FREE


Part Number DescriptionDSKR HVAC Deluxe Starter Kit - REDLINE

HVAC Starter Kit - REDLINEFeatures: 16 Tools and FREE bags of Zip-in and Bit-Tip Screws kitted in a FREE No. TB1 Soft-Sided Tool Bag 17” x 8” x 8” Kit Includes: C5R REDLINE Pipe Crimper – 5 Blade SL1R REDLINE Snap Lock Punch N1R REDLINE Hand Notcher S2R REDLINE Hand Seamer 12F Folding Tool 18 Divider M2001 Aviation Snip - left cut M2002 Aviation Snip - right cut

M14N 14” (362 mm) Aluminum Handled Pattern

Snip A1 7/32” (5.54 mm) Scratch Awl SH3 Setting Hammer DS2 Offset Duct Stretcher TS1 TurboShear, HC1 Hole Cutter HW8x1/2ZG Zip-ins 100 pack FREE BT143X Bit-Tips 100 pack FREE


Part Number DescriptionSTKMR HVAC Starter Kit - REDLINE




Tools and Test InstrumentsSheet MetalMalcoTool KitsTote Tray

Features: These heavy duty, crush proof tote trays are great for carrying hand tools and fasteners to the job site. Rust proof polypropylene body material is long wearing, lightweight and portable. Three roomy compartments to accommodate all the tools you need. Comfortable hand grip rolls to outside - will not bit into palm of hand.


Part Number Nominal Dimensions (LWH) Net Weight Description1660 15" x 10" x 4-1/2" 1.75 Oz. Tote Tray - 15" L x 10" W x 4-1/2" H

WrenchesHex Key Wrench Inserts

Features: 5/16" & 3/16" Hex Key Wrench Inserts (optional)1/4” square drive shanks fit Malco RRW3 and RRW4

Ratchet Wrenches Facilitates easy ratcheting action for servicing hard to access valves common in air conditioningand

refrigeration condensing units.


Part Number Hex Key Dia Overall Length DescriptionRRW316 3/16" 1-5/8" 3/16" Hex Key Ratchet Wrench InsertRRW516 5/16" 1-5/8" 5/16" Hex Key Ratchet Wrench Insert

Refrigeration Ratchet WrenchesFeatures: For installing or servicing heating, air conditioning or refrigeration units.


Part Number Hex Key Dia DescriptionRRW4 1/2" & 9/16" Refrigeration Ratchet Wrench

Refrigeration Ratchet Wrenches - OffsetFeatures: For installing or servicing heating, air conditioning or refrigeration units.


Part Number DescriptionRRW5 Refrigeration Ratchet Wrench - Offset




Tools and Test InstrumentsToolsIrwinLocking ClampsFast Release Locking C-Clamps with Regular Tips

Features: Fast Release is 2x easier to open, has a no-trigger release, and offers one hand operation Wide-opening jaws provide greater versatility in clamping a variety of shapes Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use

http://www.irwin.com

Part Number Size Jaw Opening Description17T 6" 54mm 6" Fast Release Locking C-Clamps with Regular Tips, 2-1/8" Jaw Capacity

Masonry Drill BitsMulti Material Drill Bits - Jobber Length

IRWIN Multi-Material drill bits drill through just about any type of material out there – brick, block,tile, metal, wood, plastic and marble – they’ll even drill through multiple materials at the same time. These versatile bits are designed specifically for rotary drill ing, but are tough enough to be used with hammer drills. Features: Carbide tip has a unique diamond-ground, four-facet design with sharper cutting edges for centered

starts with no walking, fast drilling, and excellent hole quality in a variety of materials. Double-milled flute ensures fast, efficient removal of dri lling dust and debris to increase speed and

prevent clogging. Compatible with all standard 1/2" and 3/8" chuck drills.


Part Number Flute Length Hole Sizes Overall Length Description4935105 2" 1/8" 3" 1/8" x 3" Jobber Length Multi Material Masonry Drill Bits4935107 2-3/4" 3/16" 3-3/4" 3/16" x 3-3/4" Jobber Length Multi Material Masonry Drill Bits4935108 3" 1/4" 4" 1/4" x 4" Jobber Length Multi Material Masonry Drill Bits4935109 3-3/4" 5/16" 4-3/4" 5/16" x 4-3/4" Jobber Length Multi Material Masonry Drill Bits

NutsettersLobular Design Nutsetters

Features: Lobular design reduces stripping damage by driving the fastener on the sides instead of forcing the

corners to turn, For use with sheet metal screws and other hexagonal head fasteners Provides more clearance on the corners of the fastener where paint build-up can occur


Part Number Size Overall Length Packaging Description3547721C 7/16" 1-7/8" 1 7/16" Magnetic Lobular Design Nutsetters, 1-Pack3548121C 1/4" 2-9/16" 1 1/4" Magnetic Lobular Design Nutsetters, 1-Pack3548321C 5/16" 2-9/16" 1 5/16" Magnetic Lobular Design Nutsetters, 1-Pack3548521C 3/8" 2-9/16" 1 3/8" Magnetic Lobular Design Nutsetters, 1-Pack




Tools and Test InstrumentsToolsIrwinPliersCutting Pliers - Vise Grip

Features: Durable nickel chromium steel construction ProTouch grips provide extra comfort and reduces hand fatigue Induction hardened cutting edge stays sharper, longer Meets or exceeds ANSI specifications Lifetime Guarantee Wire Cutter No Angled headed No Adjustment Screw


JawPart Number Size Size Thickness Width Description2078308 8" 7/8" 13/32" 1-1/8" 8" Diagonal Cutting Pliers, ProTouch Grip Type

Fast Release Curved Jaw Locking PliersFeatures: Self-energizing lower jaw provides 3X more gripping power than traditional locking pliers, with no

slipping or stripping Provides maximum torque without requiring heavy input pressure – jaw mechanism naturally grips

tighter as more torque is applied to the tool One-handed, trigger less release is 2X easier to open than traditional locking pliers Anti-pinch, non-slip ProTouch Grips provide comfort, control, and less hand fatigue Curved jaw puts tremendous pressure on four points of any style nut or bolt head, making it

perfect for any application that requires maximum torque Constructed of high-grade heat-treated alloy steel for maximum toughness and durability Hardened teeth are designed to grip from any angle Hex key adjusting screw tightens to adjust pressure and draw materials together and provides a

controlled , release Backed by the IRWIN VISE-GRIP Lifetime Guarantee *vs. traditional locking pliers


Part Number Size Jaw Opening Description11T 10" 48mm 10" Fast Release Curved Jaw Locking Pliers, 1-7/8" Jaw Capacity

Insulated Linemans PliersFeatures: Securely grips and cuts work pieces ProTouch grips provide maximum comfort and reduced hand fatigue Rated for 1000V and meet ASTM, IEC, VDE and DIN specifications Red & Yellow handles denotes international color for safety Lifetime Guarantee


Part Number Dimensions Description10507529NA 12" x 4.5" x 1.7" 8-1/2" Insulated Lineman’s Pliers




Tools and Test InstrumentsToolsIrwinPliersLinemans Pliers - Vise Grip

Features: Durable nickel chromium steel construction ProTouch grips provide extra comfort and reduces hand fatigue Induction hardened cutting edge stays sharper, longer Machined jaws for maximum gripping strength Meets or exceeds ANSI specifications Wire Cutter Wire Stripper Fish Tape Puller Crimper


Jaw Part Number Size Size Thickness Width Description1773614 9.5" 1-9/16" 5/8" 1-1/4" 9.5" Linesman Pliers with Wire Stripper, Crimper, Fish Tape Puller

Wire Strippers/CuttersWire Stripper / Cutter - Vise Grip

Features: 10-20 AWG selection dial adjusts for stripping wire of varying gauges Textured grips reduce hand slippage Wire Cutter


JawPart Number Size Size Thickness Width Description2078316 6" 1-2/3" 1/10" 1-1/4" 6" Wire Stripper / Cutter, 10-24 AWG Wire Gauge

WrenchesAdjustable Wrenches

Features: Durable chrome vanadium construction ProTouch grips provide extra comfort and reduces hand fatigue English and metric scales Extra wide capacity Hang hole for easy wall storage Meets or exceeds ANSI specifications


Part Number Size Extra Wide Jaw Capacity Description2078606 6" 1" 6" Adjustable Wrench, ProTouch Grip Handle2078608 10" 1-1/4" 10" Adjustable Wrench, ProTouch Grip Handle2078610 8" 1-1/8" 8" Adjustable Wrench, ProTouch Grip Handle




Tools and Test InstrumentsToolsKlein Levels and Measuring ToolsRare Earth Magnet Torpedo Lighted Electricians Level

Features: Strong, extruded aluminum frame features a convenient built-in hang hole Top-read level window simplifies viewing in tight areas Handy V-grooved edge for pipe and conduit work Precision edges for accurate readings, Large, highly visible vials - plumb , level and 45 degree Lights up for maximum visibility! 10-minute auto shut-off saves battery life (includes 2 AAA batteries) Water and impact resistant, Laser-etched rule and markings Comes with powerful Rare Earth Magnets for hands-free work, Fits easily into back pocket


Part Number Overall Length Description9330RE New! 9" Rare Earth Magnet Torpedo Lighted Electrician’s Level - 9"

Combination Wire-Stripping and Cutting ToolsLong-Nose Multi-Purpose Tool

Features: Easily cuts and strips wire, Narrow, serrated plier nose to pull, loop and bend wire Long, curved cutting blade Cutters and strippers are in front of the pivot for maximum ease-of-use in reaching into tight places Crimps insulated and non-insulated terminals and 7 to 8 mm ignition terminals Cleanly shears bolts, Plastic-covered cushioned handles for comfort


Part Number Bolt Size Handle Color Overall Length Description1010 4-40, 5-40, 6-32, 8-32, 10-32, 10-24 Blue 8-1/4" Long-Nose Multi-Purpose Tool

Crimping/Cutting ToolsCrimping/Cutting Tools - Non-Insulated/Insulated Connectors

Features: Accommodates wire from No 10 to 22 AWG, Specia lly hardened wire cutter in nose Tapered nose design for working in confined spaces Crimping die marked for insulated and non-insulated solderless terminals and connectors Plastic-dipped, cushioned handles for comfort Hot-riveted joint for smooth action and no handle wobble


Part Number Crimps Handle Color Overall Length Description1005 10-22 AWG Red 9-3/4" Crimping/Cutting Tool - Non-Insulated/Insulated Connectors




Tools and Test InstrumentsToolsKleinCushion-Grip Nut DriversMagnetic Tip Nut Driver - Hollow Shank

Features: Full hollow shafts facilitate work on stacked circuit boards or other long bolt applications Internal flanges provide solid, twist-resistant shaft anchor Premium chrome plated for smooth feel and corrosion resistance Meets or exceeds applicable ASME / ANSI specifications Handle end is also color coded for easy identification Cushion-Grip handle allows for greater torque and comfort Patented Tip-Ident quickly identifies nut driver and size Hollow shaft design with Rare Earth magnetic tip Hollow shaft facilitates work on bolt applications Cushion-Grip handle allows for greater torque and comfort Handle end is color-coded for easy identification Internal flanges provide solid, twist-resistant shank anchor Chrome-plated shaft helps prevent corrosion

http://www.service.kleintoo ls.com/Tool/PRD/Catalog/

Part Number Color Code Hex Size Overall Length Description646-5/16M Yellow 5/16" 9-3/4" 5/16" Magnetic Tip Nut Driver - 6" Hollow Shank646-1/4M Red 1/4" 9-3/4" 1/4" Magnetic Tip Nut Driver - 6" Hollow-Shaft

Magnetic Tip Nut Driver Set - 1-1/2" Hollow ShanksFeatures: Hollow shaft design with Rare Earth magnetic tip Hollow shaft facilitates work on bolt applications Cushion-Grip handle allows for greater torque and comfort Handle end is color coded for easy identification Internal flanges provide solid, twist-resistant shaft anchor Chrome-plated shaft helps prevent corrosion


Part Number Color Code Hex Size Overall Length Description610M Red (610-1/4M) & Yellow

(610-5/16M) 1/4" & 5/16 3-1/2" 2-Piece Hollow-Shaft Magnetic Tip Cushion-Grip

Stubby Nut Driver Set - 1-1/2" Shafts

Magnetic Tip Nut Driver Set - 6" Hollow ShanksFeatures: Hollow shaft design with Rare Earth magnetic tip Hollow shaft facilitates work on bolt applications Cushion-Grip handle allows for greater torque and comfort Handle end is color-coded for easy identification Internal flanges provide solid, twist-resistant shank anchor Chrome-plated shaft helps prevent corrosion


Part Number Color Code Hex Size Overall Length Description646M Red (646-1/4M) & Yellow

(646-5/16M) 1/4" & 5/16" 9-3/4" 2-Piece Magnetic Tip Cushion-Grip Nut Driver Set -

6" Hollow Shanks




Tools and Test InstrumentsToolsKleinCushion-Grip Screwdrivers11-In-1 Screwdriver/Nut Driver - Schrader Valve Core Tool

Features: Cushion-Grip handle for greater torque and comfort Premium chrome-plated for smooth feel and corrosion resistance Internal flanges inside handle provide solid, twist-resistant blade anchor Special heat-treated shafts, Precision-machined tip for exact fit Meets or exceeds applicable ASME / ANSI specifications Patented Tip-Ident quickly identifies the screwdriver type and tip orientation Versatile 11-in-1 tool for the professional Includes unique style bit for installation/removal of common TR-4 Schrader valves and aggressive

thread extractor tip for backing out broken cores, Great for HVAC and other industrial applications Blast finish bit tips provide a firm hold and reduce cam out Contains: 3/16" and 1/4" slotted, #1 and #2 Phillips, 1/4", 5/16" and 3/8" nut driver, #1 and #2 square, core removal / installation, core extractor


Part Number Weight Description32527 .500 Lbs. 11-in-1 Screwdriver/Nut Driver with Schrader Valve Removal/ Installation Bit

4-Piece Mini Cushion-Grip Screwdriver SetFeatures: Mini Cushion-Grip handles for superior comfort and grip, Patented Tip-Ident quickly identifies the type of screwdriver and tip orientation Precision tips for an exact fit and rigorous applications, Premium chrome-plated shafts for corrosion

resistance


Part Number Description85484 4-Piece Mini Cushion-Grip Screwdriver Set, Set Contains: 604-3 Phillips-tip, 606-2 Keystone-tip, 607-3

cabinet-tip, and 608-3 Cabinet-tip

Cabinet-Tip Screwdriver - Round-ShankFeatures: Cushion-Grip handle for greater torque and comfort Premium chrome-plated for smooth feel and corrosion resistance Internal flanges inside handle provide solid, twist-resistant blade anchor Special heat-treated shafts, Precision-machined tip for exact fit Meets or exceeds applicable ASME / ANSI specifications Patented Tip-Ident quickly identifies the screwdriver type and tip orientation Narrow cabinet tip permits blade access where space is limited


ShankPart Number Length Tip Width Overall Length Description601-6 6" 3/16" 9-3/4" 3/16" Cabinet-Tip Screwdriver - 6" Round-Shank




Tools and Test InstrumentsToolsKleinCushion-Grip ScrewdriversKeystone-Tip Screwdriver - Heavy-Duty Square-Shank

Features: Cushion-Grip handle for greater torque and comfort Premium chrome-plated for smooth feel and corrosion resistance Internal flanges inside handle provide solid, twist-resistant blade anchor Special heat-treated shafts, Precision-machined tip for exact fit Meets or exceeds applicable ASME / ANSI specifications Patented Tip-Ident quickly identifies the screwdriver type and tip orientation Heavy-duty square shank for wrench-assisted turning Bolster reinforces shank for hard use, Designed for the most demanding uses


ShankPart Number Length Tip Width Overall Length Description600-4 4" 1/4" 8-11/32" 1/4" Keystone-Tip Screwdriver - 4" Heavy-Duty Square-Shank

Phillips-Tip Screwdriver - Round-ShankFeatures: Cushion-Grip handle for greater torque and comfort Premium chrome-plated for smooth feel and corrosion resistance Internal flanges inside handle provide solid, twist-resistant blade anchor Special heat-treated shafts Precision-machined tip for exact fit Meets or exceeds applicable ASME / ANSI specifications Patented Tip-Ident quickly identifies the screwdriver type and tip orientation Tip is precision-machined to provide a more consistent geometric symmetry than conventional

Phillips-tip, screwdrivers Provides accurate fit and torque without slippage


Part Number Shank Length Overall Length Description603-4 4" 8-5/16" #2 Profilated Phillips-Tip Screwdriver - 4" Round-Shank

Terminal Block ScrewdriverFeatures: Precision machined tip provides exact fit for terminal block screws Tip is up to 19% stronger than competitors Tip provides 76% higher torque value than the required ASME B107 Standard Cushion-Grip handle offers greater torque comfort


ShankPart Number Length Tip Width Overall Length Description612-4 New! 4" 1/8” 7-3/4” Terminal Block Screwdriver




Tools and Test InstrumentsToolsKleinCutting & Notching ToolsFeatures: Forged steel cutting blades for superior strength and durability Soft touch grips for maximum control and comfort J2100L, J2101R, J2102S and J2106S snips feature exclusive Klein Kurve handles for natural hand positioning and ease of use J2100L, J2101R and J2102S Journeyman snips cut 18 gauge cold rolled steel and 22 gauge stainless steel http://www.service.kleintools.com/Tool/PRD/Catalog

Journeyman Offset Snip - Left CuttingCutting

Part Number Color Code Length Pattern Overall Length DescriptionJ2100L Red/Black 1-1/4" Left/Straight 9-1/2" Journeyman Offset Snip - Left

Cutting

Journeyman Offset Snip - Right CuttingCutting

Part Number Color Code Length Pattern Overall Length DescriptionJ2101R Green/Black 1-1/4" Right/Straight 9-1/2" Journeyman Offset Snip - Right

Cutting

Journeyman Offset Snip - Straight CuttingCutting

Part Number Color Code Length Pattern Overall Length DescriptionJ2102S Yellow/Black 1-1/2" Straight/Wide

Curves 9-1/2" Journeyman Offset Snip -

Straight Cutting

Electricians BagsTradesman Pro Organizer 10-Inch Tote

Features: 40 pockets for maximum tool storage, Orange interior for easy tool visibility Removable zipper bag designed to fit compartment underneath Tough, durable feet protect from the elements, 1680d ballistic weave for durability Shoulder strap and handles for easy carrying


PocketsPart Number Height Length Exterior Interior Description55416-10 12" 10" 22 18 Tradesman Pro Organizer 10-Inch Tote




Tools and Test InstrumentsToolsKleinElectricians BagsTradesman Pro Organizer 8-Inch Tote

Features: 20 pockets for greater tool storage, Orange interior for easy tool visibility Removable zipper bag designed to fit compartment underneath Tough, durable feet protect from the elements, 1680d ballistic weave for durability Handle for easy carrying


PocketsPart Number Height Length Exterior Interior Description55415-8 17" 8" 11 9 Tradesman Pro Organizer 8-Inch Tote

Tradesman Pro Organizer BackpackFeatures: 39 pockets for tons of tool storage Orange interior for easy tool visibility Wide opening fits power drills, meters, flashlights, etc Tough, durable molded bottom protects from the elements Large front pocket easily fits fish tapes 1680d ballistic weave for durability


PocketsPart Number Height Length Exterior Interior Description55421-BP 18" 14" 5 34 Tradesman Pro Organizer Backpack

Tradesman Pro Organizer Extreme Electricians BagFeatures: 78 pockets for extreme tool storage Orange interior for easy tool visibility Wide center with removable pockets for easy access to tools Tough, durable molded bottom protects from the elements 1680d ballistic weave for durability Shoulder strap and handles for easy carrying


PocketsPart Number Height Length Exterior Interior Description55417-18 16" 19" 25 53 Tradesman Pro Organizer Extreme Electrician’s Bag




Tools and Test InstrumentsToolsKleinElectricians BagsTradesman Pro Organizer Shoulder Pouch

Features: 16 pockets for better tool storage Orange interior for easy tool visibility Tough, durable rubber feet protect from the elements 1680d ballistic weave for durability Shoulder strap and handle for easy carrying


PocketsPart Number Height Length Exterior Interior Description55419-SP 10" 8" 7 9 Tradesman Pro Organizer Shoulder Pouch

Tradesman Pro Organizer Ultimate Electricians BagFeatures: 55 pockets for ultimate tool storage Orange interior for easy tool visibility Wide opening fits power drills, meters, laptops, etc Tough, durable molded bottom protects from the elements 1680d ballistic weave for durability Shoulder strap and handles for easy carrying


PocketsPart Number Height Length Exterior Interior Description55418-19 14" 17.5" 53 2 Tradesman Pro Organizer Ultimate Electrician’s Bag

Hard Hats & CapsV-Gard Hard Hat

Features: Polyethylene shell with 4-point Fas-Trac ratcheting suspension Standard size fits head sizes 6-8 Type 1 helmet meets or exceeds ANSI Z891-2003 and CSA Z941-2005 specifications for Class E Third Party Certified by Safety Equipment Institute Accessories designed specifically for the V-Gard Hat are available V-Gard and Fas-Trac are registered trademarks of MSA, the safety company


Part Number Style Color Description60028 Hat White V-Gard Hard Hat, White




Tools and Test InstrumentsToolsKleinHVAC/Sheet Metal ToolsMagnetic Hex Drivers

Features: For driving sheet metal screws Strong rare earth magnets for maximum holding 1/4” hex shank with quick release groove


Part Number Size Overall Length Description86600 1/4" 1-3/4" 1/4" Magnetic Hex Driver - 3 Pack86601 5/16" 1-3/4" 5/16" Magnetic Hex Driver - 3 Pack86602 3/8" 1-3/4" 3/8" Magnetic Hex Driver - 3 Pack

Nylon Tie Tensioning Tool with Auto-CutoffFeatures: Excess tie material is automatically cut off, Tensions up to 65 lbs (30 kg) Maximum tie width of 15/32" (12 mm), Designed to work with ties rated at 120 - 250 lbs


Part Number Weight Description86571 0.71 Lbs. Nylon Tie Tensioning Tool with Auto-Cutoff

HVAC/Sheet Metal Tools - Tube Cutters & AccessoriesProfessional Mini Tube Cutter

Features: Perfect for tight space cutting Requires only 1-3/8" swing radius Smooth feed mechanism for precise, right angle cutting action Not designed for cutting stainless steel or hard tempered tubing


Part Number Cuts Overall Length Description88977 1/8" - 5/8" O.D. tubing 1-3/4" Professional Mini Tube Cutter

Professional Tube CutterFeatures: Accurate 4 roller tracking system - no spiraling Professional reaming tool, Extra cutting wheel included


Part Number Cuts Handle Finish Description88904 1/8" - 1-3/8" steel and copper tubing Orange Professional Tube Cutter




Tools and Test InstrumentsToolsKleinKnives & BladesAuto-Loading Folding Rectractable Utility Knife

Features: Auto-loading blade feature for faster and safer blade changes High quality, triple ground blades stay sharp longer Rubber grips on handle for improved control and comfort Heavy-duty durable construction, Internal blade storage includes and holds 3 blades Blade release button for easy blade change


Part Number Length Closed Overall Length Description44130 4-1/4" 6-5/8" Auto-Loading Folding Rectractable Utility Knife

Auto-Loading Retractable Utility KnifeFeatures: Auto-loading blade feature for faster and safer blade changes High quality, triple ground blades stay sharp longer Rubber grips on handle for improved control and comfort Heavy-duty durable construction Internal blade storage includes and holds 3 b lades Blade release button for easy blade change


Part Number Overall Length Description44132 6-1/4" Auto-Loading Retractable Utility Knife

Double-Locking Folding Utility KnifeFeatures: Blade locks in both the open and closed positionan exclusive Klein design Easy blade thumb release – no tools required Uses heavy duty utility blades – most common blade found on the jobsite Includes pocket/belt clip for convenient storage, One blade included


Part Number Length Overall Length Description44108 3" 6-1/8" Double-Locking Folding Utility Knife

Folding Utility KnifeFeatures: Push button to easily open and close, High quality, triple ground blades stay sharp longer Rubber grips on handle for improved control and comfort, Heavy-duty durable construction


Part Number Length Closed Overall Length Weight Description44131 4-1/8" 4-1/2" 0.27 Lbs. Folding Utility Knife




Tools and Test InstrumentsToolsKleinKnives & BladesKlein-Kurve Retractable Utility Knife

Features: Designed for improved comfort and cutting ability, Blade release button for easy blade change High quality, triple ground blades stay sharp longer Rubber grips on handle for improved control and comfort Heavy-duty durable construction, Internal blade storage includes and holds 6 blades


Part Number Overall Length Weight Description44133 6-7/8" 0.47 Lbs. Klein-Kurve Retractable Utility Knife

Utility Knife Blade DispenserFeatures: 50 blades included, High quality, triple ground blades stay sharp longer Gauge on dispenser indicates blades remaining, Convenient interim storage for used blades Blades are compatible with all standard utility knives


Part Number Weight Description44103 1.00 Lbs. Utility Knife Blade Dispenser, Includes 50 Blades

Levels and Measuring ToolsMagnetic Tape Measures

Features: Nylon-coated hardened steel blade resists abrasion and wear for long life Built-in shock absorber to protect blade tip True zero feature for accurate inside and outside measuring Durable steel belt clip for convenience Multi-riveted end hook with bottom blade protector reinforces the blade tip and provides maximum pull-out strength Rare earth magnetic single end hook, First 11" has oversized, bold numbers Easy-read fractional scale, Double-sided rule for measurement while using against wall, ceiling or

conduit Horizontal and vertical standout for easy one person measurements Shock and impact resistant case, Steel belt clip for convenience


Part Number Length Weight Description931-25 New! 25 ft .91 Lbs. Tape Measure - 25’ Magnetic Single Hook




Tools and Test InstrumentsToolsKleinMulti-Bit Screwdrivers/Nut DriversRatcheting Multi-Bit Screwdriver/Nut Driver

Features: High-torque ratcheting mechanism for tough applications Interchangeable shaft holds 6 universal tips; converts to 3 nut driver sizes and 1 hex driver 3-way ratcheting mechanism for forward, reverse and locked positions Nut drivers are heat-treated for added strength and improved torque Cushion-Grip handle provide superior torque and comfort Contains: 3/16" and 1/4" slotted, #1 and #2 Phillips, 1/4", 5/16", and 3/8" nut drivers,#1 and #2

square-recess, 3/8" hex driver


Part Number Overall Length Weight Description32558 New! 8.0" 0.71 Lbs. Ratcheting Multi-Bit Screwdriver/Nut Driver

Stubby Multi-Bit Screwdriver/Nut DriverFeatures: Interchangeable shaft holds 4 universal tips and converts to 2 nut driver sizes Compact design features standard 1-1/4" shaft allowing easy access to tight work spaces Cushion-Grip handle provide greater torque and comfort Contains: 3/16" and 1/4" slotted, #1 and #2 Phillips, 1/4" and 5/16" nut drivers Patent pending


Part Number Overall Length Weight Description32561 3.2" 0.16 Lbs. Stubby Multi-Bit Screwdriver/Nut Driver

Plastic-Handle Nut DriversMagnetic Nut Drivers

Features: Smooth Comfordome handles fit the palm of the hand comfortably Handles are color-coded for easy identification Hollow shafts facilitate work on stacked circuit boards or other long bolt applications Chrome-plated shaft helps prevent corrosion Internal flanges provide solid, twist-resistant shaft anchor Meets or exceeds applicable ASME / ANSI specifications Powerful nut-holding magnet built into shank


Part Number Hex Size Handle Color Overall Length DescriptionS86M 1/4" Red 9-5/8" 1/4" Magnetic Nut Driver - 6"-ShankS106M 5/16" Amber 9-5/8" 5/16" Magnetic Nut Driver - 6"-Shank




Tools and Test InstrumentsToolsKleinPliersHeavy-Duty Long-Nose Pliers - Side-Cutting

Features: Hot-riveted joint ensures smooth action and no handle wobble Slim head design for working in confined areas Plastic-dipped handles for comfort and ease of identification Induction hardened cutting knives for long life Heavier design for greater cutting power Extended handles provide added reach and leverage


Handle Jaw Part Number Color Finish Size Thickness Width DescriptionD203-8 Yellow Plastic-Dipped 2-5/16" 1/2" 1" Heavy-Duty Long-Nose Pliers - Side-Cutting

High-Leverage Diagonal-Cutting Pliers - Angled HeadFeatures: Induction hardened cutting knives for long life Hot-riveted joint ensures smooth action and no handle wobble Short jaws and beveled cutting edges permit close cutting of wire Cuts ACSR, screws, nails, and most hardened wire Plastic-dipped handles for comfort and ease of identification Angled head design for easy work in confined spaces High-leverage design Rivet is closer to the cutting edge for 36% greater cutting power than other plier designs


Handle Jaw Part Number Color Finish Size Thickness Width DescriptionD248-8 Red Plastic-Dipped 13/16" 7/16" 1-3/16" High-Leverage Diagonal-Cutting Pliers - Angled Head

High-Leverage Side-Cutting PliersFeatures: Induction hardened cutting knives for long life Unique handle tempering helps absorb the "snap" when cutting wire High-leverage design Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs Streamlined design with sure-gripping, cross-hatched knurled jaws "Handform" handles for full gripping and cutting power Precision-hardened plier head for on-the-job toughness Sure-gripping cross-hatched knurled jaws Plastic-dipped handles for comfort and ease of identification


JawPart Number Handle Finish Size Thickness Width Knife Length DescriptionD213-9NE Plastic-Dipped 1-19/32" 5/8" 1-1/4" 25/32" High-Leverage Side-Cutting Pliers




Tools and Test InstrumentsToolsKleinPliersPump Pliers

Features: Secure tongue and groove design for non-slip grip – even with heavy pressure Wide range of versatile jaw positions


Handle Part Number Color Finish Overall Length DescriptionD502-10 Yellow Plastic-Dipped 10" Pump Pliers

Protective EyewearsModel 60058

Features: Contemporary Wrap-around design for exceptional coverage and vision Unique lens styling with side shield and bridge for protection Easy-fitting universal molded-in nose piece Lens available in clear Meets: ANSI, OSHA, CSA


Part Number Frame Color Lens Color Description60058 Black Clear Protective Eyewear - 60058

Protective Eyewear - FramelessFeatures: Temple-end holes for easy lanyard attachment Adjustable temple lengths provide a customized fit Permanently bonded anti-fog coating minimizes lens fogging in almost any environment Permanently bonded anti-UV coating blocks 99.9% of UVA and UVB radiation Permanently bonded anti-scratch coating for superior scratch resistance Frameless, wrap-around polycarbonate lens for unobstructed vision and coverage Lightweight, frameless design for all-day comfort Easy-fitting universal molded-in nosepiece, Lens available in clear


Part Number Frame Color Lens Color Description60056 Black Clear Protective Eyewear - Frameless, Clear Lens, Black Frame60057 Black Brown Tint Protective Eyewear - Frameless, Brown Tint Lens, Black Frame




Tools and Test InstrumentsToolsKleinProtective EyewearsProtective Eyewear - Standard

Features: Meets Mil V0 ballistic test for impact Soft elastomer brow-guard absorbs, diffuses and deflects impact energy Soft flexible fingers adjust and conform to most nasal profiles reducing slippage Three position ratchet lens inclination adjusts for a custom fit and unsurpassed comfort Lens designed to follow the contour of the cheekbone and create a “zone of protection” Dual 9-base wrap-around lens provides uncompromised peripheral vision Unique ventilation channel delivers an outstanding level of moisture and fog control


ColorPart Number Frame Lens Light Intensity Description60053 Black Clear Normal to Low Protective Eyewear - Standard, Black Frame, Clear Lens60054 Royal Blue Clear Normal to Low Protective Eyewear - Standard, Royal Blue Frame, Clear Lens60055 Black Espresso Normal to Bright Protective Eyewear - Standard, Black Frame, Espresso Lens

Protective GogglesFeatures: General-purpose cover-type protective goggles of soft vinyl plastic Comfortable and shaped to conform to facial contours Fits easily over personal glasses Top and bottom edges perforated for direct ventilation Lightweight adjustable elastic strap Meets ANSI Z87 1-2003 and CSA Z94 3


Part Number Weight Description60040 .25 Lbs. Protective Goggles - Model 6004060041 .05 Lbs. Replacement Lens for Model 60040

Screw-Holding ScrewdriversPhillips Screw-Holding Screwdriver

Features: Starts and drives screws with one hand when working in hard-to-reach spaces Cushion-Grip handle provides superior torque and comfort with non-slip grip


Part Number Overall Length Description32216 11-1/4" #2 Phillips Screw-Holding Screwdriver




Tools and Test InstrumentsToolsKleinScrew-Holding ScrewdriversSlotted Screw-Holding Screwdriver

Features: Starts and drives screws with one hand when working in hard-to-reach spaces Cushion-Grip handle provides superior torque and comfort with non-slip grip


Part Number Overall Length Description32215 11-1/4" 1/4" Slotted Screw-Holding Screwdriver

Special-Purpose KnivesSerrated Duct Knife

Features: Cuts duct board and flexible duct, Double-edged knife-regular and serrated Puncture resistant nylon sheath with belt loop, Cushion-grip handle for comfort


Part Number Length DescriptionDK06 5-1/2" Serrated Duct Knife

Testers - Voltage TestersDual Range Non-Contact Voltage Tester

Features: Automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC)

allowing broad application Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures,

switches, outlets and wires Non-contact detection of low voltage in security, entertainment, communications, environmental

control, and irrigation systems High intensity, bright green LED indicates the tester is operational and aids in illuminating the

workspace, Digitally controlled ON/OFF power button Auto power-off feature conserves and extends battery life, Microprocessor controlled low-battery

indicator, CAT IV 1000 Volt rating provides expanded operation and protection Lightweight, durable polycarbonate plastic resin construction; convenient pocket clip Standards: UL 61010-1 2nd edition , CAN/CSA C222 No 610101-04 EN 61010-1 2nd edition , IEC 61010-1:2001 2nd edition, ISA-820201 (IEC 61010-1 MOD)


Part Number Height Batteries Enviroment Frequency OperatingAltitude

Description

NCVT-2 1.0" Two Alkaline 1.5VAAA

Indoor 50-500 Hz 2000m Dual Range Non-Contact Voltage Tester

Voltage Range 12 TO 48 Volts AC (Low) 48 TO 1000 Volts AC (Standard) Audible Low-Pitched Pulsing Beeping Sound High-Pitched Continuous Beeping Sound

Visual Green LED Turns OFF and Red LED Blinks (approximately 2-times per second).

Green LED Turns OFF and Red LED illuminates continuously.




Tools and Test InstrumentsToolsKleinWire Strippers/CuttersKlein-Kurve Wire Stripper/Cutter - Solid and Stranded Wire

Features: Precision shear-type blades for clean cuts on solid and stranded copper wire Easy-to-read markings on both sides, Curved handles help reach into confined areas Wire looping and bending holes, Coil spring provides fast self-opening action Precision-ground stripping holes, Double-dipped comfort grips Strong-gripping serrated nose; for easy bending, shaping, and pulling of wire Screw-shearing holes, Handy closure lock for convenient storage


Part Number Handle Color Overall Length Description11055 Blue and Yellow 7-1/8" Klein-Kurve Wire Stripper/Cutter - Solid and Stranded Wire

WrenchesAdjustable Wrench - Extra Capacity

Features: Precision-machined jaws are individually chosen and assembled by hand for smooth operation Heat-treated for long life, Knurl turns smoothly for easy operation Rail is ground for precision fit, Contoured handles for comfor table use Chrome-plated for rust resistance, Available in high-capacity, Extra capacity allows use of a

smaller size wrench to handle bigger jobs, especially in confined spaces, Forged heat-treated alloy steel for maximum strength and light weight


Part Number Length Capacity Handle Finish DescriptionD507-6 6-3/8" 15/16" (23 mm) Plastic-Dipped 6-3/8" (162 mm) Adjustable Wrench - Extra-CapacityD507-8 8-3/8" 1-1/8" (28 mm) Plastic-Dipped 8-3/8" (213 mm) Adjustable Wrench - Extra-CapacityD507-10 10-3/8" 1-5/16" (33 mm) Plastic-Dipped 10-3/8" (264 mm) Adjustable Wrench - Extra-Capacity

TorchesCutskillTote KitsCST-150 Tote Kit

Features: This series of outfits is designed for Light Duty Cutting,

Brazing and Heating jobs. Oxygen Regulator SKR-540R Fuel Regulator SKR-200R 12.5" Dual "A" 3/16 Hose 252-03P, Goggles,

Check Valves , Str iker Handle - 103-01FP Cutting Attachment - SLCA1260 Cutting Tip - 0-3-101 Nozzles - O-W-J, 2-W-J

http://victortechnologies.com/turbotorch/

Part Number Industrial Applications Description0386-1326 High Capacity Applications, HVAC CST-150 Tote Kit, Oxy-Acetylene, Without Tanks




Tools and Test InstrumentsTorchesCutskillTote KitsCST-CP Tote Kit

Features: Oxygen Regulator SKR-540R Fuel Regulator SKR-200R 12.5" Dual "A" 3/16 Hose 252-03P, Goggles, Check Valves , Striker

Handle - 103-01FP Cutting Attachment - SLCA1260 Cutting Tip - 0-3-101 Nozzles - O-W-J, 2-W-J, Tank Key - 0386-1226


Part Number Case Industrial Applications Description0386-1322 1421-0084 High Capacity Applications, HVAC CST-CP Tote Kit, Oxy-Acetylene, Without Tanks

CST-CPT Tote KitFeatures: This series of outfits is designed for Light

Duty Cutting, Brazing and Heating jobs. Oxygen Regulator SKR-540R Fuel Regulator SKR-200R 12.5" Dual "A" 3/16 Hose 252-03P, Goggles, Check Valves, Striker

Tank Key - 0386-1226 Oxy Cylinder - Type "R" (20cu.ft.) Fuel Cylinder - Type "MC" (10cu.ft.) Cutting Attachment - SLCA1260 Cutting Tip - 0-3-101, Nozzles - O-W-J, 2-W-J


Part Number Case Industrial Applications Description0386-1323 1421-0084 High Capacity Applications, HVAC CST-CPT Tote Kit, Oxy-Acetylene, with Tanks

CST-P Tote KitFeatures: This series of outfits is designed for Light Duty Cutting, Brazing and Heating jobs. Oxygen Regulator SKR-540R Fuel Regulator SKR-200R 12.5" Dual "A" 3/16 Hose 252-03P Goggles Check Valves Striker Handle - SKH-7A Nozzles - O-W-J, 2-W-J


Part Number Case Industrial Applications Description0386-1320 1421-0084 High Capacity Applications, HVAC CST-P Tote Kit, Oxy-Acetylene, Without Tanks




Tools and Test InstrumentsTorchesCutskillTote KitsCST-PT Tote Kit

Features: This series of outfits is designed for Light

Duty Cutting, Brazing and Heating jobs. Oxygen Regulator SKR-540R Fuel Regulator SKR-200R 12.5" Dual "A" 3/16 Hose 252-03P, Goggles,

Check Valves ,Striker, Nozzles - O-W-J 2-W-J Tank Key - 0386-1226, Handle - 103-01FP Oxy Cylinder - Type "R" (20cu.ft.), Fuel Cylinder - Type "MC" (10cu.ft.)


Part Number Case Industrial Applications Description0386-1321 1421-0084 High Capacity Applications, HVAC CST-PT Tote Kit, Oxy-Acetylene, with Tanks

TurboTorchCylinderAC-MC Acetylene

Features: Type "MC" Acetylene Cylinder, 10 cu. ft. capacity. CGA 200 Connection, Fits TurboTote 0386-1241 Case Fits Cutskill Tote 1421-0084, DOT, TC Certified


Part Number Industrial Applications Description0916-0002 High Capacity Applications, HVAC AC-MC Acetylene, 10 cu ft, Cylinder, CGA-200

NT-40 NitrogenFeatures: 40 cu. ft. Nitrogen Cylinder CGA 580 Connection, DOT, TC Certified


Part Number Industrial Applications Description0916-0028 High Capacity Applications, HVAC NT-40 Nitrogen, 40 cu ft, Cylinder, CGA-580

OX-20 OxygenFeatures: Type "R" Oxygen Cylinder, 20 cu. ft. capacity. CGA 540 Connection, Fits TurboTote 0386-1241 Case Fits Cutskill Tote 1421-0084, DOT, TC Certified


Part Number Industrial Applications Description0916-0003 High Capacity Applications, HVAC OX-20 Oxygen, 20 cu ft, Cylinder, CGA-540




Tools and Test InstrumentsTorchesTurboTorchNitrogen245-03P Regulator

Features: Unique Gauge Guard for Added Protection Easy to Adjust Color-Coded Knob 800 PSI Delivery Zinc Aluminum Housing Cap for Added Strength 1/4" Flare Fitting Color-Coded Knobs Single Stage Forged Brass Body and Zinc Aluminum Housing Cap Three Year Warranty DOT, TC Certified


Part Number Delivery Range High Pressure Gauge Industrial Applications Description0386-0814 P.S.I.G. 0-500, KPA

0-3500P.S.I.G. 4,000, KPA

28,000High Capacity

Applications, HVAC245-03P Regulator, Nitrogen

NPK-40 Nitrogen Purge KitFeatures: 6 ft/1.8m Hose OSHA Rated Blow Gun Regulator 245-03P Carrying Case Multiple Uses: Purges, Blows, Leak Tests DOT, TC Certified


Part Number Industrial Applications Description0386-1236 High Capacity Applications, HVAC NPK-40 Nitrogen Purge Kit, Nitrogen

NPK-TT Nitrogen Purge KitFeatures: 245-03P Nitrogen Regulator Blow Gun 6' Hose 3' Hose Turbo Tornado tip, Needle Tip 3/4'' Cone Plug ,1/2'' Cone Plug

Tire Chuck , CO2 Adapter Applications Purging Lines Prior To Brazing Leak Testing, Inflating Tires Flushing Drainage Lines Cleaning Components and Coils


Part Number Gas Type Description0386-1370 Nitrogen NPK-TT Nitrogen Purge Kit, Nitrogen




Tools and Test InstrumentsTorchesTurboTorchNozzlesVMA-J-15 Nozzle Multi Flame

Features: For use with J Series Torch Handles. General purpose welding and pre-heating. One piece copper elbow tip. Long cone flame. Fuel Gas Usage - Acetylene,

Hydrogen One piece copper elbow tip Long cone flame Built-in Spiral Mixer

Applications High capacity applications HVAC Light Duty


Part Number Model Description0325-0109 VMA-J-15 Clamshell VMA-J-15 Nozzle Multi Flame, Oxy-Acetylene

Oxy-Acetylene201-05FP Regulator

Part Number Gauge Size Delivery Range High PressureGauge

IndustrialApplications

Description

0386-0784 1-1/2" P.S.I.G. 2-15, KPA14-105

P.S.I.G. 400, KPA2,800

High CapacityApplications, HVAC

201-05FP Regulator, Oxy-Acetylene,Acetylene, Metal tote

221-05FP Regulator

Part Number Delivery Range Gauge Size High PressureGauge

IndustrialApplications

Description

0386-0786 P.S.I.G. 4-80, KPA28-570

1-1/2" P.S.I.G. 4,000, KPA28,000

High CapacityApplications, HVAC

221-05FP Regulator, Oxy-Acetylene,Oxygen, No Tote

Torch Kits & Accessories252-03P Hose

Part Number Length Description0386-1094 12.5’ 252-03P Hose, 12.5’ Hose, Oxy-Acetylene, ’A’ Fittings




Tools and Test InstrumentsTorchesTurboTorchTorch Kits & AccessoriesTDLX2003MC Torch Kit Swirl

Features: Extreme Self Lighting Tip Extreme Standard Tip Ergonomic Handle with Quick Disconnect Tank Tote Choose between the MC or B kits

Kit Includes PL-8ADLX-MC Extreme Air Acetylene Kit A-5 Extreme Air Acetylene Tip TT-MC Tote


Part Number Industrial Applications Description0426-0011 High Capacity Applications, HVAC TDLX2003MC Torch Kit Swirl, Air Acetylene

TT-MC Tank ToteFeatures: Heavy duty steel construction fits “MC” tank or MT-1 Mapp tank. Easy storage of tips, handle, hose and striker .


Part Number Model Description1421-0035 TDLX2003 TT-MC Tank tote Tote, for MC tank, Air Acetylene, Metal tote

VictorNozzlesWelding Nozzle

Features: For use with J Series Torch Handles General purpose welding and pre-heating One piece copper elbow tip Long cone flame Fuel Gas Usage - Acetylene, Hydrogen One piece copper elbow tip


Part Number Brazing Capacity ForCopper Tubing

Industrial Applications Description

0387-0039 1/8" - 3/4" General Purpose Welding Victor Professional Welding Nozzle, Clamshell, Size: 000387-0040 1/4" - 1" General Purpose Welding Victor Professional Welding Nozzle, Clamshell, Size: 00387-0041 1/4" - 1-1/4" General Purpose Welding Victor Professional Welding Nozzle, Clamshell, Size: 10387-0042 1/2" - 1-1/2" General Purpose Welding Victor Professional Welding Nozzle, Clamshell, Size: 20387-0043 3/4" - 1-3/4" General Purpose Welding Victor Professional Welding Nozzle, Clamshell, Size: 30387-0044 3/4" - 2" General Purpose Welding Victor Professional Welding Nozzle, Clamshell, Size: 4




Tools and Test InstrumentsTorchesVictorTorch Kits & AccessoriesCutting Attachment

Features: Stainless Steel Tubes - for added torch strength & heat resistance Die-forged brass head - for maximum durability Spiral mixer - blends oxygen & all fuel gases for optimum performance Forged Brass Body Brass Coupling Nut & Double "O" Ring Seal - gives quick gas-tight seal without a tightening wrench Stainless Steel Lever - for extra durability Fuel Gas Usage: Can be used with all fuel gases with the proper cutting tip


Part Number Length Cutting Range Head Angle Performance Description0387-0003 8" 6"/152.4mm 90° Light Duty Light Duty CA 1260 Cutting Attachment for Use with All Fuel

Gases Clamshell Package

Replacement Gauges

Part Number Description1424=0431 1-1/2" x 30#/200 KPA Red Face Gauge1424=0432 1-1/2" x 100#/700 KPA Green Face Gauge1424=0423 1-1/2" x 400#/2800KPA Red Face Gauge1424=-0424 1-1/2" x 4000#/28,000KPA Green Face Gauge




Tools & Test Instruments 175

Chemicals &Compounds

SPRING/SUMMER 2013


Visit us at www.nucalgon.com or call 1-800-554-54991

Nu-Brite®Nu-Brite is the most effective coil cleaner available today. It foams, brightens, and is an equally effective yet safer alternative to HF acid-based products. It produces a high volume of foam that cleans more effectively than acids, particularly in removing grease. Biodegradable. USDA approved.

1 gallon bottle 4291-08

Alka-Brite® PlusA non-acid, alkaline based product for brightening and cleaning air cooled condensers. It contains the best available detergents to quickly penetrate and remove oxidation, and its foaming action helps to lift greasy soils out of the coil. Biodegradable.


Cal-Brite® Cal-Brite is a low pH cleaner developed for cleaning evaporator coils, air-cooled condensers and other finned cooling and heating coils. It is based upon glycolic acid and other ingredients, including the unique surfactant, Merpol®. It provides moderate foaming and brightening and is safe for use indoors as well as outdoors.


CalClean® An alkaline detergent formulated for cleaning evaporator coils, air-cooled condenser coils, metal filters, fan blades, and other surfaces soiled with grease, dust and dirt. Biodegradable. USDA approved.


Foam-Brite®The ultimate in foaming alkaline cleaners. It provides for excellent cleaning and brightening, and at the same time provides tremendous foaming to push dirt and grime out of the coil. Can easily be used in place of the more dangerous HF acid-based products. Biodegradable.


Coil

Cle

aner

s

Tri-Pow’r® HD An outstanding general purpose coil cleaner, providing detergency and degreasing as well as deodorizing capability. Its positive emulsion technology is very effective against oily grime as it converts the deposits into a more fluid or liquid form that can be easily rinsed away. It is non-acid, non-toxic, and biodegradable.


Green CleanA pleasantly scented, all-purpose cleaner designed for the rapid removal of grease and other heavy soils. It can be used right out of the bottle or diluted for milder jobs. Biodegradable.

1 quart spray bottle 4186-241 gallon bottle 4186-08

TriClean 2x™ The new way to clean a condenser coil. Simply connect to hose, clean, and rinse. TriClean 2x is metal-safe, designed for rapid emulsion of soils from the coil. Restores efficiency and is ideal for painted fin and microchannel coils.

1 quart sprayer with hose connector 4372-24

Evap Pow’r®A no rinse product formulated for cleaning evaporator coils. It is metal-safe, and it cleans and emulsifies even the most stubborn soils and deposits. Biodegradable. USDA approved.


Rep

lace

men

t p

arts

are

ava

ilab

le f

or

all N

u-C

alg

on

sp

raye

rs. C

on

tact

you

r lo

cal w

ho

lesa

ler.

Evap-Green™Evap-Green is also part of the EPA’s Design for the Environment program which tests and identifies products that are safer for the environment. This no rinse product is perfect for numerous heating and air conditioning applications such as evaporator coils, roof top units, window units, metal filters, fan blades, and more. By using Evap-Green, a natural plant based formulation, the coil is being cleaned with the most environmentally friendly product available. It is also safe to be used around people, plants, animals, and aquatic life.


Cal-Green™Cal-Green has been recognized by the EPA’s Design for the Environment program, which tests and identifies products that are safer for the environment. Cal-Green is a plant-based, natural condenser cleaner that is powerful enough to remove dirt, grease, and grime but environmentally safe for use around people, plants, animals, and aquatic life. This non-foaming, non-toxic concentrate is perfect for cleaning residential or commercial systems and restores their efficiency while being environmentally responsible.


Chemicals & Compounds 1


Sprayers

Multi-Purpose SprayerA 24 ounce capacity sprayer. It is ideal for small cleaning jobs, such as window units and water coolers.

1 each 4768-W3 1 each 4774-0

Coil Gun®A different approach to coil cleaning - a “hose-end” sprayer that features 5 different mix ratio settings designed for coil cleaners. Utilizes a 2 quart capacity bottle and includes a foam wand as well as “quick disconnect” capability.

Pan-Treat®Condensate tablets that control odors and prevent overflows caused by plugged condensate drain lines. They can also be used in humidifiers. Very easy to use, as well as safe, non-corrosive, non-toxic, and biodegradable.

1 bottle (200 tablets) 4296-60

Gel TabsFormulated with a breakthrough technology for treating air conditioning drain pans and lines. Keeps the drain pan from clogging and eliminates foul and musty odors. Condensation turns the tablet to gel and locks it into place. Dissolves continuously and completely with nothing left to remove for up to 3 months. Stack together to increase duration.

PanPadsA product formulated to eliminate the build-up of bacteria and slime growths in air conditioning and refrigeration condensate drain pans. In laboratory tests, it has been proven effective against a wide spectrum of harmful bacteria, including Legionella. All sizes will provide adequate treatment for up to 6 months and the product is EPA-registered for this application.

5 (up to 5 tons) 4295-345 Slim (up to 5 tons) 4295-36

3 ton tab (12 in tube) 4185-03

Indoor A

ir Qu

ality

Gas Leak DetectorA high viscosity liquid that forms bubbles when daubed on a gas leak. Non-corrosive, non-staining, harmless to skin. Detects any type of gas leak such as air, compressed air, carbon dioxide, nitrogen, natural gas, and refrigerant gases. Freeze-protection to -20˚F. Six ounce plastic bottles have dauber in cap. USDA approved.

1 quart spray bottle 4182-246 ounce bottle 4180-53 1 quart spray bottle 4184-24

Cal-Blue® Plus Gas Leak DetectorCal-Blue Plus is a complete gas leak detector, freeze protected to 5˚F. Its high viscosity formula enables it to remain in contact with the applied surface for an extended period of time, allowing it to detect the smallest of leaks. It is also non-corrosive to metal, and it will not affect ultraviolet or black lights.

Fluorescent Gas Leak DetectorA fluorescent formulation that provides improved visibility and long lasting bubbles. It is non-corrosive to metals and is freeze protected to 5˚F. Suitable for high and low temperature applications. Can be used for most refrigerants, natural gas and oxygen systems. USDA approved.

Gas L

eak Detectors

No. 220CP Poly SprayerConstructed out of high-density translucent polyethylene with a funnel-top that provides easy chemical pouring. Its 2 gallon capacity features an easy fill level indicator and comes with an 8˝ pump and a high resin plastic adjustable nozzle with three feet of hose.

1 each 4771-3



Rx11-flush®Rx11-flush is an ozone-safe solvent engineered specifically for flushing refrigeration and air conditioning systems and line sets. It is strong enough to rinse away particulates, sludge, carbon residues, acids, oils, and water after burnouts. Rx11-flush is ideal for flushing line sets on R-410A conversions, works fast, and is easy to use. The Rx11-flush product family also includes various support tools. This includes the new and improved Injection Valve for hooking up to a charging hose for flushing and the Flushing Tool for facilitating line set flushing.(Injection Valve fits Pneu-flush® , A/C Re-New, and Pressurized Rx-Acid Scavenger as well)

Rx11-flush Starter Kit 4300-081 lb. canister 4300-092 lb. canister 4300-11Injection Valve 4300-89

A/C EasyDryA quick and simple way to prevent and eliminate moisture in a system. Contains a dehydrating agent that converts system moisture into a natural organic material that is compatible with and mixes with the lubricant. Great for preventing acid formation caused by moisture in a system and works with all refrigerants (except ammonia). Will treat up to a 5 ton system and easily installed with the reusable piercing valve and hose.

3 ounce can 4051-06

Rx-Acid Scavenger®The most effective way to neutralize or “scavenge” acid in refrigeration, air conditioning systems. Perfect for use after burnouts or during normal on-going system maintenance. Normal dosage is 2 ounces for every one gallon of system oil, which is 50% less than other acid neutralizing products. This “low treat” feature means far less material has to be added to the system. Can be used with mineral, alkylbenzene and polyol ester lubricants.

2 ounce bottle 4301-023.8 ounce pressurized can 4301-05

A/C EasySealA/C EasySeal circulates with the system’s refrigerant, and if a leak should occur, it will quickly seal the leak and prevent the system from losing refrigerant and shutting down. A/C EasySeal represents an excellent opportunity to utilize such technology in preventing and sealing refrigerant leaks in residential and light commercial ACR systems. It is perfect for those hard-to-find and expensive-to-fix leaks and works with all refrigerants (except ammonia). It is easily installed with the reusable piercing valve and hose.

3 ounce pressurized can 4050-06“2+1” Display Pack 4050-02Piercing Valve and Hose 4051-99

Tota

l Sys

tem

Pro

tect

ion

Spec

ialt

y P

rodu

cts

Humidi-Treat™Humidi-Treat is designed for humidifiers using up to 25 gallons per day and will inhibit scale for one season. Install Humidi-Treat on the water line that supplies water directly to the humidifier.

1 each 4190-02

Degreasing Solvent efA volatile solvent that provides effective degreasing and cleaning. Controlled drying with absolutely no residue. Ozone-safe and environmentally friendly with a dielectric strength in excess of 26,000 volts.


Cal-Vac™ Vacuum Pump OilA quality, high-grade lubricant that performs at the deepest vacuum. It has a very low vapor pressure and it has excellent lubricity for complete surface protection. It contains no additives or detergents.

1 pint bottle 4383-341 quart bottle 4383-241 gallon bottle 4383-07



Scrubs-In-A-Bucket® HVAC80The original Scrubs. Disposable, pumice-performance waterless hand cleaner towels that effectively and quickly clean hands on a wide variety of industrial soils and greases. Each self-dispensing portable canister contains 80 perforated disposable heavy-duty towels and are pre-moistened with the famous Scrubs cleaning formulation. Effective yet gentle to the skin. Use anywhere, anyplace, anytime.

80 ct bucket HVAC80 4366-87

Great WipesIndustrial Strength Hand Towels are waterless wipes made specifically for the air conditioning, refrigeration, and plumbing service technician. Each premoistened, heavy duty towel has strong pumice scrubbing power that conveniently cleans anywhere and anytime.

75 count canister 4185-75

11 ounce tube 4371-36

Thermo-Trap®The industry’s original heat absorbing paste designed to isolate heat encountered in soldering, welding, and brazing, thereby preventing damage to nearby heat sensitive controls, fittings, or other material. USDA approved. Biodegradable.

Thermo-Trap® GelA heat sink that has an extremely high capacity for absorbing heat. Applied to the metal working surface between the area to be heated and the material to be protected, Thermo-Trap Gel absorbs the heat, preventing heat transfer. This keeps heat from spreading beyond the work area, protecting components, installed fittings, and other sensitive parts from damage.

1 quart spray bottle 4371-324 ounce spray bottle 4371-53

Nu-Foam®Expanding polyurethane prepolymer foam. Used as a sealant and insulating product on openings created for refrigeration, air conditioning and heating tubes or pipes, duct joints, and other areas where unwanted air penetration might occur. Contains no CFCs nor any HCFCs.

9 ounce can 4293-04

Insu

lation P

roducts

Specialty Produ

cts

Cork-Tite™ Insulation TapeDesigned for all types of climates insulating cold pipes for all kinds of air conditioners in cars, homes, freezers, and refrigerators. Helps stop condensation problems and is ideal for retarding heat gain in cold pipes and preventing heat loss in hot pipes.

An effective sound dampening material, it can also be used for gasketing purposes. It sticks to all kinds of dry metals and seals tightly without drying. It is flexible and does not shrink or melt within the service temperature of -20°F (-29°C) to +200°F (+93°C).

2˝ x 1/8˝ x 30´ roll 4217-12

Cork Insulation TapeThis tape has been formulated and manufactured for the air conditioning and refrigeration industry. It meets and exceeds specifications as an insulating material for preventing sweating and condensation on refrigerant lines, cold pipes, and other

commercial refrigeration and a/c systems. It also serves as an excellent insulator on hot pipes, a gasketing material, a sound-deadening material, and may be used for wrapping valves, tees, and fittings. Can be applied at temperatures as low as -30˚F.

2˝ x 1/8˝ x 30´ roll 4217-W3

Foam-Tite™ Insulation TapeThis economically priced tape is formulated from quality thermal insulation material. It utilizes closed-cell construction and can be used on cold water pipes, chilled water lines and refrigerant lines to prevent sweating and condensation. It can also

be used on hot water lines, for better insulation against heat loss. Can be overlapped or edges can be butted together.

2˝ x 1/8˝ x 30´ roll 4219-12

Sealing and Caulking CordsSealing and Caulking Cords are nonstaining sealers formulated from the highest quality raw materials. They are water-resistant, dust-resistant and white in color. In addition, they securely adhere to most surfaces and provide excellent insulation value.

They are available in 3/8˝ pre-shaped extruded cords, with serrated release paper.

3/8˝ x 25´ roll 4216-27

Thumb-Tite®This compound is formulated and manufactured for use in many sealing, insulating, and general maintenance applications. It has excellent adhesion capability and is non-staining, non-hardening, and unaffected by wide variations in temperature - an

excellent thumbing grade. It is packaged in 2 pound boxes, each box contains two one pound bars.

2 lb. box 4216-92


Scrubs-In-A-Bucket® HVAC80The original Scrubs. Disposable, pumice-performance waterless hand cleaner towels that effectively and quickly clean hands on a wide variety of industrial soils and greases. Each self-dispensing portable canister contains 80 perforated disposable heavy-duty towels and are pre-moistened with the famous Scrubs cleaning formulation. Effective yet gentle to the skin. Use anywhere, anyplace, anytime.

80 ct bucket HVAC80 4366-87

Great WipesIndustrial Strength Hand Towels are waterless wipes made specifically for the air conditioning, refrigeration, and plumbing service technician. Each premoistened, heavy duty towel has strong pumice scrubbing power that conveniently cleans anywhere and anytime.

75 count canister 4185-75

11 ounce tube 4371-36

Thermo-Trap®The industry’s original heat absorbing paste designed to isolate heat encountered in soldering, welding, and brazing, thereby preventing damage to nearby heat sensitive controls, fittings, or other material. USDA approved. Biodegradable.

Thermo-Trap® GelA heat sink that has an extremely high capacity for absorbing heat. Applied to the metal working surface between the area to be heated and the material to be protected, Thermo-Trap Gel absorbs the heat, preventing heat transfer. This keeps heat from spreading beyond the work area, protecting components, installed fittings, and other sensitive parts from damage.

1 quart spray bottle 4371-324 ounce spray bottle 4371-53

Nu-Foam®Expanding polyurethane prepolymer foam. Used as a sealant and insulating product on openings created for refrigeration, air conditioning and heating tubes or pipes, duct joints, and other areas where unwanted air penetration might occur. Contains no CFCs nor any HCFCs.

9 ounce can 4293-04

Insu

lation P

roducts

Specialty Produ

cts

Cork-Tite™ Insulation TapeDesigned for all types of climates insulating cold pipes for all kinds of air conditioners in cars, homes, freezers, and refrigerators. Helps stop condensation problems and is ideal for retarding heat gain in cold pipes and preventing heat loss in hot pipes.

An effective sound dampening material, it can also be used for gasketing purposes. It sticks to all kinds of dry metals and seals tightly without drying. It is flexible and does not shrink or melt within the service temperature of -20°F (-29°C) to +200°F (+93°C).

2˝ x 1/8˝ x 30´ roll 4217-12

Cork Insulation TapeThis tape has been formulated and manufactured for the air conditioning and refrigeration industry. It meets and exceeds specifications as an insulating material for preventing sweating and condensation on refrigerant lines, cold pipes, and other

commercial refrigeration and a/c systems. It also serves as an excellent insulator on hot pipes, a gasketing material, a sound-deadening material, and may be used for wrapping valves, tees, and fittings. Can be applied at temperatures as low as -30˚F.

2˝ x 1/8˝ x 30´ roll 4217-W3

Foam-Tite™ Insulation TapeThis economically priced tape is formulated from quality thermal insulation material. It utilizes closed-cell construction and can be used on cold water pipes, chilled water lines and refrigerant lines to prevent sweating and condensation. It can also

be used on hot water lines, for better insulation against heat loss. Can be overlapped or edges can be butted together.

2˝ x 1/8˝ x 30´ roll 4219-12

Sealing and Caulking CordsSealing and Caulking Cords are nonstaining sealers formulated from the highest quality raw materials. They are water-resistant, dust-resistant and white in color. In addition, they securely adhere to most surfaces and provide excellent insulation value.

They are available in 3/8˝ pre-shaped extruded cords, with serrated release paper.

3/8˝ x 25´ roll 4216-27

Thumb-Tite®This compound is formulated and manufactured for use in many sealing, insulating, and general maintenance applications. It has excellent adhesion capability and is non-staining, non-hardening, and unaffected by wide variations in temperature - an

excellent thumbing grade. It is packaged in 2 pound boxes, each box contains two one pound bars.

2 lb. box 4216-92



Aer

osol

Pro

duct

s Evap Foam No Rinse®Evap Foam No Rinse is a high performing, heavy duty detergent. It is formulated with special surfactants and alkaline cleaners that have been developed into a foaming, no-rinse product. Evap Foam is ideal for use on most coils, but it is particularly suited for use on cooling or evaporator coils. The aerosol can be sprayed either right side up or upside down. NSF registered.

18 ounce can 4171-75

Nu-Brite®Nu-Brite is a very effective degreaser and cleaner on condenser coils. Its high foaming characteristic will help push soil deposits out of the coil, leaving it clean and bright. With proper ventilation, it can also be used as a kitchen degreaser by emulsifying stubborn, resistive grease deposits found on coils located in kitchens. Product should be used where adequate rinsing is possible.


Degreasing Solvent efA degreasing solvent, specially formulated for cleaning and degreasing equipment where washing or flushing is not possible. Simply spray on and wipe off. Penetrates quick and deep, loosening and liquefying heavy greases and tar. Non-corrosive and non-staining with a dielectric strength over 26,000 volts.


Electrical Contact CleanerCleans, lubricates, and protects electrical contacts from corrosion, and is safe on most plastics. Cleaning action quickly removes greases, dust, and oxidation, restores and maintains precision and efficiency to the instrument and component. Includes extension tube for pinpointing application. USDA approved.


Nu-Blast® Condenser Coil CleanerA no rinse condenser coil cleaner in a convenient aerosol package. Double action of high pressure blast and solvent cleaning restores design efficiency of condenser coils. It is non-flammable and non-conductive. No rinse required - cleaning solvent evaporates completely. Use with adequate ventilation.


Nu-Kill® II Wasp and Hornet KillerA “quick-kill” spray formulation EPA regirstered to instantly and effectively kills wasps, hornets, and yellow jackets, from distances up to 20 feet. Nu-Kill II kills with residual action as wasps and hornets return to their nest. The formula is safe in and around electrical equipment, having a dielectric strength of 47,000 volts.

13.5 ounce can 4292-75

Break-n-Lube™This advanced technology 4-in-1 product is made with CERFLON® for high performance in a non-drying penetrating lubricant. It’s highly versatile with the ability to penetrate, lubricate, displace moisture, and provide superior resistance to corrosion. It’s especially formulated to help free rusted parts and assemblies.


Spray-n-Bond™A wide web spray adhesive formulated specifically for insulation and duct liner applications. Ideal for porous surfaces, it is waterproof, flexible, transparent, non-staining, and it can be used for both temporary or permanent bonds. Formulated with the environment in mind, it contains no chloronated solvents or ozone depleters, and it is voc-compliant in states such as California.


Evap-Fresh® No RinseEvap-Fresh is a ready-to-use, no rinse cleaner and disinfectant for evaporator coils. It effectively cleans as well as kills mold and bacteria. This one-step no rinse disinfectant cleaner is perfect for air conditioners, commercial air handling units, HVAC cooling coils, refrigeration equipment, and evaporator coils. EPA registered specifically for use on HVAC equipment to kill H1N1 viruses such as Norwalk, Rhoto, and more.


CalClean® CalClean is a heavy duty detergent formulation of surfactants, grease solvents, alkaline cleaners, corrosion inhibitors, and water conditioners. Ideal for cleaning window units as well as small evaporator coils, air cooled condenser coils, metal filters, fan blades and other surfaces soiled with greasy dust and dirt. NSF registered.


Cal-Blast® Cal-Blast is a no rinse condenser cleaner that will powerfully separate undesirable materials from the surface, offering maximum cleaning of finned coils. It’s a high performance aerosol with excellent solvency and blasting spray.




ClenA

ir by Nu-Calgon

Glycometer™All Glycometers have metal body with cushioned eyepiece, focus adjustment, and a rubber hand grip. Included with each is a calibration screwdriver & calibration fluid, a plastic pipette, optical cleaning cloth, and a rugged carrying case.

ClenHands Orange Smoothie™ & Orange Crush™Premium antimicrobial citrus-based hand cleaners that quickly dissolve dirt, grease, fuel oil, pipe dope, resin, ink, paint, glue, rubber gasket and tile cements and many other hard-to-remove soils. Orange Smoothie is a smooth non-pumice formula while Orange Crush is enhanced with fine-ground American pumice. Both are formulated with 9 skin care ingredients including aloe, jojoba, glycerin, wheat germ extract, almond oil, soy oil and vitamins A, C and E to help protect hands. Biodegradable, VOC- compliant in all states, use recyclable packaging and have no petroleum solvents. For use with or without water.

1 gallon bottle Nu-Calgon#6120115 ounce bottle Nu-Calgon#6120215 ounce bottle Nu-Calgon#61203

Elite® Performance Windshield Washer Cleaner -20ºIndependently tested to provide freeze protection to -20ºF.

1 gallon bottle Nu-Calgon#61115

1 each Nu-Calgon#61301

A/C Shine™ Superior Cleaner / ProtectantA/C Shine is specially formulated to clean and protect the painted metal surfaces of outdoor A/C condensing units. It sprays on and wipes off quickly and easily without water. Use A/C Shine on every service call.

12 ounce can Nu-Calgon#61118

PurCool® Green Mini Strip1- Mini Strip Treats Up To 5 Tons. Prevents Slime, Sludge, Odors & Overflows. For prevention of drain pan fouling & overflow in mini splits, fan coil units,”A”coils, window units, and other tight drain pan applications. Can be cut and used with multiple evaporators. Time release formula completely dissolves - leaves no residue. Utilizes unique plant based suspending and dispersing action to prevent blockages from slime & sludge. Lasts up to 6 months!

1 each Nu-Calgon#61044

The Original ClenAir™, CherryAir®, and OrangeAir® Odor NeutralizersRemoves odors quickly and permanently. Originally designed for use in central air systems, on fire and flood restoration jobs and in sewage facilities, ClenAir is a professional product, yet it leaves no lingering antiseptic or perfume smell. Use ClenAir gel to combat stubborn odors, even those that have built up over time like cigarette odor or pet odors. Place gel near the source of the odor or in the return duct of your central air system. Great for musty basements, smoke and water damage as well as pet odors. Available in Original, Cherry, and Orange scent.

1 each Original Nu-Calgon#610001 each Cherry Nu-Calgon#610181 each Orange Nu-Calgon#61028

ClenAir HVAC Odor-Block ®ClenAir HVAC Odor Block is not a perfume mask or cover-up. The formula molecularly reacts with the airborne odor causing compounds and eliminates them and other indoor pollutants leaving clean, fresh, air behind. Eliminates odors caused by mold, mildew, bacteria, pets, smoke, musty odors, water damage, chemicals, animal decay, stale air, garbage areas, sewer gases, skunks, and more! Use in A/C Units, Furnaces, Rooftop Units, Fan Coil Units, and Air Handlers.

Residential Nu-Calgon#61060Commercial Nu-Calgon#61061



Indoor Air Quality

SPRING/SUMMER 2013


Indoor Air QualityAir CleanersAprilaireElectronic Air Cleaner5000

Features: • The Model 5000 is a whole home air cleaner. • Permanently traps and removes 80% of virus-sized particles (0.01 microns) when new. • Traps and permanently removes 94% of bacteria-sized particle (0.35 microns) when new and increases

over lifetime of media. • Recommended airflow is up to 2000 cfm. • Resistance with a new media ranges from 0.10" w.g. (at 1000 cfm) to 0.29" w.g. at 2000 cfm. • Unit operation is completely silent. • No washing of cells required. Beyond replacement of the disposable media, the only maintenance

required is wiping of the ionizing wires and control electrode. • Media replacement is recommended one time per year. • Replacement media is #501 Aprilaire Replacement Media. • 120V AC ±15%. Unit equipped with six-foot grounded cord with plug. • Power usage does not exceed 60 watts. • Outer housing is heavy gauge, preassembled galvanized steel, with an electrostatic painted finish. • Door is closed with a positive mechanical latch. • UL listed. • Warranty is for five years with the exception of the disposable media and inner housing seals.

http://www.aprilairepartners.com

Part Number Filtering MediaArea

Minimum EfficiencyReporting Value

Shipping Weight

Description

5000 72.3 sq. ft. 10 38 lbs. Electronic Media Air Cleaner with One Touch Control

Dimensions (in) A B C D E F G H I

5000 15.50" 28.13" 24.63" 12.00" 31.00" 23.88" 15.50" 18.25" 17.75”

1 Indoor Air Quality 1

Indoor Air QualityAir CleanersAprilaireMedia Air Cleaners1210/1410

Features: • Removes 85% of pollen and mold • Removes 50% dust particles • Permanently traps indoor allergens that can lead to respiratory problems • Simple maintenance just replace the filtering media once per year • Captures Dust, Pollen, Fungi, Mold, Pet Dander • Dust 1 - 3 Microns: 65% • Pollen and Mold Spores 3 - 10 Microns: 85%


Part Number Dimensions Minimum Efficiency Reporting Value Description1210 20" x 25" MERV 11 Media Air Cleaners, 20" x 25", Unpainted Cabinet1410 16" x 25" MERV 11 Media Air Cleaners, 16" x 25", Unpainted Cabinet

2210/2410Features: • Traps 98% of visible airborne dust and other large particles • Permanently captures at least 97% of airborne pollen-sized particles • Provides more than 30 times the filtering media used in standard 1" furnace filters • Requires no maintenance other than the infrequent replacement of filtering media every 1-2 years • Captures Dust, Pollen, Fungi, Mold, Pet Dander • Dust 1 - 3 Microns: 65% • Pollen and Mold Spores 3 - 10 Microns: 85%


Part Number Dimensions Minimum Efficiency Reporting Value Description2210 20" x 25" MERV 13 Media Air Cleaner w/o Control, 20" x 25", Painted Cabinet2410 16" x 25" MERV 13 Media Air Cleaner w/o Control, 16" x 25", Painted Cabinet

3210/3410Features: • Removes 90% of pollen, mold, airborne dust and other large particles • Permanently traps indoor allergens that can lead to respiratory problems • Visibility and control allows you to monitor and control the air cleaner function through the home from a

single, central location • Simple maintenance just replace the filtering media once per year • Event-Based™ Air Cleaning at the push of a button • Choose Allergy, Event, On, Auto or Circ Modes • Clean Air button, Captures Dust, Pollen, Fungi, Mold, Pet Dander • Dust 1 - 3 Microns: 65%, Pollen and Mold Spores 3 - 10 Microns: 85%


Part Number Dimensions Minimum EfficiencyReporting Value

Description

3210 20" x 25" MERV 13 Media Air Cleaner w/ Event Based T-Stat, 20" x 25", Painted Cabinet3410 16" x 25" MERV 13 Media Air Cleaner w/ Event Based T-Stat, 16" x 25", Painted Cabinet


Indoor Air QualityAir CleanersHoneywellElectronic Air CleanerF300

Features: • F300 optimizes efficiency with airflow capturing up to 98% of particles that pass through it. It operates

with all gas, oil and electric forced warm air furnaces and AC systems, and is available in four sizes to fit most ducts, Media post-filter provides enhanced filtration.

• Solid state power supply is self-regulating and maintains peak efficiency during a wide range of cell dirt loading conditions.

• Low-profile door with test button to check system operation. • Helps filter efficiency-robbing "gunk" before it coats critical system parts. • Very low pressure drop, Exclusive 10-year Clean Coil Guarantee. • Rugged zinc-coated, roll-formed cabinet provides superior strength and corrosion protection. • Efficiency Standard: Efficiency ranges are defined for small particles, E1=0.3 to 1.0 microns; medium

particles, E2=1.0 to 3.0 microns; and large particles, E3=3.0 to 10.0 microns., Efficiency ratings are based on American Society of Heating, Refrigerating and Air-Conditioning


Airflow CapacityPart Number cfm m³/hr Dimensions DescriptionF300E1019 Max.- 1400 Max.- 2380 16" x 25" Electronic Air Cleaner, 16" x 25"F300E1035 Max.- 2000 Max.- 3400 20" x 25" Electronic Air Cleaner, 20" x 25"

Enhanced Air CleanerTrueCLEAN Enhanced Air Cleaner

Features: • The Honeywell TrueCLEAN Air Cleaner is for use in return air ducts of a forced air system. • It provides high filtration performance while destroying contaminants and treats the air stream through a

three-step process: Charge, Capture, and Destroy. • Efficiency Standard: Efficiency ranges are defined for small particles, E1=0.3 to 1.0 microns; medium

particles, E2=1.0 to 3.0 microns; and large particles, E3=3.0 to 10.0 microns. Efficiency ratings are based on American Society of Heating, Refrigerating and Air-Conditioning


Airflow CapacityPart Number cfm m³/hr Dimensions Type of Air Cleaner DescriptionFH8000A1620 Max.- 1350 Max.- 3000 16" x 20" Enhanced Air Cleaner TrueCLEAN Enhanced Air Cleaner, 16" x 20"FH8000A2020 Max.- 1800 Max.- 3060 20" x 20" Enhanced Air Cleaner TrueCLEAN Enhanced Air Cleaner, 20" x 20"FH8000A2520 Max.- 2000 Max.- 3400 25" x 20" Enhanced Air Cleaner TrueCLEAN Enhanced Air Cleaner, 25" x 20"FH8000F1625 Max.- 1600 Max.- 2720 16" x 25" Enhanced Air Cleaner TrueCLEAN Enhanced Air Cleaner, 16" x 25"FH8000F2025 Max.- 2000 Max.- 3400 20" x 25" Enhanced Air Cleaner TrueCLEAN Enhanced Air Cleaner, 20" x 25"


Indoor Air QualityAir CleanersHoneywellMedia Air CleanerF100

Features: • The F100F Media Air Cleaner captures a significant amount of the airborne particles in the air circulated

through the unit • Recommended as a basic minimum air quality product. Includes; cabinet, access door and FC100A

pleated media filter, High efficiency media filter captures particles as small as 0.3 microns. • Applicable to all gas, oil and electric forced air furnaces and to compressor cooling up to 5 tons. • Mounts in the return air duct., Quick and easy media filter replacement. • Rugged zinc-coated, roll-formed cabinet resists corrosion and can support weight of residential furnace

and evaporator coil, Requires no electrical connections, Mounts in any position. • Requires no maintenance except periodic media filter replacement. • Includes FC100A Filter. No AIRWATCH Indicator. Dealer Private Labeling Available • Later upgrade to higher performing media or electronic air cleaner is easy • Efficiency Standard: Efficiency ratings are based on American Society of Heating, Refrigerating and Air-

Conditioning Engineers Standard 52.2-1999.,Efficiency ranges are defined for small particles, E1=0.3 to 1.0 microns; medium particles, E2=1.0 to 3.0 microns; and large part


Airflow CapacityPart Number cfm m³/hr Dimensions Type of Air Cleaner DescriptionF100F2002 Max.- 1400 Max.- 2380 16" x 25" Media Air Cleaner Entry Level 16" x 25" Media Air Cleaner, 4" Extended MediaF100F2010 Max.- 2000 Max.- 3400 20" x 25" Media Air Cleaner Entry Level 20" x 25" Media Air Cleaner, 4" Extended MediaF100F2036 Max.- 1400 Max.- 2380 20" x 20" Media Air Cleaner Entry Level 20" x 20" Media Air Cleaner, 4" Extended Media

F200Features: • F200E Media Air Cleaner captures a significant amount of airborne particles from the air circulated

through the unit • The high efficiency F200E Media Air Cleaner includes cabinet, access door, media filter, and Air watch

Indicator, W8600B RF AIRWATCH filter change indicator included. • Integral pressure sensors signal when filter change is required based on increased pressure drop

threshold at filter, Filter change status is transmitted to wall-mounted RF AIRWATCH Indicator. • High efficiency charged-media filter captures particles as small as 0.3 microns. • Applicable to all gas, oil and electric forced air furnaces and to compressor cooling up to 5 tons. • Mounts in the return air duct., Quick and easy media filter replacement. • Rugged zinc-coated, roll-formed cabinet resists corrosion and can support weight of residential furnace

and evaporator coil, Requires no electrical connections., Mounts in any position. • Requires no maintenance except periodic media filter replacement. • Later upgrade to higher performing media or electronic air cleaner is easy. • Efficiency Standard: Efficiency ratings are based on American Society of Heating, Refrigerating and Air-



Airflow CapacityPart Number cfm m³/hr Dimensions Type of Air Cleaner DescriptionF200E1029 Max.- 1400 Max.- 2380 16" x 25" Media Air Cleaner Media Air Cleaner, 16" x 25", with W8600BF200E1037 Max.- 2000 Max.- 3400 20" x 25" Media Air Cleaner Media Air Cleaner, 20" x 25", with W8600B


Indoor Air QualityBath and Ventilation FansBroanBath Fan Upgrade Kit

Features: • The BROAN bath fan upgrade kit lets you convert your old bath fan to a brand new unit in just 10

minutes. Improve performance, reduce the sound level and upgrade the appearance of your economy fan in minutes.

• Upgrading bath fan performance is easy with our all-in-one kit. NO rewiring. NO new duct work. NO hassles. ALL in just 10 minutes!

• New motor (60 CFM and 3.0 Sones) reduces sound up to 50%, improves air movement up to 20% and helps control humidity that causes mold and mildew.

• New Grille: Upgrade your bathroom's look with a modern white grille. • Wrench: No special tools are required. The kit has everything you need including new components, a

wrench, fasteners, and complete step-by-step instructions. • Two motor plates included to fit most economy fans.

http://www.broan.com

Part Number CFM Amps Color Duct Size Sones Weight (lbs) Description690 60 @ 0.10" ps 1.2 White 3" 3 4.7 Bathroom Fan Upgrade Kit, 60 CFM, 3.0 Sones

Ceiling Mount Ventilation FanFeatures: Grille: • Attractive grille conceals interior • Matte white polymeric - blends well with any decor • Torsion spring grille mounting - no tools required • White, metal grille kit available (purchase separately) Blower: • Plug-in, permanently lubricated motor, Centrifugal blower wheel Housing: • Rugged, 26-gage galvanized steel construction • Sturdy key-holed mounting brackets for quick, accurate installation • Tapered, polymeric duct fitting with built-in backdraft damper for easy, positive duct connection and no

metallic clatter Certifications • UL Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit • HVI2100 Certified Warranty • 1-Year Warranty


Part Number CFM Amps Color Duct Size Sones Weight (lbs) Description676 110 @ 0.10" ps 1.3 White 4" 4 7 Ceiling Mount Ventilation Fan, White

Polymeric, 110 CFM, 4 Sones684 80 @ 0.10" ps,

68 @ 0.25" ps0.5 White 4" 2.5 6.5 Ceiling Mount Ventilation Fan, White

Polymeric, 80 CFM, 2.5 Sones


Indoor Air QualityBath and Ventilation FansBroanCeiling/Wall Mount Ventilation Fan

Features: Grille: • White polymeric - blends well with any décor. • Torsion spring grille mounting - no tools required • Metal grille kit available - (purchase separately) Motor: • Plug-in, permanently lubricated. • Broan-designed polymeric blower wheel • Snap in/out motor assembly for easy cleaning - no screws to drive or drop Housing: • Compact, 25 gage galvanized steel - attaches easily to wall or ceiling joists • Double strength mounting flanges with keyhole slots. • No electrical knockout to remove • Removable wiring cover - make connections away from tight corners • Polymeric duct fitting with tapered sleeve for easy, positive duct connection • Quiet polymeric damper prevents cold backdrafts – no metallic clatter Certifications • UL Listed for use over bathtubs or showers when connected to a GFCI circuit Warranty • 1-Year Warranty


Part Number CFM Amps Color Duct Size Sones Weight (lbs) Description670 50 @ 0.10" ps 0.8 White 3" 3.5 4 Ceiling/Wall Mount Ventilation Fan, White

Polymeric, 50 CFM, 3.5 Sones671 70 @ 0.10" ps 1.2 White 3" 6 3.75 Ceiling/Wall Mount Ventilation Fan, White

Polymeric, 70 CFM, 6 Sones689 60 @ 0.10" ps 1.5 White 3" 5.5 3.5 Ceiling/Wall Mount Ventilation Fan, White

Polymeric, 60 CFM, 5.5 Sones


Indoor Air QualityBath and Ventilation FansBroanLoSone Select Ceiling Mount VentilatorsFeatures Grille: • Conceals interior, Low profile styling blends with any decor • White polymeric (“MG” models - metal, finished with white painted enamel) Blower: • Low RPM for quiet operation, Resilient anti-vibration mounts • Dynamically-balanced, polymeric, centrifugal blower wheel for quiet, efficient performance • Permanently lubricated, thermally protected motor • Plug-in motor rated at 120 VAC, Designed for continuous operation Housing: • Rugged, 20 gauge galvanized steel, 1/2” acoustic insulation inside • May be installed in ceiling or wall (size permitting) • 8-position mounting brackets for easy installation and greater adaptability to various mounting requirements • Automatic backdraft damper located within duct connector • Factory-shipped in horizontal discharge position - easily converted to vertical discharge Certifications • UL Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling mount only) Warranty • 1-Year Warranty


High Capacity Fans - Rectangular Duct, Single ImpactPart Number CFM Color Duct Size Sones Weight

(lbs)Description

L900 905 @ 0.10" ps, 877@ 0.25" ps, 901 @

0.125" ps

White 8" x 12" 4.1 64.2 Ceiling Mount Ventilation Fan with 8" x12" Rectangular Duct, White Metal, 901CFM, 4.1 Sones, 120V

High Capacity Fans - Rectangular Duct, Double ImpactPart Number CFM Color Duct Size Sones Weight

(lbs)Description

L500 520 @ 0.10" ps, 491@ 0.25" ps, 514 @

0.125" ps

White 4-1/2" x 18-1/2" 3.3 33.8 Ceiling Mount Ventilation Fan with4-1/2" x 18-1/2" Rectangular Duct,White Metal, 514 CFM, 3.3 Sones, 120V

High Capacity Fans - Round Duct, Single ImpactPart Number CFM Color Duct Size Sones Weight

(lbs)Description

L100 115 @ 0.10" ps, 93 @0.25" ps, 109 @

0.125" ps

White 6" 0.9 22.8 Ceiling Mount Ventilation Fan with 6"Round Duct, White Polymeric, 109CFM, 0.9 Sones, 120V

L150 161 @ 0.10" ps, 141@ 0.25" ps, 157 @

0.125" ps


L200 214 @ 0.10" ps, 196@ 0.25" ps, 210 @

0.125" ps

White 8" 1.7 23 Ceiling Mount Ventilation Fan with 8"Round Duct, White Polymeric, 210CFM, 1.7 Sones, 120V

L250 261 @ 0.10" ps, 250@ 0.25" ps, 259 @

0.125" ps


L300 309 @ 0.10" ps, 303@ 0.25" ps, 308 @

0.125" ps



Indoor Air QualityBath and Ventilation FansBroanQuite Bath Fan with HeaterQTX-HL

Features: Grille • White polymeric grille • Snap-in light diffusing lens for (2) 60W bulbs and 7W night light (not included) Ventilator • Resilient anti-vibration mounts, Plug-in, permanently lubricated motor • Low sound, high performance blower wheel • Polymeric, 6" round damper/duct connector - for optimal performance - with 1-1/8" long tapered sleeve

and no metallic clatter Heater • 1500 watts, with metal blower wheel for efficient, even heating • Plug-in, permanently lubricated motor - functions independent of ventilator Housing • Rugged galvanized steel housing, Adjustable mounting brackets span up to 24" • Suitable for use in insulated ceilings (Type I.C.). • Use Model 77DV (Ivory) / 77DW (White) Four Function Control Certifications • HVI2100 Certified Warranty • 3-Year Warranty


Part Number CFM Color Duct Size Sones Weight (lbs) DescriptionQTX110HL 110 @ 0.10" ps,

84 @ 0.25" psWhite 6" 0.9 24 110 CFM Very Quiet 0.9 Sones Fan with 1500W Heater,

2-60W Incandescent Light and 7W Night-Light (Bulbs notIncluded), Recommend 77 Series Switch, 0.9 Sones

Ventilation Fans-LightsFeatures: • Broan features classic ventilation fan/light combinations which easily fit any décor. 50 CFM 2.5 Sones • Bright 100-watt lighting capacity. Bulb not included, Shatter-resistant light diffusing lens • Type IC (Insulation Contact). Quality Broan features and easy installation make this an extremely popular

series, Designer styled white polymeric grille complements virtually any decor • Plug-in, permanently lubricated motor, Efficient polymeric fan impeller. • UL listed for use over bathtubs and showers when connected to a GFCI-protected branch circuit • Polymeric duct connectors with tapered sleeves for easy, positive ducting • All models are available in single packs or Project Paks, Mounting ears offer quick, sturdy installation • Use with Model 68W (White) or 68V (Ivory) two-function control (available separately)


Part Number CFM Color Duct Size Sones Weight (lbs) Description678 50 @ 0.10" ps,

39 @ 0.25" psWhite 4" 2.5 5.6 Ventilations Fan/Light, White Polymeric, 50 CFM, 2.5 Sones


Indoor Air QualityBath FansBroanENERGY STAR Qualified Quiet Bath FanModel QTRE

Features: Blower: • Plug-in, permanently lubricated motor - engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Low RPM for quiet operation, Resilient anti-vibration motor mounts (QTR080 only) Housing: • Rugged, 26 gauge, galvanized steel construction • Polymeric, 4” round duct connector with tapered sleeve and no metallic clatter • 7-5/8” height allows for 2” x 8” (nominal) joist installations, Sturdy, easy mounting directly to joist • Includes hanger bars to position housing anywhere between 16” to 24”-on-center joists; (Models

QTRE080 & QTRE110 only) • Includes mounting frame for easy retrofit or replacement of existing fan (QTRE808R only) Grille: • Polymeric construction • Innovative design - the result of extensive research with designers and consumers Certifications • HVI Certified • UL Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling

mount only), Energy Star qualified Warranty • 3-Year Warranty


Part Number CFM Color Duct Size Sones Weight (lbs) DescriptionQTRE080 80 @ 0.10" ps,

55 @ 0.25" psWhite 4" 0.8 12.4 ENERGY STAR Qualified Very Quiet Bath Fan, White

Polymer Grille, 80 CFM, 0.8 SonesQTRE110 110 @ 0.10" ps,

90 @ 0.25" psWhite 4" 1.3 11.8 ENERGY STAR Qualified Quiet Bath Fan, White Polymer

Grille, 110 CFM, 1.3 Sones


Indoor Air QualityBath FansBroanENERGY STAR Qualified Quiet Bath FanModel QTXE

Features: Blower: • Plug-in, permanently lubricated motor - engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Maintains a high percentage of rated CFM in less than ideal installations • Low RPM for quiet operation, Resilient anti-vibration motor mounts (QTXE150 only) Housing: • Rugged, 26 gauge, galvanized steel construction, 6” round ducting for superior performance • Polymeric duct connector with tapered sleeve and no metallic clatter • 7-5/8” height allows for 2” x 8” (nominal) joist installations, Sturdy, easy, four-point mounting directly to

joist, Includes unique spacer (patent pending) for mounting to engineered “I” joists • Includes hanger bars to position housing anywhere between 16” to 24”-on-center joists; for Easy, Fast

and Universal installation in all types of construction • Two sets of mounting holes for hanger bars allow flush installation with bottom or top of drywall • Can be mounted in ceilings up to 12/12 pitch, Mounting brackets includes Grille: • Polymeric construction • Innovative design - the result of extensive research with designers and consumers Certifications • HVI Certified • UL Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling



Part Number CFM Color DuctSize

Sones Weight(lbs)

Description

QTXE080 80 @ 0.10" ps,55 @ 0.25" ps

White 6" 0.3 @ 0.10" ps 12 ENERGY STAR Qualified Very Quiet Bath Fan, WhitePolymer Grille, 80 CFM, 0.3 Sones

QTXE110 110 @ 0.10" ps,90 @ 0.25" ps

White 6" 0.7 @ 0.10" ps 12 ENERGY STAR Qualified Very Quiet Bath Fan, WhitePolymer Grille, 110 CFM, 0.7 Sones

QTXE150 150 @ 0.10" ps,137 @ 0.25" ps

White 6" 1.4 @ 0.10" ps 12 ENERGY STAR Qualified Quiet Bath Fan, White PolymerGrille, 150 CFM, 1.4 Sones


Indoor Air QualityBath FansBroanENERGY STAR Qualified Quiet Humidity Sensing FanModel QTRE

Features Blower • Plug-in, permanently lubricated motor – engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Maintains a high percentage of rated CFM in less than ideal installations, Low RPM for quiet operation Housing • Rugged, 26 gauge, galvanized steel construction, 4” round ducting for superior performance • 7-5/8” height allows for 2” x 8” (nominal) joist • Polymeric duct connector with tapered sleeve and no metallic clatter Installations • Sturdy, easy, four-point mounting directly to joist • Includes unique spacer (patent pending) for mounting to engineered “I” joists • Includes hanger bars to position housing anywhere between 16” to 24”-on-center joists • Two sets of mounting holes for hanger bars allow flush installation with bottom or top of drywall Grille • Polymeric construction Innovative design - the result of extensive research with designers & consumers Certifications • HVI Certified, UL Listed for use over bathtubs or showers when connected to a GFCI circuit Warranty • 3-Year Warranty


Part Number CFM Color Duct Size Sones Weight (lbs) DescriptionQTRE100S 100 @ 0.10" ps,

81 @ 0.25" psWhite 4" 1.5 12.6 ENERGY STAR Qualified Quiet Humidity Sensing Fan,

White Polymeric, 100 CFM, 1.5 Sones

ENERGY STAR Qualified Ventilation FanModel 784

Features Grille: • Engineered resin construction, Low-profile blends well with any décor. • Torsion spring grille mounting - no tools required Blower: • Plug-in, permanently lubricated motor, Designed for continuous operation Housing: • Integral key-holed mounting brackets for easy, secure installation directly to joist • Provision for wire suspension when installed in a drop ceiling • 4-inch round, tapered, polymeric duct fitting with built-in backdraft damper for easy, positive duct

connection and no metallic clatter, Rugged, 26-gage galvanized steel construction Certifications • U.L. Listed for use over bathubs and showers when connected to a GFCI protected branch circuit • HVI Certified Warranty • 1-Year Warranty


Part Number CFM Color Duct Size Sones Weight (lbs) Description784 80 @ 0.10" ps,

65 @ 0.25" psWhite 4" 2 7 ENERGY STAR Qualified Ventilation Fan, White Polymeric,

80CFM, 2.0 Sones


Indoor Air QualityBath FansBroanENERGY STAR Qualified Very Quiet Bath Fan with LightsModel QTXE-FLT

Features: Blower: • Plug-in, permanently lubricated motor - engineered for continuous operation • Dynamically balanced centrifugal blower wheel for quiet, efficient performance • Maintains a high percentage of rated CFM in less than ideal installations • Low RPM for quiet operation, Resilient anti-vibration motor mounts (QTXE150FLT only) Housing: • Rugged, 26 gauge, galvanized steel construction • Polymeric duct connector with tapered sleeve and no metallic clatter • Sturdy, easy, four-point mounting directly to joist • Includes unique spacer (patent pending) for mounting to engineered “I” joists • Includes hanger bars to position housing anywhere between 16” to 24”-on-center joists • Two sets of mounting holes for hanger bars allow flush installation with bottom or top of drywall • Can be mounted in ceilings up to 12/12 pitch Grille: • Polymeric construction • Innovative design - the result of extensive research with designers and consumers Certifications • HVI Certified • UL Listed for use over bathtubs and showers when connected to a GFCI protected branch circuit (ceiling



Part Number CFM Color DuctSize

Sones Weight(lbs)

Description

QTXE080FLT 80 @ 0.10" ps,55 @ 0.25" ps

White 6" 0.3 16.2 ENERGY STAR Qualified Very Quiet Bath Fan/Light 36W FluorescentLighting, 4W Nightlight, 80 CFM. Title 24 Compliant, 0.3 Sones

QTXE110FLT 110 @ 0.10" ps,90 @ 0.25" ps

White 6" 0.7 15.8 ENERGY STAR Qualified Very Quiet Bath Fan/Light 36W FluorescentLight, 4W Nightlight, 110 CFM. Title 24 Compliant, 0.7 Sones


Indoor Air QualityDehumidifiersAprilaireFree Standing DehumidifierModel 1710A

Features: • Air Filtration - MERV 8 filter included, Automatic Humidity Sensing • Systems Status On-board LED status, providing instant, easily understood feedback / validation on

the unit's operation and performance, Fault Indicator System Option Built-in Ventilation • Brings in outside air for ventilation of the home to ASHRAE 62.2 2007 standard. • In hot, humid climates, supplemental dehumidification of fresh air beyond standard HVAC equipment is

recommended. • The most efficient means to dehumidify air is upon initial entry into the home instead of after the home

is loaded. • Monitors HVAC fan run time during cooling and/or heating calls to efficiently ventilate the whole home,

and automatically monitor/control the humidity of the incoming air; utilizes dehumidifier and HVAC fan to make up any remaining ventilation required based on chosen set point.

• Optional outdoor temperature sensor can be used if no fresh air is desired above 100°F or below 0°F (utilizing this will ignore ASHRAE 62.2 2007 standard).


Part Number Capacity Duct Size Power Weight (lbs) Description1710A 90 Pints/Day 8" Round 120VAC, 60 Hz, 8.1A 93 Stand-Alone Dehumidifier, 90 Pints/Day

Whole-House DehumidifiersModel 1730A

Features: • Air Filtration - MERV 8 filter included, Automatic Humidity Sensing • Systems Status On-board LED status, providing instant, easily understood feedback / validation on the

unit's operation and performance, Fault Indicator System Option Built-in Ventilation • In hot, humid climates, supplemental dehumidification of fresh air beyond standard HVAC equipment is

recommended. • The most efficient means to dehumidify air is upon initial entry into the home instead of after the home

is loaded, Brings in outside air for ventilation of the home to ASHRAE 62.2 2007 standard. • Monitors HVAC fan run time during cooling and/or heating calls to efficiently ventilate the whole home,



Added Features • Small cabinet size - fits tight spaces - 12.5"W x 14.5"H x 22"L, Status Light - System power and fault

indicator, Merv 8 air filtration, Light weight - one person transport - 65 lbs • Universal placement dehumidistat, Plug-in Terminals - easy quick outside wiring to board Components included • Backflow damper - attached to the unit - no additional install time, Blower activation controls • Adjustable outlet options - duct collar is adjustable for top or side discharge application • Model 76 Living Space Dehumidistat, Drain pan


Part Number Capacity Duct Size Power Weight (lbs) Description1730A 65 Pints/Day 8" Round 120VAC, 60 Hz, 7A 65 Whole-House Dehumidifiers, 65 Pints/Day


Indoor Air QualityDehumidifiersAprilaireWhole-House DehumidifiersModel 1750A

Features: • Air Filtration - MERV 8 filter included, Automatic Humidity Sensing • Systems Status On-board LED status, providing instant, easily understood feedback / validation on the

unit's operation and performance. Built-in Ventilation • In hot, humid climates, supplemental dehumidification of fresh air beyond standard HVAC equipment is

recommended, Brings in outside air for ventilation of the home to ASHRAE 62.2 2007 standard. • The most efficient means to dehumidify air is upon initial entry into the home instead of after the home is

loaded. • Monitors HVAC fan run time during cooling and/or heating calls to efficiently ventilate the whole home,



System Option • Air Cycling, Ventilation, HVAC fan on with dehumidifier • System Power, Fault Indicator with self-diagnostics


Part Number Capacity Duct Size Power Weight (lbs) Description1750A 90 Pints/Day 8" Round 120VAC, 60 Hz, 8.1A 93 Whole-House Dehumidifiers, 90 Pints/Day

Model 1770AFeatures: • Air Filtration - MERV 8 filter included, Automatic Humidity Sensing • Systems Status On-board LED status, providing instant, easily understood feedback / validation on the

unit's operation and performance. Built-in Ventilation • In hot, humid climates, supplemental dehumidification of fresh air beyond standard HVAC equipment is

recommended, Brings in outside air for ventilation of the home to ASHRAE 62.2 2007 standard. • The most efficient means to dehumidify air is upon initial entry into the home instead of after the home is

loaded. • Monitors HVAC fan run time during cooling and/or heating calls to efficiently ventilate the whole home,



System Option • Air Cycling, Ventilation, HVAC fan on with dehumidifier • System Power, Fault Indicator with self-diagnostics


Part Number Capacity Duct Size Power Weight (lbs) Description1770A 135 Pints/Day 10" Round 120VAC, 60 Hz, 14.5A 100 Whole-House Dehumidifiers, 135 Pints/Day


Indoor Air QualityDehumidifiersHoneywellHumidity ControllersTrueIAQ Digital IAQ Control

Features: • Integrate control of your humidification, dehumidification, ventilation and bathroom fans with Honeywell's

TrueIAQ control. • TrueIAQ automatically adjusts humidity settings and provides maintenance reminders for peak efficiency.


Part Number Color Type Voltage DescriptionDG115EZIAQ White Steam Humidifier 24 Vac TrueIAQ Digital IAQ Control, 1.1°C-40°C, 24V, Steam Humidifier Type, White

Whole House DehumidifierDR65A2000

Features: • The Honeywell TrueDRY DR65 ensures the home is maintained at proper humidity levels through it high

performance and efficiency. • Removes up to 65 pints (30.8 l) of water per day from the indoor air. • Built-in humidity control requires no additional wiring to an external control. Just plug in and go! Choice

of external control options also available for centrally ducted control. • Energy Star rated.


Part Number Amps Capacity Color OperatingHumidity Range

PlenumOpening Size

TemperatureRange (°F)

Voltage Description

DR65A2000 5.2 8.12Gallons/Day

White 0-99% RH 8" 34°F to 135°F 120 V TrueDRY DR65 65-pint Whole HouseDehumidifier

DR90A2000Features: • The Honeywell TrueDRY DR90 ensures the home is maintained at proper humidity levels through its

high performance and efficiency. • Removes up to 90 pints (30.8 l) of water per day from the indoor air. • Built-in fresh air supply • Energy Star rated.


Part Number Amps Capacity Color OperatingHumidity Range

PlenumOpening Size

TemperatureRange (°F)

Voltage Description

DR90A2000 6.3 11.25Gallons/Day

White 0-99% RH 10" 34°F to 135°F 120 V TrueDRY DR90 90-pint Whole HouseDehumidifier


Indoor Air Quality Disposable Air FiltersFlandersEZ Flow & EZ Flow II

Features: • EZ Flow and EZ Flow II disposable filters are designed for protection of furnace and central air units in

residential and light commercial applications. • Construction of both models is identical except for the media retainer. • The EZ Flow features a metal media retainer on the downstream side while the EZ Flow II has no media

retainer. • Instead, the media itself is adhered directly to the frame for non-metallic applications. • One-piece frame. • UL 900 Class 2. • UPC marked. • No media retainer on E2 Flow II. • Metal media retainer on EZ Flow.

http://www.flanderscorp.com/industrial/pleated_filters.php

NominalPart Number Size Depth (In) Actual Size H x W x D

(In)cfm @

300 fpmStandard

Carton QtyWeight per

Carton (Lbs)Description

FCTY1420 14" x 20" x 1" 1" 13-7/8 x 19-7/8 x 3/4 583 12 6.2 14" x 20" x 1" Disposable Air FilterFCTY11425 14" x 25" x 1" 1" 13-7/8 x 24-7/8 x 3/4 729 12 7.7 14" x 25" x 1" Disposable Air FilterFCTY11620 16" x 20" x 1" 1" 15-3/4 x 19-1/2 x 3/4 667 12 6.9 16" x 20" x 1" Disposable Air FilterFCTY11625 16" x 25" x 1" 1" 15-3/4 x 24-5/8 x 3/4 833 12 8.3 16" x 25" x 1" Disposable Air FilterFCTY12020 20" x 20" x 1" 1" 19-5/8 x 19-5/8 x 3/4 833 12 7.9 20" x 20" x 1" Disposable Air FilterFCTY12025 20" x 25" x 1" 1" 19-5/8 x 24-5/8 x 3/4 1042 12 9.5 20" x 25" x 1" Disposable Air FilterFCTY12424 24" x 24" x 1" 1" 23-7/8 x 23-7/8 x 3/4 1200 12 11.3 24" x 24" x 1" Disposable Air FilterFCTY12525 25" x 25" x 1" 1" 24-7/8 x 24-7/8 x 3/4 1302 12 13.5 25" x 25" x 1" Disposable Air FilterFCTY21420 14" x 20" x 2" 2" 13-7/8 x 19-7/8 x 1-5/8 584 12 9.1 14" x 20" x 2" Disposable Air FilterFCTY21425 14" x 25" x 2" 2" 13-7/8 x 24-7/8 x 1-5/8 730 12 10.5 14" x 25" x 2" Disposable Air FilterFCTY21620 16" x 20" x 2" 2" 15-3/4 x 19-1/2 x 1-5/8 667 12 9.6 16" x 20" x 2" Disposable Air FilterFCTY21625 16" x 25" x 2" 2" 15-3/4 x 24-1/2 x 1-5/8 834 12 11.6 16" x 25" x 2" Disposable Air FilterFCTY22020 20" x 20" x 2" 2" 19-1/2 x 19-1/2 x 1-5/8 834 12 11.9 20" x 20" x 2" Disposable Air FilterFCTY22025 20" x 25" x 2" 2" 19-1/2 x 24-1/2 x 1-5/8 1042 12 14 20" x 25" x 2" Disposable Air FilterFCTY22424 24" x 24" x 2" 2" 24-7/8 x 24-7/8 x 1-5/8 1302 12 17.2 24" x 24" x 2" Disposable Air FilterFCTY22525 25" x 25" x 2" 2" 23-1/2 x 23-1/2 x 1-5/8 1200 12 16 25" x 25" x 2" Disposable Air FilterManufacturing tolerances are +0 in., -1/8 in. on height and width. Nominal cfm is calculated at 300 fpm gross face velocity. Typical initial (clean) pressure drop at nominal cfm is 0.07 in. w.g. for 1 in. filters and 0.10 in. w.g. for 2 in. filters. Recommended final resistance is 0.50 in. w.g., but the system design may dictate a lower changeout point.


Indoor Air QualityHeat Recovery VentilatorHoneywellTrueFRESH SystemsTrueFRESH ERV and HRV

Honeywell’s Balanced Ventilation Systems is a True Time Saver. Honeywell’s Balanced Ventilation Systems eliminate need for overhead ducting, balance without adjusting dampers, and change everything when it comes to time-consuming installation. Features: • Removable Duct Collars • Simplified Balancing • Adjustable Hanging Straps • Centralized Wiring and Speed Control • Customizable • Compact Size • ENERGY STAR® Rated • Meets ASHRAE 62.2 Standards • 5-Year Warranty


Part Number Airflow Capacity (cfm) Current Draw Voltage DescriptionVNT5150H1000 150 cfm at External Static

Pressure 0.4 in. wc1.5A 120 V TrueFRESH 150 cfm Heat Recovery Ventilator

Indoor Air Quality HumidifiersAprilaireWater HumidifiersBypass & Power-Fan Humidifiers - Model 400

The Model 400 bypass humidifier is a high-capacity, water-conserving humidifier (0.70 gallons evaporated per hour) incorporating a water recirculation system for use where drain facilities are not accessible or available. It uses 100% of the water that goes into the unit. Automatically adjust humidity levels based upon outside air temperature with remote sensing bulb. Humidifies up to 4,000 square feet if your home is tight in construction. The Model 400 is also a good choice for homes with heat pumps. Due to lower plenum temperatures the unit should be connected to your hot water supply line. This humidifier can be installed on the supply or return air ductwork. It is also left or right side reversible. Included are a saddle valve, automatic humidistat control w/ sensing bulb and installation and operating instructions. This unit includes a 110v to 24v transformer.

Other items needed for the installations that are not included: 1/4" copper tubing for water line, 6" round ducting & elbow for bypass air, 2-conductor 18 to 22 gauge wire.


WaterPart Number Bypass Duct

DiameterDimensions Electrical

RequirementsCapacity Feed Rate Description

400 6" 14-3/8" H x 15" W 24 Volts 17 Gallons/Day 3 Gallons/Hour 24v Drainless Bypass Model with AutomaticControl (Large Homes)



The Aprilaire Automatic Humidifier Model 500A is the economy version of the 600A intended for use in smaller homes. It takes humidifier innovation to the next level and performs as good as it looks! It offers all of the performance benefits of Aprilaire's more advanced humidifiers including Automatic Digital Control which automatically adjusts humidity based on outside temperature. The Aprilaire 500A is easier than ever to install because it includes a built-in bypass damper, which means fewer parts to install. Plus, the damper is conveniently labeled for summer and winter settings, allowing you to set it for the entire season with no guesswork involved. This humidifier can be installed on the supply or return air ductwork. It is also left or right side reversible. Includes automatic digital control humidistat, sensing bulb, water pad, 110v to 24v transformer and manufacturer's special instructional DVD. Features: • Shows that the humidifier is operating, Allows you to check relative humidity level • Tells you when it's time to change the water panel, Gives you service alerts Other items needed for the installation that are not included: 1/4" copper tubing for water line, 1/2" ID plastic tubing for drain, 6" round ducting & elbow for bypass air, 2-conductor 18 to 22 gauge wire.





500 6" 13" H x 15-31/50"W

24 Volts 16 Gallons/Day 3 Gallons/Hour 24v Bypass Model w/ Automatic Digital Control& Humidity Readout

Bypass & Power-Fan Humidifiers - Model 600The Aprilaire Automatic Humidifier Model 600A is the newest addition to the aprilaire humidifier line. It takes humidifier innovation to the next level and performs as good as it looks! It offers all of the performance benefits of Aprilaire's more advanced humidifiers including Automatic Digital Control which automatically adjusts humidity based on outside temperature. The Aprilaire 600A is easier than ever to install because it includes a built-in bypass damper, which means fewer parts to install. Plus, the damper is conveniently labeled for summer and winter settings, allowing you to set it for the entire season with no guesswork involved. This humidifier can be installed on the supply or return air ductwork. It is also left or right side reversible. Includes automatic digital control humidistat, sensing bulb, water pad, 110v to 24v transformer and manufacturer's special instructional DVD. Features: • Shows that the humidifier is operating, Allows you to check relative humidity level • Tells you when it's time to change the water panel, Gives you service alerts Other items needed for the installation that are not included: 1/4" copper tubing for water line, 1/2" ID plastic tubing for drain, 6" round ducting & elbow for bypass air, 2-conductor 18 to 22 gauge wire.





600 6" 15-3/4" H x15-19/50" W

24 Volts 17 Gallons/Day 3Gallons/Hour

24v Bypass Model w/ Automatic Digital Control& Humidity Readout



The Model 700A power fan humidifier (replaces Models 700, 760, and 768) features truly automatic digital control so there's no need to ever manually control the humidifier. It is also designed with ease of service in mind. It utilizes an outdoor temperature sensor for monitoring even the slightest changes in outdoor temperature. This high-tech humidification system can deliver up to 50% more moisture in comparison to competitive units. Complementing any HVAC system, the 700A has an evaporation capacity of 0.75 gallons per hour, among the highest capacity humidifiers sold. If you own a larger home and want the best, then this may be the humidifier for you, as it will handle up to 4,200 square feet if your home is tight in construction. Includes automatic digital control humidistat, sensing bulb, water pad and manufacturer's special instructional DVD. Features: • Shows that the humidifier is operating, Allows you to check relative humidity level • Tells you when it's time to change the water panel, Gives you service alerts Other items needed for installation that are not included: 1/4" copper tubing for water line, 1/2" ID plastic tubing for drain, 2-conductor 18 to 22 gauge wire.


WaterPart Number Dimensions Evaporator

CapacityCapacity Feed Rate Description

700 18" H x 15-9/10" W .75 Gallons/Hour 18 Gallons/Day 6 Gallons/Hour 110v Power Fan Humidifier w/ Automatic DigitalControl & Humidity Readout

Steam Humidifiers - Model 800The Aprilaire Model 800 Canister Steam Humidifier delivers humidity in the form of steam to the conditioned space via the HVAC system ducting. The humidifier generates steam by energizing two electrodes that extend into a canister of water. Current flowing between the electrodes causes the water to boil, creating steam. Water is introduced to the humidifier through a fill valve to a fill cup located in the top of the cabinet. The fill cup serves as an overflow reservoir and provides an air gap between the humidifier and water source. The drain and fill valves work together to maintain water level in the canister to deliver the rated steam capacity based on the electrical conductivity of the water and to temper drain water. Steam is delivered into the airstream through a dispersion tube mounted in the HVAC system ductwork. Openings in the dispersion tube are fitted with “tubelets” which extend into the center of the tube. The design of the dispersion tube and tubelets distribute steam over a wide area in the duct and direct any condensed moisture back into the steam hose.

Standard Features: • Electrode technology - proven more effective to generate steam; requires no cleaning. • Easy installation - remote or duct mount applications with no additional accessories. • Easy to maintain - simply remove canister and replace. • Dispersion technology prevents condensation in the duct. • Drain water flushes with fresh inlet water, Can be used with any condensate pump. • Water filtration never required. • Steam capacity: 120 Volts - 11.5 GPD; 208 Volts - 20.5 GPD; 240 Volts - 23.3 GPD. • Includes Aprilaire Model 62 digital control, 6' of commercial grade steam hose, 10' of drain hose, and 1

dispersion tube.


Part Number Dimensions Electrical Requirements Gallons per Day Description800 20-7/8" H x 10-1/8" W

x 7-1/8" D120 & 208 & 240 Volts 23.3 gallons 23.3 GPD, 120 / 208 / 240 Volt, Model 800 Canister

Steam Humidifier with Digital Humidifier Control


Indoor Air QualityHumidifiersHoneywellEvaporative HumidifiersFeatures:• Versatile fit designed for more jobs. • Operational efficiencies to drive higher margins with values homeowners understand. • Fast installation for labor and time savings. • Unintimidating, engaging maintenance to drive repeat business. • Operational noise reduction for humidity comfort without the ear aches.


TrueEASE Advanced Fan-Powered HumidifierPart Number Capacity DescriptionHE300A1005 18 Gallons (68 L)/Day TrueEASE Advanced Fan-Powered Humidifier, 18

Gallons/Day

TrueEASE Large Advance Bypass HumidifierPart Number Capacity DescriptionHE250A1005 17 Gallons (64L)/Day TrueEASE Large Advance Bypass Humidifier, 17

Gallons/Day

TrueEASE Small Advance Bypass HumidifierPart Number Capacity DescriptionHE150A1005 12 Gallons (46 L)/Day TrueEASE Small Advance Bypass Humidifier, 12

Gallons/Day


Indoor Air QualityHumidifiersHoneywellSteam HumidifiersTrueSTEAM Humidifier

Features: • Steam provides the highest and most consistent levels of humidity. • Application flexibility - Mount directly to the duct or remotely up to 20 feet away into tight-fitting or

unconditioned air spaces. • Installs in minutes - Limited duct cutting and bracket-mount design takes less than 5 minutes to complete. • Easy maintenance - Self-regulates cleaning cycles throughout the year. Annual maintenance requires no

tools to access and clean, saving time and money on annual contractor service calls. • 5-year warranty Includes: HM506W1005: Humidifier, duct template hardware, saddle valve, drain supply water tubing, duct nozzle, mounting bracket, water filter, backflow valve. Does not include humidistat. HM509H8908 & HM512H8908: Humidifier, H8908 manual humidistat, duct template hardware, saddle valve, drain supply water tubing, duct nozzle, mounting bracket, water filter, backflow valve.


Part Number Capacity Color Dimensions Voltage DescriptionHM506W1005 6 Gallons/Day Dark Empire Gray 19" H x 11-1/4" W x 9" D 120 Vac Wireless TrueSTEAM 6-Gallon HumidifierHM509W1005 9 Gallons/Day Dark Empire Gray 19" H x 11-1/4" W x 9" D 120 Vac TrueSTEAM 9-Gallon Humidifier with H8908 Manual

HumidistatHM512W1005 12 Gallons/Day Dark Empire Gray 19" H x 11-1/4" W x 9" D 120 Vac TrueSTEAM 12-Gallon Humidifier with H8908 Manual

Humidistat

Media FiltersAprilaireFiltering Media#201 Media

Part Number Description201 Filtering Media for Models 2200 & 2250 Air Cleaners

#213 Media

Part Number Description213 Filtering Media for Models 4200, 3210, 2210, 2200 and 2120 Air Cleaners with

Upgrade Kit 1213

#401 Media

Part Number Description401 Filtering Media for Model 2400 Air Cleaners


Indoor Air QualityMedia FiltersAprilaireFiltering Media#413 Media

Part Number Description413 Filtering Media for Models 4400, 3310, 2410, 2400 and 2140 Air Cleaners with

Upgrade Kit 1413

#501 Media

Part Number Description501 Filtering Media for Model 5000 Air Cleaner

613 Media

Part Number Description613 Filtering Media for 16" x 25" Air Cleaners that have been fitted with the

Competitive Upgrade Kit Part Number 4987

813 Media

Part Number Description813 Filtering Media for 20" x 25" Air Cleaners that have been fitted with the

Competitive Upgrade Kit Part Number 4987

Upgrade KitsFeatures: • Removes nearly 2 times more contaminants • One time upgrade - lifetime improvement • Installs in minutes • No tools required • Easier filter change • Fits in units with plastic (non-metal) doors


Part Number Includes Description1213 Replacement filter #213 Media Upgrade Kit for 2200 & 2120 Series Air Cleaners1413 Replacement filter #413 Media Upgrade Kit for 2400 & 2140 Series Air Cleaners


Indoor Air QualityMedia FiltersHoneywellReplacement FilterFC100A

Features: • New MERV 10 (at 492 FPM) performance with lower pressure drop at no additional cost. • Efficiency ratings are based on American Society of Heating, Refrigerating and Air-Conditioning

Engineers Standard 52.2 1999. • Efficiency ranges are defined for small particles, E1=0.3 to 1.0 microns; medium particles, E2=1.0 to 3.0

microns; and large particles, E3=3.0 to 10.0 microns


Part Number Dimensions DescriptionFC100A1003 16” x 20” Media Replacement Filter, 16” x 20”FC100A1011 20” x 20” Media Replacement Filter, 20” x 20”FC100A1029 16” x 25” Media Replacement Filter, 16” x 25”FC100A1037 20” x 25” Media Replacement Filter, 20” x 25”

PopUP FiltersFeatures: • Honeywell PopUP filters store flat and pop into shape for installation. • Save space on the truck, Less damage during storage, Save time on assembly. • So easy you can sell over-the-counter to homeowners without worry of mistakes. • Compact shape makes PopUP easy to ship, No combs, pleat spacers or end caps • Efficiency Standard: Efficiency ratings are based on American Society of Heating, Refrigerating and Air-



Part Number Dimensions DescriptionPOPUP2025 20" x 25" POPUP Media Air Filter, 20" x 25"POPUP2200 20-1/4" x 24-1/4" x 5-7/8" POPUP Replacement Filter for Space-Guard -2200POPUP2400 16" x 27-1/8" x 5-7/8" POPUP Replacement Filter for Space-Guard -2400

TrueCLEAN Replacement FilterEfficiency Standard: Efficiency ranges are defined for small particles, E1=0.3 to 1.0 microns; medium particles, E2=1.0 to 3.0 microns; and large particles, E3=3.0 to 10.0 microns, Efficiency ratings are based on American Society of Heating, Refrigerating and Air-Conditioning


Airflow CapacityPart Number cfm m³/hr Dimensions DescriptionFR8000A1620 Max.- 1350 Max.- 3000 16” x 20” TrueCLEAN Replacement Filter, 16” x 20”FR8000A2020 Max.- 1800 Max.- 3060 20” x 20” TrueCLEAN Replacement Filter, 20” x 20”FR8000F1625 Max.- 1600 Max.- 2720 16” x 25” TrueCLEAN Replacement Filter, 16” x 25”FR8000F2025 Max.- 2000 Max.- 3400 20” x 25” TrueCLEAN Replacement Filter, 20” x 25”


Indoor Air Quality Pleated FiltersFlandersPRE PLEAT 40 LPD - MERV 8 Pleated Filter

Features: • Media is made of 100% synthetic non-woven proprietary media that can be recycled. • The media is supported by an expanded metal continuously laminated on the air leaving side to provide

pleat stability while eliminating flutter. • Pleat design is a V-Pleat that aids in pressure drop while reducing energy cost and allowing total media

usage and provides maximum airflow and dust holding capacity. • Frame is a two-piece construction, made of a heavy duty 24 point moisture resistant material. Diagonal

and horizontal support members are bonded to the media on both sides. • Highest dust holding capacity and lowest pressure drop in the industry • Maintains a mechanical MERV 8 per ASHRAE Standard 52.2. Classified UL 900 Classes 2.


NominalPart Number Media Area (Sq Ft) Depth (In) Size A x B x D (In) Standard Capacity Weight (lbs) DescriptionFCTFME4011420 3.3 1’’ 14 x 20 x 1 13 ppf 0.3 14" x 20" x 1" MERV 8 Pleated Filter FCTFME40114251 4.1 1’’ 14 x 25 x 1 13 ppf 0.4 14" x 25" x 1" MERV 8 Pleated Filter FCTFME4011620 3.7 1’’ 16 x 20 x 1 13 ppf 0.4 16" x 20" x 1" MERV 8 Pleated Filter FCTFME4011625 4.6 1’’ 16 x 25 x 1 13 ppf 0.5 16" x 25" x 1" MERV 8 Pleated Filter FCTFME4012020 4.5 1’’ 20 x 20 x 1 13 ppf 0.5 20" x 20" x 1" MERV 8 Pleated Filter FCTFME4012025 5.7 1’’ 20 x 25 x 1 13 ppf 0.6 20" x 25" x 1" MERV 8 Pleated Filter FCTFME4012424 6.4 1’’ 24 x 24 x 1 13 ppf 0.6 24" x 24" x 1" MERV 8 Pleated Filter FCTFME4012525 7.2 1’’ 25 x 25 x 1 13 ppf 0.7 25" x 25" x 1" MERV 8 Pleated Filter FCTFME4016252 8.4 2’’ 16 x 25 x 2 10 ppf 0.7 16" x 25" x 2" MERV 8 Pleated Filter FCTFME4021420 5.8 2’’ 14 x 20 x 2 10 ppf 0.5 14" x 20" x 2" MERV 8 Pleated Filter FCTFME4021425 7.2 2’’ 14 x 25 x 2 10 ppf 0.7 14" x 25" x 2" MERV 8 Pleated Filter FCTFME4021620 6.7 2’’ 16 x 20 x 2 10 ppf 0.6 16" x 20" x 2" MERV 8 Pleated Filter FCTFME4022020 8.2 2’’ 20 x 20 x 2 10 ppf 0.7 20" x 20" x 2" MERV 8 Pleated Filter FCTFME4022025 10.2 2’’ 20 x 25 x 2 10 ppf 0.9 20" x 25" x 2" MERV 8 Pleated Filter FCTFME4022424 11.5 2’’ 24 x 24 x 2 10 ppf 1 24" x 24" x 2" MERV 8 Pleated Filter FCTFME4022525 12.6 2’’ 25 x 25 x 2 10 ppf 1.1 25" x 25" x 2" MERV 8 Pleated Filter FCTFME4041625 15.5 4" 16 x 25 x 4 9 ppf 1.3 16" x 25" x 4" MERV 8 Pleated Filter FCTFME4042025 19.3 4" 20 x 25 x 4 9 ppf 1.6 20" x 25" x 4" MERV 8 Pleated Filter


Indoor Air Quality Pleated FiltersFlandersPRE PLEAT 40 LPD - MERV 8 Pleated Filter

Standard Capacity 300 FPM 500 FPM Nominal Size AxBxD (in)

CFM PD CFM PD 14 x 25 x 1 729 0.17 1215 - 14 x 20 x 1 583 0.17 972 - 16 x 20 x 1 667 0.17 1111 - 16 x 25 x 1 833 0.17 1389 - 20 x 25 x 1 1042 0.17 1736 - 20 x 20 x 1 833 0.17 1389 - 25 x 25 x 1 1302 0.17 2170 - 24 x 24 x 1 1200 0.17 2000 - 14 x 20 x 2 583 0.11 972 0.21 14 x 25 x 2 729 0.11 1215 0.21 16 x 20 x 2 667 0.11 1111 0.21 16 x 25 x 2 833 0.11 1389 0.21 20 x 20 x 2 833 0.11 1389 0.21 20 x 25 x 2 1042 0.11 1736 0.21 25 x 25 x 2 1302 0.11 2170 0.21 24 x 24 x 2 1200 0.11 2000 0.21 16 x 25 x 4 833 0.10 1389 0.19 20 x 25 x 4 1042 0.10 1736 0.19

Nominal Actual Size Size (in.) A B D

14 x 25 x 1 13-1/2" 24-1/2" 3/4" 14 x 20 x 1 13-1/2" 19-1/2" 3/4" 16 x 20 x 1 15-1/2" 19-1/2" 3/4" 16 x 25 x 1 15-1/2" 24-1/2" 3/4" 20 x 25 x 1 19-1/2" 24-1/2" 3/4" 20 x 20 x 1 19-1/2" 19-1/2" 3/4" 25 x 25 x 1 24-1/2" 24-1/2" 3/4" 24 x 24 x 1 23-3/8" 23-3/8" 3/4" 14 x 20 x 2 13-1/2" 19-1/2" 1-3/4" 14 x 25 x 2 13-1/2" 24-1/2" 1-3/4" 16 x 20 x 2 15-1/2" 19-1/2" 1-3/4" 16 x 25 x 2 15-1/2" 24-1/2" 1-3/4" 20 x 20 x 2 19-1/2" 19-1/2" 1-3/4" 20 x 25 x 2 19-1/2" 24-1/2" 1-3/4" 25 x 25 x 2 24-1/2" 24-1/2" 1-3/4" 24 x 24 x 2 23-3/8" 23-3/8" 1-3/4" 16 x 25 x 4 15-1/2" 24-1/2" 3-3/4" 20 x 25 x 4 19-1/2" 24-1/2" 3-3/4"


Indoor Air Quality Pleated FiltersFlandersPRE PLEAT 62RM11 - MERV 11 Pleated Filter

Features: • Upgrade existing rooftop and secular systems by up to 300% in efficiency to remove incoming

contaminants not previously removed. • Upgrade existing prefilter plenums with the 62RM11 Pleat to increase the life of your more expensive

final filters downstream. • Building owners and occupants will be significantly better protected from a bio aerosol hazard than with

conventional filters. • Available by special ordering in High-Velocity design. Contact Factory for pricing • Media Support: Diamond-shaped expanded metal • Moisture-resistant clay coated frame • V Pleat design • Media: Progressive density bicomponent fibers


NominalPart Number Media Area (Sq Ft) Depth (In) Size A x B x D (In) Weight (lbs) DescriptionFCTFME40SP41625 17.2 4" 16 x 25 x 4 2 16" x 25" x 4" MERV 11 Pleated FilterFCTFME40SP42025 21.2 4" 20 x 25 x 4 2.3 20" x 25" x 4" MERV 11 Pleated Filter

Standard Capacity

300 FPM 500 FPM Nominal Size AxBxD (in) CFM PD CFM PD

20 x 25 x 4 1042 0.12 1735 0.25 16 x 25 x 4 834 0.12 1390 0.25

Nominal Actual Size Size (in.) A B D

20 x 25 x 4 19-1/2 24-1/2 16 x 25 x 4 15-1/2 24-1/2


Indoor Air QualityTemperature Sensors AprilaireOutdoor Air Sensor

Length

Part Number Probe Wire Description8052 2" 33-1/2" Outdoor Mount Temperature Sensor for Auto-Trac Humidistat System

Surface Mount Wall Style Remote Temperature Sensor

Length Wall Mount

Part Number Probe Wire Height Thickness Width Weight (oz) Description8053 2" 33-1/2" 2-1/2" 1" 3-1/2" 1 Surface Mount Wall Style Remote

Temperature Sensor for Thermostat

Wall Mount Temperature Sensor

Part Number Depth Diameter Wire Length Weight (oz) Description8051 7/8" 1-1/2" 34-1/2" 1 Wall Mount Temperature Sensor for Thermostat

ThermostatsAprilaireNon-Programmable ThermostatsDual Powered - 8400 Series

Features: • Large 4.5 square inch LCD with high contrast for easier reading, Bright, white backlit display is easy to

read, Removable battery cover for fast, easy replacement • Displays room temperature, temperature setting and outdoor temperature simultaneously • Dual Powered...choice of battery powered or hardwired, for all applications • Easy-to-wire terminal block, Millivolt compatible, Dual fuel operation built in – eliminates • Outdoor temperature (requires 8052 outdoor temperature sensor) • Need for a dual fuel kit (requires 8052 outdoor temperature sensor) • Water panel, air filter, dehumidifier and HVAC service indicators, Simple “set-up” menu to activate

optional features, Soft-touch keys, Circulate fan mode, Compressor lockout protection • Quick reference instructions on board, Display temperature offset (+/-4º) • Fahrenheit & Celsius, Configures as manual heat/cool, or with auto changeover • 5 year warranty, Adjustable differential for 1st, 2nd, 3rdstage. Applications- Standard Systems gas, oil, electric, Single Stage/Heat Pump/Multi-Stage, Millivolt Systems Electrical Specifications: • 24 VAC (18-30 VAC), 1 amp maximum load per terminal • 2.5 amp total maximum load (all terminals), AC Power: 18-30 Volt AC • DC Power: 3.0 Volts DC (2 “AA” Alkaline batteries included)


Part Number Accuracy °F(°C) Control Range °F(°C) Dimensions Description8444 ±1 F (±0.5 C) 45° to 99° F (7° to 32°C) 5.25” x 4.50” x 1.00” Dual Powered Non Programmable Thermostat, 1H/1C

Single Stage, Conventional8446 ±1 F (±0.5 C) 45° to 99° F (7° to 32°C) 5.25” x 4.50” x 1.00” Dual Powered Non Programmable Thermostat, Single

Stage Compatible with Auxiliary 2H/1C Heat Pump8448 ±1 F (±0.5 C) 45° to 99° F (7° to 32°C) 5.25” x 4.50” x 1.00” Universal Dual Powered Non Programmable Thermostat,

2H/2C Multi Stage or 4H/2C Heat Pump


Indoor Air QualityThermostatsAprilaireProgrammable Thermostats8600 Touch Screen Thermostat

Features: • Real Language Programming — No Codes to Remember, No Manual to Reference • Large 10.3 sq. in. Backlit Display, Dual Fuel Operation • Built-In Dual Fuel Kit — Requires Outdoor Temperature Sensor • Dual Power, Maintenance Reminders, Programmable Fan and Circulate Fan Mode • Free Custom Imprinted Battery Covers, Five year warranty • Application:-Standard systems gas, oil, electric, Single stage/heat pump/multi-stage, Millivolt system Installation: • Dual Powered — battery-powered and/or hard wired • Dual fuel operation (auto lockout of compressor with call for back-up heat) • Commercial and residential applications (2 or 4 events per day) • Milivolt compatible (fireplaces/radiant heat), 2H/2C Conventional and 4H/2C Heat Pump • Remote indoor sensor option with 8051/8053 sensors, Temperature offset ± 4° • Integrated dual fuel kit w/ high and low balance point control (requires 8052 sensor) • Universal Thermostat - One stat on the truck that fits all applications • Configurable manual heat/cool or auto changeover modes • Large, easy-to-wire terminal block, Adjustable differential for 1st, 2nd, 3rd and 4th stages Operation: • Service reminders - Humidifier, air filter, dehumidifier, HVAC, Programmable fan • Equipment stage indication, High and low setpoint temperature limits • “Copy” function for quick and easy programming • Multiple hold options maximizes comfort and energy savings • Real time clock automatically adjusts for daylight savings time • Permanent memory — programming, time and date isn’t lost during a power outage Screen: • Exclusive message center (provides feedback and real language instructions) • Displays outdoor temp (with optional 8052 sensor) • Real language programming/set up — no manual needed, no codes to memorize • Full or limited screen lockout Electrical Specifications: • 24 VAC (18-30 VAC) • 1 amp maximum load per terminal, 2.5 amp total maximum load (all terminals) • AC Power: 18-30 Volt AC • DC Power: 3.0 Volts DC (2 “AA” Alkaline batteries included)


OperatingPart Number Accuracy °F(°C) Dimensions Ambient °F(°C) Humidity Range Description8600 ±1 F (±0.5 C) 4-15/16” H x 6” W

x 1-5/16” D32° to 120°F (0° to

48.9°C)5% to 90%

Relative HumidityUniversal Touchscreen Dual Power Thermostat,1H/1C, Single Stage/Heat Pump/Multi-Stage


Indoor Air QualityThermostatsAprilaireProgrammable ThermostatsDual Powered - 8400 Series

Features: • Easy to use temperature control and override program schedule at anytime. • Progressive recovery. • Permanent program retention during power loss. • Indefinite setpoint Hold. • Choice of 5/1/1 day programmable, 5/2 day. • Large 4.5 square inch LCD with high contrast for easier reading • Bright, white backlit display is easy to read • Displays room temperature, temperature setting and outdoor temperature simultaneously • Removable battery cover for fast, easy replacement • Dual Powered...choice of battery powered or hardwired, for all applications • Easy-to-wire terminal block • Millivolt compatible • Outdoor temperature (requires 8052 outdoor temperature sensor) • Dual fuel operation built in – eliminates • Need for a dual fuel kit (requires 8052 outdoor temperature sensor) • Water panel, air filter, dehumidifier and HVAC service indicators • Simple “set-up” menu to activate optional features • Soft-touch keys • Circulate fan mode • Compressor lockout protection • Quick reference instructions on board • Display temperature offset (+/-4º) • Fahrenheit & Celsius • Configures as manual heat/cool, or with auto changeover • 5 year warranty • Adjustable differential for 1st, 2nd, 3rdstage. Applications- Standard Systems gas, oil, electric, Single Stage/Heat Pump/Multi-Stage, Millivolt Systems Electrical Specifications: • 24 VAC (18-30 VAC) • 1 amp maximum load per terminal • 2.5 amp total maximum load (all terminals) • AC Power: 18-30 Volt AC • DC Power: 3.0 Volts DC (2 “AA” Alkaline batteries included)


OperatingPart Number Accuracy °F(°C) Dimensions Ambient

°F(°C)Humidity Range Description

8463 ±1 F (±0.5 C) 5.25” x 4.50” x 1.00” 32° to 120°F(0° to 48.9°C)

5% to 90%Relative Humidity

Dual Powered 5/2 or 5/1/1 Day ProgrammableThermostat, 1H/1C Single Stage, Conventional

8465 ±1 F (±0.5 C) 5.25” x 4.50” x 1.00” 32° to 120°F(0° to 48.9°C)


Dual Powered 5/2 Day Programmable Thermostat,2H/1C Heat Pump

8466 ±1 F (±0.5 C) 5.25” x 4.50” x 1.00” 32° to 120°F(0° to 48.9°C)


Universal Dual Powered 5/2 or 5/1/1 DayProgrammable Thermostat, 2H/2C Multi Stage or4H/2C Heat Pump


Indoor Air QualityThermostatsAprilaireProgrammable ThermostatsHome Comfort Control

Features: • Integrated Indoor Air Quality Solutions o Humidity Control - Humidifier (Automatic or Manual), Dehumidifier o Event-Based Air Cleaning o Fresh Air Ventilation with limits - Timed or ASHRAE set-up

• Universal system compatibility, 3 wire design • Intuitive, simple user interface, Real language descriptions in set up menus • Heat Blast – schedule override, Service reminders • Dealer imprint program for battery cover, 5 Year limited warranty Applications- Standard systems gas, oil, electric, single stage/heat pump/multi-stage Installation: • 24 VAC powered with battery backup for user interface • Dual fuel operation (auto lockout of compressor with call for back-up heat) • Programmable (2 or 4 events per day), Remote indoor sensor option with 8051/8053 sensors • Temperature offset ± 4° • Integrated dual fuel kit with high and low balance point control (requires 8052 sensor included) • 3H/3C conventional and 4H/2C heat pump, Configurable manual heat/cool or auto changeover modes • Configurable for heating only or cooling only operation, Large, easy-to-wire terminal block • Adjustable differential for 1st, 2nd, 3rd and 4th stages Operation: • Programmable fan • “Copy” function for quick and easy programming • Equipment stage indication, High and low set point temperature limits • Multiple hold options maximizes comfort and energy savings • Real time clock automatically adjusts for daylight savings time • Permanent memory — programming, time and date isn’t lost during a power outage • Heat Blast allows one touch control of heating to raise room temperature 3°F to 5°F Screen: • Large 10.3 sq. in. touch screen, Fully back lit with constant low intensity light option • Displays outdoor temp (with included 8052 sensor) • Real language programming/set up — no manual needed, no codes to memorize Specifications: • Operating ambient temperature of user interface: 32º to 120ºF (0º to 48.9ºC) • Operating ambient temperature of ECM: 32º to 158ºF (0º to 70ºC) Electrical Specifications • 24 VAC powered (18-30 VAC) • 1 amp maximum load per terminal • 2.5 amp total maximum load (all terminals) Terminal Designations: • User interface: 1, 2, 3 • Equipment control module: 1, 2, 3, RAT, LAT, ODT, C, R, RC, RH, W, W2, W3/B, Y, Y2, Y3/O, G, L,

CEQ, HUM, DHNO, DHNC, DHCOM, VENT, EAC


Part Number Accuracy °F(°C) Operating HumidityRange

User interfaceDimensions

Description

8910 ±1 F (±0.5 C) 5% to 90% relativehumidity non-condensing

6” x 4.85” x 1.25” Home Comfort Control Consists of the User Interfaceand the Equipment Control Module


Indoor Air QualityThermostatsAprilaireProgrammable ThermostatsUniversal Programmable Touch Screen Thermostat - Model 8620

Features: Operation: Humidity Control • Humidifier o Automatic humidity setpoint adjustment (must use ODT) or Manual Control. o Displays indoor RH on User Interface.

• Dehumidifier o Operates whole house dehumidifier or air conditioner to dehumidify. o Displays indoor RH on User Interface. o Energizes HVAC blower when dehumidifying .

Fresh Air Ventilation: • Provides fresh air with a motorized damper or an ERV/HRV. • Can be set up to use ASHRAE 62.2 guidelines or timed ventilation. Air Cleaning: • Event-Based Air Cleaning – 4 selectable air cleaning events. • Constant Cleaning (24/7), Automatic (30 min/hr), Event Clean (3 Hr Cycle). • Allergy (24 hr Cycle), Controls EAC with dedicated 24 VAC dry contact. Temperature Control: • Universal Programmable Thermostat - 2H/2C Conventional or 4H/2C Heat Pump. • Selectable, 7 day, 5/2, 5/1/1 or non programmable. • Heat Blast allows one touch control of heating to raise room temperature 3°F to 5°F. • Stage rate control uses equipment run time to control HVAC equipment staging. • Service reminders - Humidifier, water panel, dehumidifier, HVAC. • High and low setpoint temperature limits, Five year warranty. • “Copy” function for quick and easy programming. • Multiple hold options maximizes comfort and energy savings. • Permanent memory — programming, time and date are not lost during a power outage. Screen: • Large 10.3 sq. in. touch screen. • Fully back lit with constant low intensity light option. • Displays outdoor temp (with included 8052 sensor). • Real language programming/set up — no manual needed, no codes to memorize. Installation: • Dual Powered — battery-powered and/or hard wired. • 24 VAC power recommended with battery back-up. • Dual fuel operation (auto lockout of compressor with call for back-up heat). • Remote indoor sensor option with 8051/8053 sensors. • Configurable manual heat/cool or auto changeover. • Adjustable differential for 1st, 2nd, 3rd and 4th stages. Electrical Specifications: • 24 VAC (18-30 VAC), 1 amp maximum load per terminal. • 2.5 amp total maximum load (all terminals). • AC Power: 18-30 Volt AC, DC Power: 3.0 Volts DC (2 “AA” Alkaline batteries included). Applications: Standard systems: gas, oil, electric, single stage/multi-stage/heat pump/heat cool, Millivolt systems.


OperatingPart Number Accuracy °F(°C) Dimensions Ambient °F(°C) Humidity Range Description8620 ±1 F (±0.5 C) 4-15/16” H x 6” W

x 1-/16” D32° to 120°F (0° to

48.9°C)5% to 90% relative

humidity(non-condensing)

Universal Touch Screen 7 day, 5/2, 5/1/1 or NonProgrammable Thermostat , 1H/1C, Multi-stage,Heat Pump


Indoor Air QualityThermostatsAprilaireProgrammable ThermostatsUniversal Wireless Thermostat

Features: • Wireless control up to 100’ transmission range. • Universal Thermostat: o Single Stage or Multi-Stage o Heat Pump or Heat/Cool o 3 Heat/2 Cool o 2 Heat/2 Cool

• 7 Day Programmable, 4 Events/Day or Non-programmable. • Copy function for easy schedule programming. • Temporary and Permanent Hold, Auto changeover. • Built-in dual fuel operation, Adjustable differential for all stages. • Optional staging based on time, Backlight Display. • Installer-settable maximum heating and minimum cooling set-point temperatures. • Adjustable compressor minimum on/off times. • Control Module has multi-color LED to indicate type of HVAC call and communication status. • Easy addressing function allows multiple 8710 thermostats to be used in the same location. • 5 year warranty.


Part Number Dimensions Range Description8710 4.50” H x 5.00” W x 1.00” D Up to 100’ Universal Wireless Thermostat, Single Stage or Multi-Stage, Heat

Pump or Heat/Cool

EcobeeProgrammable ThermostatsTouchscreen Smart Thermostat - 4 Heat/2 Cool

Features: • Programmable Periods - Awake, Away, Home, Sleep, Custom • User Accounts – Shared • Number of Thermostats that can be connected to your account - Recommended for up to 10

thermostats • Thermostat Management - Individually OR in Groups • One-button Override - Quick Save • Mobile Apps - iPhone/iPod Touch Android • Compatible Accessories - Remote Sensor Module, Power Supply, Smart Plugs • 3 Year Warranty • Ability to Configure Custom max/min Temperatures • Live Internet Weather Feed • Humidity Display, Color Display, WiFi Enabled • 7-day Programming, 365-day Scheduling, Historical System Information • Remote Programming through Web Portal, Encrypted Communication over Internet

Part Number Heat Pump Number of Wires toThermostat

Wireless Protocol Description

ECBEBSTAT01 4H / 2C 4 B / G Touchscreen Smart Thermostat, 4 Heat/2 Cool


Indoor Air QualityThermostatsHoneywellNon-Programmable ThermostatsDigital Round Thermostat - T8775A1009

Features: • Attractive styling complements any décor. • One-touch backlit display. • Familiar twist-to-see operation. • Available in Heat/Cool and Heat Only models. • Provide 24V control of heating only or heat/cool systems. • Includes- Wallplate, resistor assembly, mounting screws and wall anchors. Application: • Heat Only Specifications: • Comments: Large easy-to-see backlit display • Stages: 1 Heat • Terminal Designations: R, W


Part Number Accuracy°F(°C)

Color Dimensions ElectricalRatings

SupplyVoltage

Description

T8775A1009 ±1 F (±0.5 C) PremierWhite

3-11/16" Dia. x 1-7/16" D 18 to 30 Vac 20 to 30 Vac Non-Programmable Digital Round Thermostat,1 Heat Stage

Digital Round Thermostat - T8775C1005Features: • Attractive styling complements any décor. • One-touch backlit display. • Familiar twist-to-see operation. • Available in Heat/Cool and Heat Only models. • Provide 24V control of heating only or heat/cool systems. • Includes: Wallplate, resistor assembly, mounting screws and wall anchors. Specifications: • Comments: Large easy-to-see backlit display • Stages: 1 Heat/1 Cool • Terminal Designations: R, Rc, W, Y, G, O, B Application: • Heat Only




SupplyVoltage

Description

T8775C1005 ±1 F (±0.5 C) PremierWhite

3-11/16" Dia. x 1-7/16" D 18 to 30 Vac 20 to 30 Vac Non-Programmable Digital Round Thermostat,1 Heat/1 Cool Stage


Indoor Air QualityThermostatsHoneywellNon-Programmable ThermostatsEASY-TO-SEE Model Mercury Free Round Thermostat

Features: • Mercury Free. • Classic Styling. • Premier White. • The T87K heat only works with 2 or 3 wire heat-only systems. • Provide electronic control of 24Vac heating and cooling systems with the classic twist to set dial. • Includes- 6 in. (152 mm) cover ring and switch position labels. Specifications: • Comments: EASY-TO-SEE model with Large raised markings and a click at each 2 degree set point

change. • Stages: 1 Heat/1 Cool • Terminal Designations: R, Rc, W, Y, G, O, B Application: • 1 Heat/1 Cool Conventional Systems and Heat Pumps with No Auxiliary Heat




SupplyVoltage

Description

T87N1026 ±2 F (±1 C) PremierWhite

4" Dia. x 1-3/4" D 20 to 30 Vac 20 to 30 Vac EASY-TO-SEE Model Non-Programmable MercuryFree Round Thermostat, 1 Heat/1 Cool Stages

Elec.Heat Thermostat - T410A1013Features: • Economical. • Replace virtually any two-wire (T410A) or four-wire (T410B) line voltage wall-mounted electric heating

thermostat. • Easy to install; 6 in. (150 mm) color-coded leads. • Include long-lasting Micro Switch™ mechanism. • Rugged, plastic mounting base and one-piece cover with vents. • Ideally suited to new construction applications. Electrical Connections • 6 in. (150 mm) copper leadwires, suitable for connecting to aluminum wiring if approved CO/ALR

solderless connectors are used. Application • Electric baseboards, convectors and fan forced heaters (resistive rated loads).



Color Dimensions Stages Supply Voltage SwitchingAction

Description

T410A1013 2°C PremierWhite

4-1/2" H x 2-3/4" W x 2 1/4" D 1 Heat 120 Vac; 208 Vac;240 Vac; 277 Vac

SPST Economy Electric Heat Thermostat -Single Stage Heat


Indoor Air QualityThermostatsHoneywellNon-Programmable ThermostatsElec.Heat Thermostat - T4398A1021

Features: • For control of resistive-rated baseboard electric heaters, Extremely sensitive to temperature changes. • Replace virtually all standard wall-mounted line voltage thermostats. • Color-coded leads allow easy installation, Include long-lasting Micro Switch™ mechanism. • Rugged, plastic mounting base, Cover thermometer indicates room temperature. • Well suited for upgrades and high-end new construction. • Mounts directly on vertical 2 x 4 in. outlet box, or on 4 x 4 in. outlet box. Electrical Connections • 6 in. (150 mm) copper leadwires, suitable for connecting to aluminum wiring if approved CO/ALR

solderless connectors are used. Application • Electric baseboards, convectors and fan forced heaters (resistive rated loads). Hazmat Information • UN 2037 Butane (Receptacles, small, containing gas cartridges), 2.1, LTD. QTY, one Fiberboard box X

1kg



Color Dimensions Stages Supply Voltage SwitchingAction

Description

T4398A1021 2°F (1°C) PremierWhite

4-1/2" H x 2-7/8" W x 2-5/8" D 1 Heat 120 Vac; 208 Vac;240 Vac; 277 Vac

SPST High Performance Electric HeatThermostat - Single Stage Heat

FocusPRO 5000 Thermostats - Up to 1 Heat/1 Cool Conventional SystemsFeatures: • Non-programmable digital thermostat. • Large, clear, backlit display - easy to read in various lighting conditions. • Display size options - available in large screen or standard. • Precise comfort control (±1 F) - maintains consistent comfort to the highest level of accuracy. • Easy change battery door - flip out door allows for easy battery replacement without removing or

disassembling the thermostat. • Up to 3 Heat/2 Cool Heat Pump or Up to 2 Heat/2 Cool Conventional. • Dual-powered (battery and/or hardwire).




SensorElement

Description

TH5110D1006 ±1 F (±0.5 C) PremierWhite

3-7/16" H x 4-1/2" W x1-5/16" D

20 to 30 Vacor 750 mV

Thermistor FocusPro Digital Non-Programmable StandardDisplay Thermostats, 1 Heat/1 Cool Stages


3-7/16" H x 4-1/2" W x1-5/16" D


Thermistor FocusPro Digital Non-Programmable LargeDisplay Thermostats, 1 Heat/1 Cool Stages

Product Number Application Terminal Designations Stages Comments

TH5110D1006 Up to 1 Heat/1 Cool Conventional Systems and Heat Pumps with No

Auxiliary Heat R, Rc, C, W (O/B), Y, G Up to 1

Heat/1 Cool Standard display size 1.95 sq. in.

TH5110D1022 Up to 1 Heat/1 Cool Conventional Systems and Heat Pumps with No

Auxiliary Heat R, Rc, C, W (O/B), Y, G Up to 1

Heat/1 Cool Large display size

2.98 sq. in.


Indoor Air QualityThermostatsHoneywellNon-Programmable ThermostatsFocusPRO 5000 Thermostats - Up to 2 Heat/2 Cool Conventional Systems

Features: • Non-programmable digital thermostat. • Large, clear, backlit display - easy to read in various lighting conditions. • Display size options - available in large screen or standard. • Precise comfort control (±1 F) - maintains consistent comfort to the highest level of accuracy. • Easy change battery door - flip out door allows for easy battery replacement without removing or

disassembling the thermostat. • Up to 3 Heat/2 Cool Heat Pump or Up to 2 Heat/2 Cool Conventional. • Dual-powered (battery and/or hardwire).




SensorElement

Description


3-9/16" H x 5-13/16" Wx 1-1/2" D


Thermistor FocusPro Digital Non-Programmable StandardDisplay Thermostats, 2 Heat/2 Cool Stages


3-9/16" H x 5-13/16" Wx 1-1/2" D



TH5320U1001 ±1 F (±0.5 C) PremierWhite

3-9/16" H x 5-13/16" Wx 1-1/2" D




TH5220D1003 Up to 2 Heat/2 Cool Conventional Systems; Up to 2 Heat/1 Cool Heat Pumps

Rc, R, W (O/B), W2 (AUX), Y, Y2 (E), G, L, C

Up to 2 Heat/2 Cool

Standard display size 3.75 sq. in.

TH5220D1029 Up to 2 Heat/2 Cool Conventional Systems; Up to 2 Heat/1 Cool Heat Pumps


Up to 2 Heat/2 Cool

Large display size 5.09 sq. in.

TH5320U1001 Up to 2 Heat/2 Cool Conventional Systems; Up to 3 Heat/2 Cool Heat Pumps

Rc, R, W (O/B), W2 (AUX/E), Y, Y2, G, L, C

Up to 3 Heat/2 Cool

Large display size 5.09 sq. in.

LineVoltPRO 7000 Digital Electric Heat Thermostats - Dial TypeFeatures: • Electronic temperature control - precision of ±1º F saves up to 10%* on heating bills • Easy temperature setting - with single control dial • Soundproofed for quiet operation - reduces the clicking noise commonly heard with conventional

thermostats • On/Off switch allows you to turn the thermostat off at the end of the heating season • Temperature range stops - prevents user from setting the temperature too high or too low • Maintenance free - no batteries required • 5-year limited warranty • Application- Electric baseboards, convectors and fan forced heaters (resistive rated loads) • Electrical Ratings- 15 Amps Max; 3600 Watts at 240 VAC, 3120 Watts at 208 VAC


Part Number Accuracy °F(°C) Color Dimensions Stages Supply Voltage DescriptionTL7230A1004 ±1 F (±0.5 C) Premier

White4-7/8" H x 2-3/4" W x

7/8" D1 Heat 208 Vac; 240 Vac LineVoltPRO 7000 Non-Programmable

Electric Thermostat, Double Pole


Indoor Air QualityThermostatsHoneywellNon-Programmable ThermostatsLineVoltPRO 7000 Digital Electric Heat Thermostats - Horizontal Lays

Features: • Electronic temperature control - precision of ±1 F saves up to 10% on heating bills. • Large, clear, backlit display - easy to read in various lighting conditions. • Soundproofed for quiet operation - reduces the clicking noise commonly heard with conventional

thermostats. • On/Off switch allows you to turn the thermostat off at the end of the heating season. • Heating indicator - at a glance confirmation that the heat is on. • Maintenance free - no batteries required. • Application: Electric baseboards, convectors and fan forced heaters (resistive rated loads). • Approvals, Underwriters Laboratories Inc. - UL Listed 9R12, File Number: E183695. • Approvals, Canadian Standards Association - cCSAus, File Number: LR76030. Specification: • Electrical Ratings: 15 Amps Max; 3600 Watts at 240 VAC, 3120 Watts at 208 VAC



Color Dimensions Stages SwitchingAction

Description

TL7235A1003 ±1 F (±0.5 C) PremierWhite

4-7/8" H x 2-3/4" W x7/8" D

1 Heat DPST LineVoltPRO 7000 Digital Non-ProgrammableElectric Heat Thermostats, Double Pole

Mercury Free Heat Only Low Voltage Thermostat - T822K1000Features: • Vented cover for improved temperature sensing. • Setting lever and thermometer scale on thermostat face. • Mounts directly on the wall or on vertical outlet box. • Integrated thermometer and setting scale. Specifications: • Stages: 1 Heat • Terminal Designations: R, W Application: Heat Only



Color Dimensions SupplyVoltage

SwitchingAction

Description

T822K1000 ±2 F (±1 C) PremierWhite

4-3/4" H x 2-7/8" W x1-3/8" D

20 to 30 Vac SPST Non-Programmable Mercury Free Heat OnlyThermostat - Low Voltage, HEAT-OFF SwitchPosition, Temp. Range 45°F to 95°F


Indoor Air QualityThermostatsHoneywellNon-Programmable ThermostatsMercury Free Heat Only Low Voltage Thermostat - T822K1018

Features: • Vented cover for improved temperature sensing, Setting lever and thermometer scale on thermostat

face. • Mounts directly on the wall or on vertical outlet box, Integrated thermometer and setting scale. Specifications: • Stages: 1 Heat, Terminal Designations: R, W Application: Heat Only




SwitchingAction

Description


4-3/4" H x 2-7/8" W x1-3/8" D

20 to 30Vac

SPST Non-Programmable Mercury Free Heat OnlyThermostat - Low Voltage, Temp. Range 45°F to 95°F

Mercury Free Heat Only Low Voltage Thermostat - T822K1042Features: • Vented cover for improved temperature sensing, Setting lever and thermometer scale on thermostat

face. • Mounts directly on the wall or on vertical outlet box, Integrated thermometer and setting scale. Specifications: • Stages: 1 Heat, Terminal Designations: R, W Application: Heat Only




SwitchingAction

Description


4-3/4" H x 2-7/8" W x1-3/8" D

20 to 30Vac

SPST Non-Programmable Mercury Free Heat OnlyThermostat - Low Voltage, HEAT-OFF Switch PositionTemp. Range 35°F to 85°F

Mercury Free Heat Only Thermostat - T827K1009Features: • Rated for 12 Vdc and mill voltage systems. • Coiled bimetal element operates snap-acting switch. • Temperature setting lever on bottom of thermostat. • Mounting using two screws through base to wall or vertical outlet box. • Temperature setting and thermometer scale on cover.



Color Dimensions Stages Supply Voltage Description


4-3/4" H x 2-7/8" W x1-3/8" D

1 Heat 12 Vdc; 750 mV Non-Programmable Mercury Free Heat OnlyThermostat for Single Stage Low Voltage Systems


Indoor Air QualityThermostatsHoneywellNon-Programmable ThermostatsMercury Free Low Voltage Thermostat - T834N1002

Features: • Integrated thermometer and temperature setting scale. • Precise Snap-action switch. • Mount directly on wall or outlet box. • Includes dealer logo pocket. Specifications: • Stages: 1 Heat/1 Cool • Terminal Designations: R, Rc, W, Y, G, O, B Application: • 1 Heat/1 Cool Conventional Systems and Heat Pumps with No Auxiliary Heat




SwitchingAction

Description


4-3/4" H x 2-7/8" W x1-3/8" D

20 to 30 Vac SPST Non-Programmable Mercury Free VerticalThermostat, 1 Heat/1 Cool Stages, Low Volt

Mercury Free Round Thermostats - T87K1007Features: • Mercury Free. • Classic Styling. • The T87K heat only works with 2 or 3 wire heat-only systems. • Provide electronic control of 24Vac heating and cooling systems with the classic twist to set dial.



Color Dimensions Stages SupplyVoltage

Description


3-11/16" Dia. x 1-3/4" D 1 Heat 20 to 30 Vac Non-Programmable Mercury Free RoundThermostat, 1 Heat Stage

Mercury Free Round Thermostats - T87N1000Features: • Mercury Free. • Classic Styling. • The T87K heat only works with 2 or 3 wire heat-only systems. • Provide electronic control of 24Vac heating and cooling systems with the classic twist to set dial.



Color Dimensions Stages SupplyVoltage

Description


3-11/16" Dia. x 1-3/4" D 1 Heat/1Cool

20 to 30 Vac Non-Programmable Mercury Free RoundThermostat, 1 Heat/1 Cool Stage


Indoor Air QualityThermostatsHoneywellNon-Programmable ThermostatsMercury Free Thermostat - T8034N1007

Features: • Integrated thermometer and temperature setting scale. • Precise Snap-action switch. • Mount directly on wall or outlet box. • Includes dealer logo pocket. Specifications: • Stages: 1 Heat/1 Cool • Terminal Designations: R, Rc, W, Y, G, O, B • Anticipator Setting: Heating-0.18 to 1.0A adjustable; Cooling-fixed 24 to 30 Vac Application: • 1 Heat/1 Cool Conventional Systems and Heat Pumps with No Auxiliary Heat




SwitchingAction

Description


2-7/8" H x 4-3/4" W x1-3/8" D

20 to 30 Vac SPST Non-Programmable Mercury Free HorizontalThermostat, 1 Heat/1 Cool Stages

PRO 1000 Non-Programmable ThermostatFeatures: • Basic up and down temperature buttons. • Basic operation. • Clear, Backlit Digital Display - Easy to read in various lighting conditions • Simple-Set Programming - Basic operation with up and down temperature buttons


Part Number Changeover Heat Pump DescriptionTH1000D1001 Manual 1 Heat/1 Cool PRO 1000 Non-Programmable Thermostat,1 Heat/1 Cool Heat Pump

PRO 3000 Non-Programmable ThermostatsFeatures: • Non-programmable digital thermostat. • Backlit digital display - both current and set temperatures are easy to read in various lighting conditions. • Shows both current and set temperatures at the same time. • Precise comfort control [± 1 F (± 0.5 C)] - maintains consistent comfort to the highest level of accuracy. • Basic operation - easy-to-use slide switches allow you to select the heat or cool mode, and operate the

fan.



Color Dimensions SensorElement

Description


3-13/16" H x 5-3/8" W x1-1/4" D

Thermistor Pro Non-Programmable Standard DisplayThermostat, 1 Heat/1 Cool Stages


3-13/16" H x 5-3/8" W x1-1/4" D

Thermistor Pro Non-Programmable Standard DisplayThermostat, 2 Heat/1 Cool Heat Pump Stages


Indoor Air QualityThermostatsHoneywellNon-Programmable ThermostatsPRO Basic 1000 Non-Programmable Thermostats

Features: • Non-programmable digital thermostat. • Easy-to-read backlit display - easy to read in various lighting conditions. • Precise comfort control [±1 F (±0.5 C)] - maintains consistent comfort to the highest level of accuracy. • Basic operation - easy-to-use slide switches allow you to select the heat or cool mode, and operate the

fan.



Color Dimensions OperatingHumidity Range

Description


4-11/16" H x 2-7/8" W x1-1/8" D

5 to 90% RH,non-condensing

Basic Pro Non-Programmable Digital Thermostat, 1Heat /1 Cool Stages


4-11/16" H x 2-7/8" W x1-1/8" D


Basic Pro Non-Programmable Digital Thermostat, 2Heat/1 Cool Heat Pump Stages

Wireless FocusPRO 5000 Digital ThermostatFeatures: • FocusPRO 5000 digital thermostat offers the perfect blend of features, performance, energy savings and

value. • With the largest backlit screen in its class, the FocusPRO 5000 prominently displays both room and set

temperature. • Application: Gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity. Specifications: • Comments: Thermostat is also available in kits for zoned and non-zoned systems. • Stages: Up to 3 Heat / 2 Cool Heat Pump or Up to 2 Heat / 2 Cool Conventional. • Parts Needed for Operation (not included) - TrueZONE System: HZ432 or HZ322 TrueZONE panel;

THM4000R1000 Wireless Adapter. • Parts Needed for Operation (not included) - Non-Zoned System: Parts Needed for Operation (not

included) - Non-Zoned System.


Part Number Color Dimensions OperatingHumidity Range

SensorElement

Description

TH5320R1002 PremierWhite

3-9/16" H x 5-13/16" W x1-1/2" D


Thermistor FocusPRO 5000 Non-Programmable Digital Thermostat


Indoor Air QualityThermostatsHoneywellProgrammable ThermostatsBasic PRO 2000 Programmable Thermostats

Features: • Weekday/Weekend programming - 5-2 (Weekdays, Weekend) programming. • Backlit digital display - both current and set temperatures are easy to read in various lighting conditions. • Precise comfort control [±1 F (±0.5 C)] - maintains consistent comfort to the highest level of accuracy. • Basic operation - easy-to-use slide switches allow you to select the heat or cool mode, and operate the

fan. • Adaptive Intelligent Recovery - ensures programmed temperature is reached by programmed time.



Color Dimensions OperatingHumidity Range

Description


4-11/16" H x 2-7/8" W x1-1/8" D


Basic Pro 2000 Programmable Vertical Thermostat,1 Heat/1 Cool Stages


4-11/16" H x 2-7/8" W x1-1/8" D


Basic Pro 2000 Programmable Vertical Thermostat,2 Heat/1 Cool Heat Pump Stages

Product Number Application Terminal Designations Stages

TH2110D1009* Heat/Cool or Heat Pump without Auxiliary Heat R, C W, Y G, O/B 1 Heat/1 Cool

TH2210D1007 Heat Pump Systems R, C, Aux, Y, G, O/B 2 Heat/1 Cool Heat Pump

* TRADELINE models

Commercial PRO 7000 Programmable ThermostatFeatures: • Large, clear display with backlight shows the current and set temperature and time--even in the dark. • Menu-driven programming make setup effortless. • Beautiful ergonomic design is smart and sophisticated to match your customers’ lifestyle. • Real-time clock keeps time during power failures and automatically updates to daylight savings. • Saving Changes notification lets you know when the schedule changes have been saved. • Change reminders let you know when to replace the batteries. • Holiday Override options allow you to override the program schedule, as desired. • Speedy same--schedule programming--no need to copy multiple days. • Armchair programming allows you to remove the thermostat from the wall for programming. • Application- 24 Vac heating and cooling systems; Heat Pump Systems; Conventional systems;

Packaged RTU Specification: • Comments: Selectable programmable or nonprogrammable; Includes A terminal to enable an

economizer or control a lighting panel when used as a time of day relay. • Stages: Up to 2 Heat/ 2 Cool Conventional; Up to 3 Heat/ 2 Cool Heat Pump. • Terminal Designations: R, Rc, W (O/B), W2 (W1), Y, Y2, A, G, C, S1, S2


Part Number Color Dimensions Electrical Connections DescriptionTB7220U1012 Premier White 3-3/4" H x 6" W x 1-3/8" D 24 VAC or Battery Commercial PRO 7000 Programmable Thermostat


Indoor Air QualityThermostatsHoneywellProgrammable ThermostatsCommercial VisionPRO 8000 Touchscreen Programmable Thermostat

Features: • Large, clear display with backlight shows the current and set temperature and time even in the dark. • Menu-driven programming make setup effortless. • Beautiful ergonomic design is smart and sophisticated to match your customers' lifestyle. • Touchscreen interaction Real-time clock keeps time during power failures and automatically updates to

daylight savings, Change reminders let you know when to replace the batteries. • Saving Changes notification lets you know when the schedule changes have been saved. • Holiday Override options allow you to override the program schedule, as desired. • Speedy same--schedule programming--no need to copy multiple days. • Armchair programming allows you to remove the thermostat from the wall for programming. • Application: 24 Vac heating and cooling systems; Heat Pump Systems; Conventional systems;

Packaged RTU Specification: • Comments: The L-terminal is an input only; Selectable programmable or non-programmable; Includes

A terminal to enable an economizer or control a lighting panel when used as a time of day relay. • Stages: Up to 2 Heat/ 2 Cool Conventional; Up to 3 Heat/2 Cool Heat Pump • Terminal Designations: R, Rc, W (O/B), W2 (W1), Y, Y2, L, A, G, C, S1, S2


Part Number Color Dimensions Electrical Connections DescriptionTB8220U1003 Premier White 4-9/16" H x 6" W x 1-3/8" D 24 VAC or Battery Commercial VisionPRO 8000 Touchscreen

Programmable Thermostat

FocusPRO 5-1-1 Programmable Wireless ThermostatFeatures: • Selectable to 5-1-1 (Weekdays, Saturday, Sunday) or 5-2 (Weekdays, Weekend) programmable

thermostat, Large, clear, backlit display - easy to read in various lighting conditions. • Display size options - available in large screen or standard. • Precise comfort control (+/-1 F) - maintains consistent comfort to the highest level of accuracy. • Simplified programming and operation. • Easy change battery door - flip out door allows for easy battery replacement without removing or

disassembling the thermostat, Built in instructions - simple, pull out instruction manual. • Adaptive Intelligent Recovery - ensures programmed temperature is reached by programmed time. • Temperature range stops - prevents user from setting the temperature too high or too low. • Application- Gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity Specifications: • Comments: Thermostat is also available in kits for zoned and non-zoned systems • Stages: Up to 3 Heat / 2 Cool Heat Pump or Up to 2 Heat / 2 Cool Conventional • Programmability: 5-1-1 Day Program or 5-2 Day Program • Parts Needed for Operation (not included) - Non-Zoned System: HZ432 or HZ322 TrueZONE panel;

THM4000R1000 Wireless Adapter. • Parts Needed for Operation (not included) - Non-Zoned System: THM5320R1000 Equipment Interface

Module


Part Number Color Dimensions Sensor Element DescriptionTH6320R1004 Premier

White3-9/16" H x 5-13/16" W x

1-1/2" DThermistor FocusPRO 5-1-1 Programmable Wireless Thermostat


Indoor Air QualityThermostatsHoneywellProgrammable ThermostatsFocusPRO 6000 5-1-1 Day Programmable Thermostat - Large Display

Features: • Selectable to 5-1-1 (Weekdays, Saturday, Sunday) or 5-2 (Weekdays, Weekend) programmable

thermostat. • Large, clear, backlit display - easy to read in various lighting conditions. • Display size options - available in large screen or standard. • Precise comfort control (±1 F) - maintains consistent comfort to the highest level of accuracy. • Simplified programming and operation. • Easy change battery door - flip out door allows for easy battery replacement without removing or

disassembling the thermostat. • Built in instructions - simple, pull out instruction manual. • Adaptive Intelligent Recovery - ensures programmed temperature is reached by programmed time. • Temperature range stops - prevents user from setting the temperature too high or too low.


Part Number Color Dimensions Display Size(Square Inch)

SensorElement

Description

TH6110D1021 PremierWhite

3-9/16" H x 5-13/16" W x1-1/2" D

5.09 Thermistor FocusPro Programmable Large Display Thermostat, 1Heat/1 Cool Conventional


3-9/16" H x 5-13/16" W x1-1/2" D

5.09 Thermistor FocusPro Programmable Large Display Thermostat, 2Heat/2 Cool Conventional

TH6320U1000 PremierWhite

3-9/16" H x 5-13/16" W x1-1/2" D

5.09 Thermistor FocusPRO Programmable Large Display Thermostat 2Heat /2 Cool Conventional, 3 Heat /2 Cool Heat Pump


TH6110D1021 Heat/Cool or Heat Pump without Auxiliary Heat Rc, R, W (O/B), Y, G, C Up to 1 Heat/1 Cool

TH6220D1028 Heat/Cool or Heat Pump with Auxiliary Heat


Up to 2 Heat/1 Cool Heat Pump; up to 2 Heat/2 Cool Conventional

TH6320U1000 Heat/Cool or Heat Pump with Auxiliary Heat

Rc, R, W (O/B), W2 (AUX/E), Y, Y2, G, L, C

Up to 3 Heat /2 Cool Heat Pump; Up to 2 Heat /2 Cool Conventional


Indoor Air QualityThermostatsHoneywellProgrammable ThermostatsFocusPRO 6000 5-1-1 Day Programmable Thermostat - Standard Display

Features: • Selectable to 5-1-1 (Weekdays, Saturday, Sunday) or 5-2 (Weekdays, Weekend) programmable

thermostat. • Large, clear, backlit display - easy to read in various lighting conditions. • Display size options - available in large screen or standard. • Precise comfort control (±1 F) - maintains consistent comfort to the highest level of accuracy. • Simplified programming and operation. • Easy change battery door - flip out door allows for easy battery replacement without removing or

disassembling the thermostat. • Built in instructions - simple, pull out instruction manual. • Adaptive Intelligent Recovery - ensures programmed temperature is reached by programmed time. • Temperature range stops - prevents user from setting the temperature too high or too low.


Part Number Color Dimensions Fan Current Operating Humidity Range DescriptionTH6110D1005 Premier

White3-9/16" H x 5-13/16" W x

1-1/2" D0.02 A to 0.5

A running5 to 90% RH,

non-condensingFocusPro Programmable Standard DisplayThermostat, 1 Heat/1 Cool Conventional


3-9/16" H x 5-13/16" W x1-1/2" D

0.02 A to 0.5A running


FocusPro Programmable Standard DisplayThermostat, 2 Heat/2 Cool Conventional


TH6110D1005 Heat/Cool or Heat Pump without Auxiliary Heat Rc, R, W (O/B), Y, G, C Up to 1 Heat/1 Cool

TH6220D1002 Heat/Cool or Heat Pump with Auxiliary Heat


Up to 2 Heat/1 Cool Heat Pump; Up to 2 Heat/2 Cool Conventional

LineVoltPRO 8000 7-Day Programmable Electric Heat ThermostatFeatures: • The LineVoltPRO programmable thermostat provides electronic control of 208/240 Vac resistive rated

electric baseboard heaters, radiant ceiling heat, convectors and fan forced heaters. • 7 day programmable - maintain the pre-set program schedule for up to 20% energy savings, or modify

the schedule to fit your lifestyle, Large, clear, backlit display - easy to read in various lighting conditions. • Electronic temperature control - precision of ±1 F saves up to an additional 10% on heating bills. • Soundproofed for quiet operation - reduces the clicking noise commonly heard with conventional

thermostats. • On/Off or On/Standby switch allows you to turn the thermostat off at the end of the heating season. • Early start - ensures programmed temperature is reached by programmed time. • Heating indicator - at a glance confirmation that the heat is on, Maintenance free - no batteries required. • Approvals - Underwriters Laboratories Inc. - UL Listed 9R12, File Number: E183695; Canadian

Standards Association - cCSAus, File Number: LR76030 • Application: Electric baseboards, convectors and fan forced heaters (resistive rated loads). Specifications: • Electrical Ratings: 15 Amps Max; 3600 Watts at 240 VAC, 3120 Watts at 208 VAC • Stages: 1 Heat • Programmability: 7 Day Program



SupplyVoltage

SwitchingAction

Voltage Description

TL8230A1003 PremierWhite

4-7/8" H x 2-3/4" W x7/8" D

2.67 208 Vac; 240Vac

DPST 208/240Vac

LineVoltPRO 8000 7-Day ProgrammableElectric Heat Thermostat


Indoor Air QualityThermostatsHoneywellProgrammable ThermostatsLineVoltPRO 8000 7-Day Programmable Hydronic Thermostat

Features: • Controls 2-way and 3-way zone valves or circulator pumps. • Special protection modes to prevent system seizures and to reduce callbacks, Easy to install. • Approvals: Underwriters Laboratories, Inc. Approved • Application: Central Heating (Conventional); Baseboards; Convectors; Fan-forced Heaters; Radiant

Ceilings • Used With: Aube CT240-02 Telephone Controller Specifications: • Electrical Ratings: Maximum Load: 5 A (resistive), 2 A (inductive) @ 24 VDC, 120 Vac, 240 Vac;

Compatible with millivolt systems • Stages: 1 Heat • Terminal Designations: R, W, (X, C, optional remote input) • Comments: Remote input for telephone controller or home automation system; Comfort, Economy and

Vacation Presets; With Backlit Display • Programmability: 7-Day Program



Color Dimensions Voltage Description

TL8100A1008 ±1 F (±0.5 C) White 3.3" x 3.1" x 0.5" Millivolt Compatible; 24Vdc; 120 Vac; 240 Vac

LineVoltPRO 8000 7-Day ProgrammableHydronic Thermostat

MultiPRO 7000Features: • The MultiPRO Multispeed and Multipurpose Thermostat is an effortless, seven-day programmable/non-

programmable thermostat that provides universal system compatibility, precise comfort and ease of programming, Holiday Override options allow you to override the program schedule, as desired.

• Large, clear display with backlight shows the current and set temperature and time--even in the dark. • Menu-driven programming make setup effortless, Change reminders let you know when to replace the

batteries, Beautiful ergonomic design is smart and sophisticated to match your customers’ lifestyle. • Real-time clock keeps time during power failures and automatically updates to daylight savings. • Saving Changes notification lets you know when the schedule changes have been saved. • Speedy same--schedule programming--no need to copy multiple days. • Armchair programming allows you to remove the thermostat from the wall for programming. • Programmable or non-programmable modes, Remote setback input for occupancy sensors or timeclocks. • VersaSpeed fan ramping algorithm and fan reset algorithm (fan coil and PTAC applications). • Up to 3 fan speeds for fan coil and 2 fan speeds for PTAC applications. • Remote Indoor air sensing option (20K ohm or 10K ohm). • Application: Conventional, Heat Pump, Fan Coil, and PTAC Systems. Specification: • Comments: Selectable programmable or non-programmable.; Includes 3 speed fan control and

configurable sensor input for indoor temperature, occupancy sensor, or changeover • Stages: 1 Heat/ 1Cool Conventional; Up to 2 Heat/ 1 Cool Heat Pump; 2 or 4 pipe Fan Coil; Up to 2

Heat/ 1 Cool PTAC • Terminal Designations: R, Rc, W1, O/B, Y, G, G2, G3, C, S1, S2


Part Number Color DescriptionTB7100A1000 Premier White MultiPRO 7000 Multispeed and Multipurpose Programmable/Non-Programmable

Thermostat


Indoor Air QualityThermostatsHoneywellProgrammable ThermostatsPRO 4000 5-2 Day Programmable Thermostats

Features: • Weekday/Weekend programming - 5-2 (Weekdays, Weekend) programming. • Backlit digital display - both current and set temperatures are easy to read in various lighting conditions. • Precise comfort control [±1 F (± 0.5 C)] - maintains consistent comfort to the highest level of accuracy. • Basic operation - easy-to-use slide switches allow you to select the heat or cool mode, and operate the

fan, Built in instructions - simple, pull out instruction manual. • Adaptive Intelligent Recovery - ensures programmed temperature is reached by programmed time.


Part Number Color Dimensions Electrical Ratings Sensor Element DescriptionTH4110D1007 Premier

White3-13/16" H x 5-3/8" W x

1-1/4" D20 to 30 Vac or 750 mV Thermistor Pro 5-2 Programmable Standard Display

Thermostat, 1 Heat/1 Cool Stages TH4210D1005 Premier

White3-13/16" H x 5-3/8" W x

1-1/4" D20 to 30 Vac or 750 mV Thermistor Pro 5-2 Programmable Standard Display

Thermostat, 2 Heat/1 Cool Heat Pump Stages


TH4110D1007 Heat/Cool or Heat Pump without Auxiliary Heat R, Rc, W, Y, G, O, B, C 1 Heat/1 Cool

TH4210D1005 Heat Pump Systems R, Y, AUX, E, G, O, B, L, C 2 Heat/1 Cool Heat Pump

Programmable Wireless System KitFeatures: Wireless FocusPRO thermostat: • Same great features of the FocusPRO thermostat - now wireless • Installs in minutes, Displays outdoor temperature and humidity • 1 year battery life, 2 month low battery warning, Dual Fuel enabled Equipment Interface Module(EIM): • All HVAC equipment is wired to the module • Module receives communication from the wireless devices Return Air Sensor: • Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the

wireless thermostat, Maintains 62 F for heating and 82 F for cooling RedLLnk Wireless Technology: • Powered by RedLINK reliability, No interference with other wireless devices in the home • RedLINK Internet Gateway for remote access, or wireless adapters for working with TrueZONE panels Specifications: • Stages: Up to 3 Heat / 2 Cool Heat Pump or Up to 2 Heat / 2 Cool Conventional • Programmability: 5-1-1 Day Program or 5-2 Day Program • Terminal Designations: C, R, Rc, Rh, W-O/B, W2-Aux/E, Y, Y2, G, L, RAS Application: Gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity Includes: • C7735A1000 Return Air Sensor, THM5320R1000 Equipment Interface Module • C7089R1013 Wireless Outdoor Sensor, TH6320R1004 Wireless FocusPRO 5-1-1 Programmable

Thermostat, REM5000R1001 Personal Comfort Station


Part Number ElectricalRatings

Fan Current Stages Description

YTH6320R1015 18 to 30 Vac 0.6 A running Up to 3 Heat/2 Cool Heat Pump; Upto 2 Heat/ 2 Cool Conventional

Wireless Programmable FocusPRO Thermostat Kitwith Outdoor Sensor and Portable Comfort Control


Indoor Air QualityThermostatsHoneywellProgrammable ThermostatsVisionPRO 8000 Touchscreen 7-Day Programmable Thermostat

Features: • Large, Clear Display with Backlighting current temperature, set temperature and time are easy-to-read

and all are displayed on the home screen • Menu Driven Programming Guides you through the scheduling process, showing only necessary

information and choices on each screen • Ability to Select Multiple Days allows you to easily customize the thermostat for your unique schedule • Real-Time Clock keeps time during power failure; automatically updates for daylight saving time • Armchair Programming allows you to remove thermostat from wall to set the schedule • Precise Temperature Control (±1 F) reliable, consistent comfort. • Multiple HOLD options allow you to modify schedule indefinitely or for a specific time • Change Reminders reminds you to service or replace the air filter, humidifier pad, ultraviolet lamp or

thermostat batteries • Adaptive Intelligent Recovery - ensures programmed temperature is reached by programmed time • Temperature range stops - prevents user from setting the temperature too high or too low • Keypad lockout options for partial or full lockout • Programmability: 7 Day Multiple Day Programming or NonProgrammable



HeatCurrent

Description


4-9/16" H x 6"W x 1-1/4" D

10 1.0 Arunning

Premier White Universal Programmable Thermostat, 1 Heat/1 CoolStage


4-9/16" H x 6"W x 1-1/4" D

10 1.0 Arunning

Premier White Universal Programmable Thermostat, 3 Heat/2 CoolStage


4-9/16" H x 6"W x 1-1/4" D

10 1.0 Arunning

Premier White Universal Programmable Thermostat withDehumidification Control, 3 Heat/2 Cool Stage


4-9/16" H x 6"W x 1-1/4" D

10 1.0 Arunning

Premier White Universal Programmable Thermostat with Dual FuelControl, 3 Heat/2 Cool Stage


TH8110U1003/U Heat/Cool or Heat

Pump without Auxiliary Heat

R, RC, C, W (O/B), Y, G, S1, S2 Up to 1 Heat/1 Cool

Selectable: Programmable or Non-Programmable; Selectable; Heat Only or

Cool Only


Pump with AuxiliaryHeat

R, RC, W (O/B), W2 (AUX), Y, Y2, L, E, G, C, S1, S2

Up to 2 Heat/2 Cool Conventional; Up to 3

Heat/2 Cool Heat Pump

Selectable: Programmable or Non-Programmable. The L terminal is an input

or output.



R, RC, W (O/B), W2 (AUX), Y, Y2, L, E, G, C, S1, S2



Includes Dehumidification Control. Selectable: Programmable or Non-

Programmable. The L terminal is an input or output.



R, C, W (O/B), W2 (E/AUX), Y, Y2, G, L, U1, U1, S1, S2



Includes a set of Universal IAQ contacts to control humidification, dehumidification

or ventilation. Also has advanced Dual Fuel control. Selectable Programmable or Non-Programmable. The L terminal is an

input or an output.


Indoor Air QualityThermostatsHoneywellProgrammable Thermostats - Prestige Comfort System Features: • Large, easy-to-read backlit full color display shows current indoor temperature and humidity, temperature setting, date and time on

the home screen, also displays outdoor temperature and humidity on home screen (if wireless outdoor sensor is installed), Precise Temperature Control (± 1×F) for reliable and consistent temperature.

• Adjustable backlight level allows thermostat to be on full brightness at all times or dim to the brightness level of choice when the thermostat is not being used, Multiple HOLD options allows modification of schedule as needed

• Interview-Based Programming wizard to easily and confidently schedule thermostat temperatures and times • USB Port allows downloading of installer settings to quickly and consistently perform setup of thermostats in similar applications,

USB Port also allows easy setup of dealer logo and contact information on thermostat screen • Real-Time Clock keeps time during power failure; automatically updates for daylight saving time • Change Reminders to inform it is time to replace Air Filter, humidifier pad, ultraviolet bulb or batteries in connected devices ,

RedLINK Enabled to communicate with compatible wireless devices • Kit Includes Portable Comfort Control, Wireless Outdoor Sensor and Prestige™ HD Thermostat Specifications: • Comments: Tri-Lingual Display (selectable for English, French or Spanish) • Stages: Up to 3 Heat/2 Cool Heat Pump or Up to 2 Heat/2 Cool Conventional • Programmability: 7-Day Multiple Day Programming or Nonprogrammable • Humidity Setting Range: Cooling: 40 to 80% RH. Heating: 10 to 80% RH. • Terminal Designations: C, R, Rc, W-O/B, W2-AUX/E, Y, Y2, G, L, K, HUM, HUM, DHM, DHM Application: Up to 2 Heat/2 Cool Conventional Systems, Up to 3 Heat/2 Cool Heat Pumps Used With: RedLINK enabled thermostats and accessories


Prestige HD Comfort System Kit - YTHX9321R5003Part Number Color Dimensions Display Size

(Square Inch)Description

YTHX9321R5003 ArcticWhite

3-15/16" H x 6-7/8"W x 1-1/2" D

8.06 Prestige HD Comfort System Kit - Prestige HDThermostat, Portable Comfort Control andWireless Outdoor Sensor

Prestige HD Thermostat - THX9321R5000Part Number Color Dimensions Display Size


THX9321R5000 ArcticWhite

3-15/16" H x 6-7/8"W x 1-1/2" D

8.06 Prestige High Definition Color TouchscreenThermostat

Prestige HD Thermostat System Kit - YTHX9321R5012Part Number Color Dimensions Display Size



3-15/16" H x 6-7/8"W x 1-1/2" D

8.06 Prestige HD Thermostat System Kit - Prestige HDThermostat, Wireless Outdoor Sensor

Prestige SD Comfort System Kit - YTHX9321R1000Part Number Color Dimensions Display Size



3-15/16" H x 6-7/8"W x 1-1/2" D

8.06 Prestige SD Comfort System Kit - SDTouchscreen Thermostat, Portable ComfortControl and Wireless Outdoor Sensor

Prestige SD Thermostat - THX9321R1008Part Number Color Dimensions Display Size


THX9321R1008 ArcticWhite

3-15/16" H x 6-7/8"W x 1-1/2" D

8.06 Prestige Standard Definition TouchscreenThermostat


Indoor Air QualityThermostatsHoneywellProgrammable Thermostats - Prestige Comfort System Prestige SD Thermostat System Kit - YTHX9321R1011


Description


3-15/16" H x 6-7/8"W x 1-1/2" D

8.06 Prestige SD Thermostat System Kit - SDTouchscreen Thermostat, Wireless OutdoorSensor

Programmable Thermostats - Prestige IAQ Comfort SystemFeatures: • Control heating, cooling and IAQ equipment with only 2 wires at the thermostat, Heating, cooling and IAQ equipment wires to the

Equipment Interface Module • Patented interview based programming and installer setup, RedLINK wireless communication • Increase profit per job by including RedLINK accessories that provide comfort and convenience. RedLINK accessories include the

RedLINK Internet Gateway, Portable Comfort Control (PCC), Wireless Outdoor Sensor, Wireless Indoor Sensor, TrueSTEAM humidifier with Wireless Adapter and TrueZONE® zoning panel with Wireless Adapter, Configurable for residential and light commercial applications

• Light commercial - commercial language (occupied and unoccupied), schedule holidays and custom events, remote setback, economizer and time of day

• Delta T Alerts and Diagnostics informs customers when their system is not operating as expected with instructions to contact the dealer, Meets commercial code and is title 24 compliant.

• Provides a sense of security and greater comfort while generating repeat business • All Prestige IAQ 2.0 systems come standard with a return and discharge air temperature sensor to measure Delta T, Tri-lingual -

English, French and Spanish display options • Alerts and User Interactions Log - Keeps a searchable history of alerts and setting changes to the thermostat to determine if there

is a system malfunction or if the issue was caused by user error • Saves time in troubleshooting and points the technician in the right direction • Customizable Service Reminders allow dealers to remind their customers when its time to call for service, when their warranty is

expiring and to provide customized alerts • USB port for transferring Installer Setup, Customizable Reminders, Custom Events and Holidays to multiple thermostats, USB port

for adding the dealer's full color business logo on the screen • 3 assignable outputs to control humidification, dehumidification, ventilation and a stage of heating or cooling, Precise temperature

control (±1 F) for reliable and consistent temperature • 2 assignable inputs can be used with wired sensors, remote setback or dry contact devices to trip pre-packaged or custom alerts

such as a full drain pan or water leak • Multiple staging options to provide comfort or energy savings

Prestige HD Comfort System Kit - YTHX9421R5002Specifications: • Comments: Tri-Lingual Display (selectable for English, French or Spanish) • Stages: Up to 4 Heat / 2 Cool Heat Pump or Up to 3 Heat / 2 Cool Conventional • Programmability: 7-Day Multiple Day Programming or Non-Programmable • Terminal Designations: R, C then RedLINK to Equipment Interface Module Application-Up to 4 Heat/2 Cool Heat Pumps; Up to 3 Heat/2 Cool Conventional Systems Used With-RedLINK enabled thermostats and accessories Includes: THX9421R5005 Thermostat and THM5421R1005 Equipment Interface Module


Part Number Color Display Size(Square Inch)

ElectricalRatings


YTHX9421R5002 Arctic White 8.06 18 to 30 Vac 50 Hz; 60 Hz Prestige HD Comfort System Kit with Prestige IAQThermostat and Equipment Interface Module


Indoor Air QualityThermostatsHoneywellProgrammable Thermostats - Prestige IAQ Comfort SystemPrestige HD Comfort System Kit - YTHX9421R5010

Specifications:• Comments: Tri-Lingual Display (selectable for English, French or Spanish) • Stages: Up to 4 Heat / 2 Cool Heat Pump or Up to 3 Heat / 2 Cool Conventional • Programmability: 7-Day Multiple Day Programming or Non-Programmable • Terminal Designations: R, C then RedLINK to Equipment Interface Module Application- Up to 4 Heat/2 Cool Heat Pumps; Up to 3 Heat/2 Cool Conventional Systems Used With- RedLINK enabled thermostats and accessories Includes: • THX9421R5005 Thermostat • THM5421R1005 Equipment Interface Module • REM5000R1001 Portable Comfort Control • C7089R1013 Wireless Outdoor Sensor



ElectricalRatings


YTHX9421R5010 Arctic White 8.06 18 to 30 Vac 50 Hz; 60 Hz Prestige HD Comfort System Kit with Prestige IAQ Thermostat,EIM, Portable Comfort Control and Wireless Outdoor Sensor

Prestige HD Comfort System Kit - YTHX9421R5028Specifications:• Comments: Tri-Lingual Display (selectable for English, French or Spanish) • Stages: Up to 4 Heat / 2 Cool Heat Pump or Up to 3 Heat / 2 Cool Conventional • Programmability: 7-Day Multiple Day Programming or Non-Programmable • Terminal Designations: R, C then RedLINK to Equipment Interface Module Application: Up to 4 Heat/2 Cool Heat Pumps; Up to 3 Heat/2 Cool Conventional Systems Used With: RedLINK enabled thermostats and accessories Includes: THX9421R5005 Thermostat, THM5421R1005 Equipment Interface Module and C7089R1013 Wireless Outdoor Sensor



ElectricalRatings


YTHX9421R5028 Arctic White 8.06 18 to 30 Vac 50 Hz; 60 Hz Prestige HD Comfort System Kit with Prestige IAQ Thermostat,Equipment Interface Module and Wireless Outdoor Sensor


Indoor Air QualityThermostatsHoneywellProgrammable Thermostats - Prestige IAQ Comfort SystemVisionPRO IAQ Total Home Comfort System - YTH9421C1010

Specifications: • Electrical Ratings: THM5421 is rated 20 to 30 Vac • Stages: Up to 4 Heat/2 Cool Heat Pump; Up to 3 Heat/2 Cool Conventional • Programmability: 7 Day Multiple Day Programming or Non-Programmable • Terminal Designations: 1, 2, 3, C, R, Rc, Rh, R, W1-O/B, W2-Aux, W3-Aux2, Y, Y2, G, L, Out1, Out2,

In1, In2, Dats1, Dats2, Hum1, Hum2, Dhm1, Dhm2, Vnt1, Vnt2 Application: Heat/Cool or Heat Pump with Auxiliary Heat Includes: • TH9421C1004 Thermostat • THM5421C1008 Equipment Interface Module • C7089U1006 Outdoor Temperature Sensor


Part Number Color Dimensions Fan Current Supply Voltage DescriptionYTH9421C1010 Premier

White4-9/16" H x 6" W x

1-1/4" D0.6A running 20 to 30 Vac Prestige IAQ Total Home Comfort System - Automatic

or Manual changeover, 4 Heat/2 Cool Heat Pump

Thermostat Kits - RedLINK Wireless ProductsWireless FocusPRO Thermostat Kit - YTH5320R1000

Features: Wireless Focuspro Thermostat: • Same great features of the FocusPRO® thermostat - now wireless • Installs in minutes, Displays outdoor temperature and humidity • 1 year battery life, 2 month low battery warning • Dual Fuel enabled -requires C7089R1013 wireless outdoor sensor (sold separately) Equipment Interface Module (EIM): • All HVAC equipment is wired to the module • Module receives communication from the wireless devices Return Air Sensor: • Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the

wireless thermostat • Maintains 62 F for heating and 82 F for cooling RedLink Wireless Technology: • Powered by RedLINK reliability • No interference with other wireless devices in the home Specifications: • Stages: Up to 3 Heat / 2 Cool Heat Pump or Up to 2 Heat / 2 Cool Conventional • Programmability: 5-1-1 Day Program or 5-2 Day Program • Terminal Designations: C, R, Rc, Rh, W-O/B, W2-Aux/E, Y, Y2, G, L, RAS Application: Gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity




YTH5320R1000 18 to 30 Vac 0.6 A running Up to 3 Heat / 2 Cool Heat Pump orUp to 2 Heat / 2 Cool Conventional

Wireless Non-Programmable FocusPRO Thermostat Kit

Product Number Includes

YTH5320R1000 TH5320R1002 Wireless FocusPRO® Non-Programmable Thermostat; THM5320R1000 Equipment Interface Module; C7735A1000 Return Air Sensor


Indoor Air QualityThermostatsHoneywellThermostat Kits - RedLINK Wireless ProductsWireless FocusPRO Thermostat Kit - YTH5320R1008

Features: Wireless Focuspro Thermostat: • Same great features of the FocusPRO® thermostat

now wireless, 1 year battery life, Dual Fuel enabled • Displays outdoor temperature and humidity • 2 month low battery warning, Installs in minutes Equipment Interface Module (EIM): • Module receives communication from the wireless

devices, All HVAC equipment is wired to the moduleWireless Outdoor Sensor: • Reliable performance in all climates

• Installs in minutes, Up to 5 year battery life • 2 month low battery warning Return Air Sensor: • Works with the Equipment Interface Module to

maintain safe indoor temperatures if power is lost at the wireless thermostat

• Maintains 62 F for heating and 82 F for coolingRedLink Wireless Technology: • No interference with other wireless devices in

the home, Powered by RedLINK reliability Specifications: • Stages: Up to 3 Heat / 2 Cool Heat Pump or Up to 2 Heat / 2 Cool Conventional • Programmability: 5-1-1 Day Program or 5-2 Day Program • Terminal Designations: C, R, Rc, Rh, W-O/B, W2-Aux/E, Y, Y2, G, L, RAS Application: Gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity




YTH5320R1008 18 to 30 Vac 0.6 A running Up to 3 Heat / 2 Cool Heat Pump; Upto 2 Heat / 2 Cool Conventional

Wireless Non-Programmable FocusPRO Thermostat Kitwith Wireless Outdoor Sensor


YTH5320R1008 TH5320R1002 Wireless FocusPRO Non-Programmable Thermostat; THM5320R1000 Equipment Interface Module; C7735A1000 Return Air Sensor C7089R1013 Wireless Outdoor Sensor;

Wireless FocusPRO Thermostat Kit - YTH5320R1017Features: Wireless FoucsPRO Thermostat: • Same great features of the FocusPRO thermostat -

now wireless, 1 year battery life, Dual Fuel enabled. • Displays outdoor temperature and humidity. • 2 month low battery warning, Installs in minutes. Equipment Interface Module (EIM): • Module receives communication from the wireless

devices, All HVAC equipment is wired to the module.Return Air Sensor: • Works with the Equipment Interface Module to

maintain safe indoor temperatures if power is lost at the wireless thermostat.

• Maintains 62 F for heating and 82 F for cooling. RedLINK Wireless Technology: • No interference with other wireless devices in the

home, Powered by RedLINK reliability.

Specifications: • Stages: Up to 3 Heat / 2 Cool Heat Pump or

Up to 2 Heat / 2 Cool Conventional. • Programmability: 5-1-1 Day Program or 5-2

Day Program. • Terminal Designations: C, R, Rc, Rh, W-

O/B, W2-Aux/E, Y, Y2, G, L, RAS Application: • Gas, oil, electric, heat pump, forced warm air,

hot water, steam or gravity. Includes: • C7735A1000 Return Air Sensor. • THM5320R1000 Equipment Interface Module. • TH5320R1002 Wireless FocusPRO Non-

Programmable Thermostat. • C7089R1013 Wireless Outdoor Sensor. • REM5000R1001 Personal Comfort Station.


Part Number Electrical Ratings Fan Current DescriptionYTH5320R1017 18 to 30 Vac 0.6 A running Wireless Programmable FocusPRO Thermostat Kit with Wireless

Outdoor Sensor & Portable Comfort Control


Indoor Air QualityThermostatsHoneywellThermostat Kits - RedLINK Wireless ProductsWireless FocusPRO Thermostat Kit - YTH6320R1001

Features: Wireless Focuspro Thermostat: • Same great features of the FocusPRO® thermostat

now wireless, 1 year battery life, Dual Fuel enabled • 2 month low battery warning, Installs in minutes • Displays outdoor temperature and humidity • RedLink Wireless Technology: • No interference with other wireless devices in the

home, Powered by RedLINK reliability

Return Air Sensor: • Works with the Equipment Interface Module to


Equipment Interface Module (EIM): • Module receives communication from the wireless

devices, All HVAC equipment is wired to the module

Specifications: • Stages: Up to 3 Heat / 2 Cool Heat Pump or Up to 2 Heat / 2 Cool Conventional • Programmability: 5-1-1 Day Program or 5-2 Day Program • Terminal Designations: C, R, Rc, Rh, W-O/B, W2-Aux/E, Y, Y2, G, L, RAS Application: Gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity




YTH6320R1001 18 to 30 Vac 0.6 A running Up to 3 Heat / 2 Cool Heat Pump orUp to 2 Heat / 2 Cool Conventional

Wireless Programmable FocusPRO Thermostat Kit


YTH6320R1001 TH6320R1004 Wireless FocusPRO® 5-1-1 Programmable Thermostat; THM5320R1000 Equipment Interface Module; C7735A1000 Return Air Sensor

Wireless FocusPRO Thermostat Kit - YTH6320R1009Features: Wireless Focuspro Thermostat: • Same great features of the FocusPRO® thermostat

now wireless, 1 year battery life, Dual Fuel enabled • Displays outdoor temperature and humidity • 2 month low battery warning, Installs in minutes Equipment Interface Module (EIM): • Module receives communication from the wireless

devices, All HVAC equipment is wired to the moduleWireless Outdoor Sensor: • Reliable performance in all climates

• Installs in minutes, Up to 5 year battery life • 2 month low battery warning Return Air Sensor: • Works with the Equipment Interface Module to


• Maintains 62 F for heating and 82 F for coolingRedLink Wireless Technology: • No interference with other wireless devices in

the home, Powered by RedLINK reliability Specifications: • Stages: Up to 3 Heat / 2 Cool Heat Pump or Up to 2 Heat / 2 Cool Conventional • Programmability: 5-1-1 Day Program or 5-2 Day Program • Terminal Designations: C, R, Rc, Rh, W-O/B, W2-Aux/E, Y, Y2, G, L, RAS Application: Gas, oil, electric, heat pump, forced warm air, hot water, steam or gravity




YTH6320R1009 18 to 30 Vac 0.6 A running Up to 3 Heat / 2 Cool Heat Pump; Upto 2 Heat / 2 Cool Conventional

Wireless Programmable FocusPRO Thermostat Kit withWireless Outdoor Sensor


YTH6320R1009 TH6320R1004 Wireless FocusPRO 5-1-1 Programmable Thermostat; THM5320R1000 Equipment Interface Module; C7735A1000 Return Air Sensor C7089R1013 Wireless Outdoor Sensor;


Indoor Air QualityThermostatsPro1 IAQNon-Programmable ThermostatsT600 Family Mercury Free Electronic Thermostat - 0.5 sq inch Display Builder Grade

Features: • 1 Heat 1 Cool Single Stage, Non Programmable • Mercury free electronic thermostat, Intuitive set-point dial • Room temperature display, Easy access battery compartment • Electric or Gas configurable, Separate B & O terminals • Compressor Short Cycle Delay, Separate heating and cooling swing (cycle rate) adjustments • Simple private label badge system, Easy wire color coded terminal blocks • Universal sub-base, Mounts on wall or junction box • Battery or 24v power (Hardwired), Permanent memory type • 5 year warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.4°F to 2.0°F, Cooling is adjustable from

0.4°F to 2.0°F • Power Source: 18 to 30 VAC, NEC Class II, 50/60 Hz for hardwire (common wire) Battery power from 2

AA Alkaline Energizer batteries

http://pro1iaq.com

DisplayPart Number Dimensions Accuracy °F Range °F(°C) Size (Square Inch) DescriptionT601 4.4" H x 4.7" W x 1.1" D ± 1°F 41°F to 95°F

(5°C to 35°C)0.5 Non Programmable, 1H/1C Single Stage Mercury

Free Electronic Thermostat with 0.5" Display

T600 Family Thermostats - 2 sq inch Display Builder Grade, 1Heat 1CoolFeatures: • 1 Heat 1 Cool Single Stage, Non Programmable • 2 sq. inch display, Blue backlight • Glow in the dark light button, Easy access battery compartment • Electric or Gas configurable, Separate B & O terminals • Separate heating and cooling swing (cycle rate) adjustments, Room temperature calibration adjustment • 5 minute compressor delay protection (selectable on or off) • Simple private label badge system, Easy wire color coded terminal blocks • Universal sub-base, Mounts on wall or junction box • Permanent memory type, Battery or 24v power (Hardwired) • 5 year warranty Specification: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from


AA Alkaline batteries

http://pro1iaq.com

DisplayPart Number Dimensions Accuracy °F Range °F(°C) Size (Square Inch) DescriptionT601-2 4.4" H x 4.7" W x 1.1" D ± 1°F 41°F to 95°F

(5°C to 35°C)2.0 Non Programmable, 1H/1C Single Stage

Thermostat with 2" Display


Indoor Air QualityThermostatsPro1 IAQNon-Programmable ThermostatsT600 Family Thermostats - 2 sq inch Display Builder Grade, 2Heat 1Cool

Features: • 2 Heat 1 Cool Heat Pump, Non Programmable • 2 sq. inch display, Blue backlight • Glow in the dark light button, Easy access battery compartment • Electric or Gas configurable, Separate B & O terminals • Separate heating and cooling swing (cycle rate) adjustments including 2nd stage adjustments • Filter change indicator (selectable on or off), Room temperature calibration adjustment • 5 minute compressor delay protection (selectable on or off) • Simple private label badge system, Easy wire color coded terminal blocks • Universal sub-base, Mounts on wall or junction box • Permanent memory type, Battery or 24v power (Hardwired) • 5 year warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined. • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from

0.2°F to 2.0°F. • Power Source: 18 to 30 VAC, NEC Class II, 50/60 Hz for hardwire (common wire) Battery power from 2

AA Alkaline batteries.

http://pro1iaq.com


(5°C to 35°C)2.0 Non Programmable, 2H/1C Multi Stage Heat Pump


T600 Family Wireless PTAC Thermostat - 2 sq inch Display Builder GradeFeatures: • Non - Programmable, Wireless PTAC Thermostat and base module • Affordable Comfort Control, Universal 2H/1C Heat Pump or 1H/1C Conventional • Heating and Cooling Set point limits, Battery or 24v Power (Hardwired) • Electric or Gas configurable, Separate heating and cooling swing (cycle rate) adjustments • Permanent memory type, 5 year warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from


AA Alkaline batteries Base Module: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Power Source: 18 to 30 VAC, NEC Class II, 50/60 Hz, Operating ambient: 32° to +150°F • Operating humidity: 90% non-condensing maximum

http://pro1iaq.com

DisplayPart Number Dimensions Accuracy °F Range °F(°C) Size (Square Inch) DescriptionT631W-2 4.4" H x 4.7" W x 1.1" D ± 1°F 41°F to 95°F

(5°C to 35°C)2.0 Non Programmable, Wireless PTAC, Universal

2H/1C Heat Pump Thermostat with 2" Display2 heat stages for heat pump or 1 heat stage for conventional


Indoor Air QualityThermostatsPro1 IAQNon-Programmable ThermostatsT700 Family Thermostats - 4 sq inch Display Graet Value, 1Heat 1Cool

Features: • 1 Heat 1 Cool Single Stage, Non Programmable • 4 sq. inch display, Blue backlight, Glow in the dark light button • Easy access battery compartment, Electric or Gas configurable • Separate B & O terminals, Separate heating and cooling swing (cycle rate) adjustments • Room temperature calibration adjustment, 5 minute compressor delay protection (selectable on or off) • Simple private label badge system, Easy wire color coded terminal blocks • Universal sub-base, Mounts on wall or junction box • Battery or 24v power (Hardwired), Permanent memory type • 5 year warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from



http://pro1iaq.com




T700 Family Thermostats - 4 sq inch Display Graet Value, 1Heat or 1CoolFeatures: • 1 Heat only or 1 Cool only applications, Single Stage • Set point range from 25 degrees F to 90degrees F (low set point is great for garage thermostats) • Set point limits (meets building codes for garage applications) • 4 sq. inch display, Blue backlight, Glow in the dark light button • Easy access battery compartment, Heating and cooling swing (cycle rate)adjustments • Room temperature calibration adjustments, Simple private label badge system • Easy wire color coded terminal blocks, Universal sub-base • Mounts on wall or junction box, Battery or 24v power • Permanent memory type • 5 years warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.4°F to 2.0°F, Cooling is adjustable from


AA 1.5v batteries

http://pro1iaq.com


(-4°C to 32°C)4.0 Non Programmable, 1H or 1C Single Stage



Indoor Air QualityThermostatsPro1 IAQNon-Programmable ThermostatsT700 Family Thermostats - 4 sq inch Display Graet Value, 2Heat/1Cool

Features: • 2 Heat 1 Cool Heat Pump, Non Programmable, 4 sq. inch display • Blue backlight, Glow in the dark light button • Easy access battery compartment, Electric or Gas configurable • Separate B & O terminals • Separate heating and cooling swing (cycle rate) adjustments including 2nd stage adjustments • Filter change indicator (selectable on or off), Room temperature calibration adjustment • 5 minute compressor delay protection (selectable on or off), Simple private label badge system • Easy wire color coded terminal blocks, Universal sub-base • Mounts on wall or junction box, Permanent memory type • Battery or 24v power (Hardwired) • 5 year warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from



http://pro1iaq.com


(5°C to 35°C)4.0 Non Programmable, 2H/1C Multi Stage Heat Pump


T800 Family Thermostats - 8 sq inch Display Large Easy to Read NumbersFeatures: • 1 Heat 1 Cool Single Stage, Non Programmable, Extra large, easy-to-read temperature display • Auto Changeover, 8 sq. inch display, Blue backlight • Glow in the dark light button, Electric or Gas configurable • Separate B & O terminals, Separate heating and cooling swing (cycle rate) adjustments • Room temperature calibration adjustment, 5 minute compressor delay protection (selectable on or off) • Filter change indicator (selectable on or off) • Simple private label badge system, Easy wire color coded terminal blocks • Universal sub-base, Mounts on wall or junction box, Battery or 24v power • 5 year warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from



http://pro1iaq.com





Indoor Air QualityThermostatsPro1 IAQProgrammable ThermostatsT600 Family Thermostats - 2 sq inch Display Builder Grade

Features: • 5/1/1 programmable, 1 Heat 1 Cool Single Stage • Easy menu driven programming, Intuitive wake, leave, return, sleep programming icons • 2 sq. inch display, Blue backlight, Glow in the dark light button • Easy access battery compartment, Electric or Gas configurable • Separate B & O terminals, Separate heating and cooling swing (cycle rate) adjustments • Room temperature calibration adjustment, Battery or 24v power (Hardwired) • Permanent memory type, 5 minute compressor delay protection (selectable on or off) • Simple private label badge system Specification: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from



http://pro1iaq.com


(5°C to 35°C)2.0 5+1+1 Programmable, 1H/1C Single Stage


T700 Family Thermostats - 6 sq inch Display Graet Value, Compatible with Indoor & Outdoor Remote SensorFeatures: • Universal 2H/2C Conventional or 3H/2C Heat Pump • Compatible with Indoor Remote Sensor (R251S) or Outdoor Remote Sensor (R250S) • Add Indoor Sensor(s) to Move the System Sensing Point or Sense a System Average • 5/1/1 Programmable or Non-Programmable • Set Hardware Dual Fuel Balance Point with Outdoor Remote Sensor (R250S) • Tightly Control Hydronic Radiant System with Slab Sensor (R250S) • Filter Change Reminder, Room Temperature Calibration, Adjustable Temperature Swing • Programmable Fan, Battery or Hardwired, Permanent Memory Type • 5 Years Warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from



http://pro1iaq.com

DisplayPart Number Dimensions Accuracy °F Range °F(°C) Size (Square Inch) DescriptionT755S 4.4" H x 4.7" W x 1.1" D ± 1°F 41°F to 95°F

(5°C to 35°C)6.0 5+1+1 or Non Programmable, 3H/2C Universal

Thermostat with Wired Indoor, Outdoor and SlabSensors, 6" Dis.

3 heat stages for heat pump or 2 heat stages for conventional


Indoor Air QualityThermostatsPro1 IAQProgrammable ThermostatsT700 Family Thermostats - 4 sq inch Display Graet Value

Features: • Easy menu driven programming, Intuitive wake, leave, return, sleep programming icons • Blue backlight, Glow in the dark light button, Easy access battery compartment • Electric or Gas configurable, Separate B & O terminals • Separate heating and cooling swing (cycle rate) adjustments including 2nd stage adjustments • Filter change indicator (selectable on or off) • Room temperature calibration adjustment • 5 minute compressor delay protection (selectable on or off) • Simple private label badge system, Easy wire color coded terminal blocks • Universal sub-base, Mounts on wall or junction box • Permanent memory type, Battery or 24v power (Hardwired) • 5 year warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from



http://pro1iaq.com


(5°C to 35°C)4.0 5+1+1 Programmable, 1H/1C Single Stage

Thermostat with 4" DisplayT715 4.4" H x 4.7" W x 1.1" D ± 1°F 41°F to 95°F

(5°C to 35°C)4.0 5+1+1 Programmable, 2H/2C Multi Stage Gas

Thermostat with 4" DisplayT725 4.4" H x 4.7" W x 1.1" D ± 1°F 41°F to 95°F

(5°C to 35°C)4.0 5+1+1 Programmable, 2H/1C Multi Stage Heat

Pump Thermostat with 4" Display

T700 Family Thermostats - 6 sq inch Display Graet Value, Humidity ControlsFeatures: • Universal 2H/2C Conventional or 3H/2C Heat Pump • Humidity Controls, 5/1/1 programmable • Easy menu driven programming, Intuitive wake, leave, return, sleep programming icons • 6 sq. inch display, Blue backlight, Glow in the dark light button • Easy access battery compartment, Electric or Gas configurable • Separate heating and cooling swing (cycle rate) adjustments, Permanent memory type • 5 years warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from


AA Alkaline Batteries.

http://pro1iaq.com

DisplayPart Number Dimensions Accuracy °F Range °F(°C) Size (Square Inch) DescriptionT755H 4.4" H x 4.7" W x 1.1" D ± 1°F 41°F to 95°F

(5°C to 35°C)6.0 5+1+1 or Non Programmable, 3H/2C Universal Multi

Stage, Humidity Control Thermostat with 6" Display


Indoor Air QualityThermostatsPro1 IAQProgrammable ThermostatsT800 Family Thermostats - 8 sq inch Display Large Easy to Read Numbers

Features: • Extra large blue backlight screen • 7 Day or 5/1/1 progammable. • Auto Changeover • Easy menu driven programming • Intuitive wake, leave, return, sleep programming icons • 8 sq. inch display • Glow in the dark light button • Backlight button, Programmable fan • Electric or Gas configurable • Separate heating and cooling swing (cycle rate) adjustments • Room temperature calibration adjustment • Keypad lockout • Heating and cooling setpoint limits • 5 minute compressor delay protection (selectable on or off) • Filter change indicator(selectable on or off) • Simple private label badge system • Easy wire color coded terminal blocks, Universal sub-base • Mounts on wall or junction box, Battery or 24v power • 5 year warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined. • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from

0.2°F to 2.0°F. • Power Source: 18 to 30 VAC, NEC Class II, 50/60 Hz for hardwire (common wire) Battery power from 2

AA Alkaline Energizer batteries.

http://pro1iaq.com

DisplayPart Number Dimensions Accuracy

°FRange °F(°C) Size (Square

Inch)Description

T805 4.4" H x 4.7" W x 1.1" D ± 1°F 41°F to 95°F(5°C to 35°C)

8.0 7 Day or 5+1+1 Programmable, 1H/1C Single StageThermostat with 8" Display


8.0 7 Day or 5+1+1 Programmable or Non Programmable,3H/2C Universal Multi Stage with 8" Display



Indoor Air QualityThermostatsPro1 IAQProgrammable ThermostatsT900 Family - 13 sq inch Display Touchscreen Thermostats

Features: • Touchscreen, 7 Day or 5/1/1 progammable • Easy menu driven programming • Intuitive wake, leave, return, sleep

programming icons, 13 sq. inch display • Blue backlight, Glow in the dark light button • Programmable fan, Electric or Gas configurable • Separate heating and cooling swing (cycle rate)

adjustments, Keypad lockout • Room temperature calibration adjustment

• Heating and cooling setpoint limits • Auto Changeover, 5 minute compressor delay

protection (selectable on or off) • Filter change indicator(selectable on or off) • Simple private label badge system • Easy wire color coded terminal blocks • Universal sub-base • Mounts on wall or junction box • Battery or 24v power, 5 year warranty

Specifications: • Load Rating: 1 amp per terminal, Swing (cycle rate or differential): Heating is adjustable from 0.4°F to

2.0°F, Cooling is adjustable from 0.4°F to 2.0°F • Power Source: 18 to 30 VAC, NEC Class II, 50/60 Hz for hardwire (common wire) Battery power from 2

AA Alkaline Energizer batteries, 1.5 amp maximum all terminals combined

http://pro1iaq.com



Inch)Description


13.0 Touchscreen 5+1+1 or 7 Day or Non Programmable,2H/2C Multi Stage Gas, Wired Thermostat with 13" Display

T900 Family - 13 sq inch Display Touchscreen Wired ThermostatsFeatures: • Touchscreen, Extra large blue backlight screen, Filter change indicator (selectable on or off) • Backlight button. 13 sq inch display, Programmable fan, Keypad lockout, Battery or 24V power • 7 day or 5/1/1 programmable, Intuitive wake, leave, return, sleep programming icons • Room temperature calibration adjustment, Adjustable temperature swing • Separate heating and cooling swing (cycle rate) adjustments, Easy wire color coded terminal blocks • Wall mount or junction box calibration adjustment, Auto changeover , Easy menu driven programming • Multiple remote sensing points with wireless systems, Heating and cooling setpoint limits • 5 minute compressor delay protection (selectable on or off), Universal sub-base, Permanent memory

type, Heat Pump with Emergency Heat Compatible (T925, T955), 5 year warranty Specifications: • Load Rating: 1 amp per terminal, Swing (cycle rate or differential): Heating is adjustable from 0.2°F to

2.0°F, Cooling is adjustable from 0.2°F to 2.0°F • Power Source: 18 to 30 VAC, NEC Class II, 50/60 Hz for hardwire (common wire) Battery power from 2

AA Alkaline batteries, 1.5 amp maximum all terminals combined

http://pro1iaq.com



Inch)Description


13.0 Touchscreen 5+1+1 or 7 Day or Non Progr., 1H/1C SingleStage Wired Thermostat with 13" Display


13.0 Touchscreen 5+1+1 or 7 Day or Non Progr., 3H/2C MultiStage Heat Pump Wired Thermostat with 13" Display


13.0 Touchscreen 5+1+1 or 7 Day or Non Progr., 3H/2CUniversal Multi Stage Wired Thermostat with 13" Display



Indoor Air QualityThermostatsPro1 IAQProgrammable ThermostatsT900 Family - 13 sq inch Display Touchscreen Wireless Thermostats

Features: • Touchscreen, Extra large blue backlight screen • Filter change indicator (selectable on or off), Backlight button • 13 sq inch display, Easy menu driven programming • 7 day or 5/1/1 programmable, Intuitive wake, leave, return, sleep programming icons • Room temperature calibration adjustment, Adjustable temperature swing • Separate heating and cooling swing (cycle rate) adjustments • Easy wire color coded terminal blocks, Wall mount or junction box calibration adjustment • Auto changeover, Multiple remote sensing points with wireless systems • 5 minute compressor delay protection (selectable on or off) • Heating and cooling setpoint limits, Universal sub-base • Programmable fan, Keypad lockout, Battery or 24V power • Permanent memory type, Heat Pump with Emergency Heat Compatible (T925, T955) • Compatible with Conventional Systems (T905, T925), Humidity Control (T955WH) • 5 year warranty Specifications: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined • Swing (cycle rate or differential): Heating is adjustable from 0.2°F to 2.0°F, Cooling is adjustable from


AA Alkaline batteries.

http://pro1iaq.com



Inch)Description

T955W 4.4" H x 4.7" Wx 1.1" D

± 1°F 41°F to 95°F(5°C to 35°C)

13.0 Touchscreen 5+1+1 or 7 Day or Non Prog., 3H/2C Universal,Wireless Thermostat with 13" Display, Incl. Base Module

T955WH 4.4" H x 4.7" Wx 1.1" D

± 1°F 41°F to 95°F(5°C to 35°C)

13.0 Touchscreen 5+1+1 or 7 Day or Non Progr. 3H/2C Universal,Wireless Thermostat with Humidify & De-humidify, 13" Display

* 3 heat stages for heat pump or 2 heat stages for conventional Wireless accessories available for T955W and T955WH R251W is an indoor remote temperature sensor R250W is an outdoor remote temperature sensor

AccessoriesIndoor Temperature Sensor

Features: • The R251S provides a better level of comfort by averaging as many as 16 different sensing points. • Additonal indoor sensors increase the accuracy of the temperature reading throughout a home.

http://pro1iaq.com

Part Number DescriptionR251S Indoor Temperature Remote Sensor for T755S Thermostat


Indoor Air QualityThermostatsPro1 IAQAccessoriesOutdoor Temperature Sensor for T755S Thermostat

Features: • The R250S can be used as an outdoor temperature sensor to set a Dual Fuel Balance Point, this

feature chooses the most efficient heat source based on the outside temperature, at this predetermined point the system will automatically choose the best heating source to save energy.

• The R250S can also be used as a floor sensor in Radiant Heating applications. • By sensing the temperature at the heat source, this accessory greatly improves the comfort of the

space and the efficiency of the heating system.

http://pro1iaq.com

Part Number DescriptionR250S Outdoor Temperature Sensor for T755S Thermostat

Outdoor Temperature Sensor for T955WH ThermostatFeatures: • The R250W is an outdoor temperature sensor accessory and must be paired with a T955W(H). • The T955W(H) and R250W can be used to set a dual fuel balance point, which eliminates the need for

a fossil fuel.

http://pro1iaq.com

Part Number DescriptionR250W Outdoor Temperature Sensor for T955WH Thermostat

Universal Pro1 Plastic Wall Plate

Part Number DescriptionT119 Universal Pro1 Plastic Wall Plate

Wireless Indoor Remote SensorFeatures: • Wireless indoor remote sensor accessory and must be paired with a T955W(H). • The R251W communicates with the T955W(H). • Up to four R251W remote sensors can be used with each T955W(H). • The R251W can be congured to sense and display room temperature only or allow remote override.

http://pro1iaq.com

Part Number DescriptionR251W Wireless Indoor Remote Sensor for T955W Thermostat


Indoor Air QualityThermostatsPro1 IAQAccessoriesWireless Repeater

Features: • Wireless repeater, Repeat signal for wireless

thermostat, Up to 3 heat 2 cool heat pump. • Remotes and zoning system, Wirelessly hardwire,

Quick to install, Easy to connect. Specifications: • Power source: 18 to 30 VAC, NEC Class II, 50/60 Hz for hardwire (common wire).

http://pro1iaq.com

OperatingPart Number Dimensions Ambient °F(°C) Humidity Range DescriptionW150W 4.4" H x 4.4" W x .75" D +32°F to +122°F (0° to 50°C) 90% non-condensing max. Wireless Repeater

Wireless WireFeatures: • Connect up to 2 heat 2 cool conventional or

up to 2 heat 2 cool heat pump wirelessly. • Hardwire.

Applications:• Make any thermostat wireless, (up to 2H/2C

Conventional or 3H/2C Heat Pump). • Add wires to condensing unit, Add wires for a

multistage system, Anywhere else wiring is difficult. Specification: • Load Rating: 1 amp per terminal, 1.5 amp maximum all terminals combined. • Power Source: 18 to 30 VAC, NEC Class II, 50/60 Hz for hardwire (common wire).

http://pro1iaq.com

OperatingPart Number Dimensions Ambient °F(°C) Humidity Range DescriptionWW160W 4.4" H x 4.4" W x .75" D +32°F to +122°F (0° to 50°C) 90% non-condensing max. Wireless Wire - Replace any 24 volt Wire

Application without Running any Wire

White RodgersNon-Programmable Thermostats70 Series Single Stage Thermostat

Features: • Fossil fuel or electric heat compatible, Large

LCD with backlight, Electronic accuracy • Selectable Celsius or Fahrenheit temperature

display, Includes B/O terminals • Available in vertical style order 1E78-144/151

Selectable Performance Features:• Energy Mgt. Recovery for Model Number: 1F78-151 Comfort and Convenience Features: • Lighted Display - Optional Continuous Display Light

with Hardwire connection • Memory Back-Up – Battery

Applications- Gas, Oil, Electric, Millivolt Compatible Electrical Rating: • Hardwire: 20-30 VAC, NEC Class II 50/60Hz, Battery Power: 20 to 30 VAC, NEC Class II, • Terminal Load: 1.0 A per terminal, 1.5 A maximum all terminals combined • Terminals: RC, RH, W, Y, G, O, B

Part Number Dimensions Display Size (Square Inch) Single Stage Description1F78144 3-13/16" H x 5-1/8" W x 1-1/8"

D1.2 1 Heat/1 Cool 1.2" 70 Series Single Stage Thermostat,

Non-Programable, 1H/1C

Electrical Rating: Rated Differentials, Single Stage Models: Fast Slow Rated Differentials, Single Stage Models: Fast Slow

Heat (Single Stage) 0.8°F 1.5°F Heat Pump 1.2°F 1.5°F Cool (Single Stage) Fixed 1.2°F Aux./Emer. Heat 0.8°F 1.2°F


Indoor Air QualityThermostatsWhite RodgersNon-Programmable ThermostatsEmerson Blue 2" Single Stage Thermostat

Features: • Heat Pump or Single Stage models, Gas, Oil, Electric, Millivolt Compatible • Cool Savings saves energy during peak A/C demand periods • Lighted display for easier low light viewing, Dual power - hardwired and/or battery powered • Fits horizontal junction box, Air filter change indicator option Selectable Performance Features: • Energy Mgt. Recovery for Model Number: 1F80-0261 Comfort and Convenience Features: • Lighted Display: Optional Continuous Display Light w/ Hardwire connection • Permanent Memory Back-Up Electrical Rating: • Hardwire: 20-30 VAC, NEC Class II 50/60Hz • Battery Power: mV to 30 VAC, NEC Class II, 50/60 Hz or DC • Terminal Load: 1.0 A per terminal, 1.5 A maximum all terminals combined • Terminals: R, C, Y, W, G, O/B

Part Number Dimensions Display Size(Square Inch)

SetpointRange °F(°C)

Single Stage Description

1F860244 3-3/4" H x 4-3/4" W x 1-1/2" D 2.0 45 to 99°F (7to 37°C)

1 Heat/1 Cool Emerson Blue 2" Thermostat,Non-Programmable, 1H/1C Single Stage

Electrical Rating: Rated Differentials, Single Stage Models: Fast Med. Slow

Heat 0.6°F 0.8°F 1.2°F Cool 1.2°F 1.7°F

Heat Pump 0.8°F 1.2°F

Emerson Blue 4" Single Stage ThermostatFeatures: • Gas, Oil, Electric, mV and 2 or 3-Wire Zone compatible, Automatic Heat/Cool changeover option. • Keypad lockout and setpoint temperature limit options. • Dual power - hardwired and/or battery powered, Fits vertical or horizontal junction box. • Air filter change indicator option, Spanish language display models available. Selectable Performance Features: • Auto Changeover, Energy Mgt. Recovery • Set-Point Temperature Limits Adjustable Max/Min Comfort and Convenience Features: • Lighted Display - Optional Continuous Display Light with Hardwire connection • Cool Savings, Permanent Memory Back-Up Electrical Rating: • Hardwire: 20-30 VAC, NEC Class II 50/60Hz. • Battery Power: mV to 30 VAC, NEC Class II, 50/60 Hz or DC • Terminal Load: 1.5 A per terminal, 2.5 A maximum all terminals combined • Terminals: RC, RH, C, W, Y, G, O/B




1F860471 3-7/16" H x 4-7/16" W x 1-1/4" D 4.0 45 to 99°F (7to 37°C)

1 Heat/1 Cool Emerson Blue 4" Thermostat, Non-Programmable, 1H/1C Single Stage

Electrical Rating: Rated Differentials Fast Med. Slow Heat (Single Stage/Multi-Stage) 0.4°F 0.6°F 1.7°F Cool (Single Stage/Multi-Stage) 1.2°F 1.7°F Heat Pump 1.2°F 1.7°F


Indoor Air QualityThermostatsWhite RodgersProgrammable Thermostats70 Series Single Stage Thermostat

Features: • Fossil fuel or electric heat compatible, Large

LCD with backlight, Electronic accuracy • Selectable Celsius or Fahrenheit temperature

display, Includes B/O terminals • Available in vertical style order 1E78-144/151

Selectable Performance Features:• Energy Mgt. Recovery for Model Number: 1F78-151 Comfort and Convenience Features: • Lighted Display - Optional Continuous Display Light

with Hardwire connection • Memory Back-Up – Battery

Applications- Gas, Oil, Electric, Millivolt Compatible Electrical Rating: • Hardwire: 20-30 VAC, NEC Class II 50/60Hz, Battery Power: 20 to 30 VAC, NEC Class II, • Terminal Load: 1.0 A per terminal, 1.5 A maximum all terminals combined • Terminals: RC, RH, W, Y, G, O, B




1F78151 3-13/16" H x 5-1/8" W x 1-1/8" D 1.2 45 to 99°F (7to 37°C)

1 Heat/1 Cool 1.2" 70 Series Single Stage Thermostat, 7-Dayor 5+2 Day Programmable, 1H/1C

Electrical Rating: Rated Differentials, Single Stage Models: Fast Slow Rated Differentials, Single Stage Models: Fast Slow

Heat (Single Stage) 0.8°F 1.5°F Heat Pump 1.2°F 1.5°F Cool (Single Stage) Fixed 1.2°F Aux./Emer. Heat 0.8°F 1.2°F

Emerson Big Blue 12" Touchscreen Thermostat - Universal & Single Stage ModelsFeatures: • Universal models quickly configure for single stage, multi-stage or heat pump and heat pump dual fuel

systems - programmable or non-programmable, Humidity control offers humidification/dehumidification. • Commercial offers occupied damper or economizer control, Indoor remote sensor for averaging option. • Single stage model compatible with all single stage systems low voltage, 750 mV and 3-wire zone

systems, Staging control for nearly all conventional and heat pump systems. • Heat Pump dual fuel option eliminates the need for a fossil fuel kit, Automatic changeover option. • Program fan options, Keypad lockout and setpoint temperature limit options. • Outdoor remote sensor option.Add to Universal models for outdoor temp reading or, on select models,

dual fuel balance point and outdoor thermostat functions. • Dual power - hardwire and/or battery or Tripower - hardwire and/or battery with system assist. Applications- Gas, Oil, Electric, 3 Wire Zone Valve, Millivolt Compatible Selectable Performance Features: • Energy Mgt. Recovery, Keypad Lockout – Total, Partial • Set-Point Temperature Limits Adjustable Max/Min • 1 Indoor Remote Sensors Max. Number + 1 Thermostat Average and/or Weighted • 1 Outdoor Remote Sensor : Only one (1) remote sensor may be used – either Indoor or Outdoor Comfort and Convenience Features: • Lighted Display: Optional Continuous Display Light with Hardwire connection • Cool Savings, Permanent Memory Back-Up Electrical Rating: • Hardwire: 20-30 VAC, NEC Class II 50/60Hz, Battery Power: mV to 30 VAC, NEC Class II, 50/60 Hz or

DC, Terminal Load: 1.5 A per terminal, 2.5 A maximum all terminals combined • Terminals: RC, RH, C, W, Y, G, O, B, L, 6, +, S,



SingleStage

Description

1F971277 4-9/16" H x 5-13/16"W x 1-13/16" D

12.0 45 to 99°F (7to 37°C)

1 Heat/1Cool

Emerson Big Blue 12” Touch Screen Thermostat, 7-Dayor 5+1+1 Day Progr. or Non-Progr., 1H/1C Single Stage

1F951277 4-9/16" H x 5-13/16"W x 1-13/16" D

12.0 45 to 99°F (7to 37°C)

1 Heat/1Cool

Emerson Big Blue 12” Touch Screen Thermostat , 7-Dayor 5+1+1 Day Progr. or Non-Progr., Universal, 3H/2CMulti Stage

Electrical Rating Rated Differentials Fast Med. Slow Rated Differentials Fast Med. Slow

Heat (Single Stage/Multi-Stage) 0.4°F 0.6°F 1.7°F Heat Pump 0.9°F 1.2°F 1.7°F Cool (Single Stage/Multi-Stage) 0.9°F 1.2°F 1.7°F Emer. Heat 0.6°F 1.7°F †4/2 on Dual Fuel using Outdoor Remote Sensor


Indoor Air QualityThermostatsWhite RodgersProgrammable ThermostatsEmerson Blue 2" Single Stage Thermostat

Features: • Heat Pump or Single Stage models, Programmable, 5/1/1 Day, 24 Hour, 0-Day or Non-Programmable • Gas, Oil, Electric, Millivolt Compatible, Cool Savings saves energy during peak A/C demand periods • Lighted display for easier low light viewing, Dual power - hardwired and/or battery powered • Fits horizontal junction box, Air filter change indicator option Selectable Performance Features: • Energy Mgt. Recovery for Model Number: 1F80-0261 Comfort and Convenience Features: • Lighted Display: Optional Continuous Display Light w/ Hardwire connection • Permanent Memory Back-Up Electrical Rating: • Hardwire: 20-30 VAC, NEC Class II 50/60Hz, • Battery Power: mV to 30 VAC, NEC Class II, 50/60 Hz or DC • Terminal Load: 1.0 A per terminal, 1.5 A maximum all terminals combined • Terminals: R, C, Y, W, G, O/B




1F800261 3-3/4" H x 4-3/" W x 1-1/2" D 2.0 45 to 99°F (7to 37°C)

1 Heat/1 Cool Emerson Blue 2" Thermostat, 5+1+1 DayProgrammable, 1H/1C Single Stage

Electrical Rating: Rated Differentials, Single Stage Models: Fast Med. Slow

Heat 0.6°F 0.8°F 1.2°F Cool 1.2°F 1.7°F

Heat Pump 0.8°F 1.2°F

Emerson Blue 4" Single Stage ThermostatFeatures: • Programmable 7- Day, 5/1/1 Day, 5/2 Day, 0-Day or Non-Programmable. • Gas, Oil, Electric, mV and 2 or 3-Wire Zone compatible, Automatic Heat/Cool changeover option. • Keypad lockout and setpoint temperature limit options. • Dual power - hardwired and/or battery powered, Fits vertical or horizontal junction box. • Air filter change indicator option, Spanish language display models available. Selectable Performance Features: • Auto Changeover, Energy Mgt. Recovery • Set-Point Temperature Limits Adjustable Max/Min Comfort and Convenience Features: • Lighted Display - Optional Continuous Display Light with Hardwire connection • Cool Savings, Permanent Memory Back-Up Electrical Rating: • Hardwire: 20-30 VAC, NEC Class II 50/60Hz • Battery Power: mV to 30 VAC, NEC Class II, 50/60 Hz or DC • Terminal Load: 1.5 A per terminal, 2.5 A maximum all terminals combined • Terminals: RC, RH, C, W, Y, G, O/B




1F800471 3-7/16" H x 4-7/16"W x 1-1/4" D

4.0 45 to 99°F (7to 37°C)

1 Heat/1 Cool Emerson Blue 4" Thermostat, 5/1/1 Day, 5/2 DayProgrammable or Non-Programmable, 1H/1C Single Stage

Electrical Rating: Rated Differentials Fast Med. Slow Heat (Single Stage/Multi-Stage) 0.4°F 0.6°F 1.7°F Cool (Single Stage/Multi-Stage) 1.2°F 1.7°F Heat Pump 1.2°F 1.7°F


Indoor Air QualityThermostatsWhite RodgersProgrammable ThermostatsEmerson Blue Easy Reader Thermostat

Features: • Universal models quickly configure for single stage, multi-stage or heat pump and heat pump duel fuel

systems - programmable or non-programmable, Easy Reader model is easy to read and easy to use. • Commercial offers occupied damper or economizer control and locking cover and subbase. • Staging control for nearly all conventional and heat pump systems. • Single stage model compatible with all single stage systems low voltage, 750 mV and 3-wire zone

systems, Heat Pump dual fuel option eliminates the need for a fossil fuel kit. • Automatic changeover option, Program fan options. • Keypad lockout and setpoint temperature limit options, Indoor remote sensor for averaging option. • Outdoor remote sensor option on select Universal models for outdoor temperature reading and dual fuel

balance point or outdoor thermostat function (select models). • Dual power - hardwire and/or battery or Tripower - hardwire and/or battery with system assist. • Applications- Gas, Oil, Electric, 3 Wire Zone Valve, Millivolt Compatible. Selectable Performance Features: • Energy Mgt. Recovery, Dual Fuel Heat Pump Control – Logic • Set-Point Temperature Limits Adjustable Max/Min Comfort and Convenience Features: • Lighted Display - Optional Continuous Display Light with Hardwire connection • Cool Savings, Permanent Memory Back-Up Electrical Rating: • Hardwire: 20-30 VAC, NEC Class II 50/60Hz • Battery Power: mV to 30 VAC, NEC Class II, 50/60 Hz or DC • Terminal Load: 1.5 A per terminal, 2.5 A maximum all terminals combined • Terminals: RC, RH, C, G, Y, Y2, W/E, W2, O/B, L




1F95EZ0671 4-3/16" H x 6-1/2"W x 1-5/8" D

6.0 45 to 99°F (7to 37°C)

1 Heat/1 Cool Emerson Blue 6" Easy Reader Thermostat, 7 DayProgrammable or Non-Programmable, 4H/2C Multi Stage

Electrical Rating: Rated Differentials, Universal Models Fast Slow

Heat (Single Stage/Multi-Stage) 0.6°F 1.2°F Cool (Single Stage/Multi-Stage) 1.2°F 1.7°F

Heat Pump 1.2°F 1.7°F Emer. Heat 1.2°F 1.7°F

UV LightSanuvoxAir SterilizationReplacement Parts

Part Number DescriptionBST120/277GL Multi Voltage Ballast 120 to 277 Automatic Sensing for use in R Plus +, R1700 and

R4000LMPHGXJ105 T6 Dual Zone High Intensity 10.5” UV “J” Lamp for R Plus + and R4000-GXLMPHGJ105 T6 High Intensity Germicidal 10.5” UV “J” Lamp for R Plus-G and R4000-GCVRTUBTURB6 Turbulator for R4000 and R Plus +BST110/240G18 120/230 volt Ballast for R1500 & R3500


Indoor Air QualityUV LightSanuvoxAir SterilizationSANUVOX R+

The Sanuvox R+ represents an evolution in UV In-Duct Air Treatment. The high-efficiency patented design destroys airborne bio-chemical contaminants while providing important user information on the 3” Back-Lit LCD display. Installed into the return or supply plenum, the Sanuvox proprietary process maximizes dwell (contact) time between the air and UV energy. With the ability to treat homes up to 4,000 sq.ft., the Sanuvox R+ represents the very best in UV Air Purification. Features: • Whole home system designed to destroy viruses, germs, bacteria, mold,chemicals, odors, allergens &

VOCs • Patented process incl. High-Intensity 19mm UVC/UVV ‘J’ Lamp (18” arc length), Turbulator and

Reflecting Chamber mounted parallel to the airflow, Most advanced air treatment system available • Intelligent ballast automatically switches from 110V to 240V • Microprocessor controlled Thermistor for automatic operation • UV Chamber rotates 360 degrees for up-flow or down-flow systems • Ductboard kit included, 3 year warranty including UV Lamp • CSA C/US Certified & CE Approved 3” LCD Back-Lit Display provides: • Real-Time system status, ‘Days Left’ until UV Lamp replacement (3 years) • Countdown purifier animation • ‘Lamp Out’ & ‘Ballast Out’ visual alarms • ‘Contractor Call-Back’ indicator

http://www.sanuvox.com/en/index.php

Part Number DescriptionR Plus + In-duct Mounted UV Air Treatment System for homes up to 4000 sq. ft. 120 /230 volt

Coil SterilizationReplacement Parts

Part Number DescriptionBST24G48 24 Volt Ballast for SABER12/24-G & SABER16/24-G & SABER18/24-GBST24G48M 24 Volt Ballast for SABER16/24-GMLMPRGPT120 T6 Germicidal (UVC) 12” Straight for SABER12/24-GLMPRGPT150 T6 Germicidal (UVC) 16” Straight for SABER16/24-GLMPRGPT180 T6 Germicidal (UVC) 18” Straight for SABER18/24-GLMPRGPT160T5 T5 Germicidal (UVC) 16” Straight for SABER16/24-GMMSCCON1 Gaynor Plug for UV Lamp


Indoor Air QualityUV LightSanuvoxCoil SterilizationSABER GENIUS 24/110V

The proprietary Sanuvox Saber Genius 24V/110V UV Object Purifier is designed to bask the evaporator coil with UVC Germicidal Energy, preventing and destroying mold, biological odors and other microbial contaminants. A coil with bio-film (a coating of microbial growth) acts as an adhesive, attracting dirt and coating the fins of the coil. This typically results in an odor emanating from the equipment and a loss in energy efficiency as the equipment must work harder to provide the same air temperature. The Saber Genius operates on 24 volts and includes a 110 volt stepdown transformer should there not be a sufficient 24V source available. Features: 16” UVC Germicidal Coil Cleaner: • Destroys mold & their associated odors on the coil • Improve energy efficiency • 24V & 110V with included step-down transformer • Intelligent Voltage Protection (IVP): protects the A/C system from electrical overload • 1 year warranty including UV Lamp • ETL Approved 3” LCD Back-Lit Display provides: • Real-Time system status • ‘Days Left’ until UV Lamp replacement (1 year) • Countdown purifier animation • ‘Lamp Out’ & ‘Ballast Out’ visual alarm • ‘Contractor Call-Back’ indicator • Intelligent Voltage Protection indicator

http://www.sanuvox.com/en/index.php

Part Number DescriptionSABER16/24-GM 16’’ UVC Germicidal Coil Clean System


Indoor Air Quality 73


SPRING/SUMMER 2013


Installation SuppliesACR Copper RollsJMFRefrigeration Tube

Features: • Copper Tubing in type – ACR • Meets ASTM and NSF requirements

http://www.jmfcompany.com/product/linesets.php

Part Number Copper Tube (OD) Length Wall Thickness Description98031555040 1/4" 50’ .030 1/4" Copper Refrigeration Tube, 50 Foot98031555080 3/8" 50’ .032 3/8" Copper Refrigeration Tube, 50 Foot98031555100 1/2" 50’ .032 1/2" Copper Refrigeration Tube, 50 Foot98031555120 5/8" 50’ .035 5/8" Copper Refrigeration Tube, 50 Foot98031555140 3/4" 50’ .035 3/4" Copper Refrigeration Tube, 50 Foot98031555160 7/8" 50’ .045 7/8" Copper Refrigeration Tube, 50 Foot98031555180 1-1/8" 50’ .050 1-1/8" Copper Refrigeration Tube, 50 Foot

Anchors DiversiTech/DevcoAnchor Kit

Part Number Description7101CX Anchor Kit Yellow, 8" x 1" with 3/16" Bit 100s + 100a7102CX Anchor Kit Red 10" x 1-1/4" with 1/4" Bit 100s + 100a7103CX Anchor Kit Blue 4 x 3/4" with 5/32" Bit 100s + 100a

540-AK100

Part Number Depth Height Width Weight (lbs) Description540-AK100 7.75" 1.5" 3.5" 1 Anchor Size 1/4 x 1, Screw Size 10 x

1-1/4 HWH, Head Size 5/16 Hex

7111CX

Part Number UOM Description7111CX BG Plug Anchor Kit Blue 14" x 1" with 5/16" Bit 100s +100a, Bag

1 Installation Supplies 1

Installation SuppliesBlocks with Adjustable ScrewsMarsEasy Leveler Furnace Legs

Features: • Designed to level a furnace & air conditioning coil for proper drainage • Proper leveling helps eliminate standing water, thus reducing bacteria • Easily adjustable even after installation, Legs can support up to 400 lbs. • Adjustable from 2-3/4” to 4” in height Includes: 4 easy leveler legs & sheet metal screws


Part Number Mars Pack UOM Description79095 12 EA Easy Leveler Furnace Legs, 4

BrushDiversiTechChip Brush

Part Number Height Width Depth Weight (lbs) DescriptionB-501 0.25" 1" 7.25" 0.04" 1" Chip Brush

Bulk Pack Nylon FittingsBramecAdapterBarb x MPT

• For vinyl, supertube & other plastic tubings • Attractive skin display packaging

http://www.bramec.com

Part Number Connection Std Qty UOM DescriptionTAA2416 3/4" MPT x 1/2" Barb 100 EA Nylon Adapter, 3/4" MPT x 1/2" Barb

Elbow • For vinyl, supertube & other plastic tubings • Attractive skin display packaging http://www.bramec.com

BarbPart Number Connection Std Qty UOM DescriptionTEC1616 1/2 Barb x 1/2 Barb 100 EA Nylon Elbow, 1/2 Barb x 1/2 Barb


Installation SuppliesBulk Pack Nylon FittingsBramecElbowBarb x FPT

Part Number Connection Std Qty UOM DescriptionTEB2416 3/4 FPT x 1/2 Barb 100 EA Nylon Elbow, 3/4 FPT x 1/2 BarbTEB2420 3/4 FPT x 5/8 Barb 100 EA Nylon Elbow, 3/4 FPT x 5/8 Barb

Barb x MPTPart Number Connection Std Qty UOM DescriptionTEA2416 3/4 MPT x 1/2 Barb 100 EA Nylon Elbow, 3/4 MPT x 1/2 BarbTEA2420 3/4 MPT x 5/8 Barb 100 EA Nylon Elbow, 3/4 MPT x 5/8 Barb

TeeBarb x Barb x Barb

• For vinyl, supertube & other plastic tubings • Attractive skin display packaging


Part Number Connection Std Qty DescriptionTTA161616 1/2" Barb x 1/2" Barb x 1/2" Barb 100 Nylon Tee, 1/2" Barb x 1/2" Barb x 1/2" BarbTTA202020 5/8" Barb x 5/8" Barb x 5/8" Barb 100 Nylon Tee, 5/8" Barb x 5/8" Barb x 5/8" Barb

CaulkDiversiTechSealing Compounds, AdhesiveAluminum Silicone Sealant

Part Number Height Width Depth Weight (lbs) Description7-4200 11.25" 1.75" 1.75" 0.8 Aluminum Silicone Sealant – 10.3 Fl. Oz. Tube

Caulk Gun – Super Ratchet Type

Part Number Height Width Depth Weight (lbs) Description7-100 2.5" 7.5" 13" 1.7 Caulk Gun – Super Ratchet Type


Installation SuppliesCaulkDiversiTechSealing Compounds, AdhesiveSilicone Sealant

Part Number Height Width Depth Weight (lbs) Description7-4000 11.25" 2" 2" 0.8 Clear Silicone Sealant – 10.3 Fl. Oz. Tube7-4100 11.25" 2" 2" 0.77 White Silicone Sealant – 10.3 Fl. Oz. Tube7-4300 11.25" 2" 2" 0.8 High Temp Red Silicone Sealant – 10.1 Oz.

Cartridge

Caulk/Duct SealantDiversiTechSealing Compounds, AdhesivePro-Air Duct Sealant

Part Number Height Width Depth Weight (lbs) Description800-009 7.75" 7.5" 7.5" 12.2 Pro-Air Duct Sealant - 1 Gallon Pail

Condensate Drain GunDiversiTechCharles Gallo Brand Drain Gun Hose Assembly

Features: • The Charles Gallo Drain Gun is a lightweight, portable tool designed to blow out condensate drain lines

instantly • Simply insert a Swoosh CO2 cartridge into the Charles Gallo Drain Gun and with a press of the trigger -

Swoosh - 800 psi of oil free food grade air clears the line • The Charles Gallo Drain Gun packs cleaning power into a small, lightweight package, preventing the

need for carrying heavy air or nitrogen tanks • The Gallo Gun uses carbon dioxide (CO2), a common component of air, and is totally safe for use in the

environment • The Charles Gallo Drain Gun is a perfect alternative to the environmentally unfriendly practice of using

refrigerant to clean the drain line • Its flexible hose assembly enables you to maneuver through cabinets, coils, and hard to reach drains • An adapter kit is also available to allow for use on oil burner lines and tighter areas with a 90º fitting


Part Number Height Width Depth Weight (lbs) DescriptionGG-1H 1.1" 1.1" 16.54" 0.14 Charles Gallo Drain Gun Hose Assembly

SWOOSH CO2 Cartridges

Part Number Height Width Depth Weight (lbs) DescriptionGGC-12 8" 1.75" 2.75" 1.625 SWOOSH CO2 Cartridges, Pack of 12


Installation SuppliesCondensate HoseDiversiTechClear Vinyl Tubing

Part Number Height Width Depth Weight (lbs) Description7-12 6.25" 17.5" 17.5" 7.6 1/2" ID Clear Vinyl Tubing7-34 6.75" 21.25" 20.75" 15.4 3/4" ID Clear Vinyl Tubing7-58 6.75" 17.5" 17.5" 10 5/8" ID Clear Vinyl Tubing

Mini Split Condensate Drain Line

Part Number Height Width Depth Weight

(lbs)Description

230-DL16 9.25" 16" 15.5" 6.6 5/8". ID Mini-Split Drain Condensate Line, 160’ Roll230-DL20 9.25" 16" 15.5" 6.6 3/4". ID Mini-Split Drain Condensate Line, 160’ Roll

Condensate Pump DiversiTechCP-22 Condensate Pumps

Features: • DiversiTech CP-22 series pumps beat the industry standard of 20’ lit height by 2 feet and come with

innovative features such as: vibration dampening feet and motor mounts, stainless steel hang tabs, four inlet holes (and 3 poly covers for the unused), LED indicators, float switch and duckbill-style check valve, an algaecide tablet dispenser, plug protector, and detailed installation instructions

• Three terminals are provided allowing the installer flexibility to connect air-handler shut-down and optional alarm as needed - an important safety consideration

• CP-22 is available with 20’ of 3/8” tubing as well Included Accessories: • Instruction Sheet • Stainless Steel Hang Tabs • Plug Protector • Algaecide Tablet Dispenser • 4’ Remote Shutof Leads with insulated terminals • Polyethelene inlet covers (3) Specifications: Maximum Condensate Temperatures Continuous duty 140o F Maximum inlet temperature 160o F Not suitable for contact with steam or gasses that exceed 160o F


Part Number Volts Height Width Depth Weight (lbs) DescriptionCP-22 120 6.75" 6" 12" 5.02 CP-22 Condensate Pump, 22’ Lift, 120VCP-22T 120 9" 7.75" 12.25" 6.2 CP-22 Condensate Pump, 22’ Lift, with 20ft. of 3/8in. CVT, 120VCP-22-230 230 6.75" 6" 12" 5 CP-22 Condensate Pump, 22’ Lift, 230VCP-22-230T 230 9.63" 7.75" 12.25" 6.58 CP-22 Condensate Pump, 22’ Lift, with 20ft. of 3/8in. CVT, 230V


Installation SuppliesCondensate Pump Little GiantAutomatic Condensate Removal Pump65 GPH

Features: • 1/2 gallon collection tank • Vertical centrifugal pump design • Automatic start and stop operation • Some models equipped with float (solid polymer) activated switch for automatic high level water

detection (safety overflow switch) • For models with safety overflow switch: dual function NO and NC operation (set to NO from factory for

equipment shut down connection) • Models equipped with safety overflow switch include two 5” switch lead wires • 3/8” O.D. barbed discharge adapter with built-in check valve • Three 1-1/8” diameter inlet openings (two fitted with removable cap plug) • Thermally protected, fan cooled motor • Built-in wall mount tabs on tank • Removable pump float locking tab for safety during transportation (remove at time of installation) • Maximum water temperature: 140 0F • 6 ft, 3-conductor cable with grounded 3-prong plug • Some models include 20’ x 3/8” I.D. vinyl discharge tubing Applications: • Designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical • Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment Specifications: • Housing/tank cover - ABS • Motor cover - ABS • Volute - ABS • Tank - ABS • Impeller - Glass filled polypropylene • Check valve – Acetal

http://little-giantpump.com

a

Part Number HP Volts Amps Shutoff (PSI) Weight (lbs) DescriptionVCMA-15UL 1/50 115 1 6.5 4.40 65 GPH Automatic Condensate Removal PumpVCMA-15ULS 1/50 115 1 6.5 4.40 65 GPH Automatic Condensate Removal Pump with Safety Switch

Dimensions:

Specifications: Performance (GPH@Head) Model

No. 1' 5' 10' 20' VCMA-15UL 65 50 25 0

VCMA-15ULS 65 50 25 0


Installation SuppliesCondensate Pump Little GiantAutomatic Condensate Removal Pump80 GPH

Features: • Low profile for limited spaces • Vertical centrifugal pump design • Automatic start, stop and high level water detection (safety overflow switch) • 3/8" O.D. barbed discharge adapter with built-in check valve (installed on the pump) • 1/4” O.D. barbed discharge adapter (included in the box) • Two inlet openings (one 1.0” and one 1-1/8” diameter) • Safety overflow float activated switch • Two 5” safety overflow switch lead wires • Thermally protected, fan cooled motor • Built-in wall mount tabs • Intermittent liquid temperature up to 120 0F • 20' shut-off head • 6 ft, 3-conductor cable with grounded 3-prong plug (115 V and 230 V models) Applications: • Designed for automatic collection and removal of condensate from air conditioning, refrigeration

and dehumidification equipment when gravity drainage is not possible or practical • Also suitable for high efficiency oil and gas-fired condensing furnace equipment Construction: • Motor - 1/30 hp • Discharge - 3/8" O.D. barbed • Housing/tank cover - ABS • Motor Cover - ABS • Volute - ABS • Tank - ABS • Impeller - Glass filled polypropylene • Check valve – Acetal

http://little-giantpump.com

Part Number HP Volts Amps Shutoff (PSI) Weight (lbs) DescriptionVCC-20ULS 1/30 115 1.5 8.6 5.40 VCC-20ULS, 80 GPH Automatic Condensate Removal Pump

with Safety Switch Dimensions:

Specifications: Performance (GPH@Head) Model

No. 1' 5' 10' 20' VCC-20ULS 80 70 45 0


Installation SuppliesCondenser PadsDiversiTechHeat Pump Pad

Features: • The Heat Pump Pad provides an effective base for heat pump equipment installed in snowy climates. • Rather than a combination of a typical 2” (or 3”) equipment pad and 6” heat pump risers, the Heat

Pump Pad provides a full 8” of elevation in a simple 36” by 36” footprint. • The star pattern of the integral risers allow for installation of equipment with different size footprints up

to 36” X 36”. • Included with the Heat Pump Pad are eight anti-vibration pads uniquely designed to fit into the guide

slots on the top of the integral risers. • The base of the Heat Pump Pad is sloped outward to allow for easy drainage of condensate or defrost

cycle condensate when the outdoor coil is operating in heat pump mode. • The Heat Pump Pad easily nests allowing for efficient shipping, transportation, and warehousing. • Injection molded from concrete gray, recycled polypropylene material, the Heat Pump Pad is friendly

to environment, and designed to last longer than the equipment it supports.


Part Number Height Width Depth Weight (lbs) DescriptionHP3636-8 8" 36" 36" 16.5 Heat Pump Pad, 36 x 36 x 8, 17# per Pad

Ultralite Pads

Part Number Size DescriptionSC2424 24" x 24" x 2" Ultralite Condenser Pad 24" x 24" x 2"SC2430 24" x 30" x 2" Ultralite Condenser Pad 24" x 30" x 2"SC3030 30" x 30" x 2" Ultralite Condenser Pad 30" x 30" x 2"SC3036 30" x 36" x 2" Ultralite Condenser Pad 30" x 36" x 2"SC3636 36" x 36" x 2" Ultralite Condenser Pad 36" x 36" x 2"SC3648 36" x 48" x 2" Ultralite Condenser Pad 36" x 48" x 2"SC4147 41" x 47" x 2" Ultralite Condenser Pad 41" x 47" x 2"


Installation SuppliesCondenser Wall BracketsDiversiTechWall BracketsAir Conditioner Mounting Brackets

Features: • These heavy duty 12 gauge steel AC brackets are perfect for hanging A/C condensers and heat pumps

outside the home • Mount at any height to allow for easy maintenance under units • No need to wait for finished grade or landscaping prior to installation of AC unit • Pre-punched 17/32” holes will accommodate 1/2” bolts for easy installation • Powder coated gray finish Application • Air conditioning condensers


Part Number Height Width Depth Weight (lbs) DescriptionACB-30 4" 18.5" 36.5" 16.28 AC Mounting Bracket - 30", Pack of 2ACB-36 3.5" 17" 37" 19.42 AC Mounting Bracket - 36", Pack of 2ACB-42 2.25" 17.75" 42.75" 14.8 AC Mounting Bracket - 42", Pack of 2

Dimension:

Model No. A B C ACB-30 30” 16” 34” ACB-36 36” 16” 39” ACB-42 42” 16” 43”


Installation SuppliesCopper Tube InsulationK-FlexInsul-Tube

Features: • INSUL-TUBE is a flexible, closed-cell elastomeric tube insulation product used to conserve energy and

prevent condensation on piping applications. • The product's closed-cell structure creates exceptional thermal properties (k-value of 0.245 at 75F and

wvt of .03 perm-in) that protect against moisture penetration in applications within a -2970F to +2200F temperature range.

• It is available in 6’ lengths in a range of wall thicknesses ranging from 3/8" to 2” and is 25/50-rated, according to ASTM E-84 standards for surface burning characteristics of building materials, up to 2" wall thickness.

• INSUL-TUBE is non-porous, non-fibrous and resists mold, fungal and bacterial growth. • For added protection, it is protected with an EPA-approved antimicrobial agent. • INSUL-TUBE is GREENGUARD certified under the Children and Schools classification and is

approved through supervision by the Factory Mutual Research Corporation. Applications: • Air-conditioning • Refrigeration • Chilled Water • Hot / Cold Water • OEM • Dual Temperature Piping

Physical Properties Mean Temperature Insul-Tube Test Methods Thermal Conductivity (K) BTU - in/hr - Ft2- 0F (W/mK)

900F (320C) 750F (240C)

0.258 (0.0372) 0.245 (0.0353)

ASTM C 177/C 518 ASTM C 177/C 518

Density 3-6 PCF ASTM D 1622/D 3575Operating Temperature Range (Flexible to -400F (-400C))

-2970F (-1820C) to +2200F 1040C)

Water Vapor Permeability Dry Cup. Perm-In 0.03 ASTM E 96

Water Absorption % (Volume Change) 0 ASTM C 209

Flame Spread / Smoke Developed (up to 2” wall) <25/50 ASTM E 84

Ozone Resistance Pass ASTM D 1171

Chemical/Solvent Resistance Good

Mildew Resistance/Air Erosion Pass UL 181

UV Weather Resistance Pass QUV Chamber Test

http://www.kflexusa.com

Part Number Insulation Nominal ID Length Wall Thickness Weight (lbs) Description6RX048038 3/8" 6’ 1/2" 30 3/8" Insul-Tube Copper Tube Insulation6RX048048 1/2" 6’ 1/2" 28 1/2" Insul-Tube Copper Tube Insulation6RX048058 5/8" 6’ 1/2" 31 5/8" Insul-Tube Copper Tube Insulation6RX048068 3/4" 6’ 1/2" 30 3/4" Insul-Tube Copper Tube Insulation6RX048078 7/8" 6’ 1/2" 29 7/8" Insul-Tube Copper Tube Insulation6RX048118 1-1/8” 6’ 1/2" 24 1-1/8” Insul-Tube Copper Tube Insulation


Installation SuppliesElectricalDiversiTechConnectorsWire Connectors - Screw-On

Part Number Height Width Depth Weight (lbs) Description DVT623001 1.25" 2.75' 3" 0.15 Gray Screw-On, Size 71B, #22 to #16 AWG, 300V Max. 100/Box DVT623002 1.25" 2.74" 4.75" 0.2 Blue Screw-On, Size 72B, #22 to #16 AWG, 300V Max. 100/Box DVT623003 2" 3.25" 5' 28.8 Orange Screw-On, Size 73B, #22 to #14 AWG, 600V Max.100/Box DVT623004 2.75" 2.75" 6.5" 0.4 Yellow Screw-On, Size 74B, #18 to #10 AWG, 600V Max.100/Box DVT623005 2.25" 3.75" 6.75" 0.6 Red Screw-On, Size 76B, #18 to #10 AWG, 600V Max. 100/Box

Disconnects

Part Number Amps Phase DescriptionSFD30 30 1 30A Fused Disconnect, Single PhaseSFD60 60 1 60A Fused Disconnect, Single Phase83315 60 1 60A Non-Fused Disconnect, Single Phase83308 60 60A Non-Fused Disconnect with GFCI Receptacle

Duplex PlugsElectrical Duplex Receptacles

Part Number Height Width Depth Weight (lbs) Description620-701 1" 1.5" 4" 0.2" Electrical Duplex Receptacles

Electrical Box CoverFlat Blank Cover

Part Number Height Width Depth Weight Description620-254 0.25" 2.5" 4.25" 0.2" 2 x 4 Blank Utility Box Cover620-406 0.25" 4.25" 4.25" 0.4" 4 x 4 Blank Utility Box Cover


Installation SuppliesElectricalDiversiTechElectrical Box CoverFlat, Toggle Switch Cover

Part Number Height Width Depth Weight (lbs) Description620-253 0.25" 2.5" 4.25" 0.2" 2 x 4 Switch /Fuse Box Cover

Electrical BoxesElectrical Outlet Box

Part Number Height Width Depth Weight (lbs) Description620-403 1.75" 4" 4" 0.6" 4" x 4" x 1/2" Electrical Outlet Box620-201 2.13" 1.88" 4" 0.47" 2-1/8" x 4" x 1-7/8" Deep Electrical Outlet Box620-202 2.25" 2.25" 4" 0.4" 2-1/8" x 4" x 1-2-1/8" Deep Electrical Outlet Box620-401 2.25" 4" 4" 0.8" 4" x 4" x 2-1/8" Deep Electrical Outlet Box

FusesBlade Fuses


(lbs)Description

626-AT0003 0.25" 1.25" 1.5" 0.0060 Blade Fuse - 3 Amp - Purple, Pack of 5626-AT0005 0.25" 1.25" 1.5" 0.0060 Blade Fuse - 5 Amp - Tan, Pack of 5

Dual Element Fuses - 250V

Part Number Volts Amps Height Width Depth Weight

(lbs)Description

7-CRNR15 250 15 0.5" 0.5" 2" 0.2 Dual Element Fuse - 250V, Time Delay, 15Amps7-CRNR20 250 20 0.5" 0.5" 2" 0.2 Dual Element Fuse - 250V, Time Delay, 20Amps7-CRNR25 250 25 0.5 0.5" 2 0.2 Dual Element Fuse - 250V, Time Delay, 25Amps7-CRNR30 250 30 0.5" 0.5" 2" 0.2 Dual Element Fuse - 250V, Time Delay, 30Amps7-CRNR35 250 35 3" 0.75" 0.75 0.2 Dual Element Fuse - 250V, Time Delay, 35Amps7-CRNR40 250 40 3" 0.75" 0.75" 0.2 Dual Element Fuse - 250V, Time Delay, 40Amps7-CRNR45 250 45 0.75" 0.75" 3" 0.2 Dual Element Fuse - 250V, Time Delay, 45Amps7-CRNR50 250 50 3" 0.75"` 0.75 0.1265 Dual Element Fuse - 250V, Time Delay, 50Amps7-CRNR60 250 60 3" 0.75" 0.75 0.2 Dual Element Fuse - 250V, Time Delay, 60Amps


Installation SuppliesElectricalDiversiTechHomeline Circuit Breakers

Part Number Amps Width Depth Height Weight

(lbs)Description

625-GD15H 15A 2" 2.75" 3" 0.6 Homeline Circuit Breaker, Two Pole, 15A, Square D625-GD20H 20A 2" 3" 3" 0.4 Homeline Circuit Breaker, Two Pole, 20A, Square D625-GD30H 30A 2" 3" 3" 0.6 Homeline Circuit Breaker, Two Pole, 30A, Square D625-GD40H 40A 3.25" 2" 2.5" 0.6 Homeline Circuit Breaker, Two Pole, 40A, Square D625-GD50H 50A 3.25" 2" 2.5" 0.6 Homeline Circuit Breaker, Two Pole, 50A, Square D625-GD60H 60A 2" 3" 3" 0.8 Homeline Circuit Breaker, Two Pole, 60A, Square D625-GD100 100A 2.25" 3.75" 3.5" 0.8 Homeline Circuit Breaker, Two Pole, 100A, Square D625-GS15H 15A 3" 3" 1" 0.28 Homeline Circuit Breaker, Single Pole, 15A, Square D625-GS20H 20A 3" 1.5" 1.5" 0.8 Homeline Circuit Breaker, Single Pole, 20A, Square D625-GS30H 30A 3" 1" 2.5" 0.2 Homeline Circuit Breaker, Single Pole, 30A, Square D625-GS40H 40A 3.25" 1" 2.5" 0.4 Homeline Circuit Breaker, Single Pole, 40A, Square D625-GS50H 50A 3" 3" 0.75" 0.2 Homeline Circuit Breaker, Single Pole, 50A, Square D

Jumper WiresFlexible Test Leads

Part Number Description5046 Flexible Test Leads, Steel Alligator Clips with Vinyl Red and Black Insulators, 36"

20 Gauge Wire

Plug CoverFlat, Two Duplex Receptacle Cover

Part Number Height Width Depth Weight (lbs) Description620-252 0.25" 2.5" 4.25" 0.2" Flat, Two Duplex Receptacle Cover

Sealtite Fittings

Part Number Size DescriptionLT-50P 1/2" 1/2" Straight ConnectionLT591 1/2" 1/2" 90° ConnectionN1311 1/2" 1/2" Box Connectors (25/pkg)N1320 1/2" Romex 1/2" Wire Connectors (25/pkg)S12NMS 1/2" 1/2" Sealtite 100’ Roll


Installation SuppliesElectricalDiversiTechTest LeadsLow Voltage Test Leads

Part Number Height Width Depth Weight (lbs) Description5031 2" 5.25" 7.5" 0.4" Low Voltage Test Leads, 22" Long, Color-Coded Leads

with Fully Insulated Alligator Clips, 8 Pcs

Wall PlateBlank Cover with 1/2" Mounting Screws

Part Number Height Width Depth Weight (lbs) Description625-2129v 0.25" 3.75" 5.25" 0.2" Blank Cover, Ivory with 1/2" Mounting Screws

Wall Switch20A-1 HP Toggle Switch

Part Number Height Width Depth Weight (lbs) Description620-601 1.75" 1.25" 4.25" 0.2" 20A-1 HP Toggle Switch, 120V, Single Pole, Ivory

WhipsDiversiWhips


(lbs)Description

6-12-4NM 1.5" 8.5" 9" 1.4 1/2" x 4’ #10 THHN Wire - Non-Metallic Connectors6-12-6NM 2" 12" 17" 1.7 1/2" x 6’ #10 THHN Wire - Non-Metallic Connectors


Installation SuppliesElectricalHoneywell CableThermostat Cables

Features: • Sequential Footage Markings on Spools • Braided Ripcord Applications: Wiring of Thermostat Controls, Heating and Air Conditioning Equipment, doorbells, as well as other Low Voltage Applications. Sunlight Resistant except CL2P Construction: Copper Conductors, Polypropylene Insulation, Polyvinyl-Chloride Jacket Code Restrictions: OK for use with all Power-Limited Circuits except those in Risers and Plenums


Part Number Color Coating Length Type Description47104807 Brown Jacket PVC Coated 500’ Solid 18/2 Solid Thermostat CL2 Cable, Reel, Brown, 4 x 500 ft. Reel47114807 Brown Jacket PVC Coated 500’ Solid 18/3 Solid Thermostat CL2 Cable, Reel, Brown, 4 x 500 ft. Reel47120307 Brown Jacket PVC Coated 250’ Solid 18/4 Solid Thermostat CL2 Cable, Reel, Brown, 4 x 250 ft. Reel47130307 Brown Jacket PVC Coated 250’ Solid 18/5 Solid Thermostat CL2 Cable, Reel, Brown, 4 x 250 ft. Reel47140307 Brown Jacket PVC Coated 250’ Solid 18/6 Solid Thermostat CL2 Cable, Reel, Brown, 4 x 250 ft. Reel47150307 Brown Jacket PVC Coated 250’ Solid 18/7 Solid Thermostat CL2 Cable, Reel, Brown, 4 x 250 ft. Reel47160307 Brown Jacket PVC Coated 250’ Solid 18/8 Solid Thermostat CL2 Cable, Reel, Brown, 4 x 250 ft. Reel47180307 Brown Jacket PVC Coated 250’ Solid 18/10 Solid Thermostat CL2 Cable, Reel, Brown, 4 x 250 ft. Reel

Thermostat Wire

Part Number Color Jacket Length Packaging Description12160309 Gray PVC 4 x 250 ft Reel 18/6 Stranded Overall Shielded CM/CL2

Electrical MarsEMT ClampsCompression Connector

Part Number Case Qty Packaging Description85329 10 3/Card 1/2” EMT Compression Connector, 3/Card85330 5 2/Card 3/4” EMT Compression Connector, 2/Card


Installation SuppliesElectricalMarsMini-Split WireShielded Low Voltage Cable

Part Number AWG Volts Conductors Length Description84476 18 300 2 50' 18/2 Stranded BC Shielded Low Voltage Cable 50’ Roll, 300V, NEC

725/800, ETL, CMR/CL3R, for LG Mini-Splits84478 18 300 4 50' 18/4 Stranded BC Shielded Low Voltage Cable 50’ Reel, 300V, NEC

725/800, ETL, CMR/CL3R, for LG Mini-Splits

Romex WireNon-Metallic Sheathed Cable

Part Number AWG Volts Length PackageType

Description

84251 6 600 125' Coil Romex Wire, 6 AWG, 2 Conductors with Ground 125’ Coil84253 8 600 125' Coil Romex Wire, 8 AWG, 2 Conductors with Ground 125’ Coil84255 10 600 150' Roll, Boxed Romex Wire, 10 AWG, 2 Conductors with Ground, 250’ Roll, Boxed84257 12 600 150' Roll, Boxed Romex Wire, 12 AWG, 2 Conductors with Ground, 250’ Roll, Boxed84259 14 600 150' Roll, Boxed Romex Wire, 14 AWG, 2 Conductors with Ground, 250’ Roll, Boxed

Foam TapeNu-CalgonFoam-TiteInsulation Tape

Features: • Closed cell construction foam tape • Stops sweating and condensation on refrigeration or other cold lines • Insulates against heat loss • Temperature range of -150F to 1600F • Self adhesive and easy to apply • Use on all sizes of tubing, pipes, tees, valves and fittings Applications: • Keeps cold lines cold and hot lines hot • It can be overlapped or the edges can be butted • Service temperatures can be as low as -150F with a high continuous temperature of 1600F

http://www.nucalgon.com

Part Number Physical State Solubility In Water Description4219-12 Soft Solid Foam Insoluble Foam-Tite - Foam Insulation Tape, 2" x 1/8" x 30’ Roll


Installation SuppliesFurnace Twist BlocksThermo-ManufacturingThermo-LeversLever Blocks

Features: • 5,000 lbs. crushing strength • Lightweight • Water and insect resistant • Made from recycled wood composite • Won't chip, crack, split or rot • Raises furnace off floor for easier cleaning • Stops moisture and equipment rusting • Won't conduct cold

http://thermopan.com

Part Number Size Packaging Description17525 1.75" x 2" x 2.25" 25 Thermo-Levers, Lever Block, 1.75" x 2" x 2.25", 25/Box

Gas Tite Pipe & FittingsTite-FlexCSST Tube & FittingsFlashShield Corrugated Stainless Steel Tubing

Features: • Flexibility and durability allows for simple routing through complex building structures and designs • Pre-marked by the foot for easy measuring and installation • Minimum tubing wall thickness of .010 on all sizes is more robust than other brands of CSST • Annealed 304 stainless steel makes tubing more flexible than brands not heat-treated Materials: • Tubing: ASTM A240 Type 304, 321 Stainless Steel • Jacket: UV resistant • Jacket complies with requirements of ASTM E84 25/50 index for flame and smoke Applications: CSST flexible gas piping supplies natural gas or liquefied petroleum gas to appliances

http://www.titeflex.com/industrial/products/index.html

Part Number Reel Size Packaging Weight (lbs) Description0396FS8250 20” x 12-1/2” 250 Ft/Coil 49.5 1/2" FlashShield Corrugated Stainless Steel Tubing, 250 Ft/Coil 0396FS11250 24” x 25” 250 Ft/Coil 64.25 3/4" FlashShield Corrugated Stainless Steel Tubing, 250 Ft/Coil


Installation SuppliesGas Tite Pipe & FittingsTite-FlexCSST Tube & FittingsFlashShield Straight Fittings

Features: • Tool-less flare design; no special tools are required • Metal-to-metal seal, with no split rings, O-rings or gaskets • Self-guiding assembly to ensure a perfectly even flare • Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut • All components are fully reusable Material: • Fitting adapter, bushings and nut - Brass • Square Flange - Steel with zinc coating Applications: Straight Fittings connect the flexible gas tubing to gas supply, distribution manifolds or gas appliances


Part Number Packaging Weight (lbs) Description0396FSFTG124 24/Box 10.4 3/4" FlashShield Straight Fitting - 3/4" NPT, 24/Box0396FSFTG824 24/Box 7.2 1/2" FlashShield Straight Fitting - 1/2" NPT, 24/Box

FlashShield Termination FittingsFeatures: • Tool-less flare design; no special tools are required • Metal-to-metal seal, with no split rings, O-rings or gaskets • Self-guiding assembly to ensure a perfectly even flare • Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut • All components are fully reusable Material: • Fitting adapter, bushings and nut - Brass • Square Flange - Steel with zinc coating Applications: Termination Fittings create a fixed point "stub-out" on a wall or floor surface


Part Number Packaging Weight(lbs)

Description

0396FSTRM166 6/Box 5.7 1" FlashShield Term. Fitting with Square Flange - 1" NPT, 6/Box0396FSTRM812 12/Box 6.9 1/2" FlashShield Term. Fitting with Square Flange - 1/2" NPT, 12/Box0396FSTRM1116 12/Box 8.7 3/4" FlashShield Term. Fitting with Square Flange - 3/4" NPT, 12/Box

GlovesMarsCotton/Jersey Gloves

Part Number Color Case Qty Mars Pack Description79151 Brown 12 1 9 Oz. Brown Jersey Glove, Individual Pack


Installation SuppliesHeat Pump Pump-UpDiversiTechHeat Pump RisersOne Piece Heat Pump Risers

Features: • Two-piece, heavy duty plastic unit is manufactured in three heights - 3”, 6” and 12” with an optional 4”

extension • One-piece 6S model employs structural computer generated design for strength • Thick wall sections and generous reinforcement are employed in the most effective areas, yielding a

strong yet lightweight structure • The nestable design allows maximum shipping and storage density, It also can be cut to level the unit Composition: • High-pressure injection molded polypropylene – medium gray color • Butyl mastic on the top and bottom guarantees no slipping Maximum Uniform Load: • A HPR-3-2P or HPR-6-2P Heat Pump/Condenser Riser can handle a uniform load of 2000 pounds with

no failure Maximum Point Load: • A HPR-3-2P or HPR-6-2P Heat Pump/Condenser Riser can handle a point load, applied to one square

inch area in center of footpad recess on top of single HPR, of less than 560 pounds with no failure


Part Number Height Width Depth Weight (lbs) DescriptionHPR-3 3.5" 6.5" 6.5" 0.32 One Piece Heat Pump Riser - 3"HPR-6 6" 6.5" 6.5" 0.5 One Piece Heat Pump Riser - 6"

Hose ClampsDiversiTechHC5410

Part Number Height Width Depth Weight (lbs) DescriptionHC-5410 1" 3" 6.5" 0.2 Hose Clamps, 6/Pack, SAE No. 10

Lineset ClampsThermo-ManufacturingThermo Snap Clamps

Features: • Made From Recycled Products • Multi-use applications - copper, PVC, and ABS pipes • Adjustable Snap Clamp: Micro, Mini, Residential,

Commercial, Industrial

• UV protected • Maintenance Free -- use indoors or out • Eliminate vibrations and noise call backs • Easy to re-open to make an addition


a

Part Number Size Packaging Type Description41118 1-1/2" OD 500/Box Residential Thermo Snap Lineset Clamps - Universal Mounting Brackets,

Residential 1-1/2" OD


Installation SuppliesLinesetsJMFInsulated Copper Tube

Features: • 20 standard combinations of insulated suction lines that differ by line size and insulation thickness in

a standard length of 50 feet. • Suction lines are offered with straight ends or 90 degree bends on one end of the suction line.


Part Number Size Length Description61025 3/8" x 5/8" 25’ Insulated Copper Tube Line Set 3/8" x 5/8" x 25’61035 3/8" x 5/8" 35’ Insulated Copper Tube Line Set 3/8" x 5/8" x 35’61050 3/8" x 5/8" 50’ Insulated Copper Tube Line Set 3/8" x 5/8" x 50’61225 3/8" x 3/4" 25’ Insulated Copper Tube Line Set 3/8" x 3/4" x 25’61235 3/8" x 3/4" 35’ Insulated Copper Tube Line Set 3/8" x 3/4" x 35’61250 3/8" x 3/4" 50’ Insulated Copper Tube Line Set 3/8" x 3/4" x 50’61425 3/8" x 7/8" 25’ Insulated Copper Tube Line Set 3/8" x 7/8" x 25’61435 3/8" x 7/8" 35’ Insulated Copper Tube Line Set 3/8" x 7/8" x 35’61450 3/8" x 7/8" 50’ Insulated Copper Tube Line Set 3/8" x 7/8" x 50’61825 3/8" x 1-1/8" 25’ Insulated Copper Tube Line Set 3/8" x 1-1/8" x 25’61850 3/8" x 1-1/8" 50’ Insulated Copper Tube Line Set 3/8" x 1-1/8" x 50’

Mini-Split Line SetsFeatures: • 72 standard combinations of line sets that differ by liquid line size, suction line size and length with a

standard insulation thickness of 3/8". • Duct-less line sets are offered with both the liquid and suction lines insulated, flare nuts on all ends

and with straight ends.


Part Number Size Length DescriptionFLSMS14123425 1/4" x 1/2" x 3/4" 25’ Mini-Splits Line Set 1/4" x 1/2" x 3/4" x 25’FLSMS14123450 1/4" x 1/2" x 3/4" 50’ Mini-Splits Line Set 1/4" x 1/2" x 3/4" x 50’FLSMS14383425 1/4" x 3/8" x 3/4" 25’ Mini-Splits Line Set 1/4" x 3/8" x 3/4" x 25’FLSMS14383450 1/4" x 3/8" x 3/4" 50’ Mini-Splits Line Set 1/4" x 3/8" x 3/4" x 50’FLSMS14583425 1/4" x 5/8" x 3/4" 25’ Mini-Splits Line Set 1/4" x 5/8" x 3/4" x 25’FLSMS14583450 1/4" x 5/8" x 3/4" 50’ Mini-Splits Line Set 1/4" x 5/8" x 3/4" x 50’FLSMS38583425 3/8" x 5/8" x 3/4" 25’ Mini-Splits Line Set 3/8" x 5/8" x 3/4" x 25’FLSMS38583450 3/8" x 5/8" x 3/4" 50’ Mini-Splits Line Set 3/8" x 5/8" x 3/4" x 50’


Installation SuppliesMaintenance ProductsMarsSpray with Smart Straw

Part Number Case Qty Mars Pack Description79036 12 12 8 Oz. Spray Smart with Straw

Mini-Split AccessoriesDiversiTechSpeediChannelFeatures: • Single person installation • Can be easily customized to any wall construction • The original natural color blends well with almost any wall construction aesthetic • The flat bottom channel sits on surfaces easier and fits into corners better. • It can be silicone sealed against the wall • Stainless steel screws will not rust • Long radius 90º bend allows for a larger bending radius for the line set, making installation easier Specifications: Color - Natural Material - Weather Resistant PVC, UV Stabilized and Fire Resistant Fire Rating - Meets UL 94V.-0 Temperature Range - -4°F TO 140°F Weather Resistance - Tested to over 2,000 hours Fixing Screws - Stainless Steel


45º Flat BendPart Number Height Width Depth Weight (lbs) Description230-FB453 6" 3" 1.5" 0.2 3" 45° Flat Bend, SpeediChannel System

90º Flat BendPart Number Height Width Depth Weight (lbs) Description230-FB3 1.25" 6" 4" 0.2 3" 90° Flat Bend, SpeediChannel System

90º Inside ElbowPart Number Height Width Depth Weight (lbs) Description230-EB3 1.25" 4" 4" 0.2 3" 90° Inside Elbow, SpeediChannel System


Installation SuppliesMini-Split AccessoriesDiversiTechSpeediChannel90º Outside Elbow

Part Number Height Width Depth Weight (lbs) Description230-EIN3 3.5" 3.5" 1.5" 0.2 3" 90° Outside Elbow, SpeediChannel

System

CapPart Number Height Width Depth Weight (lbs) Description230-DC3 0.25" 2.5" 2.75" 0.2 3" Cap, SpeediChannel System

Duct EndPart Number Height Width Depth Weight (lbs) Description230-DE3 2" 3.25" 4.25" 0.2 3" Duct End, SpeediChannel System

Flex JointPart Number Height Width Depth Weight (lbs) Description230-FJ3 2.5" 2.75" 20" 0.2 3" Flex Joint, SpeediChannel System

Line Set Cover SystemPart Number Height Width Depth Weight (lbs) Description230-D3 1.75" 2.75" 79" 3.8 3" SpeediChannel Line Set Cover System

Union CouplingPart Number Height Width Depth Weight (lbs) Description230-CP3 0.25" 2.5" 3" 0.2 3" Union Coupling, SpeediChannel System

Wall PenetrationPart Number Height Width Depth Weight (lbs) Description230-WC3 3.5" 5.5" 7.5" 0.4 3" Wall Penetration Cover, SpeediChannel

System


Installation SuppliesPackaged Nylon Fittings BramecAdapterFeatures: • For vinyl, supertube & other plastic tubings • Attractive skin display packaging http://www.bramec.com

Barb x FPTPart Number Connection Packaging Description0648 1/2 Barb x 3/4 FPT 4/Pk Swivel Adapter, 1/2 Barb x 3/4 FPT (4/Pk)

Barb x MPTPart Number Connection Packaging Description0633 1/2 Barb x 3/4 MPT 4/Pk Adapter, 1/2 Barb x 3/4 MPT (4/Pk)

ElbowFeatures: • For vinyl, supertube & other plastic tubings • Attractive skin display packaging http://www.bramec.com

BarbPart Number Connection Packaging Description0629 1/2 Barb 4/Pk Elbow, 1/2 Barb (4/Pk)0630 5/8 Barb 4/Pk Elbow, 5/8 Barb (4/Pk)

Barb x FPTPart Number Connection Packaging Description0621 1/2 Barb x 3/4 FPT 4/Pk Elbow, 1/2 Barb x 3/4 FPT (4/Pk)

Barb x MPTPart Number Connection Packaging Description0625 5/8 Barb x 3/4 MPT 4/Pk Elbow, 5/8 Barb x 3/4 MPT (4/Pk)0632 1/2 Barb x 3/4 MPT 4/Pk Elbow, 1/2 Barb x 3/4 MPT (4/Pk)


Installation SuppliesPackaged Nylon Fittings BramecHose Mender

Features: • For vinyl, supertube & other plastic tubings • Attractive skin display packaging


Part Number Connection Packaging Description0610 3/8 Barb 5/Pk Hose Mender, 3/8 Barb (5/Pk)0611 1/2 Barb 4/Pk Hose Mender, 1/2 Barb (4/Pk)0612 5/8 Barb 4/Pk Hose Mender, 5/8 Barb (4/Pk)

TeeBarb x Barb x Barb

Features: • For vinyl, supertube & other plastic tubings • Attractive skin display packaging


Part Number Connection Packaging Description0600 1/2 Barb 4/Pk Tee, 1/2 Barb (4/Pk)0601 5/8 Barb 4/Pk Tee, 5/8 Barb (4/Pk)0622 1/2 Barb x 3/4 Barb x 1/2 Barb 2/Pk Tee, 1/2 Barb x 3/4 Barb x 1/2 Barb (2/Pk)

Pressure RegulatorsMaxitrol325 Series Appliance Pressure Regulators

Features: • 325 Series pounds to inches regulators are for use on residential, commercial, and industrial applications • The 325 Series features a high leverage valve linkage assembly to deliver positive dead-end lock-up • The regulators are capable of precise regulating control from full flow down to pilot flow • Imblue Technology Gases: • Suitable for natural, manufactured, mixed gases, liquefied petroleum gases, and LP gas-air mixtures Approvals: • CSA: ANSI Z21.18/CSA 6.3

http://www.maxitrol.com/Regulators/straightthru.asp

Part Number Capacity MaximumIndividual Load

Type Vent PipeConnections

Description

325-3 150,000 Btu/hr 100,000 Btu/hr Appliance 1/8” NPT 325 Series Appliance Pressure Regulators, 1/2" 325-5 300,000 Btu/hr 250,000 Btu/hr Appliance 3/8” NPT 325 Series Appliance Pressure Regulators, 3/4"


Installation SuppliesPressure RegulatorsMaxitrol325 Series Appliance Pressure Regulators

Maximum Inlet Pressure:

Model CSA Certified Maxitrol Tested 325-3

325-5A 2 psi (13.8 kPa), 5 psi (34.5 kPa)

10 psi (69 kPa)

Model With 12A09, 12A39, or 12A49 InstalledMaximum Inlet Pressure

325-3 325-5A

NAT: 5 psi (34.5 kPa) LP: 2 psi (13.8 kPa)

Outlet Pressure Range (CSA Certified):

Model Inlet Pressure Spring Ranges 325-3 2 psi (13.8 kPa) 5-9” w.c.7-11” w.c.

325-3325-5A 5 psi (34.5 kPa) 6-10” w.c.7-11” w.c.

Pressure Drop - 0.64 sp. gr. gas expressed in CFH (m3/h) (for system pressure drop calculations)

Pressure Drop Model 7.0” w.c(1.7 kPa) 1/2 psi (3.4 kPa) 3/4 psi(5 kPa) 1 psi(7 kPa)

325-3 145 (4.0) 204 (5.8) 250 (7.0) 289 (8.2) 325-5A 338 (9.6) 476 (13.5) 583 (16.5) 673 (19.1)

Capacities - Based on 1” w.c. pressure droop from set point**. 0.64 sp gr gas expressed in CFH (m3/h)

Operating Inlet Pressure Model Number (pipe size)

Outlet Pressure Set Point

CSA Maximum 1/2 psi

(3.4 kPa) 3/4 psi (5 kPa)

1 psi (7 kPa)

2 psi (13.8 kPa)

5 psi (34.5 kPa)

10 psi (69 kPa)

4.0” w.c.(1.0 kPa) 150(4.2) 160(4.5) 190(5.4) 220(6.2) 220(6.2) 300(8.5) 320(9.1) 7.0” w.c.(1.7 kPa) 150(4.2) 120(3.4) 150(4.2) 180(5.1) 220(6.2) 290(8.2) 320(9.1)

325-3 (3/8”, 1/2”)

10.0” w.c.(2.5 kPa) 150(4.2) 100(2.8) 120(3.4) 150(4.2) 220(6.2) 280(7.9) 320(9.1) 4.0” w.c.(1.0 kPa) 300(8.5) 300(8.5) 340(9.6) 416(11.8) 500(14.2) 600(17.0) 680(19.3)7.0” w.c.(1.7 kPa) 300(8.5) 245(6.9) 315(8.9) 340(9.6) 480(13.6) 600(17.0) 680(19.3)

325-5A (1/2”, 3/4”, 1”)

10.0” w.c.(2.5 kPa) 300(8.5) 225(6.4) 270(7.6) 312(8.8) 430(12.2) 560(15.9) 680(19.3)

Dimensions

Dimensions - Expressed in inches (mm) Dimensions Model Number Pipe

Size*Swing Radius A B C

325-3(B) 1/2” 3 (76) 3-1/2 (89) 4-1/4 (108) 3-7/8 (98) 325-5A(B) 3/4” 4-7/8 (124) 5-1/4(133) 5-7/8 (149) 5-7/16 (138)

*Standard models NPT threads

Spring Selection Chart - Inches w.c (kPa) unless noted

CSA Certified Model Number

2 psi (13.8 kPa) 5 psi (34.5 kPa)

Standard Spring

Other Springs Available

325-3(B) 5 to 9

(1.25 to 2.25) 7 to 11

(1.7 to 2.7) 6 to 10

(1.5 to 2.5)7 to 11

(1.7 to 2.7)4 to 12

(1.0 to 3.0)2 to 6

(0.5 to 1.5)10 to 22

(2.5 to 5.5) 15 to 30

(3.7 to 1.5)1 to 2 psi

(6.9 to 13.9)

325-5A(B) 5 to 9

(1.25 to 2.25) 7 to 11

(1.7 to 2.7) 6 to 10

(1.5 to 2.5)7 to 11

(1.7 to 2.7)4 to 12

(1.0 to 3.0)2 to 6

(0.5 to 1.5)10 to 22

(2.5 to 5.5) 15 to 30

(3.7 to 1.5)1 to 2 psi

(6.9 to 13.9)


Installation SuppliesPressure RegulatorsMaxitrolGas Pressure Regulator

Part Number DescriptionMaxi Cap 3R Rubber Weather Cover Fits Maxitrol 325-3 Series Regulator 1/2"Maxi Cap 5R Rubber Weather Cover Fits Maxitrol 325-5 Series Regulator 3/4"

RA BoxMcDaniel MetalsLabor SaverFor Gas Furnace & Electric Air Handlers

Features: • Available in 1-3 ton or 3.5-5 ton sizes • Adjustable rack for 1”, 2” and 4” filters • Uses standard filter sizes • Easy, dual-sized access • Lined with 1” insulation • Embossed, heavy gauge steel construction • Hardware-free filter access • Elevated boxes • Angled filter maximizes surface area • Raises furnace to plenum for efficient installation

http://www.mcdanielmetals.com/filterbase/default.aspx

Part Number DescriptionLS2232 Labor Saver for Gas Furnaces & Electric Air Handlers, 28-1/2 x 32 x 26-1/2LS2240 Labor Saver for Gas Furnaces & Electric Air Handlers, 28-1/2 x 40 x 26-1/2LS2832 Labor Saver for Gas Furnaces & Electric Air Handlers, 22-1/2 x 32 x 20-1/2LS2840 Labor Saver for Gas Furnaces & Electric Air Handlers, 22-1/2 x 40 x 20-1/2LS2843 Labor Saver for Gas Furnaces & Electric Air Handlers, 28-1/2 x 43 x 26-1/2

Dimensions: MODEL A B C D E F G H Filter LS 2832 28-1/2 32 26-1/2 131/2 24 8 61/2 3 20 x 25LS 2840 28-1/2 40 26-1/2 19 24 10 7 3 24 x 24LS 2843 28-1/2 43 26-1/2 19 24 12 7 3 24 x 24LS 2232 22-1/2 32 20-1/2 14-1/2 20-1/2 9-1/2 5 2 20 x 20LS 2240 22-1/2 40 20-1/2 20 20-1/2 12 5 2 20 x 25


Installation SuppliesRA BoxSnapRiteFurnace Box

Features: • 26 gauge galvanized steel Fits most furnace sizes • Raises low profile furnace from ground, Easy access to filter for service

Part Number Filter Size Height Width Depth DescriptionFB1428 14" x 25" 18-1/2" 14-3/4" 28-1/2" Furnace Box with Filter Rack 14-3/4" x 28-1/2" x 18-1/2"FB1728 16" x 25" 18-1/2" 17-3/2" 28-1/2" Furnace Box with Filter Rack 17-3/2" x 28-1/2" x 18-1/2"FB2128 20" x 25" 18-1/2" 21-3/4" 28-1/2" Furnace Box with Filter Rack 21-3/4" x 28-1/2" x 18-1/2"FB2428 20" x 25" 18-1/2" 24-3/4" 28-1/2" Furnace Box with Filter Rack 24-3/4" x 28-1/2" x 18-1/2"

SouthwarkReturn Air Support Boxes

Part Number Size Return Air Duct Size Description189SB/R/RD 30" x 28" 8" x 24" Return Air Support Box 30" x 28"

SB38

Dimension

Part Number Duct Size A B DescriptionSB38 10" x 25" 38” 26” Return Air/Support Box, 10" x 25"

Return Air PanningThermo-ManufacturingThermo-Headers

Features: • Thermo-Headers are made from Thermo-Pan • These headers are the answer to capping off the return air run • Precision die cut and scored for easy installation, Pre-cut and Sorted to fit easily between joists • Specially-sized headers are cut and scored to fit I-joist construction


Part Number Size Packaging Description16017 16" x 17" 250 I-Joist Header, 16" x 17", 250/Box


Installation SuppliesReturn Air PanningThermo-ManufacturingThermo-Pan

Features: • Consists of corrugated insulation faced with aluminum • Significantly reduces duct noises and labor • No shop fabrication, user friendly - no cut hands • No 'oil canning' or duct noise • Air space provides positive R-value • Stapling as directed results in plenum air seal tighter • Environment-friendly • Made from recycled products • Moisture treated against dampness • Pre-formed headers (regular joists and I-joists) • Will not sustain combustion • Patented in USA and Canada


Part Number Size Packaging Description16048 16" x 47.5" 25 Thermo-Pan, 16" x 47.5", 25/Box19048 19.5" x 47.5" 25 Thermo-Pan, 19.5" x 47.5", 25/Box32036 32" x 35.5" 25 Thermo-Pan, 32" x 35.5", 25/Box

Return FramesThermo-ManufacturingThermo-Connectors - Return Air Grille Dry Wall FramesStandard Frames

Features: • Precision Molded Polypropylene • No Product loss on truck or job site • Safety Edged, All sides and ends • Double frames cut for use as a single • 10 pc/pkg for the contractor • Place grill over frames and screw into precision molded frame holes on finished drywall

\


Part Number Size Style Packaging Description14630 30" x 6" or 14 x 6" (2) Standard 50 Thermo-Connectors, Standard Frame, 30" x 6" or 14 x 6" (2), 50/Box


Installation SuppliesScrewsMalcoBit-Tip

Features: • By drilling its own hole, Bit-Tip produces the optimum hole size, resulting in better thread engagement and a

tighter fit, One operation fastening also means no alignment problems • Point length will determine metal thickness that can be drilled, tapped and fastened • Also, plywood, soft wood, composition board, drywall, insulation and laminates may be fastened to metal

framing or components, Made from strong, high quality, specially heat treated steel • Bit-Tip Self Drilling and Tapping Screws are precision cold forged insuring uniformity of dimension and drill

point contours • The versatile Bit-Tip Screw is an excellent replacement for fastening operations now using rivets, nuts and

bolts, spot welds or adhesives • Bit-Tip also eliminates the need for costly auxiliary fastening equipment such as drill bits, taps and welding

equipment • Requires only a standard screw gun power tool rated at 2500 RPM equipped with drilling depth locator • Trademarked & Patented Head Markings indicate one and only genuine Bit-Tips. U.S. Patent No. D524,638


SizePart Number Driver Screw Head Type Packaging Description51244 1/4" 8-18" x 1/2" HW 500 BT131T 8-18" x 1/2" Bit Tip, HW, 1/4" Driver Size, 500/PK51245 1/4" 8-18" x 1/2" HW 100 BT131 8-18" x 1/2" Bit Tip, HW, 1/4" Driver Size, 100/PK51250 1/4" 8-18" x 3/4" HW 500 BT133T 8-18" x 3/4" Bit Tip, HW, 1/4" Driver Size, 500/PK51251 1/4" 8-18" x 3/4" HW 100 BT133X 8-18 x 3/4" Bit Tip, HW, 1/4" Driver Size, 100/PK51280 5/16" 10-16" x 1/2" HW 500 BT141T 10-16" x 1/2" Bit Tip, HW, 5/16 Driver Size, 500/PK51285 5/16" 10-16" x 3/4" HW 7000 BT143 10-16" x 3/4" Bit Tip, HW, 5/16 Driver Size, 7000/PK51286 5/16" 10-16" x 3/4" HW 500 BT143T 10-16" x 3/4" Bit Tip, HW, 5/16 Driver Size, 500/PK51287 5/16" 10-16" x 3/4" HW 100 BT143X 10-16" x 3/4" Bit Tip, HW, 5/16 Driver Size, 100/PK51289 5/16" 10-16" x 1" HW 500 BT144T 10-16" x 1" Bit Tip, HW, 5/16 Driver Size, 500/PK

Bit-Tip ScrewsBT133X

Features: • By drilling its own hole, Bit-Tip® produces the optimum hole size, resulting in better thread engagement and a

tighter fit. • Point length will determine metal thickness that can be drilled, tapped and fastened. Also, plywood, soft wood,

composition board, drywall, insulation and laminates may be fastened to metal framing or components. • Made from strong, high quality, especially heat treated steel. Bit-Tip® Self Drilling and Tapping Screws are

precision cold forged insuring uniformity of dimension and drill point contours. • The versatile Bit-Tip® Screw is an excellent replacement for fastening operations now using rivets, nuts and

bolts, spot welds or adhesives • Bit-Tip® also eliminates the need for costly auxiliary fastening equipment such as drill bits, taps and welding

equipment. • Requires only a standard screw gun power tool rated at 2500 RPM equipped with drilling depth locator


Part Number Driver Size Screw Length Head Type Material Thickness Description51256 1/4" 8-18" x 3/4" HW .035-.100 Bit-Tip Screw 8-18" x 3/4"


Installation SuppliesScrewsMalcoZip-In

Features: • Undercut-indented hex washer slotted head • Bright zinc plated • Burr Fee • Full 1/4" (no 8) head will not strip out of hex driver opening • One 1/4" hex driver accommodates all sizes • Undercut - always seats flush • Some screws sizes available in pails. • Trademarked & Patented Head Markings indicate one and only genuine Zip-ins. U.S. Patent No. D524,638


Head Part Number Screw

Size Color Size Packaging Description

51075 6" x 3/8" Zinc Plated 1/4" 1000 HW6X3/8ZT 6" x 3/8" Zip-In Screw, 1/4" Head Size, Packaging - 100051078 7" x 1/2" Zinc Plated 1/4" 15000 HW7X1/2 7" x 1/2" Zip-In Screw, 1/4" Head Size, Packaging - 1500051079 7" x 1/2" Zinc Plated 1/4" 1000 HW7X1/2ZT 7" x 1/2" Zip-In Screw, 1/4" Head Size, Packaging - 100051080 7" x 1/2" Zinc Plated 1/4" 100 HW7X1/2 7" x 1/2" Zip-In Screw, 1/4" Head Size, Packaging - 10051082 8" x 1/2" Zinc Plated 1/4" 12000 HW8X1/2 8" x 1/2" Zip-In Screw, 1/4" Head Size, Packaging - 1200051083 8" x 1/2" Zinc Plated 1/4" 1000 HW8X1/2ZT 8" x 1/2" Zip-In Screw, 1/4" Head Size, Packaging - 100051084 8" x 1/2" Zinc Plated 1/4" 100 HW8X1/2ZX 8" x 1/2" Zip-In Screw, 1/4" Head Size, Packaging - 10051086 8" x 3/4" Zinc Plated 1/4" 10000 HW8X3/4Z 8" x 3/4" Zip-In Screw, 1/4" Head Size, Packaging - 1000051087 8" x 3/4" Zinc Plated 1/4" 1000 HW8X3/4ZT 8" x 3/4" Zip-In Screw, 1/4" Head Size, Packaging - 100051088 8" x 3/4" Zinc Plated 1/4" 100 HW8X3/4ZX 8" x 3/4" Zip-In Screw, 1/4" Head Size, Packaging - 10051090 8" x 1" Zinc Plated 1/4" 7000 HW8X1Z 8" x 1" Zip-In Screw, 1/4" Head Size, Packaging - 700051091 8" x 1" Zinc Plated 1/4" 500 HW8X1ZTZ 8" x 1" Zip-In Screw, 1/4" Head Size, Packaging - 50051092 8" x 1" Zinc Plated 1/4" 100 HW8X1Z 8" x 1" Zip-In Screw, 1/4" Head Size, Packaging - 10051095 8" x 1-1/2" Zinc Plated 1/4" 250 HW8X11/2ZT 8" x 1-1/2" Zip-In Screw, 1/4" Head Size, Packaging - 25051096 8" x 1-1/2" Zinc Plated 1/4" 50 HW8X11/2ZX 8" x 1-1/2" Zip-In Screw, 1/4" Head Size, Packaging - 5051098 8" x 2" Zinc Plated 1/4" 2300 HW8X2Z 8" x 2" Zip-In Screw, 1/4" Head Size, Packaging - 230051099 8" x 2" Zinc Plated 1/4" 250 HW8X2ZT 8" x 2" Zip-In Screw, 1/4" Head Size, Packaging - 250

White HeadFeatures: • For use securing register to wall • Head on screw is painted white to match grill • Phillips oval head • Zip-In quality assurances quick drilling • Long length to screw to wall stud


Head Part Number Screw Size Color Size Type Packaging Description51145 8" x 1-1/2" White 1/4” Hex

SlottedHW 250 HW8X1-1/2ZWT 8" x 1-1/2" Zip-In Screw, White, 1/4” Hex

Slotted, Packaging - 250


Installation SuppliesScrewsMalcoZip-In - RegisterHW8X2ZWT

Features: • Single starting thread machined down to very tip of screw point • Instantly penetrates and engages in heavy gauge sheet metal and layered light gauge • Undercut-indented hex washer slotted head, White Painted., Burr Fee • Full 1/4" (no 8) head will not strip out of hex driver opening • One 1/4" hex driver accommodates all sizes • Undercut - always seats flush, Quality controlled heat treat • Sharp tapered point will not mushroom or break


Part Number Head Size Screw Length Description51102 1/4" 2" 1/4" Slotted Oval Head Zip-In Register Screw 2"

PO8X2ZWTFeatures: • White Painted Register Screws • Zip-in are self-piercing screws.


Part Number Head Size Screw Length Description51148 #2 Phillips 2" #2 Phillips Oval Head White Zip-In Register Screw 2"

Secondary Drain PanDiversiTechCondensate Drain PansA/C Secondary Condensate Drain Pains

Features: • DiversiTech’s A/C Secondary Plastic Condensate Drain Pan is vacuum-formed from general-purpose

Acrylonitrile Butadiene Styrene (ABS) plastic • All of these drain pans will contain a depth of 2 inches (50.8mm) of water, and are equipped with a 3/4-inch

diameter (19.0mm) Polyvinyl Chloride (PVC) discharge fitting Applications: • Secondary drain pans are used to collect condensate from cooling and evaporator coils in locations where

damage to any building component could occur as a result of overflow from the equipment drain pan or stoppage of the condensate drain piping


Part Number OverallDimension

Height Width Depth Weight (lbs) Description

6-2763L 29" x 65" 2.5" 28.75" 64.25" 12.5 A/C Secondary Condensate Drain Pain, OutletLong Side, Overall Dimension - 29" x 65"

6-3263L 34" x 65" 2.5" 31.5" 61.5" 5 A/C Secondary Condensate Drain Pain, OutletLong Side, Overall Dimension - 34" x 65"


Installation SuppliesSolder and FluxJW HarrisFluxesStay-Clean Soldering Flux

Features: • Designed primarily for copper to copper and copper to brass connections, the paste form is ideal for

soldering tube joints • Stay Clean Paste flux works well with most leaded and lead-free solder compositions • Flux residue should be removed after soldering • Meets Commercial Spec. AA-51145C, Form A Typical Applications: • Superior flux for most metals, copper, brass, bronze, steel, galvanized, Monel • Not recommended for aluminum, magnesium, or titanium • Not recommended for electrical or electronic applications

http://www.harrisproductsgroup.com

Part Number Size Color Odor Physical State Description40027 4 Oz. Jar Tan/Gold Gel Odorless Paste Stay-Clean Paste Soldering Flux, 4 Oz Jar

Stay-Silv White FluxFeatures: • An all-purpose, low-temperature flux for use in silver brazing • Use with most ferrous and non ferrous metals • Meets Fed Spec. OF499, Type B;AWS FB3A, AMS 3410 Typical Applications: • Use Stay-Silv White Brazing Flux on applications requiring normal heat • For use with silver brazing alloys on all metals other than aluminum, magnesium, or titanium


Part Number Size Color Odor Physical State Description40022 6.5 Oz (184 g) Bottle White Odorless Paste Stay-Silv White Brazing Flux, 6.5 Oz Bottle

SolderStay-Brite Silver Solders

Features: • Stay-Brite solders bond with all of the ferrous and nonferrous alloys • Joints soldered with Stay-Brite solders exhibit considerably higher than necessary elongation for sound,

dissimilar metal joints and vibration applications • Both Stay-Brite and Stay-Brite 8 produce an overall component with greater strength than a brazed

component whose base metals are weakened by annealment from high brazing heat


Part Number Size Color Odor Description10001 1/8 x 1# Spool Gray to Silver Odorless Stay-Brite 1/8 x 1# Spool, 4% Ag 96% Sn10009 1/16 x 1# Spool Gray to Silver Odorless Stay-Brite #8 1/8 x 1# Spool, Stay-Brite #8 1/8 x 1# Spool


Installation SuppliesSolder and FluxJW HarrisSolderStay-Silv Brazing Alloys - DynaFlow

Features: • Dynaflow melts and flows at temperatures very close to Stay Silv 15, and provides comparable brazed

mechanical properties • This makes Dynaflow an excellent cost effective alternative to the 15% silver alloys • This premium, medium range silver alloy has been meticulously formulated to even tighter specifications than

standard copper-to-copper alloys


Part Number Size Odor Boiling Point Description66000 1 Lbs (.050" x 1/8" - 28 Stick)

TubeOdorless 2595°C DynaFlow .050" x 1/8" - 28 Stick Tube, 6% Ag 87.9% Cu,

6.1% P

Stay-Silv Brazing Alloys - Harris 0Features: • Suitable for most copper-to-copper or brass joints where close tolerance can be maintained


Part Number Size Odor Boiling Point Description21035 .050" x 1/8" - 28 Stick Tube Odorless 2595°C Harris 0 .050" x 1/8" - 28 Stick Tube, 92.9% Cu 7.1% P

Stay-Silv Brazing Alloys - Stay-Silv 15Features: • The 15% silver alloy has proven its value • This filler metal is excellent for situations in which close fit-up does not exist, and where thermal expansion

and service vibration are involved


Part Number Size Odor Boiling Point Description61035 .050" x 1/8" - 28 Stick Tube Odorless 2595°C Stay-Silv 15 .050" x 1/8" - 28 Stick Tube, 15% Ag 80% Cu 5% P

TapesDiversiTechElectrical TapeSuper 33+ Electrical Tape

Features: • Premium quality, 7 mil electrical insulating tape that applies well in broad temperature range. • Flame-retardant, hot- and cold-weather resistant; resists UV rays, abrasion, moisture, alkalies, acids and

corrosion.


Part Number Height Width Depth Weight (lbs) DescriptionET33 0.9" 3.5" 3.5" 0.23 Super 33+ Electrical Tape – 3/4" x 66’


Installation SuppliesTapesDiversiTechLine Set Tape

Features: • OPP Backing, Acrylic Adhesive • Low VOC Content • Tough and durable. • Hand tearable for ease of use. • Solvent-Free for reduced odor.

• UV Resistant for outdoor installations. • Mold and moisture resistant. • Can contribute toward satisfying EQ Credit 4.1 • (Low Emitting Materials) under LEED®. • Aggressive bond - won't flag or lift.


Part Number Standard Sizes Color Backing Adhesive Description444 48mm x 55M Black Printed or

UnprintedOPP Film Acrylic Line Set Tape, OPP Film - Black Printed or Unprinted

PolykenDuct TapePolyken 243

Features: • PE Coated Cloth Backing, Natural rubber based adhesive • Low VOC Content, Conforms well to irregular surfaces, Resists twisting & curling • High adhesion & holding power for both rough and smooth surfaces • Can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED • Tested in accordance with UL 723 • Physical State: Rubber based pressure sensitive adhesive coated on one side of polymer/cloth backing Applications: • General repair, General purpose construction uses • Bundling, patching, and mending, Seaming & hanging polyethylene sheeting • Emergency tape for automotive applications

http://tapes.berryplastics.com/Brands.aspx?ID=11

Part Number Length Width Color Adhesive Description2432B 60 Yds 2" Black Rubber 2" x 60Yd, Silver Multi-Purpose Duct Tape - Versatile Performance2432S 60 Yds 2" Silver Rubber 2" x 60Yd, Black Multi-Purpose Duct Tape - Versatile Performance

Physical Properties: Measurement Standard UOM Metric UOM Test Method Adhesion to Backing 43oz/in 48.16g/mm PSTC-1 Total Thickness 10 mils 225.4 mic ASTM D-1000 Adhesion to Steel 46 oz/in 5.03 N/cm PSTC-101 Tensile Strength 23 lb/in 40.28 N/cm ASTM D-1000 Operating Temperature 40 to 200 °F 4 to 93 °C VOC Content <1 g/L


Installation SuppliesTapesPolykenFoil TapePolyken 337

Features: • 2.0 mil Aluminum Foil Backing, Synthetic Rubber Adhesive • Low VOC Content, Conformable to fit corners and joints • UV, moisture and mold resistant, Non-solvent for less odor and low VOC content • Extreme high tack, aggressive bond to surfaces, Good all-weather performance • Meets flammability requirements for use in construction and marine applications • Tested in accordance with UL723 • LEED - Contributes toward satisfying EA Credit 1 (Optimize Energy Performance) • Can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED • Physical State: Backing composed of aluminum skin with the texture coated with a pressure sensitive

adhesive and lined with release paper Applications: • Taping joints and seams in duct work for A/C, heating, and ventilation systems • General purpose industrial and automotive uses • Insulation seaming and patching


Part Number Length Width Color Adhesive Packaging Description651411B 50 Yds 2" Aluminum Synthetic Rubber Standard 2" x 50Yd, Premium Silver Foil Duct Tape3373 50 Yds 3" Aluminum Synthetic Rubber Standard 3" x 50Yd, Premium Silver Foil Duct Tape

Physical Properties: Measurement Standard UOM Metric UOM Test Method Adhesion to Backing 90oz/in 100.8g/mm PSTC-101B Total Thickness 3.7 mils 93.98 mic ASTM D-1000 Foil Thickness 1.8 mils 45.72 mic ASTM D-1000 Adhesion to Steel 100 oz/in 10.95 N/cm PSTC-101 Tensile Strength 14 lb/in 24.52 N/cm ASTM D-1000 Operating Temperature 40 to 200 °F 4 to 93 °C Smoke Developed 10 Flame Spread 10 VOC Content <1 g/L


Installation SuppliesTapesPolykenFoil TapePolyken 339

Features: • Aggressive cold weather acrylic adhesive • New unbleached kraft release liner • Low VOC Content • Superior performance in all climate conditions • Mold & Mildew Resistant • UL181A & UL181B-FX Listed • Meets code requirements and can contribute toward requirements for EA Credit 1 (Optimize Energy

Performance) under LEED • Can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED Applications: • Permanently seals seams in fiberglass duct board and flexible ducts for HVAC systems • Suitable for use on rigid sheet metal ducts • Durable seal for dryer ventilation


Part Number Length Width Color Adhesive Packaging Description3393 50 Yds 3" Aluminum Cold weather Acrylic SP/L 3" x 50Yd, Cold Weather Premium Foil Tape,

UL181A-P & B-FX Listed Physical Properties:

Test Typical Value Typical Value (Metric) Test Method Total Thickness 4.8 mils 121.92 µ ASTM D-1000 Adhesion to Steel 68 oz./in. N/cm7.44 PSTC-1 Adhesion to Backing 60 oz./in. N/cm6.57 PSTC-1 Tensile Strength 23 lb./in. N/cm40.28 ASTM D-1000 Probe Tack 700 oz./in. N/cm1225.89 Operating Temperature Range -20F To 325F -29C To 163C Installation Temperature Range -10F to 200F -24C To 93C Flame Spread 3 UL 723 Smoke Developed 0 UL 723 VOC Content <30 g/l


Installation SuppliesTapesPolykenFoil TapePremium UL181A& B-FX Foil Tape

Features: • New unbleached kraft release liner • Aggressive cold weather acrylic adhesive • UL181A & B-FX Listed • Low VOC Content • Reduced environmental impact • Superior performance in all climate conditions

• Mold & Mildew Resistant • Meets code requirements and can contribute • toward requirements for EA Credit 1 (Optimize • Energy Performance) under LEED • Can contribute toward satisfying EQ Credit 4.1 • (Low Emitting Materials) under LEED


Part Number Standard Sizes Color Adhesive DescriptionUL181A& B-FX 2.5" x 60Yd, 72mm

x 55mAluminum Cold weather

AcrylicPremium UL181A& B-FX Foil Tape, Printed 2 mil Foil, Aluminum

FSK TapePolyken 338

Features: • Foil/Scrim/Kraft Laminate Backing • Synthetic Rubber Adhesive • Low VOC Content • High strength & tear resistant • UV, moisture and mold resistant • Non-solvent for less odor and low VOC content • Super high tack, aggressive bond to surfaces • Tested in accordance with UL723 • LEED - Contributes toward satisfying EA Credit 1 (Optimize Energy Performance) • Can contribute toward satisfying EQ Credit 4.1 (Low Emitting Materials) under LEED • Physical State: Backing composed of aluminum skin with the texture coated with a pressure sensitive

adhesive and lined with release paper Applications: • Vapor barrier seal for insulation facing • Sealing insulation and repairing in cooler/refrigeration applications


Part Number Length Width Color Adhesive Packaging Description3383 50 Yds 3" Aluminum Synthetic Rubber SP/L 3" x 50Yd, Diamond pattern Foil/Scrim/Kraft Paper

Laminate Insulation Jacketing Tape, Tear Resistant Physical Properties:

Measurement Standard UOM Metric UOM Test Method Adhesion to Backing 40oz/in 44.8g/mm PSTC-1 Total Thickness 8.0 mils 203.2 mic ASTM D-1000 Adhesion to Steel 70 oz/in 7.66 N/cm PSTC-101 Tensile Strength 35 lb/in 61.29 N/cm ASTM D-1000 Operating Temperature 40 to 200 °F 4 to 93 °C Smoke Developed 15 Flame Spread 15 VOC Content <1 g/L


Installation SuppliesThum GumDiversiTechDiversiGum Sealing Compound

Part Number Description6-202-2 DiversiGum Sealing Compound – 2 Ib. Slug

Vibration IsolationDiversiTechAnti-Vibration PadsE.V.A. Anti-Vibration Pad

Features: • The EVA anti-vibration pad is designed to eliminate vibrations emanating from motor driven appliances such

as compressors used in air-conditioning and refrigeration units • This product consists of a polymetric foam core laminated with two ribbed rubber sheets • These sheets are laminated in such a way that the ribs are ninety degrees opposed to one-another • This opposition provides a natural resistance to creep or “walking” normally associated with vibrations Product Construction/Material Specifications: • Rubber - Used as the anti-skid surface on the top and bottom of the pad. This rubber is a styrene butadiene

rubber with aggressive tensile strength, and elongation characteristics suitable for the application • EVA - Used as the core vibration dampening material. This EVA material is a polymetric foam material. It is

constructed of a proprietary blend of ethyl vinyl acetate and other suitable enhancements • Weight - 1.34 oz./in2


Part Number Height Width Depth Weight (lbs) DescriptionMP-2E 0.98" 2.01" 2.05" 0.08 E.V.A. Anti-Vibration Pad, 2" x 2" x 7/8"MP-3E 1" 3" 3" 0.2 E.V.A. Anti-Vibration Pad, 3" x 3" x 7/8"MP-18E 1" 18" 18" 7.2 E.V.A. Anti-Vibration Pad, 18" x 18" x 7/8"

Wet SwitchDiversiTechWet Switch Flood Detector

Features: • Water activated switch • Hydrophilic pad • Integral feet • Stainless steel sensor array • Solid state electronics • Epoxy encapsulated electronics • Double throw relay • Standard 24VAC control • Multiple unit connectivity


Part Number Height (in) Width (in) Depth (in) Weight (lbs) DescriptionWS-1 1.5" 4.1" 7.5" 0.1375 Wet Switch Flood Detector


Installation SuppliesWire TiesMarsDuct Straps

Features: • MARS nylon wire ties and duct straps are avaliable in a wide variety of styles, color and tensile strengths • They range in sizes from 4” to 36” with tensile strengths from 18 lbs. to 175 lbs. • All MARS wire ties and duct straps feature the bent tip design for ease and insertion


Part Number Size Color Mars Pack Packaging Description86127 24" Natural 1 50 24” Duct Strap for up to 6” Duct, Natural86128 36" Natural 1 50 36” Duct Strap for up to 10” Duct, Natural86129 48" Natural 1 50 48” Duct Strap for up to 14” Duct, Natural

Wire TiesFeatures: • MARS nylon wire ties and duct straps are avaliable in a wide variety of styles, color and tensile strengths • They range in sizes from 4” to 36” with tensile strengths from 18 lbs. to 175 lbs. • All MARS wire ties and duct straps feature the bent tip design for ease and insertion


Part Number Size Color Diameter Mars Pack Packaging Description86115 7.5" Black 1-3/4” 1 100 7.5” Wire Tie, Black, Screw Mount, 1-3/4” Dia. x

50 Lbs.

Zoom Spout OilersDiversiTechPull-A-Spout Oiler

Features: • All purpose oiler with a 14in. telescoping spout • Zooms out for long shots, and in for short shots, even zooms around corners • Squeeze bottle action • Perfect lubricant for general industrial use • Contains four ounces of finest quality carbon free, rust and oxidation inhibited lubricating oil • Plastic container won’t short out around electrical connections • No leakage


Part Number Depth (in) Height (in) Width (in) Odor Weight (lbs) DescriptionCO-1 1.64 7.1 1.64 Petroleum Oil Odor 0.3 Pull-A-Spout Oiler - 4 Oz.


Installation Supplies 43

TechnicalReferences

SPRING/SUMMER 2013


Technical Reference 1



Date post:	07-Apr-2023
Category:	Documents
Upload:	khangminh22
View:	1 times
Download:	0 times

PARTS AND SUPPLIES - Amazon S3

Documents